a heavy ball is hung with a string from the ceiling. another string is attached to the bottom of the ball. a downward pulling force is exerted on the lower string as shown in the figure below. which of the following statements is true? a. if the lower string is pulled suddenly by a large force, the upper string will break first. b. if the lower string is pulled suddenly by a large force, the lower string will break first. c. if the lower string is pulled suddenly by a large force, the two strings will break at the same time. d. if the lower string is pulled by a slowly increasing force, the lower string will break first. e. if the lower string is pulled by a slowly increasing force, none of the string will eventually break.

The strength of the Sun's gravitational field at this distance is [tex]0.622m/s^2[/tex]

A gravitational field is defined as the model used to explain the effects that a massive body exerts in the space around it exerts a force on another massive body. Therefore, a gravitational field is used to explain gravitational phenomena, and it is measured in newtons per kilogram.

The acceleration due to gravity on the surface of the earth is given by;

[tex]g = GM/R^2[/tex]

Where, g is the acceleration due to gravity

G  is Gravitational constant [tex](6.673 * 10^-^1^1 Nm^2 kg^-^2)[/tex]

M is the mass of the planet [tex](1.99* 10^3^0 kg)[/tex]

R is the radius of planet

So, for above given information, [tex]g= \frac{6.022 * 10^-^1^1* 1.99* 10^-^3^0}{(1.46* 10^1^1)^2}[/tex]= [tex]0.622m/s^2[/tex]

Thus, the strength of the Sun's gravitational field at this distance is [tex]0.622m/s^2[/tex].

Learn more about Gravitational force, here:

https://brainly.com/question/12324569

#SPJ1

The largest momentum transferred to the skater is the skater catches the Frisbee, holds it momentarily, and throws it back to her friend.

The skater stands on a frictionless surface and his friend Frisbee starts moving behind him. The lack of friction makes the skater unstoppable.

However, when the skater returns to his friend through the Frisbee again, there is a backward force that increases the skater's speed. So and momentum is directly proportional to velocity, so as velocity increases so does momentum.

In Newtonian mechanics, momentum (more precisely, linear or translational momentum) is the product of an object's mass and velocity. A vector quantity that has magnitude and direction. If m is the object's mass and v is its velocity (which is also a vector quantity), then the object's momentum p is p = mv.

Advanced formulations of classical, Lagrangian and Hamiltonian mechanics allow the choice of coordinate systems containing symmetries and constraints. In these systems the conserved quantity is the generalized momentum, which is generally different from the momentum defined above. The generalized concept of momentum carries over into quantum mechanics and becomes the operator of the wavefunction. The momentum and position operators are related by the Heisenberg uncertainty principle.

Learn more about Momentum:

https://brainly.com/question/24030570

#SPJ4

Suppose exactly 6.95 g of each reactant is taken and the following details are given by A and B then 6.95 g of A is equivalent to 6.95/molar mass of A moles of A. 6.95 g of B is equivalent to 6.95/molar mass of B moles of B.

To determine which reactant is limiting, we need to compare the amount of each reactant to the stoichiometry of the reaction.

The stoichiometry of the reaction is 1:2 for reactants A and B, respectively.

Therefore, if we have 6.95 g of A and 6.95 g of B, we can calculate the ratio of A to B to determine which reactant is limiting.

6.95 g of A is equivalent to 6.95/molar mass of A moles of A.

6.95 g of B is equivalent to 6.95/molar mass of B moles of B.

Comparing the moles of A and moles of B, we can see that A is limiting, as there is less A than required by the stoichiometry of the reaction.

To determine the mass of the excess reagent (B) that will remain after the limiting reactant (A) is consumed, we need to calculate the moles of B that are in excess.

We can calculate the moles of B that are used up by the reaction (based on the stoichiometry of the reaction) and subtract this from the total moles of B that were initially present.

The remaining moles of B can then be converted back into grams to find the mass of B that will remain.

Using the above method, the mass of the B remaining after A is consumed can be calculated.

To learn more about stoichiometry refer:

https://brainly.com/question/30215297

#SPJ4

The stiffness is 0.21 N/m and frequency is 2.84 Hz.

The effective spring constant k of the web can be determined as follows:

Stiffness is defined as the resistance to forces that bend a component. Firmness is very important to the end-use performance of many papers.

[tex]F= \frac{1}{2pi} \sqrt{\frac{k}{m} }[/tex]

k= 4 pi²f²m

= 0.21875 N/m

The frequency of the web's oscillations can be determined as follows: The frequency of a repeated event is its number of instances per unit of time. It differs from angular frequency and is sometimes referred to as temporal frequency for clarification. The unit of frequency is hertz (Hz), or one occurrence per second.

[tex]F= \frac{1}{2pi} \sqrt{\frac{0.21}{0.56 g} }[/tex]

= 2.84 Hz

Learn more about Stiffness

https://brainly.com/question/19275243

#SPJ4

If we drop 2 objects of different weights from the same height, both of them will reach the ground at the same time.

Gravity, at the surface of a body like Earth, provides an acceleration to bodies and this acceleration is constant and its value is equal to 9.8m/s².  This is because the Earth attracts big objects more than little ones, but the big ones have more inertia, which cancels out. So, all the bodies on the earth's surface fall at the same acceleration of 9.8m/s²

This acceleration due to gravity,g is independent of the mass of the body. The time of flight for any freely falling object depends on the value of acceleration due to gravity and its initial speed. So both the bodies reach the ground at the same time.

For further information about acceleration due to gravity, refer to the link:

https://brainly.com/question/3198512

#SPJ4

The angular velocity of a rotating object is 2.1 rad/s. So option A is correct.

It is defined as the rate of change of its angular position, and it is measured in units of radians per second (rad/s).

The angular velocity of a rotating platform can be calculated using the formula: angular velocity = 2 * pi * (frequency of rotation)

Frequency of rotation = 1 / time for one complete rotation = 1 / 3 sec = 0.33 Hz

Therefore, the angular velocity of the platform is 2 * pi * 0.33 Hz = 2.09 rad/s

The answer is closest to A 2.1 rad/s

To know more about angular velocity:

https://brainly.com/question/20432894

#SPJ4

The sum of all the kinetic and potential energies of a system's constituent pieces is the total energy of the system.

To learn more about total energy refer to:

https://brainly.com/question/788588

#SPJ4

Correct options are the gravitational force is inversely to proportional to the distance, and the electrical force is inversely proportional to the square o the distance.

Electrical force is the force that is exerted on charged particles due to the presence of other charged particles. It is a fundamental force of nature, and it is one of the four fundamental forces of physics, along with the strong nuclear force, the weak nuclear force, and the gravitational force. Electrical force is responsible for the behavior of charged particles in electric and magnetic fields, and it is the force that holds atoms and molecules together. The electrical force is mediated by the exchange of virtual photons.

Both gravitational and electric forces, according to Coulomb's law, decrease with the square of the distance between the objects, and both act along a line between them. However, in Coulomb's law, the magnitude and sign of an object's electric force are determined by its electric charge rather than its mass. Charge thus governs how electromagnetism influences the motion of charged objects.

[tex]$ F = k \frac{q_1q_2}{r^2}[/tex]

F = electric force

k = Coulomb constant

q₁, q₂= charges

r = distance of separation

And

[tex]$F=G{\frac{m_1m_2}{r^2}}[/tex]

F = force

G = gravitational constant

m₁ = mass of object 1

m₂ = mass of object 2

r = distance between centers of the masses

To know more about gravitational force visit:

https://brainly.com/question/12528243

#SPJ4

The complete question is given below:

According to the solving  the value of average speed m =5 and value of n =2.

The average speed is the total distance it travels in a predetermined amount of time. The typical speed is represented by a scalar value. It is characterised by the magnitude and lacks direction.

150 million kilometers separate the planet from the sun.

We are aware that a million

= 10^6 and 1 km= 10^3 m

Hence,

150 million km = 150× 10^6 ×10^3 metre=150×10^9 m

                                                                                 =1.5×10^11 m

The speed of light in a vacuum is 2.999... m/s, which is roughly equivalent to 3.0 108 m/s.

Calculating the time it takes for the light beam to travel from the sun to Earth is demanded of us.

we know that average velocity v = distance/time

                                                      Time ⇒ distance/velocity

Here distance=1.5×10^11 m and v=c= 3.0×10^8 m/s

                           hence time

                                                         =0.5×10^3 s

                                                           =5.0×10^2 s

m10n [where m is the magnitude and n is the power of 10] is the proper way to write a scientific notation.                                                  

Hence the value of m =5 and value of n =2

To know more about average speed visit:

https://brainly.com/question/12322912

#SPJ4

The percentage at which the transferred electrons change the mass of the penny is [- (n x 9.1 x 10⁻³¹)/m] x 100 .

The deficiency  or excess  of electrons in an atom leads to the development of charge.

The total mass of coin after loosing electrons is calculated as follows;

= m - (n x 9.1 × 10⁻³¹ ) Kg

where;

There will be decrease in the mass of the penny.  So the amount of decrease in mass will be;

= final mass - initial mass

= m - (n x 9.1 × 10⁻³¹ ) - m

= - (n x 9.1 ×10⁻³¹ )

This negative sign indicates that the mass has decreased.

The percentage decrease in the amount of mass transferring the electrons is calculated as;

[- (n x 9.1 x 10⁻³¹)/m] x 100    

Learn more about percentage of charge here: https://brainly.com/question/15021198

#SPJ1

Dialogic communication is the open sharing of ideas in an atmosphere of respect (in order to achieve understanding between the speaker and listener(s).

Dialogic communication is a method of communication that promotes dialogue between a speaker and their audience. In presenting their ideas to an audience, dialogic communication encourages speakers to be assertive (calm, respectful, and open). The dialogic theory is founded on three guiding principles: Monologue is less natural than dialogue. Meaning is found in people, not words. Perceived meanings are influenced by contexts and social situations (Bakhtin, 2001a; Bakhtin, 2001b). Mutuality, propinquity, empathy, risk, and commitment are the five principles underlying dialogic theory (Kent & Taylor, 2002). Mutuality is defined by an orientation toward inclusion or collaboration, as well as a spirit of mutual equality. Mutuality has two characteristics: collaboration and a spirit of mutual equality.

Here,

Dialogic communication is the open exchange of ideas in a respectful environment (to achieve understanding between the speaker and listener) (s).

To know more about Dialogic communication,

https://brainly.com/question/8897240

#SPJ4

Uneven heating patterns Uneven heating causes Hadley cells, which disperse heat; convection currents, which redistribute heat; wind currents, which redistribute heat; and ocean currents, which redistribute.

If you have access to natural gas as a heating source where you live, it will probably end up being the least expensive way of heat a house. Despite price increases, natural gas remains the most affordable space heating option. Electricity, gas, and heating oil are next, going from the next least expensive from the most expensive.

The most effective type of house heating is a heat pump. Their biggest flaw is that they don't work well at extremely high or low temperatures. You can require space heaters all over your house during extremely cold weather, which reduces efficiency.

To know more about heating visit:

https://brainly.com/question/8348313

#SPJ4

The best option that accounts for the pressure remaining constant in the vessel as the volume decreases below 0.21L is the ideal gas law PV = nRT

According to the ideal gas law, the ratio of a gas's pressure (P) and volume (V) to its moles (n) multiplied by its gas constant (R) multiplied by its temperature (T) is known as the ideal gas equation. The pressure and volume are inversely related when the number of moles and the temperature are held constant, which means that as the volume falls, the pressure increases and vice versa.

However, in this case, as the volume falls below 0.21L, the pressure inside the vessel stays constant. This could be explained by the use of outside forces, such a membrane or a piston, which can keep the gas under pressure even as it decreases.

Learn more about Pressure here

https://brainly.com/question/12971272

#SPJ4

In this case, member be is in compression because force Fbe = -Fec - Fed is negative. Member ef is in tension because force Fef = -Fed - Fae is positive. Member cb is in compression because force Fcb = -Fae - Fec is negative.

Equilibrium is the condition of a system when neither its state of motion nor its internal energy state tends to change with the time.

For member be:

Fbe = Fce + Fde

Fbe = -Fec - Fed

And For member ef:

Fef = Fde + Fae

Fef = -Fed - Fae

For member cb:

Fcb = Fae + Fce

Fcb = -Fae - Fec

If the force is positive it is in tension, if it is negative it is in compression.

And, in this case, member be is in compression because force Fbe = -Fec - Fed is negative. Member ef is in tension because  force Fef = -Fed - Fae is positive. Member cb is in compression because force Fcb = -Fae - Fec is negative.

To know more about equilibrium, refer

https://brainly.com/question/517289

#SPJ4

It will take 207.9 sec for the pendulum's swing to be reduced to half its initial amplitude.

given:

T= time period initial  = 1 sec

time constant = 300 sec

The pendulum's  oscillation will eventually be stopped due to the air resistance offered by air .  Oscillations will die down in a manner such that it makes an exponential curve.

We want the time at which the pendulum will stop due to friction

We know the formula for damping

[tex]A = A[/tex]'  [tex]e^{-(\frac{t}{300} )}[/tex]

A= initial amplitude

A' = final amplitude = A/2

so 't'  at

[tex]A = \frac{A}{2} \ 300[/tex] ㏑ (2 )

t= 207.94 sec

To learn more about damping

brainly.com/question/13161950

#SPJ4

Heat emitted from a candle, Microwaves from a microwave oven, Radio waves transmitted between towers, Sound waves from a car radio.

To learn more about the examples of energy transfer by radiation refer to:

https://brainly.com/question/18378721

#SPJ1

Answer:

Yes, you are correct. In order to be in equilibrium, two charges must have equal but opposite charges. So, if the total charge is -6 x 10^-9 C, dividing it into equal and opposite charges would give each charge a value of 3 x 10^-9 C. This is because (-6 x 10^-9 C) / 2 = 3 x 10^-9 C.

When joists do not completely span the distance from one wall to the other, you must offset the markings on the second wall by 1 1/2 inches. This is known as a "joist hanger offset."

To learn more about joist hanger refer:

brainly.com/question/27995158

#SPJ4

When two long wires are separated by a distance x and oriented perpendicular to each other, a charge placed at certain points will remain stationary due to the balance of electric forces acting on it.

To learn more about charge refer:

brainly.com/question/18102056

#SPJ4

For best results, if not tested immediately, a semen sample should remain at a temperature 37 ºC. Thus, option C is correct.

Temperature is a physical property of matter that quantitatively expresses the common notions of hot and cold. Temperature is measured with a thermometer, which may be calibrated to a variety of temperature scales, including Celsius, Fahrenheit, Kelvin, and Rankine. The most commonly used scales are Celsius (formerly called centigrade) and Fahrenheit.

In scientific terms, temperature is the measure of the average kinetic energy of particles in a system. Temperature is an intensive property, meaning it is independent of the amount of matter in a system. For example, water at a given temperature is the same regardless of whether it is in a glass, a bucket, or an ocean.

This temperature range is the optimal temperature for preserving the viability of the sperm cells. If the sample is not tested immediately, it should be stored in a refrigerator or cooler with a temperature at or below this range to ensure the best possible results.

To know more about temperature click-

brainly.com/question/28590546

#SPJ4

Complete question:

For BEST results, if not tested immediately, a semen sample should remain at which of the following temperatures following collection?

a) 4 ºC

b) Room temperature

c) 37 ºC

d) -40 ºC

False. Removing fault current within seconds or minutes may not be enough to prevent damage to the conductor or equipment.

What is meant by a short circuit?

To learn more about short-circuit refer to:

https://brainly.com/question/28616542

#SPJ4

Scientists were surprised to discover that just like Saturn, all of the Jovian planets had rings.

Jovian planets include Jupiter, Saturn, Uranus, and Neptune and these planets have larger sizes and masses. Jovian planets do not have solid surfaces and they are sometimes called gas giants because they are large and made mostly of gases.

Jovian planets had rings but they were not as large or as well-known as Saturn's rings, but they were still present and visible under certain conditions. Unlike the terrestrial planets that make up our inner solar system,  Jovian planets do not have solid surfaces.

To know more about Jovian planets, refer

https://brainly.com/question/13105744

#SPJ4

1) The ratio of density of A to density of B is 3/2.
2) The ratio of volume of A to the volume of B is 1/3.

How closely a material is packed together is determined by its density. As the mass per unit volume, it is referred to. D or is the symbol for density. Formula for Density = m/V, where is the density, m is the object's mass, and V is its volume.

Given:

Weight of A block = 12 N

Apparent weight of A block = 8 N

Weight of B block = 20 N

Apparent weight of B block  = 12 N

Given is a relationship between apparent weight and original weight.

W' = W -B --- (1)

B = W dis liq - ρ liq V obj ---(2)

For block-A :

From equations (1) and (2),

W' = W  - ρt V

Substitute the given values,

8 = 12 - ρt V

ρt V = 4 ---(3)

For block-B :

From equations (1) and (2),

W' = W  - ρt V

12 = 24 - ρt V

ρt V = 12 ---(4)

From equations (3) and (4)

ρt VA/ρt VB = 4/12

ρt VA/ρt VB = 1/3

As a result, the ratio of volume of A to the volume of B is 1/3.

From given weights of A block  and B block,

[tex]W_A}[/tex]/[tex]W_{B}[/tex] = 12/24 ---(5)

weight of an object in terms of volume and density can be written as,

W = ρ Vg

So, equation (5) written as,

ρA [tex]V_{A}[/tex]g/ρB [tex]V_{B}[/tex]g = 12/24

ρA/ρB × [tex]V_{A}[/tex]/[tex]V_{B}[/tex] = 1/2

Substitute  [tex]V_{A}[/tex]/[tex]V_{B}[/tex] = 1/3

ρA/ρB ×1/3 = 1/2

ρA/ρB = 3/2

So, the ratio of density of A to density of B is 3/2.

To know more about density visit:

https://brainly.com/question/16037173

#SPJ4

Alpha Centauri (4.4 ly from the Solar system) in 70 years. The speed should be around 6.8×107 kph.

What is meant by speed ?

To learn more about speed refer to

https://brainly.com/question/27888149

#SPJ4

The right block must have a mass of 7.9 kg to balance the forces and remain stationary.

The two blocks remain stationary when the net force on the system is zero. In this case, the force of gravity on the two blocks is balanced by the tension in the rope connecting them. The tension in the rope can be determined using the sine of the angles and the masses of the blocks.

Tension = (mass1 × gravity) × sin(angle1) + (mass2 × gravity) × sin(angle2)

Substituting the known values:

Tension = (10 kg × 9.8 m/s²) × sin(23°) + (mass2 × 9.8 m/s²) × sin(40°)

Solving for mass2:

mass2 = (Tension - (10 kg × 9.8 m/s²) × sin(23°)) / (9.8 m/s² × sin(40°)).

The mass of the right block must be 7.9 kg for the two blocks to remain stationary.

To learn more about the force at

https://brainly.com/question/13191643?referrer=searchResults

#SPJ4

The question is -

Two blocks in the Figure below are at rest on frictionless surfaces What must be the mass of the right block so that the two blocks remain stationary? 4.9kg 6.1kg 7.9kg 9.8kg

The correct answer is b. They are required to establish the OCPD's typical ampere rating.

What are the benefits of performing short-circuit calculations in an electrical system?

Performing short circuit calculations in an electrical system can provide a number of benefits.

Short circuit calculations can help prevent potential safety hazards and maximize the efficiency of the electrical system.

By performing these calculations, the system can be designed to ensure that any overcurrent are limited to safe levels and that the equipment is not overloaded.

Additionally, the calculations can be used to determine the fault level of the system, allowing for the selection of components and the assignment of protective devices that can effectively manage any overcurrent that occur.

By having an understanding of the fault level, the system can be designed to prevent any outages that could occur due to overloading or short circuiting of the system.

Short circuit calculations also provide a way to verify the functionality and performance of the system, as well as identify any areas that require improvement.

Overall, short circuit calculations are an invaluable tool for designing and maintaining a safe and reliable electrical system.

To learn more about short-circuit refer to:

https://brainly.com/question/11754298

#SPJ4

(A) When an air particle bombards a smoke particles, the smoke particle moves to the same direction as the air particle that hit it. When another air particle hits the smoke particle, it changes its direction to that of the second air particle, and so on. This is called Brownian motion.

(B) If the temperature of the surroundings is increased the air particles would gain kinetic energy resulting in more frequent collisions with the smoke particles. Therefore, the smoke particles would be seen moving haphazardly.

(C) The microscope helps magnify the smoke particles for a much more better observation. The lens help in focusing. As the air particles are really small and cannot be observed; therefore, smoke particles are used as they are easy to see and observe; thus, ensuring a better experiment.

The relationship between speed, distance, and time is described using the formula speed distance time. An object traveling 10 miles in 5 minutes averages 120 miles per hour.

10 miles were covered in total.

It took five minutes in total.

The formula can be used to determine the speed.

s = d/t

s being the speed

D stands for distance.

The amount of time used

Let's change the known variables in the equation above to get

s = 10/5

= 2 miles/minute

However, we must convert the speed to miles per hour in order to use it.

s=2 x 60 miles per hour

120 miles per hour.

An object traveling 10 miles in 5 minutes averages 120 miles per hour.

Consequently, the typical speed is 120 miles per hour.

To learn more about distance refer

https://brainly.com/question/24741841

#SPJ4

The height of Cliff is 45 m

It is given that

Velocity with which rock dropped from cliff =

30 m/s

intial velocity = 0 m/s

acceleration due to gravity = 10 m/s^2

We have to find how high was the cliff

v^2 - u^2 = 2as

(30)^2 - 0 = 2 x (-10) x s

900 = -20s

s = 45 m

Hence, height of Cliff is 45 m

Learn more about Height here:

https://brainly.com/question/28122539

#SPJ4

Changes in the quantity and quality of light can have significant impacts on aquatic environments, both on the organisms that live there and on the physical characteristics of the water. Some key impacts include:

What are the changes in quantity and quality of light that can have significant impact?

Overall, changes in the quantity and quality of light can have significant and wide-ranging impacts on aquatic environments, affecting everything from the productivity and temperature of the water to the distribution and survival of different species.

To learn more about light refer:

https://brainly.com/question/30978

#SPJ4