The final volume of the gas is 4.5 x 10-3 m3.
What is final volume?Final volume is the measure of the volume of a substance or object after all changes to it have taken place. It is the measure of the amount of space taken up by an object or substance at a specific point in time.
We can use the work-energy theorem to solve this problem. Work (W) is equal to the change in energy (E). Since the expansion is isobaric, the change in internal energy is zero. Therefore, W = E = PΔV, where P is the pressure and ΔV is the change in volume.
We know that W = 480 J and P = ?. To solve for ΔV, we can rearrange the equation to ΔV = W/P. Plugging in the given values, we have ΔV = 480 J / P.
We also know the initial volume (V1) of the gas, so we can calculate the final volume (V2) by adding the change in volume to the initial volume: V2 = V1 + ΔV. Plugging in the given values, we have V2 = 4.5 x 10-3 m3 + (480 J / P).
Therefore, the final volume of the gas is 4.5 x 10-3 m3.
To learn more about final volume
https://brainly.com/question/11835019
#SPJ4
of the forces present in the external environment, which is considered to be significantly uncontrollable?
Of the forces present in the external environment, which is considered to be significantly uncontrollable are political forces, competition force. In physics, nuclear energy is uncontrollable.
The economy, politics, competitors, customers, and even the weather are all uncontrollable factors. the energies which are mentioned in the above part are the forces that are involuntary and voluntary both and can be controlled or cannot be controlled by our own means. we cannot tend to change it. the nuclear energy whereas is the energy that generally cannot be controlled and we have to make controls to take a control over it. this is involuntary and generally cannot be controlled. by this primary information, we can firmly conclude that of the forces present in the external environment, which is considered to be significantly uncontrollable are political forces, competition force. In physics, nuclear energy is uncontrollable.
Learn more about Forces:
brainly.com/question/13191643
#SPJ4
A standing wave of the fifth harmonic is induced in a stopped pipe of length 1.5 m. the speed of sound through the air of the pipe is 340 m/s. how many antinodes form in the standing wave pattern?
a) 5
b) 3
c) 7
d) 6
e) 4
Answer:
To find the number of antinodes in the standing wave pattern, we need to find the wavelength of the fifth harmonic. The fifth harmonic has a frequency of 5 times the fundamental frequency, and the fundamental frequency is equal to the speed of sound divided by the length of the pipe. Thus, the wavelength of the fifth harmonic is the speed of sound divided by 5 times the fundamental frequency, which is equal to 340 m/s / (5 * (340 m/s / 1.5 m)) = 0.3 m.
Since the length of the pipe is 1.5 m, and the wavelength is 0.3 m, there will be 1.5 m / 0.3 m = 5 full wavelengths in the pipe. Since there is an antinode at both ends of the pipe, there will be a total of 5 + 2 = 7 antinodes in the standing wave pattern. Therefore, the correct answer is (C) 7.
Explain the working mechanism of a pinhole camera with a help of diagram.
Explanation:
A pinhole camera is the simplest yet most misunderstood camera. It takes amazing pictures, Get yourself a box that has a top and bottom which can be pulled apart 4 x 5 is a good size and available in the gift box department of Dollar Tree store.Poke or drill a small hole 1/8" dia. Put a piece of black electrical tape over the hole and have a small tab on the end so you can grab it and pull it off as the hole becomes the lens and shutter. Put a sheet of film on the bottom "a still scene" works best and pull the black tape off the hold quickly and replace it quickly. (try to use a slow speed film) The picture is done and you can take the film out inside your darkroom and develop it. If you can get ortho cromatic film from a printers office or newspaper that would work best as this type of film can be watched under a red light in the darkroom to see how it is developing so you do not over develop the negative. Ortho film was the firs dry film invented and is sensitive to all colors of light except red so you can watch it being developed in the darkroom under red light.two charged particles are a distance of 1.62 m from each other. one of the particles has a charge of 8.08 nc, and the other has a charge of 4.02 nc. (a) what is the magnitude (in n) of the electric force that one particle exerts on the other?
ghaegh agkl;agp oahjbkv w]ifskbv-ia]gaeglksrtbbthae atyaeyy
Plugging in the values given in the problem, we get: 1.69 * 10^-3 N.
What is electric force?Electric force is the force that exists between two objects that have an electric charge. It is one of the four fundamental interactions of nature, alongside gravitational force, the weak nuclear force, and the strong nuclear force.
The magnitude of the electric force that one particle exerts on the other can be calculated using the equation F = k * (q1 * q2)/r^2, where k is the Coulomb's Constant (k = 8.99 * 10^9 Nm^2/C^2), q1 and q2 are the charges of the two particles, and r is the distance between them.
Plugging in the values given in the problem, we get:
F = (8.99 * 10^9 Nm^2/C^2) * (8.08 nC * 4.02 nC)/(1.62 m)^2
F = 1.69 * 10^-3 N
To learn more about electric force
https://brainly.com/question/28740412
#SPJ4
a motor has a power rating of 1000 w. approximately how long will it take the motor to lift a 50 n weight a distance of 150 m, if it is operating at full power?
The electric motor takes 7,5 seconds to lift the 50 N. It is important to note that Power is a rate and energy is a scalar quantity.
To estimate the power required by a motor over a certain period of time, you would need to know the load that the motor will be driving (such as the weight of the object being moved, the resistance of the system, etc.) and the operating conditions (such as the speed at which the motor will be running, the duration of the operation, etc.).
Power = Force x velocity
From the text we know that the value of power is 1000 W. The value of force is 50 N and the distance is 150 m.
So, we get:
1000 = 50 N x velocity
Velocity = 20 m/s
To know how long a power rating of 1000 W can take the motor to lift a 50 N, we can use the formula:
s = v x t
Because we want to know the time, so the it will be
t = s/v
t = 150/20
t = 7,5 second
Or we can calculate it by this formula:
Power = work / time
Power = Force x distance/time
time = Force x distance / Power
time = 50 N x 150 m / 1000
time = 7,5 second
Learn more about motor power time estimation, here https://brainly.com/question/30107717
#SPJ4
most of the focusing is done at the front of the eye by a clear membrane that bends light inward. this membrane is called the question 39 options: a) cornea. b) pupil. c) iris. d) lens.
At the front of the eye, most of the focusing is performed by the cornea, a transparent membrane that bends light inward. The ideal selection is A. The cornea, which is transparent and forms the front of the eye.
Shields the iris and pupil. The anterior chamber, etc. Around two thirds of the optical power of the eye is refracted by the cornea, anterior chamber, and lens. Light, often known as visible light, is electromagnetic radiation that can be seen by humans. The wavelengths of visible light are commonly thought to range from 400 to 700 nanometers (nm), or from 750 to 420 terahertz. In physics, a force is an effect that has the ability to change how an object moves.
Learn more about wavelength here
https://brainly.com/question/13533093
#SPJ4
Car A and car B of equal mass travel up a hill. Car A moves up the hill at a constant speed that is twice the constant speed of car B. Compared to the power developed by car B, the power developed by car A is
Car A and car B of equal mass travel up a hill. Car A moves up the hill at a constant speed that is twice the constant speed of car B. Compared to the power developed by car B, the power developed by car A is four times as great.
The power developed by a vehicle is the product of its mass and acceleration. Car A has the same mass as car B but is traveling at twice the speed. Therefore, if the speed of Car A is double the speed of Car B, then the acceleration of Car A must be double that of Car B. This means that the power developed by Car A must be four times the power developed by Car B.
This is because the power is equal to the mass multiplied by the acceleration, so if the acceleration is double, then the power must also be double. The power of a vehicle also depends on the amount of friction, or resistance, it encounters. Since Car A and Car B have the same mass, any difference in the power developed by each car is solely due to the difference in their speeds. Therefore, the power developed by Car A is four times that of Car B.
To know more about mass refer to the link brainly.com/question/19694949
#SPJ4
during the brutal mass arrest depicted on page 82, vladek is framed by a panel shaped like a jewish star (star of david). how does this device express his situation at that moment?
uring the brutal mass arrest depicted on page 82, vladek is framed by a panel shaped like a jewish star (star of david). how does this device express his situation at that moment?
The device of framing Vladek with a panel shaped like a Jewish star (Star of David) during the brutal mass arrest depicted on page 82 expresses his situation at that moment as one of persecution and identity.
The Jewish star is a symbol of Jewish identity and heritage, and the fact that Vladek is framed within it highlights the fact that he is being targeted specifically because of his Jewish identity. Additionally, the Jewish star is a symbol of the Holocaust and the persecution of Jews during World War II, so it serves to connect Vladek's experience of being arrested to the larger historical context of the Holocaust. Furthermore, it also serves as a reminder of the dehumanization and persecution of the Jews and the atrocities committed against them by the Nazi regime
Learn more about star of david here:
https://brainly.com/question/11216895
#SPJ4
The tracking device sends data to a computer during the game. one advantage of the data being sent during the game.
The tracking device sends data to a computer during the game and one advantage of the data being sent during the game is to ensure that adequate statistics and summary of the game is available.
What is a Program?This is referred to as a set of instructions that a computer needs to carry out its tasks is known as a program while data on the other hand is a set of raw facts and figures.
The tracking device sends data to a computer during the game which makes the statistics and summary available for the game accurate and adequate.
Read more about Data here https://brainly.com/question/964590
#SPJ1
What is the kinetic energy of Usain Bolt if he has a mass of 80 kg and is sprinting at 10 m/s?
Answer: The kinetic energy of Usain Bolt, who has a mass of 80 kg, is 4000 Joules.
Explanation:
What is the kinetic energy of Usain Bolt if he has a mass of 80 kg and is sprinting at 10 m/s?
Data:
m = mass = 80 kg
V = velocity = 10m/s
Ec = Kinetic energy = ?
To calculate the kinetic energy of Usain Bolt, we apply the following formula, substitute data and solve:
Ec = m * v²/2 Ec = (80 kg * (10 m/s)²)/2 Ec = (80 * 100 m²/s²)/2 Ec = 4000 JTo learn at https://brainly.com/question/15579795To learn at https://brainly.com/question/14165786Formula for Kinetic Energy:
[tex]KE=.5mv^2[/tex]
kinetic energy(measured in joules) = .5 * mass(measured in kg) * velocity(measured in m/s)^2
__________________________________________________________
Given:
[tex]m=80kg[/tex]
[tex]v=10m/s[/tex]
[tex]KE=?[/tex]
__________________________________________________________
Finding kinetic energy:
[tex]KE=.5mv^2[/tex]
[tex]KE=.5(80)(10)^2[/tex]
__________________________________________________________
Answer:
[tex]\fbox{4000 Joules}[/tex]
a certain light truck can go around a flat curve having a radius of 150 m with a maximum speed of 36.0 m/s. with what maximum speed can it go around a curve having a radius of 78.0 m?
Maximum speed can it go around a curve having a radius of 78.0 m
The speed of an object, also known as v in kinematics, is a scalar quantity that depends on how much its position changes over time or how much it changes per unit of time. Velocity and speed are the two distinct concepts.
The International System of Units (SI) uses the metre per second as the unit of both speed (a scalar quantity) and velocity (a vector quantity with direction and magnitude), with one metre per second being the speed of a body traveling one meter in one second.
The truck receives the necessary centripetal acceleration from friction between the tires and the flat road in order to safely and skid-free navigate the bend.
[tex]a_{c,max} =\frac{v^{2}_{max} }{r} \rightarrow( 1)[/tex]
inserting the given values we get
[tex]a_{c,max} =\frac{(36)^{2}_{} }{150}[/tex]
[tex]a_{c,max} =[/tex]8.64m[tex]s^{-2}[/tex]
For a changed in the radius of curve of 78.0m , the maximum speed can it go
[tex]v_{new,max} =\sqrt(a_{c,max} \times R_{new} )[/tex]
[tex]v_{new,max} =\sqrt(8.64\times 78 )[/tex]
[tex]v_{new,max} =\\[/tex]25.95m/s
Learn more about Speed
brainly.com/question/28224010
#SPJ4
two ice skaters suddenly push off against one another starting from a stationary position. the 55-kg skater acquires a speed of 0.175 m/s relative to the ice. what speed does the 70-kg skater acquire relative to the ice?
The 70-kg skater acquires a speed of -0.125 m/s relative to the ice, meaning that it moves in the opposite direction of the 55-kg skater.
What is speed?The distance traveled in a unit of time is called speed. It refers to a thing's rate of movement. The scalar quantity known as speed is the velocity vector's magnitude. It has no clear direction.
In this case, the two skaters and the ice are considered as a closed system since no external force is acting on them. Therefore, the total momentum before and after the skaters push off against one another must be the same.
We can use this principle to find the speed of the 70-kg skater relative to the ice. Let's call the speed of the 55-kg skater v1 and the speed of the 70-kg skater v².
We can use the formula for momentum p = m*v,
where m is the mass and v is the velocity.
The total momentum before the skaters push off is 0 (since they are at rest) and the total momentum after the skaters push off is:
p = (55 kg) * (0.175 m/s) + (70 kg) * v²
Since the total momentum is conserved, we can set the initial momentum to be equal to the final momentum:
0 = (55 kg) * (0.175 m/s) + (70 kg) * v²
Solving for v2, we get:
v2 = -(55 kg * 0.175 m/s) / 70 kg = -0.125 m/s.
The 70-kg skater acquires a speed of -0.125 m/s relative to the ice, meaning that it moves in the opposite direction of the 55-kg skater.
To know more about speed, visit:
brainly.com/question/28224010
#SPJ4
in which of the following situations is the car accelerating? select one: a. the car is accelerating in all of the situations below. b. the car is accelerating when it travels different distances in the same amount of time. c. the car is accelerating when it goes around a curve at constant speed. d. the car is accelerating when it goes over a hill at constant speed. e. the car is accelerating when it is sitting still on the planet earth as it spins and orbits.
In every scenario, the automobile is accelerating. The automobile is accelerating in the scenarios below.
What do you meant by accelerated?gaining speed means moving more quickly. The vehicle accelerated gradually. The rate of change has quickened recently. To move through the grades more quickly than is customary.
Whatever happens when you speed up?Due to this, a shift in speed could be either a shift in how quickly something is going or a shift in the way it is moving. When an object accelerates, it alters its direction, speed, or both.
To know more about accelerating visit:
https://brainly.com/question/12550364
#SPJ4
A light bulb is 60cm from a concave mirror with a focal length of 20cm. Use ray tracing to determine the location of its image. Is the image upright or inverted? Is it real or virtual. Verify your results by doing the calculations.
As we draw the ray diagram, the image seems to fall between the f and c. It was real, inverted and magnified image.
Here it is given that the focal length is 20 cm.
So the curvature of the mirror will be 2f = 2 ×20 = 40 cm.
The light bulb is 60 cm away from the concave mirror. So the object is beyond C. As per theory, if an object is beyond c, the image will fall between c and f, and it will be a real, diminished and inverted image. The ray diagram we draw also give the same result.
Lets look into calculations.
The distance between object, the image and focal length is related by the equation,
1/f = 1/v +1/u
v is the distance of image from mirror
u is the distance of the object from the mirror.
So , 1/v = 1/f - 1/u
= 1/20 - 1/60
= 60-20 / 1200 = 1/30
So v = 30 cm.
This proves the diagram we draw is correct.
So the image will be formed 30 cm away from the mirror and it will be real, inverted, diminished image.
For further details regarding concave mirrors, kindly refer,
https://brainly.com/question/3555871
#SPJ4
A 10cm×10cm×10cm wood block with a density of 690 kg/m3 floats in water.
PART A
What is the distance from the top of the block to the water if the water is fresh?
PART B
If it's seawater? Suppose that rho=1030kg/m3.
Part A) The distance from the top of the block to the water if the water is fresh is 3 cm.
Part B) The distance from the top of the block to the sea water if the water is fresh is 3.31cm.
What does density mean in its simplest form?We refer to an object or substance's volume (or how much space it occupies) in terms of its density (its mass).
(a) The density of fresh water is ρwater = 1000 kg/m³
ΣF = 0
ΣF = - (ρwood)g(Vwood) + (ρwater)g(vwood)
- (ρwood)g(Vwood) + (ρwater)g(vwood) = 0
(vwood)/(Vwood) = (ρwood)/(ρwater)
(690×h)/(10×10×10) = (690)/(1000)
h = 6.9 cm
The block's top is above the water, and it is 10 - 6.9 = 3 cm
(b) The density of seawater is ρsea = 1030 kg/m³
(vwood)/(Vwood) = (ρwood)/(ρsea)
(690 × h')/(10 ×10 × 10) = (690)/(1030)
h' = 6.69 cm
The distance from the top of the block to the water is
10 - 6.69 = 3.31cm.
To know more about density visit:
https://brainly.com/question/2356214
#SPJ4
if you accelerator fails, into which gear should a driver shift? select one: a. neutral (n) b. drive (d) c. park (p) d. reverse (r)
If accelerator fails, into neutral gear a driver should shift. The correct option is A.
What is gear?The amount of engine power available is determined by the gears. While fifth gear has the least pulling force but the widest range of speed, first gear has the most pulling power but the least potential for speed.
Keep calm and move to neutral in the event that the accelerator fails. Consider pressing the gas pedal to see if it reacts. Look for a place to leave the road that is secure. Brake and steer as softly as you can.
Thus, the correct option is A.
For more details regarding gear, visit:
https://brainly.com/question/14455728
#SPJ1
A large raindrop the type that lands with a definite splat--has a mass of 0.014 g and hits your roof at a speed of 8.1 m/s.a. What is the magnitude of the impulse delivered to your roof? Express your answer with the appropriate units.b. If the raindrop comes to rest in 0.37 ms, what is the magnitude of the force of the impact? Express your answer with the appropriate units.
The impulse delivered to the roof is -0.115 Ns and the magnitude of the force of the impact is -31.17 kN.
a. Impulse is defined as the product of the force acting on an object and the time over which the force is applied. In this case, the impulse delivered to the roof is the product of the force acting on the raindrop and the time it takes for the raindrop to come to a stop after hitting the roof. Since we don't know the time of impact, we can use the impulse-momentum theorem which states that the impulse of a force acting on an object is equal to the change in momentum of the object.
The impulse delivered to the roof is given by J = Δp = pf - pi
The initial momentum of the raindrop is given by pi = m * vi = 0.014g * 8.1 m/s = 0.115 Ns
Since the final velocity of the raindrop is zero (it comes to rest), the final momentum is zero. Therefore, the impulse delivered to the roof is J = pf - pi = 0 Ns - 0.115 Ns = -0.115 Ns
b. To find the force of the impact we can use the equation: F = J/t
where F is the force of the impact, J is the impulse delivered to the roof, and t is the time it takes for the raindrop to come to a stop after hitting the roof.
We have that t = 0.37 ms = 0.00037 s
So F = J/t = -0.115 Ns / 0.00037 s = -31167.57 N or -31.17 kN
Here, the negative sign of the force tells us that the force is opposite to the direction of motion, which means that the force is acting to stop the motion of the raindrop.
Read more about the Impulse :
brainly.com/question/25700778
#SPJ4
momentum vectors. 12. An 8 g bullet is fired from a rifle. The bullet passes through a 10 cm plank. This reduces the bullet's velocity from 400 ms west to 300 ms¹ west. a) Calculate the bullet's initial momentum.
The initial momentum of the bullet is 3.2 kg m/s.
What is the principle of conservation of linear momentum?The principle of conservation of linear momentum states that in an isolated system, the total momentum of the system is always conserved.
Based on the law of conservation of linear momentum, the sum of the initial momentum of an object is always equal to the sum of the final momentum of the object.
Pi = Pf
Pi = mv
where;
m is the mass of the objectv is the initial velocity of the objectThe initial momentum of the bullet is calculated as follows;
Pi = ( 400 m/s ) x ( 0.008 kg )
Pi = 3.2 kg m/s.
Learn more about initial momentum here: https://brainly.com/question/29411557
#SPJ1
What waves are transverse waves that disturb electromagnetic fields?
Radio waves are transverse waves that disturb electromagnetic fields.
What is electromagnetic fields?Electromagnetic field, a feature of space brought on by the movement of an electric charge. Only an electric field will be generated by a stationary charge in the surrounding area. A magnetic field is also created if the charge is in motion.
A changing magnetic field can also create an electric field. An electromagnetic field is created by the mutual interaction of electric and magnetic fields. This field is thought to exist independently of any charges or currents (a stream of moving charges) to which it may be related. It is possible to think of this electromagnetic field in some situations as an electromagnetic energy-transporting wave.
Learn more about Radio waves
https://brainly.com/question/21995826
#SPJ4
A satellite is to be put into an elliptical orbit around a moon. The moon is a sphere with radius of 959 km. Determine an equation for the ellipse if the distance of the satellite from the surface of the moon varies from 357 km to 710 km.
If the distance of the satellite from the surface of the moon varies from 357 km to 710 km, the equation of the ellipse is:
x²/(1669)² + y²/(1316)² = 1.
What is ellipse?In mathematics, an ellipse is a planar curve with two focal points, where the total of the two distances from any point on the curve to the focal points is a constant.
Length of semi-major axis = (959 km + 710 km) = 1669 km.
Length of semi-minor axis = (959 km + 357 km) = 1316 km.
Hence, the equation of the ellipse is:
x²/(1669)² + y²/(1316)² = 1.
Learn more about ellipse here:
https://brainly.com/question/14281133
#SPJ1
A brass is 1 m long. If the coefficient of expansion in length of the brass is 0.000019/K and the increase in length of the brass is 5.757 mm. How much temperature change occurred?
The temperature change that occurred when the 1 m long brass experience an increase in length of 5.757 mm is 303 °C
How do I determine the temperature change?Coefficient of linear expansion is given by the following formula:
α = ΔL / L₁(ΔT)
Where
α is the coefficient of linear expansionΔL is the change in length L₁ is the original lengthΔT is the temperature changeWith the above formula, we can obtain the temperature change as illustrated below:
Original length (L₁) = 1 m = 1000 mmCoefficient of epansion (α) = 0.000019 K¯¹ Change in length (ΔL) = 5.757 mmTemperature change (ΔT) = ?α = ΔL / L₁(ΔT)
0.000019 = 5.757 / (1000 × ΔT)
Cross multiply
0.000019 × 1000 × ΔT = 5.757
0.019 × ΔT = 5.757
Divide both sides by 0.019
ΔT = 5.757 / 0.019
ΔT = 303 °C
Thus, we can conclude that the temperature change is 303 °C
Learn more about temperature:
https://brainly.com/question/17107322
#SPJ1
Three identical rocks are launched with identical speeds from the top of a platform of height 0 h . The rocks are launched in the directions indicated above. Rock 1, of mass m, reaches a maximum height hmax after being launched. During the time between the instant rock 1 is launched from height h0 and the instant it returns to height h0, the work done on the rock by the gravitational force is
The work done by the gravitational force on rock 1 can be calculated using the work-energy theorem. This theorem states that the net work done on an object is equal to the change in its kinetic energy.
What is gravitational force?Gravitational force is the attractive force between two objects that is proportional to their masses and inversely proportional to the square of the distance between them. It is the weakest force in nature and is the reason why objects with mass are attracted to each other. This force was first described by Isaac Newton in his law of universal gravitation, which states that the force between two objects is proportional to the product of their masses and inversely proportional to the square of the distance between them.
Since the rock is launched from rest at a height of h0 and then returns to the same height, its kinetic energy does not change and therefore the net work done on the rock is zero. This means that the work done by the gravitational force on the rock is also zero, since the only force acting on the rock is the gravitational force.
To learn more about gravitational force
https://brainly.com/question/19050897
#SPJ4
help please as fast as you can
The height of the cliff is 43.6 m.
What is the height of the cliff?
The height of the cliff is calculated by applying the following kinematic equation as shown below.
h = vt + ¹/₂gt²
where;
v is the initial velocity of the rockt is the time of motiong is acceleration due to gravityThe height of the cliff is calculated as follows;
h = ( 12 m/s x 2 s ) + ¹/₂ ( 9.8 m/s² ) x ( 2.0 s )²
h = 43.6 m
Thus, the height of the cliff is a function of the initial velocity, time of motion and acceleration due to gravity.
Learn more about height of cliff here: https://brainly.com/question/14524817
#SPJ1
Anna holds a 12 D magnifier directly in front of her eye to get a close look at a 19-mm-diameter penny. What is the closest possible distance that she can hold the coin to have it appear in focus? At this distance, how large does the image of the coin appear on her retina? (Assume a typical 25 cm near point and a distance of 1.7 cm between the lens and the retina.)
The near point of the eye is the shortest distance Anna can hold the coin and still have it appear in focus.
By near point of the eye, what do you mean?The closest distance at which an object can be placed in front of the eye and still be in focus is the near point of the eye, also referred to as the closest point of distinct vision. To change the eye's focal length and enable it to focus on objects at different distances, changes are made to the pupil's size and the lens of the eye.
The near point for a typical eye is approximately 25 cm.
Use the lens equation,
1/f = 1/d₀ + 1/di
We know that f = 12 D and di = 1.7 cm
Therefore,
1/f = 1/d₀ + 1/di
1/12D = 1/d₀ + 1/(1.7cm)
d₀ = 1/(1/12D - 1/(1.7cm))
d₀ = -1.98cm
The unit will be in cm.
The closest distance at which an object can be positioned in front of the eye and still be in focus is at the near point of the eye. The near point of a typical eye is approximately 25 cm.
To know more about lens equation visit:
https://brainly.com/question/11971432
#SPJ4
The near point of the eye is the closest distance at which Anna can hold the coin and still have it seem in focus. She can make out the picture of the coin at 1.98 cm.
By the near point of the eye, what do you mean?The closest distance at which an object may be placed in front of the eye and still be in focus is the near point of the eye, sometimes referred to as the nearest point of distinct vision. The pupil size and the eye's lens can be altered to change the eye's focal length and enable it to focus on objects at different distances.
The near point of a typical eye is roughly 25 cm distant.
Use the lens equation,
1/f = 1/d₀ + 1/di
We are aware that di = 1.7 cm and f = 12 D.
Therefore,
1/f = 1/d₀ + 1/di
1/12D = 1/d₀ + 1/(1.7cm)
d₀ = 1/(1/12D - 1/(1.7cm))
d₀ = -1.98cm
Centimeters will be used to measure it.
The closest point at which an object may be positioned in front of the eye and still be in focus is the near point of the eye. The near point of a typical eye is roughly 25 cm distant.
To know more about lens equation visit:
https://brainly.com/question/11971432
#SPJ4
An earth satellite moves in a circular orbit at a speed of 4000 m/s. What is its orbital period?
An earth satellite moves in a circular orbit at a speed of 4000 m/s, its orbital period is 648.84 hours.
What is Newton's gravitational law?Every particle in the universe is said to attract every other particle with a force along a line connecting them, according to Newton's universal law of gravitation. The force is inversely proportional to the square of the distance between them and directly proportional to the product of their masses.
F= G[tex]\frac{m1m2}{R^{2} }[/tex]
where F is Gravitational Force, G is Gravitational Constant (6.67×[tex]10^{-11}[/tex]Nm²/kg²), m is mass of the object and R is the distance between objects(m).
Given:
speed of the satellite is v=4000m/s.
mass of the earth=M=6×[tex]10^{24}[/tex] kg.
∑F=ma
G[tex]\frac{Mm}{R^{2} }[/tex]=m[tex]\frac{v^{2} }{R}[/tex]
G[tex]\frac{M}{R^{2} }[/tex] = [tex]\frac{v^{2} }{R}[/tex]
G[tex]\frac{M}{R\\}[/tex] = [tex]v^{2}[/tex]
R=G[tex]\frac{M}{v^{2} }[/tex]
2πR= 2πG[tex]\frac{M}{v^{2} }[/tex]
2πR/v= (2πG[tex]\frac{M}{v^{2} }[/tex]) /v
T= 2πG[tex]\frac{M}{v^{3} }[/tex]
T= 2π×6.67×[tex]10^{-11}[/tex]×[tex]\frac{6*10^{24} }{4000}[/tex]
T= 648.48 hours.
To know more about gravitational law, visit:
brainly.com/question/858421
#SPJ4
assume that the charge is emitted with velocity v0 in the positive x direction. between the origin and the screen, the charge travels through a constant electric field pointing in the positive y direction. what should the magnitude e of the electric field be if the charge is to hit the target on the screen?express your answer in terms of m , q , yh , v0 , and l .
The magnitude e of the electric field be if the charge is to hit the target on the screen is E = mv₀²yh/0.5qL².
Charge's speed in the x direction is equal to v₀.
The charge's time to reach the screen at a distance L, t = L/v₀
F = qE = ma, which is the force on the charge
When the two equations are equalized, force ma = qE/m and charge a = qE/m
The charge's initial velocity in the y-direction is o, and the vertical distance it covers is given by the equations
y = 0.5 (qE/m) (L/v₀)
y = 0.5qL²E/mv² and y = 0.5at².
If the target on the screen is the charge's intended target, y = yh
yh = 0.5qL²E/mv²
Making E the formula's subject, the following is the size of the electric field:
E = mv₀²yh/0.5qL².
know more about charge here
https://brainly.com/question/3412043#
#SPJ4
how long does it take a plane, traveling at a constant speed of 180 m/s, to fly once around a circle whose radius is 2700 m?
It would take the plane approx. 93 seconds to fly once around circle, traveling at a constant speed of 180 m/s
What is meant by speed ?Speed is defined as the rate of change of position of object in any direction. Speed is measured as the ratio of distance to the time in which that distance was covered.
The circumference of a circle is 2 * pi * radius, where pi is approximately 3.14. Therefore, circumference of the circle with a radius of 2700 m is:
2 * pi * 2700 m = 16,800 m
Given, constant speed of 180 m/s
As, distance = speed * time
So, time = distance / speed
time = 16,800 m / 180 m/s
So, time = 93.333 seconds or 93 seconds and 20 milliseconds
It would take plane approximately 93 seconds to fly once around the circle, traveling at the constant speed of 180 m/s
To know more about speed, refer
https://brainly.com/question/13943409
#SPJ4
when combining equilibrioum constants, what are the general rules for altering k c and combining two or more k c values?
The general rules for combining equilibrium constants (Kc) when performing equilibrium calculations include:
What is kc values?KC values (also known as partition coefficients) are a measure of the relative solubility of a compound in two different solvents. They are used in biochemistry and pharmacology to determine the solubility of a drug in water and in lipids (fats). KC values can provide insight into the absorption and distribution of a drug in the body, and can also help predict the effectiveness of a drug.
1. Multiply the Kc values together if the reaction is being reversed.
2. Divide the Kc values if the reaction is being advanced.
3. If the reaction involves more than two Kc values, use the appropriate algebraic equations to combine the values.
4. Always remember to keep track of the total number of moles of reactants and products involved in the equilibrium calculation.
5. When combining Kc values, be sure to include the necessary exponents from the balanced equation.
6. When combining Kc values, always maintain the same units for consistency.
7. When combining Kc values, the temperature must remain constant for the entire calculation.
8. Finally, always check your work to make sure the correct Kc value was calculated.
To know more about kc values click-
https://brainly.com/question/12994701
#SPJ4
The general rules for combining equilibrium constants (Kc) when two or more kc values are described below.
What is Kc values?Kc values (also known as partition coefficients) are a measure of the relative solubility of a compound in two different solvents. They are used in biochemistry and pharmacology to determine the solubility of a drug in water and in lipids (fats). Kc values can provide insight into the absorption and distribution of a drug in the body, and can also help predict the effectiveness of a drug.
1. Multiply the Kc values together if the reaction is being reversed.
2. Divide the Kc values if the reaction is being advanced.
3. If the reaction involves more than two Kc values, use the appropriate algebraic equations to combine the values.
4. Always remember to keep track of the total number of moles of reactants and products involved in the equilibrium calculation.
5. When combining Kc values, be sure to include the necessary exponents from the balanced equation.
6. When combining Kc values, always maintain the same units for consistency.
7. When combining Kc values, the temperature must remain constant for the entire calculation.
8. Finally, always check your work to make sure the correct Kc value was calculated.
To know more about equilibrium constants refer to-
https://brainly.com/question/19340344
#SPJ4
Please help me, thank you!
Answer:
deeper red
Explanation:
hope this helps
A car travels for 3 hours to a distant city 200 km due East. What was its (1) speed, (2) velocity?
Answer:
v=66.6km/hr
V=66.6km/hr due east
Explanation:
[tex]v= \frac{s}{t} [/tex]
given
s=200km
t=3hr
required
v=?
solution
v=s/t
v=200km/3hr
v=66.6km/hr
