Hi there!
Since the ball is directed 60° above the horizontal, we must use its HORIZONTAL component to find its displacement.
We can take the cosine to do so:
vcosθ = 28.3cos(60) = 14.15 m/s
Since the ball is in the air for 5 sec, we can use the following equation:
displacement = velocity · time (d = vt)
Plug in the values:
d = 14.15 · 5 = 70.75 m
If you drag a 50kg block across the floor which has a coefficient of friction of .30, what is
the force needed to accelerated it at 2.0m/s^2 ?
Answer:
750 Newton
Explanation:
force=mass(acceleration)
How to calculate work in chemistry.
Answer:
look on the bottom
Explanation:
Is it only the math or the physics/physical concepts that you don't get?
In this problem, you have a constant pressure of 1.00 atm. This being the case, it is an isobaric system (constant pressure), and so you have the equation that work (W) = -pressure(P) x change in volume (∆V)
This is written as W = -P∆V and is known as pressure-volume work.
Now, understand the conventions that are used.
-If work is done ON the system, it has a positive sign (+)
-If work is done BY the system, it has a negative sign (-)
In this problem, the gas is being compressed, i.e. the volume decreases, and so work is being done ON the system. Thus, the sign of W is positive (+). This comes out automatically because of negative sign in front of P∆V, So, we have W = -P∆V and substituting values, we have
W = -(1.00 atm)(1.5L - 1.25L) = -(1.00 atm)(0.25L) = -0.25 L-atm
Converting this to joules, we get -0.25 L-atm x 101.3 J/L-atm = -25.3 J (note the negative sign) Hope this all helps a little.
Virtual image formed by concave mirror
Answer:
yes
Explanation:
because it is a diverging mirror
If acceleration of a body starting from the rest is 0.5m/s^2 how long will it take the body to travel 400m(if u are genius answer this)
Answer:
[tex]\huge\boxed{\sf t = 40\ seconds}[/tex]
Explanation:
Given data:
Acceleration = a = 0.5 m/s²
Initial Velocity = Vi = 0 m/s
Distance = S = 400 m
Required:
Time = t = ?
Formulas used:
2 formulas
Third Equation of motion (2as = Vf²-Vi²)First Equation of motion (Vf = Vi + at)Solution:
Using third equation of motion firstly
2as = Vf²-Vi²
2(0.5)(400) = Vf² - 0²
400 = Vf²
Taking sqrt
Vf = 20 m/s
Now, Using First equation of motion:
Vf = Vi + at
20 = 0 + 0.5t
0.5 t = 20
Divide both sides by 0.5
t = 40 seconds
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807Find the displacement in the time interval 3 seconds to 4 seconds
A. 1m
B.3m
C.7m
D.9m
Answer:
B. 3 m
Explanation:
The position of the line at 3 seconds is 9 m and at 4 seconds is 12m .
Therefore; Displacement = 12 - 9 = 3 m
how fast should a girl 35kg Run so that her kinetic energy becomes 700 J?
Which jet stream affects weather In South Africa?
Answer:
The low-level easterly African jet stream is considered to play a crucial role in the southwest monsoon of Africa, and helps form the tropical waves which move across the tropical Atlantic and eastern Pacific oceans during the warm season.
Explanation:
A 0. 25 kg baseball is in contact with a bat for 0. 0075 s and exerts a force of 18,500 n. What impulse is delivered to the ball?.
Answer:
I = 138.75N*s
Explanation:
I = F*t
I = Impulse or momentum
t = Time or duration
F = Force
I = 18,500N*0.0075s
I = 138.75N*s
Which wave has the highest frequency?
Answer:
e
Explanation:
It is possible to create a wave having some frequency on a rope and then gradually it will become faster. During this time wavelength becomes shorter. Here the wave 'e' is found to has highest frequency. The correct option is E.
What is frequency of a wave?The number of oscillations of a wave per unit time is defined as the frequency. It is usually measured in Hertz and the frequency is directly proportional to the pitch. Humans can hear sounds with frequencies ranging between 20-20000 Hz.
The sounds with frequencies over the human ears range are called the ultrasonic sound and sounds with frequencies less than the audible range are called infrasonic sound. The wavelength and frequency are inversely proportional to each other.
When wavelength increases, frequency decreases and vice versa. So here wave E has maximum number of vibrations.
Thus the correct option is E.
To know more about frequency, visit;
https://brainly.com/question/18125929
#SPJ2
How are typhoons formed?
Need help!
Answer:
typhoon forms when winds blow into areas of the ocean where the water is warm. These winds collect moisture and rise, while colder air moves in below. This creates pressure, which causes the winds to move very quickly. The winds rotate, or spin, around a center called an eye.
pls pls pls help i need to know the correct answer and why it’s correct, thanks in advance
What is the relationship between power, work, and time?
A
As the amount of time increases,
power and work both increase.
B
As the amount of time increases,
power and work both decrease.
С
As the amount of time increases,
power increases and work is not affected. D. As the amount of time increases power decreases and work is not affected.
Answer:
it's ans is D because all three are wrong
What is a thought experiment?
Answer:
A thought experiment is an experiment carried out only in the imagination
Explanation:
A projectile is shot at an angle of 45 degrees with velocity components Vx and Vy both equal to 5 m/s. What is the magnitude of the initial velocity? Round to nearest tenth.
Answer:
7.1 m/s
Explanation:
Explanation is attached
How much work is done by a student holding a book with a force of 5N and walking forward 10 m?
Answer:
50 JExplanation:
The work done by an object can be found by using the formula
workdone = force × distance
From the question we have
workdone = 5 × 10 = 50
We have the final answer as
50 JHope this helps you
Dave and Alex push on opposite ends of a car that has a mass of 875 kg. Dave pushes the car to the right with a force of 250 N, and Alex pushes to the
left with a force of 315 N. Assume there is no friction.
What is the net force on the car in the x-direction? Help meee please
The net force acting on the car is 65 N to the left
The net force acting on an object is simply defined as the resultant force acting on the object.
From the question given, we obtained the following data:
Force applied to the right (Fᵣ) = 250 NForce applied to the left (Fₗ) = 315 NNet force (Fₙ) =?The net force acting on the car can be obtained as follow:
Fₙ = Fₗ – Fᵣ
Fₙ = 315 – 250
Fₙ = 65 N to the leftTherefore, the net force acting on the car is 65 N to the left
Learn more on net force: https://brainly.com/question/19549734
Since there is no friction, the net force on the car in the x - direction will be 65 Newtons
Given that Dave and Alex push on opposite ends of a car that has a mass of 875 kg.
Dave pushes the car to the right with a force of 250 N, which is positive direction and Alex pushes to the left with a force of 315 N which is negative direction. Since there is no friction, only the horizontal forces will be considered.
To calculate the net force on the car in the x-direction, we will find the difference between the two forces because of their directions are opposite to each other.
Net force = 315 - 250
Net force = 65 Newtons
Therefore, the net force on the car in the x - direction will be 65 Newtons
Learn more about resolution of forces here: https://brainly.com/question/11556949
How are earthquakes at continental plate boundaries different from earthquakes at mid-ocean ridges?
Differences between earthquakes at continental plate boundaries and earthquakes at mid-ocean ridges discussed in the answer.
What is earthquakes at continental plate boundaries and earthquakes at mid-ocean ridges?When plates travel in the same direction and collide, this happens. The thinner, denser, and more flexible oceanic plate dips beneath the thicker, more rigid continental plate when a continental plate meets an oceanic plate. It's known as subduction.
Deep ocean trenches, like the one that runs down South America's west coast, are created by subduction. The continent's undercut rocks start to melt. On occasion, a chain of volcanoes forms as the molten rock rises to the surface and passes through the continent. Nearly 80% of earthquakes happen along convergent borders, when plates are being forced together.
Shallow earthquakes, often less than 30 km deep, occur in small bands adjacent to plate borders along mid-ocean ridges and transform edges. There are earthquakes in subduction zones at various depths, some of which are more than 700 km deep. Because they occur everywhere throughout the subducting slab that stretches beneath the opposing plate, earthquake bands are wider along subduction zones. Wide areas of distributed earthquakes may be associated with collision zones between continents, such as those between the Eurasian plate and the plates to the south of the African, Arabian, and Indian tectonic arcs.
Learn more about earthquakes here:
https://brainly.com/question/29500066
#SPJ2
The horizontal movement of air from an area of high pressure to an area of lower pressure
options:
wind
weather
heat
conduction
Answer:
Explanation:
A wind is the horizontal movement of air from an area of high pressure to an area of lower pressure. Winds are caused by differences in air pressure. Most differences in air pressure are caused by unequal heating of the atmosphere
Analyze the effects on a passenger riding in a car traveling at
50 km/h that collides head-on with a solid object.
Without:
The passenger will get seriously injuredColliding with the windshield at 50km/hCould result in deathWith safety:
The seatbelt holds tge passengers body back so they dont collide with anythingTheir head is cushioned by the airbagThe passenger might get minor injuries but nothing serious will happenunlike acceleration and velocity, speed does not need to specify
Unlike acceleration and velocity, speed does not need to specify the direction of motion. Speed is a scalar quality.
PLEASE HELP!!
Identify how each machine changes the way work is done so as to
be useful.
Bicycle
Ax blade
Car jack
When you pedal a bike with chains attached to it, the wheel spins as you exert force from your body into the pedaling. The chains are connected to an almost circular shape.
How machine changes the way of work?Contrary to popular assumption, using machines does not result in more work being done. They merely alter the method of operation. Machines make work easier by increasing the amount of force used, extending the distance over which the force is exerted, or changing the direction of the force.
Simple machines are helpful because they lessen effort or enable humans to execute things that would normally be beyond their capacity. The wheel and axle, pulley, inclined plane, screw, wedge, and lever are examples of simple devices that are frequently employed.
To learn more about machine changes the way of work refer to:
https://brainly.com/question/902575
#SPJ2
If anyone knows please anwser
Answer:
C.
Explanation:
Answer:
c. Radio and T.V. signals
The _____________ experiences a temperature increase primarily due to the absorption of gamma rays and X-rays.
Answer:
The thermosphere experiences a temperature increase primarily due to the absorption of gamma-rays and X-rays.
echo is experienced more in a newly constructed room than in a furnished room why??
Answer:
in a furnished room the furniture scatter the sound waves and it doesn't reach our ears in the same manner it left our mouth.
what are the characteristics of a " team " in hit in volleyball ?
Answer:
A team may contact the ball a total of three (3) times before it is sent over the net.
As an aeroplane decelerates, its kinetic energy decreases. Suggest what happens to this energy
they are converted into thermal and sound energy as well as the kinetic energy in the air
A bob attached to a string of length L = 1.25 m, initially found at the equilibrium
position, is given an initial velocity v = 0.8 m/s. The maximum displacement angle,
Omax, is: (Take g=10 m/s)
17
3.2
13
10.2
6.4
Clear selection
A hoh attached to a string of length 2 m is displaced by an angle of 8º and then
The maximum displacement angle of the bob is 13⁰.
The given parameters;
Length of the pendulum, L = 1.25 mInitial velocity of the bob, v = 0.8 m/sThe maximum displacement of the bob is calculated by applying the principle of conservation of energy;
[tex]P.E = K.E\\\\mgh = \frac{1}{2} mv^2\\\\h = \frac{v^2}{2g} \\\\h = \frac{0.8^2}{2\times 10} \\\\h = 0.032 \ m[/tex]
The maximum displacement angle is calculated as follows;
[tex]cos \theta = \frac{L-h}{L} \\\\cos \theta = \frac{1.25 - 0.032}{1.25} \\\\\cos \theta = \frac{1.218}{1.25} \\\\cos \theta = 0.9744\\\\\theta = cos^{-1}(0.9744)\\\\\theta = 13\ ^0[/tex]
Thus, the maximum displacement angle of the bob is 13⁰.
Learn more here:https://brainly.com/question/13981780
what is the speed of a geosynchronous satellite orbiting mars?
Answer:
3.07 kilometres per second
I agree to hire you for 30 days. You can decide between two methods of payment: either (1) $1000 a day, or (2) one penny on the first day, two pennies on the second day and continue to double your daily pay each day up to day 30. Use quick estimation to make your decision, and justify it
Answer:
The second deal.
Explanation:
I had that before, if u pick the second one you will get twice as much in a year as the first one.
Compare the amplitude of these waves.
help?
Answer:
The greater the amplitude of a wave then the more energy it is carrying.
Explanation:
E is carrying the most energy which means that it has the highest amplitude
A has the least energy because it has the lowest amplitude
Find the volume of this figure.
4 dm
2 dm
3 dm
Answer:
4×2×3= 24dm^3
.......................
