A number cube with faces labeled from 1 to 6 will be rolled once. The number rolled will be recorded as the outcome. Give the sample space describing all possible outcomes. Then give all of the outcomes for the event of rolling the number 1, 3, or 4. If there is more than one element in the set, separate them with commas. Sample space: {} Event of rolling the number 1 3, or 4 :

Answers

Answer 1

Answer:

Sample space: [tex]\Omega=\{1,2,3,4,5,6\}[/tex]

Event of rolling the number 1 3, or 4 : A={1,3,4}

Step-by-step explanation:

When you roll a number cube with faces labeled from 1 to 6 once.

The possible outcomes are: 1,2,3,4,5 or 6.

Therefore, the sample space of this event is:

Sample space: [tex]\Omega=\{1,2,3,4,5,6\}[/tex]

Given the event of rolling the numbers 1, 3, or 4.

Now we are required to give the outcomes for the event of rolling number 1,3 or 4.  Let's call the event A. The set of possible outcomes for A has all the numbers 1, 3 and 4 as follows

Event of rolling the number 1 3, or 4 :A= {1,3,4}


Related Questions

Suppose that a researcher is planning a new study on hemoglobin levels amongst women under 25 years old. Previous research suggest that the standard deviation of hemoglobin is 0.7 g/dl. In the new study the research wants to have the standard error for the sample mean to be no more than 0.05 g/dl. Find the required sample size for the new study.

Answers

Answer:

A sample size of at least 531 is required.

Step-by-step explanation:

We are lacking the confidence level to solve this question, so i am going to use a 90% confidence level.

We have that to find our [tex]\alpha[/tex] level, that is the subtraction of 1 by the confidence interval divided by 2. So:

[tex]\alpha = \frac{1-0.9}{2} = 0.05[/tex]

Now, we have to find z in the Ztable as such z has a pvalue of [tex]1-\alpha[/tex].

So it is z with a pvalue of [tex]1-0.05 = 0.95[/tex], so [tex]z = 1.645[/tex]

Now, find the margin of error M as such

[tex]M = z*\frac{\sigma}{\sqrt{n}}[/tex]

In which [tex]\sigma[/tex] is the standard deviation of the population and n is the size of the sample.

Find the required sample size for the new study.

A sample size of at least n is required.

n is found when [tex]M = 0.05[/tex]

We have that [tex]\sigma = 0.7[/tex]

So

[tex]M = z*\frac{\sigma}{\sqrt{n}}[/tex]

[tex]0.05 = 1.645*\frac{0.7}{\sqrt{n}}[/tex]

[tex]0.05\sqrt{n} = 1.645*0.7[/tex]

[tex]\sqrt{n} = \frac{1.645*0.7}{0.05}[/tex]

[tex](\sqrt{n})^{2} = (\frac{1.645*0.7}{0.05})^{2}[/tex]

[tex]n = 530.4[/tex]

Rounding up

A sample size of at least 531 is required.

The population of bats in a large cave is 7000 and is growing exponentially at 14% per year. Write a function to represent the population of bats after
tt
t years, where the monthly rate of change can be found from a constant in the function.

Answers

Answer:

y=7000+14^t

Step-by-step explanation:

This equation shows that the original population of bats was 7000 and grows exponentially at a rate of 14% per year.

I put the graph below so you can see it.

In this exercise we have to identify how to write an exponential function from the data informed in the text, in this way we find that:

[tex]y=7000+14^t[/tex]

From the information given in the statement we find that:

The original population of bats was 7000Rate of 14% per year.

Then writing this function as:

[tex]y=7000+14^t[/tex]

See more about function at brainly.com/question/5245372

Will give Brainliest Talia took the bus from her home to the bank and then walked back to her home along the same route. The round trip took 0.9 hours total. The bus traveled at an average speed of 40 km/h and she walked at an average speed of 5 km/h. The rate of Trip 2 is blank km/h. The time of Trip 1 is blank hours.

Answers

Answer:

The rate of trip 2 is 5 km/h

The time of trip 1 is 0.9-x

Step-by-step explanation:

The rate of trip 2 is 5 km/h because it tells you she walked at an avg speed of 5 km/h.

The time of trip 1 is 0.9-x. It's because the time in trip 2 is x, and it says the total is 0.9. So just subtract 0.9-x.

Also I took the test on edge and attached a pic.

The web publisher www.exploreiceland.is (Links to an external site.)Links to an external site. provides information on traveling to Iceland. Access to the website is free but revenues are generated by selling ads that are posted on the website. In the following month, the website has committed to displaying ads to 650,000 viewers, i.e., 650,000 impressions. Based on data from previous months the traffic to the website is estimated to be normally distributed with a mean of 850,000 viewers and a standard deviation of 150,000.

How many impressions should the web publisher have taken on, to be able to guarantee a 95% service level?

Answers

Answer:

1096750 impressions

Step-by-step explanation:

Given that :

Mean = 850,000

Standard deviation = 150,000

If we assume that X should be the numbers of impressions created;

Then ;

[tex]X \approx N (\mu , \sigma^2)[/tex]

Now ; representing x as the value for the number of impression needed ; Then ;

[tex]P(X>x) = 0.95[/tex]

[tex]P(\dfrac{X- \mu}{\sigma} > \dfrac{x -850000}{150000}) = 0.95[/tex]

[tex]P(Z> \dfrac{ x -850000}{150000}) = 0.95[/tex]

From normal tables:

[tex]P(Z >1.645) = 0.95[/tex]

[tex]\dfrac{x - 850000}{150000} =1.645[/tex]

(x- 850000) = 1.645(150000)

x - 850000 = 246750

x = 246750 + 850000

x = 1096750 impressions

Can someone please help me with this I’m stuck and I need to finish but I don’t understand

Answers

Answer:

28

Step-by-step explanation:

Because the lines are parallel:

[tex]\dfrac{m}{21}=\dfrac{8}{6} \\\\m=\dfrac{8}{6}\cdot 21=28[/tex]

Hope this helps!

(02.04 MC) Choose the equation that represents the line passing through the point (2, - 5) with a slope of −3. y = −3x − 13 y = −3x + 11 y = −3x + 13 y = −3x + 1

Answers

Answer:

it is b

Step-by-step explanation:

the answer is b because

tank contains 20002000 liters​ (L) of a solution consisting of 112112 kg of salt dissolved in water. Pure water is pumped into the tank at the rate of 1212 ​L/s, and the mixturelong dash—kept uniform by stirringlong dash—is pumped out at the same rate. How long will it be until only 88 kg of salt remains in the​ tank?

Answers

The time taken in draining salt so that only 88 kg of salt remains in tank will be 35.71 sec.

It is given that a tank contains 2000 liters of a solution consisting 112 kg of salt is dissolved in water. Pure water is then pumped at rate of 12 L/sec.

We have to find out that how long it will take to drain out salt such that only 88kg of salt remains in tank.

What will be the amount of water flow ; if a water flows for 4 hours at constant speed of 120 liter /hour ?

The amount of water flow will be 120 liter / hour × 4 hour or 120 × 4 liter or 480 liters.

As per the question ;

In 2000 liters solution there is 112 kg salt.

The pumping speed of water into tank = 12 L/s

The salt pumping per second will be ;

= ( 12L/s × 112kg salt ) / 2000 L

= 0.672 Kg salt/sec

This means that 0.672 kg per second salt comes out .

It should be found that the amount of salt that must be drained so that only 88 kg of salt remain.

So , the amount of salt drained out will be ; (x kg)

112kg salt - x kg salt = 88 kg salt

⇒ x kg salt = 112 - 88

x kg salt = 24 kg

The time taken until only 88 kg of salt remains in the​ tank will be ;

= 24 / 0.672

= 35.71 sec

Thus , the time taken in draining salt so that only 88 kg of salt remains in tank will be 35.71 sec.

To learn more about time and rate click here ;

https://brainly.com/question/3581191

#SPJ2

The following crosstabulation summarizes the data for two categorical variables, x and y. The variable x can take on values low, medium, or high and the variable y can take on values yes or no.
Y
X Yes No Total
Low 20 10 30
Medium 15 35 50
High 20 5 25
Total 55 50 105
1. Compute the row percentage
2. Construct a sketch percentage of frequency bar chat with x on horozontal axis.

Answers

Answer:

Step-by-step explanation:

From the given data:

The row percentage can be determined by: taking each box in each row and by dividing it with its total on that line, after that we will multiply it by 100 to get the result of it's equivalent percentage.

Table reconstruct the table from the question ; we have:

                y                

x              Yes          No              Total

Low           20         10                  30

Medium     15          35                 50

High           20           5                  25

Total          55           50                105

For Low; the total on the row is 30 ;

so for Yes: we have 20/30 × 100 = 66.7

for No ; we have 10/30 × 100 = 33.3

For Medium ; the total on the row is 50 ;

so for Yes: we have 15/50 × 100 = 30

for No ; we have 35/50 × 100 = 70

For High  ; the total on the row is 25;

so for Yes: we have 20/25 × 100 = 80

for No ; we have 5/25 × 100 = 20

                y                

x              Yes          No              Total

Low           66.7     33.3                100

Medium     30        70                  100

High           80       20                   100

b. The construction of a sketch percentage of the frequency bar chat with x on horizontal axis is shown in the attached file below.

A population of protozoa develops with a constant relative growth rate of 0.7781 per member per day. On day zero the population consists of six members. Find the population size after four days. (Round your answer to the nearest whole number.) P(4)

Answers

Answer:

[tex] P(t) = A (1+r)^t [/tex]

Where P represent the population after t days. a the initial amount on this case 6 and r the growth factor rate of 0.7781. so then our model would be given by:

[tex] P(t)= 6(1.7781)^t [/tex]

And replacing t=4 we got:

[tex] P(4) = 6(1.7781)^4 =59.975 \approx 60[/tex]

So then after 4 days we would expect about 60 protzoa

Step-by-step explanation:

For this case we can use the following function to model the population of protzoa:

[tex] P(t) = A (1+r)^t [/tex]

Where P represent the population after t days. a the initial amount on this case 6 and r the growth factor rate of 0.7781. so then our model would be given by:

[tex] P(t)= 6(1.7781)^t [/tex]

And replacing t=4 we got:

[tex] P(4) = 6(1.7781)^4 =59.975 \approx 60[/tex]

So then after 4 days we would expect about 60 protzoa

I NEED HELP PLEASE SOMEONE HELP ME

Answers

Answer:

2nd option is the correct answer

Step-by-step explanation:

3 times a number decreased by 6 is - 2

I NEED HELP PLEASE HELP ME

Answers

Answer:

3

Step-by-step explanation:

Solving the inequality

2x-1>=5

2x>=6

x>=3

The graph should have a shaded circle on 3 and a line pointing to values increasing.

It’s question number 3 because the slope is 2

Given AB intersects DE at point C. prove: DCB = ECA. What is the missing reason in step 5

Answers

Answer: the answer is linear pair

Step-by-step explanation:

Answer:

Linear pair postulate

Step-by-step explanation:

What is the value of X ? A-17 B-26 C-39 D-41

Answers

Answer:

D.

Step-by-step explanation:

It's a right triangle so

[tex]x^2=40^2+9^2[/tex]

x = 41

In a completely randomized design involving three treatments, the following information is provided: Treatment 1 Treatment 2 Treatment 3 Sample Size 5 10 5 Sample Mean 4 8 9 The overall mean for all the treatments is a. 7.00 b. 6.67 c. 7.25 d. 4.89

Answers

Answer:

c. 7.25

Step-by-step explanation:

Given the following information from an experiment:

[tex]\left\begin{array}{ccc}&$Sample Size&$Sample Mean \\$Treatment 1&5&4\\$Treatment 2&10&8\\$Treatment 3&5&9\end{array}\right[/tex]

Total Sample Size =5+10+5=20

Therefore, the overall mean

[tex]=\dfrac{(5 \times 4)+ (10 \times 8) + (5 \times 9)}{20} \\=\dfrac{145}{20}\\\\=7.25[/tex]

A university warehouse has received a shipment of 25 printers, of which 10 are laser printers and 15 are inkjet models. If 6 of these 25 are selected at random to be checked by a particular technician, what is the probability that exactly 3 of those selected are laser printers (so that the other 3 are inkjets)

Answers

Answer:

The probability is 0.31

Step-by-step explanation:

To find the probability, we will consider the following approach. Given a particular outcome, and considering that each outcome is equally likely, we can calculate the probability by simply counting the number of ways we get the desired outcome and divide it by the total number of outcomes.

In this case, the event of interest is  choosing 3 laser printers and 3 inkjets. At first, we have a total of 25 printers and we will be choosing 6 printers at random. The total number of ways in which we can choose 6 elements out of 25 is [tex]\binom{25}{6}[/tex], where [tex]\binom{n}{k} = \frac{n!}{(n-k)!k!}[/tex]. We have that [tex]\binom{25}{6} = 177100[/tex]

Now, we will calculate the number of ways to which we obtain the desired event. We will be choosing 3 laser printers and 3 inkjets. So the total number of ways this can happen is the multiplication of the number of ways we can choose 3 printers out of 10 (for the laser printers) times the number of ways of choosing 3 printers out of 15 (for the inkjets). So, in this case, the event can be obtained in [tex]\binom{10}{3}\cdot \binom{15}{3} = 54600[/tex]

So the probability of having 3 laser printers and 3 inkjets is given by

[tex] \frac{54600}{177100} = \frac{78}{253} = 0.31[/tex]

If theta=3pi/4

Sin theta=?
Cos theta=?

Answers

Answer:

For ease of writing, θ [tex]=x[/tex]

[tex]sin(x)=\frac{1}{\sqrt{2} }[/tex]

[tex]cos(x)=-\frac{1}{\sqrt{2} }[/tex]

Step-by-step explanation:

Our angle is [tex]x=\frac{3\pi }{4}[/tex]

To find our answers for [tex]sin(\frac{3\pi}{4} )[/tex] and [tex]cos(\frac{3\pi}{4} )[/tex], we will need to use a unit circle. (I have attached the image of one).

Recall that the [tex]sin[/tex] of an angle is equal to the y-value of the corresponding ordered pair.

And the [tex]cos[/tex] of an angle is equal to the x-value of the corresponding ordered pair.

For the angle [tex]x=\frac{3\pi }{4}[/tex], the ordered pair is [tex](-\frac{1}{\sqrt{2}} }, \frac{1}{\sqrt{2} } )[/tex]

This means that

[tex]sin(x)=\frac{1}{\sqrt{2} }[/tex]

[tex]cos(x)=-\frac{1}{\sqrt{2} }[/tex]

There are 20 pieces of fruit in a bowl and 5 of them are apples. What percent of the fruit are apples?

Answers

Step-by-step explanation:

20fruits=100%

5fruits=?

5x100/20 5fruitsx5%

=24%

The graph of g(x) = ax^2 opens downward and is narrower than the graph of f(x) = x^2. Which of the following could be the value of a?

Answers

The value of a should be less than -1.

Equation of parabola,

The equation of a parabola is given by the following function,

[tex]y=f(x)=\pm a(x-h)^2+k[/tex]

where,

(h, k) denotes the coordinates of its vertex,

a defines how narrower is the parabola, and the "-" or "+" that the parabola will open up or down.

Given to us,

[tex]f(x) = x^2[/tex]

[tex]g(x)=ax^2[/tex]

Solution

For the parabola,g(x) to be narrower than the parabola f(x) the value of a should be less than 1. also for the parabola to open downward the value of a is needed to be negative.

Hence, the value of a should be less than -1.

Learn more about Equation of parabola:

https://brainly.com/question/4443998

1. What is the approximate area of a circle with a diameter of 20 inches?

2. What is the volume of a cube with a side length of 3 cm?

3. What is the median of the data set { 35,20, 30,25,20 }?

Answers

Answer:

1. 100[tex]\pi[/tex]

2. 27 [tex]cm^{3}[/tex]

3. 30

Step-by-step explanation:

Area = [tex]\pi[/tex][tex]r^{2}[/tex]

       = [tex]\pi[/tex] x [tex]10x^{2}[/tex]

       = 100[tex]\pi[/tex]

Volume = l x w x h

             = 3 x 3 x 3

             = 27

The sum of two fractions can always be written as a

Answers

Answer: decimal

Step-by-step explanation:

because i did this quiz

Describe the rate of change of f(x)=lnx. Your answer should explain how the slope changes when x is small and when x is large.

Answers

Answer:

By plotting the graph of f(x)=lnx, you can conclude that when x is small, dy/dx has a larger value. For instance, the gradient of the curve when x=0.5 is 2. However, as you move along the x axis, you will see that the graph levels off, indicating a decrease in the slope, or dy/dx. For example, if x=10, dy/dx = 0.1 and when x=20, dy/dx= 0.05 and so on. Eventually, when x is large enough the value of dy/dx will be negligible.

Thus, as x increases, the slope decreases.

Answer:

Explanation shown below

Step-by-step explanation:

f(x)=lnx;

The rate of change is defined as dy/dx;

dy/dx[Inx] = 1/x

and dy/dx is defined as the slope

The nature of the slope is as x increases ; the slope decreases and conversely meaning as x decreases, the slope increases.

A hose fills a hot tub at a rate of 3.84 gallons per minute. How many hours will it take to fill a 305​-gallon hot​ tub?

Answers

Answer:

1.56 hours

Step-by-step explanation:

300 gal × 1 min 3.2 gal × 1 hr 60 min = 1.56 hr.

Answer:

i thought the question said a 'HORSE' fills a hot tub...

Step-by-step explanation:

lol dont mind me i just want points :D

I don’t need you to explain just answer.

Answers

Answer: The answer is (x-5)^2

Angle 6= (11x+8) and angle 7=(12x-4) what is the measure of angle 4

Answers

Answer:

Answer is m∠4=40

Step-by-step explanation:

take note that m∠6 & m∠7 are vertical angles. Vertical angles are equal to each other, therefore m∠6 is equal to m∠7.

m∠6 = m∠7 (vertical angles)

11x + 8 = 12x – 4

12x - 11x = 8 + 4

x = 12

so

m∠6 = 11x + 8  

m∠6 = 11(12) + 8

m∠6 = 132 + 8

m∠6 = 140

m∠4 = 180 - m<6

m∠4 = 180 - 140

m∠4 = 40

Answer:

A

Step-by-step explanation: Took test

Please help! I don’t get what I’m supposed to put in those boxes

Answers

The volume of any cylinder is

V = pi*r^2*h

where r is the radius and h is the height. We are keeping r = 2 the same the entire time, as the first part of the instructions indicate. In contrast, h is allowed to vary or change based on the values shown in the table.

If h = 1, then,

V = pi*r^2*h

V = pi*2^2*1

V = pi*4

V = 4pi

So you'll write "4pi", without quotes of course, in the V column next to h = 1. This first row shows a height of 1 leads to a volume of 4pi.

-------------

Then if h = 2, we have,

V = pi*r^2*h

V = pi*2^2*2

V = pi*8

V = 8pi  ... this is written in the second box

and finally if h = 3, we would say,

V = pi*r^2*h

V = pi*2^2*3

V = pi*12

V = 12pi .... and this is placed in the third box

---------------

The values of V we got were: 4pi, 8pi, 12pi

This is for h = 1,2 and 3 respectively in that order.

The sequence 4,8,12 is linear because we are adding 4 each time. More specifically, it fits the equation y = 4x where x = 1,2,3. Think of y = 4x as y = 4x+0 and that fits the slope intercept form y = mx+b.


Here are three number cards.
The numbers are hidden.
?
?
?
The mode of the three numbers is 7.
The highest number is not 7.
The range is 4.
What are the three numbers? Write them in the boxes, from smallest to larges
O
INN​

Answers

Answer:

7, 7, 11 are the three numbers.

Step-by-step explanation:

Given:

Mode of the three numbers = 7

Range of numbers i.e. difference between the smallest and the largest number is = 4

Value of highest number card [tex]\neq[/tex] 7

As per the definition of Mode:

Mode is the number that occurs the most number of times in the given set of numbers. In other words, mode is the number whose frequency is the highest in the given set of numbers.

Here, we have three numbers and mode is 7 that means 7 occurs at least  two times in the three numbers.

Also, we are given that 7 is not highest number, plus 4 is the range that means 7 occurs exactly two times out of three numbers.

So, two numbers are 7 and 7.

7 is not highest and 4 is the range, so third number = 7+4 = 11

So, the numbers on the cards are 7, 7 and 11.

g Question 6 1 pts A 3x3 matrix with real entries can have (select ALL that apply) Group of answer choices three eigenvalues, all of them real. three eigenvalues, all of them complex. two real eigenvalues and one complex eigenvalue. one real eigenvalue and two complex eigenvalues. only two eigenvalues, both of them real. only two eigenvalues, both of them complex. only one eigenvalue -- a real one. only one eigenvalue -- a complex one.

Answers

Answer:

(A)three eigenvalues, all of them real.

(D)one real eigenvalue and two complex eigenvalues.

(G)only one eigenvalue -- a real one.

Step-by-step explanation:

Given an [tex]n \times n[/tex] matrix, the characteristic polynomial of the matrix is the degree n  polynomial in one variable λ:

[tex]p(\lambda) = det(\lambda I- A)[/tex]

If such [tex]n \times n[/tex] matrix A has real entries, its complex eigenvalues  will always occur in complex conjugate pairs.

Therefore, for a [tex]3 \times 3[/tex] matrix with real entries, the following are possible:

(A)three eigenvalues, all of them real.

(D)one real eigenvalue and two complex eigenvalues.

(G)only one eigenvalue -- a real one.

A [tex]3 \times 3[/tex] matrix with real entries cannot have the following:

(B)three eigenvalues, all of them complex.

(C)two real eigenvalues and one complex eigenvalue.

(E)only two eigenvalues, both of them real.

(F)only two eigenvalues, both of them complex.

(H)only one eigenvalue -- a complex one.

Mario’s Restaurant is planning to tile the floor of their outdoor dining area, represented by the composite figure below. The tile costs $1.50 per square foot. How much should the restaurant plan to spend on tile to complete the job?

Answers

Answer:

Cost of tiling the floor of the restaurant = $346.5

Step-by-step explanation:

Since Mario's restaurant is in the shape of a composite figure.

Area of the composite figure = Area of the rectangle + Area of trapezoid

Area of the rectangle = 3 × 9

                                    = 27 square feet

Area of the trapezoid = [tex]\frac{1}{2}(b_{1}+b_{2}).h[/tex]

Here [tex]b_{1}[/tex] and [tex]b_{2}[/tex] are the parallel sides of the trapezoid and 'h' is the distance between these sides.

Area of the trapezoid = [tex]\frac{1}{2}[12+(31-9)]\times 12[/tex]

                                    = 17 × 12

                                    = 204 square feet

Total area of the floor = 27 + 204

                                     = 231 square feet

Cost of the tiles = $1.5 per square feet

Total Cost of tiling the floor of Mario's restaurant will be,

= per square feet cost × Area of the floor

= 1.50 × 231

= $346.5

Answer:

THE ANSWER IS .B  346.50

Step-by-step explanation:

For a​ long-distance person-to-person telephone​ call, a telephone company charges $ 0.72 for the first​ minute, $ 0.42 for each additional​ minute, and a $ 1.85 service charge. If the cost of a call is $ 8.03 comma how long did the person​ talk?

Answers

Answer:

13 mins

Step-by-step explanation:

8.03- 1.85= 6.18

-.72=5.46

/.42=13

A construction company has to complete a project no later than 4 months from now or there will be significant cost overruns. The manager of the construction company believes that there are four possible values for the random variable X, the number of months from now it will take to complete this project: 2, 2.5, 3, and 3.5. It is currently believed that the probabilities of these four possibilities are .4, .3, .2, and .1, respectively. What is the expected completion time (in months) of this project from now?

Answers

Answer:

The expected completion time of this project from now is 2.5 months.

Step-by-step explanation:

To find the expected completion time for the project, we multiply each projection by it's probability.

We have that:

0.4 = 40% probability it takes 2 months to complete the project.

0.3 = 30% probability that it takes 2.5 months to complete the project.

0.2 = 20% probability it takes 3 months to complete the project.

0.1 = 10% probability it takes 3.5 months to complete the project.

What is the expected completion time (in months) of this project from now?

E = 0.4*2 + 0.3*2.5 + 0.2*3 + 0.1*3.5 = 2.5

The expected completion time of this project from now is 2.5 months.

Other Questions
Theforce between each planet and the Sun keeps the planets in orbit around the Sun.A. frictionalB.nuclearC. gravitationalD. magnetic Which table represents a linear function? A 1.70 m tall woman stands 5.00 m in front of a camera with a 50.00 cm focallength lens. Calculate the size of the image formed on flim Consider the following data for two products of Gitano Manufacturing. (Loss amounts should be indicated with a minus sign. Round your intermediate calculations and "OH rate and cost per unit" answers to 2 decimal places.) Product A Product BNumber of units produced 11,500 units 1.700 unitsDirect labor cost ($29 per DLH) 0.16 DLH per unit 0.24 DLH per unitDirect materials cost $2.10 per unit $3.10 per unitActivity Overhead costsMachine setup $94,104Materials handling 53,000Quality control inspections 73.200 $220,304Requireda. Using direct labor hours as the basis for assigning overhoad costs, determine the total production cost per unit for each product line.b. If the market price for Product A is $28.68 and the market price for Product B is $58, determine the profit or loss per unit for each.c. Consider the following additional information about these two product lines. If ABC is used for assigning overhead costs to what is the cost per unit for Product A and for Product B? 2)How do you think most Africans felt about being ruled by European countries Why do you think the boss never went to see his sons grave? The FLY by Katherine Mansfield PLEASE HELP ME OUT PLEASE PLEASE IT WOULD BE HELPFUL THANK YOU What role did the Muslim league play in the movement for independence in India An object is moving east, and its velocity changes from 65 m/s to 25 m/s in 10 seconds. Which describes the acceleration?84 m/s2 in negative acceleration4 m/s2 in positive acceleration9 m/s2 in positive acceleration9 m/s in negative accelerationSave and ExitNextSEDMark this and return 6. What is the slope of a line perpendicular to the line whose equation is y = 2x -5?*1) -22) 23) 1/24) -1/2 Solve this inequality.8x + 6 less than or equel to 54 What is not a good technique to use when photographing groups?A-Stay as far away as possible.B-Have someone help you.C-Use a tripod.D-Take more than one photograph. What are ""O Dubinushka"" and ""Tortured and Enslaved""? If f(x) = 3x - 2 and g(x) = 2x + 1, find (f+ g(x).O A. 5x-3O B. x-1O c. x-3O D. 5x-1SUBMITPlzzz helpp In his Gettysburg Address, Lincoln said that the war was fought so that "Government of the people, by the people, for the people shall not perish from the Earth." How does this statement reflect the ideals of equality, liberty, and unity of the Founding Fathers? What party did the Grange evolve into According to this article, what were the consequences of the migration of African Americans to Newark? What evidence does it offer to support its claims? The following is a description of the conversion cycle of Central Production Limited:The conversion cycle of the company is triggered by a report from the warehouse. When the quantity of an inventory item falls below a pre-set minimum level, the warehouse manager sends an online inventory status report to production department advising them to schedule a production batch run for the item.Upon receipt of the report, the production clerk assesses the digital bill of materials and the route sheet files for the item to be produced and adds the production details to the online production schedule.The system automatically adds a record to the open work order file and sends an online work order to the work centre supervisors computer and to the accounting clerks computer.The work centre supervisor receives the work order from his computer and print hard-copy move tickets and materials requisitions for each production process. Production employees take the materials requisitions to store clerk and receives the materials and subassemblies needed to perform the production tasks. If additional materials beyond the standard amount is needed, the work centre supervisor prepares additional materials requisitions.Production employees complete job time tickets after completing a production process to record the time spent on the job. The job time tickets are then sent together with the move tickets to the accounting department.After releasing the materials into production, the store clerk updates the material inventory records and send the materials requisitions to accounting department. The clerk prepares a journal voucher and posts to the general ledger material control account at the end of each day.The accounting clerk assesses the work orders and set up a work-in-process account for a production batch. Throughout the production period, the clerk also receives move tickets, job tickets, and materials requisitions, which he uses to post to the work-in-process account. At the end of each day, the accounting clerk prepares a digital journal voucher and post it to the general ledger work-in- process and finished goods control accounts.Identify the risks exist in the conversion cycle of Central Production Limited. (10 marks, maximum 300 words) A level in an energy pyramid is called a _______ level Using the data in the table, use the exponential smoothing method with alpha=0.5 and a February forecast of 500 to forecastsales for MayMonth DemandJanuary 480February 520March 535April 550May 590June 630