(a) How many grams of sodium are produced? \( g \) (b) How many liters of chlorine are collected, if the gas is at a temperature of \( \mathbf{2 7 3} \mathrm{K} \) and a pressure of \( \mathbf{1 . 0 0

Answers

Answer 1

your question seems to be incomplete. The units for temperature and pressure are cut off. Could you please provide the complete values for temperature and pressure.


Related Questions

what is the frequency of a wave that has a wavelength of 0.78 m and a speed of 343 m/s?

Answers

Answer:

439.76 Hertz

Explanation:

The equation for frequency is:

[tex] \sf f = \dfrac{ \nu}{ \lambda} [/tex]

Where:

f = frequency (Hertz), [tex] \nu[/tex] = speed (343 m/s) and [tex] \lambda[/tex] = wavelength (m)

Plugging the values,

[tex] \sf f = \dfrac{343}{0.78}[/tex]

[tex] \sf f \approx 439.75 \: Hz[/tex]

So The frequency of the given wave is 439.76 Hertz (approximately)

At a certain temperature, the K for the decompositon of H2S is 0.776 . H2S(g)↽−−⇀H2(g)+S(g) Initally, only H2S is present at a pressure of 0.128 bar in a closed container. What is the total pressure in the container at equilibrium?
total = ___ bar

Answers

The total pressure in the container at equilibrium is 0.128 bar.

To determine the total pressure in the container at equilibrium, we need to consider the equilibrium constant (K) for the given reaction and the initial pressure of H₂S.

The balanced equation for the decomposition of H₂S is:

H₂S(g) ⇌ H₂(g) + S(g)

The equilibrium constant expression for this reaction is:

K = [H₂][S] / [H₂S]

Given that K = 0.776, we can set up the equation as:

0.776 = [H₂][S] / [H₂S]

Since initially only H₂S is present, we can assume the concentrations of H₂ and S to be zero. Therefore, the equation becomes:

0.776 = (0)(0) / [H₂S]

Simplifying further, we get:

0.776 = 0 / [H₂S]

Since anything divided by zero is undefined, we can conclude that the equilibrium concentration of H₂S will also be zero. Therefore, at equilibrium, only the reactant H₂S has decomposed, and no products (H₂ and S) are formed.

As a result, the total pressure in the container at equilibrium will be equal to the partial pressure of H₂S at the start, which is 0.128 bar.

To know more about "Pressure" refer here:

https://brainly.com/question/30638771#

#SPJ11

Ethanol has a normal boiling point of 78.4 o C, a boiling-point constant of Kb = n1.07 K kg/mol and its vapour pressure at 292 K is 5332 Pa. A laboratory assistant adds sucrose (C12H22O11), a non-volatile sugar, to 400 g of ethanol at the given temperature. The vapour pressure of the solution is measured to be 5252 Pa. Determine the boiling point of the solution.

Answers

Ethanol has a normal boiling point of 78.4 o C, a boiling-point constant of K[tex]b[/tex]= n1.07 K kg/mol and its vapour pressure at 292 K is 5332 Pa, the boiling point of the solution is 81.55 o C.

The boiling point elevation of the solution can be calculated using the following equation:

ΔTb = K[tex]b[/tex] * m

where:

ΔTb is the boiling point elevation

Kb is the boiling-point constant of ethanol

m is the molality of the solution

The molality of the solution can be calculated as follows:

m = moles of solute / mass of solvent (kg)

The moles of sucrose in the solution can be calculated as follows:

moles of sucrose = mass of sucrose / molar mass of sucrose

The mass of sucrose is given as 400 g, and the molar mass of sucrose is 342.3 g/mol. This gives us:

moles of sucrose = 400 g / 342.3 g/mol = 1.17 mol

The mass of the solvent (ethanol) is 400 g, so the molality of the solution is:

m = 1.17 mol / 0.4 kg = 2.925 mol/kg

The boiling point elevation is then:

ΔTb = 1.07 K kg/mol * 2.925 mol/kg = 3.15 K

The normal boiling point of ethanol is 78.4 o C, so the boiling point of the solution is:

Tb = 78.4 o C + 3.15 K = 81.55 o C

Therefore, the boiling point of the solution is 81.55 o C.

To learn more about boiling point click here; brainly.com/question/30722172

#SPJ11

Compare the de Broglie wavelength of a proton moving at 1.30x107 miles per hour (5.81x106 m/s) to that of a bullet moving at 700 miles per hour (313 m/s) and an electron with a speed of 1.30x107 miles per hour (5.81x106 m/s).

Answers

The de Broglie wavelength of the proton is 6.82×10-14m, that of the bullet is 2.11×10-34m, and that of the electron is 1.25×10-9m.

De Broglie Wavelength De Broglie wavelength is the distance between the adjacent peaks in a wave and is denoted by λ (lambda). The wave property of matter is explained by the de Broglie wavelength. For all moving objects, de Broglie wavelength is given by λ = h/p, where λ is the wavelength of the object in metres, h is Planck’s constant with a value of 6.626×10-34 joules-second, and p is the momentum of the object in kg m/s.

Since h is a constant, the wavelength is inversely proportional to the momentum of the object. We can compare the de Broglie wavelength of the proton and bullet moving with a speed of 1.30×107 miles per hour (5.81×106 m/s) and 700 miles per hour (313 m/s), respectively, and an electron with a speed of 1.30×107 miles per hour (5.81×106 m/s).

Solution The momentum of the proton is given by

p = mv

where m is the mass of the proton and v is its velocity.

The mass of the proton is 1.67×10-27 kg and its velocity is 5.81×106 m/s.

Then, the momentum of the proton is

p = mv

= 1.67 ×10^-27 kg × 5.81 ×10^6 m/s

= 9.72 × 10^-21 kg.m/s

The de Broglie wavelength of the proton is given by

λ = h/p

where h is Planck’s constant with a value of 6.626×10-34 joules-second.

Substituting the values,

λ = h/p = 6.626 × 10^-34 J.s / 9.72 × 10^-21 kg.m/s

= 6.82 × 10^-14 m

Similarly, the momentum of the bullet is given by

p = mv

where m is the mass of the bullet and v is its velocity.The mass of the bullet is 0.010 kg and its velocity is 313 m/s.

Then, the momentum of the bullet is

p = mv

= 0.010 kg × 313 m/s

= 3.13 kg.m/s

The de Broglie wavelength of the bullet is given by

λ = h/p where h is Planck’s constant with a value of 6.626×10-34 joules-second.

Substituting the values,

λ = h/p

= 6.626 × 10^-34 J.s / 3.13 kg.m/s

= 2.11 × 10^-34 m

Finally, the momentum of the electron is given by p = mv where m is the mass of the electron and v is its velocity.

The mass of the electron is 9.11×10^-31 kg and its velocity is 5.81×106 m/s.

Then, the momentum of the electron is

p = mv = 9.11 × 10^-31 kg × 5.81 × 10^6 m/s

= 5.29 × 10^-24 kg.m/s.

The de Broglie wavelength of the electron is given by

λ = h/p

where h is Planck’s constant with a value of 6.626×10-34 joules-second.

Substituting the values,

λ = h/p

= 6.626 × 10^-34 J.s / 5.29 × 10^-24 kg.m/s

= 1.25 × 10^-9 m

To know more about wavelength   visit:-

https://brainly.com/question/31143857

#SPJ11

PLEASE HELP ME QUICK RIGHT ANSWERS ONLY WILL MARK BRAINLIEST 30 POINTS
There are 3.0 * 1023 formula units KI in a sample. How many grams of KI is this? The molar mass of KI is about 166 g/mol. ? g Kl Note : Avogadro's number is ..

Answers

**MARK BRAINLIEST**

Avogadro's number is approximately 6.022 × 10^23 formula units per mole.

Given that there are 3.0 × 10^23 formula units of KI, we can calculate the number of moles of KI by dividing the number of formula units by Avogadro's number:

Number of moles = (3.0 × 10^23 formula units) / (6.022 × 10^23 formula units/mol)

Number of moles ≈ 0.498 mol

To find the mass of KI, we can use the molar mass of KI:

Mass of KI = Number of moles × Molar mass

Mass of KI = 0.498 mol × 166 g/mol

Mass of KI ≈ 82.668 g

Therefore, there are approximately 82.668 grams of KI in the sample.

1. Write a complete ground-state electron configuration for each of the following atoms/ions: (4 x 1 = 4 marks) a. \( \mathrm{Ar} \) b. \( \mathrm{Rb} \) C. \( \mathrm{S}^{2-} \) d. \( \mathrm{K}^{+}

Answers

a. The electron configuration of argon (Ar) is 1s² 2s² 2p⁶ 3s² 3p⁶.

b. The electron configuration of rubidium (Rb) is 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s¹.

c. The electron configuration of sulfide ion (S²⁻) is 1s² 2s² 2p⁶ 3s² 3p⁶.

d. The electron configuration of potassium ion (K⁺) is 1s² 2s² 2p⁶ 3s² 3p⁶.

a. The electron configuration of argon (Ar) is obtained by filling up the electron orbitals in increasing order of energy. It has a total of 18 electrons, occupying the 1s, 2s, 2p, 3s, and 3p orbitals.

b. The electron configuration of rubidium (Rb) follows the same principle. It has 37 electrons, filling up the 1s, 2s, 2p, 3s, 3p, 4s, 3d, and 4p orbitals.

c. The sulfide ion (S²⁻) has gained two electrons compared to a neutral sulfur atom. Therefore, it has the same electron configuration as sulfur but with two additional electrons in the 2p orbital.

d. The potassium ion (K⁺) has lost one electron compared to a neutral potassium atom. Hence, it has the same electron configuration as potassium but without the last electron in the 4s orbital.

To know more about electron configuration refer here

https://brainly.com/question/29157546#

#SPJ11

The standard addition method is preferred when: Select one: a. the analyte concentration is too low. b. the sample matrix is complete and difficult to replicate. c. the instrument response can change during the experiment. d. a standard reference material is not available.

Answers

The standard addition method is preferred when the instrument response can change during the experiment. The correct option is (c).

The standard addition method is a technique used in analytical chemistry to determine the concentration of an analyte in a sample when there are interferences or variations in the instrument response.

This method is particularly useful when the instrument response, such as the detector signal, is not linear or when there are matrix effects that can affect the accuracy of the analysis.

By employing the standard addition method, known amounts of the analyte are added incrementally to the sample, and the instrument response is measured after each addition.

The difference in the instrument response before and after each addition allows for the determination of the analyte concentration in the sample.

This method is preferred when the instrument response can change during the experiment because it helps to compensate for any nonlinearities or variations in the instrument's response.

It enables the determination of the analyte concentration accurately, even in the presence of instrumental or matrix effects that may interfere with traditional calibration methods.

In summary, the standard addition method is chosen when the instrument response can vary or when there are matrix effects, ensuring more reliable and accurate measurement of the analyte concentration in the sample.

To know more about "Analyte concentration" refer here:

https://brainly.com/question/31028631#

#SPJ11

Write down the balanced equation for the complete combustion of 1 mole of your fuel, assume RT (room temperature) to determine the states of the substances in the equation. Fractions for stoichiometric coefficients are acceptable and necessary. C16​H34​+249​O2​→16CO2​+17H2​O

Answers

The balanced equation for the complete combustion of one mole of the fuel where RT  is assumed to determine the states of the substances in the equation is given by: C₁₆H₃₄ + 25O₂ → 16CO₂ + 17H₂O

The balanced chemical equation will have stoichiometric coefficients such that the number of atoms of each element will be equal on both sides of the chemical equation.

Therefore, to balance the equation, we need to determine the stoichiometric coefficients of the substances in the chemical equation. Here is the balanced chemical equation:

2C₁₆H₃₄ + 49O₂ → 32CO₂ + 34H₂O

The coefficients are written in the lowest whole numbers possible, while still maintaining the proper stoichiometry of the reaction.

To know more about balanced equation  click on below link :

https://brainly.com/question/31242898#

#SPJ11

Explain why 20.00 mL of 0.025 M Na2S2O3 solution is equivalent to 20.00 mL of a 4.167 mM KIO3 solution.

Answers

In this case, 20.00 mL of 0.025 M Na2S2O3 solution is equivalent to 20.00 mL of a 4.167 mM KIO3 solution because they contain the same number of moles. The equivalence between the 20.00 mL of 0.025 M Na2S2O3 solution and 20.00 mL of a 4.167 mM KIO3 solution can be explained by understanding the concept of molarity and stoichiometry.

Molarity (M) represents the number of moles of a solute dissolved in one liter of solution. In the given problem, the molarity of the Na2S2O3 solution is 0.025 M, which means that there are 0.025 moles of Na2S2O3 in every liter of solution.
To determine the equivalence between the two solutions, we need to compare the number of moles of Na2S2O3 and KIO3 in their respective volumes. Since the volumes are the same (20.00 mL), we can use the molarity to calculate the moles of each substance.
For the Na2S2O3 solution:
Moles of Na2S2O3 = Molarity × Volume = 0.025 M × 20.00 mL = 0.5 millimoles (mmol)
For the KIO3 solution:
Molarity = 4.167 mM, which means there are 4.167 millimoles of KIO3 in every liter of solution.
Moles of KIO3 = Molarity × Volume = 4.167 mM × 20.00 mL = 0.08334 millimoles (mmol)
Comparing the moles, we can see that 0.5 mmol of Na2S2O3 is equal to 0.08334 mmol of KIO3. Therefore, the two solutions are equivalent.
In summary, the equivalence is determined by comparing the moles of the solutes present in the same volume of the two solutions. In this case, 20.00 mL of 0.025 M Na2S2O3 solution is equivalent to 20.00 mL of a 4.167 mM KIO3 solution because they contain the same number of moles.

To know more about moles visit :

https://brainly.com/question/15209553

#SPJ11

In
functional group identification we can meet challenges? talk about
one test in particular with a limitation of it.

Answers

In functional group identification, there are numerous challenges that one can face while identifying the functional groups. One of the limitations of the tests is that they may not be conclusive or definitive.

Various tests have been developed for the identification of different functional groups in organic chemistry. However, one of the most commonly used tests is the Lucas Test. The test is used to identify the presence of alcohol functional groups in a given organic compound.

Limitation of the Lucas test:

One of the limitations of the Lucas test is that it can only be used to distinguish primary, secondary, and tertiary alcohols with high boiling points.

The test may not work for alcohols with low boiling points or those that are less soluble in water. Additionally, the test may produce inaccurate results if the reaction mixture is not well shaken or if the test tube is not kept in a hot water bath for the right duration.

Therefore, the Lucas test can produce inconclusive results if not performed under appropriate conditions.

To learn more about limitations, refer below:

https://brainly.com/question/33036812

#SPJ11

Choose the best indicator to approximate the pH of the following buffer solutions. Explain your choice with pH/pK/color information: a. 0.10 M NH,/0.10 M NH4Cl (assume equal volumes of each) b. 0.25 M Na₂CO3/0.05 HCl (assume equal volumes of each) c. Choose the best indicator to approximate the pH of the following buffer solutions. Explain your choice with pH/pK/color information: a. 0.10 M acetic acid/0.10 M sodium acetate (assume equal volumes of each) b. 0.10 M HF/0.10 NaF (assume equal volumes of each) mmer 2022 CHE 185 01ZL b Report #8: pH Indicators c. 0.10 NaH₂PO4/0.10 M Na₂HPO4 (assume equal volumes of each)

Answers

0.10 M NH3/0.10 M NH4Cl: Bromothymol blue (pKa ≈ 6.0) is the best indicator with a transition range of pH 6.0 to 7.6, matching the expected pH range. 0.25 M Na2CO3/0.05 M HCl: Phenolphthalein (pKa ≈ 9.3) is the suitable indicator with a transition range of pH 8.2 to 10.0, encompassing the expected pH range.

a. The best indicator to approximate the pH of a buffer solution consisting of 0.10 M NH3/0.10 M NH4Cl would be bromothymol blue (pKa ≈ 6.0).

The pH of this buffer solution will be slightly basic due to the presence of NH3. Bromothymol blue has a color transition range between pH 6.0 (yellow) and pH 7.6 (blue).

Since the expected pH of the buffer solution falls within this range, bromothymol blue can be used as an indicator to monitor the pH changes.

b. The best indicator to approximate the pH of a buffer solution consisting of 0.25 M Na2CO3/0.05 M HCl would be phenolphthalein (pKa ≈ 9.3).

The pH of this buffer solution will be slightly basic due to the presence of Na2CO3. Phenolphthalein has a color transition range between pH 8.2 (colorless) and pH 10.0 (pink).

Since the expected pH of the buffer solution falls within this range, phenolphthalein can be used as an indicator to monitor the pH changes.

c. The best indicator to approximate the pH of a buffer solution consisting of 0.10 M acetic acid/0.10 M sodium acetate would be phenolphthalein (pKa ≈ 9.3).

The pH of this buffer solution will be slightly acidic due to the presence of acetic acid. Phenolphthalein has a color transition range between pH 8.2 (colorless) and pH 10.0 (pink).

Although the expected pH of the buffer solution is slightly lower than the pKa of phenolphthalein, it is still within the transition range, and phenolphthalein can be used as an indicator to monitor the pH changes.

Other indicators with suitable transition ranges for this buffer include bromothymol blue and bromocresol green.

To know more about transition refer here:

https://brainly.com/question/30069775#

#SPJ11

another one please
A set of serial dilutions is performed. The original stock solution has a concentration \( 1.00 \mathrm{M} \). Each step in the series dilutes the solution by a factor of 10 . If the stock solution is

Answers

The concentration of solution #4 is 0.0000100 M. The correct option is C.

In serial dilutions, each step dilutes the solution by a fixed factor. In this case, the dilution factor is 10 for each step. Starting with the stock solution (#1) with a concentration of 1.00 M, each subsequent solution is diluted by a factor of 10.

To determine the concentration of solution #4, we need to calculate the cumulative dilution factor. Since each step dilutes the solution by a factor of 10, solution #4 undergoes three dilution steps from the stock solution (#1).

To find the concentration of solution #4, we can use the formula:

Concentration of solution #4 = Concentration of stock solution / (Dilution factor)³

Given:

Concentration of stock solution = 1.00 M

Dilution factor = 10 (since each step dilutes the solution by a factor of 10)

Using the formula, we can calculate the concentration of solution #4:

Concentration of solution #4 = 1.00 M / (10)³

Concentration of solution #4 = 1.00 M / 1000

Concentration of solution #4 = 0.001 M

However, the question asks for the concentration in scientific notation. Therefore, the concentration of solution #4 is 0.0000100 M. Option C is the correct one.

To know more about dilutions refer here:

https://brainly.com/question/28548168#

#SPJ11

Complete Question:

A set of serial dilutions is performed. The original stock solution has a concentration of 1.00 M. Each step in the series dilutes the solution by a factor of 10. If the stock solution is solution #1, what is the concentration of solution #4? A. 0.000100 M B.0.00100 M C. 0.0000100 M D. 0.0100 M

An aqueous solution of an ionic compound (has one cation for every two anions) that has a molar mass of 75.228 g/mol has a density of 1.33 g/mL when at 5.00% mass. What is its molarity? Just enter the number, not the units. Make sure that your number is in molarity. Question 2 0.5 pts An aqueous solution of an ionic compound (has one cation for every two anions) that has a molar mass of 75.228 g/mol has a density of 1.33 g/mL when at 5.00% mass. What is its molarity? Just enter the number, not the units. What is its molality? Just enter the number, not the units. Make sure that your numbjer is in molality. An aqueous solution of an ionic compound (has one cation for every two anions) that has a molar mass of 75.228 g/mol has a density of 1.33 g/mL when at 5.00% mass. What is its boiling point? Just enter the number, not the units. Make sure that your number is in ∘
C. k b

for water is 0.520 ∘
C/m and the boiling point of water is 100.0 ∘
C. I will grade this based on the answer you got for the molality in question 2. Question 4 0.5 pts An aqueous solution of an ionic compound (has one cation for every two anions) that has a molar mass of 75.228 g/mol has a density of 1.33 g/mL when at 5.00% mass. What is its osmotic pressure at 37.00 oC? Report your pressure in atm, but only include the number in the blank. I will grade this based on the answer you got for the molarity in question 1. Even if your molarity was incorrect, you still could get this problem 100% correct if you used the molarity correctly.

Answers

1. The molarity of the aqueous solution is 17.697 M.

2. The molality of the aqueous solution is 0.698 m.

3. The boiling point of the solution is 100.3616 °C.

4. The osmotic pressure of the solution at 37.00 °C is 452.28 atm.

1. Calculation of Molarity:

Given molar mass (M) = 75.228 g/mol, density (D) = 1.33 g/mL, and mass percentage (MP) = 5.00%.

First, find the mass of the solution using MP: Mass_solution = MP * 100g = 5g.

Then, determine the moles of solute using M: Moles_solute = Mass_solution / M = 5g / 75.228 g/mol = 0.0665 mol.

Calculate the volume of the solution: Volume_solution = Mass_solution / D = 5g / 1.33 g/mL = 3.7594 mL = 0.0037594 L.

Finally, calculate molarity: Molarity = Moles_solute / Volume_solution = 0.0665 mol / 0.0037594 L = 17.697 M.

2. Calculation of Molality:

Using the same values as before, find the mass of the solvent: Mass_solvent = Mass_solution - Mass_solute = 100g - 5g = 95g.

Convert the mass of the solvent to kilograms: Mass_solvent = 95g * (1 kg / 1000g) = 0.095 kg.

Calculate the molality: Molality = Moles_solute / Mass_solvent = 0.0665 mol / 0.095 kg = 0.698 m.

3. Calculation of Boiling Point:

Given kb = 0.520 °C/m, use the previously calculated molality: ΔTb = kb * Molality = 0.520 °C/m * 0.698 m = 0.3616 °C.

Boiling point of the solution = Boiling point of water + ΔTb = 100.0 °C + 0.3616 °C = 100.3616 °C.

4. Calculation of Osmotic Pressure:

Osmotic pressure (π) can be calculated using the formula π = MRT, where M is molarity, R is the ideal gas constant, and T is temperature in Kelvin.

Convert the given temperature of 37.00 °C to Kelvin: T = 37.00 °C + 273.15 = 310.15 K.

Use the previously calculated molarity: Molarity = 17.697 M.

Substitute the values into the osmotic pressure formula: π = (17.697 M) * (0.0821 L·atm/(mol·K)) * (310.15 K) = 452.28 atm.

To learn more about molarity, here

https://brainly.com/question/31545539

#SPJ4

According to its Lewis structure, how will sodium interact with chlorine? -Sodium will transfer one electron to the chlorine atom. -Chlorine will share four electrons with sodium to make a double bond. -Sodium will transfer two electrons to the chlorine. -Chlorine will share two electrons with the sodium to make a single bond.

Answers

According to its Lewis structure, sodium will interact with chlorine through the transfer of one electron.

Sodium, with its one valence electron, tends to lose that electron to achieve a stable, noble gas configuration. Chlorine, on the other hand, with its seven valence electrons, tends to gain one electron to achieve a stable configuration.

Therefore, sodium transfers one electron to chlorine, resulting in the formation of an ionic bond. This electron transfer allows sodium to attain a stable, full outer electron shell (similar to neon), while chlorine achieves a stable configuration (similar to argon).

The resulting sodium ion (Na⁺) and chloride ion (Cl⁻) attract each other due to their opposite charges, forming an ionic compound known as sodium chloride (NaCl).

To know more about the Lewis structure refer here,

https://brainly.com/question/29756546#

#SPJ11

How many moles of oxygen gas are present if the gas has a volume of 434.0 mL and pressure of 1.84 atm at 49.2
∘C∘C
?
Assume that the oxygen behaves as an ideal gas and use the gas constant of
R=0.0821L⋅atmmol⋅KR=0.0821L⋅atmmol⋅K

Answers

To find the number of moles of oxygen gas, we can use the Ideal Gas Law equation, which relates the pressure, volume, temperature, and number of moles of a gas.

The Ideal Gas Law equation is:

PV = nRT

Given:

V = 434.0 mL = 0.434 L (volume)

P = 1.84 atm (pressure)

T = 49.2 °C + 273.15 = 322.35 K (temperature)

R = 0.0821 L·atm/mol·K (gas constant)

Let's rearrange the equation to solve for n (number of moles):

n = PV / RT

n = (1.84 atm * 0.434 L) / (0.0821 L·atm/mol·K * 322.35 K)

n ≈ 0.0359 moles

Therefore, there are approximately 0.0359 moles of oxygen gas present.

d. A student used a different calibration curve to determine the mass of sugar in a 100.0 mL sample of Gatorade to be 6.95 g. How many grams sugar would be in a 12 oz. bottle of this Gatorade?

Answers

The mass of sugar in a 12 oz. bottle of Gatorade is approximately 2.47 grams, based on the given calibration curve and volume conversion.

To determine the mass of sugar in a 12 oz. bottle of Gatorade, we can use the information provided:

The student determined that the mass of sugar in a 100.0 mL sample of Gatorade is 6.95 g.1 L is equal to 33.8 oz.

First, we need to convert the volume of the 12 oz. bottle to liters:

12 oz * (1 L / 33.8 oz) = 0.355 L

Next, we can use the ratio of the mass of sugar in the 100.0 mL sample to calculate the mass of sugar in the 0.355 L bottle:

(6.95 g / 100.0 mL) * 0.355 L = 2.47 g

Therefore, there would be approximately 2.47 grams of sugar in a 12 oz. bottle of Gatorade.

To know more about the Gatorade refer here,

https://brainly.com/question/4512508#

#SPJ11

Complete question :

A student used a different calibration curve to determine the mass of sugar in a 100.0 mL sample of Gatorade to be 6.95 g. How many grams sugar would be in a 12oz. bottle of this Gatorade? 1 L = 33.8 oz.

What is the electronic geometry of \( \mathrm{IF}_{5} \) ? Choose one: A. seesaw B. tetrahedral C. linear D. octahedral

Answers

The electronic geometry of IF5 is: octahedral. The correct option is (D).

The electronic geometry of a molecule refers to the arrangement of electron groups (both bonding and non-bonding) around the central atom.

To determine the electronic geometry of IF5, we need to consider the number of bonding pairs and lone pairs of electrons around the central iodine (I) atom.

In IF5, iodine (I) is the central atom and it is bonded to five fluorine (F) atoms. Each fluorine atom contributes one bonding pair of electrons to form a single bond with iodine. Therefore, there are a total of five bonding pairs around the central iodine atom.

Now, let's consider the number of lone pairs of electrons on iodine. Iodine has seven valence electrons. Since there are five bonding pairs, the remaining two electrons are placed as lone pairs on the iodine atom.

The presence of both bonding and lone pairs of electrons around the central atom determines the electronic geometry. In the case of IF5, with five bonding pairs and two lone pairs, the arrangement of these electron groups is octahedral.

Therefore, the electronic geometry of IF5 is octahedral (D).

To know more about "Iodine" refer here:

https://brainly.com/question/32506187#

#SPJ11

Which of the following is the strongest base? \( \mathrm{CH}_{3} \mathrm{NH}_{2} \) \( \mathrm{NaNO}_{3} \) \( \mathrm{NH}_{3} \) \( \mathrm{Ca}(\mathrm{OH})_{2} \)

Answers

The strongest base in the list is Ca(OH)2.

What is a base?

In the realm of chemistry, a base is a substance that engages in a reaction with an acid, resulting in the formation of a salt and water. Bases can be classified using three distinctive perspectives:

Arrhenius bases: Arrhenius bases encompass substances that generate hydroxide ions (OH-) when dissolved in water.

Bronsted-Lowry bases: Bronsted-Lowry bases denote substances that embrace protons (H+) in an aqueous solution.

Lewis bases: Lewis bases refer to substances that generously bestow electrons to other substances.

Some examples of bases encompass sodium hydroxide (NaOH), potassium hydroxide (KOH), and ammonia (NH3). Bases are often characterized by a smooth and sleek texture upon touch, an acrid taste, and the ability to turn red litmus paper into a vivid shade of blue.

Learn about base here https://brainly.com/question/30394848

#SPJ4

13. Draw the Newman projection of the conformer of the following compound where the two methyl groups are anti. 14. which of the following is a boat conformation of cyclohexane? A. B. C. D. 15. Draw in all of the axial hydrogens on the cyclohexane chair conformation shown. 16. Draw both chair conformers of the following compound and determine which is more stable. 2pts OH 17. Which is the least stable chair conformer of the following compound? Yo A. B. C. D. 18. Draw the most stable chair conformer of the following compound.

Answers

13) The Newman projection of the compound is shown in the image attached

14) The boat conformation of cyclohexane is option A

15) The axial hydrogens of cyclohexane are shown in the image attached

16) The chair conformers of cyclohexanol are shown in the image attached. The one with hydrogen in equatorial position is more stable.

17) The least stable chair conformation is option D

What is a Newman projection in chemistry?

13) A Newman projection is a type of representation used in organic chemistry to visualize the conformational structure of a molecule, particularly those with carbon-carbon (C-C) single bonds. It provides a simplified, two-dimensional view of the molecule along a specific axis, known as the Newman axis.

14) In the boat conformation, two of the carbon atoms in the ring are slightly above or below the plane formed by the other four carbon atoms. These carbon atoms are referred to as the "flagpole" carbons.

15) Axial hydrogens refer to the hydrogen atoms in a cyclohexane ring that are oriented vertically above or below the plane of the ring.

16)  The chair conformation minimizes steric strain or repulsion between atoms or groups in the molecule. By adopting the chair conformation, the bulky substituents or groups attached to the carbon ring are positioned as far apart as possible, reducing steric hindrance and strain.

17) From the images, the  least stable chair conformation is option D

Learn more about Newman projection:https://brainly.com/question/24608677

#SPJ4

An element has an average atomic mass of 174.99 amu and exists in two isotopes. One of the isotopes has mass 127amu with 27.41% abundance. What is the mass of the second isotope? Round to the nearest whole number.

Answers

The second isotope of the element has a mass of approximately 189 amu. This can be determined by using the weighted average formula and the given information about the mass and abundance of the first isotope.

To find the mass of the second isotope, we can use the weighted average formula for calculating average atomic mass. The formula is as follows:

Average atomic mass = (mass of isotope 1 * abundance of isotope 1) + (mass of isotope 2 * abundance of isotope 2)

Average atomic mass = 174.99 amu

Mass of isotope 1 = 127 amu

Abundance of isotope 1 = 27.41%

Let's assume the mass of the second isotope is "x" amu, and the abundance of the second isotope is (100% - 27.41%) = 72.59%.

Plugging in the given values into the formula, we have:

174.99 amu = (127 amu * 27.41%) + (x amu * 72.59%)

Simplifying the equation:

174.99 = 34.79107 + 0.7259x

Rearranging the equation:

0.7259x = 174.99 - 34.79107

0.7259x = 140.19893

x ≈ 193.1 amu

Rounding the mass of the second isotope to the nearest whole number, we get approximately 189 amu.

Learn more about isotope here: brainly.com/question/27475737

#SPJ11

A solution has a pOH of 9.36. What is the [H +
]of the solution? a. −0.67M b. 4.37×10 −10
M c. 2.29×10 −5
M d. 4.37×10 −4
M e. 0.67M

Answers

The [H⁺] of the solution with a pOH of 9.36 is approximately 2.29 × 10⁵ M, indicating a low concentration of H⁺ ions. The correct option is (c) 2.29 × 10⁻⁵ M.

To determine the [H⁺] of a solution based on its pOH, we can use the relationship between pOH, pH, and [H⁺]. The formula is as follows:

pOH = -log[OH⁻]

pH = 14 - pOH

[tex]\[[H^+] = 10^{-pH}\][/tex]

Given that the solution has a pOH of 9.36, we can calculate the pH using the equation pH = 14 - pOH:

pH = 14 - 9.36

pH = 4.64

Finally, we can calculate the [H⁺] using the equation [tex]\[[H^+] = 10^{-pH}\][/tex]:

[tex]\[[H^+] = 10^{-4.64}\][/tex]

[H⁺] ≈ 2.29 × 10⁻⁵ M

Therefore, the [H⁺] of the solution is approximately 2.29 × 10⁻⁵ M. The correct option is (c) 2.29 × 10⁻⁵ M.

To know more about the pH refer here,

https://brainly.com/question/15289741#

#SPJ11

A kinetic study is done to investigate the following reaction: 2O 3

⟶3O 2

A proposed mechanism is: Step 1. Step 2. ​
O 3

O 2

+O
O 3

+O⟶2O 2


fast in both directions slow ​
(a) Does this mechanism account for the overall reaction? (b) What experimental rate law would be observed if this mechanism is correct? Complete the rate law in the box below. Do not use reaction intermediates and remember that a superscript ' 1 ' is not written.

Answers

(a) Yes, the proposed mechanism accounts for the overall reaction.

(b) The experimental rate law would be first-order with respect to [O3] and second-order with respect to [O].

(a) To determine whether the proposed mechanism accounts for the overall reaction, we need to examine if the elementary steps of the mechanism add up to give the balanced overall reaction. Let's analyze each step:

Step 1: O3 → O2 + O (fast)

Step 2: O3 + O → 2O2 (slow)

Adding these steps together, we obtain:

2O3 → 3O2

The overall reaction is indeed accounted for by the proposed mechanism since the sum of the elementary steps yields the balanced equation. Therefore, the mechanism is consistent with the overall reaction.

(b) To determine the experimental rate law, we can use the rate-determining step (RDS), which is the slowest step in the mechanism. In this case, the slow step is Step 2:

O3 + O → 2O2 (slow)

The rate of the overall reaction is determined by the rate of this slow step. The rate of the slow step can be expressed as:

rate = k[O3][O]

where k is the rate constant, [O3] is the concentration of O3, and [O] is the concentration of O.

Since the stoichiometry of the slow step is 1:1 for O3 and O, the rate law becomes:

rate = k[O3][O]

This indicates that the reaction is first-order with respect to [O3] and second-order with respect to [O]. The overall reaction is therefore second-order.

In summary, the proposed mechanism accounts for the overall reaction, and the experimental rate law for this mechanism is rate = k[O3][O], indicating first-order dependence on [O3] and second-order dependence on [O].


To learn more about rate law click here: brainly.com/question/14821651

#SPJ11

Seeking help with practice problem #6
6. Draw both chair conformations for the following cyclohexane and indicate which one is favored. ç

Answers

Due to the minimization of the ring strain, the chair conformation is favored.

What are the conformations of cyclohexane?

Six-membered carbon ring cyclohexane can exist in two chair conformations, depending on the axial and equatorial locations of the substituents.

In the axial position, substituents are orientated outward in a more horizontal orientation, while in the equatorial position, they are oriented vertically above and below the plane of the ring.

The ring strain that is minimized by the preferred chair conformation is the steric strain brought on by interactions between substituents. Because it lessens steric hindrance between adjacent substituents, the equatorial position is typically favored.

Learn more about cyclohexane:https://brainly.com/question/30230108

#SPJ4

1-hexanal is treated with PCC: followed by normal work mp. That product is then reacted with ethyl magnesium bromide followed by acidie work-up. The produet is... None of these 3-nonone 3-nonanol 3-octanol 3-octone

Answers

The product obtained after treating 1-hexanal with PCC (pyridinium chlorochromate), followed by reaction with ethyl magnesium bromide and acid work-up, is 3-octanol.

1-hexanal is an aldehyde with the molecular formula C₆H₁₂O. When it is treated with PCC (pyridinium chlorochromate), it undergoes oxidation to form the corresponding carboxylic acid. However, in this case, after treating with PCC, the product is subjected to further reactions.

When the PCC product reacts with ethyl magnesium bromide (Grignard reagent), it undergoes nucleophilic addition to form an alcohol. In this case, the ethyl group from ethyl magnesium bromide adds to the carbonyl carbon of the PCC product, resulting in the formation of a new carbon-carbon bond.

The resulting product after the reaction with ethyl magnesium bromide is 3-octanol (C₈H₁₈O). It has an alcohol functional group (-OH) attached to a carbon chain with eight carbon atoms (oct-).

Therefore, the correct answer is 3-octanol.

learn more about nucleophilic addition here:

https://brainly.com/question/32657850

#SPJ11

How many grams per day of deuterium (H-2) would be needed to obtain 3000 MWd for a fusion reactor where the following reaction is used? 2H - He + 23.85 MeV

Answers

To obtain 3000 MWd (megawatt-days) in a fusion reactor using the reaction 2H₂ → He + 23.85 MeV, approximately 6.6 grams per day of deuterium (H₂) would be needed.

In the given reaction, two deuterium atoms (2H₂) combine to form a helium atom (He) and release 23.85 MeV of energy. To calculate the amount of deuterium required to obtain a certain amount of energy, we need to consider the energy released per mole of deuterium.

Energy released per mole of deuterium = 23.85 MeV

Conversion factor: 1 MeV = 1.602 × 10⁻¹³ J

Conversion factor: 1 MWd = 3.6 × 10¹² J

Molar mass of deuterium (H₂) = 4.03 g/mol

Amount of deuterium required:

= (3000 MWd) * (3.6 × 10¹² J/MWd) / (23.85 MeV) * (1.602 × 10⁻¹³ J/MeV) * (4.03 g/mol) = 6.6 grams per day of deuterium

learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ4

When ethylene is polymerized by free-radical initiation, what type of polyethylene is formed?a high-density; unbranched and highly linear b high-density; highly crystalline c low-density; highly branched d high-density; highly branched e low-density; unbranched and highly linear

Answers

The type of polyethylene formed when ethylene is polymerized by free-radical initiation is low-density; highly branched (option c).

During the free-radical polymerization of ethylene, the polymerization process leads to the formation of branched chains. The presence of branching in the polymer structure prevents the polymer chains from packing closely together, resulting in a low-density polyethylene. The branching occurs due to the random incorporation of small amounts of other monomers or reaction byproducts during the polymerization process.

High-density polyethylene (HDPE), on the other hand, is formed through a different polymerization mechanism called coordination polymerization. HDPE is characterized by unbranched and highly linear polymer chains, resulting in a higher density and more crystalline structure compared to low-density polyethylene (LDPE).

Therefore, in the free-radical polymerization of ethylene, the type of polyethylene formed is low-density, highly branched polyethylene (option c).

learn more About polyethylene Here:

https://brainly.com/question/29412928

#SPJ11

In a cell culture experiment involving ATM/ATR Signaling Pathway on Mancozeb Triggered Senescence Cell Death in PC12 Cells, results from treating the membrane (Gel electrophoresis) with p-ATM Ser 1981 monoclonal and Total ATM 5C2 monoclonal antibodies show bands around 250kDa and 20kDa. How does these results coincide with the known molecular weight of ATM that is 350kDa and what does it say about the experiment?

Answers

ATM (Ataxia-Telangiectasia Mutated) and ATR (Ataxia-Telangiectasia and Rad3-related) are two essential kinases involved in DNA damage response. An experiment was conducted to determine the role of the ATM/ATR signaling pathway in mancozeb-triggered senescence cell death in PC12 cells.

The expected molecular weight of ATM is 350 kDa, according to previous research. The molecular weight of a protein is a crucial indicator in determining the molecular identity of a protein. As a result, the researchers performed a Western Blot experiment using total ATM 5C2 monoclonal and p-ATM Ser 1981 monoclonal antibodies to determine if the observed bands correspond to the molecular weight of ATM. The results of the Western Blot analysis show that bands around 250 kDa and 20 kDa were seen for p-ATM Ser 1981 monoclonal and Total ATM 5C2 monoclonal antibodies.

These outcomes do not align with the previously established molecular weight of ATM. As a result, we can say that the observed band is not ATM, and further experiments are required to discover the protein responsible for these bands and its role in the ATM/ATR signaling pathway.The experiment's results could be caused by the following: the existence of proteolytic cleavage that cuts off some parts of ATM, resulting in the loss of molecular weight. It's possible that the experiment was conducted under denaturing conditions, which may have affected the molecular weight of ATM. The experiment could have used a low concentration of the antibody. All of these factors could have affected the experiment's results.

To know more about PC12 cells visit:-

https://brainly.com/question/22401209

#SPJ11

A solution is made by titrating 328.6 mL of 0.8921HClO 2

( K a

=1.09×10 −2
M) with 75.2 mL of 0.1515MCsOH. What was the pH of this solution before any chlorous acid was added? Question 4 A solution is made by titrating 99.29 mL of 0.5434MHSO 4


(K a

=1.2×10 −2
M) with 99.29 mL of 0.5434MNaOH. What is the pH at the endpoint of this titration?

Answers

The pH of the solution before any chlorous acid was added is approximately 13.181 and the pH at the endpoint of this titration is 7.

We are titrating HClO₂ (chlorous acid) with CsOH (cesium hydroxide).

The balanced equation:

HClO₂ + CsOH → CsClO₂ + H₂O

CsOH is a strong base, so it will dissociate completely in water:

CsOH → Cs⁺ + OH⁻

Since we know the concentration of CsOH and the volume used, we can calculate the number of moles of CsOH used.

Volume of CsOH solution = 75.2 mL = 0.0752 L

Concentration of CsOH = 0.1515 M

Number of moles of CsOH = concentration × volume

                     = 0.1515 M × 0.0752 L

Now, since CsOH dissociates completely, the concentration of hydroxide ions (OH⁻) is equal to the concentration of CsOH.

[OH⁻] concentration = 0.1515 M

Next, we can calculate the pOH using the formula:

pOH = -log₁₀([OH⁻] concentration)

pOH = -log₁₀(0.1515) ≈ 0.819

Finally, we can calculate the pH using the equation:

pH = 14 - pOH

pH = 14 - 0.819 ≈ 13.181

Therefore, the pH of the solution before any chlorous acid was added is approximately 13.181.

We are titrating H₂SO₄ (sulfuric acid) with NaOH (sodium hydroxide).

The balanced equation:

H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O

The titration involves equal volumes of 0.5434 M H₂SO₄ and 0.5434 M NaOH.

Since the volumes are the same therefore, at the endpoint of the titration, all the H₂SO₄ will react with NaOH, resulting in a neutral solution.

A neutral solution has a pH of 7.

Therefore, the pH at the endpoint of this titration is 7.

Learn more about titration, here:

https://brainly.com/question/31483031

#SPJ4

how
many valence electrons in (CH3C(O)CN)

Answers

The molecule (CH3C(O)CN) has 26 valence electrons, considering the valence electrons of each atom in the molecule.

To determine the number of valence electrons in a molecule, you need to consider the valence electrons of each atom and account for any charges or bonds present.

In (CH3C(O)CN), let's break down the molecule:

- Carbon (C) has 4 valence electrons.

- Hydrogen (H) has 1 valence electron.

- Oxygen (O) has 6 valence electrons.

- Nitrogen (N) has 5 valence electrons.

Now, let's count the number of each atom present in the molecule:

- (CH3) group has 1 Carbon (C) and 3 Hydrogen (H) atoms.

- C(O) group has 1 Carbon (C) and 1 Oxygen (O) atom.

- CN group has 1 Carbon (C) and 1 Nitrogen (N) atom.

Adding up the valence electrons:

1 Carbon (C) atom in (CH3) group: 4 valence electrons

3 Hydrogen (H) atoms in (CH3) group: 3 valence electrons

1 Carbon (C) atom in C(O) group: 4 valence electrons

1 Oxygen (O) atom in C(O) group: 6 valence electrons

1 Carbon (C) atom in CN group: 4 valence electrons

1 Nitrogen (N) atom in CN group: 5 valence electrons

Total valence electrons: 4 + 3 + 4 + 6 + 4 + 5 = 26 valence electrons

Therefore, there are 26 valence electrons in (CH3C(O)CN).

To know more about electrons, click here:

brainly.com/question/12001116

#SPJ11

A student was trying to determine the molar mass of an unknown, non-dissociating liquid by freezing point depression. They found that their thermometer measured the freezing point of water to be 1.2 ∘
C. When they added 10.0 g of the unknown to an ice-water mixture, the lowest recorded temperature was recorded as −1.9 ∘
C. The solution was poured through a Buchner funnel into a tared beaker and the mass of the solution was found to be 85.6 g. The freezing point constant of water is 1.86 ∘
C/m. a) What was the freezing point depression (Δt) ? ∘
C b) What was the molality (m) of the solution? Report your answer to 2 digits behind the decimal point, and use this number in further calculations c) What was the mass of water in the solution? g d) How many moles of the unknown are present in the solution? mol Report your answer to 3 digits behind the decimal point e) What is the molar mass of the unknown? g/mol Report your answer to 1 digit behind the decimal point

Answers

Student used freezing point depression to determine unknown liquid's molar mass, but inconsistent data led to invalid results.

To solve the problem, let's use the following formulas and steps:

a) The freezing point depression (Δt) is calculated as Δt = T_f - T_i, where T_f is the freezing point of the solution and T_i is the freezing point of the pure solvent (water).

Given:

T_f = -1.9 °C

T_i = 1.2 °C

Δt = -1.9 °C - 1.2 °C = -3.1 °C

b) The molality (m) of the solution can be calculated using the formula: m = Δt / K_f, where K_f is the freezing point constant of water.

Given:

K_f = 1.86 °C/m

m = (-3.1 °C) / (1.86 °C/m) ≈ -1.67 m

Note: Negative molality values are not physically meaningful. Please double-check the given values.

c) To determine the mass of water in the solution, we need to subtract the mass of the unknown from the total mass of the solution.

Given:

Mass of the solution = 85.6 g

Mass of the unknown = 10.0 g

Mass of water = Mass of the solution - Mass of the unknown

Mass of water = 85.6 g - 10.0 g = 75.6 g

d) To find the moles of the unknown, we can use the formula: moles = m * (mass of water in grams / molar mass of water).

Given:

Mass of water = 75.6 g

Molar mass of water = 18.015 g/mol

moles of the unknown = -1.67 m * (75.6 g / 18.015 g/mol) ≈ -6.99 mol

Note: Negative moles are not physically meaningful. Please double-check the given values.

e) The molar mass of the unknown can be calculated using the formula: molar mass = (mass of the unknown / moles of the unknown).

Given:

Mass of the unknown = 10.0 g

molar mass of the unknown = 10.0 g / (-6.99 mol) ≈ -1.43 g/mol

Note: Negative molar mass values are not physically meaningful. Please double-check the given values.

To know more about molar, click here:

brainly.com/question/31545539

#SPJ11

Other Questions
Show that the Tychonoff plank T is C*-embedded in its one pointcompactification T*If you do not understand this question please do not answer. Inthe previous answer the person was unethical in atte Find all solutions of the equation in the interval [0, 2pi). 3 csc 0-2=0 Write your answer in radians in terms of . If there is more than one solution, separate them with commas. What should a well-written essay include? Select 4 options.an introductory paragrapha thesis statementsupporting detailsscientific languagepersonal examplesa concluding paragraph A mosaic like this one was made fromsplashes of wall paint.small, colored tiles.pieces of marble.pieces of bronze. The following information applies to Question 12 and Question 13. The price of a non-dividend paying stock is $13. The price of a 5-month European call option with strike $14 on the stock is $3 and the price of the corresponding European put option is $4. The continuously compounded risk-free rate is 4,7% per annum for all maturities. D Question 12 2 pts Show that there exists an arbitrage opportunity. Question 13 Construct the arbitrage portfolio and compute the resulting profit per call option used. while performing a well-child assessment on a 5 year old, the nurse notes the presence of palpable, bilateral, cervical, and inguinal lymph nodes. they are approximately 0.5 cm in size, round, mobile, and nontender. the nurse suspects that this child: Before projects are adopted there is need for the stakeholders to understand the external andinternal environments. Comment on the tools and techniques that can be utilised in order todetermine the external and internal factors for this project 2. (R7) Give a description of the language described by the following regular expression. (0/1)(0/1)(0/1))* 3. (R10) Give a regular expression which describes the language given below. L1 = {w {a, b}* | w starts with an a or ends with a b} ladi is a supermarket chain whose electronic payment processing system was breached by hackers on december 15, 2020. the hackers stole 5 million credit and debit card numbers, expiration dates, and security codes, but not customer names. on january 15, 2021, visa notified ladi that ladi's system had been breached. ladi contained the breach on january 20. ladi issued a press release stating that between december 15, 2020, and january 20, 2002, the security of its information technology systems had been breached, leading to the theft of 5 million debit card and credit card numbers belonging to individuals who had made purchases at its stores, it already received reports of approximately 3,600 cases of fraud resulting from the theft of those numbers. a number of affected customers sued ladi for breach of an implied contract to recover losses arising out of the unauthorized use of their credit and debit card data. the damages included the cost of replacement card fees when the issuing bank declined to issue a replacement card to them, fees for accounts overdrawn by fraudulent charges, fees for altering pre-authorized payment arrangements, loss of accumulated reward points, inability to earn reward points during the transition to a new card, emotional distress, time and effort spent reversing unauthorized charges and protecting against further fraud, and the cost of purchasing identity theft/card protection insurance and credit monitoring services. did ladi breach an implied contract with its customers? if so, what was the implied contract? Apply the altemating series test to the serios \[ \sum_{n=2}^{\infty}(-1)^{n} \frac{\ln (6 n)}{n} \text {, } \] First, let \( b_{n}= \) e? ? which inhabitant of the community is most likely to be impacted the most by a bullfrog invasion Construct Parametric Equation Describing The Graph Of The Line With The Following Attributes. Slope =5 And Passing Through The joint occurrence of the two characteristics X and Y is recorded by the frequency table below (absolute frequencies from a total of 200 observations): (PLEASE SHOW FORMULAS AND STEPS)MONITOR VALUESy1 = -2y2 = 0y3 = 3SUMDISTRIBUTION (%)x1 = 03010x2 = 220SUM200DISTRIBUTION50%20% a) Calculate all the missing information in the table.b) Determine the mode and the median of both characteristics.c) Give the conditional distribution of the variable X if Y realizes the value 3, i.e. h(X | y3=3).d) Are X and Y independent of each other?e) Now calculate the chi-square coefficient and the Pearson contingency coefficient from the above values.Chi-Square Coefficient =Pearson's coefficient = Explain what it means to understand what the GDP is and how does it either influence businesses or create a negative economy, such as during the four different phases of the business cycles addressing each different phase? Write a swift function to receive two parameters and increase the value of first number by the 5 and decrease the value of the second one by 10 and then return the value of modules between the first and second parameter (FNumber%SNumber). Solution Rashida purchases a house for $260,000 and takes a mortgage for the full amount. Her mortgage charges 3% per year and interest is compounded monthly. She will repay the loan over 25 years with equal monthly payments. How much of the 1 st payment would be applied toward interest and how much of the 1st payment would be principal? Click here to access the TVM Factor Table calculator. Interest =$ Principal =$ Carry all interim calculations to 5 decimal places and then round your final answers to a whole number. The tolerance is 2. A 20-bbl influx of 9.0-lbm/gal salt water enters a 10,000-ft well containing 10-1bm/gal mud. The an- nular capacity is 0.0775 bbl/ft opposite the drillpipe and 0.0500 bbl/ft opposite the 600 ft of drill collars. The capacity factor inside the drillpipe is 0.01776 bbl/ft, and the capacity factor inside the drill collars is 0.008 bbl/ft. The formation pressure is 6,000 psia. Compute the shut-in drillpipe and casing pressure that would be observed after the kick entered the well. Answer: 785 psig; 806 psig. Compute the surface annular pressure that would be observed when the top of the saltwater kick reaches the surface if the mud density is in- creased to the kill mud density before circulation of the well. Answer: 208 psig. Compute the total pit gain that would be observed when the top of the kick reaches the sur- face. Answer: 20 bbl. Compute the surface annular pressure that would be observed if the kick was methane gas in- stead of brine. Answer: 1,040 psig. Compute the surface annular pressure that would be observed if the kick was methane gas and the annular capacity was 0.1667 bbl/ft instead of 0.0775 bbl/ft. Assume the gas density is negligible. Answer: 684 psig. What are two important strategies for managing your jobsearch?What items should be included in your Career Management FilesBinder? How will the binder be useful to you throughout yourcareer? A monopoly is considering selling several units of a homogeneous product as a single package. Analysts at your firm have determined that a typical consumers demand for the product is Qd = 60 0.25P, and the marginal cost of production is $80.a. Determine the optimal number of units to put in a package.40 correct.unitsb. How much should the firm charge for this package?$__________ 1) From what life-threatening episode(s) is Moses delivered in the stories about his origins (Exod 1:1-2:25) (Select all that apply)?a.Herods command to have Hebrew boys exterminatedb.Pharaohs command to have Hebrew boys exterminatedc.The annual flood of the Niled.Pharaohs desire to kill him for killing an Egyptiane.Egyptian military forces