A Lewis acid is a. a proton donor b. a proton acceptor c. an electron-pair donor. d. an electron-pair acceptor. e. never viewed also as a Bronsted-Lowry acid.

Element: fluorine, F and silver, Ag Compound: calcium chloride ([tex]Ca Cl_2[/tex]) and carbon monoxide (CO), beverage mixture

Each sort of atom in an element is unique. The joining of two or more distinct atoms results in a compound. In a mixture, two or more distinct substances are combined but not chemically bonded. Both elements and substances can be found in a combination. Air and table salt make up the combination. Nitrogen is the component, and water is the element.

Metalloids, non-metals, and other categories are used to categorize elements. Ionic and covalent compounds are two different types of compounds based on the bonds they include. There is no way for elements to be reduced by chemical processes. Using chemical processes or reactions, a substance can be broken down into simpler parts. The mixture of different gases that makes up air is all there is. Nitrogen, oxygen, and other gases make up the atmosphere's air.

To learn more about mixture refer to :

https://brainly.com/question/24647756

#SPJ4

When the cart was given a quick tap in the direction that it was already moving , the change in speed was an increase in speed.

The definition of force is a push or pull applied to an item. Gravity, friction, and applied force are examples of forces. Motion can vary in direction or speed as a result of force. Acceleration describes these modifications.

The tap on the cart was an example of force being applied to the cart which then had the effect of changing the speed of the cart by increasing it from 20 cm/s to 40 cm/s.

Find out more on change in speed at https://brainly.com/question/18541554

#SPJ1

Answer:

John Dalton

Explanation:

The reaction rate increases by increasing the temperature of the reaction system , increasing the concentration of a reactant in solution and increasing the surface area of a solid reactant.

In the reaction of calcium with 1 M hydrochloric acid, The factor which  will increase the reaction rate is by increasing the temperature of the reaction system. When the temperature of the reaction increases , the molecules kinetic energy of the molecules increases more than the activation energy and it will increases the rate of reaction.

The activation energy of the reaction decreases and therefore the rate of the reaction increases. The reaction rate increases by increasing the concentration of the reactant in the solution and increasing the surface area of the solid reactant.

To learn more about rate of reaction here

https://brainly.com/question/8592296

#SPJ4

Homeostatic regulation is the process through which internal cell systems are adjusted. Adjustments must be performed regularly to maintain a cell's internal and exterior surroundings at or near the set point since they are always changing (the normal level or range).

Bidirectional calcium fluxes that take place in the colon, bones, and kidney regulate calcium homeostatic. The latter organ is crucial in controlling the level of extracellular calcium.In a cell or the body, homeostasis is defined as stability, balance, or equilibrium. It is the capacity of an organism to maintain a consistent internal environment. Homeostasis is a crucial aspect of all living organisms. As circumstances within and outside the cell vary, modifications must be made often in order to maintain a stable internal environment. Homeostasis can be viewed as a dynamic equilibrium as opposed to a stable condition.

learn more about calcium Refer:brainly.com/question/23961328

#SPJ4

Which of the following results from the reaction of 4-bromo-3-methyloctane with NaOCH3  O3 and dimethyl sulphide 1) Br NaOCH Og2)DMS o о

DMSP, a significant secondary metabolite in some marine algae, is the main source of DMS. The most common biological sulphur molecule released into the atmosphere is DMS [4]. [5] Phytoplankton emits gases throughout the oceans [6]. DMS is furthermore created naturally when dimethyl sulfoxide (DMSO) waste that is dumped into sewers undergoes bacterial conversion. This waste can lead to environmental odour issues. Diverse sulfur-containing chemicals, including sulphur dioxide, dimethyl sulfoxide (DMSO), dimethyl sulfone, methanesulfonic acid, and sulfuric acid, are produced when DMS is oxidised in the marine environment. [8] Among these substances, sulfuric acid has the capacity to produce fresh aerosols that serve as the basis for cloud condensation. Sulfate particles often develop in the troposphere as a result. Due to this

Learn more about dimethyl sulphide here:

https://brainly.com/question/12944135

#SPJ4

2AlBr3 + K2SO4 --> 6KBr + Al2(SO4)3. The first distinction we make is that the reactant side only has one sulphate group, whereas the product side has three. The potassium sulphate group can be multiplied by three to have three on either side.

What is meant by sulphate ?

Reactants

Al = 3

Br = 3

K = 2

S = 1

O = 4

Products

Al = 2

Br = 1

K = 1

S = 3

O = 12

Remember all atoms within the brackets get multiplied by the number outwith them.

Step 1

Put a 6 before KBr

AlBr3 + K2SO4 --> 6KBr + Al2(SO4)3

Step 2

Put a 2 before AlBr3

This has now balanced the number of Aluminium and Bromine atoms.

2AlBr3 + K2SO4 --> 6KBr + Al2(SO4)3

Step 3

Put a 3 before K2SO4

This balances the Potassium, Sulphur and Oxyen

2AlBr3 + K2SO4 --> 6KBr + Al2(SO4)3

Now check the reactants and products:

Reactants

Al - 2

Br - 6

K - 6

S - 3

O - 12

Products

Al - 2

Br - 6

K - 6

S - 3

O - 12

We have now successfully balanced the equation.

To learn more about sulphate refer to

https://brainly.com/question/24105877

#SPJ4

A theory is a well-substantiated explanation and hypothesis is a proposed explanation for a phenomenon.

The scientific method is a systematic process used by scientists to gather and analyze data in order to understand natural phenomena. The scientific method includes a series of steps that are followed in order to ensure that the research is conducted in a rigorous and objective manner.

The steps of the scientific method include:

Observation and Identification of a problem or question: Scientists observe the natural world and identify a problem or question that they wish to investigate.

Formulation of a hypothesis: Scientists develop a hypothesis, which is an educated guess or prediction about the relationship between variables.

Conducting experiments and collecting data: Scientists design and conduct experiments to test their hypothesis and collect data to support or refute their hypothesis.

Analysis of data: Scientists analyze the data they have collected to determine if their hypothesis is supported or refuted.

Drawing conclusions: Based on the analysis of data, scientists draw conclusions about the problem or question they were investigating.

Publishing and sharing results: Scientists publish and share their results with the scientific community for peer review and further analysis

Repeatability: Scientific results should be repeatable by other scientists, if not the results are considered weak.

A theory is a thoroughly supported explanation of a certain phenomenon in the natural world that has been developed using the scientific process and has been repeatedly verified through observation and experimentation. A hypothesis is a proposed explanation for a phenomenon. In the scientific method, a hypothesis is an educated guess or prediction about the relationship between variables, which is then tested through experimentation and observation to determine its validity. Theories often grow out of hypotheses that have been repeatedly tested and supported.

To know more about research visit:

https://brainly.com/question/28946726

#SPJ1

Answer:

he is ok

Explanation:

Answer: Yes but I also love louis and the Larry Stylinson ship theyre so cute!

Explanation:

0>0

Answer: C - Subunit (Monomer) is always a molecule

Explanation: To narrow this down, b, cannot be the answer because it is known that Polymers can extend forever with enough materials present.

It cannot be d) or a) because atoms need to have full bonds, that is, a subunit must be bonded to other units to even be considered a subunit. So it must be c) because a subunit must have full bonds. If you are talking about organic polymers, at the very least, subunits must be bonded with hydrogens, subunits cannot just be carbon atoms, same thing goes with inorganic subunits

Hope this helped and good luck with Chem!

Answer:

1.The two samples of hydrates are likely to be different hydrates. Hydrates are compounds that contain water molecules that are chemically bound to another compound, and each hydrate can have different properties, including their water content and their mass loss when heated. The fact that the two samples lose a different percentage of their original mass when heated suggests that they are different hydrates.

2.A. The hydrated form of cobalt chloride is pink or red, and the anhydrous form is blue. B. Carcinogenic means that a substance has the potential to cause cancer. The cobalt chloride paper should be handled with care because it can be toxic if ingested or inhaled, and it can cause skin and eye irritation.

A possible empirical formula of the compound is CH₅N Thus ,option B is correct.

Chemical substances that cannot be converted into other chemicals are referred to as elements. Chemical elements are distinguishable from one another by the number of protons in their atoms' nucleus, which is the fundamental particle that makes up a chemical element.

Substances that cannot be reduced to a simpler form are considered elements. A distinct atomic number serves as an identifying feature. In the periodic table, which emphasizes elements with related properties, the elements are arranged according to their atomic number.

Any material that cannot be converted into another is considered to be an element. Each element has a unique sort of atom, and there are around 100 such elements.

[tex]$$ C_xH_yN_z \rightarrow CH_5N[/tex]                

                  44g 18g

Atoms of at least one or more different elements can be found in everything in the cosmos.

To learn more about empirical formula refer to:

https://brainly.com/question/14044066

#SPJ4

The reactions that would lead to the formation of a precipitate are the reactions a, c and d.

We have to note that when a reaction occurs that we must be able to have a product from the reaction and the product of the reaction would depend on the kind of species that were combined in the reaction.

If the combination of the reactants that we have would lead to the formation of a product that is insoluble when we mix two products that are soluble then we call the insoluble product the precipitate.

Learn more about precipitate:https://brainly.com/question/29871773

#SPJ1

3 is not a valid value for the magnetic quantum number (ml) of an electron in a 5d subshell.

Quantum number is a mathematical concept used to describe the state of a quantum mechanical system, such as an electron in an atom. It is a numerical representation of the energy, angular momentum, and other properties that describe a quantum system. Quantum numbers are used to identify individual particles and to determine which energy levels of the system are available to the particle. They are essential for understanding the structure and behavior of atoms and molecules.

The magnetic quantum number (ml) describes the orbital angular momentum of an electron, and it has a maximum value of ml = l = 2 for the 5d subshell. Therefore, the only valid values for ml in a 5d subshell are -2, -1, 0, 1, and 2, so C. 3 is not a valid value.

To know more about quantum number click-
https://brainly.com/question/5927165
#SPJ4

The correct answer is A) The following statements about heat and work are correct. The mechanism absorbs heat with a positive indication. Heat discharged into the environment has a negative indication.

Positive results have been obtained through system work. The system's work has a negative indication. Sign Heat and Work Conventions The signs 'w' and 'q' represent changes in internal energy. When 'w' or 'q' is positive, it indicates that energy has been delivered to the system in the form of work or heat. The heat produced by the system equals q negative. The system's work equals w negative.The following statements about heat and work are correct. The mechanism absorbs heat with a positive indication. Heat discharged into the environment has a negative indication. Positive results have been obtained through system work. The system's work has a negative indication.

learn more about  Heat here:

https://brainly.com/question/1429452

#SPJ4

A faraday is equal to one mole of electric charge. Because each aluminum ion gains 3 electrons, 0.1 faraday of charge will reduce 0.1/3 moles of aluminum, or 0.033 moles of aluminum.

What is meant by aluminum ?

To learn more about aluminum refer to

https://brainly.com/question/246454

#SPJ4

The regular payment necessary to repay the $60,000 loan over 14 years while paying interest at a rate of 4% per year compounded 6 times a year is $803.03.

Interest is the cost of borrowing money or the return earned from investing money. Interest is computed as a percentage of the principal, which is the amount of money borrowed or invested. When someone borrows money from a lender, the borrower must pay back the principal plus interest. When someone invests money, the investor earns interest on the money they have invested. Monthly, quarterly, yearly, or at maturity, interest payments are all possible. Interest rates can vary widely depending on the type of loan or investment, the creditworthiness of the borrower or investor, and prevailing economic conditions.

The periodic payment R required to amortize a loan of $60,000 over 14 years with interest charged at a rate of 4% per year compounded 6 times a year can be calculated using the formula below:
R = P × r/m[1 − (1 + r/m)^−mt]
R = 60,000 × 0.04/6[1 − (1 + 0.04/6)^−6*14]
R = 803.03

To learn more about Interest
https://brainly.com/question/28504357
#SPJ4

The correct option which can help in defining this question is- M1V1 = M2V2 50 X 0.05 = 0.1 X V2 V2 = 25 ml H

Procedure for precipitation:

Procedure for Spectrophotometry:

To know more about molar concentration here

https://brainly.com/question/26255204

#SPJ4

The rate of reaction, when half of the prepared solution is used to perform the reaction, gets reduced to half of it's initial value.

The SN2 reaction is a type of nucleophilic substitution reaction where a bond between the atoms of a reactant is broken and another one is formed synchronously. The two reacting species are involved together in the rate determining step of the reaction. The term 'SN2' in SN2 reaction stands for – Substitution Nucleophilic Bimolecular.

The reaction of organic compound 1-bromopropane with an inorganic compound sodium hydroxide gives propan-1-ol and NaBr.

CH3CH2CH2Br + OH- → CH3CH2CH2OH + Br-

Now according to the Le Chatelier's principle of Equillibrium;

when the concentration of the reactants is reduced the rate of the reaction is also reduced in accordance with the order of reaction.

The SN2 reactions are first order reactions and the rate of reaction is directly proportional to the order of reaction.

Now as the solution prepared is added in the reaction, the concentration of reactants gets reduced and so thus the rate of reaction. The order of reaction is 1. Hence the rate of reaction is reduce to half itself.

Learn more about rate of reaction here:

https://brainly.com/question/8592296

#SPJ4

A volume from a density and mass is 5.2.

To write extremely large or extremely small numbers, use scientific notation. When a number in the range of 1 to 10 is multiplied by a power of 10, the result is represented in scientific notation. The scientific notation for 650,000,000, for instance, is 6.5 108.

The most significant number in the number is where it rounds to. If you want to round up to one significant figure, look at the first non-zero digit. If the number is rounded to two significant figures, look at the digit that comes after the first non-zero digit.        

To learn more about volume refer to:

https://brainly.com/question/463363

#SPJ4

a) The time that is taken is 48.8 s

b) The mass that is left is 14.6 g

We have to know that the rate constant would have to do with the number that shows how much of the reactants have been converted into products within the given time.

Then we have;

ln[A] = ln[A]o - kt

[A] = concentration at time t

[A]o = Initial concentration

t = time taken

k = rate constant

Then;

ln(0.181) = ln(1) - 0.0350 * t

t = -ln(0.181/1) /0.0350  

= 48.8 s

b)

[A] = 16.76 - ( 0.0200 * 106.2)

= 14.6 g

Learn more about rate constant:https://brainly.com/question/20305871

#SPJ1

10g of solid lead has the highest heat capacity among the following.

Heat capacity is a measure of the amount of heat required to raise the temperature of a substance by a certain amount. The heat capacity of a substance is directly proportional to the amount of the substance, meaning that the more substance you have, the more heat it can absorb before its temperature increases. This is why 10g of solid lead has the highest heat capacity, as it can absorb more heat than 2g or 1g before its temperature increases. This means that 10g of lead will take more energy to raise its temperature by 1 degree, compared to 2g or 1g of lead. Furthermore, heat capacity is also affected by the specific heat of the substance, which is a measure of how much heat energy is required to raise the temperature of a given amount of a substance by one degree.

To know more about heat

https://brainly.com/question/13860901

#SPJ4

Minimum standard for chlorine based sanitizing solution for 3 compartment sink is 50-100 ppm, consult local health dept for specific requirements.

According to most health codes, the minimum standard for parts per million (ppm) concentration of a chlorine-based chemical when preparing a sanitizing solution for the three compartment sink is 50-100 ppm. This means that the solution should contain at least 50-100 milligrams of chlorine for every liter of water.

This concentration is sufficient to effectively kill harmful bacteria and other microorganisms that may be present on surfaces and equipment. However, it's important to note that this can vary depending on the specific health code in your area.

Therefore, it is always recommended to consult your local health department for the specific requirements in your area, they may have different standards or more stringent guidelines. It's also worth noting that the temperature and contact time of the solution also affect the sanitizing efficacy.

Learn more per million concentration:

https://brainly.com/question/25104378

#SPJ4

The equilibrium of this reaction will lie to the right, since the reaction is exothermic.

What is equilibrium?

Equilibrium is a state in which all forces, or influences, that affect a system are balanced and cancel each other out. It is a concept used in several disciplines, including physics, chemistry, economics, and biology, and is usually represented by a point on a graph or chart.Equilibrium is an important concept in many disciplines and can also be used to describe social or political systems.

NaH + HX → NaX + H2

The equilibrium of this reaction will lie to the right, since the reaction is exothermic. This means that more products will be produced than reactants, and the reaction will favor the formation of NaX and H2.

To learn more about equilibrium

https://brainly.com/question/18849238

#SPJ4

The functional groups appear in a molecule of daumone :

The  functional group is an atom or the group of atoms and the bond that is responsible for  chemical reactivity of the members of the homologous series. The same functional group will behave similar. The daumone is the monocarboxylic acid.

The functional groups appear in the molecule of the daumone are the three functional groups. The first is an ether , second one is carboxylic acid and the third one is alcohol. The is isolated and found in the extend life in the worms.  The daumone is the compound that is responsible for the hibernation.

To learn more about functional group here

https://brainly.com/question/28538808

#SPJ4

Answer:

[tex]\huge\boxed{\sf n=0.019 \ mol}[/tex]

Explanation:

Mass in grams = m = 1.20 g

Molar mass of SO₂ = M = 32 + (16 × 2)

= 32 + 32

No. of moles = n = ?

[tex]\displaystyle n=\frac{m}{M}[/tex]

[tex]\displaystyle n = \frac{1.20}{64} \\\\n=0.019 \ mol\\\\\rule[225]{225}{2}[/tex]

Answer:

Group 4A of the periodic table includes the metalloids silicon (Si) and germanium (Ge), boron, arsenic, antimony, tellurium and polonium, etc

Explanation:

Here is the balanced equation for the given redox reaction:

MnO4- (aq) + 8H+ (aq) + 5e- → Mn+2 (aq) + 4H2O (l) (oxidation)

SO2 (g) + 2H+ (aq) + 2e- → HSO4- (aq) (reduction)

The half-reaction method is a method used to balance redox reactions. The method involves breaking the redox reaction into two half-reactions, one representing the oxidation and the other representing the reduction. The half-reactions are then balanced separately, and then recombined to obtain the balanced equation.

MnO4- (aq) + 8H+ (aq) + 5e- → Mn+2 (aq) + 4H2O (l)

In this half-reaction, the MnO4- is oxidized to Mn+2, which is the oxidation process. The electrons (e-) are lost by the MnO4- molecule and gained by the Mn+2 ion. The 8H+ and 4H2O are added to balance the oxygen and hydrogen atoms. It is important to note that this reaction is taking place in acidic medium and that's the reason why we used H+ in the half-reactions.

learn more about Half Reaction method here:

brainly.com/question/10668307

#SPJ4

If molten lead(II) bromide is electrolyzed using graphite electrodes

The correct option is C.

The process of electrolysis, used in both chemistry and manufacturing, uses direct electric current to speed up a chemical reaction that wouldn't normally happen by itself. When elements are separated from naturally occurring sources, like ores, using an electrolytic cell, electrolysis plays a significant role commercially.

In the electrolysis of molten lead(II) bromide using graphite electrodes;

Learn more about electrolysis at: https://brainly.com/question/12994141

#SPJ1