A cosmetic mirror is designed to magnify your face by a factor of 1.32 when your face is 19.5 cm in front of it.
a. Calculate the radius of curvature of the mirror (in cm)

To calculate the average air resistance acting on the winner of the race, we need to use the formula:

Work = Force * Distance

In this case, the work done against air resistance is given as 3,360,000 J. However, we do not have the distance traveled or the time taken to complete the race.

Without knowing the distance or time, it is not possible to calculate the average air resistance. Additional information, such as the speed or any other relevant data, would be required to determine the average air resistance.

Learn more about work done, here:

https://brainly.com/question/13662169

#SPJ1

Your question is incomplete, but your full question can be:

During the race competitors work against air resistance. The work done against air resistance by the winner of the race was 3,360,000 J. Calculate the average air resistance acting on the winner of the race.

Electricity is supplied to a school along a cable of total resistance 0.5 ohms with the maximum current drawn from the mains as 100A. the maximum energy dissipated as heat for 1hr is 18,000,000 Joules (J).

The following formula may be used to determine the maximum energy that was lost as heat during one hour:

Power x Time equals Energy

where authority is granted by

I2R = Power

where R denotes the overall resistance of the wire and I denotes the current flowing through it.

Given that the maximum current drawn from the mains is 100A and that the total resistance of the cable is 0.5 ohms, we may determine the power wasted as follows:

5000W is equal to (100A)2 times 0.5.

We must convert one hour to seconds in order to determine the amount of energy lost throughout that time. Since 3600 seconds make up 1 hour, we have:

Time = 3600s

Therefore, the amount of energy that was lost as heat in an hour is:

So the maximum energy dissipated as heat for 1 hour is 18,000,000 Joules (J).

To know more about Energy :

https://brainly.com/question/1932868

#SPJ1.

A force of 166.8 N is needed to make the weight start moving.

The force needed to make the 20 kg weight start moving can be calculated using the formula F = μsN,

where F is the force required to overcome static friction,

μs is the coefficient of static friction,

and N is the normal force exerted on the weight by the turf.

The normal force is equal to the weight of the object,

which is 20 kg multiplied by the acceleration due to gravity, 9.81 [tex]m/s^2[/tex],

so N = 196.2 N.

Substituting the given values into the formula,

we have F = 0.85 × 196.2 N = 166.8 N.

Static friction is the force that prevents an object from moving when it is at rest on a surface. The coefficient of static friction is a measure of the grip between the two surfaces, with higher values indicating greater friction. In this case, the high coefficient of static friction between the weight and the football turf means that a relatively large force is needed to overcome the friction and start the weight moving.

Learn more about Static friction here:

https://brainly.com/question/17237604

#SPJ1

Answer:

Explanation:

The three concepts of rational choice theory are:

a) The force exerted by the right hind leg is 400 lb.

b) The position of the center of gravity of the horse is 6.67 ft from the left hind leg.

a) According to the problem, the total weight of the horse is 1000 lb, and the left hind and right forelegs each support 300 lb.

That means the weight supported by the right hind leg is:

Weight supported by right hind leg = Total weight - Weight supported by left hind leg - Weight supported by right foreleg

Weight supported by right hind leg = 1000 lb - 300 lb - 300 lb

Weight supported by right hind leg = 400 lb

Therefore, the force exerted by the right hind leg is 400 lb.

b) To calculate the position of the center of gravity of the horse, find the point where the weight of the horse can be considered to act. Assuming that the horse is symmetric, this point should be exactly halfway between the left and right legs that support the weight.

So, calculate the position of the center of gravity as follows:

Position of center of gravity = Distance from left leg to center of gravity

Distance from left leg to center of gravity = Distance from right leg to center of gravity

Distance from left leg to center of gravity = (Weight supported by right hind leg) × (Distance between legs) / (Total weight supported by both hind legs)

Distance from left leg to center of gravity = (400 lb) × (10 ft) / (600 lb)

Distance from left leg to center of gravity = 6.67 ft

Therefore, the position of the center of gravity of the horse is 6.67 ft from the left hind leg.

Find out more on force here: https://brainly.com/question/12970081

#SPJ1

The force on each side of the loop is 5.1 × 10^-5 N in the direction perpendicular to the wire and the magnetic field, and the direction of the force is determined by the right-hand rule.

The force on each side of the loop can be calculated using the formula F = BIL, where F is the force, B is the magnetic field, I is the current, and L is the length of the wire.

First, we need to find the magnetic field inside the solenoid. The magnetic field inside a solenoid is given by B = μ₀nI, where μ₀ is the permeability of free space, n is the number of turns per unit length, and I is the current.

In this case, the magnetic field inside the solenoid is B = μ₀nI = (4π × 10^-7 T·m/A)(25 turns/cm)(17.0 A) = 0.017 T.

Since the loop is perpendicular to the magnetic field, the angle between the current and the magnetic field is 90 degrees, and the force on each side of the loop is given by F = BIL. The length of each side of the square loop is L = 8.0 cm/4 = 2.0 cm.

Therefore, the force on each side of the loop is F = (0.017 T)(0.15 A)(2.0 cm) = 5.1 × 10^-5 N.

For more such questions on magnetic

https://brainly.com/question/14411049

#SPJ11

i) The slope of the line (m) would be ln(a), and the intercept (c) would be 0.

ii)  The slope and intercept obtained from the linearized equations provide valuable information about the relationship between the variables involved.

To linearize the given equations, we need to rewrite them in a linear form. Let's work through each equation:

(i) Y = aX¹

To linearize this equation, we can take the natural logarithm (ln) of both sides:

ln(Y) = ln(aX¹)

Using the logarithmic property, we can simplify it as:

ln(Y) = ln(a) + ln(X¹)

Now, we can introduce a new variable, let's say ln(Y), and rewrite the equation as:

ln(Y) = ln(a) + X¹ln(X)

Now, we have a linear equation in the form Y' = mX' + c, where Y' = ln(Y), X' = ln(X), m = ln(a), and c = 0. In this linearized form, Y' would be plotted on the y-axis, and X' would be plotted on the x-axis. The slope of the line (m) would be ln(a), and the intercept (c) would be 0.

(ii) C = aT + BT²

To linearize this equation, we can introduce a new variable, let's say Z, defined as Z = C/T. Now, we can rewrite the equation as:

Z = a + BT

Now, we have a linear equation in the form Z = mT + c, where Z = C/T, m = B, and c = a. In this linearized form, Z would be plotted on the y-axis, and T would be plotted on the x-axis. The slope of the line (m) would be B, and the intercept (c) would be a.

By linearizing the equations, we can transform the nonlinear relationships into linear relationships, which allows for easier analysis and interpretation of the data. The slope and intercept obtained from the linearized equations provide valuable information about the relationship between the variables involved.

For more such questions on slope

https://brainly.com/question/30481418

#SPJ11

* **Step 1: Identify the relevant information.**

We are given the following information:

 * The initial velocity of the puck is 28.0 m/s horizontally.

 * The height of the platform above the ground is 2.00 m.

 * We can neglect air resistance.

* **Step 2: Set up the equations.**

We can use the following equations to solve for the direction of the velocity of the puck just before it hits the ground:

 * $v_y = v_0y + at$

 * $y = y_0 + v_0yt + \frac{1}{2}at^2$

Where:

 * $v_y$ is the final velocity in the vertical direction

 * $v_0y$ is the initial velocity in the vertical direction

 * $a$ is the acceleration due to gravity (9.8 m/s^2)

 * $t$ is the time

 * $y$ is the vertical position

 * $y_0$ is the initial vertical position

* **Step 3: Solve for the unknowns.**

We can solve for the final velocity in the vertical direction using the following equation:

```

v_y = v_0y + at

```

Plugging in the known values, we get:

```

v_y = 0 + (-9.8) t

```

```

v_y = -9.8t

```

We can solve for the time using the following equation:

```

y = y_0 + v_0yt + \frac{1}{2}at^2

```

Plugging in the known values, we get:

```

2 = 0 + (0) t + \frac{1}{2}(-9.8)t^2

```

```

4 = -4.9t^2

```

```

t^2 = -0.816

```

```

t = -0.90

```

We can now solve for the final velocity of the puck using the following equation:

```

v_y = -9.8t

```

Plugging in the known value for $t$, we get:

```

v_y = -9.8(-0.90)

```

```

v_y = 8.82 m/s

```

The final velocity of the puck in the vertical direction is 8.82 m/s downward.

* **Step 4: Find the angle.**

The angle of the velocity of the puck can be found using the following equation:

```

\theta = \tan^{-1} \left ( \frac{v_y}{v_x} \right )

```

Plugging in the known values for $v_y$ and $v_x$, we get:

```

\theta = \tan^{-1} \left ( \frac{8.82}{28.0} \right )

```

```

\theta = 12.6^\circ

```

Therefore, the direction of the velocity of the puck just before it hits the ground is 12.6 degrees below the horizontal.

Answer:

Explanation:

The following statements are true regarding the area of circles and sectors:

The area of a circle depends on the length of the radius.

The area of a sector depends on the ratio of the central angle to the entire circle.

The area of a sector can be used to find the area of a circle.

The total mechanical energy at point A is 617,400 J, and the velocity of the coaster at point A is 25 m/s, the velocity of the coaster at point B is 34.4 m/s. and the highest hill the coaster could have gotten over before point A with no additional mechanical energy is 63 m.

To solve this problem, we can use the conservation of mechanical energy, which states that the sum of kinetic energy and potential energy is constant in a closed system where there is no work done by non-conservative forces like friction. We can use this principle to find the answers to the questions.

a) The Total Mechanical Energy of the rollercoaster at Point A

The total mechanical energy of the rollercoaster at point A is the sum of its potential energy and kinetic energy. At point A, the rollercoaster is at its highest point, so its kinetic energy is zero. Therefore, the total mechanical energy at point A is equal to the potential energy, which is given by:

mgh = 1000 kg × 9.8 m/s^2 × 63 m = 617,400 J

b) The velocity of the coaster at point A

To find the velocity of the coaster at point A, we can use the conservation of mechanical energy principle again. At point A, all of the potential energy is converted into kinetic energy. Therefore, we can write:

1/2 mv^2 = mgh

where m is the mass of the rollercoaster, v is the velocity at point A, g is the acceleration due to gravity, and h is the height of point A relative to point E. Solving for v, we get:

v = sqrt(2gh) = sqrt(2 × 9.8 m/s^2 × 63 m) = 25 m/s

Therefore, the velocity of the coaster at point A is 25 m/s.

c) The velocity of the coaster at point B

To find the velocity of the coaster at point B, we can use the conservation of mechanical energy principle again. At point B, the rollercoaster is at a height of 42 m above the ground. Therefore, the potential energy at point B is:

mgh = 1000 kg × 9.8 m/s^2 × 42 m = 411,600 J

At point B, some of the potential energy is converted into kinetic energy, so we can write:

1/2 mv^2 + mgh = mgh_D

where v is the velocity at point B, h is the height of point B relative to point E, and h_D is the height of point D relative to point E. Solving for v, we get:

v = sqrt(2(mgh_D - mgh)/m) = sqrt(2(8780 J)/1000 kg + 2gh) = 34.4 m/s

Therefore, the velocity of the coaster at point B is 34.4 m/s.

d) The highest hill the coaster could have gotten over before point A with no additional mechanical energy

If the rollercoaster had no additional mechanical energy, its total mechanical energy at point A would be equal to its potential energy, which we calculated in part (a) to be 617,400 J. Therefore, the maximum height that the rollercoaster could reach without any additional mechanical energy is given by:

mgh_max = 617,400 J

Solving for h_max, we get:

h_max = 617,400 J / (1000 kg × 9.8 m/s^2) = 63 m

So, the highest hill the coaster could have gotten over before point A with no additional mechanical energy is 63 m.

Therefore, The coaster has a total mechanical energy of 617,400 J at point A, a velocity of 25 m/s, a velocity of 34.4 m/s, and a maximum hill height of 63 m that it could have traversed without using any further mechanical energy.

To learn more about Kinetic Energy click:

brainly.com/question/26472013

#SPJ1

Answer:

(a) The initial gravitational potential energy of the lead can be calculated using the formula:

E = mgh

where E is the potential energy, m is the mass, g is the acceleration due to gravity, and h is the height. Substituting the given values, we get:

E = (0.5 kg) × 10 m/s² × 25 m = 125 J

Therefore, the initial gravitational potential energy of the lead is 125 J.

(b) When the lead reaches the ground, all of its potential energy is converted into kinetic energy. The kinetic energy can be calculated using the formula:

E = (1/2)mv²

where E is the kinetic energy, m is the mass, and v is the velocity. At the moment of impact, the lead has a velocity of:

v = √(2gh) = √(2 × 10 m/s² × 25 m) = 10 m/s

Substituting the given values, we get:

E = (1/2) × 0.5 kg × (10 m/s)² = 25 J

Therefore, the kinetic energy of the lead on reaching the ground is 25 J.

(c) The energy gained by the lead due to the impact is converted into internal energy, which raises the temperature of the lead. The amount of energy required to raise the temperature of the lead can be calculated using the specific heat capacity formula:

Q = mcΔT

where Q is the energy gained, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature. The specific heat capacity of lead is 128 J/kg°C. Substituting the given values, we get:

125 J - 25 J = (0.5 kg) × 128 J/kg°C × ΔT

ΔT = (100 J) / (64 J/kg°C) = 1.56°C

Therefore, the rise in temperature of the lead is 1.56°C.

(d) The energy transfers that have occurred from the moment the lead strikes the ground until it has cooled to air temperature again are:

Conversion of potential energy to kinetic energy upon impact

Conversion of kinetic energy to internal energy upon impact, raising the temperature of the lead

Transfer of heat energy from the lead to the surrounding air, as the lead cools down to air temperature

It is reasonable to conclude that science teachers generally agree that practical science is beneficial. Therefore, option (A) is correct.

Practical science refers to hands-on activities, experiments, and applications of scientific concepts in real-world settings. Science teachers, who are experts in their field and experienced in teaching science, understand the importance of practical science in facilitating students' understanding, engagement, and application of scientific principles.

Practical science allows students to develop critical thinking, problem-solving, and inquiry skills, as well as promoting a deeper understanding of scientific concepts. It also fosters curiosity, creativity, and a passion for science, making it an effective and essential component of science education.

Learn more about practical science, here:

https://brainly.com/question/99884

#SPJ1

The force produced on the larger piston is 8000 N.

Force is the product of mass and acceleration

To calculate the force produced in the larger piston, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute thee values into equation 1 and solve for F

Learn more about force here: https://brainly.com/question/25573309

#SPJ1

The work done is the amount of energy transferred by the force to move an object. Work done equals the product of force and displacement. It is the scalar quantity.

Work done, W = F.d, where F is the force and d is the displacement of the object. The unit of work done is N/m or joule. Hence, the unit of work done is the joule. Thus, the correct option is option D.

Energy is defined as the ability to do work. Energy is of two types and they are potential and kinetic energy. Potential energy is the energy possessed by the object when the object is at rest and the kinetic energy is the energy possessed by the object when it is in motion.

Thus, the kinetic energy is maximum at X and Z. Thus, the ideal solutions are options B and D. The potential energy is maximum at W. Hence, the correct option is A.

To learn more about potential and kinetic energy:

https://brainly.com/question/1413008

#SPJ1

After considering all the given data we conclude that the the amount of energy needed to vaporize the water completely is 722.24 kJ.

The energy needed to vaporize water is reffered to as the heat of vaporization. The heat of vaporization of water is 2257 kJ/kg³.

Here we have to apply the principles of vaporization to derive a formula to evaluate the energy needed to vaporize 0.32 kg of water,

Then

Energy = Heat of vaporization x Mass of water

Energy = 2257 kJ/kg x 0.32 kg

Energy = 722.24 kJ

Then, the energy needed to totally vaporize the water being heated is 722.24 kJ.

To learn more about vaporization

https://brainly.com/question/26306578

#SPJ1

The velocity is [tex]10\hat{i}-16\hat{j} m/s[/tex]  and the acceleration is [tex]-16\hat{i} -8\hat{j} m/s^2[/tex]

The given equations are:

[tex]v_x = 50 - 16t\\y = 100 - 4t^2[/tex]

x = 0, when t = 0

To plot the path of the particle, we need to eliminate t from the given equations and express y in terms of x. Using the given information, we have:

[tex]t = (50 - v_x) / 16\\y = 100 - 4t^2 = 100 - 4[(50 - v_x) / 16]^2[/tex]

Simplifying the above equation, we get:

[tex]y = (25/2) - (5/4)v_x + (1/32)v_x^2[/tex]

This is the equation of the path followed by the particle.

To determine the velocity and acceleration when y = 0, we need to find the corresponding value of [tex]v_x[/tex]. Setting y = 0 in the above equation, we get:

[tex]v_x = 20 or v_x = 10[/tex]

When v_x = 20, the particle is moving in the positive x-direction. The velocity and acceleration can be calculated as follows:

Velocity =[tex](v_x, v_y) = (20, -32)[/tex]

Acceleration = [tex](a_x, a_y) = (-16, -8)[/tex]

When [tex]v_x = 10[/tex], the particle is moving in the negative x-direction. The velocity and acceleration can be calculated as follows:

Velocity =[tex](v_x, v_y) = (10, -16)[/tex]

Acceleration = [tex](a_x, a_y) = (-16, -8)[/tex]

Therefore, the vector representation of the velocity and acceleration when y = 0 are:

For[tex]v_x = 20[/tex]: Velocity = (20, -32) m/s; Acceleration = (-16, -8) [tex]m/s^2[/tex]

For[tex]v_x = 10[/tex]: Velocity = (10, -16) m/s; Acceleration = (-16, -8)[tex]m/s^2[/tex]

For more question on acceleration visit:

https://brainly.com/question/460763

#SPJ11

The specific satirical element used by a writer would depend on the context and purpose of their writing.

As an AI language model, I do not have access to a specific excerpt. However, satire is a literary technique used to expose and criticize human vices, foolishness, or shortcomings through humor, irony, or exaggeration. It often employs irony, sarcasm, or ridicule to expose and critique societal issues or individual behavior. The most common satirical elements include hyperbole, parody, irony, and sarcasm.

For example, hyperbole is an exaggeration used to make a point, such as when a satirist might exaggerate the absurdity of a situation or person. Parody is the use of imitation to ridicule or criticize a particular style or individual. Irony is the use of language to convey a meaning opposite to its literal sense. Sarcasm is the use of words to convey contempt or ridicule, often by saying the opposite of what is meant.

For more such questions on satirical

https://brainly.com/question/30097283

#SPJ11

Answer:

a

Explanation:

I fact checked

Poor health and safety practices when using non-ionizing and ionizing radiation technologies can have significant consequences. Here are some potential consequences and the prevention and safety measures employed to mitigate them.

Consequences of poor health and safety:

Non-Ionizing Radiation:

Ionizing Radiation:

Prevention and safety measures:

Non-Ionizing Radiation:

Ionizing Radiation:

know more about ionizing radiation here:

https://brainly.com/question/17095776

#SPJ11

The example provided is most closely related to option C: Performance accomplishments.

Setting a mileage goal each week and becoming more confident about finishing the race indicates that Tina is actively working towards her goal of running a 5k race. By gradually increasing her mileage and gaining confidence, she is achieving performance accomplishments, which involve personal achievements and successful experiences.

Physiological states refer to the influence of one's physical and emotional condition on their confidence and motivation. Verbal persuasion involves receiving encouragement or positive feedback from others. Vicarious experience entails gaining confidence by observing and learning from others' successes.

Learn more about Performance accomplishments, here;

https://brainly.com/question/2065380

#SPJ1

The cliff is approximately 621 meters away from the walker.

To determine the distance to the cliff, we can use the fact that sound travels at a constant speed through the air. By measuring the time it takes for the echo to return, we can calculate the distance traveled by the sound wave.Given that the time taken for the echo to come back is 1.8 seconds and the speed of sound is 345 m/s, we can use the formula: distance = speed × time.

Therefore, the distance to the cliff can be calculated as follows:

Distance = Speed of sound × Time

= 345 m/s × 1.8 s

= 621 meters.

This calculation assumes that the sound waves traveled in a straight line to the cliff and back, without any significant obstructions or reflections. It's important to note that this method provides an estimation of the distance, as environmental factors like wind and temperature can affect the speed of sound.

For more such questions on approximately

https://brainly.com/question/31487715

#SPJ8

Given that the force between two charged particles, we'll call charge 1 and 2 is, [tex]\vec F_{0}=200 \ N[/tex]. The question asks us to find the new force between charges 1 and 2 if the charge on 1 increases by 3 times and the charge on 2 decreases by 4 times.

Equation to calculate the electric force between two charged particles:

[tex]\vec F_e=k_e\frac{q_1q_2}{r^2} \\\\ k_e=Coulomb's \ Constant= 8.99 \times 10^9 \ \frac{Nm^2}{C^2}\\[/tex]

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[tex]\vec F_0=k_e\frac{q_1q_2}{r^2} =200 \ N \ and \ \boxed{\vec F_f=k_e\frac{(3 q_1)(\frac{1}{4} q_2)}{r^2} }[/tex]

[tex]\Longrightarrow \vec F_f=k_e\frac{(3 q_1)(\frac{1}{4} q_2)}{r^2} \Longrightarrow \vec F_f=\frac{3}{4} k_e\frac{q_1 q_2}{r^2} \Longrightarrow \vec F_f=\frac{3}{4}(200) \Longrightarrow \boxed{\boxed{\vec F_f=150 \ N}}[/tex]

Thus, the new force would be 150 N.

The new force will be 150N

The force between two charged objects is given by Coulomb's law, which states that the force is proportional to the product of the charges and inversely proportional to the square of the distance between them. Mathematically, Coulomb's law can be expressed as:

F = k * (q1 * q2) / r^2

where F is the force, k is Coulomb's constant, q1 and q2 are the charges of the two objects, and r is the distance between them.

In this problem, we are given that the force between the two objects is 200N. Let us assume that the charges of the two objects are q1 and q2, respectively. Using Coulomb's law, we can write:

200 = k * (q1 * q2) / r^2

Now, we are told that the charge of one object increases by a factor of 3, and the charge of the other object decreases by a factor of 4. Let us call the new charges q1' and q2', respectively. We can write:

q1' = 3 * q1

q2' = (1/4) * q2

Substituting these expressions into Coulomb's law, we get:

F' = k * (q1' * q2') / r^2

= k * [(3 * q1) * ((1/4) * q2)] / r^2

= k * (3/4) * (q1 * q2) / r^2

= (3/4) * F

Therefore, the new force between the two charged objects is 3/4 times the original force, or 150N.

In summary, the force between two charged objects is proportional to the product of the charges and inversely proportional to the square of the distance between them. If one charge increases by a factor of 3 and the other charge decreases by a factor of 4, the new force between them will be 3/4 times the original force. This is because the product of the charges is multiplied by (3/4) in Coulomb's law.

Know more about Coulomb's law here:

https://brainly.com/question/506926

#SPJ11

A) The nature of motion is decelerating motion and the value of AB  = 5m. B) Between B and C the force of friction fexerted on 2.5m and the force of friction exerted on (C) between B and C is 17.6N

(a) Applying Newton's second law between A and B, determine the nature of motion and the value of AB such that V=3m/s.

From A to B, the ball experiences a force of friction and the gravitational force acting downwards. The force of friction opposes the motion of the ball, while the gravitational force acts in the direction of motion.

Since the ball is launched from A without any initial speed, it will initially move downwards due to the force of gravity until it reaches its lowest point at B. To determine the value of AB such that V=3m/s, we can use the conservation of energy principle.

The potential energy at A is zero, and the kinetic energy at B is (1/2)mv^2, where m is the mass of the ball and v is the velocity at B. The work done by the force of friction is fABd, where d is the distance from A to B. The work done by the gravitational force is -mg(h/2), where h is the height difference between A and B. Thus, we have (1/2)mv^2 = fABd - mg(h/2).

Since the ball is moving upwards at B, the net force acting on it is in the upward direction. Using Newton's second law, we have fAB - mg = ma, where a is the acceleration of the ball. Since the ball is moving upwards, a = -g. Solving these equations simultaneously, we obtain AB = 5m and the nature of motion is a decelerating motion.

(b) Between B and C, the force of friction f exerted on (C) is supposed to be constant. Determine its value such that Vc=2m/s and BC=2.5m.

Between B and C, the ball moves upwards due to the force of friction and the gravitational force acting downwards. To determine the force of friction f, we can use the conservation of energy principle again. The potential energy at B is mgh/2, where h is the height difference between A and B.

The kinetic energy at C is (1/2)mv^2, where v is the velocity at C. The work done by the force of friction is fBCd, where d is the distance from B to C. Thus, we have (1/2)mv^2 = fBCd + mgh/2. Using Newton's second law, we have fBC - mg = ma, where a is the acceleration of the ball. Since the ball is moving upwards, a = -g. Solving these equations simultaneously and substituting the given values, we obtain f = 17.6N. Therefore, the force of friction exerted on (C) between B and C is 17.6N.

Know more about Force of friction here:

https://brainly.com/question/24386803

#SPJ11

A 6 cm object is 8 cm from a convex lens that has a focal length of 2.7 cm. The image is 4 cm from the lens. The height of the image is 3 cm

To find the height of the image, we can use the magnification formula:

Magnification (M) = Image height (h') / Object height (h) = Image distance (d') / Object distance (d)

We are given:
- Object height (h) = 6 cm
- Object distance (d) = 8 cm
- Image distance (d') = 4 cm

We need to find the image height (h').

First, let's find the magnification (M) using the formula:

M = d' / d = 4 cm / 8 cm = 0.5

Now, we can find the image height (h'):

h' = M * h = 0.5 * 6 cm = 3 cm

So, the height of the image is 3 cm.

The question was Incomplete, Find the full content below :

A 6 cm object is 8 cm from a convex lens that has a focal length of 2.7 cm. The image is 4 cm from the lens. The height of the image is ___ cm.

Know more about the Convex lens here :

https://brainly.com/question/28039799

#SPJ11

The difference between the distance travelled by the t-shirt and the person's position is 3.07 m.

The time of motion of the t-shirt is calculated as follows;

t = √ ( 2h / g )

where;

t = √ ( 2 x 27.7 / 9.8 )

t = 2.4 s

The maximum horizontal distance travelled by the t-shirt is calculated as follows;

d = Vₓt

where;

d = (25.8 m/s x cos(63.6) ) x 2.4 s

d = 27.53 m

The difference between the distance travelled by the t-shirt and the person's position is calculated as;

= 27.53 m - 30.6 m

= -3.07 m

Learn more about horizontal distance here: https://brainly.com/question/16411732

#SPJ1

To draw a schematic diagram effectively, there are several key points to consider. First, it is important to understand the system or circuit you are trying to represent. Second, organize the diagram in a logical and readable manner. Third, maintain clarity and simplicity in the diagram. Lastly, follow standard practices and guidelines for drawing schematic diagrams. We should be aware of while drawing them because for understanding the system.

A schematic diagram is a graphical representation that depicts the electrical connections and components of a system. It is commonly used in various fields such as electronics, electrical engineering, and industrial automation. To draw a schematic diagram effectively, there are several key points to consider.

Firstly, it is important to understand the system or circuit you are trying to represent. Analyze the components and their relationships, and determine the appropriate symbols to represent each component accurately. Use standard symbols and conventions to ensure consistency and easy interpretation by others.

Secondly, organize the diagram in a logical and readable manner. Arrange components and connections in a way that reflects their physical arrangement or the flow of signals. Use clear and concise labeling to identify each component and connection point.

Thirdly, maintain clarity and simplicity in the diagram. Avoid cluttering the diagram with unnecessary details. Focus on the key elements and connections that are essential for understanding the system.

Lastly, follow standard practices and guidelines for drawing schematic diagrams. This includes using consistent wire and connection symbols, labeling voltage and current values, and providing necessary annotations or notes for clarification.

Drawing a schematic diagram requires a good understanding of the system, adherence to standard symbols and conventions, logical organization, and clarity. By following these guidelines, you can create schematic diagrams that effectively convey the desired information. Remember, practice and attention to detail are essential for improving your schematic diagram drawing skills.

For more such information on:  schematic diagram

https://brainly.com/question/27578538

#SPJ11

India's employment situation can be improved by recasting the present educational system towards the implementation of scientific discoveries in daily life.

India's employment situation has been a concern for a long time now, and it is true that structural factors are responsible for the high unemployment rate.

However, the current slowdown has made things worse, and there is a need for urgent action to address the situation. One way to improve the employment situation in India is to recast the present educational system towards the implementation of scientific discoveries in daily life.

The implementation of scientific discoveries in daily life can help in the development of new industries and the growth of existing ones. This can create new jobs and lead to economic growth.

For example, the implementation of renewable energy technologies can create jobs in the manufacturing, installation, and maintenance of solar panels and wind turbines. Similarly, the implementation of biotechnology in agriculture can lead to the development of new crop varieties and the creation of jobs in the agricultural sector.

Furthermore, the implementation of scientific discoveries can also lead to the development of new products and services that can be exported. This can help in the growth of the economy and create new jobs in the process. For example, the development of new software products and services can create jobs in the IT sector.

In order to achieve this, there is a need to recast the present educational system in India. This can be done by emphasizing the teaching of science, technology, engineering, and mathematics (STEM) subjects.

Furthermore, there is a need to improve the quality of education in India by investing in research and development, and by promoting entrepreneurship and innovation. This can help in the creation of a knowledge-based economy that can create new jobs and lead to economic growth.

For more such questions on employment visit:

https://brainly.com/question/30872085

#SPJ11

Refer to the attached images.

The force between two charged particles can be calculated using Coulomb's Law:

[tex]F = (k * |q1 * q2|) / r^2[/tex]

F is the force, k is Coulomb's constant (8.99 x 10^9 N m^2/C^2), q1 and q2 are the charges of the particles, and r is the separation distance between them.

For q1 and q2:

[tex]F1 = (k * |q1 * q2|) / r1^2\\= (8.99 x 10^9 N m^2/C^2) * (66.3 x 10^-{6} C) * (108 x 10^{-6 }C) / (0.550 m)^2[/tex]

For q2 and q3:

[tex]F2 = (k * |q2 * q3|) / r2^2\\= (8.99 x 10^9 N m^2/C^2) * (108 x 10^{-6} C) * (43.2 x 10^{-6} C) / (0.550 m)^2[/tex]

The net force on q2 is the vector sum of F1 and F2:

Net Force = F2 - F1

By calculating these values, we can determine the net force on particle q2.

Learn more about net force, here:

https://brainly.com/question/31822689

#SPJ1

Explanation:

500 ml * 15 dtts/ml  / ( 24 hrs/ day * 2 days * 60 min / hr ) = 2.6 gtts/min

To calculate the net force on particle q2, we need to calculate the individual forces exerted by q1 and q3 on q2, considering their charges and separation distances.

Using Coulomb's Law, the force between two charged particles can be calculated as:

[tex]F = (k * |q1 * q2|) / r^2[/tex]

where F is the force, k is Coulomb's constant (8.99 x 10^9 N m²/C²), q1 and q2 are the charges of the particles, and r is the separation distance between them.

For q1 and q2:

F1 = (8.99 x 10^9 N m²/C²) * (|-66.3 x 10^-6 C * 108 x 10^-6 C|) / (0.550 m)²

For q2 and q3:

F2 = (8.99 x 10^9 N m²/C²) * (|108 x 10^-6 C * -43.2 x 10^-6 C|) / (0.550 m)²

The net force on q2 is the vector sum of F1 and F2:

Net Force = F1 + F2

By calculating these values and performing the addition, we can determine the net force acting on particle q2.

Therefore, To calculate the net force on particle q2, we need to calculate the individual forces exerted by q1 and q3 on q2, considering their charges and separation distances.

Learn more about Coulomb's Law, here:

https://brainly.com/question/28040775

#SPJ1