A domestic car manufacturer claims that their sports car will accelerate from rest to a speed of 41.0 m/s in 7.20 s.
(a) Determine the magnitude of the average acceleration of the car (in m/s2).
m/s²
(b) Assume that the car moves with constant acceleration. Find the distance (in m) the car travels in the first 7.20 s.
m
(c) What is the speed of the car (in m/s) 10.0 s after it begins its motion if it continues to move with the same acceleration?
m/s

Answer:

The average speed for the entire trip is 18.75 m/s.  How is average speed calculated?The average speed is the ratio of total length traveled to total time taken to travel that length.Thus, if then,where Sa is average speed of the traveller.WE cannot average the two speeds in conditions of equal distance. WE  need equal time.Here 15 m/s for 10 km would take 666.67 seconds.   and 25 m/s for another 10 km would take 400 seconds. The Total time: 1066.67 seconds. The Total distance 20 km. The  average speed =  20000 m/1066.67 seconds = 18.75 m/s.  If We had gone 15 m/s for the same *time* as going at 25 m/s, then we  could have averaged the speeds directly.  Hence, The average speed for the entire trip is 18.75 m/s.  Learn more about average speed here:brainly.com/question/12322912

Explanation:

Answer: Acceleration is 2m/s^2

Explanation:

The slope of a velocity graph is the acceleration

Acceleration = (Final Velocity - Initial Velocity) / Total Time

A = (12 - 2) / 5

A = 10/5

A = 2

Therefore the acceleration is 2m/s^2

Answer:

Small Devices

Explanation:

firefighters wear small electronic devices that transmit to a location at a command system.

Answer: 45 meters

Explanation:

3 m/s ==> 3 meters/second

15 seconds * 3 meters/second=

15*3/1=

15*3=45 meters

You are done with you vacation and you are about to go back to the u.s. then The local bank of 0.72 gdp is used.

The market worth of all the final goods and services produced and sold (not resold) in a certain time period by countries is measured in dollars using the term "gross domestic product" (GDP).

This measure is frequently amended before being regarded as a trustworthy indication due to its subjective and complex character.

To compare living standards between countries, using a basis of GDP per capita at purchasing power parity (PPP) may be more useful, whereas nominal GDP is more useful for comparing national economies on the global market. GDP (nominal) per capita does not, however, reflect differences in the cost of living and the inflation rates of the countries.

Therefore, You are done with you vacation and you are about to go back to the u.s. then The local bank of 0.72 gdp is used.

To learn more about GDP, refer to the link:

https://brainly.com/question/15682765

#SPJ2

Answer:

In rectilinear motion F = M a describes the motion of a particle

Γ = I α      (torque equals moment of inertia times angular acceleration is the equivalent law in circular motion)

A fixed central force is perpendicular to the direction of motion and cannot change the torque about the point. (for mechanical forces)

However, for electrical forces, F = Q V X B and a changing magnetic field at the center of motion can produce a force perpendicular to the direction of motion.

Perhaps, the question needs to be more specific.

Answer:

D 100kg

Explanation:

[tex]1n = 10kg \\ 10n = g \\ g = 10n \times 10kg \\ = 100kg[/tex]

In the electromagnetic spectrum, the type of radiation that has less energy than visible light is microwave.

The electromagnetic spectrum is the arrangement of all types of electromagnetic radiation in order of decreasing frequencies and increasing wavelength. In the electromagnetic spectrum, the frequencies of the electromagnetic radiation can range from as low as 1 hertz to as high as 100 million hertz.

Frequency is directly proportional to energy. In other words, the more frequency an electromagnetic wave has, the more energy it will also have. The electromagnetic wave with the highest frequency and energy is gamma ray. Visible light falls somewhere in the middle of the spectrum, and the frequency of microwaves is less than that of visible light. Hence, microwaves have less energy than visible light.

Learn more about the electromagnetic spectrum here:

https://brainly.com/question/23727978

#SPJ4

The wavelength is 1.87 m of these radio waves round your answer to 2 significant digits.

Radio waves are part of the electromagnetic spectrum, any radiation of that electromagnetic spectrum has a speed of 3.00x10⁸ m/s in vacuum.

Consequently, the following equation can be used to determine the wavelength:

c =  λ.ν --------- (1)

Where c is the speed of light, λ is the wavelength and  is the frequency.  

Then, λ can be isolated from equation 1

λ = c / ν --------- (2)

Keep in mind that Hz units must be used to express frequency.

ν = 160 MHz x (1000000Hz/1 MHz)

  = 160000000 Hz

λ = 3 x 10⁸ m/s / 160000000 Hz

But 1 Hz = s⁻¹

λ = 3 x 10⁸ m/s / 160000000 s⁻¹

λ = 1.87 m

Hence, the wavelength is 1.87 m

Learn more about radio waves here:

https://brainly.com/question/15135559

#SPJ4

c . The book has potential energy and the bike has kinetic energy statement is correct

Let's use an illustration to demonstrate P. E. and K.E. The hammer has potential energy, which it will have as you raise it higher. On the other hand, the hammer will have kinetic energy when you lower it to strike the surface of the table.

Only chemical energy, which is potential energy held inside the item and in the union of its atoms and molecules, is not regarded as kinetic energy. Motion is created by kinetic energy. Any item in motion has kinetic energy. The more kinetic energy an item possesses, the heavier and quicker it moves. The wheels of a bicycle spin when you push off the pedals.

learn more about P.E. and K.E refer

https://brainly.com/question/23853839

#SPJ1

The moment of inertia of the propeller will be "0.3058 k.gm²"

Given.

Angle of rotation, = 124 rad/s

Work completed, W = 2351.3 J

The Work-Energy Principle is used as,

Kinetic energy Equals Net work done; (W) = (K.E)

We are aware,

→ K.E = × l × ω²

then,

→ W = × l × ω²

By exchanging the values, we obtain

2351.3 = × l × (124)²

thus, The moment of inertia,

I = 2351.3 × 2/[tex]124^{2}[/tex]

= 0.3058 k.gm²

The moment of inertia of the propeller will be "0.3058 k.gm²"

Learn more about  moment of inertia here;

https://brainly.com/question/15246709

#SPJ4

Therefore, the calculated volume is 1000 cm³

The density of a place refers to the quantity of things—which may include people, animals, plants, or objects—there are in it. Divide the number of objects by the area's measurement to determine density. A country's population density is calculated by dividing its total population by its area, expressed in square kilometers or miles. For instance, a block of the harder, lighter element gold (Au) will be denser than a block of the heavier element lead (Pb).

Volume of fish tank = mass/ density

mass=1.0 kg=1000 g

density=1.0 g/cm³

volume=1000 cm³

Therefore, the calculated volume is 1000 cm³

Learn more about density here-

https://brainly.com/question/15164682

#SPJ9

A circuit element that hinders the flow of current is called a resistor.

Nearly all electronic circuit boards use resistors, which are passive parts. The name "resistor" comes from the resistor's function of exhibiting resistance to current flow.

Learn more about resistors here:

https://brainly.com/question/14883432

#SPJ9

Brand equity is a measure of the brand's ability to capture consumer preference and loyalty.

When compared to a generic equivalent, brand equity is the value premium that a firm raises from a product with a successful brand. Companies can build brand equity for their merchandise by making them easily recognizable,  memorable, and superior in terms of quality and dependability.

Customers graciously pay a premium for a company's products when it has good brand equity, even if they could purchase the exact thing from a rival for less. Customers effectively pay a high price to do business with a company they know and respect. Because the business with brand equity does not encounter a higher cost than its competitors to create and distribute the product, the price difference goes to their margin.

To learn more about brand equity: brainly.com/question/14293418

#SPJ4

Answer:

20 m/s

Explanation:

the final velocity of the car = 20 m/s

Change in the velocity = final velocity - initial velocity

Change in the velocity= 20 - 0

= 20 m/s

Thus, the change in the velocity would be 20 m/s.

When using parallax, astronomers calculate distance from the sun and not earth to improve on the accuracy of their measurement, since parallax angle decreases as star distance increases.

Parallax enables astronomers to measure the distances of far away stars by using trigonometry.

As the distance of star increases, the parallax angle decreases, and great degree of accuracy is required for its measurement.

So taking a refence from the earth instead of the sun will impact the accuracy of their measurement.

Thus, when using parallax, astronomers calculate distance from the sun and not earth to improve on the accuracy of their measurement, since parallax angle decreases as star distance increases.

Learn more about parallax distance here: https://brainly.com/question/2128443

#SPJ1

The ball that is thrown upward with an initial velocity of 16 m/s will reach the high point in its flight in a time of: 1.6 s

The formula for the vertical launch upward and the procedure we will use is:

t max = v₀/ g

Where:

Information about the problem:

Applying the maximum time formula we get::

t max = v₀ / g

t max =(16 m/s)/(10 m/s²)

t max = 1.6 s

In physics vertical launch upwards is the motion described by an object that has been launched vertically upwards in which the height and the effect of the earth's gravitational force on the launched object are taken into account.

Learn more about vertical launch at: brainly.com/question/13962796

#SPJ4

The ball's acceleration during its entire motion is  -9.6 m/s^2

The ball's total displacement after 2.00 s is 0 m

From the statements, we have got 2 cases, first we have to find acc and then find the distance, we will kinematics equation to solve this

we have given,

u=19.6 m/s

v=0

t=2 second

a=v-u/t

a= -19.6/2

a= -9.6 m/s^2

the ball's acceleration  is  -9.6 m/s^2

now, we need to find the ball's total displacement after 2.00 s

s=u+gt^2÷2

s= -19.6+9.8×2

s= -19.6+19.6

s= 0 m

the ball's total displacement after 2.00 s is 0 m

To know more about  intensity  visit : https://brainly.com/question/3046924

#SPJ1

The total displacement of the ball in 2 seconds is o meter.

Displacement is defined as the change in position of an item. it's far a vector amount and has a course and magnitude. it's miles represented as an arrow that points from the beginning role to the final function. as an example- If an object moves from A role to B, then the object's position modifications.

Acceleration is the price of alternate of the rate of an object with admire to time. Accelerations are vector portions. The orientation of an item's acceleration is given via the orientation of the internet force performing on that object.

u=19.6 m/s

v=0

t=2 second

a=v-u/t

a= -19.6/2

a= -9.6 m/s²

The acceleration of the ball is  -9.6 m/s²

To find the ball's total displacement after 2.00 s

s=u+gt²÷2

s= -19.6+9.8×2

s= -19.6 +19.6

s= 0 m

Hence, the total displacement of the ball after 2 s is 0 m.

Learn more about displacement here:-https://brainly.com/question/321442

#SPJ1

The answer is correct, the magnet will start rotating and the magnet on the left side will start rotating in a clockwise direction.

Something that can produce magnetic fields, pull similar poles apart, and attract opposing poles.

Basic characteristics of magnets include:

If two magnets are permitted to approach one another, their opposite poles will attract. If they are also given free rotation, their opposite poles will eventually come close to one another. The north poles of two magnets repel one another, and vice versa for the south poles.

To learn more about magnets :

https://brainly.com/question/2841288

#SPJ4

Answer:

Approximately [tex]4.9\; {\rm m\cdot s^{-1}}[/tex] backward, assuming that the canoe was initially stationary.

Explanation:

When an object of mass [tex]m[/tex] is moving at a velocity of [tex]v[/tex], the momentum [tex]p[/tex] of that object would be [tex]p = m\, v[/tex].

With a mass of [tex]m = 67\; {\rm kg}[/tex] and a velocity of [tex]v = 3.3\; {\rm m\cdot s^{-1}}[/tex] forward, the momentum of Fred would be [tex]p = m\, v = 67\; {\rm kg} \times 3.3\; {\rm m\cdot s^{-1}} = 22.11\; {\rm kg \cdot m \cdot s^{-1}}[/tex] (forward.)

Before the jump, the velocity of the boat and Fred were both [tex]0\; {\rm m \cdot s^{-1}}[/tex]. Hence, the momentum of both Fred and the boat would initially be [tex]0\; {\rm kg \cdot m \cdot s^{-1}}[/tex].

Momentum is preserved immediately after the jump. Thus, the momentum of Fred plus the momentum of the boat would still be [tex]0\; {\rm kg \cdot m \cdot s^{-1}}[/tex] after the jump.

Since the momentum of Fred was [tex]22.11\; {\rm kg \cdot m \cdot s^{-1}}[/tex], the momentum of the boat would be [tex](-22.11\; {\rm kg \cdot m \cdot s^{-1}})[/tex] (backward, as the negative sign indicates.)

Rearrange [tex]p = m\, v[/tex] to find velocity in terms of mass [tex]m[/tex] and momentum [tex]p[/tex]:

[tex]\begin{aligned} v &= \frac{p}{m} \\ &= \frac{-22.11\; {\rm kg \cdot m \cdot s^{-1}}}{67\; {\rm kg}} \\ &\approx (-4.9)\; {\rm m \cdot s^{-1}}\end{aligned}[/tex].

In other words, the velocity of the boat would be approximate [tex]4.9\; {\rm m\cdot s^{-1}}[/tex] backwards.

I would chose block-level replication use for only file changes instead of entire file changes. Instead of duplicating the whole system configuration, block storage replication is a type of disaster recovery at the individual volume level.

Depending on your environment, you can set replication of each volume across local and remote computers to go either way and in synchronous or asynchronous modes.

However, block storage replication only duplicates data at the level of a specific volume, not the complete system environment. This strategy has a number of benefits.

Follow the link below to learn more on duplicating files

https://brainly.in/question/29743039

#SPJ4

The region near Tropic zone has the highest average temperatures all year round because the sunlight comes direct on the tropic zone.

In the regions between the equator and the tropics i.e. equatorial region, the solar radiation reaches directly the land vertically during daytime almost the whole year. The temperature is very hot and warm in these regions. Due to high temperatures, more water evaporates in this region and the air has more moisture and high humidity is present. Sunlight hits the Earth directly at the Equator. The sunlight spread over a large area, when we move from the Equator to the poles the temperature becomes decreases. Sunlight falls on a smaller surface area at the Equator so heats up very quickly as compared to the poles.

So we can conclude that Tropic zone has the highest average temperatures all year round because the sunlight comes direct on the tropic zone.

Learn more about temperatures here: https://brainly.com/question/26866637

#SPJ1

According to the  given statement  these option are apply for strong hypothesis:

B-A good hypothesis results in a test with quantifiable outcomes.

C-A good hypothesis leads to a test with measurable results.

E-A good hypothesis provides a possible explanation to answer a scientific question.

A few examples of simple hypotheses: "Students who eat breakfast will perform better on a math exam than students who do not eat breakfast." Complex hypothesis: "Students who experience test anxiety before an English exam will get lower scores than students who do not experience test anxiety."

Simple hypothesis is one example of a hypothesis. complex hypothesis direction-hypothesis

To know more about Hypothesis visit:

https://brainly.com/question/13025783

#SPJ9

Which statement describes the best reason for having a strong hypothesis ?  Check all that apply.

A-A good hypothesis is based on one's personal opinion.

B-A good hypothesis can be tested.

C-A good hypothesis results in a test with quantifiable outcomes.

D-A good hypothesis does not always have to be based on prior knowledge or research.

E-A good hypothesis provides a possible explanation to answer a scientific question.

A 2.0 kg object which is applied a 4.0 n force will travel 1.0 m in 1.0 seconds

To solve this exercise the formula for net force and the formula for uniformly varied rectilinear motion (UVRM) to be applied are:

Where:

Information about the problem:

Applying the net force formula and isolating the acceleration, we get:

F = m * a

a = F/m

a = 4.0 kg * m/s² / 2.0 kg

a = 2.0 m/s²

Applying the formula for UVRM we can calculate the distance:

x = vi * t + (a * t²) / 2

x = 0 m/s * 1 s + (2.0 m/s² * (1 s)²) / 2

x = (2.0 m/s² * 1 s² / 2

x = 2.0 m/ 2

x = 1.0 m

It is the physical magnitude that expresses the effort necessary to move the mass of one kilogram with an acceleration of one meter per second squared, this is expressed in units of the international system in Newton.

Learn more about force at: brainly.com/question/12970081

#SPJ4

100 N is the force that is needed to produce the stress.

Stress in physics is the force exerted on a material’s unit area. Strain is the term for a body’s reaction to stress.

The body can distort under stress. Stress units can be used to quantify the amount of force that a material has experienced.

Stress is equal to (elastic modulus – strain).

Compressional stress is frequently observed in geological settings along convergent borders where tectonic plates contact. This compressional stress is caused by the weight of the rock pressing down on the rock beneath it.

The overall force applied per unit area is referred to as stress. Pressure and stress are the same in terms of units (Newtons per meter).

Stress = Force / Area

Force = stress × Area

          = 1mpa × 1× [tex]10^{-4}[/tex]

          = 100N

To know more about stress visit:

https://brainly.com/question/1178663

#SPJ4

With the concept of Probability the chance of getting exactly 2 defective bulbs is 0.311

Probability is the branch of mathematics which deals with the determination of the chance or likeliness of an event to occur. Probability may be defined as the ratio of favorable outcomes to the total number of outcomes in an event, mathematically,

[tex]Probability( X)=\frac{F}{T}[/tex]

where,

[tex]F[/tex] = favorable outcomes for a random event X.

[tex]T[/tex] =  total outcomes for a random event X.

X = Random event.

Here in the question, there are 24 light bulbs out of which 3 are defective. A person picks 10 bulbs at random, in which we have to find the probability that he selects exactly 2 light bulbs.

So, here the event is X = exactly 2 bulbs are defective out of 10 bulbs.

Now, using Combination, the total number of outcomes possible are,

T = ²⁴[tex]C[/tex]₁₀

The total number of favorable outcomes are,

F = ³[tex]C[/tex]₂ײ¹[tex]C[/tex]₈

The probability of the event X will be,

P(X) =³[tex]C[/tex]₂ײ¹[tex]C[/tex] / ²⁴[tex]C[/tex]₁₀

P(X) = 0.311

To learn more about Probability, visit

https://brainly.com/question/12629667

#SPJ4

Answer: acting, lying, or being across : set crosswise. 2 : made at right angles to the long axis of the body a transverse section.

Explanation:

The greenhouse effect occurs because of the absorption and re-emission of infrared radiation by the atmosphere.

When visible light from the sun enters the earth, it passes through the atmosphere and is absorbed by materials on the earth's surface like rocks, soil and the ocean, which makes the earth heat up. These materials then re-emit infrared radiation. This radiation gets reabsorbed by certain gases in the atmosphere called greenhouse gases, further keeping the earth warm. This effect is known as the greenhouse effect.

The greenhouse effect is essential for all life on earth, as without it, the earth would be a cold, frozen place. However, the level of greenhouse gases in the atmosphere has increased in recent years, further increasing the temperature of the planet, resulting in what is called global warming.

The greenhouse gases include water vapour, methane, carbon dioxide and ozone.

Learn more about the greenhouse effect here:

https://brainly.com/question/13706708

#SPJ4

Answer: The total distance walked is about 59 meters more than the student’s displacement.

Explanation:

The student walked 58.57 meters more than compared to its total displacement from its starting point.

Distance is a measurement of how far apart two things or points are, either numerically or occasionally qualitatively. The distance can refer to a physical length in physics or an estimate based on other factors in common usage.

The term "displacement" refers to a shift in an object's position. It is a vector quantity with a magnitude and direction. The symbol for it is an arrow pointing from the initial location to the ending place. For instance, if an object shifts from location A to position B, its position changes. Displacement is the term used to describe this shift in an object's position.

According to the question :

A student walked 100 meters north and then walks 100 meters west then its displacement will be, according to the Pythagoras theorem

h² = p²+b²

h² = 100² + 100²

h² = 20,000

h = 141.42 meters

This means the total displacement is 141.42 meters, but the student has traveled 200 meters.

200 - 141.42 = 58.57 meters

Hence, the student walks 58.57 meters more than the total displacement.

To get more information about Distance and displacement :

https://brainly.com/question/3243551

#SPJ5

If the wye connected phase to neutral voltage is 277vrms, the phase to phase voltage is 480 VRM S.