A crane is used to lift a steel beam on a building site. The crane does 250 kJ of work against gravity
in order to lift the steel beam a vertical distance of 20 m. Calculate the weight of the steel beam.

The greater the objects mass, and closer it is,the greater its gravitational force will be is the statement that best describe the gravitational force of an object.

According to the Newtons Law of Gravitation states that the gravitational force between two objects is directly proportional to the product of two  objects masses. And inversely proportional to the square of the distance between two objects.

F=G(m1*m2/r*r)

F= force

G= gravitational constant  

m1,m2= mass of object

r= distance between two masses.

Newton formula to measure gravitational force.

To know more about the topic please click here.  

https://brainly.com/question/72250

The system of equations that can be used to represent the radius of the mass of the cylinder is 11,000 grams is m = M(r) × π × r².

We can calculate the radius of the cylinder using the formula for cylinder volume. Cylinder radii (r) = √(V / π × h), where V denotes a cylinder's volume, h denotes its height, and (Pi) denotes a mathematical constant with a roughly 3.14 value.

The radius of a barium cylinder with a height of 2 inches determines the mass of the cylinder, according to the function M(r) = 7.18872.

The following formula determines the cylinder's mass,
m = M(r) × π × r²

Substitute, the given terms

11000 = 7.18872 × 3.14 × r²

r = 22.06 inches.

To know more about mass visit:

https://brainly.com/question/13656770

#SPJ4

Complete question is " The mass of a cylinder made of barium with a height of 2 inches depends on the radius of the cylinder as defined by the

function M(r) = 7.18872.

Which system of equations and solution can be used to represent the radius if the mass of the cylinder is 11,000 grams?

Round to the nearest hundredth of an inch".

Answer:

It is C on edge

Explanation:

Took the test and got it right R = 22.07

A dynamometer, or "dyno" test, is the most common method for measuring an engine's torque and power. This test is typically performed by connecting an engine's output shaft to a resistive load setup.

Torque is a force that can cause an object to rotate around an axis. In the same way that force causes an object to accelerate in linear kinematics, torque causes an object to acquire angular acceleration. Torque is measured as a vector quantity. Torque is a rotational or twisting force expressed as a force. Vehicle engines generate torque by rotating about an axis. It can be thought of as a vehicle's strength. Torque propels a sports car from 0 to 60 kmph in seconds. Torque is also what propels large trucks hauling heavy loads.

Here,

The most common method for measuring an engine's torque and power is with a dynamometer, also known as a "dyno" test. Typically, this test is carried out by connecting an engine's output shaft to a resistive load setup.

To know more about torque,

https://brainly.com/question/30284972

#SPJ4

To calculate the acceleration of the sailboat, we need to use Newton's second law of motion, which states that force equals mass multiplied by acceleration (F = ma).

Given that the force on the boat is 895N and the mass of the boat and crew is 655kg, we can rearrange the equation as follows:

a = F / m

where a = acceleration, F = force, and m = mass.

Plugging in the known values, we get:

a = 895N / 655kg

So, the acceleration of the sailboat is approximately 1.37 m/s².

It's important to note that this is only an approximation of the acceleration as the force acting on the sailboat may be subject to change due to wind, water currents, etc. This equation does not take into account the resistance of the water, which is also a force that will act on the boat and will affect its acceleration.

The acceleration of the sailboat is 1.37 m/s² if its crew has a mass of 655kg and the force on the boat is 895N.

According to Newton's Second Law of Motion, acceleration (gaining speed) happens when a force acts on a mass (object). Force is a product of mass and acceleration. An object with a mass changes its velocity in response to a push or pull.

Force is an external agent that has the power to alter the resting or moving state of a body. The measurement of a change in an object's velocity is called acceleration.

The acceleration of the sailboat can be calculated using the formula: acceleration = force /mass

In this case, the force is 895 N and the mass is 655 kg, so the acceleration would be:

Acceleration = 895 N / 655 kg = 1.37 m/s²

Hence we can say the acceleration is 1.37 m/s² if its crew has a mass of 655kg and the force on the boat is 895N.

Learn more about Newton's Laws of motion at:

https://brainly.com/question/28171613

Earth has a lower amount of carbon in the atmosphere than planets such as Venus and Mars because it consists of photosynthetic plants which utilize a high amount of carbon dioxide in their photosynthetic process.

According to the report published by NASA, the concentration of carbon in the earth's atmosphere is found to be 412 parts per million. This significantly expresses the rise of about 47% since the initiation of the Industrial age.

On planets such as Venus and Mars, there is no existence of life. So, carbon gradually accumulated in its atmosphere. But when you talk about the Earth which comprises a huge diversity of organisms that utilizes a large of carbon and its components in their process which supports their metabolism.

Therefore, due to the presence of photosynthetic organisms on the earth's surface, Earth has a lower amount of carbon in the atmosphere than planets such as Venus and Mars.

To learn more about Carbon on earth, refer to the link:

brainly.com/question/21453409

#SPJ4

Note for information: For details on the usage of single-pole circuit breakers as the disconnecting mechanism, see 240.15(B).

In order to simultaneously disconnect all ungrounded wires at the branch circuit's origin, each multiwire branch circuit must be equipped with this capability.

Branch circuits that fall within this article's definition must be allowed as multiwire circuits. It is okay to think of a multiwire circuit as having numerous circuits. The same panelboard or other similar distribution equipment must be the source of all wires in a multiwire branch circuit.

Each multiwire branch circuit must group its grounded and ungrounded circuit cables in accordance with 200.4. (B).

All loads must be supplied by line-to-neutral multiwire branch circuits.

The first exception is a multiwire branch circuit that serves a single piece of used equipment.

Exception No. 2: The multiwire branch circuit's ungrounded wires must all be opened simultaneously by the branch-circuit overcurrent mechanism.

Learn more about Circuit here:

https://brainly.com/question/27206933

#SPJ4

As a result, 10 g of oxygen gas contains 0.3125 moles of oxygen.

One mole of oxygen gas is equivalent to one gram of molecules. As a result, one mole of O2 gas is equal to one gram of oxygen molecules. O2 has a molecular mass of 32 grams. Its volume at STP is 22.4 L; its molar quantity is around 8 L, according to our calculations. In 10.0 g of O2, there are 1.51 x 10^23 molecules of O2.

The symbol for the unit is mol.

The number of moles formula is written as follows.

Here :  The formula for moles is as follows:

= Mass of material / Mass of one mole equals the number of moles.

=  10/ 1.51 x 10^23

= 0.3125

Learn more about moles Visit: brainly.com/question/13314627

#SPJ4

The amount of wavelength of light thick is the thumbnail x/y.

Given:

Wavelength of light= x

Thickness of thumbnail= y

The amount of wavelength thick the thumbnail is x/y

What is wavelength?

To know more about wavelength, click the link given below:

https://brainly.com/question/4112024

#SPJ1

An object rotates at an acceleration is inversely proportional to its moment of inertia when a torque is applied to it. Torque is defined mathematically as: τ = I α, where I is the moment of inertia and α is the angular acceleration.

I is usually given by the formula, I = m r².

In rotating motion, torque is the same as force in linear motion. It is the main factor that maintains an object's rotation.

Torque and rotational inertia replace force and mass, respectively, in the angular application of Newton's Second Law. The relationship between angular acceleration and torque is true when an object's rotational inertia is constant.

To know more about torque:

https://brainly.com/question/15585759

#SPJ4

Between two plates that are sliding past one another, a transform plate boundary forms.

Transform plate boundary: what is it?

To know more about transform plate boundary refer to:

https://brainly.com/question/30333290

#SPJ4

Answer: Order of magnitude is 4.

What is Magnitude?

-- In physics, magnitude is defined simply as “distance or quantity.”

--  It depicts the absolute or relative direction or size in which an object moves in the sense of motion.

-- It is used to express the size or scope of something.

--  In physics, magnitude generally refers to distance or quantity.

What is relative velocity?

-- The relative velocity is defined as the velocity of an object with respect to another observer.

-- It is the time rate of change of relative position of one object with respect to another object.

What is Height ?

-- the measurement from the bottom to the top of a person or thing

Learn more about mount everest from https://brainly.in/question/9701177.

#SPJ4

A random sample of N 45 oil changes has a 30% chance of taking less than 10 minutes to complete, according to the sample mean time.

Given that,

mean =

= 16.2 minutes

standard deviation =[tex]\sigma[/tex] = 3.3 minutes

n = 45

The sample size needs to be greater than or equal to 30. [tex]\mu[/tex]

A sample mean is a data set average. The sample mean can be used to compute a data set's central tendency, standard deviation, and variance. The sample mean can be used to compute population averages, among other things.

It is as simple as adding up the number of items in a sample set and then dividing that total by the number of items in the sample set to calculate the sample mean. The following formula can be used to calculate the sample mean using spreadsheet software and calculators:

Here, x is the sample mean, which tells us to add, xi is the total number of X-values, and n is the number of items in the data set.

Learn more about sample mean here:

https://brainly.com/question/26227836

#SPJ4

The x and y component of the vector are -18.32 m and 3.23 m respectively.

The x and y component of the vector is calculated by applying the following formula.

Bx = B cosθ

By = B sinθ

where;

The vector is located in negative x direction but positive y direction.

The angle of the vector from x axis = 90⁰ - 80⁰ = 10⁰

Bx = B cosθ  =  -18.6 m x cos ( 10 ) = -18.32 m

By = B sinθ = 18.6 m x sin ( 10 ) = 3.23 m

Learn more about x and y components here: https://brainly.com/question/27996986

#SPJ1

the magnitudes of the individual rotational torque about a given axis, and the net torque the about axis seems to be the sum of the different torques: →τnet=∑i|→τi|.equilibrium

An object may be under the influence of many forces, each of which may act at a different position on the item. Each force will then result in a torque. The total of the various torques is the net torque.

When an object is in static equilibrium, the resultant force and force exerted on it are both equal to zero. The force acting on an item is determined by multiplying its mass by its rate of acceleration.

to know more about torque visit:

https://brainly.com/question/29024338

#SPJ4

The weight of the object is  98 kg.m/s².

We are given that,

Acceleration due to gravity = g = 9.8m/s²

Mass of the object = m = 10 kg

An object's weight is calculated by multiplying its mass by the gravitational acceleration. To get a body's exact weight on a specific gravity field, apply the weight formula. Any mass that experiences weight does so because of gravity. The SI unit of weight is the Newton. The symbol for weight is W. Depending on the body's sensation of gravity, weight may change. The following are the basic weight-finding formulas:

W = mg (Newton),

Where W is the object's weight in Newton, m is its mass in kilogrammes, and g is its gravitational acceleration. The value of g on earth is 9.8 m/s².

W = 9.8m/s²× 10kg

W = 98 kg.m/s²

The complete question is,

The weight of an object is the product of its mass, m, and the acceleration of gravity, g (where g=9.8 m/s²). If an object’s mass is m=10. kg, what is its weight?

To know more about weight

https://brainly.com/question/470763

#SPJ4

Because momentum is a vector, a system's total momentum can be zero if there are multiple masses. A system of two objects with the same magnitude of momentum and moving directly toward one another, for example, will have a total momentum of zero.

The quantity of motion of the body is defined as momentum. It is measured by "mass velocity," because momentum depends on velocity, and it also depends on the direction of the body's motion. Momentum is a vector quantity because velocity is a vector and mass is a scalar quantity. Momentum equals mass multiplied by velocity. Momentum is defined as "mass moving." Because all objects have mass, if an object moves, it has momentum - its mass is in motion. Momentum is the amount of motion of a moving body, calculated as the product of its mass and velocity. Its formula is mass velocity.

Here,

Because momentum is a vector, the total momentum of a system can be zero if there are multiple masses. A system consisting of two objects with the same magnitude of momentum and moving in the same direction, for example, will have a total momentum of zero.

To know more about momentum,

https://brainly.com/question/22418297

#SPJ4

if a rock is hurled straight up from the earth's surface. The potential energy grows as the kinetic energy drops.

To learn more about energy refer to:

https://brainly.com/question/8101588

#SPJ4

The three formulas for velocity are: v = u + at ; v² = u² + 2as. ; and s = ut + ½at².

The term "velocity" refers to the rate and direction of motion and is measured using a vector scale. Simply said, velocity is the speed with which an object moves in a single direction.

There are three equations of velocity, also called the laws of constant acceleration, that apply when the acceleration is uniform. As a result, variables such as displacement (s), velocity (initial and final), time (t), and acceleration can be calculated using the provided equations (a). Because of this, they can only be used in situations where the acceleration is constant and the motion is linear. The three equations are: v = u + at ; v² = u² + 2as. ; and s = ut + ½at².

To learn more about velocity, click here:

https://brainly.com/question/1110335

#SPJ4

Answer:

The amount of work done by a crane in lifting a 10,000 kg car is estimated to be 3MJ. This means that the car was lifted to a height of 3,000m. It is important to note that this is an approximate value as the actual height could be different due to factors such as air resistance and efficiency of the crane.

Explanation:

The amount of work done by a crane in lifting a 10,000 kg car is estimated to be 3MJ. To determine the height to which the car was lifted, we need to use the equation of work done (W) which is equal to the force applied (F) multiplied by the distance moved (d). Work done here is equal to 3MJ, force applied is equal to the mass of the car (10,000 kg) multiplied by the gravitational acceleration (10m/s2). Therefore, the equation to determine the distance moved (d) is:

W = Fd

3MJ = (10,000kg)(10m/s2)d

d = 3MJ/(10,000kg)(10m/s2)

d = 3,000m

This means that the car was lifted to a height of 3,000m. It is important to note that this is an approximate value as the actual height could be slightly different due to various factors such as air resistance and the efficiency of the crane.

To understand how this calculation was made, it is important to understand the concept of work. Work is defined as the product of force and the distance moved in the direction of the force. In this case, the force is the gravitational force acting on the car which is equal to the mass of the car multiplied by the gravitational acceleration (10m/s2). The distance moved is in the direction of the gravitational force which is upwards.

The next step is to calculate the work done by the crane in lifting the car. Work done is equal to the force applied multiplied by the distance moved. Here, the force applied is the mass of the car (10,000 kg) multiplied by gravitational acceleration (10m/s2) and the distance moved is the height to which the car was lifted. From the equation of work done, we can calculate the distance moved (d) which is equal to the work done (3MJ) divided by the force applied (10,000kg)(10m/s2). This gives us a value of 3,000m for the distance moved, which is the height to which the car was lifted.

In conclusion, the amount of work done by a crane in lifting a 10,000 kg car is estimated to be 3MJ. This means that the car was lifted to a height of 3,000m. It is important to note that this is an approximate value as the actual height could be slightly different due to various factors such as air resistance and the efficiency of the crane.

The height of the car is lifted is 3,000m.

Work done by a force is defined as the product of the displacement and the component of the applied force on the object in the direction of displacement. When we push a block with some force, the body moves with some acceleration, work is done.

Work done can be calculated with this equation:

Work = Force x Distance.

The SI unit for work is the Newton meter (N m).

The amount of work done by a crane in lifting a 10,000 kg car is estimated to be 3MJ. To determine the height to which the car was raised, we need to use the equation for work done (W), which is equal to the force applied (F) multiplied by the distance moved (d). Here the work done is equal to 3MJ, the force applied is equal to the mass of the car (10,000 kg) multiplied by the acceleration due to gravity is [tex]10m/s^2[/tex]

W = Fd

3MJ = (10,000)(10)d

d = 3/(10,000)(10)

d = 3,000m

Thus, the height of the car is lifted is 3,000m.

Learn more about Work done, here:

https://brainly.com/question/13662169

#SPJ2

The formula F t = p expresses the relationship between a force and the time at which it acts to alter the momentum of an object, where F is the force acting, t is the time at which the force acts, and p is the change in momentum.

Force (F) equals the change in momentum (P) divided by the change in time (t). Furthermore, the change in momentum (P) is equal to the impulse (J). Momentum and impulse are measured in the same units (kg*m/s or N*s).

According to Newton's second law, if a constant force operates on a particle for a particular period, the product of force and time interval (the impulse) equals the change.

learn more about force and momentum

https://brainly.com/question/30131007

#SPJ4

The magnitude and direction of the electric field at (0, 8 cm) is 7 µC downwards and towards the positive charge.

The electric field at (8 cm, 0) can be calculated using Coulomb’s law. This law states that the electric field is equal to the charge multiplied by the inverse of the square of the distance between the two charges.

This gives us a magnitude of E = (3 µC + 4 µC) / (8 cm)^2 = (7 µC) / (64 cm^2).

The direction of the electric field is from the negative charge to the positive charge.

The electric field at (0, 8 cm) can be calculated by using the same equation as for the electric field at (8 cm, 0). This gives us a magnitude of E = (3 µC + 4 µC) / (8 cm)^2 = (7 µC) / (64 cm^2).

However, the direction of the electric field at this point is different. At (0, 8 cm) the electric field has a vertical component and a horizontal component. The vertical component is downward, as this point is closer to the negative charge, and the horizontal component is towards the positive charge.

The magnitude and direction of the electric field at (0, 8 cm) is 7 µC downwards and towards the positive charge.

To learn more about electric field , click here:

https://brainly.com/question/15800304

#SPJ4

Problems involving rate of change may be solved using the formula R = D/T, which states that the rate of change equals the distance travelled divided by the time it takes to go.

Determine the difference (decrease) between the two numbers being compared before computing the percentage drop. As a result of the modification, the percentage change is indicated.

The rate of change is a ratio that compares changes in the y variable to changes in the x variable. The slope of the line equals the rate of change if the rate of change is constant and linear. The slope of a line can be positive, negative, or zero.

learn more about   rate of change

https://brainly.com/question/1558547

#SPJ4

Answer:

Magnetic field.

Explanation:

Magnetic field is a region around a Magnet where a Magnetic force is excerted

A high-pressure system at the surface is created with sinking air.

High-pressure weather systems are also referred to as anticyclones that have higher atmospheric pressure at their center than the areas around them, resulting in cold air to be sinking. As the cold air sinks, it warms. It means that air can hold more water, so as a result no clouds or rain are formed.

So high-pressure weather system is associated with sinking air; on the other hand, a low-pressure weather system is associated with rising air.

You can learn more about high-pressure weather system at

https://brainly.com/question/25950727

#SPJ4

Answer: atmosphesracicallycongenial      thats the answer write that to your paper

Explanation:output is an intelligent honor to know the science subjecsts and many more than the circuit

Answer: 3m

Explanation: if this is the educake question with 5m,3m,5m you should get 3m for your answer because Displacement is the shortest distance between start and finish locations.

Answer :Total pressure = 7293.2 torr or 9.60 atm

What is volume ?

-- Volume is a measure of three-dimensional space.

--  It is often quantified numerically using SI derived units or by various imperial or US customary units.

-- The definition of length is interrelated with volume.

Total pressure = partial pressure of nitrogen + partial pressure of oxygen

The partial pressure due to nitrogen is determined using the equation of Gay-Lussac's law: P₁/T₁=P₂/T₂

P₁ = 760 torr = 1atm, T₁ = 28∘C = (273+28)K = 301k, P₂ = ?, T₂ = 310∘C =(310+273)K = 583K

P₂ = P₁ T₂/ T₁

P₂ = 760 * 583 / 301 = 1472.03 torr

The pressure due to Oxygen gas produced is calculated thus:

Balanced equation of the decomposition of Ag₂O at s.t.p. is as follows;

2Ag₂O ----> 4Ag + O₂(g)

2 moles of Ag₂O produces 1 mole of O₂

molar mass of Ag₂O = (2*108 + 16)g = 232g/mol

molar volume of gas at s.t.p. = 22.4L

2*232g i.e. 464g of Ag₂O produces 22.4L of O₂

5.57g of Ag₂O will produce 5.57g*22.4L/464g = 0.269L or 269mL of O₂

Using the General gas equation  P₁V₁/T₁=P₂V₂/T₂

P₁ = 1atm = 760 torr, V₁ = 269mL, T₁=273K, P₂ = ?, V₂= 75mL, T₂ = 583K

P₂ = P₁V₁T₂/V₂T₁

P₂ = 760*269*583 / 75*273

P₂ = 5821.17 torr

Total pressure = (1472.03 + 5821.17) torr.

Learn more about partial pressure form https://brainly.com/question/14282471

#SPJ4

Heat received by cold water equals heat lost by hot water. 60°C is the ultimate temperature.

An evaluation of an object or substance's warmth or coolness in relation to a reference value.

a measurement of how much heat is required to raise the temperature of a material by one degree Celsius for every gramme.

The unit of measurement for specific heat is Joules per gramme per degree Celsius (J/g °C).

Let c represent the water's specific heat.

based on the calorimetry concept.

Heat received by cold water equals heat lost by hot water.

200 * c * (80 - T) = 100 * c * (T - 20) (T - 20)

∴ 200c (80-T) = 100c(T-20) (T-20)

∴2 (80-T) = T - 20

∴160-2T=T-20

∴ 160+20 = T +2T

∴180 = 3T

∴T = 60 C.

To learn more about temperature refer to:

https://brainly.com/question/12180540

#SPJ1