The box is being subjected to a net external force that is; 95.21 degrees counterclockwise from the positive x-axis is the direction.
Dimensions: R = 333.36 N
95.21 degrees counterclockwise from the positive x-axis is the direction.
Ours is given; Rightward force; F r = 85N
Leftward force; F l = -115 N (It is negative because on x and y coordinates, left of x-axis denotes approaching negative section)
Upward force; F up = 565 N
Downward force; F dwn = -236 ( (It is negative because on x and y coordinates, down of y-axis denotes approaching negative section)
Let's now calculate the net force acting in the horizontal direction.
ΣF x = 85 - 115ΣF x = -30 N
Similar to the horizontal direction, there are;
ΣF y = 565 - 236
ΣF y = 329 N
θ = -84.79° + 180°
θ = 95.21°
Learn more about external here-
https://brainly.com/question/1232655
#SPJ4
Every optimal search strategy is necessarily completeQuestion 1 options:TrueFalse
False Because BFS is complete and optimal, whereas dfs is not when there are loops.
A loops is a set of instructions that are repeatedly carried out until a particular condition is met in computer programming. Typically, a certain action is taken, such as receiving and modifying a piece of data, and then a condition is checked, such as whether a counter has reached a specific value. The next instruction in the series is a directive to go back to the first instruction in the sequence and repeat it if it hasn't. The following instruction "falls through" to the following sequential instruction or branches outside of the loop if the condition has been met. A loop is a fundamental concept in programming that is frequently utilized while creating programs.
Learn more about loops here:
https://brainly.com/question/15697267
#SPJ4
Mrs. Brooke owns a robot with an FSM brain. The robot walks from left to right along a paper type containing a sequence of 1’s and 0’s. On each clock cycle, the robot walks to the next bit. An indicator on the robot’s body will light up when the last four bits that it has walked over are, from left to right, 1101. Design the FSM to compute when the robot should indicate a light. The input A is the bit underneath the robot’s legs. The output Y is TRUE when the indicator lights up. a. Sketch a timing diagram for each machine showing the input, states and output as your robot walks along the sequence 111011010. b. Compare Moore and Mealy state machine designs. c. Simulate your design in Multisim using T flip-flop
Two checkboxes: one for the CLOCK signal and one for the Set and Reset signals, can be used to configure any of the flip-flops mentioned above.
How do you draw a timing diagram?(a)In a timing diagram, time moves down the x-axis from left to right, while the y-axis represents the system's many components and their interactions. Timing charts display the duration of each process phase. Make use of them to determine which phases in a process take too long and to look for possibilities for development.
(b)The output of Mealy and Moore machines depends on the input and current state, which is their key distinction from one another. The Moore machine's current output is solely dictated by that condition.
(c)This component can be customized with adjustable CLOCK edge triggering (POSITIVE and NEGATIVE), adjustable level triggering (active LOW or HIGH) for Set and Reset inputs, and adjustable output complementarity.
To learn more about robot walks refer to :
https://brainly.com/question/30090393
#SPJ1
An engineer at Pied Piper has suggested that the current version of software that is being used cannot grow any further without being moved to a cloud environment. In order to expand, it will be necessary to adopt a methodology and set of tools that will allow for more efficient processes and deployments of the environments in which the software will run. Which of the following should Pied Piper start implementing
Pied Piper start implementing should be DevOps. The Pied Piper of Hamelin is the main figure in a myth that originated in the German town of Hamelin in Lower Saxony.
The Pied Piper narrative from the 13th century, according to which after being refused payment for his services, the Pied Piper abducted 130 children and vanished with them in the mountains, has a historical basis. The Pied Piper is said to have led the rats out of the town of Hamelin. The story goes that a piper came to a town with a rat problem and offered to get rid of the rats for a fee. Nevertheless, the villagers refused to tip the piper when he was successful in driving the rats away. 130 local children were kidnapped and never found again as retaliation by the piper, who also enticed them. The Pied Piper, also known by his German name Rattenfänger von Hameln, is the myth's central villain. Although he appears to be a hero at first, The Pied Piper is actually a fictitious representation of a very real incident in medieval Hamelin in which numerous children perished from the plague or other causes.
Learn more about Pied Piper here
https://brainly.com/question/23025357
#SPJ4
the maximum nominal voltage permitted for a luminaire installed in a motel room is ? .
Thermal insulation may be provided in close contact with Type C components.
Thermal insulation is the answer. Insulation is the process of building a barrier between two objects to prevent heat transfer from one to the other by either reflecting thermal radiation or by limiting thermal conduction and convection. Wool, fiberglass, rock wool, polystyrene, polyurethane, goose feathers, and per lite are typical thermal insulators. These thermal insulation materials are true thermal insulators since they are very poor heat conductors. Insulation made of fiberglass. The most widely utilized insulation in recent times is fiberglass. Fiberglass is able to reduce heat transfer because of how it is created, which involves effectively weaving fine strands of glass into an insulation material.
Learn more about Thermal insulation here:
https://brainly.com/question/28489776
#SPJ4
a low-pass filter has a cutoff frequency of 32 mhz. what is the fastest rise time that a rectangular wave that will pass through the filter can have?
The cutoff frequency of a low-pass filter is 32 MHz. The quickest rising time a rectangular wave may have and still pass through to the filter is 15 ns.
What is the purpose of a low-pass filter?Low-pass filters can be found in audio amplifiers, integrators, and speakers and are utilized for things like pro government, reconstruction, and speech processing. Bandpass, band-stop, and notched filters can all be created by combining low-pass and high-pass filters.
What is the low-pass filter used for?Another low-pass filter (LPF) seems to be a network that attenuates all signals above its cutoff frequency and only allows signals below it to pass. It is the opposite of an increased filter, which diminishes all sounds below its cutoff frequency while only allowing those below it to pass.
bandwidth distortion,
tr = 0.35/BW
= 0.35/(32×10⁶ )
=15 ns
To know more about low-pass filter visit:
https://brainly.com/question/30048853
#SPJ4
the maximum nominal voltage permitted for a luminaire installed in a motel room is ? .
The maximum nominal voltage permitted for a luminaire installed in a motel room is 120 volts.
What is nominal voltage?Nominal voltage is a value given to a circuit or system to conveniently identify its voltage class (for example, 120/240 volts, 300 volts, or 480Y/277 volts). Within a range that allows for the efficient operation of machinery, the actual voltage at which a circuit operates can differ from the nominal voltage.
Nominal simply means to be named. It is not the exact operating or rated voltage. For example, a 240-volt circuit may operate at 235.4 volts instead of exactly 240.0000 volts.
A nominal quantity is typically the quantity by which an item has been named or is generally referred to (for example, length, diameter, or voltage). When describing batteries, modules, or electrical systems, nominal voltage is used as a voltage reference.
Learn more about voltage
https://brainly.com/question/29445057
#SPJ4
A "wet" combustion test kit measures which two substances?A. Soot and carbon monoxideB. Carbon dioxide and oxygenC. Carbon monoxide and oxygenD. Carbon monoxide and carbon dioxide
The correct response is B. Carbon dioxide and oxygen. A "wet" combustion test kit measures Carbon dioxide and oxygen.
One carbon atom is covalently doubly linked to two oxygen atoms in every carbon dioxide molecule, giving it the chemical formula CO2. At room temperature, it exists in the gaseous state. Carbon dioxide functions as a greenhouse gas in the atmosphere by being transparent to visible light while absorbing infrared radiation. As of May 2022, it was a trace gas in the Earth's atmosphere, up from pre-industrial levels of 280 parts per million (ppm), or roughly 0.04% by volume. These elevated CO2 concentrations and climate change are mostly brought about by the burning of fossil fuels. Groundwater, lakes, ice caps, and ocean all contain carbon dioxide because it is soluble in water. Ocean acidification is brought on by the formation of carbonate, primarily bicarbonate (HCO 3), when carbon dioxide dissolves in water.
Learn more about Carbon dioxide here
https://brainly.com/question/22963529
#SPJ4
what is the occupant load of baseball stadium of 5,550 seats with 2,0000 square feet of standing space?
occupant load of a baseball stadium with 5,550 seats and 2,000 square feet of space. Since 4 is less than 5, the rounding number remains the same. Move 3: 38,496 = 38,000
What is a stadium, exactly?stadium: an enclosure having a wide area for sporting events and other demonstrations with lots of spectator seating. The term is derived from the stade, a Greek unit of length used to describe the length of the first Greek footraces.
Calculation
We get 38,000 when rounded to the nearest thousand.
Step-by-step explanation:
Consider the provided number 38,496 .
Here, we need to round off to the nearest thousand.
The rule of rounding a number is:
If 0, 1, 2, 3, or 4 follow the number, then no need to change the rounding digit.
If 5, 6, 7, 8, or 9 follow the number, then rounding digit rounds up by one number.
Round the number by using following steps:
Step 1: Identify the thousand place and underline it.
38,496
Step 2: Find the right digit to the thousand place. i.e 4
Here 4 is less than 5 so no need to change the rounding digit.
Step 3: 38,496 = 38,000
To know more about stadium visit:
https://brainly.com/question/11120377
#SPJ4
shower installed on a concrete slab what drain to use when using red guard waterproofing as the pan ?
Alternative D all the above states that when the condenser is fitted, an additional drain pan under unit is advised.
What is an example of an auxiliary?Auxiliary verbs, often referred to as helper words or aiding verbs, are auxiliary verbs that help the primary verb in a phrase to convey difficult grammatical ideas, such as modalities or time-aspects. For instance, the auxiliary verb have helps the main word finish in the sentence, "I have finished the report."
What kinds of auxiliary are there?Primary auxiliary verbs and modal auxiliary verbs are the two categories of auxiliary verbs used in English. There are three main auxiliary verbs: "be," "have," and "do." There are eight often used modal auxiliary verbs: "can," "could," "will," "would," "shall," "should," "may," "might," "must," and
To know more about auxiliary visit:
https://brainly.com/question/28362902
#SPJ4
A type of heating and air conditioning system that relies only on heated or cooled water to adjust the air temperature is known as a
A. feedback
B. hydraulically controlled
C.hydronic
D. wet
system.
A type of heating and air conditioning system that relies only on heated or cooled water to adjust the air temperature is known as a hydronic. The correct option is C.
What is an air conditioning system?The process of creating and maintaining specific temperatures, relative humidity, and air purity conditions in indoor environments is known as air conditioning. This procedure is commonly used to maintain a level of personal comfort.
A hydronic HVAC system transfers energy throughout the structure by using water as the principal fluid.
Therefore, the correct option is C. hydronic.
To learn more about air conditioning systems, refer to the link:
https://brainly.com/question/29696620
#SPJ1
A glulam beam with a manufactured depth of 12 in. at 14% moisture content. assuming common values for estimating dimensional changes, compute the new depth(in inches) of the beam if the moisture content is increased to 35%. assume a 30% fsp and 1% swelling of the green dimensions per 5% in crease in moisture content.
The correct answer is the glulam beam has a manufactured depth of 12 in. at 17% moisture.
The produced depth of the glulam at a moisture content of 14% The dried treated wood blocks had a 12% moisture content. The 4-ply glulam beams were subsequently produced. a 32% moisture content glulam beam with a produced depth of 250 mm. In the radia, the wood contracts or expands by 1% (compared to the green dimensions). If the moisture content is raised to 35, calculate the new depth of the beam using standard assumptions for calculating dimensional changes.
To learn more about moisture click the link below:
brainly.com/question/2005496
#SPJ4
Complete Question is: A glulam beam has a manufactured depth of 12 in, at 14% moisture content. The FSP is 30%. Assuming common values for estimating dimensional changes, compute the new depth of the beam if the moisture content is increased to 35%. A wood specimen was prepared with actual dimensions of 1 in.
under the right conditions, it is possible, due to surface tension, to have metal objects float on water. consider placing a short length of a small diameter steel (sp. wt. 510 1b/ft) rod on a surface of water. what is the maximum diameter, dmax, that the rod can have before it will sink? assume that the surface tension forces act vertically upward. note: a standard paper clip has a diameter of 0.036 in. partially unfold a paper clip and see if you can get it to float on water. do the results of this experiment support your analysis?
The results of this experiment is d=0.0613ln. The surface tension forces act as vertically upward.
Because water molecules are cohesive, surface tension can be described as the quality of a liquid's surface that permits it to resist an external force. Cohesive interactions between the molecules of the liquid cause the surface tension to form. The molecules have surrounding molecules on each side in the centre of the liquid. Because molecules are pulling on one another equally in all directions, there is no net force.
Write the expression for the steel rod's volume.
[tex]V=(\frac{pi}{4}d^{2})l[/tex]
In this case, d and l stand for the steel rod's diameter and length, respectively.
Create the surface tension force's manifestation.
T=σl
Here, σ represents the surface tension.
The steel rod's weight expression must be actually written.
W=γV=γ[tex](\frac{pi}{4}d^{2})l[/tex]
Two different forces will work on the steel rod to make it float in the water. One is the upward surface tension force acting on the rod from both sides, and the other is the downward weight force.
To find the expression for the diameter, apply the condition for the balance of forces along the vertical direction and insert the necessary expressions.
∑[tex]F_{V}[/tex]=0T+T−W=02T=W2σl=γ[tex](\frac{pi}{4}d^{2})ld=\frac{8sigma}{piγ}[/tex]
Take into account that the water is 600°F in temperature.
σ[tex]=5.03*10^{-3}[/tex] lb/ft
Identify the water's surface tension at [tex]600[/tex] degrees Fahrenheit.
To find the value of the steel rod's maximum diameter, substitute all the necessary values into the expression for the diameter.
[tex]d=0.0613[/tex]in.
The typical paper clip will float in the water since its diameter is smaller than the steel rod's maximum diameter. As a result, the analysis is supported by the experiment's findings.
Learn more about surface tension here
https://brainly.com/question/14530972
#SPJ4
A temporary work platform will be used on a construction project to support personnel, materials, and equipment. The figures on the next page shows the design of the platform. The platform loading and design are as follows: g
A temporary work platform is a structure used to provide a safe, stable surface for personnel, materials, and equipment on a construction project.
The design of the platform should be able to support the specified load and meet any applicable construction codes and regulations. The platform shown in the figures has a length of 10 feet, a width of 6 feet, and a height of 6 feet. The platform is designed to support a live load of 400 pounds per square foot and a concentrated load of 1,500 pounds.
The platform should also be able to support any dynamic loading, such as vibration or shock loads, that may occur due to the use of machinery or other activities on the platform. The platform should also be designed to meet any wind or seismic loads that may be applicable to the project site. To ensure the safety of personnel, materials, and equipment on the platform, it is important to follow good engineering practices when designing the platform.
Learn more about temporary work platform:
https://brainly.com/question/2966642
#SPJ4
if a 120v feeder for nonmotor loads feeds a continuous load rated at 20a and a noncontinuous load at 30a, what size overcurrent protective device should be selected
The correct response is that a 60A size overload protection device should be chosen based on the facts provided in the question.
A feeder wire is what?Power delivery from site A to point B within a facility is accomplished using feeder cables. Perfect for supplying electricity to specialized equipment or supplying backup energy service during construction. Typically, main feeder cables link large switchboards and electrical distribution transformers.
What serves as a feeder?Feeders operate machinery inside a plant, "feed" or loading raw materials for the finished product. Usually, they are also in charge of offloading the final goods. They maintain, clean, and test machines for damage.
To know more about feeder visit:
https://brainly.com/question/28445893
#SPJ4
A cooling and heating system uses two ducts, one that carries hot air and one that carries cold air. The airflows from the ducts meet in a mixing chamber. The device that actually sets the amount of air leaving each duct is the
A damper motor
B. mixing contactor.
C. fan-coll valve.
D. unit ventilator
The main purposes of a Heating, Ventilation and Air-Conditioning (HVAC) system are to help maintain good indoor air quality (IAQ) through adequate ventilation with filtration and provide thermal comfort.
What is Heating, Ventilation and Air-Conditioning Systems?The main purposes of a Heating, Ventilation and Air-Conditioning (HVAC) system are to help maintain good indoor air quality (IAQ) through adequate ventilation with filtration and provide thermal comfort. HVAC systems are among the largest energy consumers in schools. The choice and design of the HVAC system can also affect many other high performance goals, including water consumption (water cooled air conditioning equipment) and acoustics.The national consensus standard for outside air ventilation is ASHRAE Standard 62.1-2010, Ventilation for Acceptable Indoor Air Quality and its published Addenda. This standard is often incorporated into state and local building codes and specifies the amounts of outside air that must be provided by natural or mechanical ventilation systems to various areas of the school, including classrooms, gymnasiums, kitchens and other special use areas.To learn more about heating and ventilation system refers to;
https://brainly.com/question/18558949
#SPJ1
You want to implement 802.1x authentication on your wireless network. Which of the following will be required
You want to implement 802.1x authentication on your wireless network, then you will RADIUS.
What is RADIUS?A network protocol called Remote Authentication Dial-In User Service (RADIUS) offers centralised authentication, authorization, and accounting (AAA) management for users who connect to and use a network service. Livingston Enterprises created RADIUS in 1991 as an access server authentication and accounting protocol. Later, it was incorporated into the IEEE 802 and IETF standards.
RADIUS is a client/server protocol that operates in the application layer and supports either TCP or UDP. Network access servers, which manage network access, typically include a RADIUS client component that communicates with the RADIUS server. The back-end of choice for 802.1X authentication is frequently RADIUS. On UNIX or Windows, a RADIUS server typically runs in the background.
Learn more about RADIUS
https://brainly.com/question/28529631
#SPJ4
Given a string and a non-empty substring sub, compute recursively if at least n copies of sub appear in the string somewhere, possibly with overlapping. N will be non-negative.
From left to right, the string is scanned for the specified substring; all non-overlapping repetitions of the bit string are detected; and a list of results is returned. The length is returned using the len function.
How is a substring done?The substring starts with the character located at the supplied index and continues up to endIndex - 1 if the argument is provided. Grammar: public String within string (int begIndex, int endIndex) Parameters: beginIndex: the inclusive beginning index. endIndex: The exclusive end index.
What distinguishes a string from a substring?A segment is a section of a string where the letters must be taken from adjacent locations. For instance, the phrase CATCGA,
To know more about substring visit:
https://brainly.com/question/17011544
#SPJ4
floor mounted equipment must have legs that are at least how tall
For indoor moist settings where walls are routinely washed, an exposed wire system must be mounted.
For indoor wet situations with frequently cleaned walls, exposed wire systems must be installed with at least a 6 mm (1/4 in.) air gap between the mounting surface and the electrical equipment. This is done to stop water from getting inside the electrical components and shocking users. Since the air gap acts as a barrier between the electrical equipment and the wet walls, it helps prevent shocks. A cabling system is what? Is a group of cables and related hardware that is used to physically connect two or more systems. Additionally, it is used to transmit data between computers and other networked devices like modems and printers. Among the cabling systems is Wireless Copper Fiber Optic.
Learn more about Cabling system here:
https://brainly.com/question/29733198
#SPJ4
the primary difference between integrated/concurrent engineering development and functional/sequential development is:
Integrated development invests more money upfront to make savings later on. Sequential development covers the stages of development more thoroughly.
An integrated development environment (IDE) is a piece of software that offers computer programmers a full range of tools for creating software. A build automation tools and a source code editor are typically included in an IDE. SharpDevelop is an example of IDEs that lacks the requisite compiler, interpreter, or both. Other IDEs, such as NetBeans and Eclipse, do.
A version control system or numerous tools to make the creation of a graphical user interface (GUI) simpler may be included, blurring the line between an IDE and other components of the larger development environment. For usage in object-oriented software development, a class browser, an object browser, and a class hierarchy diagram are also common features of contemporary IDEs.
Learn more about integrated development here:
https://brainly.com/question/9671083
#SPJ4
if the turn ratio of a step-down transformer is 15:1 and the series impedance (referred to the primary) of j50 ohm. if the no-load primary voltage is 345 kv (line-to-line), and the secondary side is serving a y-connected balance load of 0.667 j0.111 ohms, the real power absorbed by the load (per phase) would be :
if the turn ratio of a step-down transformer is 15:1 and the series impedance C= 3.157 ×10^-3 < -36.87° Ω~¹ D= Is/Ir Since Is=Ir
How do resistance and impedance differ?Voltage split by permeability in a resistor equals resistance. Voltage multiplied by current for just about any component is referred to as impedance. Instead of being referred to as impedance in the context of a resistor, the voltage to current ratio is called resistance.
Calculation
Frequency f=60Hz
Line impedance Z= 12.84 + j72.76 Ω
Then,
The resistance is R=12.84Ω
And reactance is X=72.76Ω
Z=√(12.84²+72.76²)
Z=73.88
Angle = arctan(X/R)
Angle = arctan(72.76/12.84)
Angle=80°
Then, Z=73.88 < 80° ohms
Load voltage is 132 kV
Load power P=55 MWA
Power factor =0.8lagging
the relation between the sending and receiving end specifications are given using ABCD parameters by the equations below.
Vs = AVr + BIr
Is = CVr + DIr
Where
Vs is sending Voltage
Vr is receiving Voltage
Is is sending current
Ir is receiving current
A is ratio of source voltage to received voltage A=Vs/Vr when Ir=0
B is short circuit resistance
B= Vs/Ir when Vr=0
C is ratio of source current to received voltage C=Is/Vr when Ir=0
D is ratio of source current to received current D=Is/Ir when Vr=0
Now,
The load at 55MVA at 132kV (line to line)
Therefore, load current is
Ir= P/V√3
Ir=55×10^6/(132×10^3×√3)
Ir=240.56 Amps
It has a power factor 0.8 lagging
PF=Cosθ
0.8=Cosθ
θ=arcCos(0.8)
θ=36.87°
Therefore, Ir=240.56 <-36.87°
Vr=V/√3
Vr=132/√3
Vr=76.21 kV. Phase voltage
Vr= 76210 < 0° V
For series impedance,
Using short line approximation
Vs = Vr + IrZ
Vs = 76210 < 0° + (240.56 <-36.87° × 73.88 < 80°)
Using calculator
Vs=76210<0° + 17772.5728<(-36.87°+80°)
Vs=76210<0° + 17772.5728<43.13°
Vs=89970.67<7.7°
Also
Is = Ir = 240.56 <-36.87° Amps
Therefore, the ABCD parameters is
A=Vs/Vr
A= 89970.67 <7.7° / 76210 <0°
A=1.181 <7.7-0
A=1.18 <7.7° no unit
B = Vs/Ir
B = 89970.67 < 7.7° / 240.56 <-36.87°
B = 347.01 < 7.7+36.87
B= 347.01 < 44.57° Ω
C= Is/Vr = 240.56 <-36.87° / 76210 < 0°
C= 0.003157 <-36.87-0
C= 3.157 ×10^-3 < -36.87° /Ω
C= 3.157 ×10^-3 < -36.87° Ω~¹
D= Is/Ir
Since Is=Ir
Then, D = 1 no unit.
To know more about impedance visit:
https://brainly.com/question/15343694
#SPJ4
rope that is used exclusively for utility rope and is susceptible to abrasion and damage because a large portion of the load-bearing strands are exposed is known as:
Laid rope is rope that is only used for utilitarian purposes and is vulnerable to wear and breakage because a significant amount of the pile strands are exposed.
What rope is the strongest?Nylon is the preferred rope due to its outstanding strength and exceptional stretching properties. Nylon, which is more durable than either of the manila and polypropylene, is frequently used to draw the largest weights and support the most weight.
What rope is the softest?Since cotton is the smoothest of all fibers, it is perfect for use when rope wear is a concern. It is perfect for a wide range of tasks thanks to its softness, especially for things like handrail décor.
To know more about rope visit:
https://brainly.com/question/28928264
#SPJ4
True or False: Data Scientists would perform a cluster analysis when they know what they are looking for and just need to confirm their assumptionsAssuming K=3, how would the point X be classified using KNN?Select one:a. Redb. Blue
Answer: a. Red
Explanation:
1. Data Scientists would perform a cluster analysis when they know what they are looking for and need to confirm their assumptions. ==> True
2. Assuming K=3, how would point X be classified using KNN? ==> Red
What accident theory divides an accident into three phases: pre-contact, contact, and post-contact?
The accident theory divides an accident into three phases: pre-contact, contact, and post-contact is the domino theory.
What is the domino theory?The domino theory is a geopolitical theory that holds that changes in democracy in one country have a domino impact on surrounding countries.
The multiple-factor theory examines not just the three domino theory phases—precontact, contact, and post-contact—but also additional elements that influence an accident, such as management, machine, media, and man.
Therefore, the domino theory separates an accident into three phases: pre-contact, contact, and post-contact.
To learn more about the domino theory, refer to the link:
https://brainly.com/question/28082356
#SPJ1
Hydraulic engineers in the United States often use, as a units of volume of water, the acre-foot, defined as the volume of water that will cover 1 acre (where 1 acre = 43560 ft2) of land to a depth of 1 ft. A severe thunderstorm dumped 2.0 in. of rain in 30 min on a town of area 45 km2. What volume of water, in acre-feet, fell on the town?
Following that, they may also be involved in the design of machinery, medical equipment, and vehicles whose structural integrity has an impact on their operation and safety.
Engineers construct the "bones and muscles that are generated the form and also that make the shape of man-made structures." It is necessary to comprehend structural engineering since it determines the stability, strength, stiffness, and earthquake-susceptibility of built structures for both buildings and non-building structures. In order to better integrate their structural designs with those of other designers, such architects and building services engineers, and to frequently oversee the on-site execution of projects by contractors. After that, they might also work on designing machines, medical devices, and cars.
Learn more about Structural integrity here:
https://brainly.com/question/11417828
#SPJ4
In the feedback pair amplifier (Darlington) of the following figure assume that there is
a resistor (parasitic) between the collector of Q1 and the base of Q2 of 10 Ohms. Find the corresponding formula for IB1 (similar to eq. 4.69). Find the base and collector currents of each transistor, and the base, emitter, and collector voltages of each transistor. Assume that both transistor have been built of silicon. Try to avoid useless approximations.
Explanation:
gkltuijhfryij etikklhggj
Where are you likely to find a cooling coil located in the ductwork?
OA. A medium-sized office
OB. A large apartment building
C. A single-family home
D. A large factory
The component of an air conditioner or heat pump that collects heat from the indoor air is called the evaporator coil.
Where is the a coil located?The evaporator coil is specifically located in the air handler of your air conditioner or, if you have a combined heating and air conditioning system, inside the furnace. Air is cooled and transferred to the evaporator coils of HVAC systems by refrigerant that has evaporated inside the coils.
The component of a heat pump or air conditioner that collects heat from the indoor air is called an evaporator coil. Either the furnace is connected to it or it is housed inside the air handler.
On the air intake side of the fan coil or the furnace's outlet side, respectively, is where the evaporator coil—also known as the cooling coil—is positioned within the house. Its role is to chill interior air so the blower fan can provide cool, refreshing air back into the space.
Therefore, the correct answer is option c) A single-family home.
To learn more about cooling coil refer to:
https://brainly.com/question/21335685
#SPJ1
(a) Write a monitor to implement a bounded stack, b_stack, which may contain at most max elements. The push and pop operations behave as follows: stack.push(x): If the stack is not completely full, the operation pushes the new element x on top of the stack. Otherwise, the operation has no effect and the value of x is discarded. stack.pop(x): If the stack is not completely empty, the operation removes the value currently on top of the stack and returns the value in the variable x. If the stack is empty, the operation waits until a value has been pushed on the stack and then completes the pop.
A monitor is implemented as a BCPL procedure, and any associated operations are declared as additional procedures inside the monitor. Prior to the procedure declarations, condition variables, initialized in the monitor body.
While smart TVs have special technology built in to improve picture quality, a smart monitor is smaller, so picture quality will still be sharp and clear. For games and watching movies, you also have a variety of viewing angles. A monitor is especially useful when there are several people involved in the adult's life or named in the Agreement. Meeting scheduling and information exchange can be facilitated by the monitor. If there is already tension or dispute between any of the persons involved, a monitor is also crucial. Monitors display data that has been processed by the computer's video card. Output is the term used to describe the processing outcome displayed on the monitor. The output gives you immediate feedback by displaying text and graphic pictures while you work or play.
A monitor to implement
monitor bounded_stack
buffer[max] // may contain at the most, max elements
full_slots = 0; // 0 < full_slots < max
condition notempty, notfull
deposit(x) {
if (full_slots == max) notfull.wait // or discard
stack.push(x)
full_slots = full_slots + 1
notempty.signal
}
remove(x) {
if (full_slots == 0) notempty.wait
stack.pop(x)
full_slots = full_slots - 1
notfull.signal
}
Learn more about monitor here
https://brainly.com/question/9086803
#SPJ4
Rank the capacitors on the basis of the charge stored on the positive plate_ Rank from largest to smallest: To rank items as equivalent; overlap them: View Available Hint(s) Reset Help largest smallest A = 4 cm? =1nF A = 2 cm? =8 nF A = 2 cm? =4 nF A = 4 cm? C = 2 nF A =1 cm? =lnF A = 8 cm? =2 nF The correct ranking cannot be determined. Submit Previous Answers
A fixed-value capacitor known as a ceramic capacitor uses ceramic material as the dielectric. It is made of two or more layers that alternate.
Ceramic capacitors are mostly employed in devices with high stability and minimal loss. The capacitance values of these capacitors are steady with regard to the applied voltage, frequency, and temperature thanks to the devices' extremely precise findings. Ceramic capacitors are non-polarized capacitors used in timing, coupling, decoupling, and filtering applications. The ceramic capacitor has a pretty high voltage rating and can withstand both DC and AC voltage. A ceramic material serves as the dielectric medium in a ceramic capacitor. A thin coating of metal oxide serves as the dielectric medium within an electrolytic capacitor. A ceramic capacitor's corresponding series resistance is little.
To learn more about ceramic capacitor click the link below:
brainly.com/question/28999660
#SPJ4
instead of having a third terminal used for electronic control signals like most transistors, phototransistors use ? as the control input.
Phototransistors use light as the control input instead of having a third terminal used for electronic control signals like most transistors.
Phototransistors are sensitive to light, allowing them to be used in applications where light needs to be detected or converted into an electronic signal. Phototransistors are typically used in motion detection, light detection, and optical communications.
Electronic control signals are digital or analog signals used to control electronic systems and devices. These signals can be used to control the operation of a wide range of electronic devices, such as computers, motors, actuators, and sensors. Electronic control signals can be generated by a variety of devices, including microcontrollers, computers, and logic circuits. The type of signal used will depend on the device that is being controlled and the type of control system it is part of. Examples of control signals include pulse width modulation (PWM), pulse frequency modulation (PFM), and digital control signals.
Learn more about electronic control signals
https://brainly.com/question/2538188
#SPJ4
What does it mean to say that guaranteed maximum-price contracts limit the exposure of owners?
Construction costs cannot exceed a specified limit, ensuring the original estimates must be more accurate.
Construction costs cannot exceed a specified limit, ensuring the original estimates must be more accurate.
Project managers are legally obligated to ensure contractors don’t overcharge, freeing owners from this burden.
Project managers are legally obligated to ensure contractors don’t overcharge, freeing owners from this burden.
Owners only have to pay fair market price for their area, which means contractors can never charge more.
Owners only have to pay fair market price for their area, which means contractors can never charge more.
Contracts are much more complicated, which means there are fewer loopholes that dishonest contractors may exploit.
Contracts are much more complicated, which means there are fewer loopholes that dishonest contractors may exploit.
The agreed-upon maximum price limits the financial exposure of the owner from unexpected or uncontrolled costs.
What does it mean to suggest that contracts with guaranteed maximum prices limit owners' exposure?Guaranteed maximum-price contracts protect owners from the financial risk associated with unforeseen cost overruns, ensuring that the total cost of the project does not exceed the predetermined amount.Guaranteed maximum-price contracts provide owners with an added layer of protection against unexpected and costly construction overruns. With such contracts in place, the contractor is obligated to ensure that the total cost of the project does not exceed a previously agreed upon maximum amount.This limits the exposure of owners, as they will not be required to pay any more than the specified amount. Furthermore, project managers are legally obligated to ensure that the contractors do not overcharge, thus freeing the owners from this burden.Additionally, the owners will only have to pay a fair market price for their area, meaning that contractors cannot charge more. Finally, the contract is much more complicated, thus reducing the possibility of dishonest contractors exploiting any loopholes.In summary, guaranteed maximum-price contracts provide a safe and secure environment for owners and limit their potential exposure to unexpected and costly overruns.To learn more about Guaranteed maximum-price refer to:
https://brainly.com/question/16913183
#SPJ1
