A farmer has 8 horses and 12 cows. He put 1/4 of the horses in the barn and 1/4 of cows in the barn. Did he put more horses or cows in the barn? explain

The exact value of the expression is (x-1)/√(1² - (x-1)²).

What is Pythagoras Theorem?

Pythagoras' theorem is a fundamental principle in geometry that states that in a right triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the lengths of the other two sides.

In a reference triangle for sin⁻¹(x-1), the opposite side is x-1, the hypotenuse is 1, and the adjacent side can be found using the Pythagorean theorem:

a² + b² = c²

b² = c² - a²

b = √(c² - a²)

In this case, a = x - 1 and c = 1, so:

b = √(1² - (x-1)²)

Now, we can use the tangent function:

tan(sin⁻¹(x-1)) = tan(θ) = opposite/adjacent = (x-1)/√(1² - (x-1)²)

Therefore, the exact value of the expression is:

(x-1)/√(1² - (x-1)²).

To know more about Pythagoras theorem visit:

https://brainly.com/question/343682

#SPJ4

To find all the spanning trees of a given graph, we can start by selecting any subset of its edges such that the resulting subgraph is still connected and contains all the vertices of the original graph.

We can repeat this process by removing an edge that is part of the chosen subset and adding a new edge that connects two different components of the subgraph until we have explored all possible subsets. In the case of the graph shown below, we can start by selecting any of its edges and checking if the resulting subgraph is still connected.

For example, we can choose the edge between vertices A and C and obtain the following subgraph:

    A---B
     \ /
      X
     / \
    C---D

This subgraph is a tree because it is connected and contains no cycles. We can continue the process by removing an edge and adding a new one until we have explored all possible trees. Note that some of the trees may have the same topology, i.e., they may have the same branching structure, but with different labels on the vertices or edges.

To count the number of different spanning trees, we can use the formula n^(n-2), where n is the number of vertices in the graph. In this case, n=4, so the total number of spanning trees is 4^(4-2) = 16. However, some of these trees may be isomorphic, which means they have the same topology, but with different labels on the vertices or edges.

To count the number of different spanning trees up to isomorphism, we can group them by their topology and count the number of groups. One way to do this is to label the vertices of the graph and count the number of trees that have the same branching structure, but with different vertex labels. Another way is to use the Prüfer sequence, which is a unique code that represents the topology of a tree as a sequence of integers.

Using the first method, we can label the vertices of the graph as follows:

    A---1---B
     \ /   / \
      X   2   Y
     / \ / \ /
    C---3---D

Then, we can enumerate all possible trees that have the same branching structure, but with different vertex labels:

    A---1---B      A---2---B      A---3---B      A---4---B
     \           \           \           \
      X           X           X           X
       \         / \         / \         / \
        3       1   3       2   3       3   1
       /         \ /         \ /         \ /
      C           C           C           D
                   \           \           \
                    Y           Y           Y
                     \         / \         / \
                      2       1   2       2   4

There are four different trees, one for each label of the vertex A. The other vertices can be permuted in six ways, but this does not change the topology of the tree. Therefore, there are 4 different trees up to isomorphism. Alternatively, we can use the Prüfer sequence to obtain the same result:

    A---B
     \ /
      X
     / \
    C---D

The Prüfer sequence of this tree is (2, 3, 3), which uniquely identifies its topology. We can obtain all other trees with the same Prüfer sequence by replacing the labels of the vertices as follows:

    A---C
     \ /
      X
     / \
    B---D

    A---D
     \ /
      X
     / \
    C---B

    A---B
     \ /
      X
     / \
    D---C

Therefore, there are 4 different trees up to isomorphism, as before.

To know more about subsets click here

brainly.com/question/13266391

#SPJ11

The point estimate for the mean is 12.1 and the margin of error is 1.95.

For an interval estimate for the mean with a lower bound of 8.2 and an upper bound of 16, the midpoint of the interval is the point estimate for the mean.

Point estimate for the mean = (Lower bound + Upper bound) / 2 = (8.2 + 16) / 2 = 12.1

The margin of error is the difference between the point estimate for the mean and either the lower or upper bound of the interval. Since the interval estimate given is a two-sided interval, we can take the difference between the point estimate and the lower bound (or the upper bound) and divide by 2 to get the margin of error.

Margin of error = (Upper bound - Point estimate for the mean) / 2 = (16 - 12.1) / 2 = 1.95

Therefore, the point estimate for the mean is 12.1 and the margin of error is 1.95.

To know more about mean visit:

brainly.com/question/2046711

#SPJ4

Based on the regression equation, we can predict the value of the dependent variable given a value of the independent variable.

The equation includes variables that represent the relationship between the dependent and independent variables, allowing us to estimate the dependent variable's value when provided with the independent variable's value. An equation is a mathematical expression that uses symbols and operations to represent a relationship between two or more variables.

Variables are factors that can change and affect the outcome of the equation. In a regression equation, one variable is considered the dependent variable, meaning that its value depends on the value of another variable, called the independent variable.

Regression analysis is a statistical method used to model the relationship between the dependent variable and one or more independent variables. The regression equation is the mathematical formula that represents this relationship. By inputting a specific value for the independent variable into the equation, we can predict the corresponding value of the dependent variable.

It is important to note that the regression equation only predicts the value of the dependent variable based on the values of the independent variable.

It does not necessarily imply causation between the two variables, nor does it measure the association between two variables directly. However, it can be a useful tool for analyzing data and making predictions based on that data.

To know more about variable click here

brainly.com/question/2466865

#SPJ11

This means that there are 10 different combinations of 3 items that we can choose from the set {A, B, C, D, E}. These combinations are:

{A, B, C}, {A, B, D}, {A, B, E}, {A, C, D}, {A, C, E}, {A, D, E}, {B, C, D}, {B, C, E}, {B, D, E}, and {C, D, E}.

The number of possible ways to select a subset of items of a given numerosity from a larger set is known as the binomial coefficient in combinatorics.

The binomial coefficient, denoted by ()(nk) or sometimes by (nk), gives the number of ways to choose k items from a set of n distinct items, without regard to their order.

The notation ()(nk) is read as "n choose k" or "the number of combinations of n things taken k at a time".

The formula for the binomial coefficient is given by the expression:

()(nk) = n! / (k!(n-k)!),

where n! (n factorial) is the product of all positive integers up to n, k! (k factorial) is the product of all positive integers up to k, and (n-k)! ((n-k) factorial) is the product of all positive integers from (n-k) up to n.

For example, if we have a set of 5 distinct items {A, B, C, D, E}, the number of ways to choose 3 items from this set, without regard to their order, is given by:

()(53) = 5! / (3!2!) = 10

This means that there are 10 different combinations of 3 items that we can choose from the set {A, B, C, D, E}. These combinations are:

{A, B, C}, {A, B, D}, {A, B, E}, {A, C, D}, {A, C, E}, {A, D, E}, {B, C, D}, {B, C, E}, {B, D, E}, and {C, D, E}.

Learn more about binomial coefficient on:

https://brainly.com/question/14216809

#SPJ4

The critical value of F for a .05 significance level, with within-groups degrees of freedom of 15 and between-groups degrees of freedom of 5, is approximately 2.901.

To find the critical value of F, you need to consult an F-distribution table, which you can find in a statistics textbook or online. Using the table, locate the row corresponding to the between-groups degrees of freedom (5) and the column corresponding to the within-groups degrees of freedom (15). The intersection of this row and column will give you the critical value of F for a .05 significance level.

Remember that the critical value of F is used to determine whether there is a significant difference between group means in an analysis of variance (ANOVA) test. If your calculated F-value is greater than the critical value, you would reject the null hypothesis and conclude that there is a significant difference between the group means.

To know more about critical value  visit:

brainly.com/question/30762645

#SPJ11

Answer:

Okay, here are the GCF (Greatest Common Factor) and LCM (Lowest Common Multiple) for each pair of numbers:

   6,15 ________

   GCF = 3

   30,48 __________

   GCF = 30

   6 and 9 _________

   LCM = 18

   12 and 30 ____________

   LCM = 60

KEY:

240=i 3=g 18=d 30=e 20=t 60=l 6=a

#1 #2 #3 #4

Let me walk through the steps for each problem:

   To find the GCF of 6 and 15:

   Find all factors of 6: 1, 2, 3, 6

   Find all factors of 15: 1, 3, 5, 15

   The greatest common factor is 3.

   The GCF of 30 and 48 is 30.

   To find the LCM of 6 and 9:

   Find all factors of 6: 1, 2, 3, 6

   Find all factors of 9: 1, 3, 9

   The lowest common multiple that contains all factors is 18.

   The LCM of 12 and 30 is 60.

Does this help explain the steps and solutions? Let me know if you have any other questions! I can also show additional examples if needed.

Let me know if you understand the GCF and LCM concepts and are able to proceed to the key. I can explain that part in more detail.

Step-by-step explanation:

Answer: 7/40

Step-by-step explanation:

The school has $6,375 left to buy supplies for next year's play.

Let's "a" represents the number of adults and "c" represents the number of children. We can then use these variables to represent the amount of money collected from their tickets.

The amount of money collected from adults is given as $8 for each adult's ticket. So, the total amount collected from adults can be represented as 8a. Similarly, the amount of money collected from children is given as $3 for each child's ticket. So, the total amount collected from children can be represented as 3c.

We are also given that there were 80 adults and 20 children at the school play. We can use these numbers to create two equations:

a + c = 100 (equation 1)

80a + 20c = total amount collected from tickets (equation 2)

By using substitution method to solve these equations. We can rearrange equation 1 to get c in terms of a:

c = 100 - a

We can then substitute this expression for c in equation 2:

80a + 20(100 - a)

Simplifying the above equation, we get:

60a + 2000 = total amount collected from tickets

We know that $125 was donated to the local theater program. So, the amount of money left to buy supplies for next year's play can be represented as:

total amount collected from tickets - $125

Substituting the value of total amount collected from tickets from the above equation, we get:

60a + 2000 - $125

Simplifying the above equation, we get:

60a + 1875 = amount left to buy supplies

By substituting the value of "a" from equation 1 to get:

60(80) + 1875 = amount left to buy supplies

Simplifying the above equation, we get:

$6,375 = amount left to buy supplies

Therefore, the school has $6,375 left to buy supplies for next year's play.

To know more about Equations here

https://brainly.com/question/10413253

#SPJ4

Complete Question is There were 80 adults and 20 children at a school play. The school collected $8 for each adult's ticket and $3 for each child's ticket. The school donated $125 of the money from tickets to local theater program and used the remaining money to buy supplies for next year's school play. How much money does the school have to buy supplies for nest year's play?  

Okay, let's break this down step-by-step:

* Meghan spent the same amount, m, each day this week at the cafeteria

* She spent money at the cafeteria each of Monday, Tuesday, Wednesday, Thursday and Friday

* So in total she spent money for 5 days

* Therefore, the total amount of money Meghan spent this week is:

5 * m

So the expression that represents the amount Meghan spent this week is:

5 * m

The other options do not represent spending the same amount m each of 5 days. So the correct choice is:

5 * m

The period of the pendulum (t) is approximately 4.77 seconds.

The formula for a basic pendulum's period is

T = 2π√(L/g)

where L is the pendulum's length and g is its gravitational acceleration.

Substituting the given values, we get:

T = 2π√(5.64/9.8)

Simplifying the expression inside the square root, we get:

T = 2π√(0.5755)

Calculating the square root, we get:

T = 2π(0.759)

Multiplying by 2 and π, we get:

T = 4.77 seconds (rounded to two decimal places)

Therefore, the period of the pendulum is approximately 4.77 seconds.

To know more about the Period of Pendulum visit:

https://brainly.com/question/29268528

The probability of randomly picking an orange from Jeff's box of fruit is 0.25 or 25%.

To determine the probability of picking an orange from Jeff's box of fruit, we need to first understand the concept of probability. Probability is the measure of the likelihood of an event occurring. It is expressed as a number between 0 and 1, with 0 indicating that the event is impossible and 1 indicating that the event is certain.

In this case, we know that Jeff has a box of fruit, and we are interested in the probability of picking an orange. To calculate this probability, we need to know the total number of fruits in the box and the number of oranges.

Assuming that Jeff's box contains a variety of fruits, we can estimate the total number of fruits in the box. Let's say there are 20 fruits in total. Now, we need to determine the number of oranges in the box. Let's say there are 5 oranges in the box.

To calculate the probability of picking an orange, we can use the following formula:

Probability of picking an orange = Number of oranges / Total number of fruits

Plugging in our numbers, we get:

Probability of picking an orange = 5 / 20

Simplifying, we get:

Probability of picking an orange = 0.25

Learn more about probability here:

brainly.com/question/30034780

#SPJ11

Answer:

63 miles/1.4 hours = 45 mph

(55 mph)(4 hours) = 220 miles

To prove that line AB is equal to line CD and line BC is equal to line AD in parallelogram ABCD, we can use the properties of parallelograms.

1. Opposite sides of a parallelogram are parallel.

Since ABCD is a parallelogram, we know that AB is parallel to CD and BC is parallel to AD.

2. If two parallel lines are intersected by a transversal, then the alternate interior angles are congruent.

Using the fact that AB is parallel to CD, we can draw a transversal line, say line EF, intersecting these parallel lines at points E and F. This gives us alternate interior angles AEF and CFE, which are congruent. Similarly, using the fact that BC is parallel to AD, we can draw another transversal line, say line GH, intersecting these parallel lines at points G and H. This gives us alternate interior angles CBG and DAG, which are congruent.

3. If two angles of a parallelogram are congruent, then the other two angles are also congruent.

From step 2, we know that angle AEF is congruent to angle CFE and angle CBG is congruent to angle DAG. Using the fact that the opposite angles of a parallelogram are congruent, we can say that angle ABD is congruent to angle CDA and angle BCD is congruent to angle DAB.

4. If two angles of a quadrilateral are congruent, then the opposite sides of the quadrilateral are congruent.

Using step 3, we know that angle ABD is congruent to angle CDA and angle BCD is congruent to angle DAB. Therefore, we can say that AB is congruent to CD and BC is congruent to AD.

Therefore, we have proved that line AB is equal to line CD and line BC is equal to line AD in parallelogram ABCD.

The 95% confidence interval estimate of , the mean procrastination scale for first-year students at this college is equals to the (35.311, 38.488).

We have a sample of 65 first-year students selected from a large university in England, with

Sample Size, n = 65.0

Sample Mean, [tex]\bar x[/tex] = 36.9

Standard deviation,s = 6.41

Significance level, α = 1- 0.95 = 0.05

Degree of freedom, df = n- 1 = 65.0 - 1

= 64.0

We have to determine the 95% confidence interval for population mean μ , so, Point estimate, [tex]\bar x[/tex]

= 36.9

Critical value at α = 0.05 with df = 64.0 is

[tex]t_{(\frac{α}{2},df)} = 1.998[/tex] (from student t table)

From Margin of error formula,

[tex]ME = t_{(\frac{α}{2},df )} \frac{s}{\sqrt{n}}[/tex]

Substitute all known values in above formula, [tex]= 1.998 × \frac{6.41}{\sqrt{65}}[/tex] = 1.5885

Thus, Margin of error is 1.5885. Now 95% confidence interval is CI = point estimate ± ME = 36.9 ± 1.5885

= (35.311, 38.488)

Hence, required value of confidence is (35.311, 38.488).

For more information about confidence interval, visit:

https://brainly.com/question/17097944

#SPJ4

Answer:

77

Step-by-step explanation:

The probability function is a mathematical concept that maps the probability of an event to a certain value.

It is often used to model the likelihood of an event occurring, based on certain conditions or variables. The probability function can take on many different forms, depending on the nature of the problem being studied.

One important tool in probability theory is the counting rule for combinations. This rule allows us to calculate the number of possible combinations of items from a larger set, given certain constraints.

For example, we might want to know how many ways there are to choose three different objects from a set of five, without regard to order. The counting rule for combinations is based on the idea that the order in which objects are chosen doesn't matter.

Therefore, we can calculate the number of combinations by dividing the total number of possible permutations by the number of ways that the objects can be ordered.

This leads to the formula nCr = n/ r * (n-r), where n is the total number of objects, r is the number of objects being chosen, and ! represents the factorial function.

The probability function can make use of the counting rule for combinations in various ways, depending on the nature of the problem being studied.

For example, in the case of a discrete probability distribution, the function might assign probabilities to different outcomes based on the number of combinations that lead to each outcome.

This can be especially useful in situations where the outcomes are not equally likely, or where there are different levels of uncertainty or randomness involved.

Overall, the counting rule for combinations provides an important tool for calculating probabilities in many different contexts. By understanding the relationship between combinations and probability,

we can better understand the underlying structure of many different types of problems in statistics, mathematics, and other fields.

To know more about probability click here

brainly.com/question/15124899

#SPJ11

To determine how many papers the newspaper boy should order each day, we need to consider his profit margin. His profit is the difference between the revenue earned from selling the papers and the cost of buying them.

The revenue earned is the number of papers sold multiplied by the selling price of $0.50. The cost of buying the papers is the number of papers ordered multiplied by the buying price of $0.30. Let's say he orders x papers each day. The expected value of his revenue can be calculated as x multiplied by the mean of 100 papers,

which is 100x. The expected value of his cost can be calculated as x multiplied by the buying price of $0.30, which is 0.3x. His profit can then be calculated as the difference between his revenue and cost, which is 0.2x (since the selling price of $0.50 minus the buying price of $0.30 is $0.20 profit per paper).

To maximize his profit, he should order the number of papers that gives him the highest expected profit. This occurs at the point where the deviation from the mean is zero. In other words, he should order the number of papers that gives him the highest probability of selling all of them, without having any unsold papers that he needs to throw away.

Using the formula for standard deviation, we can calculate that the probability of selling all 100 papers is 68.3%. The probability of selling 101 papers is slightly lower at 64.2%, while the probability of selling 99 papers is also slightly lower at 64.2%.

Therefore, to maximize his profit, the newspaper boy should order 100 papers each day, since this gives him the highest probability of selling all of them without having any unsold papers. This would give him a daily profit of $10 (100 papers sold x $0.20 profit per paper).

To know more about probability click here

brainly.com/question/15124899

#SPJ11

Answer:

64,339 = π(r^2)(20)

r^2 = 1,023.987

r = 32 ft

For the current is rate of charge flows through a surface, [tex] \frac{ dQ}{dt} = I [/tex], the charge passes through the surface after 9 seconds is equals to 2052 C.

There is amount of charge passing through a surface, by a function Q(t) is measured in coulombs C. The modeled current function, I(t) = 9t²- 4t + 3 --(1)

where t denotes the time in second. We have to determine the charge passes through the surface after 9 seconds. As we know current is defined as a rate at which charge flows through a surface, i.e., [tex] \frac{ dQ}{dt} = I [/tex]. The units used for current is Ampere, A. From equation (1) and (2), [tex]\frac{ dQ}{dt} = 9t² - 4t + 3[/tex]

So, for determining the charge we integrate, the previous equation with respect to the time t, [tex]\int \frac{ dQ}{dt} dt = \int_{0}^{t} I(t) dt = \int_{0}^{9} ( 9t² - 4t + 3) dt[/tex]

[tex]Q =[\frac{9t³}{3} - \frac{ 4t²}{2} + 3t]_{0}^{9}[/tex]

[tex] = 3× 9³ + 27 - 2× 9²[/tex]

= 2052

Hence, required value is 2052 coulombs.

For more information about rate , visit :

https://brainly.com/question/13562393

#SPJ4

Complete question:

The amount of charge passing through a surface, given by a function Q(t), is measured in coulombs C. The current is the rate at which charge flows through a surface. This function is I(t) and is measured in amperes, A, or coulombs per second, C/s. If a current for a certain surface is modeled by the function I(t)=9t² −4t + 3 for t≥0, how much charge passes through the surface after 9 seconds? ______________coulombs

The dimension of rectangles  with  the smallest perimeter are 2 units 2 by 5 units

The area of Rectangle is the product of its length to its width

i.e., Area of rectangle = length x width

Given:

Area of rectangle = 20 square feet

Now, Area of rectangle = length x width

length x width = 20

Now, factorize 20 as

=2 × 2 × 5

=4× 5

=20 units

So, the dimension of rectangles are 2 units 2 by 5 units.

A closed path that covers, encircles, or outlines a one-dimensional length or a two-dimensional shape is called a perimeter. A circle's or an ellipse's circumference is referred to as its perimeter. There are numerous uses in real life for perimeter calculations.

The length of a shape's outline is its perimeter. must add the lengths of all four sides of a rectangle or square to determine its perimeter. In this instance, x represents the rectangle's length and y its width.

To know more about perimeter of rectangle, , visit

https://brainly.com/question/29595517

#SPJ4

Without the histograms, there's no specific region as an answer. However, you can follow these steps to determine the region with the least standard deviation in level of interest based on the provided data.

To determine the region with the least standard deviation in level of interest, we need to analyze the histograms for each region. Standard deviation is a measure of how spread out the data is. The region with the least standard deviation will have data points that are more closely clustered around the mean (average) level of interest.


1. Examine the histograms for each region.
2. Look for the region where the data points are more tightly grouped around the mean level of interest. This indicates less variability and a smaller standard deviation.
3. Identify the region with the least standard deviation in level of interest.

To determine the region with the least standard deviation in the level of interest, examine the histograms for each region and identify the one where data points are tightly clustered around the mean level. Calculate the standard deviation for each region and select the region with the smallest value, indicating a more concentrated and less variable distribution of the level of interest.

Learn more about standard deviation here:

brainly.com/question/23907081

#SPJ11

The time it will it take him to grade 150 papers is 32 minutes, 4 seconds

It is important to note that proportion is a method of comparison in which two expressions or equations are made equal to each other.

From the information given, we have that;

Mr. B grades a total of 12.5 papers in 2.7 minutes.

Then, for 150 papers, we would have;

If 12. 5 papers = 2.7 minutes

Then 150 papers = x

Cross multiply the values

12.5x = 2.7(150)

multiply the values

12.5x = 405

Divide the values by the coefficient of x, we get;

x = 405/12.5

x = 32 minutes, 4 seconds

Learn about proportion at: https://brainly.com/question/1781657

#SPJ1

The function g(x) has vertical asymptotes at x = 5 and x = -5, a horizontal asymptote at y = 0, an x-intercept at (-2, 0), and a y-intercept at (0, -2/25).

To determine the asymptotes, intercepts, and multiplicities of the rational function g(x) = (x + 2)/(x^2 - 25), we need to analyze its denominator and numerator separately.

First, we will analyze the denominator x^2 - 25. This is a quadratic polynomial that can be factored as (x - 5)(x + 5). Therefore, the function g(x) has vertical asymptotes at x = 5 and x = -5, where the denominator is equal to zero.

Next, we will analyze the numerator x + 2. This is a linear polynomial that intersects the x-axis at x = -2, where y = 0.

To determine the multiplicities of the asymptotes, we can look at the factors in the denominator. We see that the factor (x - 5) has a multiplicity of 1, while the factor (x + 5) also has a multiplicity of 1. Therefore, the function has simple vertical asymptotes at x = 5 and x = -5.

To summarize:

Vertical asymptotes: x = 5 and x = -5

Horizontal asymptote: The degree of the numerator is less than the degree of the denominator, so there is a horizontal asymptote at y = 0.

x-intercept: (-2, 0)

y-intercept: To find the y-intercept, we set x = 0 and evaluate g(0) = (0 + 2)/(-25) = -2/25.

Therefore, the function g(x) has vertical asymptotes at x = 5 and x = -5, a horizontal asymptote at y = 0, an x-intercept at (-2, 0), and a y-intercept at (0, -2/25).

Learn more about asymptotes here:

https://brainly.com/question/4084552

#SPJ1

For two fair dices, one is 6 sided and other one 12 sided,

a) The probability mass function values for all probability values is present in above figure 2.

b) The expected value of this discrete random variable is equals to 9.9999.

c) The variance of this discrete random variable is equals to 14.8339.

We have two fair dices, one is 6 sided fair die with values {1, 2, 3, 4, 5, 6} and a fair 12 sided die with values {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12}. A discrete random variable is created by rolling the two dice and adding the numerical results together. Now, we have to determine all values. The sample space, S for fair 12 sided die is present in above figure. It is also contains sample space of fair 6 sided die.

a) The probability mass function (pmf) is defined as a function over the sample space of a discrete random variable X which the probability that X is equal to a certain value, that is f(x) = P[X=x]. So,

the probability mass function for the probability of all possible values of this random variable is present in above figure 2.

b) The expected value, E(X), or mean μ of a discrete random variable X, is calculated by multiplying each value of the random variable by its probability and add the products. The formula is , E ( X ) = μ = ∑ x P ( x ), so the table for excepted value determined by using above formula present in above figure 3. So, the excepted value is 9.9999.

d) The variance for discrete variable X is calculated by using the following

[tex]Var(X) = \sum( X - \mu)× P(X)[/tex]

variance value for all probability values is present in above figure. The total sum

= 14.8339

Hence, required variance value is 14.8339.

For more information about fair die, visit :

https://brainly.com/question/31633569

#SPJ4

The average student headcount for the spring terms is: 10700

A graph is a non-linear kind of data structure made up of nodes or vertices and edges. The edges connect any two nodes in the graph, and the nodes are also known as vertices. This graph has a set of vertices V= { 1,2,3,4,5} and a set of edges E= { (1,2),(1,3),(2,3),(2,4),(2,5),(3,5),(4,50 }.

We have the information:

From the graph,

Number of headcounts for spring '0.2 - 0.3' = 10900

Number of headcounts for spring '0.3 - 0.4' = 10500

Number of headcounts for spring '0.4 - 0.5' = 10700

The average student headcount for the spring terms is:

= 1/3 (10900 + 10500 + 10700)

= 10700

Learn more about Average at:

https://brainly.com/question/24057012

#SPJ4

For complete question, to see the attachment.

To find Aliyaah's percentile, we first need to calculate her z-score: $z = \frac{x - \mu}{\sigma} = \frac{46.0 + 0.96(2.7)}{2.7} \approx 2.26$

Using a standard normal distribution table, we can find that the area to the left of $z = 2.26$ is approximately 0.988. This means that Aliyaah's height is at the 98.8th percentile.

To compare Aliyaah's height to Jayne's height, we need to find Jayne's z-score. We can use the standard normal distribution table again, this time to find the z-score that corresponds to the 93rd percentile. We find that $z \approx 1.48$.

This means that Jayne's height is 1.48 standard deviations above the mean. Since Aliyaah's height is only 0.96 standard deviations above the mean, we can conclude that Jayne is taller than Aliyaah.

Learn more about Percentile here:- brainly.com/question/28839672

#SPJ11

The value of x in the right triangle is 26.43 degrees.

A right-angle triangle is a triangle that has one of its angles as 90 degrees. The sum of angles in a triangle is 180 degrees.

According to the position of the angle, the sides of the right-angle triangle are as follows:

Therefore, let's use trigonometry to find the side x of the right triangle.

Hence,

sin 27 = opposite / hypotenuse

opposite side = 12 units

hypotenuse = x

sin 27  = 12 / x

cross multiply

x = 12 / sin 27

x = 12 / 0.45399049974

x = 26.4323002709

Therefore,

x = 26.43 degrees.

learn more on triangle here: brainly.com/question/25950519

#SPJ1

Floating strainers can be used to provide the flow required to reach the capacity of a pumping apparatus in shallow water.

Among the given options, the minimum depth for using floating strainers is typically 6 inches (150 mm) (option b).

This depth allows for efficient operation without risking damage or drawing in debris that could hinder the pumping process. When it comes to providing the necessary flow required to reach the capacity of the pumping apparatus, floating strainers can be a useful tool.

These strainers are designed to filter out debris and prevent clogs, ensuring that the water being pumped is clean and free-flowing. However, the effectiveness of a floating strainer is limited by the depth of the water it is operating in.

According to the question, the options for the shallowest depth of water that a floating strainer can be used in range from 3 inches (75 mm) to 1 foot (300 mm).

It's important to note that the shallower the water, the more difficult it may be for a floating strainer to maintain a steady flow. This is because the intake of the strainer may be too close to the bottom of the water source, making it harder for the strainer to draw in water.

In general, it's recommended to use a floating strainer that is appropriate for the depth of water you will be pumping from. This means that if you're working with a water source that is only a few inches deep,

you should opt for a strainer that is designed to work in shallower depths. This will help ensure that the strainer is able to effectively filter out debris and maintain a steady flow of water, which is crucial when using a pumping apparatus.

In conclusion, the answer to the question is a. 3 inches (75 mm) - a floating strainer can be used for water sources as shallow as 3 inches (75 mm),

but it's important to choose a strainer that is appropriate for the To of water you will be working with to ensure that it can maintain a steady flow and effectively filter out debris.

To know more about depth click here

brainly.com/question/29198000

#SPJ11

Answer:

A, D

Step-by-step explanation:

A letter or a symbol that stands for a number is a variable.

In choice A, ? stands for a number.

In choice D, x stands for a number.

Choices B and C only have numbers, so there are no variables there.

Answer: A, D