a form of energy conversion that captures heat energy from within Earth

The ratio of rotational energy to the translational kinetic energy is 1:435.

The rotational energy of the ball is calculated as follows;

E = ¹/₂Iω²

where;

I = ²/₅MR²

I = ²/₅ x (0.0466)²(M)

I = 8.69 x 10⁻⁴ M

E =  ¹/₂Iω²

E =  ¹/₂(8.69 x 10⁻⁴ M)(62.9)²

E = 1.72 M

The translational kinetic energy of the ball is calculated as follows;

E = ¹/₂Mv²

E = ¹/₂ (38.7)²M

E = 748.85 M

Ratio of rotational energy to the translational kinetic energy is calculated as;

R = ( 1.72 M ) / ( 748.85 )

R = 1 : 435

Learn more about  translational kinetic energy here: https://brainly.com/question/9078768

#SPJ1

Answer:

The greater the object's surface area, the more air resistance it encounters.

Explanation:

Terminal velocity is the point at which the force of air resistance is equal to the force of gravity acting on an object. An object with a greater surface area will encounter more air resistance and therefore have a lower terminal velocity.

The greater the object's surface area, the more air resistance it encounters. Hence, its velocity decreases with increasing surface area.

Velocity is a physical quantity that measure the distance covered by an object per unit time. Velocity is the rate of speed and it is a vector quantity. Velocity of an object is affected by its mass, physical state, surface area, temperature etc.

As the mass increases, the velocity of a a falling object will be greater because, the gravitational force towards the massive object is greater and it falls rapidly.

As the surface area of the object increases, the air resistance that it encounters also increases. This air resistance acts as an opposition and decreases its velocity.

Find more on velocity :

https://brainly.com/question/18084516

#SPJ2

Answer:

im not to sure about it

maybe check online

Velocity of an object depends on its displacement and its direction. Displacement is the minimum distance between the starting and the end point. Velocity is the  rate of change in displacement.

Velocity can be calculated by displacement/ change in time. Relative velocity will be either equal or less than the relative speed, because speed is either greater than or equal to displacement. Also it is a vector quantity, so it also depends on the direction of the movement.

The magnitude depends on the magnitude of the displacement. The direction will be the direction of the resultant vector quantity. It is usually as the same as the direction of movement.

So velocity depends on the magnitude and direction of displacement.

For further information regarding Velocity, kindly refer

https://brainly.com/question/18084516

#SPJ4

Work is a unit of energy that results from exerting a force on the body that causes it to move. The formula W = F s cosθ denotes work done, where F denotes force applied, s denotes displacement, and = Angle between force and displacement. Joule is the SI unit of work.

Work in physics is the energy transferred to or from an object by applying force along a displacement. In its most basic form, work equals the product of force strength and distance traveled for a constant force aligned with the direction of motion. Work is the transfer of energy caused by a force acting on an object as it moves. The work done by a force on an object is calculated as the product of the magnitude of the force multiplied by the magnitude of the displacement multiplied by the cosine of the angle between them.

Here,

Work is a type of energy that is produced when a force is applied to the body, causing it to move. Work done is denoted by the formula W = F s cosθ , where F denotes force applied, s denotes displacement, and = Angle between force and displacement. The SI unit of work is the joule.

To know more about work,

https://brainly.com/question/21114262

#SPJ4

Answer:Answer:

1.85m/s

Explanation:

initial velocity = 45km/h

final velocity = 65km/h

time = 3 minutes

we change that 45km/h is 12.5 m/s and 65km/h is 18.05 m/s

Formula:

acceleration = (final velocity - initial velocity)/time

Solution:

18.05-12.5=1.85m/s

The speed of the car2 after the collision is 6 m/s . The direction is towards the right.

We have to note that the momentum of the object would have to be the product of the mass and the velocity of the object. In the case of the cars that we have we have to recall that; Car 1 has a mass of 8.0 kg and is moving left at 3.75 m/s. Car 2 has a mass of 5.5 kg and is moving right at 2.00 m/s.

We already know that;

Momentum after collision = momentum before collision

(8 * 3.75) + (5.5 * 2) = (8 * 1) + (5.5 * v)

v = final speed of car 1

Then we have;

30 + 11 = 8 + 5.5v

v = 6 m/s

Learn more about momentum:https://brainly.com/question/24030570

#SPJ1

Answer : Yes it is possible to increase the power with out changing the amount of work.

What is power ?

-- The power is defined by the amount of power divided by the time.

-- This time is the one needed to do the work.

-- We can understand this issue by analyzing an example with numeric values.

Work = 500 [J]

Time = 5 [s]

Power will be:

Now if we change the time to 2 seconds:

As we can see, the power was increased without the need to change the work.

What is Joule ?

- A unit of work or energy in the International System of Units (SI); it is equal to the work done by a force of one newton acting through one metre.

-- Named in honour of the English physicist James Prescott Boule, it equals 107 ergs, or approximately 0.7377 foot-pounds

Learn more about work from https://brainly.com/question/14131741.

#spj4

The drag force on the SUV is 12,899.25 N.

option A is the correct answer.

The drag force if the car has a drag coefficient of 0.6 and the air density is 1.3 kilograms per cubic meter is calculated as;

F = ¹/₂ρv²CA

where;

The drag force on the SUV is calculated as follows;

F = ¹/₂ x ( 1.3 kg / m³) x ( 35 m/s )² x ( 0.6 ) x ( 27 )

F = 12,899.25 N

Learn more about drag force here: https://brainly.com/question/23942493

#SPJ1

When the cannonball finally touches the ground, it will have been 1.94 seconds.

We may disregard the answer t = -0.249 seconds since what we're interested in is what happens after the cannon is fired (i.e., when time t > 0). As a result, the cannonball reaches height h = 0 m and hits the earth at time t = 6.474 seconds.

Initial speed (u) equals 251 m/s.

Cliff height (h) equals 91 meters.

(s) is the horizontal distance.

Cliff height (h) equals 91 meters.

Gravitational acceleration (g) equals 9.8 m/s2.

Time (t) =?

h = ½gt²

91 = ½ × 9.8 × t²

91 = 4.9 × t²

Divide both side by 4.9

t² = 91/4.9

Do both sides' square roots.

t = √(91/4.9)

t = 1.94 s

Initial velocity (u) =  251 m/s

Time (t) = 1.94 s

Horizontal distance (s) =?

s = ut

s = 251 × 1.94 s

s = 486.94m.

To know more about Initial velocity visit:-

https://brainly.com/question/9163788

#SPJ1

The lever arm is defined as the perpendicular distance between the axis of rotation and the force's line of action. torque τ = r × F

Torque is a form of force applied to an item that causes it to rotate around an axis. Force is an action that alters the motion of an item.

A three-newton force applied two metres from the fulcrum, for example, produces the same torque as a one-newton force applied six metres from the fulcrum.

Torque is used by levers to help humans lift or move items. Torque is defined as the product of a force and its distance from a fulcrum.

learn more about Torque

https://brainly.com/question/20691242

#SPJ4

When boating on federally controlled waters in an 18-foot boat, you are legally required to have certain safety equipment on board.

This includes a life jacket or personal flotation device (PFD) for each person on board, a throwable flotation device such as a ring buoy or cushion, and a fire extinguisher.

Along with that, sound-producing devices such as a horn or whistle, navigation lights for use during night time and restricted visibility conditions, and a visual distress signal such as a flare or flag.

Additionally, boats with a motor must also have a backfire flame control device and a ventilation system if the boat is equipped with an enclosed engine compartment.

It is also strongly recommended to have a first aid kit, a marine radio, and a signaling device such as a mirror or flashlight on board.

It's important to check with local authorities as well as the boating laws of the state you are in as they may have additional rules. Failure to have the required equipment on board can result in fines and penalties.

Learn more about safety at

https://brainly.com/question/10947149

#SPJ4

The speed of a 0.25 ball is 2√30 m/s. The result is obtained by using the formula for kinetic energy.

Kinetic energy is the energy of an object due to its motion. So, if an object is moving, it has kinetic energy.

The energy is equal to half mass of an object multiplied by the square of its velocity. The statement can be expressed as

KE = ½ mv²

Where

We have a ball with

Find the speed of the ball!

Using the formula for kinetic energy, the speed of the ball is

KE = ½ mv²

15 = ½ (0.25)v²

15 = 0.125v²

v² = 15/0.125

v² = 120

v = √(4×30)

v = 2√30 m/s

Hence, the speed of the ball is 2√30 m/s.

Leran more about kinetic energy here:

brainly.com/question/72216

#SPJ4

Joules (1568) provide the potential energy.

Based on the force exerted on the two objects, the potential energy equation is determined. P.E. = mgh, where m is the mass in kilograms, g is the acceleration caused by gravity (9.8 m/s2 at the earth's surface), and h is the height in meters, is the formula for gravitational force.

As a result of an object's position in relation to a zero position, potential energy is, in essence, the energy that is contained in the object. An object has gravitational potential energy if it is positioned at a height above (or below) the zero height.

Here m=20 kg

height h=8m

g= 9.8

Potential energy (P.E) = mgh

Potential energy (P.E) =  20*8*9.8

Potential energy (P.E) = 1568 J

Learn more about potential energy Visit: brainly.com/question/13997830

#SPJ4

20 Newton force is the force which can cause 1 m/s² acceleration in a body of mass 20 kg.

By the second law of Newton, force is defined as the time rate of change of momentum in a body. In other words a force can accelerate a body having some mass.

F = (m₁v₁-m₂v₂)/Δt

Where F is the force, m₁ & v₁ are the initial mass and velocity of the object and m₂ & v₂ are the final mass and velocity of the object.

Or, F = mass × acceleration

The SI unit of force is kg-m/s²or Newton. We can say that a force of 20 Newton can produce an acceleration of 1 m/s² in a body of 20 kg. Or it can produce a 4 m/s² acceleration in a body of 5 kg mass.

To know more about acceleration, here

https://brainly.com/question/12550364

#SPJ4

By bouncing into (or out of) a stretched position while using the extended muscles as a spring to pull you out of the stretched position, you are stretching or "warming up."

For instance, repeatedly bouncing down to touch your toes. Stretching in this way is thought to be harmful and risky for injuries. In that it is movement-based, ballistic stretching is comparable to dynamic stretching. You strive to extend a bodily part's range of motion rather of extending it all the way to the limit.

Reaching over to touch your toes and bouncing to enhance range are two examples of ballistic stretching. Due to the risk of injury and lack of benefit compared to other, safer forms of stretching like PNF and dynamic stretches, this sort of stretching is rarely advised.

Learn more about stretching Visit: brainly.com/question/27356012

#SPJ4

Answer: Priorities

Explanation:

Having integrity means that you live in accordance to your deepest values, you're honest with everyone, Honesty is the quality of being truthful and transparent in all interactions, whether personal or professional. And Respect ties both honesty and integrity together making priorities not considered a moral value because a value is something outside influences can't change, while priorities can change.

Speed is calculated as distance times speed. You need to be aware of the units for distance and time in order to calculate the units for speed. 1, 09, 1, 95, 2, 37, and 2, 80 m/s.

To learn more about distance refer to:

https://brainly.com/question/26046491

#SPJ4

It takes a train going 50 mph approximately 1 ½ miles (26 football fields) to stop safely.

The total stopping distance is the distance traveled by the vehicle from the moment the driver detects danger and steps on the brake until the vehicle comes to a stop.

The easiest way to calculate total stopping distance is to use the 3 second rule. When safe and legal, a U-turn allows a driver to turn a vehicle in a lane, side street, alley, or driveway. A 3-point turn is a safer way to change direction than a 2-point turn.

Stopping distance is the distance from when your body decides to stop a moving vehicle to when it comes to a complete stop.

For more information on stopping distance, visit :

https://brainly.com/question/28532160

#SPJ4

Cellular respiration is like a battery charger if ATP is like a battery. Substrate-level phosphorylation and oxidative phosphorylation are the two mechanisms used by our cells to produce ATP.

Plants possess three. They generate ATP when photosynthesis is taking place by using solar energy. During aerobic cellular respiration, glucose and oxygen combine to create ATP, which the cell can utilise. As byproducts, carbon dioxide and water are produced. The general equation for aerobic cellular respiration is: ATP is produced when glucose and oxygen combine in cellular respiration.

Glyceraldehyde-3-phosphate 1,3 diphosphoglycerate results in the first generation of ATP. Second, when phosphoenolpyruvate breaks down into pyruvate, ATP is created. For each of the two 3-phosphate molecules, these processes happen twice. Thus, during glycolysis, a total of 4 ATPs are created.

Learn more about respiration Visit: brainly.com/question/18169685

#SPJ4

Answer:

Question 7 is "Weight force down is greater than the air drag"

Question 8 is "600 N"

Explanation:

Question 7: When looking at the forces acting on the skydiver it's important to look at what force is larger, in this case, it's the weight. If two forces are acting in opposite directions, then the body will move in the direction of the force that has a larger value, 735 N.

Question 8: When the question tells you that the forces should be balanced, it means that they should turn out to equal zero if you were to subtract the forces, or you can think of it as trying to get the side that has a smaller number to be equal to the number that is greater. Since the question specifically says the parachute will ADD drag to the equation, you solve this one by asking yourself "What number + 135 will equal 735?" This ends up being 600 N.

Hope this helps!

A parallel force is a force that acts in the same direction as the motion of an object. The best explanation for a parallel force would be Newton's laws of motion. According to Newton's first law, an object at rest will remain at rest, and an object in motion will continue in motion in a straight line at a constant speed unless acted upon by an unbalanced force.

Therefore, a parallel force, acting in the same direction as the motion of an object, will increase or decrease the speed of the object but not change its direction of motion.

Newton's second law of motion states that the acceleration of an object is directly proportional to the net force acting on the object and inversely proportional to its mass. A parallel force will cause acceleration, that is a change in the velocity, of the thing. The greater the force, the greater the acceleration, and the smaller the force, the smaller the acceleration.

This means that if an object is already moving in a certain direction and a parallel force is applied, the object will accelerate in that direction.

To learn more about parallel force visit the link:

https://brainly.com/question/14371544

On the fahrenheit scale, water boils at 212 degrees.

Conversion of temperature from celcius to fahrenheit is done by given formula:

                                              F = (9/5 × C) + 32.

where, C = temperature in celcius

            F = temperature in fahrenheit

We know that water boils at 100° C. Putting this value in above equation, we get F = 212.

Thus, 212 degrees Fahrenheit is the boiling point of water. At this temperature, water will begin to boil and turn into steam.

To know more about temperature visit:

https://brainly.com/question/14771622

#SPJ4

The magnitude and direction of the resultant force is 25 N upwards.

The magnitude of the resultant force is the sum of all the forces acting at a point.

To obtain the magnitude of the resultant force, we will sum all the forces acting on the object and considering the signs of the forces as well.

The sum of all the forces acting on the object is calculated as follows;

F ( net ) = F₁ + F₂

where;

F (net) = 85 N - 60 N

F (net) = 25 N upwards

Learn more about resultant force here: https://brainly.com/question/25239010

#SPJ1

The complete question is below:

85 N force going vertically upwards and 60N going vertically down

Calculate the magnitude and direction of the resultant force.

The force that draws things together is gravity. It is the force that attracts anything in the direction of the earth's center.

The mass of the items and the separation between them determine how strong gravity is. An object's gravitational pull is stronger the more mass it has.

The gravitational attraction between two items decreases with increasing distance. Because of this, an object drops to the ground when you drop it.

You are drawn into the middle of the planet by gravity. In addition, gravity plays a role in the development of galaxies as well as other huge formations in space, as well as maintaining planets as well as other heavenly bodies in orbit around the Sun.

To learn more about gravity at

https://brainly.com/question/14874038?referrer=searchResults

#SPJ4

Newton's second law for rotational motion tells us that angular acceleration is directly related to the net torque and inversely proportional to the moment of inertia.

Mathematically, it is given as, τ = I α

where, τ is torque, I is moment of inertia, α is angular acceleration

Moment of inertia is described as the resistance to the change in rotation. It is given by the formula, I = m r², where m is mass and r is radius

Torque is nothing but the force and lever arm that can cause an object's rotation. It is also called as moment of force. Its SI units are N.m.

To know more about torque:

https://brainly.com/question/29775827

#SPJ4

Mass is not a force in physics. The amount of matter that makes up an object is expressed by its mass, which is expressed in kilogrammes.

Even though the terms force, mass, and acceleration are usually employed incorrectly. Force is a physical phenomenon that, when applied to an item, causes it to accelerate in the direction from which the force was applied. The amount of matter that makes up an object is expressed by its mass, which is expressed in kilogrammes.

Acceleration is the rate at which an object's velocity alters while moving in the same direction as the unbalanced force. When the forces are in balance, there is no net force and hence no movement. The Newton's second law, which also concerns how an object moves, connects these three ideas.

Learn more about mass:

https://brainly.com/question/15959704

#SPJ4

I believe the most important zone is cardiovascular, as it is essential for maintaining a healthy heart and lungs.

To learn more about human fitness refer :

brainly.com/question/30330399

#SPJ1

Modern engines need to deliver improved mechanical performance, and torque measurement helps them do this by increasing their accuracy and speeding up its rotation speed for efficiency assessments, some examples are:

The degree to which a measured value resembles a reference or well-known value is referred to as accuracy. For instance, if you measure a substance's weight in the lab and come up with a reading of 3.2 kg when the true or actual weight was 10 kg, your reading is inaccurate. Your measurement in this instance is quite far from the value that is already known.

The more traditional expression is "accuracy of measurement," which is defined as "... the degree to which the outcome of a measurement agrees with the true value" on an international scale.

Depending on the engine speed, both engine power and torque are indicators. Effective and energy-saving driving is made possible by high torque. Fast acceleration and a high top speed are made possible by an engine with high power.

To know more about torque visit:

https://brainly.com/question/6855614

#SPJ4