A flywheel is rotating at 30 rev/s. What is the total angle, in radians, through which a point on the flywheel rotates in 40 s?

Last one!

Perpendicular to the wave's energy

Hope this helps!

Answer:

The absorption lines will shift to the red (become longer).

This is because of the extra distance that a wavelength λ must travel between the vibrations of the source producing the spectrum.

Note that the Doppler effect of the source is slightly different for light waves than it is for sound waves because sound waves require a medium in which to travel while light waves do not require such a medium (example air).

During arm elevation, the motion of the scapula moves is an upward rotation motion.

The scapula otherwise known as the shoulder blade is a bone found in the upper limb and forms part of the shoulder and the back.

They are triangular in shape.

The scapula enables movement of the shoulder and the arm in about six ways.

During arm elevation, the motion of the scapula moves is an upward rotation motion: protraction, retraction, elevation, depression, upward rotation, and downward rotation.

Learn more about scapula at: https://brainly.com/question/12926652

#SPJ12

Answer:

no way to tell since the ocean surface is moving too violently it's not possible to determine the reflected angle

If all the wires have the same diameter, they will all stretch by the same percent. The elasticity does not depend upon the length.

Distance is a numerical representation of the distance between two locations. The distance can refer to a physical length or an estimate based on other factors in physics or common use.

|AB| is a symbol for the distance between two points A and B.

A physiological method for identifying far-off or unseen items using sound waves that the objects reflect back to the source, such as a bat. Each one will enlarge by the same percentage.

Hence, they will all stretch by the same percentage.

To learn more about the distance refer to the link;

https://brainly.com/question/26711747

#SPJ5

Explanation:

vertical force = 460,000 * sin(70) - 300,000

Fv = 187,717.75N

Answer:

4 m/s²

Explanation:

v = v₀ + at

80 = 0 + 20a

80 = 20a

a = 4 m/s²

Answer:

3 meters

Explanation:

Velocity = displacement/time

Displacement=velocity×time

As, time from 7 to 8 is 1 sec. And velocity increases from 0 to 3 m/s

So, Displacement = 3×1

=3m

Please give me brainlist.

Answer:

Forces do not have a specific direction.

In permanent waving, the size of the curl should be determined based on the size of the rod.

Permanent waving can be defined as a hairstyle that is typically made by setting a person's hair in waves or curls while treating it with chemical solutions such as thio, so as to make it last for a long period of time.

In permanent waving, the size of the curl should be determined based on the size of the rod that would be used for the hairstyle.

Read more on hairstyle here: https://brainly.com/question/25247384

#SPJ12

Gyroscopic wander can be divided into two categories and these are:

Gyroscopic wander can be defined as a movement of the spin axis (axis of rotation) away from a specific fixed direction.

Based on scientific information and records, there are two main types of gyroscopic wander and these include the following:

Read more on gyroscopic wander here: https://brainly.com/question/12168194

#SPJ12

Answer:

[tex]2.5m/s^{2}[/tex]

Explanation:

Since the distance ,s = 500m

Initial velocity, u = 0m/s

Final velocity, v = 50m/s

We can one of the kinematics equations to find the acceleration.

[tex]v^{2} =u^{2} +2as\\50^{2} =0^{2} + 2a(500)\\2500 = 0 + 1000a\\1000a = 2500\\a = \frac{2500}{1000} \\= 2.5m/s^{2}[/tex]

Answer:

S=D÷T

Explanation:

50=0.5÷T

T= 100

In the image below, the focus lines are shown. The step can be done to bring the apple into focus is make the lens rounder. The correct option is A.

The lens is in spherical shape may be diverging or converging.

As light enters the eye, it is focused on the retina. Changing the pupil diameter, regulates the amount of light entering the eye. Changing lens shape will focus the light.

The changes in lens shape needed to maintain focus as the object distance changes.

Thus, the correct option is A.

Learn more about lens.

https://brainly.com/question/17014859

#SPJ1

Since we assume the accelerations are constant, the instantaneous acceleration is the same as the average acceleration, so in the first 6.80 seconds we have

[tex]\alpha_1 = \alpha_{\rm ave} = \dfrac{\Delta \omega}{\Delta t} = \dfrac{8.70\frac{\rm rev}{\rm s}}{6.80\,\rm s} \approx 1.28 \dfrac{\rm rev}{\mathrm s^2}[/tex]

In this time, the tub undergoes an angular displacement of

[tex]\theta_1 = \dfrac12 \alpha_1 (6.80\,\mathrm s)^2 \approx 29.6\,\mathrm{rev}[/tex]

In the next 19.0 seconds the tub has acceleration

[tex]\alpha_2 = \dfrac{-8.70\frac{\rm rev}{\rm s}}{19.0\,\rm s} \approx -0.458 \dfrac{\rm rev}{\mathrm s^2}[/tex]

and in this time, the tube undergoes an additional displacement of

[tex]\theta_2 = \left(8.70\dfrac{\rm m}{\rm s}\right)(19.0\,\mathrm s) + \dfrac12 \alpha_2 (19.0\,\mathrm s)^2 \approx 82.7\,\mathrm{rev}[/tex]

So the tub completes [tex]\theta_1+\theta_2 \approx \boxed{112\,\mathrm{rev}}[/tex].

When you attract every object in the universe with a force that is proportional to the mass of the objects and to the distance between them, we are obeying Newton's law of universal gravitation.

Newton's law of universal gravitation states that the force of attraction between two masses in the universe is directly proportional to the product of the masses and inversely proportional to the the square of the distance between them.

The mathematical interpretation of the above law is

Removing the proportionality sign,

Where:

From the above, When you attract every object in the universe with a force that is proportional to the mass of the objects and to the distance between them, we are obeying Newton's law of universal gravitation.

Learn more about Newton's law of universal gravitation here: https://brainly.com/question/9373839

#SPJ12

Taking into account the Newton's second law, the amount of force required to keep the object in motion if you ignore the surface friction is 0 N.

In first place, acceleration in a body occurs when a force acts on a body. There are two factors that influence the acceleration of an object: the net force acting on it and the mass of the body.

Newton's second law states that this force will change the speed of an object because the speed and / or direction will change. These changes in velocity are called acceleration.

So, Newton's second law defines the relationship between force and acceleration mathematically. This law says that the acceleration of an object is directly proportional to the sum of all the forces acting on it and inversely proportional to the mass of the object.

Mathematically, Newton's second law is expressed as:

F= m×a

where:

In this case, you know:

Replacing in Newton's second law:

F= 5 kg× 0 m/s²

Solving:

F= 0 N

Finally, the amount of force required to keep the object in motion if you ignore the surface friction is 0 N.

Learn more about the Newton's second law:

brainly.com/question/23845187

brainly.com/question/13959891

#SPJ1

Answer:

1.76 seconds/cycle

Explanation:

Frequency is   10 cycles / 17.6 seconds

PERIOD is  1/frequency = 17.6 seconds/10 cycles = 1.76 s/c    

          cycle is a vibration , so the unit may be  1.76 second / vibration

Answer:

Weaker, stronger

Explanation:

hope this helped!

Answer:

[tex]\fbox {weaker, stronger}[/tex]

Explanation:

The farther you bring charged objects from each other, the weaker the electrical force between them, and the bigger the charges on the objects, the stronger the electrical force between them.

Proving

Here we need the formula for Coulomb's Law, which is :

[tex]\boxed {F = \frac{1}{4\pi\epsilon_{0}}\times\frac{q_{1}q_{2}}{r^{2}}}[/tex]

As we can see, when the distance increases, the overall force will decrease as they are inversely proportional.

Similarly, as the product of charges is directly proportional to the electrical force produced, as the charges increase, the force increases.

Answer:

B

Explanation:

That is solar energy and the sun will be releasing energy constantly for the rest of its life, meaning renewable

An eclipse is an event in which the sun or moon is blocked from view due to the presence of another celestial body, whereas lunar phases are caused by the reflection of the sunlight.

An eclipse is an astronomical phenomenon where one celestial body (e.g., sun, moon) cannot be observed because another is interposed between the Earth and the first one.

Eclipses can be divided into moon eclipses (we cannot see the moon) and sun eclipses (we cannot see the sun).

On the other hand, moon phases occur due to how sunlight reflects the near side of the Moon.  

Moon phases can be divided into:

In conclusion, an eclipse is an event in which the sun or moon is blocked from view due to the presence of another celestial body, whereas lunar phases are caused by the reflection of the sunlight.

Learn more about eclipses here:

https://brainly.com/question/8643

#SPJ1

Answer: the other person explained it all

Explanation:

The moon's orbital plane is different from that of the earth's orbit around the sun due to which lunar and solar eclipses do not occur every month.

When the moon passes in front of Earth and the sun, it creates a solar eclipse and casts a shadow across the globe.

Only during the new moon phase, when the moon travels squarely between the sun and Earth and casts shadows on its surface, can a solar eclipse occur.

Due to the moon's orbit being five degrees off-center from Earth's orbit around the Sun, lunar eclipses do not happen every month and the Moon often passes above or below the shadow.

Lunar eclipses would happen every month if there were no tilt. Eclipses of the sun and the moon happen equally often.

Hence lunar and solar eclipses aren't coming every month.

To learn more about the solar eclipse refer;

https://brainly.com/question/17749647

#SPJ1

The reason why lunar and solar eclipses do not occur every month is because; the plane of orbit of the moon around the earth is not same as that of earth around the sun.

When the Moon passes between Earth and the Sun, there's solar eclipse while when the earth passes between the Sun and the Moon, casting a shadow on the Moon, there's lunar eclipse.

Hence, because the plane of orbit of the moon around the earth is not same as that of earth around the sun, we do not have lunar and solar eclipses every month.

Read more on solar and lunar eclipse;

https://brainly.com/question/14198324

#SPJ11

the distance is the first 80m+the second 80m she came back. So the distance is 160m. but the displacement is 0, because she came back by the direction she went.

scalars: distance, speed, time

vectors: displacement, velocity, acceleration

Squeezing the clutch lever to slow down is best to be done when approaching a curve and is denoted as option C.

This is a mechanical device which used in the engagement and disengagement of transmission system in a vehicle.

Slowing down will give the driver more time to maneuver the curves so as to prevent accident. This is why it is imperative to squeeze the clutch in such road condition.

Read more about Clutch here https://brainly.com/question/14318041

#SPJ1

a) 4.9 m

b) 38.3 m/s

c) 33.4 m

The three equations are,

v = u + at

v² = u² + 2as

s = ut + ½at²

According to the question,

Let hold the y-axis in the direction of gravity.

Initial velocity 0 = 0 /,

Initial height ℎ0 = 0 , and finish height ℎ = 75.0

gravitational acceleration = 9.8 /²

a) Determine the distance traveled during the first second.

By third equation of motion

[tex]S_{0} = v_{0} t +\frac{1}{2} gt^{2}[/tex]  where [tex]v_{0}[/tex] =0

then [tex]S_{0} = \frac{gt^{2}}{2} = \frac{9.8*1^{2} }{2} = 4.9 m[/tex]

b) Determine the final velocity at which the object hits the ground

let – velocity of object, when it falling to the ground

– moment falling to the ground, and obtain from condition:

ℎ = ℎ() = 75.0

[tex]v_{f} = v_{0} +gt = gt[/tex]

[tex]h (t_{f} ) = \frac{gt^{2} }{2} = 75.0 m\\t_{f} =\sqrt{\frac{2h_{f} }{g} } \\v_{f}= gt = g \sqrt{\frac{2h_{f} }{g} } =\sqrt{2hg_{f} }= =\sqrt{2*9.8*75.0} = 38.3 m/s[/tex]

c) Determine the distance traveled during the last second of motion before hitting the ground.

From the above equation we get,

[tex]\sqrt{2*75*9.8*1} - \frac{9.8*1^{2} }{2} = 38.3 -4.9 = 33.4 m[/tex]

Therefore,

a) 4.9 m is the distance traveled during the first second.

b) 38.3 m/s is the final velocity at which the object hits the ground

c) 33.4 is the distance traveled during the last second of motion before hitting the ground.

Learn more about equations of motion here: https://brainly.com/question/14355103

#SPJ1

The change in the momentum of the cart,given the data is 0.06 Kgm/s (Option D)

Momentum is defined as the product of mass and velocity. It is expressed as

Momentum = mass × velocity

Change in momentum = mass (final velocity - initial velocity)

From the data given above, the following data were obtained:

Change in momentum = m(v + u) (renounce)

Change in momentum = 0.5 (-0.24 + 0.36)

Change in momentum = 0.5 × 0.12

Change in momentum = 0.06 Kgm/s

Learn more about momentum:

https://brainly.com/question/250648

#SPJ1

The point along the line connecting the two charges is the total electric field due to the two charges equal to zero will be 0.3056.

The electric field strength is defined as the ratio of electric force and charge. The field's direction is determined by the direction of the force acting on the positive charge.

The megnitude of the electric field for charge 1 is;

[tex]\rm E_1 = (9 \times 10^9 )\times \frac{0.700 \times 10^{-9}}{x^2}[/tex]

The megnitude of the electric field for charge 1 is;

[tex]\rm E_2 = 9.0 \times 10^9 \times \frac{9.00 \times 10^{-9}}{(1.80-x)^2}[/tex]

The net electric field at point p is;

[tex]\rm \frac{0.700}{x^2} = \frac{9.00}{(1.40-x)^2} \\\\( \frac{1.40-x}{x} )^2 = \frac{9.00}{0.700} \\\\\ \frac{1.40-x}{x}=3.58 \\\\ \frac{140}{x} -1=3.58\\\\\ \frac{140}{x}=3.58+1\\\\ x=0.3056 \ m[/tex]

Hence, the point along the line connecting the two charges is the total electric field due to the two charges equal to zero will be 0.3056.

To learn more about the electric field strength refer to the link;

https://brainly.com/question/4264413

#SPJ1

The distance of the cliff from where you are is determined as 3,430 m.

Apply the formula for echo.

v = 2d/t

where;

2d = vt

d = vt/2

d = (343 x 20)/2

d = 3430 m

Thus, the distance of the cliff from where you are is determined as 3,430 m.

Learn more about echo here: https://brainly.com/question/14090821

#SPJ1

Answer:

Asteroids and comets have a few things in common. They are both celestial bodies orbiting our Sun, and they both can have unusual orbits, sometimes straying close to Earth or the other planets. They are both “leftovers” — made from materials from the formation of our Solar System 4.5 billion years ago. But there are a few notable differences between these two objects, as well. The biggest difference between comets and asteroids, however, is what they are made of.

While asteroids consist of metals and rocky material, comets are made up of ice, dust, rocky materials and organic compounds. When comets get closer to the Sun, they lose material with each orbit because some of their ice melts and vaporizes. Asteroids typically remain solid, even when near the Sun.

Right now, the majority of asteroids reside in the asteroid belt, a region between the orbits of Mars and Jupiter which may hold millions of space rocks of varying sizes. On the other hand, the majority of comets are in the farthest reaches of our Solar System: either 1. in the Kuiper Belt — a region just outside the orbit of the dwarf planet Pluto that may have millions of icy comets (as well as many icy dwarf planets like Pluto and Eris); or 2. the Oort Cloud, a region where trillions of comets may circle the Sun at huge distances of up to 20 trillion kilometers (13 trillion miles).

Answer:

they are both leftovers materials

Explanation:

think about how the solar system is made the comets and asteroids are both rocks and remains of the solar system

Answer:

its Q

Explanation: