The partial pressure of oxygen gas when this mixture is delivered at a total pressure of 8.4 bar is 0.0039 bar.
What is the partial pressure of oxygen gas in the mixture?The partial pressure of oxygen gas in the Heliox deep-sea diving mixture that contains 3.6g of oxygen to every 96.4g of helium is calculated as follows:
Moles of oxygen gas = mass/molar mass
mass of oxygen gas = 3.6 g
molar mass of oxygen gas = 32.0 g
moles of oxygen gas = 3.6/32
moles of oxygen gas = 0.1125 moles
Moles of helium gas = mass/molar mass
mass of helium gas = 96.4 g
molar mass of helium gas = 4.0 g
moles of helium gas = 96.4/4
moles of helium gas = 24.1 moles
Total moles of gases = 24.1 + 0.1125
Total moles of gases = 24.2125
Partial pressure of oxygen gas = mole fraction of oxygen gas * total pressurePartial pressure of oxygen gas = 0.1125/24.2125 * 8.4 bar
Partial pressure of oxygen gas = 0.0039 bar
Learn more about partial pressure at: https://brainly.com/question/14119417
#SPJ1
what is the role of quantum chemistry IRL
Answer:
Quantum chemistry strives to accurately predict chemical and physical properties of molecules and materials, which is useful to many fields of science and engineering. Predicting chemical properties using a first principles approach at the atomic scale is a theoretical and computational challenge.
Explanation:
Atomic mass of 7.0150 amu natural abundance of 92.58 Second has a atomic mass of 6.0150 amu a percent natural abundance of 7.42 What is the atomic weight of the element
The atomic weight of the element is 6.9408 amu.
The relative abundance of an isotope is defined as the percentage of atoms of a specific atomic mass that can be found in a naturally occurring sample of an element.
The atomic mass of the first isotope is 7.0150 amu.
The abundance of the first isotope is 92.58 %.
The atomic mass of the second isotope is 6.0150 amu.
The abundance of the second isotope is 7.42 %.
Now, abundance₁ = 92.58 % = = ( 92.58/ 100) = 0.9258
abundance₂ = 7.42 % = (7.42 / 100 ) = 0.0742
Therefore, the average atomic weight is:
Atomic mass = mass₁ × abundance₁ + mass₂ × abundance₂
Atomic mass = (7.0150) × (0.9258) + (6.0150) × (0.0742) amu
Atomic mass = 6.494487 + 0.446313 amu
Atomic mass = 6.9408 amu
The element's atomic weight is 6.9408 amu.
Learn more about atomic mass here:
https://brainly.com/question/1649349
#SPJ9
Pretest Unit 1
Question 11 of 30
What is the change in the freezing point of water when 35.0 g of sucrose is
dissolved in 300.0 g of water?
K, of water = -1.86°C/mol
molar mass sucrose = 342.30 g/mol
ivalue of sugar = 1
ΔTf=−0.634°C
Explanation:
We're asked to find the freezing point depression of a solution.
To do this, we use the equation
ΔTf= i⋅m⋅Kf
where,
ΔTf is the change in freezing point temperature that we're trying to find.
i is the Van't Hoff factor, which is given as 1 (and usually is 1 in the case of nonelectrolytes)
m is the molality of the solution, which is
molality = mol solute /kg solvent
Convert the given mass of sucrose to moles using its molar mass:
35.0g sucrose(1lmol sucrose342.30g sucrose)=0.102 mol sucrose
The molality is thus
molality=0.120lmol sucrose/0.3000lkg water=0.341m
K f is the molal freezing point constant for the solvent (water), which is given as −1.86°C/m
Plugging in known values, we have
ΔTf=(1)(0.341m)(−1.86l°C/m)
=−0.634l°C
This represents how much the freezing point decreases. The new freezing point of the solution is found by adding this value from the normal freezing point of the solvent ( 0.0°Cfor water):
new f.p. = 0.0°C −0.634°C
= −0.6341°C
Learn more about The freezing point here:-https://brainly.com/question/24314907
#SPJ9
Carrie measured mass and another property, X, of three pure samples of the same compound. She recorded her data in the table.
Which of the following best describes property X?
The property X is an extrinsic property.
What is an extensive property?The term extensive property refers to the type of property that depends on the amount of the substance present. We must recall that an intensive property does not in any way depend on the number or the amount of the substance present in the sample.
If we have a good look at the table that is being referred to here, we would see that the mass of the substance tends to increase as a certain un named property of the substance X is increasing. This implies that the property X is affected by the mass of the object which is the quantity of matter in the object. This gives us an idea that the property that we are referring to can not be an intrinsic property since it varies with the mass of the substance that is under study as shown.
We can then conclude that the property X is an extrinsic property.
Learn more about extrinsic property: https://brainly.com/question/28588297
#SPJ1
Missing parts;
Carrie measured mass and another property, X, of three pure samples of the same compound. She recorded her data in the table. Which of the following best describes property X?
A. X is an intensive property because it does not vary with the size of the sample.
B. X is an extensive property because it does not vary with the size of the sample.
C. X is an extensive property because it varies directly with the size of the sample.
D. X is an intensive property because it varies directly with the size of the sample.
An atom with six protons and five
electrons would have an electric charge
of
O-1
O
O-2
O +1
Answer:
A positive charge of +1
Explanation:
The charge carried by atom depends on the number of protons and electrons present. The neutrons are not charged hence they do not contribute to the net charge of the specie.
The specie mentioned in the question has six protons and five electrons. Hence it has an excess of one positive charge hence a net charge of +1.
ANSWER:
ABCDFGHIJKLMNOPQRSTXYZ
In the 1800s two scientists, Theodor Schwann and Matthias Schleidern, studied different types of organisms. After many years of studying a great variety of organismns, they drew similar but independent conclusions about their observations. F Schwann studied animal and concuded that all animals are made of cells. What statement was developed most directly from these conclusions and is part of the modern cell theory? Schleiden studied plants and concluded that all plants are made of cells. The functions of living things occur in cells. G Cells exist only in mnulticellular organisms. H Living things are composed of cells. J Cells contain hereditary information.whats the answer?
Complex cells exist only in multicellular organisms and all living things are composed of cells and DNA contain hereditary information
Multicellular organisms are made of more than one cell and are complex organisms and they possess distinct organs and organ systems and they are eukaryotes means they contain membrane-bound structures and modern cell theory that cells are the basic structural, functional, and organizational units of both single-celled and multicellular organisms and cells divide and pass on hereditary information and energy flows within cells here g is the complex cell only exist only in multicellular organisms and h is the all the living things are composed of cells and j means DNA cells contain hereditary information and DNA is responsible for genetic information
Know more about multicellular
https://brainly.com/question/17577269\
#SPJ1
Initially, 0.880 mol of A is present in a 3.00 L solution.
2A(aq)↽−−⇀2B(aq)+C(aq)
At equilibrium, 0.150 mol of C is present. Calculate K.
The value of the equilibrium constant, K of the reaction is 0.055 M
What is the value of the equilibrium constant, K of the reaction?The value of the equilibrium constant, K of the reaction is determined as follows:
Equation of reaction: 2 A (aq) ⇄ 2 B (aq) + C (aq)
Initial moles of A present = 0.88 mol
Volume of solution = 3.00 L
At equilibrium,
moles of C present = 0.150 moles
moles of B present = 2 * 0.150 moles
moles of B present = 0.300 moles
moles of A present = 0.880 - (0.300 + 0.150)
moles of A present = 0.430 moles
Concentration of C = 0.15/3 = 0.050 M
Concentration of B = 0.45/3 = 0.150 M
Concentration of A = 0.43/3 = 0.143 M
K = (0.050 * 0.150²)/0.143²
K = 0.055 M
Learn more about equilibrium constant, K at: https://brainly.com/question/19340344
#SPJ1
there are ____ atoms are in every living thing
Answer:
There are carbon atoms in every living thing
what is the difference between the number of electrons in an atom of calcium and the number of electrons in an atom of oxygen?
the word a'toms comes form a language what language is it from?
Answer:
A'toms comes from the Greek language.
Hope this helps :)
Luster Malleability
Luster and malleable are the properties of metals.
What is Luster and malleable?Luster is the property of metal which depicts that metals are lustrous in nature that is shiny in appearance.Malleability is the property of metal which means that metals can be hammered into thin sheets.There is a property of metal named ductile, as metals are ductile which means metals can be drawn into thin wires.Zinc is an exception for the malleable property of metals.And for ductility there are two exceptions namely zinc and mercury.Some non-metals like carbon in the form of diamond are also lustrous in nature.Though there are four types of luster also but that depth is absolutely not worth , but to mention that namely waxy, pearly, vitreous, silky .To know more about metals visit:
https://brainly.com/question/28650063?referrer=searchResults
#SPJ9
What is the solubility of k2so4 at 70oC
The solubility of k2so4 at 70oCis 100ml
From the curve, at 70°C temperature 50g of K2SO4 can be dissolved in 100 ml of H2O
K2SO4 produces 1 SO4(2-) ion and 2 K (+) ions. Therefore, the ratio of the number of ions generated following dissociation to the original number of molecules is known as the Van't Hoff Factor for K2SO4.KOH (potassium oxide) and H2SO4 are combined to create potassium sulphate (K2SO4) (Sulphuric Acid). K2SO4 is a neutral salt because KOH is a strong base and H2SO4 is a potent acid.The inorganic chemical with the formulaK2SO4 is a white, water-soluble solid that is also known as sulphate of potash (SOP), arcanite, or potash of sulfur in older terminology. It frequently provides both potassium and sulfur to fertilizers.To know more about K2SO4 visit:
https://brainly.com/question/14395186
#SPJ9
CH3(CH2)12COOH
Write the total number of atoms on of that element in the compound.
The number of atoms of each element in one mole of the given compound is:
Number of C atoms = 7.826 * 10²⁴ C atomsNumber of H atoms = 1.685 * 10²⁵ H atomsNumber of O atoms = 1.204 * 10²⁴ O atomsWhat is the total number of atoms of each element in one mole of the compound, CH₃(CH₂)₁₂COOH?The total number of atoms of each element in one mole of the compound, CH₃(CH₂)₁₂COOH is determined as follows:
Number of atoms in one mole of atoms of an element = 6.02 * 10²³ atoms.
The number of moles of atoms of each element in one mole of the given compound is;
Carbon, C = 1 + 12 + 1 = 13 moles of C atoms
Hydrogen, H = 3 + 2 * 12 + 1 = 28 moles of H atoms
Oxygen, O = 2 moles of atoms of O
Number of atoms in 13 moles of C atoms = 13 * 6.02 * 10²³ atoms.
Number of atoms in 13 moles of C atoms = 7.826 * 10²⁴ C atoms
Number of atoms in 28 moles of H atoms = 28 * 6.02 * 10²³ atoms.
Number of atoms in 28 moles of H atoms of an element = 1.685 * 10²⁵ H atoms
Number of atoms in 2 moles of O atoms = 2 * 6.02 * 10²³ atoms.
Number of atoms in 2 moles of O atoms = 1.204 * 10²⁴ O atoms
Learn more about number of atoms at: https://brainly.com/question/23854251
#SPJ1
A student is working on creating an experiment. Based on the chart they have started filling out, what section are they on? A. Hazard identification B. Risk Assessment C. Materials and Methods D. Procedure
In a case whereby a student is working on creating an experiment. Based on the chart they have started filling out, B. Risk Assessment .
What is Risk Assessment?Risk assessment can be describe as the overall process or method where the risk is been identified.
It should be noted that this does not only Identify hazards but also look into the risk factors which could bring about potential to cause harm in the process known as the hazard identification.
Therefore, from the case above we can see that there is Analyses and evaluation of the risk associated .
Learn more about Risk Assessment at:
https://brainly.com/question/1224221
#SPJ1
How can you separate sand pours salt and styrofoam beads
Physical separation (picking out pieces or employing density to shake sand to the top), salt dissolution in water, and salt melting are the three techniques used to separate salt and sand.
What is physical separation?
The differing densities of salt and sand are the basis for another physical separation technique. Sand has a density of 2.65 g/cm3, but salt has a density of 2.16 g/cm3.
Based on solubility, one technique for distinguishing salt and sand exists. When a substance dissolves in a solvent, it is said to be soluble. An ionic chemical that is soluble in water is salt, often known as sodium chloride or NaCl.
Based on melting point, there is yet another technique to separate combination components. Sand has a melting point of 3110°F (1710°C), while salt has a melting point of 1474°F (801°C).
Therefore, Physical separation (picking out pieces or employing density to shake sand to the top), salt dissolution in water, and salt melting are the three techniques used to separate salt and sand.
To learn more about separation, refer to the link:
https://brainly.com/question/4248607
#SPJ1
Mr. Perez was assigned to determine the density of a sample of nickel metal.
When he finished, he reported the density of nickel as 5.59 g/mL. After looking it
up, he found the true value of nickel is 6.44 g/mL.
The error in the given measurement is determined as 0.85 g/ml.
What is error in measurement?The error in measurement is a mathematical way to show the uncertainty in the measurement.
Error in measurement is difference between the true measurement and the observed measurement.
The error in the given measurement is calculated as follows;
error = true measurement - observed measurement
error = 6.44 g/ml - 5.59 g/ml
error = 0.85 g/ml
Thus, the error in the given measurement is determined as 0.85 g/ml.
Learn more about error in measurement here: https://brainly.com/question/13370015
#SPJ1
The complete question is below:
Find the error in the measurement
Convert 7.6 cm3 to m3
Conversion of 7.6cm^3 to m^3 is 0.0000076m^3
Divide the volume by the conversion ratio to convert a cubic centimeter measurement to a cubic meter measurement. The cubic centimeters divided by 1,000,000 gives the volume in cubic meters.
The same attribute is expressed using a unit conversion, but in a different unit of measurement. For instance, time can be stated in minutes rather than hours, and distance can be expressed in kilometres, feet, or any other measurement unit instead of miles.
We need to convert between units in order to ensure accuracy and prevent measurement misinterpretation. For example, we do not measure a pencil's length in kilometers. In this situation, one must convert from kilometers (km) to centimeters (cm).
Conversion:
1m = 100cm
1m = 10^2cm
1cm = 10^-2m
1cm^3 = (10^-2)^3m^3
1cm^3 = 10^-6m^3
7.6cm^3 = 7.6 x 10^-6m^3
7.6cm^3 = 0.0000076m^3
Learn more about Conversion here:
https://brainly.com/question/1531939
#SPJ9
What determines the trend in ionization energy as you move DOWN a column on the periodic table.
Elements have a larger radius, electrons are pulled tightly, and have a higher ionization energy.
Elements have a smaller radius, electrons are pulled tightly, and have a higher ionization energy.
Elements have more energy levels, cannot pull in the electrons tightly, and have a lower ionization energy.
Elements have fewer energy levels, pull in the electrons weakly, and have lower ionization energy.
Elements have more energy levels, pull in the electrons tightly, and have a lower ionization energy.
Elements have fewer energy levels, pull the electrons tightly, and have a higher ionization energy.
Answer:
Elements have more energy levels, cannot pull in the electrons tightly, and have a lower ionization energy.
Explanation:
If 6.000 g of sugar is mixed with 9.000 g of water, what is the
concentration in weight percent?
The percent weight of the solution is 20% sugar solution.
What is the weight percent concentration of the solution?The concentration of a solution is the amount of solute that is present in a given volume or mass of a solution
The concentration of a solution can be expressed as:
molar concentrationmass concentrationpercentage concentrationThe percent weight of the solution is determined as follows:
Mass of sugar = 6.00 g
Mass of water = 9.00 g
Mass of solution = 9.00 + 6.00
Mass of solution = 15.00 g
Weight percent of solution = 6/15 * 100
Weight percent of solution = 20% sugar solution
Learn more about weight percent at: https://brainly.com/question/25320197
#SPJ1
Write an equation for the reaction of ammoniacal silver nitrate with phenylethyne. What is the role of ammonia in the reaction?
Equation for the Reaction is C2H2+2AgNO3+2NH4OH→C2Ag2+2NH4NO2+2H2O
Phenylethyne is a type of acetylene. Phenylethyne reacts with ammoniacal AgNO3 and the reaction is known as Tollens’s Test. In the following Tollens test, we get a white precipitate. A white precipitate known as silver acetylene (C2Ag2) is produced.We know that the Tollens reagent can be used to determine whether an aldehyde or ketone functional group is present. We are aware that the Tollens reagent is made up of a silver nitrate, ammonia, and sodium hydroxide solution.A triple bond makes up acetylene, and as silver acetylide also has a triple bond in its structure, the reaction with ammoniacal AgNO3 will result in silver acetylide. Role of ammonia is that it forms silver oxide, but with the addition of more ammonia, this solid precipitate will dissolve and yield a transparent solution of the diamminesilver(I) complex ([Ag(NH3)2]+).Learn more about tollen's test here:
https://brainly.in/question/6677945
#SPJ9
wood needs to be given heat energy to reach the temperatures required for combustion to begin. what property of the wood would you need to know to predict how fast the wood would start to burn? explain
The property of the wood that is to be needed to know to predict how fast the wood would start to burn is combustion.
Combustion is a chemical reaction that occurs between a combustible material, a substance that causes or favors the combustion of other substances that is oxidizer and oxygen, all this accompanied by outgoing energy in the form of heat (exothermic energy) and incandescent energy.In this case, wood is the combustible material, and combustion is generated by separate energy, fire, phosphors, and sparks.Wood combustion is dependent on so many variables e,g. weather, temperature, humidityBut the wood of small size tends to ignite faster than those with larger density.To learn more about combustion visit:
https://brainly.com/question/15117038
#SPJ1
A sample of 0.215 M Co(NO3)2 contains 2.53 x 10^22 nitrate ions. The volume of the sample is____mL
Report your answer to three significant digits and do not use scientific notation.
The volume of the sample, given the data from the question is 97.7 mL
How to determine the mole of nitrate ion, NO₃⁻We'll begin by obtaining the mole of the nitrate ion, NO₃⁻ that contains 2.53×10²² ions. This can be obtained as follow:
From Avogadro's hypothesis,
6.02×10²³ ions = 1 mole of NO₃⁻
Therefore,
2.53×10²² ions = (2.53×10²² ions × 1 mole) / 6.02×10²³ ions
2.53×10²² ions = 0.042 mole of NO₃⁻
How to determin the mole of Co(NO₃)₂Co(NO₃)₂(aq) --> Co²⁺(aq) + 2NO₃⁻(aq)
From the equation above,
2 moles of NO₃⁻ is present in 1 mole of Co(NO₃)₂
Therefore,
0.042 mole of NO₃⁻ will be present in = 0.042 / 2 = 0.021 mole of Co(NO₃)₂
How to determine the volume of the sampleMole of Co(NO₃)₂ = 0.021 moleMolarity of Co(NO₃)₂ = 0.215 MVolume = ?Molarity = mole / volume
Thus,
Volume = mole / molarity
Volume = 0.021 / 0.215
Volume = 0.0977 L
Multiply by 1000 to express in mL
Volume = 0.0977 × 1000
Volume = 97.7 mL
Thus, the volume of the sample is 97.7 mL
Learn more about number of ion and molarity:
https://brainly.com/question/15370276
https://brainly.com/question/14295820
#SPJ1
Question
Which statement is correct?
The invention of the hand lens helped scientists discover cells
The invention of the hand lens helped scientists discover cells,
The invention of the the microscope helped scientists discover cells
The invention of the the microscope helped scientists discover cells.
What are cells?Cells are the basic unit of life from which all living organisms are built up from.
Prior to the discovery of cells, scientists did not have any instrument to properly view cells.
However, with the invention of the microscope, the English scientist Robert Hooke was able to discover cells when he viewed plant cells through a microscope.
Today, with the help of more powerful microscopes such as the electron microscope, other structures that are found within the cell have been discovered.
In conclusion, the discovery of cells was aided by the invention of microscope.
Learn more about discovery of cells at: https://brainly.com/question/3717876
#SPJ1
the number of electrons in atoms determine an element's __ properties
Answer:
The number of electrons in atoms determine an element's chemical properties.
Hope this helps in any way :)
Use this information to calculate AGxn-
2C₂H₂(g) +50₂(g) →4CO₂(g) + 2H₂O(g)
AGCH₂=209.2 kJ/mol
AGE.co=-394.4 kJ/mol
AGHO-228.57 kJ/mol
AG
=
DONE
2,453.1
-1,616.7
-2,453.1
kJ
-1,616.7 kJ/mol
2C₂H₂(g) +50₂(g) →4CO₂(g) + 2H₂O(g)
AGC₂H₂=209.2 kJ/mol
AGE.co2=-394.4 kJ/mol
AG H2O-228.57 kJ/mol
AG 5O2 = ?
Now From the above given equation , we have got the enthalpy of no. of moles in reaction
4 moles of CO₂ contains = 4 -394.4 kJ/mol = -1577.6
2 moles of H₂O contains = 2 -228.57 kJ/mol = - 457
2 moles of C₂H₂ contains = 2 209.2 kJ/mol = +418.4
now putting all the values in equation
50₂(g) = 4CO₂(g) + 2H₂O(g) - 2C₂H₂(g)
50₂(g) = -1577.6-457-418
50₂(g) = -1,616.7 kJ/mol
The amount of heat that a system releases or absorbs during a chemical reaction is known as the enthalpy change. The symbol for it is HEnthalpy is measured in the same SI unit as energy, the joule. At constant pressure, the expression known as "enthalpy change" is computed or determined. It is impossible to measure a system's absolute enthalpy. As a result, the enthalpy change is measured. In endothermic processes, the change in enthalpy is positive, while in exothermic reactions, it is negative.To know more about Enthalpy visit : https://brainly.com/question/13775366
#SPJ9
An atom of strontium has at least four different isotopes. What is different between
an isotope of Sr and an isotope of
86
87
Sr?
the number of protons in the nucleus
the number of neutrons in the nucleus
the size of the nucleus
the number of electrons in the atom
Answer:
B. the number of neutrons in the nucleus
Explanation:
Isotopes are atoms of the same element that have different numbers of neutrons but the same number of protons and electrons
Answer:
the number of neutrons in the nucleus
Explanation:
A gas leak was detected in an apartment building and the resulting gas was analyzed. A sample was found to contain 1.54 grams of sulfur and 0.0968 grams of hydrogen. Determine the empirical formula for the leaked gas.
Why are some amino acids described as essential amino acids? They are the ones most used in the body. They can be stored in the body. They are the only ones needed by the body. They cannot be made by the body.
Essential amino acids are the amino acids which cannot be made by the body. Therefore, (d) is the correct answer.
Out of the 20 amino acids, 9 amino acids are essential amino acids - histidine, lysine, isoleucine, methionine, leucine, phenylalanine, valine, threonine, and tryptophan.
While your body may produce non-essential amino acids, it is unable to produce essential amino acids; therefore, you must obtain them from diet.
Animal proteins including meat, dairy, and poultry are the richest providers of essential amino acids. But certain plant meals, such edamame and tofu made from soy, do contain all nine essential amino acids. In other words, they are "complete" suppliers of protein.
Your body converts protein you consume into amino acids, which it then uses for a variety of functions including controlling immune response and constructing muscle.
Learn more about Essential amino acids here:
https://brainly.com/question/14445691
#SPJ9
A compound is found to contain 10.85 % silicon, 27.40 % chlorine, and 61.75 % bromine by mass. The empirical formula for this compound is?
help asap!!!!!!!!!!!!!!
Answer:
D
Explanation:
the particles stick together, it can be covalent compound or ionic compound
