A heater marked 60W evaporates
6x10-³ kg
of boiling water in 60 seconds. What is the
specific latent heat of vaporization of water in
Jkg

Answers

Answer 1

Answer:

L = E / M         energy input / water evaporated     (J/kg)

E = 60 J / s          60 J input in 1 sec

L = 60 J / (.006 / 60) kg = 600,000 J / kg

Answer 2

The specific latent heat of the vaporization of water is 6×10⁵ J/kg.

The amount of heat required to evaporate a certain mass of water can be calculated using the formula:

Q = ml

where Q is the heat required, m is the mass of water evaporated, and l is the specific latent heat of vaporization of water.

In this problem, we know that a heater with a power output of 60W evaporates 6x10⁻³ kg of boiling water in 60 seconds. We can calculate the amount of heat supplied by the heater using the formula:

Q = Pt

where P is the power of the heater and t is the time for which it is operating. Substituting the given values, we get:

Q = 60 W × 60 s

Q = 3600 J

We can now calculate the specific latent heat of the vaporization of water by rearranging the formula:

l = Q/m

Substituting the given values, we get:

l = 3600 J / (6×10⁻³kg)

l = 6×10⁵ J/kg

Therefore, the specific latent heat of the vaporization of water is equal to 6×10⁵J/kg.

To learn about specific heat  click:

https://brainly.com/question/11297584

#SPJ2


Related Questions

Write a paragraph describing three characteristics that scientists can use to classify stars using the terms "main sequence, spectrum, and light year".

Answers

The terms "main sequence, spectrum, and light year" are discussed here.

What are main sequence, spectrum, and light year?

Any star with a hot, dense core that burns hydrogen into helium to produce energy is said to be in the main sequence. The majority of stars in the galaxy are main-sequence stars, including the Sun, Tau Ceti, and Alpha Centauri A.

The temperature, chemical make-up, and inherent luminosity of a star are all revealed in the spectrum. A series of photos taken at different wavelengths of the slit in the star's light make up spectrograms obtained with a slit spectrograph.

The distance light travels in a year is measured in light-years.

Learn more about light-years here:

https://brainly.com/question/1302132

#SPJ1

A brick i liding to the right on a horizontal urface. What are ome direction of the two urface force the friction force of the normal force

Answers

The two surface forces acting on the brick would be the friction force and the normal force.

What is surface?

Surface is a term used to describe the physical outer layer of an object or material. It can refer to the visible top layer of soil in a garden, the outside of a plant, an animal's skin, the outer layer of a building, or the exterior of a vehicle. In the world of science, the term surface can refer to the outermost layer of a solid object or material, the boundary layer where the properties of the material change abruptly. Surface can also refer to a surface area, which is the total area of a two-dimensional object. Surface area is important because it affects the amount of heat, light, or sound that is absorbed, reflected, or transmitted.

To learn more about surface

https://brainly.com/question/30013277

#SPJ4

Complete the sentence by putting a cross () in the box next to your answer.
The work done by the brakes during braking is equal to
A the energy transferred
B the stopping distance
C the acceleration
D the thinking distance plus braking distance

Answers

Answer:

I hope its this one

A the energy transferred ()

A wheel is turning at -2. 00 rad/s.

After 8. 25 s, it has a displacement

of +7. 25 rad. What was its angular

acceleration?

(Unit rad/s^2)

Remember: CCW is +, CW is -. 1 rev = 2*pi rad

Answers

The angular acceleration of the turning wheel that has a displacement of 7.23 rad is 0.27 rad/s².

The term "angular acceleration" refers to the rate at which the angular velocity of an item changes over time in rotational motion. It is a way to gauge how quickly an object's rotational motion is accelerating or decelerating. Similar to linear acceleration, which depicts variations in linear velocity, is angular acceleration.

Given:

Angular speed, ω  = -2 rad/s

Time, t = 8.25 s

Angular displacement, θ = 7.25 rad

The angular acceleration is given by:

θ = ω + ¹/₂αt²

7.25 = -2 + ¹/₂ (α) (8.25)²

7.25 = -2  +  34.03α

34.03α = 9.25

α = 9.25 / 34.03

α = 0.27 rad/s²

Hence, the angular acceleration of the turning wheel that has a displacement of 7.23 rad is 0.27 rad/s².

To learn more about Angular acceleration, here:

https://brainly.com/question/17123770

#SPJ12

How much work must be done to stop a 1215 kg car moving at 100 km/h in a straight path?

Answers

Answer:

Work done = 466.128 KJ

Explanation:

We can solve this question using the work-energy theorem

Given,

Velocity = 100km/hr = 27.7 m/s (Approx)

Mass = 1215 kg

Initial velocity = 0

Work done =  1/2 m[tex](v-u)^{2}[/tex]

                    = 1/2*1215 * 27.7*27.7

                     = 466.128 KJ

For neat explanation you can refer to the attachment

Where is the kinetic energy of a roller coaster at its highest answer?.

Answers

The kinetic energy of a roller coaster is at its highest at the bottom of the drop, the lowest position. This can be explained by the conservation of energy.

What is law of conservation of energy?

The principle of conservation of energy states that "The total energy is neither increased nor decreased in any process. Energy can be transformed from one form to another, and transferred from one object to another, but the total amount remains constant."

In the same way, the Conservation of Mechanical Energy states that the total mechanical energy of a system is conserved. It can be expressed as

E₁ = E₂

½mv₁ + mgh₁ = ½mv₂ + mgh₂

Where

E₁ = mechanical energy at point 1E₂ = mechanical energy at point 2m = mass of an objectv₁ = velocity of object at point 1v₂ = velocity of object at point 2h₁ = height of object at point 1h₂ = height of object at point 2

At the lowest position of a roller coaster, the height is zero. If we count the energy change from the highest position where the velocity is zero, we get the equation

½mv₁ + mgh₁ = ½mv₂ + mgh₂

½m(0) + mgh₁ = ½mv₂ + mg(0)

mgh₁ = ½mv₂

U₁ = KE₂

There is only kinetic energy at the lowest position of the roller coaster.

Learn more about energy of a roller coaster here:

brainly.com/question/30265775

#SPJ4

Missy diwater, the former platform diver for the ringling brother's circus, had a kinetic energy of 12 000 j just prior to hitting the bucket of water. If missy's mass is 40 kg, then what is her speed?.

Answers

Missy diwater, the former platform diver for the ringling brother's circus, had a kinetic energy of 12 000 j just prior to hitting the bucket of water. If Missy's mass is 40 kg, then her speed is: 24.49 m/sec

What is kinetic energy?

The energy of motion, or kinetic energy, may be seen in the movement of an item or subatomic particle. Kinetic energy can be discovered in every moving object and particle. Kinetic energy is generated when anything moving, such as a person walking, a baseball rising through the air, a piece of food dropping from a table, or a charged particle in an electric field. The object's squared velocity determines the kinetic energy. As a result, an object's kinetic energy quadruples when its velocity doubles. Kinetic energy is divided into five kinds radiative, thermal, sound, electrically, and mechanic.

Given that,

kinetic energy = 12000 J

m = mass = 40 kg

v = velocity m/s

Kinetic energy of an object can be expressed in terms of its mass m and velocity v as:

K.E = 1/2 × m × v²

or, 12000 = 1/2 × 40 × v²

or, v² = 600

or, v = √600
or, v = 24.49 m/sec

To know more about Kinetic energy refer to:

https://brainly.com/question/8101588

#SPJ4

A wave in which particles of the medium undergo a circular motion is known as a blank wave.
A. Longitudinal
B. Pitch
C. Standing
D.Trasverse

Answers

None of the above is right option for the same. A wave in which particles of the medium undergo a circular motion is known as a Surface wave.

A surface wave is a wave in which the medium's particles move in a circular pattern. Surface waves are neither transverse nor longitudinal. All of the particles in the bulk of the medium travel parallel to and perpendicular to the direction of energy transport in longitudinal and transverse waves, respectively.

Only the particles at the medium's surface move in a circular motion during a surface wave. As one moves farther away from the surface, the mobility of the particles tends to slow down.

Every wave that travels across a medium has its origin. One of the particles was initially displaced somewhere along the medium.

It is typically the first coil on a slinky wave that is moved by a person's hand. The first air particle to vibrate during the creation of a sound wave is often caused by the vocal chords or a guitar string. The particles that are displaced from their equilibrium position at the point where the wave is introduced into the medium always move in the same direction as the vibration's source.

To learn more about Circular motion from given link

https://brainly.com/question/2762829

#SPJ1

two objects are “r” distance apart and experience an afghan equal to 15 N. What must we modify their distance by to experience an Fg of 135 N

Answers

The new distance between the two objects should be r/3 units to have the attractional force of 135 N

What is Gravitational force?

The gravitational force, which is what pushes mass-containing objects toward one another. We frequently consider the pull of gravity from the Earth. Your body is kept on the ground by this force. However, all mass-bearing objects are pulled toward one another by gravity.

The gravitational pull between two masses Ocean tides rise and fall due to the moon's gravitational pull. of or pertaining to a strong inclination or movement in the direction of something or someone: There has been a lot of research on why they gravitate toward harmful conduct.

Gravity is a basic interaction that causes all objects with mass or energy to attract one another.

Let the masses be M and m kg

The distance is given as'r'

So when the distance is 'r'

GMm/r² = 15

Now when the distance is modified to z

GMm/z² = 135

The ratio of the two

(GMm/z²)/(GMm/r²) = 135/15

⇒r²/z² = 9

⇒z = r/3

The new distance between the two objects should be r/3 units to have the attractional force of 135 N

To learn more about Gravitational Force refer to :

https://brainly.com/question/14931141

#SPJ1

What do you call the process of escaping molecules from the surface of a liquid at any temperature?.

Answers

The process of escaping molecules from the surface of a liquid at any temperature is known as Evaporation.

When a liquid turns into a gas, this is referred to as evaporation. In these examples, the liquid water is evaporating into a gas known as water vapour rather than disappearing.

On a global scale, evaporation occurs. Evaporation, along with condensation and precipitation, is one of the three major steps in the Earth's water cycle. Evaporation accounts for 90% of the moisture in the Earth's atmosphere, with plant transpiration accounting for the remaining 10%.

Matter exists in three states that is solid, liquid and gaseous state. Evaporation is just one way for a substance, such as water, to transition between these states.

Learn more about states of matter here:

https://brainly.com/question/29069107

#SPJ4

What force depends on?.

Answers

Force depends on two main factors: mass and acceleration.

According to Newton's second law of motion, force is equal to the mass of an object multiplied by its acceleration. This means that a more massive object will require more force to accelerate, while a less massive object will require less force. Additionally, the greater the acceleration, the more force will be required to achieve it. This is why a car going 60 mph requires more force to stop than a car going 30 mph.Understanding the relationship between force, mass, and acceleration is crucial in understanding how objects move and interact in the world around us.

To learn more about force:

https://brainly.com/question/17820837

#SPJ4

A physics demo launches a ball horizontally while dropping a second ball vertically at exactly the same time.

Answers

Both the balls hit the ground at the same time because their initial velocity( = 0) & acceleration towards the ground is same(g = 9.8m/s²)

What is acceleration?

The measurement of change in an object's velocity is known as acceleration. When you press the gas pedal in a car, it surges forward at an increasing rate. Acceleration is the change in velocity.

The formula for calculating acceleration is as follows:

Acceleration = (Velocity Change)/ (change in time)

The standard unit of acceleration measurement is metres per second squared (m/s2). This is calculated using the above formula, where velocity is measured in metres per second and time is measured in seconds.

In physics, acceleration has both a magnitude (the m/s2 number we discussed earlier) and a direction. As a result, acceleration is now a vector.

Learn more about acceleration

https://brainly.com/question/12550364

#SPJ4

Complete question:

A physics demo launches a ball horizontally while dropping a second ball vertically at exactly the same time. [Delayed Feedback] 1) Which ball hits the ground first?

What i your view on when the baby i alive? What tandard or tandard are you uing to form your opinion?

Answers

My understanding of the concept of when a baby is considered alive is based on the medical, legal, and ethical standards provided by the scientific and medical communities, and it is not based on personal beliefs or opinions.

The determination of when a baby is considered alive is a complex and nuanced issue that is influenced by a variety of factors, including medical, legal, religious, and ethical considerations.

Therefore, it is important to consult with qualified professionals in each area to gain a better understanding of this topic.

For more questions like Baby click the link below:

https://brainly.com/question/30262310

#SPJ4

Complete Question:

What I your view on when the baby I alive? What standard or standard are you using to form your opinion?

How many aneuploid gametes are produced from a nondisjunction event in meiosis II?.

Answers

Two gametes will be produced by meiosis II, which will have unequal number of chromosomes.

A nondisjunction event during meiosis II results in the production of two aneuploid gametes. Nondisjunction is a type of error that occurs during meiosis, the process by which cells divide to produce sperm and egg cells. During meiosis, chromosomes first replicate and then line up in pairs along the center of the cell. Then, the pairs of chromosomes are pulled apart, one to each of the two new cells, ensuring that each cell gets one copy of each chromosome. Nondisjunction occurs when chromosomes fail to separate properly, resulting in one daughter cell receiving an extra copy of a chromosome, while the other daughter cell is missing a copy. In the case of meiosis II, this means that the two gametes produced will have an unequal number of chromosomes. One gamete will have an extra copy of a particular chromosome, while the other gamete will be missing a copy of that chromosome. These gametes are called aneuploid because they have an abnormal number of chromosomes.

Aneuploidy can have serious consequences, as the extra or missing chromosomes can disrupt the normal genetic makeup of the organism. Aneuploidy in sperm or egg cells can lead to the formation of genetically unbalanced zygotes when fertilization occurs, which can result in various genetic disorders and developmental abnormalities. For example, Down syndrome, a common chromosomal disorder, is caused by an extra copy of chromosome 21. Similarly, Turner syndrome is caused by the absence of one X chromosome in females, resulting in a total of 45 chromosomes.

In summary, a nondisjunction event in meiosis II results in the production of two aneuploid gametes, each with an abnormal number of chromosomes, which can lead to various genetic disorders and developmental abnormalities.

Learn more about meiosis II here:

https://brainly.com/question/10621150

#SPJ4

PLOT A GRAPH OF L AGAINST T² AND DETERMINE THE SLOPE​

Answers

The measured value of g is determined by the slope of the  time period T² vs. l graph (acceleration due to gravity).

Time period the amount of time that a behavior lasts or a condition persists. Depending on the type of activity or situation under consideration, it may be measured in seconds or in millions of years.

the duration T as determined by the formula T = 2π √(l/g). The pendulum's length, l, is indicated here.

The result of squaring both sides is  T² = 4π² l/g

42 and g are constants, thus

⇒ T² = ml

The slope of the T² vs l graph in this case is m. The slope's value is m =  4π²/g

We can determine the value of g from the slope of the graph by substituting π = 10 in the equation above.

g = 40/m

To learn more about Time period from given link

https://brainly.com/question/28570026

#SPJ1

lenore is on an inclined plane next to her truck. holding her hands steady, she pushes a box up the plane and into her truck. where can energy be lost?

Answers

The energy can be lost in the of heat energy, kinetic energy and potential energy. If lenore pushes a box up the plane and into her truck.

First of all "energy lost" is an inappropriate word used here. Energy can neither be lost nor be generated. It only transforms from one form to another.

The plane on which the box is being pushed up is inclined. There are different types of energy transformation takes places. Firstly muscular force and thereby energy is transfer to the kinetic energy, then this kinetic energy gets transfer partially into heat energy and partially into potential energy. Heat energy is generated due to the friction of the inclined surface, and potential energy is generated due to the height of the box above ground surface.

To  know more about kinetic energy, here

https://brainly.com/question/26472013

#SPJ4

PLEASE HELP!!! A 3000 kg car is moving east at 15 m/s with
another 2200 kg car moving west at 10 m/S
If the 2 cars collide and stick together, what speed and direction will they travel?

Answers

Explanation:

m1u1+m2u2=m1v1+m2v2

(3000×15)+(2200×-10)=(3000×v)+(2200×v)

45000-22000=5200v

23000=5200v

v=230/52

v=4.423m/s to the east.

What is the volume of the sphere? 12 centimeters cubed 24 centimeters cubed 36 centimeters cubed 54 centimeters cubed.

Answers

The volume of the sphere is  41.89 centimeters cubed.

What is sphere?

A sphere is a three-dimensional shape that is made up of all points that are the same distance from the center. It is a perfectly round, symmetrical object that looks the same from any angle. A sphere is one of the most basic shapes in geometry and is found in many everyday objects. A soccer ball, basketball, and even a globe are all examples of spheres. The surface of a sphere is called a spherical surface and has no edges or vertices.

The volume of a sphere is calculated using the formula V = 4/3 * π * r^3, where r is the radius of the sphere. In this case, the radius of the sphere is 12 centimeters, so the volume would be 4/3 * π * 12^3 = 4,188.8 cubic centimeters, which is equivalent to 41.89 cubic centimeters. Therefore, the answer is 41.89 centimeters cubed.

To learn more about sphere

https://brainly.com/question/30271191

#SPJ4

a form of energy conversion that captures heat energy from within Earth

Answers

A form of energy conversion that captures heat energy from within Earth is Geothermal Energy.

Geothermal energy is heat energy from the earth—Geo (earth) + thermal (heat). Geothermal resources are reservoirs of hot water that exist or are human made at varying temperatures and depths below the Earth's surface. Geothermal energy is the thermal energy in the Earth's crust which originates from the formation of the planet and from radioactive decay of materials in currently uncertain but possibly roughly equal proportions. Geothermal energy is a type of renewable energy taken from the Earth's core. It comes from heat generated during the original formation of the planet and the radioactive decay of materials. This thermal energy is stored in rocks and fluids in the centre of the earth.

Learn more about Geothermal Energy

brainly.com/question/1061324

#SPJ4

PART ONE
A merry-go-round rotates at the rate of 0.24 rev/s with an 71 kg man standing at a point 2.7 m from the axis of rotation.
What is the new angular speed when the
man walks to a point 1 m from the center?
Consider the merry-go-round is a solid 79 kg cylinder of radius of 2.7 m.
Answer in units of rad/s.

PART TWO
What is the change in kinetic energy due to this movement?
Answer in units of J.

Answers

Answer:

In order to answer this correctly I will need the answers to the question

Explanation:

I can then work it out and give you the best answer I can give you

What are the two types of rate laws?.

Answers

Rate laws can be represented as a differential rate law, which describes the change in reactant or product concentrations as a function of time, or as an integrated rate law, which describes the actual concentrations of reactants or products as a function of time.

What is the distinction between differential and integrated rate law?

The differential rate law describes how the rate of a reaction varies with the concentration of the reactant (s). The integrated rate law describes how the concentration of the reactant(s) changes over time.

Integration of the relevant differential rate laws yields integrated rate laws. The rate constants for those rate laws are calculated using concentration measurements taken at various points throughout the process.

learn more about Rate laws

https://brainly.com/question/16981791

#SPJ4

A car accelerated to 10m/2 after being rear-ended by a truck. The car and it occupant have a ma of 1300kg. How much force did the truck place on the Uber car?

Answers

Therefore, the truck placed 6500 Newtons of force on the Uber car after rear-ending it.

What is the force ?

Force is an influence that causes an object to undergo a certain change. It can be described as a push or pull, which can cause an object to start moving, stop moving, speed up, slow down, or change direction. Forces can be caused by many different types of interactions, including those between objects, between objects and fields, and between fields. Examples of forces include gravity, friction, magnetism, and electric forces. Forces are measured in Newtons (N).

The force placed on the Uber car can be calculated using Newton's Second Law of Motion, which states that force is equal to mass times acceleration (F = ma).

In this example, the force placed on the Uber car can be calculated as follows:

Force = Mass x Acceleration

Force = 1300 kg x 10m/2

Force = 6500 N

Therefore, the truck placed 6500 Newtons of force on the Uber car after rear-ending it.

To learn more about force

https://brainly.com/question/12785175

#SPJ4

When the torque is minimum and maximum?.

Answers

When the magnetic dipole is at a right angle to the applied magnetic field, or when theta = 90, the torque is maximum. When the torque is zero, or when = 0, the minimum torque is anticipated.

The torque is smallest when the magnetic dipole is oriented parallel to the direction of the applied magnetic field. Torque is a velocimetric quantity. The direction of the torque vector is determined by the force acting on the axis. Everyone who has ever opened a door has an  understanding of torque. To open a door, one pushes on the side that is farthest. Torque is a quantity that can be thought of as the cross product of force and distance. The Newton metre, is the torque unit in the SI system (m2*kg*s^2).

Learn more about torque here

https://brainly.com/question/6855614

#SPJ4

Is magnitude equal to direction?.

Answers

The magnitude doesn't equal to direction. The magnitude of the vector is its length, while the direction indicates which way the vector points.

The answer to "how much?" is magnitude, and the answer to "which way?" is direction. 5 meters is a magnitude, and North is a direction. The vector quantity 5 meters north has both magnitude and direction. Some quantities in physics (known as vector quantities) are affected by their orientation, but others are not (called scalar quantities).

For example, if a friend is throwing a party and you need directions, knowing 5 miles isn't enough; you also need to know which direction to travel. If, on the other hand, you're bringing juice to the party and she tells you to bring 10 bottles, that's all the information you need; the amount of juice doesn't need to be specified.

Learn more about magnitude here: https://brainly.com/question/24468862

#SPJ4

If zebra mussels were introduced to a new lake, what would be the most likely result?

Answers

Answer:

excessive growth of algae that kills other organisms

Explanation:

if they eat more than it would delete the algea levels. This is should be right.

If zebra mussels were introduced to a new lake, the most likely result would be a rapid increase in their population, resulting in a decrease in the native species. Zebra mussels are very successful invaders, as they reproduce quickly and can outcompete other species for food and resources. They can also clog water intake pipes and harm native fish populations by consuming their food sources.

How did anders celsius devise the temperature scale?

Answers

Anders celsius devise the temperature scale using a mercury thermometer.

The Celsius temperature scale, which measures heat or cold, from 0° for frozen water, to 100° for boiling water, was invented by Anders Celsius, a Swedish astronomer, in 1742. He named the scale the centigrade scale, and people may occasionally still see temperatures listed with this term. In 1954, however, scientists officially named the temperature scale after the astronomer to honor his work.The original scale differs from the modern use of Celsius. The creator set 0 as the boiling point of water and 100 as its freezing point. This was reversed shortly after his death to the more modern usage.One of the advantages of the modern scale is that the calculations from 0 to 100 are far easier than Fahrenheit calculations.In modern times, most countries use Celsius measurements, not simply for the weather, but for temperature measurements in baking and other applications. Scientists throughout the world use a combination of this scale and Kelvin measurements. The Kelvin scale is based on the fixed points of absolute zero, where nothing could be colder, and all matter solidifies, and the triple point of water, where gas, liquid and solid water are equally used. This scale is particularly useful for discussing extreme temperatures.

To know  more about temperature visit:

https://brainly.com/question/5121135

#SPJ4

what is created when light is refracted in a rainstorm?

Answers

Answer: It form Rainbow

What is Rainbow ?

--A rainbow is a meteorological phenomenon that is caused by reflection, refraction and dispersion of light in water droplets resulting in a spectrum of light appearing in the sky.

-- It takes the form of a multicoloured circular arc.

What is Refraction ?

-- Rainbows are formed when light from the sun is scattered by water droplets (e.g. raindrops or fog) through a process called refraction.

--Refraction occurs when the light from the sun changes direction when passing through a medium denser than air, such as a raindrop.

What is reflection?

--The return of light or sound waves from a surface. :

--the production of an image by or as if by a mirror.

Learn more about dispersion from https://brainly.in/question/108129

#SPJ4

a 12 v battery is connected to two resistors in series, r1 and r2. the voltage across r1 is 7 v. what is the voltage across r2?

Answers

The voltage across R2 calculated by taking the difference is 5 V.

We know that the total voltage of a battery is equal to the sum of the voltages across each resistor in a series circuit.

Voltage =Vr1 + Vr2

Voltage = 12 V

Voltage across R1 = 7 V

Therefore,

Voltage across R2 = Voltage - Voltage across R1

Voltage across R2 = 12 V - 7 V = 5 V

It's important to note that in a series circuit, the same current flows through each resistor. Therefore, the voltage across each resistor is inversely proportional to its resistance. In other words, the resistance of R2 is greater than R1, so the voltage across R2 is less than the voltage across R1.

For more questions like Resistor click the link below:

https://brainly.com/question/22490534

#SPJ4

a type of reaction that produces an increase in temperature is called?

Answers

Answer: Exothermic

Explanation:

An exothermic reaction causes an increase in temperature. This is because the energy released when the bonds are broken among the reactants is greater than than the energy absorbed when new bonds are formed among the products. This leftover energy gets passed along to the surroundings, where it produces a measurable increase in heat.

Is momentum infinite in space?.

Answers

As a result, there is almost no friction in space to slow moving objects. A ship in space, unlike a ship on the water, does not require constant thrust to keep moving forward. After the engines are turned off, the momentum of a space ship will continue to propel it forward indefinitely at a constant speed.

What is momentum?

Momentum is defined as a body's amount of motion. It is measured by "mass velocity," since velocity and the direction of the body's motion impact momentum. Momentum is a vector quantity since velocity is a vector and mass is a scalar variable. Momentum is defined as the product of mass and velocity. Momentum is a body's "power" while it moves, indicating how much force it can exert on another. A bowling ball (large mass) traveling slowly (low velocity), for example, can have the same momentum as a baseball (small mass) thrown quickly (high velocity).

Here,

As a result, almost no friction exists in space to slow moving objects. Unlike a ship on the water, a ship in space does not require constant thrust to keep moving forward. After the engines are turned off, a space ship's momentum will continue to propel it forward at a constant speed indefinitely.

To know more about momentum,

https://brainly.com/question/20290738

#SPJ4

Other Questions
The manufacturer ofa new convection oven claims that his productwill bake things 25 percent faster than a con-ventional oven that relies mainly on radiation.How could you test this claim? Jacob walks 2/5 kilometres in 1/4 hour. what is jacobs speed in kilometres per hour? name the following compound. group of answer choices 2,5-dibromobenzene 3,6-dibromobenzene 1,4-dibromobenzene 2,5-dibromocyclohexene 1,4-bromocyclohexene I drove 10 mile north 14 mile eat 16 mile north 2 mile eat 4 mile north how far am I I was listening to how some people can get married in a castle if they want an old-fashioned yet traditional setting for their ceremony. Medieval castles offer unique activities. As we walked down the long halls I noticed pictures of horses on the wall right before I raised my hand my classmate sally then ask '' if the knights wear armor does the horse wears armor to?'' The person in charge of the guide then answered and said "of course they have to not to get injured as the jousting events happens.'' and was still was rambling on how we could try on the amour and try the medieval style when you sign up to be a student at the Tower of London. . I still raised my hand to ask '' when was the jousting tournament?'' The guider explained when was the first jousting tournament of Dover Castle in Kent, England held its first ever jousting tournament. In August 2017. I read in one of my books before coming here to know a little before discovering other information which i knew that four of the best knights would come from different countries to battle and be watched by spectators. Build conflict to characters Members of Generation Z are most likely to influence : A.furniture design B. health care and insurance C.retirement plans. D. e-textbooks fill in the blank. one of the empowering resources that you develop by studying public speaking is___, or the ability to listen and analyze information you hear so that you can judge its accuracy and relevance. 60% of tudent like wimming, 40% like dancing, 20% of tudent that like wimming like dancing , how many tudent don't like wimming On the phylogenetic tree, which of the following pairs are most closely related?1) Cyanobacteria and Fungi2) Gram positive bacteria and animals3) animals and slime molds4) slime molds and spirochetes How does the extended metaphor help the reader better understand the poem's message?. How to find period with two midlines picture is below 20,45,70,97 25th term Drawing and Painting PicturesOn Flat Surfaces is called if allowance for doubtful account has a credit balance of 2800 in the trial balance journalize the adjusting entry at december 31 assuming uncollectibles are expected to be 12% of accounts receivable When multiple teams are working together, each team should maintain a separate Product Backlog. TRUE. FALSE. Consider the reaction shown.4HCl(g)+O2(g)2Cl2(g)+2H2O(g)Calculate the number of grams of Cl2 formed when 0.460 mol HCl reacts with an excess of O2 . which of the following is the best example of a conditioned reinforcer? * 1 point a cold root beer for mowing the lawn on a hot day pudding for eating all your peas at supper termination of shock after removing one's finger from a live electric wire a spanking for eating cookies before dinner applause for an excellent piano recital which of the following is closest to the prob that the total weight of 3 randomly selected grapefruits is more than 3.4 pounds ANSWER THE QUESTIONS WITH STEPS FOR BRAINLESS the last answer choice on number 7 is (c) I dont know Green plants are important because:they use photsytnhesis they use carbon dixiode