water flowing via the condenser, turbine, and boiler.
Which of the following best summarizes the second law's Kelvin-Planck statement?The Kelvin-Planck Statement states that it is impossible to build a machine that runs on a cycle and generates work just by transferring heat from a single body.
A device that transforms heat input to work output is which of the following?A heat engine is a device used in engineering and thermodynamics that transforms heat into mechanical energy that may be utilized to do mechanical labor.It accomplishes this by lowering the temperature of a functioning substance from one that is higher.
To know more about nuclear reactor visit:
https://brainly.com/question/13869748
#SPJ4
You may not cross a single broken white or yellow line:
If you can do so safely and without obstructing other vehicles, you may cross a single broken line to pass or change lanes.
What does it signify when there is a solid yellow line next to a broken one?
When there are solid yellow lines and broken yellow lines, passing is allowed on the side with the broken line. It is forbidden to pass on the side with the solid line. Passing is not allowed on double solid yellow lines in either direction, although left turns are allowed when the lines are crossed.
What does a yellow line that is broken or dashed mean?
Image outcome-when it is safe to do so, cars in lanes moving in either direction may pass on a single broken yellow line. only one solid line. Means that passing is permitted in both directions but should be done very carefully.
To know more about broken white yellow line visit:
https://brainly.com/question/29648759
#SPJ4
HELP please thx it would help
Two or more resistors are said to be connected in series when the same amount of current flows through all the resistors.
Define resistors?
A resistor is an electrical component that limits or regulates the flow of electrical current in an electronic circuit. Resistors can also be used to provide a specific voltage for an active device such as a transistor.The resistor is a passive electrical component that creates resistance in the flow of electric current. In almost all electrical networks and electronic circuits they can be found. The resistance is measured in ohms (Ω).Examples of variable resistors are rheostat and digital potentiometer. Rheostats are electrical components made of a resistive wire wound around a ceramic core. In the past, they were used to control the amount of power in motors, heaters, and ovens.
To learn more about series refers to:
https://brainly.com/question/9494049
#SPJ1
complete the two-column proof of the alternate interior angles converse. given $\angle4\cong\angle5$ prove $g\ \parallel\ g$ line g and line h are cut by a transversal so that an angle labeled angle 4, formed by the intersection of the transversal and line g, and an angle labeled angle 5, formed by the intersection of the transversal and line h, are congruent alternate interior angles. an angle labeled angle 1, formed by the intersection of the transversal and line g, and angle 4 are vertical angles.
Therefore, L=90 o in the parallelogram GMHL. At G and H, respectively, two parallel lines AB and CD and a transversal EF intersect them.
The bisectors of the two pairs of interior angles are GM, HM, GL, and HL.
GMHL is a rectangle, to prove.
Proof:
∵AB∥CD
∴∠AGH=∠DHG (Alternate internal angles) (Alternate interior angles)
The formula is 2 1 AGH = 2 1 DHG.
GM and HL are the bisectors of AGH and DHG, respectively, so that 1=2.
GMHL (1 and 2 are equal and come from a pair of opposite interior angles)
Likewise, GLMH
GMHL is therefore a parallelogram.
∵AB∥CD
BGH + DHG = 180 o
⇒∠L=180 \so\s −90 \so
⇒∠L=90 \so
Therefore, L=90 o in the parallelogram GMHL.
Learn more about interior here-
https://brainly.com/question/24735077
#SPJ4
Looking at the diagram, which vehicles are required to stop for the school bus (red) on a two lane road?
A, B & C
A only
B & C
No matter how many traffic lanes or if a turn lane is present, drivers in both directions of a two- or multi-lane highway are required to stop and remain stopped until the flashing red bus lights are turned off.
Only lanes of traffic moving in the same direction as the school bus must come to a complete stop. To get to their home, students shouldn't have to cross four or more lanes of traffic. The school bus had to stop. To get to their home, students shouldn't have to cross four or more lanes of traffic. On a two-lane road, when a school bus stops and flashes its red lights, traffic coming from either direction must stop before passing the bus. on multilane roads. on roadways with dividers.
To learn more about traffic, please check:
https://brainly.com/question/30312997
#SPJ4
FILL INN THE BLANK To select multiple sketch entities, press and hold down the ______ key on the keyboard while selecting multiple entities.
Press the Ctrl keys on the keyboard while choosing multiple sketch entities, holding the key down.
What is the proper click sequence for a three-point arc?First, choose the 3 point arc tool to start drawing an arc.To set your starting point, click on the first position.To choose your second paragraph, the arc's endpoint, click inside the second place. Next, click in the third position to choose the radius.
What shortcut on the keyboard can be used to launch the sketching dimension tool?You may access the sketch size tool from the sketching dropdown list, which is located at the bottom of this list.The letter "D," as in Delta, on the keyboard shortcuts can also be used to activate it.
To know more about keyboard visit:
https://brainly.com/question/24921064
#SPJ4
Prototypes do all of the following except
A)allow for experimentation with new ideas.
B) provide a way to test improvements and fix flaws.
C) create a physical model in the early design stages
D) remain unchanged throughout the design process
Prototypes don't do: (Option D) remain unchanged throughout the design process.
Prototypes are used to experiment with ideas, test improvements and fix flaws, and create physical models during the design process, but they can change throughout the design process.
Prototypes are used to experiment with ideas, test improvements and fix flaws, and create physical models during the design process. They are an important part of the design process, as they allow designers to identify problems, discover solutions to those problems, and make necessary changes during the development process. Prototypes are not static, and can change throughout the design process in order to more accurately reflect the final product. This allows designers to ensure that the final product meets their needs and the needs of their users.
Learn more about Prototypes: https://brainly.com/question/29450558
#SPJ4
true/false: most of the materials we use in engineering applications today were developed before the year 1900. true/false: most of the materials we use in engineering applications today were developed before the year 1900. true false
The given statement that "most of the materials that are being used today in engineering applications were developed before the year 1900" is true because the concept of engineering has existed since ancient times as humans devised fundamental inventions such as the lever, pulley, and wheel.
Civil engineering has been an aspect of human life since the beginning of human existence. The earliest practices of civil engineering may have commenced between 4000 and 2000 BC in Mesopotamia (Ancient Iraq) and Ancient Egypt when humans started to abandon a nomadic existence, therefore causing a need for the construction of shelter.
These all civil practices or inventions are consistent with the modern definition of engineering, exploiting primary mechanical principles to develop useful objects and tools.
To learn more about Civil engineering at
https://brainly.com/question/25840283
#SPJ4
given 5 rocks of different weight and lever scales, in 7 tests sort the rocks by weight. show that for all outcomes of comparisons you will find the correct order by the 7th comparison.
A balance puzzle, sometimes known as a weighing puzzle, involves using balance scales to weigh objects.
Problem with level of weight and rocks?
We begin by comparing A>B and C>D. The two heavier ones are measured next, and we find that A>C. This handily reduces our options for the stones A, B, C, and D to just three. Specifically, ABCD, ACBD, and ACDB Notably, stone C is positioned perfectly in the centre, either as number 2 or number 3. As a result, we compare stone E to stone C. If E turns out to be heavier than A, we compare it against A. We compare it to stone D to see if E is lighter.
What is the absolute minimum to find the heavier rock?
Label the nine rocks as A, B, C, D, E, F, G, H and I
Put them in groups of ABC, (1)DEF, (2), and GHI.
(3) Place the rocks from group (1) in one pan and those from group (2) in the other pan. If they are of same weight, then neither group (1) nor group (2) of rocks contain the slightly heavier rock.
Rock G should now go in one pan and Rock H should go in the other. If they both weigh the same, the heavier rock is I.
If rock G is heavier than rock H when they are placed in separate pans, then G will be the heavier.
To know more about lever scales visit:
https://brainly.com/question/15686566
#SPJ4
For the pseudo-code program below, assume that the array name my_array has 10 cells that have been populated with numbers that are in the range of 1 to 1000. n = 0 X = 1 while (n < 10)if (my_array[n] < x) then x = my_array[n] n = n + 1 print x The output of this program will be: 1 12 11 1000 10
Well, the nice thing about pseudocode is that it doesn’t need to match anything that a compiler or interpreter would recognize as valid syntax. Thus, you can basically write it any way you want, as long as the intention is clear.
The idea of pseudocode is that you describe the program flow, without getting bogged down into the specifics of a particular language.That being said, some programming languages use the len function or method, which some might write as length … so you might write something like:
len(my_array) # using a function
length(my_array)
my_array.length # using a property or attribute
my_array.length() # using a method
Of course, you can substitute any word you find convenient, for example, size of my_array, or size_of(my_array).
Learn more languages here:
https://brainly.com/question/25619594
#SPJ4
TRUE/FALSE. rapid development programming languages have features like built-in libraries and tools, which make writing code faster.
Rapid development programming languages include tools and libraries built in that speed up writing code. True.
Which language has the most libraries?Python is approachable and adaptable for a variety of programming tasks because it is based on English grammar. The well-known programming language Python has a sizable user base, robust libraries, and a wide range of frameworks.
Programming libraries are useful tools that can expedite a web developer's work. They provide prewritten, reusable code fragments so that developers may quickly and simply create programs.
What dialect is employed for quick prototyping?The robust interactive environment that LISP offers enables the quick prototyping of intricate software. This has always been a key aspect of the language and has helped to increase its popularity for novel applications.
To know more about programming languages visit:-
https://brainly.com/question/9303346
#SPJ4
write a complete java program that calculates the local annual tax for residents in where they live. input: annual income of a resident in dollar amount age of the resident. if the age is 60 or older, this resident is regarded as a senior person. processing: the tax rate for any individual with an annual income $50,000 or less is zero. the tax rate for any individual with an annual income $100,000 or less but more than $50,000 is 7%. other people will have a tax rate of 9%. second, determine the senior discount. if a resident has a non-zero tax rate after step 2.1 and is also a senior, his/her tax rate shall be reduced by 3%. at the end, with the tax rate finalized through steps 2.1 - 2.2, calculate the tax. output: display the following items with proper prompt. tax amount tax rate senior discount percentage rate if applied.
Amount= Percentage×GrossSalary/100 and then the below formula is used. This is a simple arithmetic calculation that will give you your desired result i.e., the net salary or salary-in-hand.
Define annual tax?Annual Tax refers to the amount of real property tax owed on a property for a fiscal year, as calculated after deducting any amounts from which the property is exempt or whose payment has been suspended in accordance with the applicable laws.
A tax is a mandatory payment or charge that is gathered by local, state, and federal governments from citizens or companies to pay for essential public goods, services, and activities.
Progressive taxes are those in which a higher percentage of the income of high-income groups is taken than that of low-income groups. An equal percentage of income from each income group is taken as a tax under a proportional system. Regressive taxes—Taxes that take a larger percentage of low-income groups' income than high-income groups—are those that are imposed.
To learn more about tax refers to:
brainly.com/question/26316390
#SPJ4
Installing an additional filter provides an extra level of protection for the compressor
and expansion valve or orifice tube.
true
false
It is accurate what is said. The compressor, expansion valve, and orifice tube are further protected when an additional filter is installed.
What is meant by orifice tube?The orifice tube expands the refrigerant but, unlike the expansion valve, is unable to control flow rate and superheating. It has a specific length and cross-section. At the evaporator output, an accumulator is always connected to the orifice tube.The A/C system's high and low pressure parts are separated by orifice tubes. Orifice tubes are a fairly straightforward item with no moving parts that also function as a refrigerant filter. Because orifice tubes can accumulate debris, they must always be replaced. Systems without expansion valves employ orifice tubes. The orifice tube regulates how much refrigerant enters the evaporator, similar to an expansion valve.To learn more about orifice tube, refer to:
https://brainly.com/question/10011547
#SPJ1
The two member frame is pin connected at E. The cable is attached to D, passes over the smooth peg at C, and supports the 500-N load. Dtetermine the horizontal and vertical components at each pin.
The horizontal and vertical components at each pin is Ay =500N, Ax =2.50KN calculated with the help of equilibrium.
Create the member BD's free body diagram.
Think about that for a moment. B. MB = 0 Ex (0.5m) - Ey (0.5m) + 500 (2m) = 0 Ex (0.5m) - Ey (0.5m) = 1000 Ex (0.5m) - Ey (0.5m) = 2000
Create the member AC's free body diagram.
Think about that for a moment. A.\s∑MA=0
Ey (0.5m) + Ex (0.5m) = 2000 Ex + Ey = 4000 Ey (0.5m) + Ex (0.5m) = 500 (2m) - 500 (2m) = 0
Solve the equations in (2)
Ey =1000N= 1KN
Ex =3000N =3 kN
For member BD, jot down the equilibrium force equations.
Equilibrate the x-axis forces at Fx=0
Bx + (500 N) - (Ex) = O Bx + (500 N) - (3 K N) = 0
Bx =2.50kN
Fy = 0 to equate the forces acting along the y-axis
By-(Ey)=0
By -(1KN)=O
By = 1kN
For member AC, jot down the equilibrium force equations.
Equilibrate the x-axis forces.
∑Fx =0
For example, (500N) -(Ax)=0 (3kN) -(500N) -(Ax)=0 Ax=2.50KN
Forces on the y-axis should be equalised.
∑Fy =0
By - (500N) - (Ay) =0
(1KN) - (500 N) - (Ay) =0
Ay =500N
Learn more about Equilibrium here:
https://brainly.com/question/13258910
#SPJ4
How many objects can an ArrayList store?
Given that ArrayList in Java is supported by a built-in array, the size restriction is equal to that of an array, or 2147483647.
Java creates an ArrayList object with a default capacity of 10 when you create it without specifying a capacity. ArrayList automatically resizes when the size (number of elements in the array list) increases over a certain threshold since it is a growable array. The fact that ArrayLists may only contain objects and not simple types like ints is a fundamental restriction of array lists. Use the get() function to fetch elements from an ArrayList. Use the size() function to get an ArrayList's size.
To learn more about ArrayList click the link below:
brainly.com/question/17265929
#SPJ4
An action plan is a written strategy used to achieve outlined goals. For the purposes of this assignment, the action plan will be created using PowerPoint. An action plan includes the components listed below, and you may refer to page 237 in the textbook for additional guidance. State the goal, which should identify what training content will be used and how it will be used. The goal for this action plan is to assist managers with identifying how performance appraisals are used to demonstrate the success of training efforts. Include the strategies for reaching the goal including what the trainee must do, what resources will be needed, and the type of support from managers and peers that will be necessary. Include the strategies for receiving the feedback, which will be used to demonstrate the success of the training efforts. Define the expected assessment results and how the results can be used to improve training. After the title slide, begin your action plan by stating the goal. Next, identify at least three strategies for reaching the goal. Briefly explain your chosen strategies with supporting data in the speaker notes section of the PowerPoint presentation. For the third part of the action plan, develop a 10-question survey that could be used to demonstrate the success of the plan. Conclude your action plan with a summary of the expected results and how the manager could use them to improve training. Here are some general guidelines to follow when preparing your PowerPoint presentation. Design your presentation with the back of the room in mind. It is important that everyone can easily see and read the content. Select a professional-looking slide design appropriate for the presentation and audience. White text on a dark background is the easiest for the audience to see. Use a large font size. Use color and graphics when appropriate. Illustrations should relate to the content being discussed. Be creative. Follow the 6 x 6 rule (i.e., use no more than six lines per slide and no more than six words per line). Utilize the speaker notes function to add your talking points. Bullet points work best on the slides. Add slide transitions to enhance the audience's experience.
Goals are main pillers of achivement and are the effective performance management process.
Training program should offer a variety of innovative programs. Programs should enhance knowledge, develop necessary skills, and enrich both the individual and the organization. Organizations must create a culture of learning.
Making departmental goals accessible to all managers ensures there is no overlap, reduces conflict, and allows members of different departments to see where they support each other and ensure they are not working at cross purposes.
S – Specific
M – Measurable
A – Achievable/Attainable
R – Results-Oriented/Realistic/Relevant
T – Time-Bound
Use Peer Reviews.
Offer Frequent Performance Feedback.
Utilize Performance Management Software.
Define and Communicate Company Goals and Performance Objectives.
Set Regular Meetings to Discuss Outcomes and Results.
Performance appraisal has three basic functions
(1) to provide adequate feedback to each individual on his or her performance.
(2) to serve as a basis for modifying or changing behavior toward more effective working habits.
(3) to provide data to managers with which they may judge future job assignments and compensation. The performance appraisal concept is central to effective management. Much hard and imaginative work has gone into developing and refining it. In fact, there is a great deal of evidence to indicate how useful and effective performance appraisal is. Yet present systems of performance appraisal do not serve any of these functions well.
4 steps to add an action plan
Department: Choose the department you wish to create an Action Plan for from the list provided. This list includes all the departments you have been assigned access. You will want to create a separate action plan for each department.
Category: Type the name of the category needing improvement. This category can be found on your standard survey report and is listed as an “Attitude Area.” For example, “Immediate Supervision” is an attitude area.
Opportunity for Improvement: Select the description of the survey item you will be working to improve. Each survey item you are working on should have a separate action plan. For example, “My Supervisor Has Effective Communications” is a survey statement.
To know more about performance management visit:
https://brainly.com/question/29833837
#SPJ4
Effective performance management relies on goals, which are the primary predictors of success.
Innovative programs should be offered by training programs. Knowledge should be expanded, skills should be developed, and both the individual and the organization should benefit from the programs. A learning culture must be established by organizations.
By making departmental goals accessible to all managers, overlap is avoided, conflicts are reduced, and members of different departments can see where they complement one another and ensure that they are not working against each other.
S stands for specific, M for measurable, A for attainable, Achievable, and Relevant, R for results-oriented, realistic, and relevant, and T for time-bound use and peer reviews.
Provide regular feedback on performance.
Make use of software for performance management.
Establish and Communicate Performance Objectives and Company Goals.
Establish regular meetings to discuss results and outcomes.
The first and most fundamental function of performance evaluation is to provide each employee with sufficient feedback on their performance.
(2) to provide a foundation for altering one's behavior in the direction of more efficient work practices.
(3) to provide managers with data they can use to evaluate future job assignments and pay. The idea of performance reviews is essential to efficient management. It has been developed and refined through a great deal of creative and laborious effort. In fact, there is a lot of evidence that performance evaluation is useful and effective. However, the current performance evaluation systems do not adequately fulfill any of these requirements.
Add an action plan in four steps Department: From the provided list, select the department for which you would like to develop an Action Plan. All of the departments to which you have been granted access are on this list. A distinct action plan should be developed for each department. Category: Enter the name of the category that needs to be improved. This category is referred to as an "Attitude Area" in the standard survey report. One example of an attitude area is "Immediate Supervision."Possibility of Enhancement: Choose the description of the survey item that you intend to improve. A separate action plan should be created for each survey item that you are working on. A survey statement, for instance, is "My Supervisor Has Effective Communications."To know more about performance management :
brainly.com/question/29833837
#SPJ4
14. The air compressor isn't operating properly in Yves' yoga studio. This means the_____ can't operate properly.
O A. heat exchanger
B. pneumatic control
C. cooling plant
D. ventilation
my android cell phone is no longer ringing when i make a call or can not here the party that has called me unless speaker is on
If your Android device is silent, in Airplane Mode, or set to Do Not Disturb, you can determine if the ringing is not caused by a user-related issue.
Why am I unable to hear my phone calls unless the speaker is on?Make sure that automatic call audio routing is selected under Accessibility > Touch > Settings > Call Audio Routing. Try resetting your device or installing the most recent software.
When you call an Android but it doesn't answer, what does that mean?When someone calls, your Android phone won't ring for a variety of reasons, including: Your ringer volume has been decreased. Your phone is in airplane or Do Not Disturb mode. You made call forwarding available. Bluetooth is paired with your phone.
To know more about Airplane Mode visit :-
https://brainly.com/question/28274546
#SPJ4
gasoline is mixed with 8 ft3 of kerosene so that the volume of the mixture in the tank becomes 12 ft3 . determine the specific weight and the specific gravity of the mixture at standard temperature and pressure. 4 ft 2 ft 1 ft 3 ft\
The specific weight and the specific gravity of the mixture at standard temperature and pressure is 0.7868
Density of gasoline=48.693 l b/ f t^ 3
Density of kerosene=49.942 l b /f t^ 3
8 ft^3 of gasoline+4 ft^3 of kerosene.
resulting density= (8x48.693)+(4x49.942)/12=49.1 l b /f t^ 3
SG=P/PW=49.1/62.4=0.7868
Blending gasoline with kerosene results in increased density, decreased volatility, and a lower octane rating.
You can make JP-4 jet fuel by combining it 50-50. Kerosene is heavier than gasoline and has a much higher flash point, making it more difficult to burn and start. For safety, the flash point of jet fuel (kerosene) is 100F, and the flash point of gasoline is -50F.
To learn more about gasoline
https://brainly.com/question/29991915
#SPJ4
calculate the number of kilowatt-hours (kw-hrs) consumed by an 850-watt window air conditioner turned on for four (4) hours.
The kilowatt-hours consumed by an 850-watt window air conditioner turned on for four hours is 3.4 kw-h
Power is defined as the rate of work over a time period. Mathematically,
P = W/t
Where:
P = power
W = work done
t = time period
The unit of power is Watt which is equivalent to Joule/second. Another widely used unit is kw=h or kilowatt-hours.
Information available in the problem:
P = 850 Watt = 0.85 kw
t = 4 hours
Plug these parameters into the formula:
P = W/t
W = P x t
W = 0.85 x 4 = 3.4 kilowatt-hours.
Learn more about electrical power here:
https://brainly.com/question/9821162
#SPJ4
to see what is mounted on your system, and at which points, we need to run the mount program. what distributed file systems are mounted?
To determine which distributed file systems are mounted, you can run the command `mount -t <file_system_type>` and check to see if any distributed file systems are listed.
What is file systems?
A file system is a method of organizing and storing data on a computer or other digital device. It defines how files are named, stored, and organized on the storage device. File systems typically consist of files, directories, and other data structures to store, retrieve, and manipulate data. Commonly used file systems include the NTFS, HFS+, FAT, and EXT. These file systems organize data into logical clusters, which makes it easier to access and manage. File systems can also apply security settings to files, such as read and write permissions, to protect data and ensure only authorized users can access sensitive information. File systems are a critical component of an operating system, as they are responsible for managing the data on a storage device.
To learn more about file systems
https://brainly.com/question/13013721
#SPJ4
Next, you prepare for the question-and-answer session that will follow your presentation. To predict what questions they may ask, you do a colleague test of your presentation. You should choose a colleague who has deep expertise in the electric vehicle industry. True or False
The production and marketing of automobiles with electric motors are referred to as the "electric vehicle industry." This covers electric vehicles such as automobiles, lorries, buses, and motorbikes. Although they have been around for a while, electric cars have only just begun to gain popularity.
What is the electric vehicle industry?The price of electric cars is decreasing as battery technology advances. By 2030, it is anticipated that the price of electric vehicles will be lower than the price of gasoline-powered automobiles. All-electric and plug-in hybrid cars are the two primary categories of electric vehicles. While plug-in hybrids may operate on both gasoline and electricity, all-electric vehicles are only powered by electricity.
Globally, governments are encouraging the development of electric automobiles. Offering incentives like tax rebates and subsidies falls under this category. A specific percentage of sales automobiles must be electric according to various rules in some nations.
To know more about electric vehicles visit:
https://brainly.com/question/29869646
#SPJ4
Which type of instrument is most reliable for static and stable measurement?
A static and stable measurement is best achieved through the use of a precision instrument such as a digital multimeter or a precision balance. These instruments are specifically designed for accurate and reliable measurement in a static and stable environment. They typically have high resolution and precision, as well as advanced features such as temperature compensation and calibration. Additionally, they are often designed with robust and durable construction to ensure long-term reliability.
Please solve the following in Python or Java only
Lucy loves to play the Hop, Skip and Jump
game. Given an N*M matrix and starting from
cell (1,1), her challenge is to hop in an anti-
clockwise direction and skip alternate cells. The
goal is to find out the last cell she would hop
onto.
Write an algorithm to find the last cell Lucy
would hop onto after moving anti-clockwise
and skipping alternate cells.
Input
The first line of input consists of two integers-
matrix_ row and matrix_ col, representing the
number of rows (N) and the number of
columns (M) in the matrix, respectively.
The next M lines consist of N space-separated
integers representing the elements in each cell
of the matrix,
Output
Print an integer representing the last cell Lucy
would hop onto after following the given
instructions.
Example
Input.
3 3
29 3 37
15 41 3
1 10 14
Output
41
Explanation:
Lucy starts with 29, skips 15, hops onto 1, skip
10, hops onto 14, skips 3, hops onto 37, skips 8
and finally hops onto 41
So, the output is 41
Code in python
"""
matrix, represents the elements in each cell of the matrix of size N*M.
"""
def funcHopSkipJump(matrix):
# Write your code here
return
def main():
# input for matrix
matrix = []
matrix_rows, matrix_cols = map(int, raw_input().split())
for idx in range(matrix_rows):
matrix.append(list(map(int, raw_input().split())))
result = funcHopSkipJump(matrix)
print result,
if __name__ == "__main__":
main()
A set of integers arranged in rows and columns is known as a matrix (plural: "matrices") in computer science and mathematics.
What does a programming matrix mean?A set of integers arranged in rows and columns is known as a matrix (plural: "matrices") in computer science and mathematics. A matrix's numbers might be either data or mathematical formulae. They are utilised as a fast technique to approximate more difficult calculations.An algorithm is a step-by-step process that specifies a list of instructions to be carried out in a certain order in order to get the intended result. An algorithm can be implemented in more than one programming language since algorithms are often constructed irrespective of the underlying languages.Examples of everyday examples include the strategy used to solve a long division issue, how to make a cake, how to do laundry, and how a search engine works.To learn more about algorithm refer to:
https://brainly.com/question/24953880
#SPJ4
Answer:
"""
matrix, represents the elements in each cell of the matrix of size N*M.
"""
def funcHopSkipJump(matrix):
# Write your code here
return
def main():
#input for matrix
matrix = []
matrix_rows,matrix_cols = map(int, input().split())
for idx in range(matrix_rows):
matrix.append(list(map(int, input().split())))
result = funcHopSkipJump(matrix)
print(result)
if __name__ == "__main__":
main()
Explanation:
"""
matrix, represents the elements in each cell of the matrix of size N*M.
"""
def funcHopSkipJump(matrix):
# Write your code here
return
def main():
#input for matrix
matrix = []
matrix_rows,matrix_cols = map(int, input().split())
for idx in range(matrix_rows):
matrix.append(list(map(int, input().split())))
result = funcHopSkipJump(matrix)
print(result)
if __name__ == "__main__":
main()
The VECI label includes all of these EXCEPT
O California emission standard
O EPA emission standard
O engine identification
O horsepower and torque rating of the engine
The VECI label includes all of these EXCEPT Horsepower and torque rating of the engine.
What is vehicle emission control information (VECI)?The vehicle's emissions certification can be found on the vehicle emission controlinformation (VECI) label located in the vehicle's engine compartment. The VECI labelincludes emissions certification, engine family or test group, engine displacement, OBD,model year, fuel type, and catalyst information. Sample VECI labels are shown below. TheCARB certified and 50-state certified vehicles (Examples 1-3) are subject to CARB certifiedAMCC requirements.The VECI label includes emissions certification, engine family or test group, engine displacement, OBD, model year, fuel type, and catalyst information.Emission control systems limit the release of harmful gases from cars into the atmosphere. This includes hydrocarbons, carbon monoxide, and oxides of nitrogen. Engines, crankcases, fuel tanks, and carburetors are all sources of these harmful gases.
To learn more about emissions refer to:
https://brainly.com/question/15872418
#SPJ1
the design process for what became the pelican began in early 2000, when designers in the phantom works division of boeing started working on solution
Answer: to a problem faced by the military: the need for a large, long-range aircraft that could transport cargo and personnel to remote locations. The Pelican, also known as the Phantom Eye, is a high-altitude, long-endurance unmanned aerial vehicle (UAV) developed by Boeing. The design process for the Pelican began in early 2000, when designers in the Phantom Works division of Boeing started working on a solution to the military's need for a large, long-range aircraft that could transport cargo and personnel to remote locations. The Pelican is designed to fly at high altitudes, where the air is thin, and it uses liquid hydrogen as a fuel. It can fly for up to four days at a time, and it has a range of more than 2,000 miles. The Pelican was designed to be a surveillance aircraft, but it can also be used for other applications such as communications relay and atmospheric research.
Explanation:
cold vaporizers pass a current through water, evaporating it with only a small increase in temperature. one such home device is rated at 3.50 a and utilizes 120 v ac with 95.0% efficiency. (a) what is the vaporization rate in grams per minute? (b) how much water must you put into the vaporizer for 8.00 h of overnight operation
(a) The vaporization rate in grams per minute is 3090 g/min and (b) 24,720 g of water must you put into the vaporizer for 8.00 h of overnight operation.
What is vaporization?
Vaporization is the process of changing a substance from a liquid to a gas. It is a phase change that occurs when a liquid is heated to its boiling point and the molecules escape from the surface of the liquid and enter the atmosphere as a gas. Vaporization happens when a liquid absorbs energy in the form of heat, causing the molecules to move faster and further apart.
(a) The vaporization rate in grams per minute can be calculated using the formula:
Rate (g/min) = 3.50 A × 120 V × 95.0% × 60 min/hr
= 3090 g/min
(b) The amount of water that must be put into the vaporizer for 8.00 h of overnight operation can be calculated using the formula:
Water (g) = Rate (g/min) × 8.00 hrs
= 3090 g/min × 8.00 hrs
= 24,720 g
To learn more about vaporization
https://brainly.com/question/16444831
#SPJ4
1. suppose we have a stack that can grow indefinitely. we want to create a new type of stack data structure. the contents are templated and will always contain only comparable items (e.g., integers or strings, although you may not assume anything about the contents of the stack other than that any two are comparable: this means, given two elements a and b, we can determine if a < b and can also determine if a and b are equal). this new structure will have the usual stack public operations and also a new function findmin, which will return the smallest element currently in the stack. we could implement this by searching the contents, but that takes time linear in the number of elements in the stack. explain how you would change the new stack data structure to allow for this function to run in o(1) time. if you are storing additional private member data, state what else you are storing. if you are changing existing functions push, pop, or top (or the constructor/size functions), explain briefly how you are changing them. their running times must still be o(1); for example, you cannot search the full stack for the newest minimum value at every push and pop. explain in a few sentences how each change works and how, after any valid sequence of push and pop operations, we can always find the minimum element in the stack in o(1) time. your explanation should be sufficient that if, six months from now, you had to write the necessary modifications to a stack data structure written in your favorite programming language, using only your written description, you could do so. you may assume that there will never be a duplicate item pushed to the stack.
In order to accomplish operations, the stack uses the LIFO (last in, first out) sequence or methodology. Two types of data structures, an array, and a linked list, can be used to build stacks in data structures.
Array: When a stack is used, an array is used to create it. Arrays are the working tool for every action. Pushing an item into the stack and popping an item out of the stack are the only two operations permitted in pushdown stacks. It is only possible to add and delete components from a stack from the top, making it a limited-access data structure. Adding anything to the stack's top with a push, taking something away with a pop, is known as pushing.
To know more about operations,
https://brainly.com/question/27529825
#SPJ4
assess reasonableness the designers of a new amusement park want to locate the restrooms the same distance from the park's entrance, the fountain, and the food court.
Yes, this is reasonable. It would be convenient for park visitors to have access to restrooms no matter which area of the park they are visiting.
What must be included in restrooms?Restrooms must include a sink, toilet, and trash receptacle. It is also important to provide soap and paper towels or hand dryers for hand washing.
Mirrors, shelves, and a coat hook are also important to help keep the restroom tidy. Additionally, it is important to make sure the restroom is well-ventilated and has adequate lighting. It is also important to make sure the floor is slip-resistant and easy to clean.
For ADA compliance, the restroom should also include grab bars and appropriate signage. Finally, it is important to make sure the restroom is maintained regularly and kept clean and stocked with paper towels, soap, and toilet paper.
To learn more about Restrooms refer :
https://brainly.com/question/28996087
#SPJ4
all of the following are examples of projects except which? multiple choice question. designing a new product merging two companies manufacturing the daily quota reengineering a process
In general, a project is for a client. The project is a transient one. Normally, it has a clearly defined beginning and end. There will be a special set of requirements for the project that must be met within its confines. Gantt charts' principal difficulties.
Gantt charts' intricacy in larger projects is one of the main difficulties when using them. The complexity of specific activities and the amount of time required by your team to perform them may not be adequately represented by the charts. Budget and cost, time and schedule, and scope make up the factors. Any time one of these components is altered, a second one is compelled to follow. This article covers the project management triangle's theory and how to apply it to successfully manage projects, especially when there are several stakeholders involved.
To learn more about Budget it, please check:
https://brainly.com/question/8647699
#SPJ4
you are working with a database that contains invoice data about online music purchases. you are only interested in invoices sent to customers located in the city of chicago. you want to sort the invoices by order total in ascending order. the order totals are listed in the total column. you write the sql query below. add an order by clause that will sort the invoices by order total in ascending order.
SELECT
*
FROM
invoice
WHERE
billing_ cily = "Paris"'
What total appears in row 6 of your query result?
0.99
3.96
8.91
2.98
The correct answer is Oslo. Oslo is the search result in row 15. This is because the billing city column's duplicate values are removed by the DISTINCT clause, and the ORDER BY clause arranges the outcomes according to invoice ID.
The result set may be sorted in either ascending or descending order using the ORDER BY keyword. Records are typically sorted using the ORDER BY keyword in ascending order. Use the DESC keyword to sort the data in descending order. With the ORDER BY clause in the Select statement, we may arrange the results in either ascending or descending order. To discover all sequences available to the schema user, use the select sequence name from all sequences; query. Numbers can be arranged in ascending order, from least value to highest value. The arrangement is left to right.
To learn more about column's click the link below:
brainly.com/question/14744689
#SPJ4
