A long thin solid rod lies along the positive x-axis. One end is at x = 1.80 m and the other at x = 3.40 m. The linear mass density is λ = a[tex]x^{3}[/tex] + bx, where λ is measured in kg/m, and the constants have the following values: a = 1.70 kg/[tex]m^{4}[/tex] and b = 2.20 kg/[tex]m^{2}[/tex].
1. Determine the total mass of the rod.
2. Calculate the x-coordinate of the center of the mass for this rod.

Answer:

i dond no can you put another question

The angle at which it should be banked for a traffic speed of 100 km/h is

14.57°.

To find the angle of banking following formula can be used,

[tex]tan \alpha = v^{2} /rg[/tex]

Given v = 100km/h or

          = 100  x 1000 / 3600

          = 27.7 m/s

Hence,

[tex]tan \alpha = (27.7)^{2} / 300 * 9.81[/tex]

[tex]tan\alpha = 0.26[/tex]

[tex]\alpha = tan^{-1} 0.26[/tex]

[tex]\alpha = 14.57[/tex]°

Hence, the angle of banking of the road will be 14.57°

To learn more about Banking of the road refer to:

https://brainly.com/question/20385799

#SPJ10

The average velocity is 4i m/sec

The average acceleration is 4i

Average velocity is defined as the change in position or displacement (∆x) divided by the time intervals (∆t) in which the displacement occurs. T

According to the question,

x=at²i + btj ( t is in second and x is in meter).

Average velocity =  [tex]\frac{dx}{dt}[/tex]

[tex]\frac{dx}{dt} = 2at i + b j\\\\\frac{dx}{dt} = 2 * 2 * t i +1 j\\\\\frac{dx}{dt} = 4t i +j[/tex]

[tex]\frac{dx}{dt}[/tex] in the time interval of 2 to 3 sec is

at 2 sec,

[tex]\frac{dx}{dt} = 4 * 2 i +j = 8i +j[/tex]

at 3 sec ,

[tex]\frac{dx}{dt}[/tex] = 4 * 3 i + j = 12i+j

Therefore the average velocity is

[tex]\frac{(12i +j - 8i -j)}{(3-2)} = 4i[/tex]

The velocity at any given time is   [tex]\frac{dx}{dt} = 4t i +j[/tex]

The acceleration at any given time is [tex]\frac{dx^2}{dt^2}[/tex]

[tex]\frac{dx^2}{dt^2} = 4 i[/tex]

The average acceleration in the time interval  t₁=2sec and t₂=3sec

Average Acceleration =  4i

Learn more about  average velocity here:

https://brainly.in/question/11504533

#SPJ1

Answer:

Since 1 cal = 4.19 J     the heat Q received by the metal is

Q = 13,500 J * 1 C / 4.19 J = 3,222 calories

S = ΔQ / (ΔT * ΔM)  = 3222 cal / (45 deg C / 750 gm)

S = .095 cal / gm deg C

Note that specific heat capacity for Cu is .093 cal / gm deg C

Answer:

if you pick it up the heat will flow to the hand until the Temperature of both evens out

The centripetal force is obtained by its formulas is,[tex]\rm F_C= \frac{mv^2}{r}[/tex]

The acceleration needed to move a body in a curved way is understood as centripetal acceleration.

The direction of centripetal acceleration is always in the path of the center of the course. The total acceleration is the result of tangential and centripetal acceleration.

The formula for the centripetal force is ;

[tex]\rm F_C= \frac{mv^2}{r}[/tex]

Where,

r is the radius

v is the linear speed

m is the mass of an object

Hence, the centripetal force obtained by its formulas as,[tex]\rm F_C= \frac{mv^2}{r}[/tex]

To learn more about centripetal acceleration, refer to the link;

https://brainly.com/question/17689540

#SPJ1

Explanation:

The light is bent away from the normal

HIV can be contracted from contact with bloodborne pathogens.

Other bloodborne diseases are HBV, malaria, syphilis and brucellosis

Bloodborne pathogens can be defined as those microorganisms or pathogenic organisms that cause disease and are present in human blood.

Blood borne pathogens can also be contacted through the following means

In conclusion; HIV can be contracted from contact with bloodborne pathogens.

Learn more about bloodborne pathogens:

https://brainly.com/question/13158004

#SPJ1

The average velocity of the particle from rest to 9 seconds would be 2 meters/sec.

This average velocity can be calculated with the following equation:

v = dx / dt

where:

dx = displacement = 18 meters

dt = interval of time = 9 seconds

Substitute;

v = dx / dt

v = 18 / 9

v = 2 meters/sec

Hence, the average velocity of the particle from rest to 9 seconds would be 2 meters/sec.

Learn more about velocity here;

https://brainly.com/question/14434909

#SPJ1

The crest is the highest point of a pebble-induced ripple in a body of water. Option a is correct.

The distance between two successive troughs or crests is known as the wavelength. The highest point of the wave is the crest, while the trough is the lowest.

The high point of the ripple seen in a pond after throwing in a pebble is the crest.

Hence option a is correct.

To learn more about the wavelength refer to the link;

https://brainly.com/question/7143261

#SPJ1

The height of stairs a 60 kg student would have to run in order to burn off 1 Calorie of food energy will be 7.1 meters.

The potential energy is due to the virtue of the position and the height. The unit for the potential energy is the joule.

Given data;

Mass of student,m = 60 kg

Energy,E = 4190 J

Height of stairs,h=?

The potential energy is mainly dependent upon the height of the object. The potential energy is found as;

Potential energy = mgh

E=mgh

h=E/mg

h= 4190 J / (60 kg× 9.81  m/s²)

h = 7.1 metre

Hence the height of the stairs will be 7.1 meters.

To learn more about the potential energy, refer to the link;

https://brainly.com/question/24284560

#SPJ1

You are watching a television show about Navy pilots. The narrator says that when a Navy jet takes off, the average force on the jet is due to the catapult is mathematically given as

What is the average force on the jet is due to the catapult?

Generally, the equation for acceleration is mathematically given as

[tex]a=\frac{vf^2-vi^2}{2s}\\\\\Therefore\\\\a=\frac{69.29^2-0^2}{2(90}\\\\a=26.673m/s^2[/tex]

In conclusion, The force

F=m*a

F=15100*26.673

F=40272.3N

F 402 KN

Read more about force

https://brainly.com/question/13191643

#SPJ1

Answer:

Tolerate

Explanation:

Answer:

Explanation:

Comment

You could calculate it out by assuming the same starting temperature for each substance. (You have to assume that the substances do start at the same temperature anyway).

That's like shooting 12 with 2 dice. It can be done, but aiming for a more common number is a better idea.

Same with this question.

You should just develop a rule.  The rule will look like this

The greater the heat capacity the (higher or lower) the change in temperature.

The greater the heat capacity the lower the change in temperature

That's not your question. You want to know which substance will have the greatest temperature change given their heat capacities.

Answer

lead. It has the smallest heat capacity and therefore it's temperature change will be the greatest.

Find the relationship

[tex]\\ \rm\Rrightarrow Q=mc\Delta T[/tex]

[tex]\\ \rm\Rrightarrow 100=10c\Delta T[/tex]

[tex]\\ \rm\Rrightarrow 10=c\Delta T[/tex]

[tex]\\ \rm\Rrightarrow \dfrac{10}{c}=\Delta T[/tex]

[tex]\\ \rm\Rrightarrow \Delta T\propto \dfrac{1}{c}[/tex]

So lower the c higher ∆T

Lead has the largest change in T as it has least capacity

Explanation:

this is the answer 276 volts

The initial velocity of the arrow and the height of the building will be 29.05 m/s² and 781 m respectively.

The change of distance with respect to time is defined as speed. Speed is a scalar quantity. It is a time-based component. Its unit is m/sec.

The given data in the problem is;

u is the initial velocity of fall = ?  m/sec

h is the distance of fall = 200 m

g is the acceleration of free fall = 9.81 m/sec²

H is the height of the building

t is the time period = 10 second

According to Newton's second equation of motion,

[tex]\rm h= ut+\frac{1}{2} gt^2 \\\\\ h-\frac{1}{2} gt^2 =ut \\\\ 200 - 0.5 \times(9.81) \times 10^2 = 10 u \\\\ u = - 29.05 \ m/sec[/tex]

- ve shows the direction is downward.The magnitude of the initial velocity is found as;

u = 29.05 m/sec

The height of the building

[tex]\rm H= ut+\frac{1}{2} gt^2 \\\\\ H = 29.05 \times 10 + 0.5 \times 9.81 \times 10^2 \\\\ H = 781 \ m[/tex]

Hence the initial velocity of the arrow and the height of the building will be 29.05 m/s² and 781 m respectively.

To learn more about the velocity, refer to the link: https://brainly.com/question/862972

SPJ1

Answer:

Explanation:

The amplitude is extraneous information for this question.

Period (T) is simply a measure of time (how long it takes to complete a full cycle).

The frequency (f), is the reciprocal (how many cycles it can complete per unit of time).

The frequency reported is 12Hz.  Hz is a unit meaning "cycles per second"

Thus 12cycles = 1second.

To find the number of seconds per cycle, simply create the other unit fraction and simplify:

[tex]T=\frac{1second}{12cycles}\\T=0.8\bar{3}\frac{seconds}{cycle}\\[/tex]

[tex]T=0.83seconds[/tex]

Hello!

We can use the following equation for magnetic force on a charged particle:
[tex]F_B = qv \times B[/tex]

[tex]F_B[/tex] = Magnetic force (N)

q = Charge of particle (1.6 × 10⁻¹⁹ C)
v = velocity of particle (5.2 × 10⁷ m/s)

B = Magnetic field strength (1.4 T)

This is a cross-product, so the equation can be rewritten to F = qvBsinφ where φ is the angle between the magnetic field and particle velocity vectors.  

Since the proton's velocity vector and the magnetic field vector are perpendicular, sin(90) = 1. We can reduce the equation to:

[tex]F_B = qvB[/tex]

Plug in the known values.

[tex]F_B = (1.6*10^{-19})(5.2*10^7)(1.4) = \boxed{1.1648 *10^{-11} N}[/tex]

The mass in one period travels 'a distance less than 25 cm which will be 0.

The amplitude of a pendulum is the maximum displacement of the pendulum.

If the maximum displacement of the pendulum is 25 cm, the mass in one period travels a distance less that 25 cm.

Thus, then the mass in one period travels 'a distance less than 25 cm which will be 0.

Learn more about amplitude here: https://brainly.com/question/413740

#SPJ1

Answer:

  19.6 m/s

Explanation:

The velocity is the product of acceleration and time.

__

Here, the acceleration is due to gravity.

  v = at

  v = (9.8 m/s²)(2 s) = 19.6 m/s

The stone hits the ground with a speed of 19.6 m/s.

A stone is dropped from the top of a tower which touches the ground after 2 seconds.

Hence, The stone hit the ground with the velocity speed of 19m/s².

- When you're solving velocity, you're determining how fast an object moves from its original position, with respect to a frame of reference, and a function of time.

- That means an object's velocity will be equal to the object's speed and direction of motion.

"Problem has been solve"

(ノ^_^)ノ

It is important to remember "association", instead of "causation" when discussing correlations because associations can be used to make predictions.

The associations among variables have a fundamental value in science because they can determine how such variables behave in hypothetical situations.

Moreover, correlation only indicates a type of association between variables and therefore it is less informative.

In conclusion, it is important to remember "association", instead of "causation" when discussing correlations because associations can be used to make predictions.

Learn more about associations in science here:

https://brainly.com/question/26998752

#SPJ1

Answer:

Approximately [tex]53^{\circ}[/tex], assuming that the upper and lower surfaces of the glass on this boat are parallel.

Explanation:

Assume that the upper and lower surfaces of the glass at the bottom of this ship are parallel. Refer to the diagram attached. The two normals would also be parallel to each other.

The following angles would be alternate interior angles between the two normals:

Since the two normals are parallel to each other, these two angles would have the same value. Let [tex]\theta_{\text{glass}}[/tex] denote the value of both of these angles.

Let [tex]\theta_{\text{src}}[/tex] denotes the angle at which a beam of light leaves the original medium (angle of incidence.) Let [tex]\theta_{\text{dst}}[/tex] denote the angle at which this beam of light enters the new medium.

Let [tex]n_\text{src}[/tex] and [tex]n_\text{dst}[/tex] denote the refractive indices of the original and the new medium, respectively. By Snell's Law:

[tex]\begin{aligned}\frac{\sin(\theta_{\text{dst}})}{\sin(\theta_{\text{src}})} = \frac{n_{\text{src}}}{n_{\text{dst}}}\end{aligned}[/tex].

Let [tex]\theta_{\text{water}}[/tex] denote the angle at which the beam of light in this question leaves the water. Let [tex]\theta_{\text{air}}[/tex] denote the angle at which this beam of light enters the air. It is given that [tex]\theta_{\text{water}} = 37^{\circ}[/tex], while [tex]\theta_{\text{air}}[/tex] is the value that needs to be found.

Let [tex]n_{\text{air}}[/tex], [tex]n_{\text{water}}[/tex], and [tex]n_{\text{glass}}[/tex] denote the refractive index of air, water, and glass, respectively. By Snell's Law:

[tex]\begin{aligned}\frac{\sin(\theta_{\text{glass}})}{\sin(\theta_{\text{water}})} = \frac{n_{\text{water}}}{n_{\text{glass}}}\end{aligned}[/tex].

[tex]\begin{aligned}\frac{\sin(\theta_{\text{air}})}{\sin(\theta_{\text{glass}})} = \frac{n_{\text{glass}}}{n_{\text{air}}}\end{aligned}[/tex].

Thus:

[tex]\begin{aligned} & \frac{\sin(\theta_{\text{air}})}{\sin(\theta_{\text{water}})} \\ =\; & \frac{\sin(\theta_{\text{glass}})}{\sin(\theta_{\text{water}})}\times \frac{\sin(\theta_{\text{air}})}{\sin(\theta_{\text{glass}})} \\ =\; & \frac{n_{\text{water}}}{n_{\text{glass}}}\times \frac{n_{\text{glass}}}{n_{\text{air}}} \\ =\; & \frac{n_{\text{water}}}{n_{\text{air}}}\end{aligned}[/tex].

Since [tex]\theta_{\text{water}} = 37^{\circ}[/tex]:

[tex]\begin{aligned} & \sin(\theta_{\text{air}})\\ =\; & \sin(\theta_{\text{water}}) \times \frac{\sin(\theta_{\text{air}})}{\sin(\theta_{\text{water}})} \\ =\; & \sin(\theta_{\text{water}})\times \frac{n_{\text{water}}}{n_{\text{air}}} \\ =\; & \sin(37^{\circ}) \times \frac{1.33}{1.0} \\ \approx \; & 0.800 \end{aligned}[/tex].

Therefore:

[tex]\begin{aligned}\theta_{\text{air}} &= \arcsin(\sin(\theta_{\text{air}})) \\ & \approx \arcsin(0.800) \\ &\approx 53^{\circ} \end{aligned}[/tex].

In other words, this beam of light would leave the glass at approximately [tex]53^{\cic}[/tex] from the normal.

Answer:

Joes displacement is 54m

Answer:

Explanation:

Wow, I said 'beets'..... I must be weird.

Answer:

4.2 A

Explanation:

V=IR

V= voltage

I= Current

R= resistance

so you will find the resistance in the circuit so

R= V/I

R=2V/0.70A

R=2.857 ohms ( TO THE NEAREST THOUSANDTH)

then you will find the current of the 12V battery using the resistance in the circuit

I=V/R

I=12/2.857

I=4.2A (TO THE NEAREST TENTH)

The electric flux through the cylinder due to this infinte line is 1 355 x 10' N m²/C, The electric flux through the cylinder is independent of the radius of the cylinder. So, the electric flux through the cylinder is the same as in part (a) which is equal to is 1.355 10 Nm C and The electric flux through the cylinder due to this infinte line is 2.711 x 10' N m² C

Given an imaginary cylinder with a radius of r = 0.185 m and a length of l = 0.440 m that has an infinite line of positive charge running along its axis. The charge per unit length on the line is λ = 4.50 μC/m.

Solve for the electric flux through the cylinder due to this infinte line:

As below equation mentions, the electric flux for a uniform electric filed is given by:

Фₓ = EA cosΦ

Φₓ = λLcosΦ)/ε

Φₓ = (3 x 10^(-6) x 0.4 x cos0)/(8.854 x 10^(-12))

Φₓ = 1.355 x 10^(5) Nm²/C

Hence the electric flux through the cylinder due to this infinte line is 1 355 x 10' N m²/C, The electric flux through the cylinder is independent of the radius of the cylinder. So, the electric flux through the cylinder is the same as in part (a) which is equal to is 1.355 10 Nm C and The electric flux through the cylinder due to this infinte line is 2.711 x 10' N m² C

Learn more about electric flux here:

https://brainly.com/question/26289097

#SPJ10

The appliance is run with a 12 V car battery and the value of the electric current will be 0.3A.

The pace at which electrons travel through a conductor is known as electric current. The ampere is the SI unit for electric current.

From ohm's law;

Case 1;

V=IR

120 V = 3 A × R

R = 40 ohm

For the same appliances, the value of the resistance is the same;

Case 2;

V=IR

12 V =  I × 40 ohm

I = 0.3 A

Hence the value of the current for case 2 will be 0.3 A.

To learn more about the electric current refer;

https://brainly.com/question/7643273

#SPJ1

The field exerts 6.5 x 10⁸ Newton of force on EACH COULOMB of charge in the field.

We're putting 1.6 x 10⁻¹⁹ Coulomb of charge into the field.

The force on it will be

      (1.6 x 10⁻¹⁹ Coulomb) x  (6.5 x 10⁻⁸ Newton/Coulomb).

That's 1.04 x 10⁻¹⁰ Newton.

Answer:

it will float

Explanation:

according to Archimedes' principle, if the buoyant force is equal to the weight of the mass of the object, the object will float