if the values of mass (m) and radius (R) are provided, the moment of inertia of the body about an axis through the center of disk A can be calculated as (3/2) * m * R^2, and the kinetic energy of the rotating body would be 162 * m * R^2 Joules.
To calculate the moment of inertia of the body about an axis through the center of disk A, we need to consider the moment of inertia contributions from each individual disk and add them up.
Let's denote the moment of inertia of each disk as I_A, I_B, and I_C, respectively. The moment of inertia of a disk rotating about its center can be calculated using the formula:
I = (1/2) * m * r^2
Where m is the mass of the disk and r is its radius.
Since the struts have negligible weight, we can assume that each disk has the same mass.
Let's assume the mass of each disk is m and the radius of each disk is R.
The moment of inertia of disk A (I_A) is given by:
I_A = (1/2) * m * R^2
The moment of inertia of disk B (I_B) and disk C (I_C) will be the same since they have the same mass and radius:
I_B = I_C = (1/2) * m * R^2
The total moment of inertia of the body about the axis through the center of disk A (I_total) is the sum of the individual moment of inertias:
I_total = I_A + I_B + I_C
= (1/2) * m * R^2 + (1/2) * m * R^2 + (1/2) * m * R^2
= (3/2) * m * R^2
To calculate the kinetic energy of the rotating body, we can use the formula:
Kinetic Energy = (1/2) * I_total * ω^2
Substituting the given values:
Kinetic Energy = (1/2) * ((3/2) * m * R^2) * (6.0 rad/s)^2
Simplifying further, if the values of m and R are given, we can calculate the moment of inertia and kinetic energy.
Assuming that the values of mass (m) and radius (R) are given, we can calculate the moment of inertia (I_total) and kinetic energy.
For the given values of ω = 6.0 rad/s and the previously calculated I_total:
I_total = (3/2) * m * R^2
Kinetic Energy = (1/2) * I_total * ω^2
= (1/2) * [(3/2) * m * R^2] * (6.0 rad/s)^2
= (9/2) * m * R^2 * (36.0 rad^2/s^2)
= 162 * m * R^2 Joules
Therefore, if the values of mass (m) and radius (R) are provided, the moment of inertia of the body about an axis through the center of disk A can be calculated as (3/2) * m * R^2, and the kinetic energy of the rotating body would be 162 * m * R^2 Joules.
To learn more about the moment of inertia click:
brainly.com/question/29415485
#SPJ1
Weston's friends and family cheered him on during his road bike race, which
kept Weston going even when he felt he couldn't go any farther. This is an
example of which of the following?
A. Physiological states
B. Verbal persuasion
C. Performance accomplishments
OD. Vicarious experience
SUBMIT
The given example is a kind of verbal persuasion. So, option B.
Verbal persuasion is defined as inspiring and motivating others through positive words. When athletes are undertaking competitions, it is done by the people those who are not now participating and are being supportive, motivating, and energizing one another.
The verbal persuasion factor highlights the beneficial effects that words may have on someone's sense of self-efficacy.
In order to overcome self-doubt and concentrate on achieving the goal at hand their best effort, people need verbal persuasion from others.
To learn more about verbal persuasion, click:
https://brainly.com/question/31642603
#SPJ1
Two waves traveling in the same medium and
having the same wavelength interfere to create a
standing wave. What is the distance between two
consecutive nodes on this standing wave?
The distance between two consecutive nodes on this standing wave if the two waves traveling in the same medium is half of the wavelength.
The standing wave is defined as a stationary wave in which a combination of two waves moves in opposite directions with the same amplitude and same frequency. This phenomenon results in Interference. When two waves are superimposed the output waves are added up to each other and cancel out each other.
From the given, the two waves traveling in the same medium and having the same wavelength (λ) interfere to create the standing wave. The distance between two consecutive nodes is half of the wavelength and hence the distance is λ/2.
To learn more about Standing waves:
https://brainly.com/question/31823225
#SPJ1
What is the average acceleration of an
automobile moving from 0 to 60 m/s in 3.0
seconds?
a. 90 m/s²
b. -20 m/s²
c. -90 m/s²
d. 20 m/s²
Answer:
D
Explanation:
Using the formula for average acceleration, which is:
average acceleration = (final velocity - initial velocity) / time
Where the initial velocity is 0 m/s and the final velocity is 60 m/s, and the time is 3 seconds, we get:
average acceleration = (60 m/s - 0 m/s) / 3 s = 20 m/s²
Therefore, the answer is (d) 20 m/s².
The greater the power of an electrical appliance, the more quickly it takes energy from the mains.
True or false give reason for falsee
After analysing the given data we conclude that the given statement is considered true.
The greater the power rating in the electrical appliance, the larger energy is applied every second. And hence longer the usage time, the more electrical energy is consumed.
A process through which measures the maximum amount of power that can be applied with a specific tool or device is known as power rating . It is placed in a series to keep the user safe and apply prevention of the tool or device from becoming damaged.
The power rating generally results from a combination of the maximum power requirements of the electrical load on the consumption side during discharging and the most frequently appearing excess power on the input power during charging.
To learn more about power rating
https://brainly.com/question/21651731
#SPJ1
A child throws a small rubber ball at a heavier, larger basketball that is sitting still. The small ball bounces backward off the basketball. Describe the motion of the basketball after the small ball bounces back. Does it move at all? Does it move faster or slower than the small ball? what direction does it move? How does newtons third law affect your answer?
When a small rubber ball bounces off a larger, heavier basketball, the basketball will move slightly in the opposite direction, but it will move much slower than the rubber ball due to its larger mass.
According to Newton's third law of motion, every action has an equal and opposite reaction. In the case of the small rubber ball bouncing off the basketball, the rubber ball exerts a force on the basketball, and the basketball exerts an equal and opposite force back on the rubber ball.
As a result, the small rubber ball bounces back in the opposite direction, while the basketball experiences a force in the opposite direction.
The motion of the basketball after the small ball bounces back depends on the mass and velocity of the two objects. Since the basketball is much larger and heavier than the rubber ball, it will not move much, if at all.
In fact, if the rubber ball is light enough and bounces back with enough force, it may cause the basketball to move slightly in the opposite direction. However, the basketball will move much slower than the rubber ball due to its larger mass and slower acceleration.
In terms of direction, the basketball will move in the opposite direction of the rubber ball, as dictated by the conservation of momentum. Since the total momentum of the system before and after the collision must be conserved, the basketball will move in the opposite direction of the rubber ball to balance out the momentum.
For more such questions on direction visit:
https://brainly.com/question/27854247
#SPJ11
Could you please help me out and explain?
A liner object is placed parallel to a mirror. The object rotates 40° clockwise, in a perpendicular line on the mirror. How does the objects image change?
A linear object is placed parallel to a mirror. The object rotates 40° clockwise, in a perpendicular line on the mirror. The object's image would appear rotated counterclockwise by 40° compared to its initial position.
When a linear object is placed parallel to a mirror and rotates 40° clockwise in a perpendicular line on the mirror, the image of the object undergoes a change. The image formed in a mirror follows the law of reflection, which states that the angle of incidence is equal to the angle of reflection.
Initially, when the object is parallel to the mirror, its image is also parallel and located at the same distance behind the mirror as the object is in front of it. However, as the object rotates clockwise, the incident angle between the object and the mirror changes, resulting in a different reflected angle.
As the object rotates, the image rotates by the same angle but in the opposite direction. In this case, the image would rotate 40° counterclockwise. Therefore, the image of the linear object would appear rotated counterclockwise by 40° compared to its initial position.
It is important to note that the size of the image and the distance between the object and its image remain unchanged, as long as the object maintains the same distance from the mirror throughout the rotation. Only the orientation or rotation of the image changes.
For more such information on: image
https://brainly.com/question/23864253
#SPJ11
A car manufacturer wants to change its car's design to increase the car's acceleration. Which changes should the
engineers consider making to the design?
O increase the force that the engine provides
O decrease the force that the engine provides
O increase the mass of the car
O decrease the mass of the car
O increase the top velocity the car can travel
decrease the top velocity the car can travel
To increase a car's acceleration, the engineers should consider decreasing the car's mass and/or increasing the force that the engine provides. Therefore, options A and D are the correct answers.
Acceleration is directly proportional to the net force acting on an object and inversely proportional to its mass. This means that a smaller mass or a larger force will result in a greater acceleration. Therefore, reducing the mass of the car will require less force to achieve the same acceleration, or the same force will result in a greater acceleration.
To decrease the mass of the car, the engineers could consider using lighter materials for the car's body and frame or removing unnecessary components. On the other hand, to increase the force that the engine provides, the engineers could consider upgrading the engine or increasing the fuel intake.
Option B, which suggests decreasing the force that the engine provides, would have the opposite effect and result in a slower acceleration. Option C, which suggests increasing the mass of the car, would also have the opposite effect and require more force to achieve the same acceleration.
Option E, which suggests increasing the top velocity the car can travel, is not directly related to acceleration. Top velocity refers to the maximum speed that a car can reach, whereas acceleration refers to the rate of change of velocity. While increasing the car's top velocity may indirectly affect acceleration, it is not a direct solution to increasing acceleration.
Option A and D.
For more such questions on car's acceleration visit:
https://brainly.com/question/28648556
#SPJ11
Why do diving seabirds need to account for the bending of light?
2-3 sentence response.
Diving seabirds need to account for the bending of light because water has a higher refractive index than air.
When light passes through the air-water interface, it slows down and changes direction, causing the image of an object to appear distorted. This phenomenon is known as refraction. For diving seabirds, the refraction of light can make it challenging to accurately locate their prey when diving, which is essential for their survival.
To account for the bending of light, diving seabirds have evolved specialized eyes that allow them to adjust their focus and perceive images differently than humans. These adaptations enable the birds to see through the distorted image caused by refraction and accurately locate their prey while diving. One adaptation that diving seabirds have is a flattened cornea, which allows them to maintain a sharp focus while diving.
Overall, the ability of diving seabirds to account for the bending of light is essential for their survival, as it enables them to accurately locate and catch their prey while diving in the often murky and challenging conditions of the ocean.
Know more about Refractive Index here:
https://brainly.com/question/83184
#SPJ11
a transverse wave and a compressional wave. Give an example of each type.
A transverse wave moves perpendicular to the particle vibration, while a compressional wave moves parallel to the particle vibration. Light waves are an example of a transverse wave, and sound waves are an example of a compressional wave.
A transverse wave is a type of wave in which the particles of the medium vibrate perpendicular to the direction of the wave's propagation. This means that as the wave moves forward, the particles move up and down or side to side. An example of a transverse wave is a light wave. When light travels through space, the electric and magnetic fields oscillate perpendicular to the direction of the wave.
A compressional wave is a type of wave in which the particles of the medium vibrate parallel to the direction of the wave's propagation. This means that as the wave moves forward, the particles move back and forth, creating compressions and rarefactions in the medium. An example of a compressional wave is a sound wave. When sound travels through air, the molecules of air vibrate back and forth, creating areas of high pressure (compressions) and low pressure (rarefactions).
In summary, a transverse wave moves perpendicular to the particle vibration, while a compressional wave moves parallel to the particle vibration. Light waves are an example of a transverse wave, and sound waves are an example of a compressional wave.
for more such question on transverse wave
https://brainly.com/question/14693510
#SPJ11
the temperature rise a motor when operating for 25 minutes on full load is 25 degrees Celsius and becomes 40degree when the motor operates for another 25 minutes on same load determine heating time constant and steady state temperature.
The heating time constant is 13 seconds and the steady state temperature is 38°C.
How to determine time and temperatures?To find the heating time constant and steady state temperature, use the formula:
ΔT = P × R × (1 - e^(-t/τ))
where ΔT = temperature rise, P = power, R = thermal resistance, t = time, τ = heating time constant, and e = natural logarithmic constant.
Let's use the given information to solve for τ:
ΔT1 = 25°C (for the first 25 minutes)
ΔT2 = 40°C (for the second 25 minutes)
t = 25 + 25 = 50 minutes
The temperature rise over the entire 50 minutes is:
ΔT = ΔT1 + ΔT2 = 25°C + 40°C = 65°C
The average power can be calculated as:
P = ΔT / (t × R)
Assume that the power output is the rated power of the motor. Let's assume that the rated power is 100 W.
Then, solve for R:
R = ΔT / (t × P) = 65°C / (50 min × 100 W) = 0.13 °C/W
Now, solve for the heating time constant:
τ = R × C
where C = thermal capacitance. Value of C is unknown, but make an assumption that the thermal time constant is on the order of minutes to hours. Let's assume that C = 100 J/°C.
Then, τ = 0.13 °C/W × 100 J/°C = 13 seconds
Finally, solve for the steady state temperature:
ΔT = P × R
T_ss = T_amb + ΔT = 25°C + 100 W × 0.13°C/W = 38°C
Therefore, the heating time constant is 13 seconds and the steady state temperature is 38°C.
Find out more on temperature here: https://brainly.com/question/25677592
#SPJ1
A 10 KVA, 380 V, 50 Hz, 3-phas, star-connected salient pole alternator has direct axis and quadrature axis reactances of 12 ohms and 8 ohms respectively. The armature has resistance of 1 ohin per phase, The generator delivers rated load at 0.8 p,f lagging with the terminal voltage being maintained at rated value. If the load angle is 16.15, determine (i) the direct axis and quadrature axis components of armature current, (b) excitation voltage of the generator.
Direct axis and quadrature axis components of armature current are 30.28 A and 46.92 A respectively, and the excitation voltage of the generator is 765.36 V.
Given:
Apparent power (S) = 10 KVA = 10,000 VA
Line voltage (V) = 380 V
Frequency (f) = 50 Hz
Xd = 12 ohms
Xq = 8 ohms
Ra = 1 ohm
Power factor (pf) = 0.8 lagging
Load angle (δ) = 16.15 degrees
(i) Armature current's direct axis and quadrature axis components
We know that the apparent power is given by S = 3VLILcos(φ), where VL is the line voltage, IL is the line current, and φ is the angle between them. For a star-connected alternator, line voltage is equal to phase voltage, so we can write:
S = 3Vphase Iphase cos(φ)
Iphase = S / (3Vphase cos(φ))
For a lagging power factor, cos(φ) = 0.8, so
Iphase = 10,000 / (3 x 380 x 0.8) = 10.46 A
The direct axis component (Id) and the quadrature axis component (Iq) make up the armature current. Using the given values of Xd, Xq, and Ra, we can calculate these components as follows:
Id = (VL - IaRa) / Xd
Iq = (VL - IaRa) / Xq
where Ia is the magnitude of the armature current, which is equal to the magnitude of the line current divided by √3. Thus,
Ia = Iphase / √3 = 10.46 / √3 = 6.03 A
Substituting the given values:
Id = (380 - 6.03 x 1) / 12 = 30.28 A
Iq = (380 - 6.03 x 1) / 8 = 46.92 A
(ii) Excitation voltage of the generator:
The excitation voltage (E) of the generator is given by:
E = Vphase + IqXq
Substituting the given values:
E = 380 + 46.92 x 8 = 765.36 V
Therefore, the direct axis and quadrature axis components of armature current are 30.28 A and 46.92 A respectively, and the excitation voltage of the generator is 765.36 V.
Learn more about voltage here:
https://brainly.com/question/27861305
#SPJ1
an athlete runs some distance before taking a long jump, why?
Answer:
To gain momentum before the jump is made
a cello plays a c# note with a frequency of 346.2hz. if the speed of sound in air is 225m/s, what is the wavelength of this note?
The wavelength of the note produced by the cello is 0.65 m.
The frequency of the note played by cello, f = 346.2 Hz
Speed of the sound in air, v = 225 m/s
Speed of a wave is calculated by taking the product of its frequency and wavelength.
The expression for the speed of the sound wave is given by,
v = fλ
where λ is the wavelength of the note produced.
Therefore, the wavelength of the note produced by the cello,
λ = v/f
Applying the values of v and f,
λ = 225/346.2
λ = 0.65 m
To learn more about wavelength, click:
https://brainly.com/question/12924624
#SPJ1
Why would you want to build a house with materials having a high specific heat
Materials with high specific heat include materials such as concrete, masonry, adobe, and some types of stone. These materials can be used in walls, floors, or roofs to provide thermal mass and improve indoor comfort, energy efficiency, and sustainability.
The unit of power is the
a. Joules
b. m/s
C. Watts
d. Newtons
Answer:
It could be both Joules or Watts, Watts for electrical measurements and Joules for power measuremnets.
Hope this helps :)
Pls brainliest...
of
30. A person with a low prejudice profile is likely to reject negative stereotypes
a. Ignore and avoid the conversation.
●b. But also list qualifiers about the ethnic group.
●c. But also list negatives about the ethnic group.
●d. And also list positives about the ethnic group.
A person with a low prejudice profile is likely to reject negative stereotypes. Option A.
Low prejudice profileA person with a low prejudice profile is likely to reject negative stereotypes and not make assumptions about individuals based on their group membership.
This is because a person with a low prejudice profile is more likely to have a positive attitude toward diverse groups and recognize that individuals within a group can vary widely in their abilities, attitudes, and behaviors.
By listing positives about the ethnic group, this person can acknowledge the group's strengths and challenge any negative stereotypes that may exist.
Options (a), (b), and (c) do not reflect a low prejudice profile and may perpetuate negative stereotypes or avoid the conversation altogether.
More on low prejudice profile can be found here: https://brainly.com/question/7859402
#SPJ1
ver-P = W
(Remember these are metric units!)
Work-W = Fd
I. Solve and show your work
a. If a man carries a 44 pound box of books up a flight of stairs and he has a mass of 100
kg himself. How much work is done if the distance up is 10 meters?
*(remember he must lift himself and the box up the stairs)
b. How much power is necessary to do this in only I minute?
A. The work done, given that the distance is 10 meters is 11756.08 Joules
B. The power necessary to do the work is 195.93 W
A. How do i determine the work done?First, we shall convert 44 pound to Kg. Details below:
1 pound = 0.4536 Kg
Therefore,
44 pound = 44 × 0.4536
44 pound = 19.96 Kg
Finally, we shall determine the work done. Details below:
Mass of book = 19.96 KgMass of man = 100 KgTotal mass (m) = 19.96 + 100 = 119.96 KgAcceleration due to gravity (g) = 9.8 m/s² Force (F) = mg = 119.96 × 9.8 = 1175.608 NDistance (d) = 10 metersWorkdone (Wd) =?Work done (Wd) = force (F) × distance (d)
Work done (Wd) = 1175.608 × 10
Work done (Wd) = 11756.08 Joules
B. How do i determine the power?The power necessary to do the work can be obtain as follow:
Work done (Wd) = 11756.08 JTime (t) = 1 minute = 1 × 60 = 60 secondsPower (P) = ?Power is defined according to the following formula:
Power = Work done / time
P = Wd / t
P = 11756.08 / 60
Power = 195.93 W
Learn more about workdone:
https://brainly.com/question/14667371
#SPJ1
The winter sport of curling involves sliding a large granite stone on ice with the objective of placing it closest to the center of the ring. The curler causes the path of the stone to curve by giving it an initial circular rotation. Sweepers use brooms to sweep the path in front of the stone. How does the motion of the sweepers relate to the conservation of angular momentum?
The sweepers minimize friction between the stone and ice which helps maintain the angular momentum.
The sweepers motion creates circular air motion which adds to the angular momentum.
The sweepers motion adds torque to the stone's angular momentum.
The sweepers create circular patterns in the ice to increase the angular momentum.
Answer:
The sweepers motion adds torque to the stone's angular momentum.
Explanation:
This is due to angular momentum law.
a bus with a maximum speed of 20m/s takes 21sec to travel 270m from stop to stop. Its acceleration is twice as great as its deceleration. Find: A, the acceleration B, the distance traveled at maximum speed
Answer:
We can use the kinematic equations to solve this problem.
Let a be the acceleration and d be the distance traveled at maximum speed.
First, we can use the equation:
d = vt + (1/2)at^2
where v is the maximum speed, t is the time traveled at maximum speed, and a is the acceleration.
We know that the bus takes 21 seconds to travel 270 meters, so the time traveled at maximum speed is:
21 - 2a = t
We also know that the acceleration is twice as great as the deceleration, so we can write:
a = 2d
Then, we can substitute these expressions into the first equation:
d = (20)(21 - 2a) + (1/2)(2d)(21 - 2a)^2
Simplifying and solving for d, we get:
d = 210 - 5.25a + 0.25a^2
To find the acceleration, we can use the fact that the maximum speed is reached at the midpoint of the trip, so the distance traveled at maximum speed is half the total distance:
d = 1/2(270)
Solving for d, we get:
d = 135
Substituting this value into the equation for d, we get:
135 = 210 - 5.25a + 0.25a^2
Simplifying and solving for a, we get:
a = 8 m/s^2
Finally, we can use the equation:
d = vt
to find the distance traveled at maximum speed:
d = (20)(21 - 2a)
Substituting the value of a, we get:
d ≈ 188.4 m
Therefore, the acceleration of the bus is 8 m/s^2 and the distance traveled at maximum speed is approximately 188.4 meters.
A piece of metal at the bottom of a beaker is 0.50m below the eye. If water is poured into the cylinder to a depth of 0.24m . how much closer does the metal appear? (Refractive index of water = 4/3)
If a piece of metal at the bottom of a beaker is 0.50m below the eye, and water is poured into the cylinder to a depth of 0.24m, Then the metal appears closer by 0.38m.
To calculate how much closer the metal appears, we can use the lens maker's formula, which relates the object distance, image distance, and focal length of a lens or in this case, the refractive index of water.
The formula is:
1/f = (n - 1) x (1/R1 - 1/R2)
where f is the focal length, n is the refractive index of the medium (water in this case), R1 is the radius of curvature of the first surface of the medium (in this case, the bottom surface of the beaker), and R2 is the radius of curvature of the second surface of the medium (in this case, the air-water interface at the top of the water level).
Assuming the radius of curvature of both surfaces is large and the surfaces are nearly flat, we can approximate R1 and R2 as infinity, so the formula simplifies to:
1/f = (n - 1) x (1/R2)
Since the piece of metal is at the bottom of the beaker, it acts as the object, and the eye acts as the observer. Initially, the object distance is the distance from the bottom of the beaker to the eye, which is 0.50m.
When water is poured into the beaker to a depth of 0.24m, the new object distance is the distance from the bottom of the beaker to the water level, which is 0.50m - 0.24m = 0.26m.
To calculate the image distance, we can use the thin lens equation:
1/f = 1/o + 1/i
where o is the object distance, and i is the image distance.
Solving for i, we get:
i = (1/f - 1/o)^-1
Since we know that the object distance o is 0.26m, we just need to calculate the focal length f using the lens maker's formula.
1/f = (n - 1) x (1/R2) = (4/3 - 1) x (1/0.24m) = 1/0.72m
f = 0.72m
Plugging in the values, we get:
i = (1/0.72m - 1/0.26m)^-1 = 0.12m
Therefore, the metal appears closer by 0.50m - 0.12m = 0.38m.
To learn more about the Refractive index click:
brainly.com/question/30761100
#SPJ1
Pressure is applied from a gas cylinder to one side of a U-tube manometer with constant internal diameter “D", as shown below. The manometer is filled with fresh water (density = 999 kg/m3) and upon application of the pressure, the water column on one side rises by 4.00 cm relative to the other. Draw and label a free-body diagram representing the forces in the manometer. Calculate the pressure above atmospheric pressure applied by the gas.
Answer:
P = 39200.76
Explanation:
formula is:
P = pgh
P = pressure
p = density of fluid
g = acceleration due to gravity ( 9.81 m/s2 for earth)
h = height above the point we are looking for
P = pgh
P = 999x9.81x4
P = 39200.76
What was the molar mass from number 1?
The question is incomplete. Could you please provide more details or clarify your question? I will explain molecular mass.
A substance's molecular mass, measured in grams per mole (g/mol), is referred to as its molar mass. It is utilized in many chemical computations and conversions and is computed by adding the atomic masses of the atoms in a molecule.
The molar mass is the mass of one mole of a substance, expressed in grams per mole (g/mol). It is calculated by summing the atomic masses of all the atoms in a molecule. The atomic masses can be found on the periodic table. Molar mass is important in various applications, such as stoichiometry, where it is used to convert between the mass of a substance and the number of moles.
It is also used to determine the empirical formula and molecular formula of compounds. Molar mass plays a crucial role in chemical reactions and calculations involving the quantities of substances, providing a bridge between the microscopic realm of atoms and molecules and the macroscopic world of everyday measurements.
Therefore, Molar mass refers to the mass of one mole of a substance, expressed in grams per mole (g/mol). It is calculated by summing the atomic masses of the atoms in a molecule and is used in various chemical calculations and conversions.
To learn more about the equation for molality click:
https://brainly.com/question/30640726
#SPJ1
The diagram shows two circuits.
Which statement correctly describes each circuit?
A. The bulbs in both circuits are connected in series.
B. The bulbs in Circuit 1 are connected in parallel, and the bulbs in Circuit 2 are connected in series.
C. The bulbs in both circuits are connected in parallel.
D. The bulbs in Circuit 1 are connected in series, and the bulbs in Circuit 2 are connected in parallel.
Answer:
(D is correct
A person standing on the roof of a building drops a 0.125 Kg ball on the ground. A
child on eight floor saw the ball passing with a speed of 33.1 m/s. The first floor of the building
is 12.0 m high and each successive floor is 8.00 m high. Determine the total numbers of floors
in the building. How fast was the ball falling just before it hit the ground? What was its kinetic
energy just before it hit the ground?
Answer:
V = a t velocity after time t
t = 33.1 / 9.80 = 3.38 sec (time ball had been falling)
S = 1/2 a t^2 = 55.9 m
So the ball had been falling for 7 * 8 = 56 m
The child was 7 floors from the top
Since he was on the eight floor the floors below him were
7 * 8 + 12 = 68 m total floors below child
68 + 56 = 124 m total height of building
Total floors in building = 7 + 7 + 1 = 15 floors
PE at top = KE at bottom
KE = m g h = .125 * 9.80 * 124 = 152 Joules
which type of electromagnetic wave has more energy than ultraviolet waves?
A Visible light
B Infrared
C Microwaves
D X-rays
Answer:
D. X-rays have more energy than ultraviolet waves.
What is the greatest average speed of blood flow at 37∘C in an artery of radius 2.25 mm if the flow is to remain laminar? Take the density of blood to be 1025 kg/m3,
and the viscosity to be 2.084×10^−3 Pa·s.
The Hagen-Poiseuille equation may be used to determine the blood flow rate that is maximum on average at 37°C in an artery with a radius of 2.25 mm. According to this equation, the volumetric flow rate of a laminar flow is equal to the fourth-power product of the vessel's radius (r) and the pressure difference (P) divided by the fluid's viscosity ().
It also takes into account the length (L) of the vessel. The highest average blood flow rate in an artery with a radius of 2.25 mm may be computed using the information provided as follows: Q = (2.25^4 * ΔP) / (2.084*10^-3 * L) Q = (2.25^4 * ΔP) / (2.084*10^-3 * L) Q = (2.25^4 * ΔP) / (2.084*10^-3 * L) Q = (2.25^4 * ΔP) / (2.084*10^-3 * L)
Consequently, the highest average blood flow rate at Therefore, the greatest average speed of blood flow at 37∘C in an artery of radius 2.25 mm is equal to (2.25^4 * ΔP) / (2.084*10^-3 * L).
Learn more about viscosity at:
https://brainly.com/question/30577668
#SPJ1
. Date Find the speed of a sound in the air If it has a frequency of 1120hz and A mavelength of 30cm.
Answer:
Therefore, the speed of sound in air, with a frequency of 1120 Hz and a wavelength of 30 cm, is approximately 336 meters per second.
Explanation:
To find the speed of sound in air, we can use the formula:
speed = frequency × wavelength
Given:
Frequency (f) = 1120 Hz
Wavelength (λ) = 30 cm
First, we need to convert the wavelength to meters since the speed of sound is commonly expressed in meters per second.
1 meter = 100 centimeters
Wavelength in meters (λ) = 30 cm ÷ 100 = 0.3 meters
Now we can substitute the values into the formula:
speed = frequency × wavelength
= 1120 Hz × 0.3 meters
Calculating the value:
speed = 336 meters per second
1. A body of mass 200 g rotates from rest to 3 rads/s in 1.5 s on a path whose radius of gyration is 50 cm. The torque is .... A. 0.05 B. 1.50 C. 0.075 D. 0.10
Two uniform solid spheres, each with mass 0.852 kg
and radius 8.00×10−2 m are connected by a short, light rod that is along a diameter of each sphere and are at rest on a horizontal tabletop. A spring with force constant 153 N/m has one end attached to the wall and the other end attached to a frictionless ring that passes over the rod at the center of mass of the spheres, which is midway between the centers of the two spheres. The spheres are each pulled the same distance from the wall, stretching the spring, and released. There is sufficient friction between the tabletop and the spheres for the spheres to roll without slipping as they move back and forth on the end of the spring.
Assume that the motion of the center of mass of the spheres is simple harmonic. Calculate its period.
The period of the simple harmonic motion of the center of mass of the two spheres is approximately 0.770 seconds.
To find the period of the simple harmonic motion of the center of mass of the two spheres, we need to use the equation for the period of a mass-spring system:
T = 2π√(m/k)
where T is the period, m is the total mass of the system (two spheres), and k is the spring constant.
First, we need to find the total mass of the system:
m = 2m1 = 2(0.852 kg) = 1.704 kg
where m1 is the mass of one sphere.
Next, we need to find the spring constant:
k = 153 N/m
Now, we can calculate the period:
2π√(1.704 kg/153 N/m) ≈ 0.770 s
For more such questions on center
https://brainly.com/question/28021242
#SPJ11
A swimmer swims the 50m length of a swimming pool in 15.91 seconds. He makes the return swim in 18 seconds. What is the swimmer's average speed for the full swim?
If a swimmer swims the 50m length of a swimming pool in 15.91 second and makes the return swim in 18 seconds then the swimmer's average speed for the full swim is 2.948 metres per second.
To find the swimmer's average speed for the full swim, we need to calculate the total distance swum and the total time taken.
The swimmer swam the 50m length of the pool twice, once in 15.91 seconds and once in 18 seconds. So the total distance swum is 50m + 50m = 100m.
The total time taken is the sum of the time taken for each length: 15.91 seconds + 18 seconds = 33.91 seconds.
To find the swimmer's average speed, we divide the total distance by the total time:
Average speed = total distance ÷ total time
= 100m ÷ 33.91 seconds
= 2.948 metres per second
Therefore, the swimmer's average speed for the full swim is 2.948 metres per second. This is a relatively fast speed, but it's important to note that the swimmer's speed may vary depending on their stroke technique, physical fitness, and other factors. Nonetheless, it's an impressive achievement for the swimmer to complete the full 100m in under 34 seconds.
for more such question on average speed
https://brainly.com/question/24739297
#SPJ11
