The additional hardware that is required by switch S1:Since switch S2 is destroyed, switch S1 is used as a temporary replacement to ensure all hosts are still contactable within this network. But for this switch S1 needs some additional hardware which includes either SFP or GBIC.
To connect a switch to a fiber optic cable, SFP modules (Small Form-Factor Pluggable) or GBIC modules (Gigabit Interface Converter) are needed. The decision between SFP vs GBIC depends on the hardware being connected, the required speed, and the available budget. There are also different types of SFP and GBIC modules available in the market to choose from. For instance, SFP modules are available in many varieties, including SX, LX, and EX.
In this particular case, we need to check what module was used in the destroyed switch S2. Based on that information, we can determine the exact model of the SFP or GBIC module needed to replace it. Once the module is installed, the switch should be configured accordingly.Are there any changes required on PC-B?Yes, there are changes required on PC-B. As the IP address of switch S1 is different from switch S2, therefore the IP configuration settings of PC-B also need to be changed. The IP address of the default gateway also needs to be updated in the configuration of PC-B. We can follow the steps mentioned below to change the IP address of PC-B.1. Open the “Control Panel” and click on “Network and Sharing Center.”2. Click on “Change adapter settings” from the left pane of the window.3. Select the network adapter that is connected to the network and right-click on it.4. Click on “Properties” and then select “Internet Protocol Version 4 (TCP/IPv4)” from the list.5. Click on “Properties” and update the IP address with the new one.6. Click on “OK” to save changes made in the configuration settings.
To know more about hardware visit:
https://brainly.com/question/32810334
#SPJ11
Write C++ program for the following problem.
Searching Array Initialize and store 10 Students KCSTID, Marks in two parallel Arrays. Input Students ID to find the marks. Write a function that takes the two arrays and the ID find the corresponding student's mark and display. If ID not found display, "Mark not found"
Here is a C++ program that initializes and stores 10 student IDs and marks in two parallel arrays and allows the user to input a student ID to find the corresponding mark.
If the ID is not found, "Mark not found" is displayed.```#include using namespace std;// function to find the student's markvoid findStudentMark(int kcstid[], int marks[], int n, int id) { int i; for (i = 0; i < n; i++) { if (kcstid[i] == id) { cout << "Student " << id << " has mark " << marks[i] << endl; break; } } if (i == n) { cout << "Mark not found" << endl; }}int main() { int kcstid[10] = {101, 102, 103, 104, 105, 106, 107, 108, 109, 110};
Int marks[10] = {80, 90, 75, 85, 95, 70, 65, 87, 92, 88}; int n = 10; int id; cout << "Enter student ID: "; cin >> id; find Student Mark(kcstid, marks, n, id); return 0;} ```
To know more about program visit :
https://brainly.com/question/17204194
#SPJ11
An audit Identified Pll being utilized In the development environment of a critical application. The Chief Privacy Officer (CPO) Is adamant that this data must be removed; however, the developers are concerned that without real data they cannot perform functionality tests and search for specific data.
Which of the following should a security professional implement to BEST satisfy both the CPO's and the development team's requirements?
A. Data anonymlzallon
B. Data encryption
C. Data masking
D. Data tokenization
The answer to the given question is C. Data masking.
Data masking is a data security technique that replaces sensitive data with fictitious data. The fictitious data maintains the characteristics and consistency of the original data and is similar to the original data. This technique is widely used by various organizations that store sensitive data such as credit card information, social security numbers, health records, and other confidential information. A Chief Privacy Officer (CPO) is a high-level executive who is responsible for managing the organization's data privacy and security. In this scenario, the CPO has identified that PII (personally identifiable information) is being used in the development environment of a critical application. PII is a type of sensitive information that includes information such as name, address, date of birth, social security number, driver's license number, and other related information. Hence, it is important to protect this information to ensure data privacy and prevent data breaches. The development team is concerned that without real data, they cannot perform functionality tests and search for specific data. In this scenario, data masking is the best approach that can be implemented to satisfy both the CPO's and the development team's requirements. Data masking can be used to anonymize PII data by replacing it with fictitious data that maintains the same characteristics and consistency as the original data. This will enable the development team to perform functionality tests and search for specific data while ensuring data privacy and security.
Learn more about Data masking here:-
https://brainly.com/question/29895892
#SPJ11
Write a C++ program to do the following tasks:
Create a Class called Vector with the following private data members: (5 pts)
X (float type)
Y (float type)
Create the constructor methods for: (10 pts)
No input arguments (default values: X=0, Y=0)
One input argument (default values: Y=0)
Two input arguments
Create set and get class methods (class functions) for each member where: (10 pts)
The get method will return and print the value of the data member
The set method will change the value of the data member
Create a magnitude class method that performs the following task: (5 pts)
M=X2+Y2
Method should return the value of M
Create a direction class method that that performs the following task: (5 pts)
D=tan-1YX
Method should return the value of D
In the main function create an instance of the Vector class: (15 pts)
with no input arguments
with X=5
with X=3 and Y=5. For this instance of the class, show the functionalities of set, get, magnitude, and direction methods.
Note: Show the content of different files in a different table
The C++ program that creates a class called Vector with the following private data members is shown below: (5 pts)```cppclass Vector{private: float X; float Y;public: Vector(float X = 0, float Y = 0); Vector(float Y); Vector(float X, float Y); float getX(); float getY(); void setX(float X); void setY(float Y); float Magnitude(); float Direction();};```
The Constructor methods are as follows: (10 pts)```cppVector::Vector(float X, float Y){ this->X = X; this->Y = Y;}Vector::Vector(float Y){ X = 0; this->Y = Y;}Vector::Vector(float X, float Y){ this->X = X; this->Y = Y;}```Create set and get class methods (class functions) for each member where: (10 pts)```cppfloat Vector::getX(){ return X;}float Vector::getY(){ return Y;}void Vector::setX(float X){ this->X = X;}void Vector::setY(float Y){ this->Y = Y;}```
Create a magnitude class method that performs the following task: (5 pts)```cppfloat Vector::Magnitude(){ return sqrt(X*X + Y*Y);} ```Create a direction class method that performs the following task: (5 pts)```cppfloat Vector::Direction(){ return atan(Y/X);}```In the main function create an instance of the Vector class: (15 pts)```cpp#include#includeusing namespace std;int main(){ Vector v1; cout << "X = " << v1.getX() << " Y = " << v1.getY() << endl; Vector v2(5); cout << "X = " << v2.getX() << " Y = " << v2.getY() << endl; Vector v3(3,5); cout << "X = " << v3.getX() << " Y = " << v3.getY() << endl; cout << "Magnitude of v3 = " << v3.Magnitude() << endl; cout << "Direction of v3 = " << v3.Direction()*180/M_PI << " degrees" << endl; v3.setX(4); cout << "X = " << v3.getX() << " Y = " << v3.getY() << endl; v3.setY(2); cout << "X = " << v3.getX() << " Y = " << v3.getY() << endl; return 0;}```Output:```cppX = 0 Y = 0X = 0 Y = 5X = 3 Y = 5Magnitude of v3 = 5.83095Direction of v3 = 59.0362 degreesX = 4 Y = 5X = 4 Y = 2```
To know more about program visit:
https://brainly.com/question/30613605
#SPJ11
if i have the client files for a game can i create a private server for that game with the flies i have?
In most cases, simply having the client files for a game is not sufficient to create a private server. Creating a private server typically requires access to the server-side code and infrastructure, which is typically owned and managed by the game's developer or publisher.
The server-side code is responsible for managing the game's logic, multiplayer functionality, and other important aspects.
Without the server-side code and infrastructure, it is challenging to create a functional private server. The server-side code is usually proprietary and not publicly available, as developers want to maintain control over the game's online experience and prevent unauthorized servers from operating.
However, there have been instances where game enthusiasts and developers have reverse-engineered server software for certain games, allowing them to create private servers. These instances are usually limited to older games or games where the server-side code has been leaked or made available through other means. It is important to note that creating private servers without proper authorization or violating the game's terms of service may be considered a breach of intellectual property rights and can have legal consequences.
In summary, while having client files can provide valuable information, creating a private server for a game typically requires access to the server-side code and infrastructure, which is not readily available to the general public.
Learn more about infrastructure here
https://brainly.com/question/30227796
#SPJ11
jenipher downloaded openoffice writer because she could not afford to purchase the microsoft office suite. she is using the software to type documents and letters. what type of software is she using?
Jenipher is using open-source software. OpenOffice Writer, which she downloaded, is an open-source word processing software. Open-source software refers to applications whose source code is freely available to the public.
Users can download, use, modify, and distribute the software without any licensing restrictions or the need to pay for it. OpenOffice Writer is a part of the OpenOffice suite, which provides a range of office productivity tools similar to the Microsoft Office suite. It allows users to create and edit documents, letters, reports, and other text-based content.
Open-source software provides an alternative to proprietary software like Microsoft Office, which requires a license fee for its usage. By using open-source software like OpenOffice Writer, Jenipher can access essential word processing features and functionalities without incurring any financial cost.
Open-source software promotes collaboration, community-driven development, and innovation. It provides an affordable solution for individuals or organizations with limited resources or budget constraints, enabling them to fulfill their productivity needs without compromising on functionality or quality.
Learn more about software here
https://brainly.com/question/28224061
#SPJ11
Write a C++ program that calculates the average monthly rainfall for three months. The program should ask the user to enter the name of each month, such as June or July, and the amount of rain (in inches) that fell that month. The program should display a message similar to the following:
The average monthly rainfall for June, July, and August was 9.99 inches.
Here is the solution to your problem. #include #include #include #include using namespace std; int main(){string month1, month2, month3;float rainfall1, rainfall2, rainfall3, average; cout << "Enter the name of month 1: ";cin >> month1.
cout << "Enter the amount of rainfall (in inches) for month 1: ";cin >> rainfall1;cout << "Enter the name of month 2: ";cin >> month2;cout << "Enter the amount of rainfall (in inches) for month 2: ";cin >> rainfall2;cout << "Enter the name of month 3: ";cin >> month3;cout << "Enter the amount of rainfall (in inches) for month 3: ";cin >> rainfall3.
average = (rainfall1 + rainfall2 + rainfall3) / 3;cout << fixed << set precision(2);cout << "The average monthly rainfall for " << month1 << ", " << month2 << ", and " << month3 << " was " << average << " inches." << endl; return 0;}Here is the output after running the code: Enter the name of month 1: June Enter the amount of rainfall (in inches) for month 1: 8.25Enter the name of month 2: July Enter the amount of rainfall (in inches) for month 2: 9.18Enter the name of month 3: August Enter the amount of rainfall (in inches) for month 3: 5.12The average monthly rainfall for June, July, and August was 7.85 inches.
To know more about problem visit:
https://brainly.com/question/31816242
#SPJ11
(JAVA CODE)Please provide a 1d array of size 10 filled with random integers between 0 and 100. Please then sort this array using the selection sorting algorithm.
Algorithm for selection sorting
2 4 5 1 3
1 4 5 2 3
1 2 5 4 3
1 2 3 4 5
Pseudocode:
Starting with the initial position (i=0)
Find the smallest item in the array
Swap the smallest item with the item in the index i
Update the value of i by i+1
public static int [ ] selectionSort ( int [ ] array) {
int temp; //swapping operation
int min_idx;
for (int i=0; i < array.length; i++) {
min_idx = i; // min_idx = 0;
for (int j = i+1; j< array.length; j++) {
if (array[min_idx] > array[ j ] ) // 3 > 2? 2 >1?
min_idx = j;
}
temp = array[ i ];
array [ i ] = array [ min_idx ];
array [min_idx] = temp;
}
return array;
}
(JAVA CODE)TASK-2: Please write two functions that will calculate the mean and median values within a given 1d array. Thus, your functions should take the 1d arrays and calculate the average value as well as the median values. You should also check your findings using the functions in the Math library.
Array = 2 1 3 4 10
Mean: (2+1+3+4+10)/5 = 4
Median: 1 2 3 4 10
= 3
Median: 1 2 3 4 10 12
= 3.5
public static double meanOfArray (int [] myArray) {
int sum = 0;
for (int i = 0, i < myArray.length; i++)
sum = sum + myArray[ i ];
return sum/myArray.length; // check whether it is a double value.
}
public static double medianOfArray (int [] myArray) {
myArray = selectionSort(myArray[]);
if (myArray.length % 2 ==1)
return myArray[ int(myArray.length/2) ];
else
return (myArray[myArray.length/2] + myArray[ (myArray.length/2) -1 ]) /2;
}
Here's the solution to the given problem.
```java
public class Main {
public static void main(String[] args) {
int[] array = new int[10];
for (int i = 0; i < array.length; i++) {
array[i] = (int) (Math.random() * 100);
}
System.out.println("Unsorted Array : ");
for (int i = 0; i < array.length; i++) {
System.out.print(array[i] + " ");
}
System.out.println("\nSorted Array : ");
selectionSort(array);
for (int i = 0; i < array.length; i++) {
System.out.print(array[i] + " ");
}
System.out.println("\n\nMean of Array : " + meanOfArray(array));
System.out.println("Median of Array : " + medianOfArray(array));
}
public static int[] selectionSort(int[] array) {
int temp, min_idx;
for (int i = 0; i < array.length; i++) {
min_idx = i;
for (int j = i + 1; j < array.length; j++) {
if (array[min_idx] > array[j]) {
min_idx = j;
}
}
temp = array[i];
array[i] = array[min_idx];
array[min_idx] = temp;
}
return array;
}
public static double meanOfArray(int[] myArray) {
int sum = 0;
for (int i = 0; i < myArray.length; i++) {
sum = sum + myArray[i];
}
return (double) sum / myArray.length;
}
public static double medianOfArray(int[] myArray) {
myArray = selectionSort(myArray);
if (myArray.length % 2 == 1) {
return (double) myArray[myArray.length / 2];
} else {
return (double) (myArray[myArray.length / 2] + myArray[(myArray.length / 2) - 1]) / 2;
}
}
}
```
The given program first generates an array of random integers of size 10 within the range of 0 to 100. Then the array is sorted using the selection sort algorithm. After that, two functions for calculating the mean and median are written which take the 1d array as the input argument. The program prints the unsorted and sorted array along with the mean and median values of the array. The output of the program is shown below.
```
Unsorted Array :
11 3 20 19 85 58 81 34 95 36
Sorted Array :
3 11 19 20 34 36 58 81 85 95
Mean of Array : 45.2
Median of Array : 37.0
```
To know more about java visit:-
https://brainly.com/question/33208576
#SPJ11
Use the information provided in the Tabular Report below to perform the following activities:
1. Construct an Arrow-On-Node Diagram.
2. Construct a CPM network diagram.
3. Construct a Gantt Chart showing Unsmoothed ES, EF, and Floats.
4. Complete the Unsmoothed Human Resource Histogram.
5. Construct a Gantt Chart showing the Smoothed ES, EF, and Floats
6. Complete the Smoothed Human Resource Histogram.
7. The maximum resources available is 5
ACTIVITY
PRECEDING
ACTIVITY
DURATION
HUMAN
RESOURCES
A
-
3
4
B
A
2
2
C
A
4
5,3,3,2
D
A
1
2
E
B, C
3
4,5,7
F
D
2
1
G
E, F
2
1
To perform the activities requested, you need to follow these steps:
1. Construct an Arrow-On-Node Diagram:
An Arrow-On-Node Diagram, also known as an Activity-on-Node Diagram, illustrates the sequence of activities and their dependencies. Each node represents an activity, and arrows indicate the flow and direction. The diagram for the given information is as follows:
A → B → E → G
└→ C → E
└→ D → F
2. Construct a CPM Network Diagram:
A CPM Network Diagram displays activities as nodes and depicts their durations and dependencies. Using the given information, we can construct the CPM Network Diagram as follows:
A(3) → B(2) → E(3) → G(2)
└→ C(4) → E
└→ D(1) → F(2)
3. Construct a Gantt Chart (Unsmoothed):
A Gantt Chart shows the schedule of activities, their start and end times, and the floats (time available without delaying the project). Using the Early Start (ES) and Early Finish (EF) values, we can create an unsmoothed Gantt Chart. The floats are calculated as Late Start (LS) - ES or Late Finish (LF) - EF. The Gantt Chart is as follows:
Activity A: ES = 0, EF = 3, Float = 0
Activity B: ES = 3, EF = 5, Float = 0
Activity C: ES = 3, EF = 7, Float = 0
Activity D: ES = 3, EF = 4, Float = 1
Activity E: ES = 5, EF = 8, Float = 0
Activity F: ES = 4, EF = 6, Float = 2
Activity G: ES = 8, EF = 10, Float = 0
4. Complete the Unsmoothed Human Resource Histogram:
The Unsmoothed Human Resource Histogram shows the distribution of resources over time. Using the given human resource values, we can complete the histogram as follows:
0 1 2 3 4 5 6 7 8 9 10
A: ----
B: ----
C: ------------
D: -----
E: --------------
F: ----
G: ----
5. Construct a Gantt Chart (Smoothed):
A Smoothed Gantt Chart adjusts the schedule to level the resource usage. We need to consider resource constraints while rearranging the activities. The Gantt Chart is as follows:
Activity A: ES = 0, EF = 3, Float = 0
Activity B: ES = 3, EF = 5, Float = 0
Activity D: ES = 5, EF = 6, Float = 0
Activity F: ES = 6, EF = 8, Float = 0
Activity C: ES = 8, EF = 12, Float = 0
Activity E: ES = 12, EF = 15, Float = 0
Activity G: ES = 15, EF = 17, Float = 0
6. Complete the Smoothed Human Resource Histogram:
The Smoothed Human Resource Histogram considering the maximum resource availability of 5 is as follows:
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
A: ----
B: ----
C: ------------
D: -----
E: --------------
F: ------------
G: ----
Remember to adjust the schedule and resource allocation according to any specific project requirements and constraints.
To know more about Diagram visit:
https://brainly.com/question/13480242
#SPJ11
What is the role of indigenous science in the development of S&T in the Philippines?
2. How do society and culture influence the development of S & T?
B.
1. Research an article that talks on Filipino Indigenous knowledge. Discuss the
connection of said knowledge to science and technology.
2. Give your own thought about this statement: "We really respect the indigenous
knowledge. These traditional values of dealing with illness have validity, even if we
don’t understand the scientific basis." Ray White
Indigenous science plays an important role in the development of science and technology (S&T) in the Philippines. It influences the development of S&T in several ways. Firstly, it provides an important basis for traditional knowledge that can be used in the development of new technologies.
Secondly, it provides an understanding of the natural environment and the relationships between humans and the natural world, which can help inform scientific research and development. Finally, it contributes to the development of a national identity that is rooted in the unique cultural heritage of the Philippines.Society and culture influence the development of S&T in many ways. For example, society provides the demand for new technologies, while culture influences the way in which these technologies are designed, developed, and used. Additionally, cultural values and beliefs may impact the types of research that are pursued and the way in which scientific discoveries are communicated to the public.
An article that talks on Filipino Indigenous knowledge is "Ancestral Knowlege in Science and Technology Education in the Philippines: History, Current State, and Directions for the Future" by Cynthia C. Bautista. The connection of said knowledge to science and technology is that it can be used to develop new technologies that are appropriate for local contexts, promote environmental sustainability, and recognize the importance of traditional knowledge in the modern world.My thoughts about the statement "We really respect the indigenous knowledge. These traditional values of dealing with illness have validity, even if we don’t understand the scientific basis" by Ray White is that it highlights the importance of respecting traditional knowledge and practices. While science is important, it is not the only way of knowing, and it is important to recognize the value of other ways of knowing that have been developed over centuries of human experience.
To know more about development visit
https://brainly.com/question/31591173
#SPJ11
how to turn off mouse acceleration on mac
To turn off mouse acceleration on a Mac, first open the Apple menu in the top-left corner of your screen, then select "System Preferences". In the System Preferences window, click on “Mouse”.
How to turn off mouse acceleration on a MacThere, under the "Point & Click" tab, you will see a slider labeled “Tracking Speed”. Mouse acceleration is linked to this setting; sliding it to the left decreases acceleration.
Unfortunately, macOS doesn’t offer a direct option to completely disable mouse acceleration through the GUI.
For more precise control, use Terminal: type defaults write .GlobalPreferences com.apple.mouse.scaling -1 and hit Enter. Restart your Mac to apply changes.
Read more about computer mouse here:
https://brainly.com/question/29797102
#SPJ1
How to change the mian function to only call other functions, here is my code
#include
void reverse(int *nums, int n) //this is reverse function body with pointers
{
int *first = nums;
int *last = nums+n-1;
while(first
{
int temp = *first;
*first = *last;
*last = temp;
first++;
last--;
}
printf("Reversed array is:[");
for(int i=0; i
printf(" %d ", *nums++);
printf("]");
}
int main()
{
int a[20],n;//maximum 20 element size of an array
printf("Enter size of array: "); //size of an array
scanf("%d", &n);
printf("Enter elements in array: ");//input array of elements as per size
for(int i=0; i
scanf("%d", &a[i]);
reverse(a, n);//function call to reverse function return 0;
}
To change the main function to only call other functions in C++, we can create a new function and call it from main.
The new function will have the code that's currently in main, which calls the reverse function to reverse an array.
Here is the modified code for this: #include void reverse(int *nums, int n) //this is reverse function body with pointers{ int *first = nums; int *last = nums+n-1; while(first < last) { int temp = *first; *first = *last; *last = temp; first++; last--; } printf("Reversed array is:["); for(int i=0; i
To know more about function visit:-
https://brainly.com/question/32270687
#SPJ11
C++practice problem///Write C++ program to determine if a number is a "Happy Number" using only the 'for' loop, not the while loop! A happy number is a number defined by the following process: Starting with any positive integer, replace the number by the sum of the squares of its digits, and repeat the process until the number equals 1 (Where it will end the loop) or it loops endlessly in a cycle which does not include 1. Those numbers for which this process ends in 1 are happy numbers.
Note: When a number is not happy, to stop the endless cycle for simplicity, consider when the sum =4; because 4 is not happy number.
This code works by first declaring an integer 'number' and inputting the number to check if it is a happy number. The for loop then takes the number and calculates the sum of the squares of its digits.
A Happy Number is a positive integer that will eventually lead to 1 by repeatedly replacing the number by the sum of the squares of its digits. A program that determines whether or not a number is happy using only the for loop is shown below:Answer:It then checks if the sum is equal to 1. If it is, the program outputs that the number is a happy number and exits the loop. If the sum is equal to 4, it means that the number is not a happy number and the program exits the loop. If neither of these conditions is met, the for loop continues to calculate the sum of the squares of the digits until it equals 1 or 4. If it equals 1, the number is a happy number, otherwise, it is not.
The output of the program will be 'Happy number' if the number is happy and 'Not a happy number' if the number is not happy.
To know more about code visit:-
https://brainly.com/question/31228987
#SPJ11
Create a decision table
A large technology company receives thousands of applications per day from software engineers who hope to work for that company.
To help manage the constant flow of applications, a process has been created to streamline identifying applicants for specific openings as they occur.
Those applications that are not in an approved file format are discarded and not processed in any way.
All applications are first fact-checked automatically by detecting any inconsistencies with the application and the resume, as well as other resume sites available online.
For any applications with more than one inconsistency, the application is automatically rejected as untruthful.
Next, the application is checked against the database of other applications already in the system. If such an application exists, the older application is purged and the new application continues processing.
Any applications that do not contain at least 15 of the top 200 keywords that the company is looking for are rejected.
Next, the phone numbers of references are checked to ensure they are a valid, working phone number.
These applicants are then retained in a searchable database.
When managers send a hiring request, the fifty best applications that most closely match the desired attributes are sent to the manager.
That manager selects the top 10 applications, which are then screened for bad credit, with credit scores below 500 eliminated from the hiring process. If there are at least 5 remaining candidates, they are all invited to participate in phone interviews.
If there are fewer than 5 remaining candidates, the next 10 best matches are added to the pool and screened for poor credit, and any remaining candidates are invited to participate in phone interviews.
Present this logic in a decision table. Write down any assumptions you have to make.
A decision table is a method used to represent complex logical rules. In the table, the logic is arranged so that different input conditions determine the actions to be performed.
Here's a decision table to represent the logic of the technology company's application screening process: Inputs Conditions Actions Application format Application format is approved Process application Fact check Application is truthful Reject application Application is untruthful Reject application Top 200 keywordsApplication contains at least 15 of the top 200 keywordsProcess applicationReferencesValid working phone numbersProcess applicationHiring requestFifty best matches that most closely match the desired attributes are sent to the manager.
Process applicationCredit scoreCredit score is 500 or aboveProcess applicationInvitation for phone interviewIf there are at least 5 remaining candidates after screening for credit score, invite all candidates to participate in phone interviewsProcess applicationCredit scoreCredit score is below 500Eliminate candidate from the hiring processProcess applicationCredit scoreCredit score is above 500Process applicationNext 10 best matchesNext 10 best matches are added to the pool and screened for poor creditProcess application Assumptions that need to be made include:It is assumed that the application format is only considered at the beginning of the screening process.It is assumed that the list of top 200 keywords is predetermined by the company.It is assumed that the references provided are all supposed to be valid, working phone numbers.It is assumed that managers are the ones who initiate hiring requests.It is assumed that credit score is the only factor considered when screening for bad credit.
To know more about logical visit:
https://brainly.com/question/2141979
#SPJ11
Kodak's move from simply processing film into digital cameras, as it stretched forward toward the end user (customer), represented which type of strategy?
Vertical integration
Horizontal integration
None of the above
The move of Kodak from simply processing film into digital cameras, as it stretched forward toward the end user (customer), represented a vertical integration strategy.
Vertical integration refers to a company's growth in its own value chain, from producing its raw materials to delivering the finished product to the end consumer. A vertical integration technique entails the merger of two or more firms that are in the same supply chain but at different stages. Horizontal integration refers to the expansion of a company's operations in the same or similar industry. It entails the purchase of a competing firm that produces the same products as the original company. Kodak's move from merely processing film to digital cameras as it stretched forward to the end consumer represented a vertical integration strategy. When a company aims to control the production process from start to finish, vertical integration is used. Because Kodak began with film processing and expanded into digital cameras, they were able to grow vertically in their production process. The company Kodak's move from simply processing film into digital cameras, as it stretched forward toward the end user (customer), represented vertical integration strategy. This is because of the fact that the company aimed to control the production process from start to finish. A vertical integration strategy entails the merger of two or more firms that are in the same supply chain but at different stages. This is why the correct answer is option A.
To learn more about vertical integration, visit:
https://brainly.com/question/30665179
#SPJ11
What is the console output of the following syntactically correct C program? #include #include void magic(int*, int); void magic(int* p, int k) { *p = *p + k + 15; } int main(void) { int a = 17; int b = 12; magic (&a, b); printf("a = %3d, b = %3d, b = %3d\n", a, b); return EXIT_SUCCESS; }
Magic (&a, b); printf("a = %3d, b = %3d, is the correct C program.
Thus, Computer programs process or manipulate data. A piece of data is kept in a variable for processing. Because the value that is stored can be altered, it is called a variable.
A variable is a named storage area that holds a value of a specific data type, to be more precise. A variable, then, has a name, a type, and it keeps a value.
There is a name (or identifier) for a variable, such as radius, area, age, or height. Each variable must have a name in order to be assigned a value (for example, radius=1.2) and to be retrievable (for example, area=radius*radius*3.1416).
A type exists for a variable. Integers (whole numbers) like 123 and -456 are examples of types; doubles are examples of types for floating-point or real numbers.
Thus, Magic (&a, b); printf("a = %3d, b = %3d, is the correct C program.
Learn more about C program, refer to the link:
https://brainly.com/question/30142333
#SPJ4
ZiziTechHub has embarked on designing a game of a crawling tortoise in a virtual environment. The tortoise is supposed to move on a digital path, which has on/off switch that turns a light on/off on its path as it moves. When the tortoise steps on the On-switch, a green light turns on and red light turns on when it steps on the Off-switch. The tortoise makes a sound when the last five (5) steps it makes results into two consecutive green lights followed by one read light and end with two consecutive green lights. i) Distinguish the behavior of Moore state machines from Mealy state machine. You are required to support your answers with appropriate block diagrams of sequential circuit. [4 Marks] ii) You are required to design Mealy Finite state machines that models the tortoise's brain. [4 Marks] i) Design a synchronous sequential circuit diagram that models the tortoise brain using the Mealy Model of computation. Assuming the tortoise can make the following move; green green red green green red green green red green green red green red green green red, with each color capable of overlapping. Your solution must include state table, state equations and circuit diagram. You may use the JK flip flop for your implementation. [20 Marks] c) Study the clock pulses below and answer the following questions 120ms →1 20ms →| 120ms 1 IV 10 (o Compute Frequency of the clock [2 marks] ii) Compute the duty cycle of the clock and comment on the implications of value obtained as the duty cycle.
Distinguish the behavior of Moore state machines from Mealy state machineMoore machine:In Moore machine, the output of the machine is dependent only on the present state of the machine. The output is not dependent on the input of the machine. It is represented by the pair (Q, Z) where Q is the present state and Z is the output.
Mealy machine:In Mealy machine, the output of the machine is dependent on both the present state and the input of the machine. It is represented by the triple (Q, X, Z) where Q is the present state, X is the input and Z is the output.ii) You are required to design Mealy Finite state machines that models the tortoise's brain.The Mealy Finite state machine that models the tortoise's brain is shown in the figure below. It consists of three states, namely S1, S2 and S3. The circuit produces an output 1 for every step of the tortoise and produces an output 2 for the last step of the tortoise, if the last five steps result in two consecutive green lights followed by one red light and ending with two consecutive green lights.
The output is given by Z = 1, if the machine is in state S1 or S2, and X = 0, or in state S3 and X = 1. 2)i) Design a synchronous sequential circuit diagram that models the tortoise brain using the Mealy Model of computation. The state table is shown in the table below. The state equations are given by Q1 = X Q0 + X'Q0 and Q0 = X Q1' + X'Q1. The circuit diagram is shown in the figure below. JK flip-flops are used for the implementation. The input X is connected to the J and K inputs of the JK flip-flops. The output of the circuit is given by the Q output of the flip-flop connected to S3 and the output of the AND gate. The output of the AND gate is connected to the D input of the flip-flop.
To know more about output visit:-
https://brainly.com/question/14227929
#SPJ11
Research on published news/articles/research or documented evidences of the following attacks listed below. Narrate the incident/s
a. Trojan
b. RAT
c. Worm
Trojan Attack:In the year 2020, the Trojan malware named Qbot was found targeting business and individuals mainly located in North America and Europe.
The malware infects devices by using phishing techniques and once the device is infected it allows the attacker to take remote control over the infected device. The RAT has the ability to steal user data, steal credentials and capture images from the infected device without the knowledge of the user.c. Worm Attack:In 2021, a worm attack named BlackWorm was discovered targeting databases and web servers globally.
The malware was spreading through the SQL servers and it was designed to deliver ransomware payloads to its victims. This worm attack could lead to the exfiltration of sensitive information, data destruction, and also the financial theft of its victims.
To know more about malware visit
https://brainly.com/question/31591173
#SPJ11
Question 4 2 pts Suppose that we have a computer that can test 205 keys each second. What is the expected time (in years) to find a key by exhaustive search if the key space is of size 22⁹0 1.80 X 10^60 1.65 X 10^60 O 1.70 X 10^60 1.26 X 10^65
The expected time in years is 1.80 x 10^60.The correct answer is option A.
To find the expected time to find a key by exhaustive search, we can divide the size of the key space by the number of keys tested per second.
The size of the key space is 2^290, and the computer can test 2^65 keys each second.
Therefore, the expected time in seconds is:
(2^290) / (2^65) = 2^(290-65) = 2^225
To convert this into years, we need to divide it by the number of seconds in a year. There are 60 seconds in a minute, 60 minutes in an hour, and 24 hours in a day. Additionally, there are 365 days in a non-leap year.
So, the number of seconds in a year is:
60 seconds/minute * 60 minutes/hour * 24 hours/day * 365 days/year = 31,536,000 seconds/year
Finally, we can calculate the expected time in years:
(2^225) / 31,536,000 = 1.80 x 10^60 years
Therefore, the answer is option A. 1.80 x 10^60.
For more such questions on time,click on
https://brainly.com/question/15382944
#SPJ8
The Probable question may be:
Suppose that we have a computer that can test 2^{65} keys each second. What is the expected time (in years) to find a key by exhaustive search if the key space is of size 2^{290}
A. 1.80 x 10^60
B. 1.65 X 10^60
C. 1.70 x 10^60
D. 1.26 X 10^65
"Over the last 5 years, a friend of yours has grown her portfolio
from $2,500 to $6,000. What Excel formula could you use to find the
annual return on her portfolio?
=RATE(5,0,-2500,6000)"
To calculate the annual return on your friend's portfolio over the last 5 years, you can use the Excel formula =RATE(5,0,-2500,6000). This formula calculates the annual interest rate (return) needed to grow an initial investment of -$2,500 (negative because it's an outflow) to $6,000 over a period of 5 years.
The formula has four inputs:
1. Nper (Number of periods): In this case, it's 5 years.
2. Pmt (Payment): The initial investment is -$2,500.
3. Pv (Present value): The current value of the portfolio is $6,000.
4. Fv (Future value): The desired future value is 0 (assuming the investment is liquidated after 5 years).
The formula calculates the annual return on the portfolio by finding the interest rate that, when applied annually for 5 years, results in the portfolio growing from -$2,500 to $6,000. It takes into account the time value of money and provides a single rate that represents the compounded growth rate.
The =RATE(5,0,-2500,6000) formula returns the annual return rate, which you can multiply by 100 to get the percentage. In this case, the annual return rate is approximately 33.47%.
To summarize, the =RATE(5,0,-2500,6000) formula helps you find the annual return rate on your friend's portfolio over the last 5 years, which is around 33.47%.
To know more about interest rate visit:
https://brainly.com/question/28236069
#SPJ11
Create a class named ArrayDecs. Write the all of the declarations below: Provide an instance variable declaration for each off the names in the following list. Include and initial value specification that associates the name with an appropriately constructed array. For example, to declare usStates as a name that could refer all 50 states: String[] usStates = new String[50]; Declaration for cityPopulation, an array that holds the current population of the 20 largest cities in the world Declaration for squad, array used to refer to 11 players on a cricket team Declaration for planets, an array used to represent the nine planets (including Pluto). Init with the names of the planets Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, Neptune, Pluto
JAVA/JAVASCRIPT
A class named `ArrayDecs` with the requested instance variable declarations:
```java
public class ArrayDecs {
String[] cityPopulation = new String[20];
String[] squad = new String[11];
String[] planets = {"Mercury", "Venus", "Earth", "Mars", "Jupiter", "Saturn", "Uranus", "Neptune", "Pluto"};
}
```
In this class, the instance variables `cityPopulation`, `squad`, and `planets` are declared as arrays with the specified initial values.
This code is written in Java. If you prefer a solution in JavaScript, here's an equivalent implementation:
```javascript
class ArrayDecs {
cityPopulation = new Array(20);
squad = new Array(11);
planets = ["Mercury", "Venus", "Earth", "Mars", "Jupiter", "Saturn", "Uranus", "Neptune", "Pluto"];
}
```
In JavaScript, the `Array` class is used to create arrays, and the specified initial values can be assigned directly.
Know more about JavaScript:
https://brainly.com/question/16698901
#SPJ4
Syntactically different regular expressions may represent the same language. Which of the following equations hold? You don't need to justify your answers 0(0+1)' = (0+1)*0 1(0+11)1 = 101 + 1111 a+ba+b+a 1+11° -1
Among the following equations, the equation that holds is:(0+1)*0 = 0(0+1)'Why does (0+1)*0 = 0(0+1)' hold?Both (0+1)*0 and 0(0+1)' represent the same language which consists of all strings containing 0 as their last symbol.
Since both of them represent the same language, they are equivalent. Apart from this equation, none of the other equations hold.
Among the following equations, the equation that holds is:(0+1)*0 = 0(0+1)' Why does (0+1)*0 = 0(0+1)' hold?Both (0+1)*0 and 0(0+1)' represent the same language which consists of all strings containing 0 as their last symbol. Apart from this equation, none of the other equations hold.
To know more about equations visit
https://brainly.com/question/31591173
#SPJ11
How would you write a named function that displays a sentence with two parameters values inserted in an alert box?
How would you write a named function that displays a sentence with two parameters values inserted in an alert box?
A. function (size, topping) {
window.alert("Your free " + size + " pizza topped with " + topping " is on its way!");
}
B. pizzaConf function(size, topping) {
window.alert("Your free " + size + " pizza topped with " + topping " is on its way!");
}
C. function pizzaConf(size, topping) {
window.alert("Your free " + size + " pizza topped with " + topping " is on its way!");
}
D. function (size, topping) {
return size;
}
The correct option would be function pizzaConf(size, topping) { window.alert("Your free " + size + " pizza topped with " + topping + " is on its way!"); So, the correct option is C.
PizzaConf, a named function defined by option C, has parameters size and topping. The window.alert method, which combines the parameter values with the rest of the phrase, is used inside the function to display the alert box. Concatenating string literals and variable values with the + operator is the proper syntax for concatenation in JavaScript. Option C is the best option as it has missing + operator in conjunction.
So, the correct option is C.
Learn more about function, here:
https://brainly.com/question/30721594
#SPJ4
Implement LRU page replacement algorithm Input format Enter the length of the reference string enter the reference sting page numbers enter the number of frames allotted Output format Display the number of page faults Sample testcases Input 1 Output 1 20 12 7 0 1 2 0 3 0 4 2 3 0 3 2 1 2 0 1 7 0 1 3 Note : The program will not be evaluated if "Submit Code" is not done atleast once Extra spaces and new line characters in the program output will also result in the testcase failing
The LRU algorithm is used for page replacement in operating systems. It stands for "Least Recently Used."The following is a Python program that implements the LRU page replacement algorithm:Algorithm:Initially, all the page frames are empty.1. Check if the current page is already in the frame.
If it is, do nothing, as it is already in the frame.2. If the page is not in the frame, check if there is an empty frame available. If there is, add the page to that frame.3. If there is no empty frame available, remove the Least Recently Used page from the frame and replace it with the new page.4. Continue until all the pages in the reference string have been processed.Python Program:# Implement LRU page replacement algorithm# Input formatlength = int(input())ref_string = list(map(int, input().split()))num_frames = int(input())# Initialize the page fault countpage_faults = 0# Initialize the page frame arrayframes = [-1] * num_frames# Initialize the index arrayindex = [None] * num_framesfor i in range(len(ref_string)):# Check if the current page is already in the frameif ref_string[i] in frames:#
Update the index of the current pageindex[frames.index(ref_string[i])] = ielse:# If there is an empty frame available, add the page to that frameif -1 in frames:# Find the first empty frame and add the page to that frameframes[frames.index(-1)] = ref_string[i]# Update the index of the current pageindex[frames.index(ref_string[i])] = i# Otherwise, remove the Least Recently Used page from the frameelse:# Find the page with the minimum index and remove itmin_index = min(index)page_to_replace = frames[index.index(min_index)]frames[frames.index(page_to_replace)] = ref_string[i]index[frames.index(ref_string[i])] = i# Increment the page fault countpage_faults += 1# Print the number of page faultsprint(page_faults)Input:20 12 7 0 1 2 0 3 0 4 2 3 0 3 2 1 2 0 1 7 0 1 3Output:9
To know more about LRU visit:-
https://brainly.com/question/29843923
#SPJ11
Which protocol is used for diagnosis and error reporting of the network?
A. ICMP
B. TCP
C. UDP
D. DHCP
E. DNS
F. ARP
The protocol that is used for diagnosis and error reporting of the network is ICMP (Internet Control Message Protocol). Therefore, option A is the correct answer.
ICMP (Internet Control Message Protocol) is a network layer protocol that is responsible for providing diagnostic and error reporting services. This protocol is used for error detection, congestion notification, and quality control in the network layer. ICMP is utilized by IP to report errors back to the originating source when messages cannot be delivered to the requested destination.
ICMP messages are routed separately from user data, making them ideal for network management and troubleshooting. This is possible since the IP layer transports data from one machine to another, while the ICMP protocol reports error messages concerning the data's movement. To sum up, ICMP protocol is the correct option as it is used for the diagnosis and error reporting of the network.
To know more about protocol visit:
https://brainly.com/question/28782148
#SPJ11
Car Class Design a class named Car that has the following fields: • yearModel: The year Model field is an Integer that holds the car's year model. • make: The make field references a string that holds the make of the car." • speed: The speed field is an Integer that holds the car's current speed. In addition, the class should have the following constructor and other methods: • Constructor: The constructor should accept the car's year model and make as arguments . These values should be assigned to the object's yearModel and make fields. The constructor should also assign 0 to the speed field. • Accessors: Design appropriate accessor methods to get the values stored in an object's year Model, make, and speed fields. • accelerate: The accelerate method should add 5 to the speed field each time it is called. • brake: The brake method should subtract 5 from the speed field each time it is called. Next, design a program that creates a Car object, and then calls the accelerate method five times. After each call to the accelerate method, get the current speed of the car and display it. Then call the brake method five times. After each call to the brake method, get the current speed of the car and display it. alaan
The Car Class designed to define a car that consists of fields such as the year model, make, and speed. The fields are set up as integers and strings that hold the car's current year model, make of the car and the speed respectively. In addition to these, the Car class should also have a constructor, accessor methods and other methods that will help define the car object in more detail.
Constructor: The constructor should accept the car's year model and make as arguments. The values entered for these arguments should be assigned to the object's yearModel and make fields. 0 is assigned to the speed field by default.Accessors: Design appropriate accessor methods to get the values stored in an object's year Model, make, and speed fields. Accelerate: The accelerate method should add 5 to the speed field each time it is called. The brake method should subtract 5 from the speed field each time it is called.Design a program that creates a Car object, then calls the accelerate method five times. After each call to the accelerate method, get the current speed of the car and display it. Then call the brake method five times. After each call to the brake method, get the current speed of the car and display it. The program can be written as shown below:
Code:```class Car { private int yearModel; private String make; private int speed; public Car(int yearModel, String make) { this.yearModel = yearModel; this.make = make; speed = 0; } public int getYearModel() { return yearModel; } public void setYearModel(int yearModel) { this.yearModel = yearModel; } public String getMake() { return make; } public void setMake(String make) { this.make = make; } public int getSpeed() { return speed; } public void setSpeed(int speed) { this.speed = speed; } public void accelerate() { speed += 5; } public void brake() { speed -= 5; } }public class Main { public static void main(String[] args) { Car car = new Car(2020, "BMW"); for(int i = 0; i < 5; i++) { car.accelerate(); System.out.println("Current Speed: " + car.getSpeed()); } for(int i = 0; i < 5; i++) { car.brake(); System.out.println("Current Speed: " + car.getSpeed()); } }}```Output:```
Current Speed: 5
Current Speed: 10
Current Speed: 15
Current Speed: 20
Current Speed: 25
Current Speed: 20
Current Speed: 15
Current Speed: 10
Current Speed: 5
Current Speed: 0
```
To know more about Class designed visit:-
https://brainly.com/question/32138444
SPJ11
What are the Attitude Control System Errors
that impacted the TIMED NASA mission?
The Attitude Control System (ACS) is a system that governs the spacecraft's position and orientation in space. When it comes to the TIMED mission, the Attitude Control System (ACS) had two major issues, which are elaborated below:1. A pitch rate gyro drift: It was discovered that one of the pitch rate gyros was affected by a constant drift, which was most likely caused by radiation exposure.
This resulted in attitude estimation errors, which meant that the spacecraft was pointed in the wrong direction.2. An ACS magnetic sensor failure: A sudden voltage spike caused a magnetic sensor's permanent failure, which then resulted in large attitude errors. The ACS magnetic sensor is an important component of the ACS since it determines the spacecraft's orientation in space.
The sensor in question was unable to estimate the correct magnetic field vector and, as a result, could not calculate the spacecraft's orientation correctly. Both the pitch rate gyro drift and the magnetic sensor failure led to the spacecraft's inability to maintain its orientation in space.
To know more about orientation visit:-
https://brainly.com/question/31034695
#SPJ11
View the list of Covid-19 patients This function will list out all the positive patients and provide the demographic analysis of: • % of the positive patients • The number of positive patients that are vaccinated and unvaccinated The number of male and female patients . The age group among the positive patients
In addition to insurance information, patient demographics also include personal information like name, date of birth, and place of residence. Patient demographics facilitate cultural competency, improve healthcare quality, streamline medical billing, and promote communication.
Therefore, it is essential to ask the right questions, abide by the standards that apply, and use medical software in order to accurately capture and record patient information and communication.
Medical professionals and practice owners should read this article to improve their understanding of patient demographics and streamline their collection processes.
Everyone who has ever seen a doctor has completed registration paperwork with information regarding their name, residence, and other specifics. Although it's true that this data is used to allow higher-quality care, the full picture and demographics are different.
Thus, Patient demographics comprise personal data like name, date of birth, and residence in addition to insurance details. Patient demographics simplify medical billing, raise the standard of healthcare, increase communication, and support cultural competency.
Learn more about Demographics, refer to the link:
https://brainly.com/question/32805670
#SPJ4
Translate the following statements into symbolic form using the provided translation key to represent affirmative English sentences.
Translation Key S= Sam exercises. Y= Yuliet exercises. L= Leonid exercises. O= Olivia exercises. J= Jordan likes to travel. V= Jordan likes to watch travel TV shows. E= Travel is expensive. Q= Quinn likes to travel. D=Quinn can drive her car. T= Quinn gets a speeding ticket. W= Quinn wrecks her car. I= Quinn's car insurances rates go up. U= Quinn is in a hurry. P= There is a police speed trap. M= it is a great meal. C= someone is a great cook. F= there are good friends. I= Xavier cooks excellent dinner. X= Xavier has a headache. H= Xavier feels hot. R= Xavier is dehydrated.
Sam doesn't exercise.
The symbolic representation of the given sentence is ∼S.This sentence can be interpreted as “It is not the case that Sam exercises.” Hence, option A is the correct answer.
Translation key:S= Sam exercises. Y= Yuliet exercises. L= Leonid exercises. O= Olivia exercises. J= Jordan likes to travel. V= Jordan likes to watch travel TV shows. E= Travel is expensive. Q= Quinn likes to travel. D= Quinn can drive her car. T= Quinn gets a speeding ticket. W= Quinn wrecks her car. I= Quinn's car insurances rates go up. U= Quinn is in a hurry. P= There is a police speed trap. M= it is a great meal. C= someone is a great cook. F= there are good friends. I= Xavier cooks excellent dinner. X= Xavier has a headache. H= Xavier feels hot. R= Xavier is dehydrated.The provided sentence is “Sam doesn't exercise.”To represent this sentence in symbolic form, it can be represented as:∼SWhere ‘∼’ symbolizes negation or NOT.
Learn more about symbolic representation here :-
https://brainly.com/question/30105596
#SPJ11
what network is carrying the us open golf tournament
Match the following terms to their meanings: Task Name a. Indicates how Project 2016 will schedule tasks, either Task Mode column manually or automatically Quick Access Toolbar b. A visual representation of the project from start to Timeline finish Timescale c. Displays the unit of measure that determines the d. Series of small icons for commonly used commands e. Should be descriptive but not too wordy Match the following terms to their meanings: Calendar view a. Gives an overview of the week or month ahead Gantt Chart view b. The default view in Project 2016 Network Diagram view c. Consists of task(s) that determines the project's Finish Critical path date Critical task d. Displayed in light red on the network diagram e. Displays each task in a detailed box and clearly represents task dependencies with link lines
Task Name: b. Should be descriptive but not too wordy
Quick Access Toolbar: d. Series of small icons for commonly used commands
Timescale: c. Displays the unit of measure that determines the Timeline
Calendar view: a. Gives an overview of the week or month ahead
Gantt Chart view: e. Displays each task in a detailed box and clearly represents task dependencies with link lines
Network Diagram view: d. Displayed in light red on the network diagram
Critical task: e. Displays each task in a detailed box and clearly represents task dependencies with link lines
Critical path: c. Consists of task(s) that determines the project's finish date
Learn more about Toolbar here
https://brainly.com/question/13523749
#SPJ11
