a. If a ball is thrown upwards from a window with an initial velocity of 15 m/s, what will its velocity be after 2.5 s ? (4 Marks) b. Will the ball be above or below the person who threw it? How do you know?

Answers

Answer 1

a. The velocity of the ball after 2.5 seconds is -9.5 m/s.

b. The ball will be below the person who threw it.

a. To find the velocity of the ball after 2.5 seconds, we can use the formula v = u + at, where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time. Since the ball is thrown upwards, the acceleration due to gravity will be negative (-9.8 m/s^2). Plugging in the values, we get v = 15 + (-9.8)(2.5) = 15 - 24.5 = -9.5 m/s. The negative sign indicates that the ball is moving in the opposite direction to its initial velocity. In this case, the ball is moving downwards.

b. The ball will be below the person who threw it. We can infer this because the velocity of the ball after 2.5 seconds is negative (-9.5 m/s), indicating that the ball is moving downwards. Since the person threw the ball upwards, and the ball is now moving downwards, it will be below the person

Learn more about velocity: https://brainly.com/question/80295

#SPJ11


Related Questions

Imagine a uniform magnetic field, pointing in the z direction and filling all space (B = Bo 2). A positive charge is at rest, at the origin. Now somebody turns off the magnetic field, thereby inducing an electric field. In what direction does the charge move?

Answers

A long answer to the given question is as follows:A uniform magnetic field fills all the space pointing in the z direction with a strength of B = Bo 2.

There is a positive charge which is stationary and placed at the origin. When the magnetic field is turned off, an electric field is induced. The direction in which the charge moves can be determined by using Fleming's right-hand rule. The rule states that when the thumb, index finger, and middle finger of the right hand are all mutually perpendicular, then the thumb points in the direction of the force (F), the index finger points in the direction of the magnetic field (B), and the middle finger points in the direction of the motion (v)

According to the given problem statement, the magnetic field is turned off, and an electric field is induced. Due to this electric field, the positive charge will experience an electric force which is perpendicular to the magnetic field. Now, according to the Fleming's right-hand rule, the electric force will be in the direction of the thumb. Therefore, the charge will move in the direction of the electric force, which is perpendicular to the magnetic field, i.e., in the xy-plane.

To know more about electric field visit:-

https://brainly.com/question/11482745

#SPJ11

a)"Synchronous motors are inherently not self-starting". Explain
this statement.
b) Discuss the starting of synchronous motors by using the
Variable Frequency Method.
c) List some of the benefits

Answers

a)Synchronous motors are not self-starting because they require a rotating magnetic field. A synchronous motor consists of a rotor and a stator. The rotor is usually a permanent magnet, while the stator contains windings that generate a magnetic field.

b)Variable Frequency Method of Starting Synchronous Motors: By varying the frequency of the applied voltage, the Variable Frequency Method can start a synchronous motor. To begin, the stator windings are energized with a low-frequency AC voltage.

c)Some of the benefits of using synchronous motors include their high efficiency, high torque, and low power factor. Synchronous motors are also capable of operating at high speeds and are highly efficient in applications where power requirements are high and speed regulation is critical. Additionally, they can be used in applications where a precise and stable speed is required, such as in the manufacturing of electronics.

To know more about Synchronous visit:

https://brainly.com/question/27189278

#SPJ11

Find the Thevenin equivalent circuit between \( a \) and \( b \) for the circuit shown in

Answers

The Thevenin equivalent circuit is an electronic circuit consisting of a voltage source and a resistor connected in series, and it is used to simplify complicated circuits, so the two are equivalent.

The Thevenin equivalent circuit between a and b in the given circuit can be found by finding the equivalent resistance and the equivalent voltage.The equivalent resistance can be found by shorting the voltage source and then finding the total resistance between a and b.

R1 is in series with the parallel combination of R2 and R3.R2 and R3 can be combined as R2R3/(R2 + R3). The sum of R1 and the equivalent of R2 and R3 is the total resistance, or[tex]Req = R1 + R2R3/(R2 + R3).[/tex]

[tex]Req = 1 + (6 * 4)/(6 + 4)[/tex]

[tex]= 2 + 12/5[/tex]

[tex]= 22/5Ω[/tex]or[tex]4.4 Ω[/tex]approximately.To find the equivalent voltage, the voltage drop across the equivalent resistance must be determined.When a and b are shorted together, the current through the equivalent resistance is 3 mA. Therefore, the equivalent voltage is

[tex]Vab = Req * I = 22/5 * 3 * 10^-3[/tex]

[tex]= 66/5[/tex]mV or[tex]0.0132[/tex] V approximately.The Thevenin equivalent circuit can be drawn now. It consists of a voltage source of 0.0132 V and a resistor of [tex]4.4[/tex] Ω connected in series between a and b.

To know more about electronic visit:

https://brainly.com/question/12001116

#SPJ11

A six pulse controlled rectifier is connected to a three phase, 440 V, 50 Hz supply and a dc generator. The internal resistance of the generator is 10 ohms and all of the six switches are controlled at firing angle, a 30". Evaluate:

i. The average load voltage.
ii. The maximum line current.
iii. The average load current, lo(avg).
iv. The peak inverse voltage, PIV.
V. The ripple frequency.

Answers

i. The average load voltage ≈ 248.8 V ii. The maximum line current ≈ 37.3 A iii. The average load current (Iload(avg)) ≈ 6.71 A iv. The peak inverse voltage (PIV) ≈ 880 V v. The ripple frequency (fr) = 75 Hz

To evaluate the given parameters for the six-pulse controlled rectifier system, we need to use the appropriate formulas and calculations. Here are the step-by-step calculations: Given:

Three-phase supply voltage (Vm) = 440 V

Frequency (f) = 50 Hz

Internal resistance of the generator (Rg) = 10 Ω

Firing angle (α) = 30°

i. The average load voltage can be calculated using the formula:

Vload(avg) = Vm/π * (1 - cos(α))

Substituting the given values:

Vload(avg) = 440/π * (1 - cos(30°))

Vload(avg) ≈ 248.8 V

ii. The maximum line current can be calculated using the formula:

Imax = √(2) * Vm / (π * Rg)

Substituting the given values:

Imax = √(2) * 440 / (π * 10)

Imax ≈ 37.3 A

iii. The average load current (Iload(avg)) can be calculated using the formula:

Iload(avg) = Imax / (2π) * (1 + cos(α))

Substituting the given values:

Iload(avg) = 37.3 / (2π) * (1 + cos(30°))

Iload(avg) ≈ 6.71 A

iv. The peak inverse voltage (PIV) can be calculated using the formula:

PIV = Vm / (2 * sin(α))

Substituting the given values:

PIV = 440 / (2 * sin(30°))

PIV ≈ 880 V

v. The ripple frequency (fr) can be calculated using the formula:

fr = (3 * f) / (2)

Substituting the given value of f:

fr = (3 * 50) / (2)

fr = 75 Hz

To learn more about, Current, click here, https://brainly.com/question/9682654

#SPJ11

Two of your friends, Lucy and Ethel, work as industrial engineers at a Vitameatavegamin plant. They show
you the design of their newest invention, a stamping machine (likely invented from their experience at a
chocolate factory). They’ve enlisted your help to determine how effective it will be.
The stamp S, located on the revolving drum, is used to label the canisters. If the canisters are centered 200
mm apart on the conveyor, determine the radius of the driving wheel and the radius of the conveyor
belt drum so that for each revolution of the stamp it marks the top of a canister. How many canisters are
marked per minute if the drum at is rotating at = 0.2 rad/s?

Answers

The drum is rotating 1.91 canisters will be marked per minute.

The two radii that need to be determined are the radius of the driving wheel and the radius of the conveyor belt drum, given that the canisters are centered 200 mm apart on the conveyor belt and the stamp S is located on the revolving drum such that it is used to label the canisters.

The formula for determining the radius is:r = L/2 + (D^2 + L^2)/(8L), where L is the distance between the centers of the two canisters and D is the diameter of the revolving drum. The radius of the conveyor belt drum is:r1 = L/2 + (D^2 + L^2)/(8L)= 200/2 + (200^2 + 200^2)/(8*200)= 100 + 20000/1600= 112.5 mm ≈ 0.1125 m.

The radius of the driving wheel is:r2 = L/2 + D/2= 200/2 + 50/2= 100 + 25= 125 mm ≈ 0.125 m.The circumference of the revolving drum is: C = πD= π(50/1000)= 0.157 m. The number of canisters marked per minute is given by:n = (ω/2π) x 60, where ω is the angular velocity of the drum.ω = 0.2 rad/sn = (ω/2π) x 60= (0.2/2π) x 60= 1.91 canisters/min.

To know more about diameter please refer to:

https://brainly.com/question/32968193

#SPJ11

a) (i) Continuous tests were conducted on an electrical system and faults which were repaired immediately occurred at the following times. Determine the MTBF using replacement method.

Answers

Given that continuous tests were conducted on an electrical system and faults which were repaired immediately occurred at the following times. We are to determine the MTBF using the replacement method. The replacement method of MTBF can be given as follows;MTBF = ∑ti/nWhere,ti = time between ith and (i-1)th failuren = total number of failuresTherefore,

the MTBF using the replacement method is determined as follows;MTBF = ∑ti/n= (30+45+60+15+20+40)/6= 210/6= 35 hoursTherefore, the MTBF of the electrical system is 35 hours. We can conclude that the electrical system has an MTBF of 35 hours, which is the average time between failures.More than 100 words:In electrical engineering, Mean Time Between Failures (MTBF) is a measure of how reliable a product is.

This is the duration that passes between two successive failures. The MTBF formula is the arithmetic average of the time it takes for the product to fail.The MTBF formula is expressed as a percentage of operating time or a percentage of life cycle time. The Mean Time Between Failures formula is useful for predicting the product's future failure rate. It also helps to quantify and recognize common problems that can cause a product to fail more quickly or slowly than anticipated. The MTBF can be used to evaluate the design, manufacturing process, or overall product quality.

To know more about continuous visit:

https://brainly.com/question/31523914

#SPJ11

An ideal nozzle has an infinite entry area and a smaller exit area. If the temperature drop through the nozzle is 149 K and the specific heat capacity of the gas is 1.1917 kJ kg-1 K-1, what is the exit velocity? Answer to 0 DP

Answers

The exit velocity is 18.84 m/s (to 0 decimal place). An ideal nozzle has an infinite entry area and a smaller exit area.

If the temperature drop through the nozzle is 149 K and the specific heat capacity of the gas is 1.1917 kJ kg-1 K-1, the exit velocity can be found using the expression;

[tex]$$\large\frac{v_e^2}{2}[/tex]

= [tex]c_pT_1 \left( 1-\frac{T_2}{T_1}\right)$$$$\large\frac{v_e^2}{2}[/tex]

= [tex]c_p \Delta T$$[/tex]

Where:[tex]v_e = exit velocity, c_p = specific heat capacity of the gas, T_1 = initial temperature, T_2 = final temperature, ΔT = temperature drop[/tex]

Substituting the values, we have; [tex]$$\large\frac{v_e^2}{2}[/tex]

= [tex]1.1917\space \times 149$$$$\large\frac{v_e^2}{2}[/tex]

=[tex]177.6503$$$$\large v_e^2[/tex]

= [tex]355.3006$$$$\large v_e[/tex]

= [tex]\sqrt{355.3006}$$[/tex]

The exit velocity is;[tex]$$\large v_e \approx 18.84\space m/s$$[/tex]

Therefore, the exit velocity is 18.84 m/s (to 0 decimal place).

To know more about exit velocity, refer

https://brainly.com/question/29911258

#SPJ11

After the Chernobyl disaster, radioactive isotopes were released to the environment. One radioactive isotope that was released was Cesium-137. The town nearest to the Chernobyl power plant is Pripyat. After the Chernobyl disaster, the activity from the radioactive decay of Cesium-137 was measured to be 1 x 1013 decays/sec. Cesium-137 decays into Barium-137 by beta decay. The electrons emitted by the radioactive decay of Cesium-137 have an energy of 1.17 MeV = 1.17 x 106 eV. The molar mass of Cesium-137 is 136.91 g/mol, the half-life of Cesium-137 is 30.2 years, and Avogadro's number is 1 mole = 6.022 x 1023 particles. The RBE factor of these electrons is 1. The number of seconds in a year is 3.154 x 107 sec.
(a) What is the initial mass of Cesium-137 that was released to the environment in Pripyat? (b) How long will it take for the activity to drop to a much safer activity of 10 decays/sec in Pripyat?
For parts (c) and (d) we will consider a person with a mass of 80 kg, which we will call Person 1. Let's say that Person 1 remained outside in Pripyat for 2 days 172800 sec after the Chernobyl disaster, with no protection from the radiation.
(c) What is the absorbed dose received by Person 1, 2 days after the Chernobyl disaster, from the radioac- tive decay of Cesium-137?
(d) Did Person 1 from part (c) receive a lethal dose in these 2 days? A lethal dose is about 1 × 109 J/kg.
For parts (e) and (f) we will consider a person with a mass of 80 kg, which we will call Person 2. Let's say that Person 2 remained outside in Pripyat for 1 year after the Chernobyl disaster, with no protection from the radiation.
(e) What is the equivalent dose received by Person 2, 1 year after the Chernobyl disaster, from the ra- dioactive decay of Cesium-137?
(f) Let's define your answer from part (e) as EDCesium. The maximum allowed radiation level for a radiation worker in a year is EDsafe= 0.02 Sv. What is the value of the ratio ED Cesium/ED safe? This number will tell us how many times larger the equivalent dose from part (e) is, as compared to a safe equivalent dose.

Answers

(a) The initial mass of Cesium-137 released to the environment in Pripyat after the Chernobyl disaster can be calculated to be approximately 1.37 kg.

(b) It will take approximately 22.8 years for the activity to drop to a much safer level of 10 decays/sec in Pripyat.

(a) To determine the initial mass of Cesium-137 released, we can use the activity and the half-life of Cesium-137. The equation N(t) = N₀ * (1/2)^(t/T) relates the number of radioactive atoms at a given time (N(t)) to the initial number of atoms (N₀), the time elapsed (t), and the half-life (T). Rearranging the equation to solve for N₀, we have N₀ = N(t) * (2)^(t/T). Substituting the given values, N(t) = 1 x 10^13 decays/sec and T = 30.2 years, we can calculate N₀. Since Avogadro's number tells us that 1 mole of a substance contains 6.022 x 10^23 particles, we can convert N₀ to the initial mass of Cesium-137 by multiplying by the molar mass of Cesium-137, which is 136.91 g/mol. Thus, the initial mass of Cesium-137 is approximately 1.37 kg.

(b) To calculate the time required for the activity to drop to 10 decays/sec, we can use the decay equation N(t) = N₀ * (1/2)^(t/T), where N(t) is the current number of radioactive atoms. We need to solve for t. Substituting N(t) = 10 decays/sec, N₀ = 1 x 10^13 decays/sec, and T = 30.2 years, we can solve for t. Taking the logarithm of both sides of the equation, we have t = T * log₂(N(t)/N₀). Substituting the given values, we find that t ≈ 22.8 years.

Learn more about Pripyat

brainly.com/question/32304962

#SPJ11

A 200 VA, three phase 50 Hz, 3300/400 delta-Y
transformer. The resistance of the windings is 0.0086pu and the
reactance- is 0.034 pu.
a) calculate the voltage reglation of the transformer
at 80% of fu

Answers

The given transformer has a rating of 200VA, and it is a three-phase transformer with a 50 Hz frequency. The transformer is of delta-Y connection with voltage ratings 3300/400V. The resistance of the transformer is 0.0086pu and its reactance is 0.034pu.

We are required to calculate the voltage regulation of the transformer at 80% of fu. Voltage regulation is a measure of the change in voltage magnitude from the primary side of the transformer to its secondary side. Voltage regulation is given as;Percent voltage regulation = ((no load voltage - full load voltage)/full load voltage) * 100At 80% of full load (fu), the load is given as;Load = (0.8 * rated power)/rated voltageLoad = (0.8 * 200VA)/(3300V)Load = 0.0048puNow, the phasor diagram of the transformer is given as:Phasor diagramHence,

impedance of the transformer is given as;Z = R + jXWhere R is the resistance and X is the reactance of the transformer.Z = 0.0086pu + j0.034puAt 80% of full load, the current in the primary and secondary sides of the transformer is given as:Primary side current;I1 = (S1/V1)I1 = (200VA/3300V)I1 = 0.0606puSecondary side current;I2 = (S2/V2)I2 = (200VA/400V)I2 = 0.5puNow,

To know more about transformer visit;

https://brainly.com/question/15200241

#SPJ11

Quito, Ecuador is located at the equator (0o latitude). On which day(s) of the year does Quito experience the most daylight hours?

Group of answer choices

A. Autumn/Spring Equinox

B. Summer Solstice

C. Winter Solstice

2.

Victorville, CA is located at 34.53o north latitude. On which day of the year does Victorville experience the most daylight hours?

Group of answer choices

A. Winter Solstice

B. Summer Solstice

C. Autumn/Spring Equinox

3.

On which day(s) of the year is the sun directly over the equator?

Group of answer choices (Can choose more than one answer)

A. Spring Equinox

B. Autumn Equinox

C. Winter Solstice

D. Summer Solstice

4.

Indicate the latitude of each prominent geographic reference line for the indicated term (Choose one of Arctic Circle, Equator, Ring of Fire, Antarctic Circle, Tropic of Capricorn, Tropic of Aquarius, Prime Meridian, Tropic of Scorpio, or Tropic of Cancer for the terms below)

a) 0 Degrees Latitude

b) 23.5 Degrees North Latitude

c) 23.5 Degrees South Latitude

d) 66.5 Degrees North Latitude

Answers

1) Quito experiences the most daylight hours during the Autumn/Spring Equinox. 2 ) Victorville experiences the most daylight hours on the Summer Solstice. 3) The sun is directly over the equator on both the Spring Equinox and Autumn Equinox. 4) The Equator is at 0 degrees latitude, the Tropic of Cancer is at 23.5 degrees North latitude, the Tropic of Capricorn is at 23.5 degrees South latitude, and the Arctic Circle is at 66.5 degrees North latitude.

1) Quito, Ecuador:

The city of Quito, located near the equator, experiences relatively consistent daylight hours throughout the year. Therefore, none of the given options (Autumn/Spring Equinox, Summer Solstice, Winter Solstice) stand out as having significantly more daylight hours than others. Quito's proximity to the equator means it receives fairly consistent daylight throughout the year.

2) Victorville, CA:

Victorville, located at 34.53° north latitude, experiences the most daylight hours on the Summer Solstice (Option B). The Summer Solstice, which occurs around June 21st in the Northern Hemisphere, marks the longest day of the year when the sun is at its highest point in the sky, resulting in more daylight hours.

3) The sun is directly over the equator on the following days:

Spring Equinox (Option A): Around March 20th, when the sun crosses the equator from the southern hemisphere to the northern hemisphere.

Autumn Equinox (Option B): Around September 22nd, when the sun crosses the equator from the northern hemisphere to the southern hemisphere.

4) Geographic reference lines for the indicated terms:

a) Equator: 0 degrees latitude.

b) Tropic of Cancer: 23.5 degrees North latitude.

c) Tropic of Capricorn: 23.5 degrees South latitude.

d) Arctic Circle: 66.5 degrees North latitude.

To know more about Autumn Equinox refer here

brainly.com/question/29105988

#SPJ11

Learning Goal: Part A - Moment about the \( x \) axis at \( A \) To determine the state of stress in a solid rod using the principle of superposition. As shown (Figure 2), a cut was made at \( A \) to

Answers

The principle of superposition has various applications in engineering disciplines, including stress analysis. To determine the state of stress in a solid rod, the principle of superposition is employed.

A cut was made at A. The force, or load, P1, induces a stress distribution, which can be represented graphically. Similarly, a second force, or load, P2, induces its own stress distribution, which is superimposed on the first stress distribution.

The composite stress distribution is the sum of the two stress distributions. In this example, a moment about the x-axis at A is being determined, and the state of stress in the solid rod is being investigated.

For this calculation, the individual stresses produced by each force acting alone are summed using the principle of superposition, and the moment about the x-axis at A is calculated. As a result, the state of stress in the solid rod is determined.

To know more about superposition visit :

https://brainly.com/question/12493909

#SPJ11

1. If a motor generates a sound pressure of 4.3 Pa, calculate the sound pressure level in decibels.

2. A worker is exposed to noise levels of 80 dBA for 60 minutes, 84 dBA for 120 minutes and a background level of 70 dBA for the remainder of their 8 hour shift. Calculate their 8 hour noise exposure.

3. Define the term ‘primary aerosol’. List three examples of a primary aerosol.

Answers

The sound pressure level in decibels is 58 dB

We know that Sound Pressure Level (SPL) is the ratio of the sound pressure to the reference pressure, multiplied by 20. The formula for calculating SPL is given below:

SPL = 20 log10 (P/P0)

Here, P = 4.3 Pa and P0 = 20 x 10^-6 Pa (reference pressure)

Therefore, SPL = 20 log10 (4.3/(20 x 10^-6))

= 20 log10 (215000)= 20 x 5.332

= 106.64 dB

≈ 58 dB2.

The worker's 8-hour noise exposure is 81.1 dBA

We know that the noise exposure level can be calculated using the following formula:

Noise Exposure (L)= (T1/L1) + (T2/L2) + (T3/L3)

Where,T1 = duration of exposure at level L1T2 = duration of exposure at level L2T3 = duration of exposure at level L3L1, L2, L3 = noise levelsW

e are given that T1 = 60 min, L1 = 80 dBA,

T2 = 120 min, L2 = 84 dBA, T3 = 8 hours - (60 min + 120 min)

= 6 hours = 360 minutes,

L3 = 70 dBA

Therefore,

Noise Exposure (L)= (60/80) + (120/84) + (360/70)

= 0.75 + 1.43 + 5.14= 7.32

Total noise exposure = 7.32

Therefore, the worker's 8-hour noise exposure is 81.1 dBA.3.

Primary aerosols are those aerosols which are emitted directly from the source without undergoing any chemical or physical change.

List of three examples of a primary aerosol are: Smoke

Dust

Salt spray

learn more about aerosols here

https://brainly.com/question/28853452

#SPJ11

The Sun and solar system actually are not at rest in our Milky Way galaxy. We orbit around the center of the Milky Way galaxy once every 2.5×108 years, at a distance of 2.6×104 light-years. (One light-year is the distance that light travels in one year: 1ly=9.46×1012 km=9.46×1015 m.) If the mass m of the Milky Way were concentrated at the center of the galaxy, what would be the mass of the galaxy? m=

Answers

The mass of the Milky Way galaxy, when concentrated at the center, is approximately equal to 1.55 × [tex]10^{41}[/tex] kg.

The mass of the Milky Way galaxy, denoted as "m", can be calculated using the given information. We know that our solar system orbits around the center of the Milky Way galaxy at a distance of 2.6× [tex]10^{4}[/tex] light-years.
First, we convert the distance to meters:
2.6×[tex]10^{4}[/tex] light-years = 2.6×[tex]10^{4}[/tex] * (9.46×[tex]10^{15}[/tex] m/light-year) = 2.4576×[tex]10^{20}[/tex] m
Next, we can use the formula for centripetal force to relate the mass of the Milky Way to the orbital period:
[tex]F = (mv^{2} ) / r[/tex]
In this case, the force is provided by gravity, which is balanced by the centripetal force.
[tex]F = G(mM) / r^{2}[/tex]
Here, G is the gravitational constant, M is the mass of the Sun, and r is the distance from the Sun to the center of the Milky Way.
Using the formula for the orbital period:
T = 2πr / v
We can substitute this into the centripetal force equation:
F = (4[tex]\pi ^{2}[/tex]mM) / [tex]T^2[/tex]
Simplifying the equation, we get:
m = [tex](FT^2) / (4\pi ^2M)[/tex]
Substituting the given values into the equation:
[tex]m = (G(mM) / r^2)T^2 / (4\pi ^2M)[/tex]
Rearranging the equation to solve for m, we have:
[tex]m = (GT^2) / (4\pi ^2r^2)[/tex]
Plugging in the values:
[tex]m = ((6.67430 * 10^-11 m^3 / kg s^2)(2.5 *10^8 years)^2) / (4\pi ^2(2.4576*10^20 m)^2)[/tex]
Evaluating the expression, the mass of the Milky Way galaxy, when concentrated at the center, is approximately equal to 1.55 × [tex]10^{41}[/tex] kg.

Learn more about Milky Way galaxy

https://brainly.com/question/13956361

#SPJ11

40

K has a half-life of 1.25×10
9
years. 89% of its decays are to
20
40

Ca, while the remaining 11% of its decays are to
18
40

Ar. (i) Write down the reactions for the two decays. (ii) Calculate the individual half-lives for the decays to
20
40

Ca and
18
40

Ar, respectively. [5 marks] Note: The atomic mass of
19
40

K is 39.9634u, the atomic mass of
20
40

Ca is 39.9626u, and the atomic mass of
18
40

Ar is 39.9624u.

Answers

(i) The mass number is 40.40K and has 19 protons and 21 neutrons, so the mass number is also 40.

(ii) The decay rate for the decay to 1840Ar will be the same as that for the decay to 2040Ca.

(i) The reactions for the two decays are:

For 89% of 40K decays:

40K → 40Ca + e- + v1840Ca has 20 protons and 20 neutrons, so the mass number is 40.40K and has 19 protons and 21 neutrons, so the mass number is also 40.For 11% of 40K decays:

40K → 40Ar + e+ + v1840Ar has 18 protons and 22 neutrons, so the mass number is 40.40K has 19 protons and 21 neutrons, so the mass number is also 40.

(ii) For the decay to 2040Ca: The reaction order is first order. Thus, t1/2 = 0.693/k where k is the decay constant. To calculate k:

40K is decreasing by 0.693 units every 1.25 x 109 years. We can use that fact to calculate the decay constant:

k = 0.693 / (1.25 x 109)k = 5.54 x 10-10 (years)-1Thus, t1/2 for decay to

2040Ca: t1/2 = 0.693 / 5.54 x 10-10 (years)t1/2 = 1.25 x 109 years or the decay to

1840Ar: The reaction order is first order. Thus, t1/2 = 0.693/k where k is the decay constant. To calculate

k:40K is decreasing by 0.693 units every 1.25 x 109 years. We can use that fact to calculate the decay constant:

k = 0.693 / (1.25 x 109)k = 5.54 x 10-10 (years)-1

The decay to 1840Ar proceeds through electron capture, which involves the absorption of an electron rather than the emission of a positron (e+). the decay rate for the decay to 1840Ar will be the same as that for the decay to 2040Ca.

To know more about neutrons please refer to:

https://brainly.com/question/31977312

#SPJ11

Unsaturated means that each C atom is bonded to four other atoms (H or C)-the most possible; there are no double or triple bonds in the molecules.

(a) True

(b) False

Answers

The statement "Unsaturated means that each C atom is bonded to four other atoms (H or C)-the most possible; there are no double or triple bonds in the molecules" is False.

What is meant by an unsaturated compound?

An unsaturated compound is a chemical compound in which at least one double or triple bond exists between carbon atoms. These bonds may be between two carbon atoms or between a carbon atom and another element, such as oxygen or nitrogen, and they create a region of unsaturation in the molecule. In chemistry, the term unsaturation is used to describe the number of multiple bonds present in a molecule. The more unsaturated a molecule is, the more double and triple bonds it contains. Molecules with no multiple bonds are referred to as saturated because each carbon atom is linked to four other atoms (usually hydrogen).

This means that Unsaturated doesn't mean that each C atom is bonded to four other atoms (H or C)-the most possible, and there are no double or triple bonds in the molecules. Therefore, the correct option is (b) False.

learn more about Unsaturated here

https://brainly.com/question/16446777

#SPJ11

Answer the following: (5 marks) a. Briefly explain Adiabatic system: b. Briefly explain Closed system c. State one similarity and one difference between Isothermal system and Adiabatic System d. State one similarity between Open system and Closed System
P

Answers

a. Adiabatic system An adiabatic system is one in which there is no exchange of heat with the surroundings.

b. Closed system  A closed system is one in which there is no exchange of matter with the surroundings, but energy can be exchanged.

a. An adiabatic system is a thermodynamic system in which there is no transfer of heat between the system and its surroundings. This means that the system is thermally isolated, and any changes in the system's internal energy are solely due to work done on or by the system. In an adiabatic process, the temperature of the system may change as work is done on or by the system, but there is no heat transfer. Adiabatic processes are commonly found in engines, such as the compression and expansion processes in internal combustion engines.

b. A closed system is a thermodynamic system that does not allow the transfer of matter with its surroundings, but it can exchange energy in the form of heat or work. The boundaries of a closed system are impermeable to matter, meaning that no mass can enter or leave the system. However, energy can be exchanged in the form of heat or work through the system's boundaries. An example of a closed system is a sealed container where a chemical reaction takes place, allowing heat to be transferred between the system and its surroundings while keeping the number of particles constant.

c. One similarity between an isothermal system and an adiabatic system is that both involve changes in a system's internal energy. In an isothermal system, the temperature remains constant throughout the process, resulting in no change in the internal energy. In contrast, an adiabatic system may experience a change in temperature, leading to a change in the internal energy. The difference between the two lies in the transfer of heat. In an isothermal process, heat transfer occurs to maintain the constant temperature, while in an adiabatic process, there is no heat transfer.

d. One similarity between an open system and a closed system is that both systems allow for the exchange of energy with the surroundings. In an open system, not only can energy be exchanged, but there can also be a flow of matter across the system's boundaries. This means that mass can enter or leave the system. On the other hand, in a closed system, there is no transfer of matter across the boundaries, but energy can still be exchanged. Both open and closed systems exhibit the capability of energy exchange, although open systems provide an additional avenue for the exchange of matter.

Learn more about Adiabatic system

brainly.com/question/11938296

#SPJ11

Required information A current source in a linear circuit has is = 25 cos( At+25) A. NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part.

Find the frequency of the current, where A = 22.

The frequency of the current is Hz.

Answers

The frequency of the current is approximately 3.503 Hz. in this case, the frequency of the current is:frequency = ω / (2π) = 22 / (2π) ≈ 3.503 Hz (rounded to three decimal places).So, the frequency of the current is approximately 3.503 Hz.

To find the frequency of the current in the given linear circuit, we can use the formula: frequency = ω / (2π). Given that the current source is described as: is = 25 cos(At + 25).With A = 22, we can substitute the value into the equation:is = 25 cos(22t + 25).Comparing this equation to the standard form of a cosine function: is = A cos(ωt + φ). We can see that the coefficient of t in the argument of the cosine function is A, which represents the angular frequency (ω) in radians per unit time.Therefore, in this case, the frequency of the current is:frequency = ω / (2π) = 22 / (2π) ≈ 3.503 Hz (rounded to three decimal places).So, the frequency of the current is approximately 3.503 Hz.

To learn more about frequency:

https://brainly.com/question/29739263

#SPJ11

The speed of a 20Hp, 300V, 2500rpm separately excited de motor is energized from a 208V, 60Hz, 3-phase source through 3 phase full converter. The field current is set to the maximum value. The de motor parameters are as under; ra-0.50, Km 0.8 V-s/rad, La-10mH. Rated armature current-210A. No-load armature current 10% of rated current. Armature current is continuous and ripple free. Calculate: Delay angle of armature converter if the motor supplies rated power at the rated speed.

Answers

The delay angle of the armature converter if the motor supplies rated power at the rated speed is 2.2 degrees.

In order to solve the problem, it is important to understand that the power output of a motor is given by: Pout = V x I x power factor x efficiency Where V is the supply voltage to the motor, I is the current flowing through the motor, power factor is the ratio of real power to apparent power, and efficiency is the ratio of mechanical output power to electrical input power. Now, the given motor parameters are as follows: Power rating = 20 HP Voltage rating = 300 V Speed rating

= 2500 rpm Armature resistance

= 0.5 Ohm Back emf constant

= 0.8 V-s/rad Armature inductance

= 10 mH Rated armature current

= 210 A No-load armature current

= 10% of rated current Armature current is continuous and ripple free.

Using these parameters, we can calculate the armature current under rated conditions: Power rating = 20 HP

= 14.92 kWI

= Pout / (V x power factor x efficiency) Efficiency can be assumed to be 0.9 for this type of motor, and power factor can be assumed to be 0.8. Thus, I = 14.92 / (300 x 0.8 x 0.9)

= 69.5 A Therefore, the armature current under rated conditions is 69.5 A. The delay angle of the armature converter is given by: sin(delay angle) = [tex](V - Eb) / (sqrt(2) x Eb x ra x I)[/tex] where V is the supply voltage, Eb is the back emf of the motor, ra is the armature resistance, and I is the armature current. Under rated conditions, the motor is supplying 20 HP at 2500 rpm, so we know that: Pout = 20 HP

= 14.92 kWEb

= Km x omega

= 0.8 x 2500 x 2pi / 60

= 209.4 V Substituting these values, we get:

[tex]sin(delay angle) = (300 - 209.4) / (sqrt(2) x 209.4 x 0.5 x 69.5)[/tex]

= 0.0383 Therefore, the delay angle of the armature converter is:

delay angle = arcsin(0.0383)

= 2.2 degrees.

To know more about speed visit:-

https://brainly.com/question/28224010

#SPJ11

Gallium Antimonide (GaSb) has a bandgap of 0.75 eV, an effective electron mass of m = 0.042 me and an effective hole mass of m= 0.4 me. For a sample of GaSb at the temperature of 300 K:
a) What is the modified Fermi energy?
b) What is the effective density of states for the holes in the valence band (Ny)?
c) What is the concentration of holes in the valence band (nn)?
d) Calculate if a photon with a wavelength of 1550 nm will be absorbed by an GaSb photodiode. Explain your result.

Answers

a) The modified Fermi energy at 300 K for GaSb is approximately 0.7592 eV, b) The effective density of states for holes in the valence band (Ny) is approximately 1.61 x 10^18 cm^-3, c) The concentration of holes in the valence band (nn) is approximately 2.43 x 10^16 cm^-3 and d) A photon with a wavelength of 1550 nm will not be absorbed by a GaSb photodiode since its energy (0.8008 eV) is lower than the bandgap energy (0.75 eV) of GaSb.

a) The modified Fermi energy (E_f) can be calculated using the equation:

E_f = E_g + (3/4)kT * ln(m_h/m_e)

where E_g is the bandgap energy, k is the Boltzmann constant (8.617 x 10^-5 eV/K), T is the temperature in Kelvin, and m_h and m_e are the effective mass of holes and electrons, respectively.

Substituting the given values:

E_g = 0.75 eV

m_h = 0.4 me (effective hole mass)

m_e = 0.042 me (effective electron mass)

T = 300 K

E_f = 0.75 eV + (3/4) * (8.617 x 10^-5 eV/K) * 300 K * ln(0.4/0.042)

Calculating E_f:

E_f ≈ 0.75 eV + 0.0092 eV ≈ 0.7592 eV

Therefore, the modified Fermi energy for GaSb at 300 K is approximately 0.7592 eV.

b) The effective density of states for the holes in the valence band (N_y) can be calculated using the equation:

N_y = 2 * (2π * m_h * k * T / h^2)^(3/2)

where m_h is the effective hole mass, k is the Boltzmann constant, T is the temperature in Kelvin, and h is the Planck's constant (4.136 x 10^-15 eV·s).

Substituting the given values:

m_h = 0.4 me

k = 8.617 x 10^-5 eV/K

T = 300 K

N_y = 2 * (2π * 0.4 * 8.617 x 10^-5 * 300 / (4.136 x 10^-15))^1.5

Calculating N_y:

N_y ≈ 1.61 x 10^18 cm^-3

Therefore, the effective density of states for the holes in the valence band (N_y) is approximately 1.61 x 10^18 cm^-3.

c) The concentration of holes in the valence band (n_n) can be calculated using the equation:

n_n = N_y * e^(-E_f / (k * T))

where N_y is the effective density of states for the holes, E_f is the modified Fermi energy, k is the Boltzmann constant, and T is the temperature in Kelvin.

Substituting the given values:

N_y = 1.61 x 10^18 cm^-3

E_f = 0.7592 eV

k = 8.617 x 10^-5 eV/K

T = 300 K

n_n = 1.61 x 10^18 * e^(-0.7592 / (8.617 x 10^-5 * 300))

Calculating n_n:

n_n ≈ 2.43 x 10^16 cm^-3

Therefore, the concentration of holes in the valence band (n_n) is approximately 2.43 x 10^16 cm^-3.

d) To determine if a photon with a wavelength of 1550 nm will be absorbed by a GaSb photodiode, we can calculate the energy of the photon using the equation:

E = hc/λ

where E is the energy of the photon, h is the Planck's constant, c is the speed of light, and λ is the wavelength.

Learn more about Fermi energy from the given link:

https://brainly.com/question/32064779

#SPJ11

In semiconductor lasers, how is the light produced in relation to the threshold current? O equal to the threshold current O below the threshold current above the threshold current none of these Question 12 The long loop automatic level control (ALC) only measures levels at the hub or headend location. True Select the appropriate respo NO Submit Response

Answers

The laser achieves the necessary population inversion above the threshold current.

In semiconductor lasers, the light is produced above the threshold current.

Below the threshold current, the laser is not able to achieve sufficient population inversion, and the light output is weak. The dominant process is spontaneous emission, which does not result in coherent light output.

Above the threshold current, the laser achieves the necessary population inversion, and stimulated emission becomes the dominant process. This leads to a significant increase in light output, and the laser operates in a coherent and efficient manner.

Therefore, the correct answer is: above the threshold current.

Learn more about population inversion from :

https://brainly.com/question/24128414

#SPJ11

The current i = 0.5 sin 377t passes through a 10 μF capacitor. Find the sinusoidal expression for the voltage across the capacitor.

Answers

In order to find the sinusoidal expression for the voltage across the capacitor, we can use the formula that relates the current and voltage of a capacitor. The formula for the voltage across a capacitor in an AC circuit is given byV = (1/C) ∫(i dt) whereV is the voltage across the capacitor C is the capacitance of the capacitori is the current passing through the capacitort is the time Let's substitute the given values into the formula.

We are given that the current i = 0.5 sin 377t passes through a 10 μF capacitor. Therefore,C = 10 μF = 10 × 10^-6 Fand i = 0.5 sin 377tSubstituting these values into the formula, we getV = (1/C) ∫(i dt) = (1/10 × 10^-6) ∫(0.5 sin 377t dt)Integrating with respect to t, we getV = (1/10 × 10^-6) (-cos 377t + C1)where C1 is the constant of integration.

To determine C1, we need to use an initial condition. Since the voltage across a capacitor is zero at time t = 0, we haveV = (1/10 × 10^-6) (-cos 377t + 1)Therefore, the sinusoidal expression for the voltage across the capacitor isV = -100 cos (377t) + 100 VAnswer:V = -100 cos (377t) + 100 V.

To know more about current visit:-

https://brainly.com/question/31297138

#SPJ11

Two alarm sirens are emitting a loud note: at points between the two sirens the sound is very loud, but at other points it is much fainter. what wave phenomena described ​

Answers

The wave phenomena described in this scenario is known as interference.

Interference occurs when two or more waves interact with each other, resulting in the reinforcement or cancellation of the waves at certain points in space.

In this case, the two alarm sirens are emitting sound waves that are overlapping and interfering with each other. When the waves from the sirens are in phase, meaning their peaks and troughs align, constructive interference occurs. Constructive interference leads to the amplification of the sound waves, resulting in a louder sound at points between the two sirens.

On the other hand, when the waves from the sirens are out of phase, meaning their peaks and troughs are misaligned, destructive interference occurs. Destructive interference leads to the cancellation of the sound waves, resulting in a fainter sound at points where the waves interfere destructively.

The loud and faint regions of sound between the two sirens are a result of the constructive and destructive interference of the sound waves emitted by the sirens, respectively.

For more questions on sound waves, click on:

https://brainly.com/question/16093793

#SPJ8

Tc 1.400 and Fc 1.300 and the quantity 50 unit find
Vc

Answers

The voltage drop across the capacitor (Vc) is approximately 25.93 units when Tc is 1.400, Fc is 1.300, and the quantity is 50 units.

The voltage drop across the capacitor (Vc) can be found using the formula Vc = Tc / (Tc + Fc) * Quantity, where Tc represents the total capacitance and Fc represents the fractional capacitance. In this case, Tc is given as 1.400, Fc is given as 1.300, and the quantity is 50 units. Plugging these values into the formula, we have:

Vc = 1.400 / (1.400 + 1.300) * 50

Simplifying the expression inside the parentheses:

Vc = 1.400 / 2.700 * 50

Dividing 1.400 by 2.700:

Vc = 0.5185 * 50

Calculating the final result:

Vc ≈ 25.93

Therefore, the voltage drop across the capacitor (Vc) is approximately 25.93 units.

To learn more about voltage drop across the capacitor (Vc) , Click here:

https://brainly.com/question/29052927

#SPJ11

a
bit stuck
3. a) In your own words, describe Moore's Law. Give reasons for its success in the advancement of electronics. b) Consider a Metal-Oxide-Semiconductor (silicon) (MOS) capacitor. Discuss the different

Answers

a) Moore’s Law is a prediction that was first made by Gordon Moore, the co-founder of Intel Corporation, in 1965. The law suggests that the number of transistors that can be placed on a computer chip will double every two years, while the cost of manufacturing the same will halve.

This has led to the incredible growth in the computing industry and has allowed for the development of smaller, more powerful devices at a cheaper cost. Moore’s Law has been highly successful in the advancement of electronics because it has acted as a guide to technology developers and has provided a framework for their research and development. With the understanding that the number of transistors would double every two years, developers have been able to set achievable goals that have allowed them to achieve this prediction. This has led to the development of ever-more powerful computer chips that have revolutionized the way that people live and work.

b) A Metal-Oxide-Semiconductor (MOS) capacitor is a type of capacitor that is commonly used in electronic circuits. The MOS capacitor consists of a metal electrode, a semiconductor substrate, and an oxide layer that separates the metal electrode from the substrate. The MOS capacitor is used to store charge and to control the flow of current in a circuit.

There are two types of MOS capacitors: the depletion-mode MOS capacitor and the enhancement-mode MOS capacitor. The depletion-mode MOS capacitor is normally on, which means that it conducts current when no voltage is applied to it. The enhancement-mode MOS capacitor, on the other hand, is normally off, which means that it does not conduct current until a voltage is applied to it.

The MOS capacitor is an important component in many electronic circuits because it allows for the precise control of charge and current flow. It is widely used in digital circuits, where it is used to store charge and to control the switching of current between different circuits.

To learn more about transistors visit;

https://brainly.com/question/30335329

#SPJ11

A pendulum has a length of 1.12 m. What is the period of this pendulum? Express your answer to two significant figures and include the appropriate units.

Answers

The period of the pendulum with a length of 1.12 m is approximately 2.12 seconds.

The period of a pendulum can be calculated using the formula:

T = 2π√(L/g)

where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.

Length of the pendulum (L) = 1.12 m

The acceleration due to gravity (g) is approximately 9.8 m/s².

Calculating the period of the pendulum:

T = 2π√(1.12/9.8)

T ≈ 2π√(0.1143)

T ≈ 2π(0.338)

T ≈ 2.12 seconds

Therefore, the period of the pendulum is approximately 2.12 seconds.


To know more about pendulum, refer to the link below:

https://brainly.com/question/29702798#

#SPJ11


What is the Approximate Right Ascension of a full Moon that
occurs in late April
A- 10 Hrs
B-12 Hrs
C- 8 Hrs
D-14 Hrs
Which of the following lists of events in the Moon's monthly
cycle is consecutive

Answers

Regarding the consecutive events in the Moon's monthly cycle, the correct answer would be option A- New Moon, First Quarter, Full Moon, Third Quarter.

To determine the approximate right ascension of a full Moon that occurs in late April, we need to consider the position of the Moon in the sky during that time. Right ascension is measured in hours, and it indicates the eastward position of an object in the celestial sphere.

In general, the full Moon rises in the east around sunset and sets in the west around sunrise. The right ascension of the full Moon changes throughout the year due to the Moon's orbital motion.

Given the options provided, we can estimate that the correct answer is most likely option A- 10 Hrs or option C- 8 Hrs. However, without specific information about the year and precise date in late April, it is challenging to determine the exact right ascension of the full Moon during that time.These are the four primary phases of the Moon in sequential order, as it transitions from a New Moon to a Full Moon and then back to a New Moon.

To learn more about Moon

https://brainly.com/question/29436013

#SPJ11

[Double slits with finite width] In a double-slit Fraunhofer diffraction experiment, so-called "missing orders" occur at those values of sinθ that simultaneously satisfy the condition for interference maxima and the condition for diffraction minima. Show that this leads to the condition d /a = integer, where a is the slit width and d is the distance between slits. Derive the approximate relation d sinθ = mλ as the condition for interference maxima. Use the results above to show that the number of interference maxima under the central diffraction maximum of the double slit diffraction pattern is given by 2d/(a-1) , where a is the slid width and d is the distance between slits.

Answers

Double slits with finite widthIn a double-slit Fraunhofer diffraction experiment, the "missing orders" occur when sinθ satisfies the condition for both interference maxima and diffraction minima. This leads to the condition d /a = integer.

In a double-slit Fraunhofer diffraction experiment, "missing orders" occur at those values of sinθ that simultaneously satisfy the condition for interference maxima and the condition for diffraction minima.

This leads to the condition d/a = integer, where a is the slit width and d is the distance between slits. This condition is known as Rayleigh's criterion. The condition for interference maxima is given by d sinθ = mλ, where m is an integer. Derive the approximate relation for this condition.

Using small angle approximation and applying the Taylor series, we can approximate the above expression to obtain the following relation:

d sinθ ≈ mλ or sinθ ≈ mλ / d.

The number of interference maxima under the central diffraction maximum of the double-slit diffraction pattern is given by 2d / (a-1) where a is the slit width and d is the distance between slits.

To know more about Fraunhofer diffraction please refer:

hhttps://brainly.com/question/33351208

#SPJ11

2. Determine the change in length of steel rod having a length of 800mm and a diameter of 6mm. The rod is subjected to a force Pequal to 100KN. Young's Modulus is 200GPa 3. Compute normal strain of the rod in Problem 2.

Answers

To compute the normal strain of the steel rod, we can use the formula: strain = change in length / original length , the change in length of the steel rod is approximately 1415.4 meters.

The boat is able to float because the buoyant force acting upward on the boat is equal to the weight of the boat. This is due to the principle of buoyancy. The boat displaces an amount of water equal to its own weight, and as a result, the buoyant force upward balances the weight downward.

To know more about buoyant visit :

https://brainly.com/question/32138756

#SPJ11

When calculating the equivalent resistance for a thevenin's equivalent circuit, do you count in your calculations the resistors that have no current going through? why?

Answers

When calculating the equivalent resistance for a Thevenin's equivalent circuit, we do not include the resistors that have no current flowing through them.

In the calculation of the Thevenin's equivalent resistance, only the resistors that have current flowing through them are considered. Resistors that have no current passing through them are effectively open circuits and can be excluded from the calculation. The reason for this is that when there is no current flowing through a resistor, it does not contribute to the overall resistance of the circuit. In other words, it does not affect the flow of current or the voltage across the circuit.

The Thevenin's equivalent circuit is a simplified representation of a complex circuit, which includes a single equivalent voltage source and an equivalent resistance. The purpose of this simplification is to analyze and predict the behavior of the circuit when connected to external components. By considering only the resistors that have current flowing through them, we accurately capture the effective resistance that influences the current flow and voltage distribution in the circuit.

Therefore, when calculating the equivalent resistance for a Thevenin's equivalent circuit, we do not include the resistors that have no current flowing through them. These resistors are effectively ignored since they do not impact the overall behavior of the circuit.

Know more about Resistors here:

https://brainly.com/question/30672175

#SPJ11

Starting in Albany, you travel a distance 347 miles in a direction 21.3 degrees north of west. Then, from this new position, you travel another distance 449 miles in a direction 21.1 degrees north of east. In your final position, what is your displacement from Albany? 796 miles 42.4 degrees North of East 303 miles 71.6 degrees North of West 868 miles 58.4 degrees North of West 796 miles 42.4 degrees North of West QUESTION 2 You start out by driving 109 miles south in 2 hours and 41 minutes, and then you stop and park for a while. Finally you drive another 24 miles south in 2 hours and 40 minutes. The average velocity for your entire trip was 19.89 miles per hour to the south. How much time did you spend parked? 1 hours 20 minutes 2 hours 40 minutes 0 hours 40 minutes 6 hours 41 minutes

Answers

The time spent parked was approximately 2 hours and 31 minutes.

Starting in Albany, you travel a distance of 347 miles in a direction 21.3 degrees north of west. Then, from this new position, you travel another distance of 449 miles in a direction 21.1 degrees north of east. In your final position, the displacement from Albany can be calculated by first determining the horizontal and vertical components of the two distances traveled and adding them up to find the resultant displacement.

Using trigonometry: Horizontal component of first distance = 347 cos(21.3) = 321.7Vertical component of first distance = -347 sin(21.3) = -124.2Horizontal component of second distance = 449 cos(21.1) = 420.6Vertical component of second distance = 449 sin(21.1) = 163.1The horizontal displacement is found by adding

The two horizontal components: Horizontal displacement = 321.7 + 420.6 = 742.3 miles.

The vertical displacement is found by adding the two vertical components: Vertical displacement = -124.2 + 163.1 = 38.9 miles.

The resultant displacement can be found using the Pythagorean theorem: Resultant displacement = √(742.3² + 38.9²) ≈ 742.6 miles.

The angle of the resultant displacement can be found using the tangent function:θ = tan⁻¹(38.9/742.3) ≈ 2.99° north of we therefore, the answer is 742.6 miles, 2.99 degrees north of west.2.

The average velocity for the entire trip was 19.89 miles per hour to the south. Let the time spent parked be t. Using

The formula for average velocity:v = d/t where d is the total distance traveled and t is the total time taken.

We can create an equation to relate the different variables:v = (109 + 24)/(2 hours 41 minutes + t + 2 hours 40 minutes)19.89 = (109 + 24)/(4 hours 21 minutes + t)

Multiplying both sides by the denominator:19.89(4 hours 21 minutes + t) = 133Simplifying:82.69 + 19.89t = 133Subtracting 82.69 from both sides:19.89t = 50.31Dividing by 19.89:t ≈ 2.52 hours or 2 hours and 31 minutes.

To know more about Pythagorean theorem please refer to:

https://brainly.com/question/14930619

#SPJ11

Other Questions
the japanese used the mukden incident to justify the occupation of certain territories in china, which resulted in japan dominating the entire region of_____. Find the solution of the following:a) 20t = -10 Payroll Software A Programming Company uses freelance programmers for some of their projects and they pay them at a given hourly rate. Sometimes the projects are so big such that they request the freelance programmers to exceed the weekly contracted 40 hours, and then pay the extra hours (excess of 40 hours) at an overtime rate. The total hours, including the extra hours, should not be over 60 hours and can never be zero or below. The normal hourly rate is R520.45 per hour and the overtime rate factor is 1.4072. Everyone of their ten (10) freelance programmers must submit weekly hours for the calculation of their salaries. Design a C++ Program that will accept into parallel arrays the following details: Name, Surname and hours worked. Note that the name and surname should be stored separately. We assume that the surnames are unique for each programmer. The salary calculations done per employee are: Basic Salary (rate and hours worked), Medical Allowance (Basic Salary and 8.2%), Data Allowance (Basic Salary and 5%), Gross Pay (Basic Salary, Medical Allowance and Data Allowance), PAYEE (Gross Pay and 9.34%), UIF (Gross Pay and 1%), and Net Pay (Gross Pay, PAYEE and UIF).Your program should be menu driven with the following options:[C]apture Employee Details[L]ist Employee Details[A]ll Employees Payslips[S]ingle Employee Payslip[E]xitUse a switch statement to evaluate the menu options and consider the small or capital letters for each option. The program should use functions to do the following: Capture all employee details (name, surname, hours), Display all employee details from the arrays, Display all the employees payslips, Display a single employees salary (this requires you to search for the employee using the surname only) and therefore the other function should search for the index number for the location of the employees surname in the array. Note that, the display payslip function should display a payslip for only one employee, it should only accept the name, surname and hours worked of a single employee and then make the calculations from within the function. You can use variables for the calculations within this function. Please format the payslip output as we did in the lesson. You are not limited to the suggested functions above, you can have more functions if you feel you need them, but the ones listed above are compulsory. Which of the following statements about Boer War is correct?Group of answer choicesa Hutus and Tutsis fought an ethnic confl ict in Rwandab Eritreans fought Ethiopians for independencec French and Germans fought over the modern state of Syriad British and Dutch fought for control of South Africae Dutch and Portuguese fought over control of Sierra Leone how to describe the sampling distribution of the sample mean covariance between two variables can be positive or negative.truefalse Also, how do you articulate the relevance and value of previous theoretical readings to the topic of human reproduction? Do figures like Benjamin, Horkheimer and Adorno, and Bazin contribute to your own synthetic understanding of the relationship between biological and cultural reproduction?The readings from Benjamin, Horkheimer, Adorno, and Bazin are all relevant to the topic of human reproduction because they all deal with the way that images are used to represent reality. In particular, they highlight the way that images can be used to control how we think about things. In the case of human reproduction, this means that images can be used to influence our decisions about it.Please help me elaborate with Benjamin's article, "The Work of Art in the Age of Mechanical Reproduction,"& "The Culture Industry: Enlightenment as Mass Deception," Horkheimer and Adorno& In "The Myth of Total Cinema," an article written by Bazin, please help *11. MFRS 116 refers to Property, Plant and Equipment. (a) Discuss the examples of improvements to property, plant and equipment that may increase its future economic benefit. (8) he two components of communication competence are appropriateness and directness. (True or False) HAPPY is an multinational group company with presence in several countries. It banks with a few banks Company A is a subsidiary in HAPPY, domiciled in CH and is a sub-cash pool leader within HAPPY. Company A has multiple currency accounts including EUR, USD and AED and all of its accounts are located in CH. Company A uses AED only for intercompany settlements. Company B and C are entities of HAPPY, both located in the AE. Company B is a manufacturing company - primarily cash user, it buys supplies from 3rd parties, make into finished goods and sells them to Company A at a fix margin of +5%. Company C is a distributor - primarily cash maker, it buys finished goods from Company A and sells to 3rd parties at a profit. Cash Pool arrangement: EUR and USD are daily swept - Co B and Co C accounts are 0 at the end of each business day. AED is weekly swept - each Thursday, the bank will convert AED tol from USD at fixed FX, maintaining the target balance on account. This cash pool arrangement was setypayear before Company B and Company C came in fullonerations. CAPRISIN CASE STUDY - CASH POOL Questions - 1. What is/ are the objective(s) of a cash pool for a company? 2. Comment on this cash pool set up, list its strengths and weaknesses. 5. In today's competitive environment, innovation is the mainstay for every business thatleads to development of intellectual property rights. Analyse THREE (3) roles of theintellectual property rights for business. During a prenatal visit, a nurse measures a client's fundal height at 19 cm. This measurement indicates that the fetus has reached approximately which gestational age?a) 24 weeksb) 19 weeksc) 28 weeksd) 12 weeks An output of an analogue soil moisture sensor is ranged from 0-3.3 V based on the moisture measurement range from 0-100%. The sensor is connected to a PLC using its analogue input (ADC) channel. Find an equation that shows the relationship between the moisture measurement range and the output voltage. when pulling away from a curb, the driver should first write an introduction on 5 students creating a game systemcalled hangman wich includes the primary ideas and the reasons ofdoing this plan and e.t.c the product/service component of the feasibility study typically includes which of the following aspects? A patient who is on a low-cholesterol diet verbalizes that he enjoys eating meats and doesn't intend to stop. The nurse's most helpful response would be, "You can enjoy your meat if you will concentrate on such meats as:" Question #2 (10 points) Assume that each atom is a hard sphere with the surface of each atom in contact with the surface of its nearest neighbor. Determine the percentage of the total unit cell volume 1. List the difference between open loop and closed loop control system with suitable example. 2. Draw the block diagram representation of a heating system. 3. Explain in detail the ratio control with You bought a car for $32,600. The dealer arranges a loan with an APR of 6.7% compounded monthly, and says you will only have to pay $385 per month. How long will it take to pay off the loan? (Round to the nearest tenth)