It is false that a ddos attack is launched against a host from a single server or workstation.
A DDoS (Distributed Denial of Service) attack is launched against a host from multiple sources, often using a network of compromised computers or devices (known as a botnet) to flood the target with a large volume of traffic or requests, overwhelming its ability to respond and causing it to become unavailable to legitimate users. A single server or workstation would not be sufficient to launch a DDoS attack on its own.
A single server or workstation would not be sufficient to launch a DDoS attack on its own because a DDoS attack requires a large volume of traffic or requests to be directed at the target, which cannot be achieved by a single device alone. It would require multiple sources to generate enough traffic or requests to overwhelm the target. This is why attackers often use a botnet, which is a network of compromised devices that can be controlled remotely to launch the attack simultaneously, making it difficult to mitigate.
To know more about ddos attack,
https://brainly.com/question/31946918
#SPJ11
Which of the following is a setting you can configure from the BIOS setup program?
a.
disable a Windows driver c.
configure the screen saver timeout
b.
set the desktop background d.
change the boot sequence
One setting that can be configured from the BIOS setup program is the boot sequence.
The BIOS (Basic Input/Output System) is a firmware program that runs when a computer is first turned on before the operating system is loaded. It is responsible for initializing hardware components, performing system checks, and configuring system settings. The BIOS setup program, also known as the CMOS setup utility, allows users to view and change various system settings.
One of the settings that can be configured from the BIOS setup program is the boot sequence. The boot sequence determines the order in which the computer searches for an operating system to load. By default, most computers are set to boot from the hard drive first, but it is possible to change the boot sequence to boot from other devices such as a CD/DVD drive, USB drive, or network server.
Other settings that can be configured from the BIOS setup program include the system date and time, password protection, hardware device settings, and power management settings. It is important to be careful when making changes to the BIOS settings, as incorrect settings can cause the computer to fail to boot or cause other issues.
Learn more about firmware here:
https://brainly.com/question/28945238
#SPJ11
a preformatted document used as a starting point in word 2016 is known as ________.
A preformatted document used as a starting point in Word 2016 is known as a template.
Using templates in Word 2016 can save time and effort, especially when creating documents that require a specific format or design. Templates can be found in the File tab under New and are organized by categories such as Resumes, Flyers, and Brochures.
A template is a file that serves as a base for creating other documents. It contains predefined formatting, layouts, and design elements that can be customized for specific purposes. Using a template can save time and ensure consistency across multiple documents.
To know more about document visit:-
https://brainly.com/question/9208229
#SPJ11
Which security mode is the least secure choice when a home wireless router is configured?
a WPA
b WPA2
c WEP
d WPA2-Personal
Wireless security protocols such as WEP, WPA, and WPA2 are used to protect wireless networks from unauthorized access. WEP (Wired Equivalent Privacy) was the first security protocol for wireless networks, but it is considered the least secure option because it uses a static encryption key that is easy to crack with modern tools. WPA (Wi-Fi Protected Access) and WPA2 (Wi-Fi Protected Access II) are more secure options that use dynamic encryption keys that change frequently, making it much more difficult for attackers to gain access to the network. WPA2 is the most secure option available, as it uses the strongest encryption algorithms and provides protection against various types of attacks. However, it is important to note that the security of a wireless network depends not only on the security protocol but also on other factors such as strong passwords, disabling WPS, and keeping the router firmware up to date.
on a brand, {{agent.name}} works like...
On a brand, {{agent.name}} works like a representative who promotes and advocates the brand's products or services.
They are responsible for establishing and maintaining a positive image for the brand and ensuring customer satisfaction. The agent acts as a liaison between the brand and the customers, providing information, addressing concerns and complaints, and helping to resolve issues. They are also responsible for maintaining a good relationship with retailers and other business partners who sell the brand's products. The agent's primary objective is to increase brand awareness, drive sales and revenue, and build a loyal customer base. By leveraging their knowledge of the brand and their expertise in marketing and sales, {{agent.name}} can help to build a strong brand identity and a competitive edge in the market. In conclusion, the role of {{agent.name}} is crucial in promoting and maintaining a brand's reputation and success.
To know more about brand's products visit:
brainly.com/question/15049308
#SPJ11
Post Test: Software Development Life Cycle and Initial Phases 6 Select the correct answer. Which activity is performed during high-level design in the V-model? A. gathering user requirements B. understanding system design C. understanding component interaction D. evaluate individual components E. design acceptance test cases
During the high-level design phase in the V-model of the software development life cycle, the activity that is performed is understanding component interaction. So, the correct option is C.
The high-level design focuses on translating the system requirements into an architectural design that outlines the overall structure of the software system. It involves identifying the major components or modules of the system and understanding how they interact with each other to achieve the desired functionality.
Understanding component interaction is crucial during high-level design as it involves determining the interfaces and dependencies between the different components. This includes defining the communication protocols, data flows, and interactions between the components. The goal is to ensure that the components work together seamlessly and efficiently to meet the system requirements.
Option A, gathering user requirements, is typically performed during the requirements gathering phase, which is before the high-level design phase. It involves understanding and documenting the needs and expectations of the system's users.Option B, understanding system design, usually takes place in the detailed design phase, where the specific design of the system is defined, including the internal workings of the components.Option D, evaluating individual components, is more aligned with the testing phase, where the components are assessed individually to ensure their functionality and compliance with the design.Option E, designing acceptance test cases, typically occurs during the testing phase when the acceptance criteria are established and test cases are created to verify that the system meets the specified requirements.In conclusion, during the high-level design phase in the V-model, the activity of understanding component interaction takes place to ensure that the major components of the system work together effectively to achieve the desired functionality.
For more questions on V-model
https://brainly.com/question/16298186
#SPJ11
suppose you live in a country where coins have values , 1, 5, 20, 25. what is the number of coins chosen by the greedy algorithm for producing a given value with the minim number of coins where one repeatedly chooses the highest-value coin for the remaining partial sum, to sum up to 60?
The greedy algorithm, when applied to the given scenario where coins have values of 1, 5, 20, and 25, would choose a total of 4 coins to sum up to a value of 60.
This approach aims to minimize the number of coins used by repeatedly selecting the highest-value coin for the remaining partial sum. To understand the greedy algorithm's solution, we start by selecting the highest-value coin available, which is 25 in this case. Subtracting 25 from 60 leaves us with 35. Now, we repeat the process and choose the next highest-value coin, which is 25 again. Subtracting 25 from 35 leaves us with 10. We continue by selecting the highest-value coin, 10, and subtract it from the remaining value. This step requires choosing a 5-value coin since a 10-value coin is not available. Finally, we have a remaining value of 5, which can be covered by a single 5-value coin. Hence, the greedy algorithm selects 25, 25, 10, and 5-value coins, totaling to 60 with the minimum number of coins, which is 4 in this case.
Learn more about algorithm here: https://brainly.com/question/21364358
#SPJ11
do you always need to get the largest amount of ram possible? why or why not?
When it comes to RAM, the amount you need depends on your usage requirements. If you are a casual user who browses the web, watches videos and works on documents, you may not need a large amount of RAM. However, if you are a professional who works with large files, runs multiple applications simultaneously or engages in activities like video editing or gaming, a larger amount of RAM will be beneficial.
While more RAM allows your computer to store more data and programs, it also helps improve its performance. This is because RAM enables your computer to access data faster than it would if it had to retrieve it from the hard drive. Therefore, if you have more RAM, your computer can store more data and access it faster, leading to better performance. However, having too much RAM can also be a waste of money. It is important to have the right amount of RAM for your usage requirements.
Adding more RAM than necessary may not improve your computer's performance if your other hardware components are not up to par. Additionally, buying the latest, fastest RAM can be costly and may not provide noticeable improvements in performance. In summary, it is important to consider your usage requirements when deciding how much RAM you need. Having more RAM can improve your computer's performance, but having too much can be a waste of money. It is important to find the right balance based on your needs and budget.
Learn more about RAM here-
https://brainly.com/question/31089400
#SPJ11
which of the following shows how devices are connected and includes an ip allocation register?
A network topology diagram displays how devices are connected to each other and includes an IP allocation register, which shows the IP addresses assigned to each device in the network.
The diagram provides a visual representation of the network and helps administrators identify potential issues with connectivity and configuration. It also helps with troubleshooting and planning for network expansion. Network topology diagrams can take various forms, including bus, star, mesh, and ring topologies, depending on the network architecture. By maintaining an accurate network topology diagram, IT professionals can ensure smooth and efficient network operation.
learn more about network topology here:
https://brainly.com/question/17036446
#SPJ11
What is the last thing printed by the following program?
var start = 30;
var stop = 10;
for(var i = start; i >= stop; i-=5){
if(i % 2 == 0){
println(i * 2);
} else {
println(i);
}
}
The program will print the following values in order:
6025
5020
40
1530
10
the last thing printed by the program will be the value 10, which is the last value of "i" when the loop finishes.
the last thing printed by the following program will be the number 10, which is the value of the "stop" variable. this is because the for loop initializes a variable "i" to the value of the "start" variable, which is 30 in this case. the loop continues as long as "i" is greater than or equal to the value of the "stop" variable, which is 10 in this case. in each iteration of the loop, "i" is decremented by 5.
inside the loop, the program checks if "i" is an even number using the condition "if(i % 2 == 0)". if "i" is even, the program multiplies "i" by 2 and prints the result using "println(i * 2)". if "i" is odd, the program simply prints the value of "i" using "println(i)".
Learn more about variable here:
https://brainly.com/question/30052746
#SPJ11
what month does the new icd-10-cm codebook take effect each year?
The new ICD-10-CM codebook takes effect on October 1st of each year.
The new ICD-10-CM codebook takes effect each year on October 1st. This means that any medical claims submitted on or after October 1st must use the new codes. The ICD-10-CM is a coding system used by healthcare providers to classify and code all diagnoses, symptoms, and procedures recorded in medical records. The new codes are introduced each year to reflect changes in medical terminology, advances in medical technology, and updates in healthcare policies and regulations.
You can learn more about ICD-10-CM codebook at
https://brainly.com/question/30365384
#SPJ11
within a hootsuite analytics report, you can add a tile, which is:
A tile in a Hootsuite Analytics report is a customizable and modular data visualization component that presents specific social media metrics in an organized and easy-to-understand manner. By adding multiple tiles to your report, you can obtain a comprehensive overview of your social media performance to help you make informed decisions and optimize your strategy.
A Hootsuite Analytics report allows you to monitor and analyze your social media performance by creating a customizable and comprehensive report. Within a Hootsuite Analytics report, you can add a tile, which is an individual data visualization component or a building block of the report. These tiles help you to present specific social media metrics, making it easier for you to understand and interpret the data.
Tiles can showcase a wide range of metrics, such as post engagement, reach, clicks, and impressions, or display information in various formats like tables, graphs, and charts. By adding multiple tiles to your report, you can create a tailored and comprehensive overview of your social media activities and their impact.
To add a tile, simply select the desired metric from the available options and then choose the preferred visualization format. You can arrange tiles in a grid-like structure, making it easy to organize and understand the report. This flexibility allows you to create a report that focuses on the most relevant and valuable data for your specific needs and objectives.
Learn more about Analytics report here :-
https://brainly.com/question/10604272
#SPJ11
What restrictions do you have for app availability?
App availability can be restricted due to factors such as platform compatibility, geographic restrictions, device requirements, age ratings, and developer preferences. It is essential to be aware of these factors when searching for and downloading apps.
App availability is determined by several factors, such as:
1. Platform Compatibility: Apps are typically designed for specific platforms, like iOS, Android, or Windows. An app might not be available if your device's operating system is not compatible with the app's requirements.
2. Geographic Restrictions: Some apps are only available in certain countries or regions due to legal or licensing issues, as well as differing market demands. For instance, an app may be limited to the United States due to copyright laws, or a regional app might only be available in its respective country.
3. Device Requirements: Apps may have specific device requirements, such as minimum hardware specifications or screen resolutions. If your device does not meet these requirements, the app may not be available for download or may not function optimally.
4. Age Ratings: Apps are often rated based on their content, which can limit availability to users who fall within the appropriate age range. For example, a game with mature content may not be available to users under a certain age.
5. Developer Preferences: App developers may choose to limit their app's availability for various reasons, such as targeting a specific demographic or managing the rollout of new features.
Learn more about App availability here :-
https://brainly.com/question/29808498
#SPJ11
When you point the remote control to turn on/off the TV, the remote is using radio frequency.
a. True
b. False
True, the remote control uses radio frequency to turn on/off the TV.
The remote control uses infrared or radio frequency to communicate with the TV. Infrared is commonly used for short-range communication, such as within a room, while radio frequency is used for longer-range communication, such as through walls and ceilings. The remote control sends a signal to the TV, which has a built-in receiver that detects the signal and turns the TV on or off accordingly.
The use of radio frequency allows for greater flexibility in controlling the TV from a distance and through obstacles. However, it also poses potential security risks as it can be intercepted and used by unauthorized individuals.
Learn more about security here:
https://brainly.com/question/30192528
#SPJ11
evidence-based practice is more likely to produce quality programs than other approaches.
Evidence-based practice (EBP) is a methodology that has gained prominence in recent years due to its ability to produce quality programs.
One of the key advantages of EBP is that it relies on empirical evidence rather than anecdotal or untested approaches. This means that programs developed through EBP are more likely to be effective and produce positive outcomes. EBP also allows for continuous evaluation and improvement.
Evidence-based practice (EBP) is more likely to produce quality programs than other approaches because it relies on the systematic use of research findings, data, and expert knowledge to inform decision-making and program design. EBP ensures that programs are effective, efficient, and relevant to the target population,
To know more about programs visit:
https://brainly.com/question/30613605
#SPJ11
true or false the output of the system cannot exceed the output of the bottleneck operation(s).
The statement is true because the output of a system is limited by the capacity of its bottleneck operation(s).
The concept of a bottleneck operation is derived from the theory of constraints, which states that the throughput of a system is determined by its constraints or limitations.
The bottleneck operation(s) sets the maximum output rate for the entire system. Even if other operations within the system can work at a faster pace, the output of the system as a whole cannot exceed the capacity of the bottleneck operation(s).
The presence of a bottleneck creates a constraint that affects the overall performance and output of the system. To improve the system's output, it is necessary to focus on optimizing or alleviating the bottleneck operation(s) to increase its capacity and remove the limitation it imposes on the system's output.
Learn more about bottleneck operation https://brainly.com/question/31482825
#SPJ11
To read a quick response (QR) code using a smart phone, one must have ______ app.
a. visualizer
b. reader.
c. decoder
d. scanner
To read a QR code using a smart phone, one must have a QR code reader app installed. Your answer is option d. Scanner
A QR code is a two-dimensional barcode that can be read by a smartphone camera. To scan a QR code, you need a QR code reader app that can decode the information contained within the code. The app works by using the camera on your phone to scan the QR code. Once the code has been scanned, the app will automatically decode the information and take the appropriate action, such as opening a website or displaying a message.
QR codes are becoming increasingly popular because they can be used to provide quick access to information. For example, QR codes can be used in advertisements to provide more information about a product or service, or on business cards to provide contact information. QR codes can also be used in retail environments to provide information about products, such as price and availability.
Learn more about QR code here:
https://brainly.com/question/12851133
#SPJ11
the excel data _____ feature restricts data entry to follow a defined set of rules.
The Excel data validation feature restricts data entry to follow a defined set of rules.
With data validation, you can set up rules that limit the type of data that can be entered in a cell, such as text, numbers, dates, or values from a specific list. This helps to ensure that the data entered into your spreadsheet is accurate, consistent, and error-free.
For example, you may want to restrict the input in a cell to only allow dates between a certain range, or only accept whole numbers within a certain range. You can also create a drop-down list of options to choose from, making it easy for users to select the correct data without the risk of spelling errors or inconsistencies.
In addition to preventing data entry errors, data validation can also save time and improve efficiency by eliminating the need for manual data checks and corrections. By defining the rules for data entry up front, you can streamline your workflow and ensure that your spreadsheet remains organized and accurate. Overall, data validation is a valuable feature in Excel that can help you to maintain the integrity of your data and avoid costly mistakes.
Learn more about Excel data validation
https://brainly.com/question/32065950
#SPJ11
the target link-layer address option is used in neighbor advertisement and ____ messages.
The target link-layer address option is used in neighbor advertisement and neighbor solicitation messages.
The target link-layer address option is a type of option that can be included in neighbor advertisement and neighbor solicitation messages in IPv6 networks. This option is used to provide information about the link-layer address of the node that is the target of the message.
The target link-layer address option is a part of the Internet Control Message Protocol version 6 (ICMPv6) and is used in Neighbor Discovery Protocol (NDP) messages. NDP uses these messages to find the link-layer address (e.g., MAC address) of a neighboring node on the same network.
To know more about neighbor visit:-
https://brainly.com/question/29989486
#SPJ11
am the generation of firewall that is able to detect and alert users about suspicious activity as soon as it happens. i am powerful enough to be used by large corporations. what type of firewall am i?
You are mostl likely an Intrusion Detection System (IDS) firewall.
What type of firewall detect and alert suspicious activity?As an Intrusion Detection System (IDS) firewall, you possess the capability to detect and promptly alert users about suspicious activity as it occurs. This makes you a valuable tool for large corporations that require robust security measures.
The advanced capabilities enable you to monitor network traffic, analyze it for potential threats and generate alerts or notifications to notify administrators of any suspicious or malicious activities. This proactive approach allows organizations to respond quickly and effectively to potential security breaches, enhancing their overall cybersecurity posture.
Read more about firewall
brainly.com/question/13693641
#SPJ4
you are connecting a switch to a router. you just made a cable with each end configured differently, one 568a and the other 568b. when you plug in the cable, the devices cannot communicate. what is the most likely cause?
The most likely cause for the devices not being able to communicate when connecting a switch to a router with a cable that has one end configured as 568A and the other end configured as 568B is a mismatch in wiring standards.
What are the 568A and the 568B wiring?The 568A and 568B are two different wiring standards used for Ethernet cables. In order for devices to communicate properly, both ends of the cable need to follow the same wiring standard.
Considering the given situation, maintaining uniformity in the wiring standard used on both ends of the cable would be the best course of action. Either utilize a pre-made cable with consistent wiring standards with either 568A or 568B on both ends or re-terminate one end of the cable to match the same standard as the other end.
Learn more about Ethernet cables at: https://brainly.com/question/30360112
#SPJ14
access control is achieved by means of a combination of policies, programs, and technologies.
True or False
True. Access control is achieved through a combination of policies, programs, and technologies that are designed to regulate and manage access to resources such as computer systems, networks, and data.
Policies define the rules and guidelines for accessing resources, programs implement those policies, and technologies provide the tools and mechanisms to enforce access control and ensure the security of the system. Examples of access control technologies include firewalls, intrusion detection systems, encryption, authentication mechanisms such as usernames and passwords, biometric systems, and more.
Learn more about encryption here:
https://brainly.com/question/28283722
#SPJ11
true or false the semantic web uses metadata with text data to make it more easily processed by computers.
True. The semantic web uses metadata with text data to make it more easily processed by computers. Semantic metadata provides additional context and meaning to the data, allowing machines to understand and interpret it more accurately. This facilitates efficient search, retrieval, and analysis of information.
Metadata is data that describes other data and provides information about its content, context, and structure. The Semantic Web uses metadata to provide additional context and meaning to text data, making it easier for computers to understand and process the information.
This is achieved through the use of semantic markup languages, such as Resource Description Framework (RDF), which allows data to be expressed in a machine-readable format that can be easily processed and linked by computers. This allows for more efficient and accurate searching, indexing, and retrieval of web content, and enables the development of more sophisticated applications and services that can leverage the power of the Semantic Web.
Learn more about Metadata at:
https://brainly.com/question/14960489
#SPJ11
write a statement that assigns operationresult with the division of number1 by number2. ex: if number1 is 6 and number2 is 2, operationresult is 3.
In order to assign operationresult with the division of number1 by number2, we have to divide number1 by number2 using the division operator "/" in the statement.
For example, if number1 is 6 and number2 is 2, the statement to assign operationresult would be:
operationresult = number1 / number2
This will store the result of the division, which in this case is 3, in the variable operationresult.
In summary, to assign operationresult with the division of number1 by number2, we need to use the division operator "/" in our statement to perform the mathematical calculation. This will result in a quotient that will be stored in the variable operationresult. This value can then be used in subsequent calculations or operations. The division process involves dividing a number by another number, which results in the quotient or answer to the math problem. This method is commonly used in calculations, mathematical equations, and statistical analysis. It is a fundamental operation that is used in various fields of study such as physics, engineering, and economics to name a few.
To learn more about economics click brainly.com/question/14355320
#SPJ11
Write code that creates an array of integers named data of size 5 with the following contents:
[27, 51, 33, -1, 101]
To create an array of integers with the given contents, we can declare and initialize the array in a single line of code. We use the curly braces to enclose the values and separate them with commas.
The size of the array of integers is determined by the number of values in the curly braces, which in this case is 5. We assign this array to a variable named data of type int[]. ```java int[] data = {27, 51, 33, -1, 101};``` Fields are the ways you get data values in graphql and a field definition represents a field, its type, the arguments it takes and the Data Fetcher used to get data values for that field.
Fields can be thought of as functions in graphql, they have a name, take defined arguments and return a value. Fields can also be deprecated, which indicates the consumers that a field wont be supported in the future. This will return a list of all the directives that have been put on GraphQLNamedSchemaElement as a flat list, which may contain repeatable and non repeatable directives.
To know more about array of integers visit:
https://brainly.com/question/31754338
#SPJ11
an encyclopedia that is used to store all project information is called: a. a data dictionary. b. a case repository c. a lower case tool. d. an upper case tool.
The correct answer to your question is b. a case repository. A case repository is a centralized database that is used to store all relevant information related to a specific project. This information can include everything from project requirements, to design specifications, to technical documentation, and more.
A case repository is often used by teams working on complex projects, as it allows everyone involved to access and share information easily, which helps to improve collaboration and ensure that everyone is working towards the same goals. In contrast, an encyclopedia is a general reference work that contains information on a wide range of topics, organized alphabetically. While an encyclopedia may contain some information related to a specific project, it is not specifically designed to store project-related information. Rather, it is a tool that can be used to research and learn about a broad range of subjects. In conclusion, if you are looking for a tool to store all project information, a case repository is the way to go. It is an essential tool for project teams, helping to ensure that everyone has access to the information they need to complete their tasks effectively and efficiently. I hope this answer helps!
Learn more about case repository here
https://brainly.com/question/28851335
#SPJ11
Given the invoice total we need to create a program
to calculate sale tax that prints invoice total, sales
tax amount, and total price.
The sales tax value is computed based on the
following rules:
1. In case invoice total >= 2000 then sales tax = invoice total
x 15%
2. In case invoice total <= 1999 and invoice total >= 500 then
sales tax = invoice price × 5%
3. In case invoice total less than 500 then sales tax = 0
Compute the total price (total price = invoice price
+ sales tax)
The program that computes the sale tax that prints invoice total, sales
tax amount, and total price is
invoice_total = float(input("Enter the invoice total: "))
if invoice_total >= 2000:
sales_tax = invoice_total * 0.15
elif invoice_total >= 500:
sales_tax = invoice_total * 0.05
else:
sales_tax = 0
total_price = invoice_total + sales_tax
print("Invoice total: $", format(invoice_total, ".2f"), sep="")
print("Sales tax amount: $", format(sales_tax, ".2f"), sep="")
print("Total price: $", format(total_price, ".2f"), sep="")
What is a Sales Tax?A sales tax is a levy levied on the sale of specific products and services and paid to a governing authority.
Generally, laws enable the vendor to collect tax dollars from the consumer at the moment of purchase. A usage tax is a tax on products or services that is paid directly to a governing body by a customer.
Learn more about Sales Tax:
https://brainly.com/question/29442509
#SPJ1
How can you make a view for VIP customers easily available and accessible for all agents?
Making a view for VIP customers easily available and accessible for all agents requires a combination of technology, user permissions, and training.
You may want to consider providing training and support to your agents on how to effectively use the VIP customer view. This can include best practices for engaging with VIP customers, tips for personalization and customization, and strategies for upselling and cross-selling.
To make a view for VIP customers easily available and accessible for all agents, there are several steps you can take. First, you will need to create a VIP customer list or segment within your customer database. This can be done by setting specific criteria such as customer spending history or loyalty program membership.
To know more bout technology visit:
https://brainly.com/question/9171028
#SPJ11
a table design specifies the fields and identifies the primary key in a particular table or file. T/F
True. A table design is a crucial step in creating a database as it determines the structure of the data within a table.
It involves specifying the fields or columns that the table will contain and identifying the primary key, which is a unique identifier for each record in the table. The primary key is used to ensure the integrity of the data and to link related tables in the database. Once the table design is created, it can be used to populate the table with data, query the table to retrieve specific information, and update or delete records as needed.
Learn more about database here:
https://brainly.com/question/30163202
#SPJ11
write a statement that assigns finalvalue with the multiplication of usernum1 and usernum2. ex: if usernum1 is 6 and usernum2 is 2, finalvalue is 12.
To assign the value of the multiplication of two user input numbers (usernum1 and usernum2) to a variable called finalvalue, use the following statement: finalvalue = usernum1 * usernum2. For example, if usernum1 is 6 and usernum2 is 2, the finalvalue will be assigned the value of 12.
You can use the multiplication operator (*) in the assignment statement to multiply usernum1 by usernum2, and then store the result in the finalvalue variable. By multiplying usernum1 and usernum2, the formula finalvalue = usernum1 * usernum2 will determine the finalvalue variable's value. The phrase 6 * 2 will therefore evaluate to 12 if usernum1 is 6 and usernum2 is 2, and finalvalue will be given the value of 12.
To learn more about finalvalue, refer:
brainly.com/question/26542773
#SPJ11
Keeping backup copies of important data stored in a safe place is an example of
a) minimizing losses
b) sending secure information
c) layering
d) blocking attacks
Keeping backup copies of important data stored in a safe place is an example of minimizing losses. Option A is the correct answer.
One of the key aspects of data security is ensuring that important data is not lost or compromised in the event of a security breach or other disaster. One way to achieve this is by creating backup copies of the data and storing them in a secure location. By doing so, even if the original data is lost or damaged, it can be recovered from the backup copies, minimizing losses and reducing the impact of the incident.
Backing up data is an essential part of any data management strategy and is an effective way to protect against various types of threats, including cyber-attacks, natural disasters, hardware failures, and human error. In addition, keeping the backup copies in a secure location ensures that they cannot be accessed by unauthorized individuals, further protecting the confidentiality and integrity of the data. Option A is the correct answer.
You can learn more about backup copies at
https://brainly.com/question/29604354
#SPJ11
