The position vector r(t) of the particle at time t is:
r(t) = 3t^2 i + (2/3)t^3 j
To determine the position vector r(t) of the particle at time t, we can integrate the velocity vector to obtain the position vector.
Initial position: r(0) = (x(0), y(0)) = (0, 0)
Velocity vector: v(t) = dx/dt i + dy/dt j = (6t)i + (2t^2)j
Integrating the velocity vector with respect to time, we get:
r(t) = ∫ v(t) dt = ∫ (6t)i + (2t^2)j dt
Integrating the x-component:
∫ 6t dt = 3t^2 + C1
Integrating the y-component:
∫ 2t^2 dt = (2/3)t^3 + C2
So the position vector r(t) is given by:
r(t) = (3t^2 + C1)i + ((2/3)t^3 + C2)j
Now, we need to determine the constants C1 and C2 using the initial conditions.
Given that r(0) = (0, 0), we substitute t = 0 into the position vector:
r(0) = (3(0)^2 + C1)i + ((2/3)(0)^3 + C2)j = (0, 0)
This implies C1 = 0 and C2 = 0.
Therefore, the position vector r(t) of the particle at time t is:
r(t) = 3t^2 i + (2/3)t^3 j
Learn more about Integration here
https://brainly.com/question/31744185
#SPJ11
A continuous DV and one discrete IV with 2 levels. Two groups that each get one level. B. A continuous DV and one discrete IV with 3 or more levels. C. All of your variables are discrete. D. A DV and an IV that are both continuous. E. A continuous DV and two or more discrete IVs. F. A continuous DV and one discrete IV with 2 levels. One group that gets both levels.
In this experimental design, there is a continuous DV and a discrete IV with two levels. However, there is only one group that receives both levels of the IV. An example would be measuring the effect of caffeine on reaction time. Participants would be given both a caffeinated and non-caffeinated drink and their reaction time would be measured. This design is useful when it is not feasible to have two separate groups.
In the context of experiments, it is important to categorize your variables into discrete and continuous types.
Here are examples of experimental designs for various types of variables: A continuous DV and one discrete IV with 2 levels. Two groups that each get one level.
In this experimental design, you have a dependent variable (DV) that is measured continuously and an independent variable (IV) that is measured discretely with two levels. Two groups are randomly assigned to each level of the IV. For example, the DV could be blood pressure and the IV could be medication dosage. Two groups would be assigned, one receiving a high dosage and one receiving a low dosage.
A continuous DV and one discrete IV with 3 or more levels. Similar to the previous design, this design has a continuous DV and a discrete IV. However, the IV has three or more levels. An example would be the IV being a type of treatment (e.g. medication, therapy, exercise) and the DV being blood sugar levels.
The levels of the IV would be assigned randomly to different groups.All of your variables are discrete. In this experimental design, all variables are discrete. An example would be testing the effectiveness of different types of advertising (TV, social media, print) on customer purchases. The variables could be measured using discrete categories such as "yes" or "no" or using a Likert scale (e.g. strongly agree to strongly disagree).DV and an IV that are both continuous.
In this experimental design, both the dependent and independent variables are continuous. An example would be measuring the relationship between hours of sleep and reaction time. Participants' hours of sleep would be measured continuously, and reaction time would also be measured continuously.
A continuous DV and two or more discrete IVs. In this experimental design, there is one continuous DV and two or more discrete IVs. For example, an experiment could measure the effect of different types of music on productivity. The IVs could be genre of music (classical, pop, jazz) and tempo (slow, medium, fast).Continuous DV and one discrete IV with 2 levels. One group that gets both levels.
Learn more about: discrete
https://brainly.com/question/30565766
#SPJ11
(a) Define: (i) arc length of a curve (ii) surface integral of a vector function (b) Using part (i), show that the arc length of the curve r(t)=3ti+(3t^2+2)j+4t^3/2k from t=0 to t=1 is 6
(a) Definitions:
(i) Arc Length of a Curve: The arc length of a curve represents the length of the curve between two given points. It is a measure of the total distance traveled along the curve. Mathematically, the arc length of a curve defined by a vector function r(t) from t=a to t=b is given by the integral:
L = ∫[a to b] ∥r'(t)∥ dt
where r'(t) is the derivative of the vector function r(t) with respect to t, and ∥r'(t)∥ represents the magnitude of the derivative vector.
(ii) Surface Integral of a Vector Function: The surface integral of a vector function represents the flux of the vector field through a surface. It calculates the flow of the vector field across the surface in a specified direction. Mathematically, the surface integral of a vector function F over a surface S is given by:
∬S F · dS
where F is the vector function, · represents the dot product, and dS is the vector representing a differential area element on the surface S.
(b) Calculation of Arc Length:
To calculate the arc length of the curve r(t) = 3ti + (3t^2 + 2)j + (4t^(3/2))k from t=0 to t=1, we need to find the derivative of r(t) and calculate its magnitude.
First, let's find the derivative of r(t):
r'(t) = 3i + (6t)j + (6t^(1/2))k
Next, calculate the magnitude of r'(t):
∥r'(t)∥ = √(3^2 + (6t)^2 + (6t^(1/2))^2)
= √(9 + 36t^2 + 36t)
Now, we can calculate the arc length L by integrating ∥r'(t)∥ from t=0 to t=1:
L = ∫[0 to 1] √(9 + 36t^2 + 36t) dt
Evaluating this integral will give us the arc length of the curve from t=0 to t=1. In this case, it is given that the arc length is 6, so we can confirm the result by evaluating the integral.
Please note that calculating the integral explicitly may require numerical methods or the use of software tools.
Learn more about vector function here:
https://brainly.com/question/3206885
#SPJ11
The owner of a paddle board rental company wants a daily summary of the total hours paddle boards were rented and the total amount collected. There is a minimum charge of $35 for up to 2 hours. Then an additional $10 for every hour over two hours but the maximum charge for the day is $75. The maximum number of hours a board can be rented for a day is 10.
The user enters a -1 when they are finished entering data. When a -1 is entered display the total number of paddle boards, total number of hours and total boards rented. For example
If the number of hours input is not a valid numeric value or within the range display an error and repeat the question. Any number 0-10 is accepted any letter or number that isn't in range asks for a repeat.
Three functions that i need help with
Get valid input
Calculate charge
Display summary
The get valid input function prompts the user for the number of hours a paddle board was rented for. If the user enters a valid number of hours (between 0 and 10 inclusive), the function returns the number of hours as a float.
If the user enters a value that is not a valid numeric value or not within the range, the function displays an error and prompts the user to try again. This function is called by the main program until a valid input is received.
def get_valid_input():
while True:
try:
hours = float(input("Enter the number of hours the paddle board was rented for (0-10): "))
if hours < 0 or hours > 10:
print("Error: Input out of range. Please try again.")
else:
return hours
except ValueError:
print("Error: Invalid input. Please enter a number.")
Calculate Charge Function
The calculate charge function takes the number of hours a paddle board was rented for as input and returns the total charge for that rental. The minimum charge is $35 for up to 2 hours, and then an additional $10 is added for every hour over two hours. The maximum charge for the day is $75.
def calculate_charge(hours):
if hours <= 2:
return 35
elif hours > 2 and hours <= 10:
return min(75, 35 + (hours - 2) * 10)
else:
return 75
Display Summary Function
The display summary function takes three input parameters: total_number_of_boards, total_number_of_hours, and total_charge. It then displays a summary of the total number of boards rented, the total number of hours rented, and the total charge collected for the day.
def display_summary(total_number_of_boards, total_number_of_hours, total_charge):
print("Total number of paddle boards rented: ", total_number_of_boards)
print("Total number of hours rented: ", total_number_of_hours)
print("Total amount collected: $", total_charge).
To know more about function visit:
https://brainly.com/question/30012972
#SPJ11
Use 2-dimensional array to allow five students 4 different payments to enter their boarding fees. If they live on Wedderburn Hall, they paid $2,500 for boarding if they live on Val Hall they pay $5,000 for boarding and V hall they pay $6,000 for boarding board. Use a function called total remaining fees to output if they have paid all their total fees
A 2-dimensional array is used to store the boarding fees of five students for four different payments. A function called "total remaining fees" calculates the remaining fees for each student and determines if they have paid all their fees based on the sum of their paid fees compared to the total fees.
To solve this problem, we can use a 2-dimensional array to store the boarding fees of five students for four different payments.
Each row of the array represents a student, and each column represents a payment. The array will have a dimension of 5x4.
Here's an example implementation in Python:
#python
def total_remaining_fees(fees):
total_fees = [2500, 5000, 6000] # Boarding fees for Wedderburn Hall, Val Hall, and V Hall
for student_fees in fees:
remaining_fees = sum(total_fees) - sum(student_fees)
if remaining_fees == 0:
print("Student has paid all their fees.")
else:
print("Student has remaining fees of $" + str(remaining_fees))
# Example usage
boarding_fees = [
[2500, 2500, 2500, 2500], # Fees for student 1
[5000, 5000, 5000, 5000], # Fees for student 2
[6000, 6000, 6000, 6000], # Fees for student 3
[2500, 5000, 2500, 5000], # Fees for student 4
[6000, 5000, 2500, 6000] # Fees for student 5
]
total_remaining_fees(boarding_fees)
In this code, the `total_remaining_fees` function takes the 2-dimensional array `fees` as input. It calculates the remaining fees for each student by subtracting the sum of their paid fees from the sum of the total fees.
If the remaining fees are zero, it indicates that the student has paid all their fees.
Otherwise, it outputs the amount of remaining fees. The code provides an example of a 5x4 array with fees for five students and four payments.
To know more about array refer here:
https://brainly.com/question/26104158#
#SPJ11
leticia simplified an expression. her work is shown below. 4.5 divided by one-fourth 2 and one-half minus 0.75 times 8 step 1 18 2 and one-half minus 0.75 times 8 step 2 18 1.75 times 8 step 3 18 14 step 4 32 where did leticia make her first mistake? step 1 step 2 step 3 step 4
Leticia made her mistake of calculation in step 3.
According to the given information proceed with the steps:
Step 1: 4.5 divided by one-fourth is equivalent to multiplying 4.5 by the reciprocal of one-fourth, which is 4.
Therefore, we have 4.5 x 4 = 18.
Step 2: 2 and one-half minus 0.75 times 8. First, let's calculate 0.75 times 8, which is 6.
Subtracting 6 from 2 and one-half gives us 2 - 6 = -4.
Step 3: In this step, Leticia made her mistake. Instead of subtracting 6 from 2 and one-half, she subtracted it from the result of Step 1, which is 18. So, the mistake is in Step 3.
Step 4: Continuing from the incorrect result in Step 3, subtracting 6 from 18 gives us 18 - 6 = 12.
Learn more about subtraction visit:
https://brainly.com/question/17301989
#SPJ4
Question 6 Attempt 1
Use three iterations of the secant method to find an approximate solution of the equation
sin(1.3) 2-5
if your initial estimates are x = 4.90 and x₁ = 5.10
Maintain at least eight digits throughout all your calculations.
When entering your final result you MAY round your estimate to five decimal digit accuracy. For example 1.67353
Therefore, after three iterations of the secant method, the approximate solution to the equation sin(1.3)x^2 - 5 = 0, with initial estimates x = 4.90 and x₁ = 5.10, is x ≈ 5.09464 (rounded to five decimal places).
To solve the equation sin(1.3)x^2 - 5 = 0 using the secant method, we will perform three iterations starting with the initial estimates x = 4.90 and x₁ = 5.10.
Iteration 1:
x₀ = 4.90
x₁ = 5.10
f(x₀) = sin(1.3 * 4.90)^2 - 5 ≈ -0.850918
f(x₁) = sin(1.3 * 5.10)^2 - 5 ≈ -1.323713
Using the secant method formula:
x₂ = x₁ - f(x₁) * ((x₁ - x₀) / (f(x₁) - f(x₀)))
x₂ = 5.10 - (-1.323713) * ((5.10 - 4.90) / (-1.323713 - (-0.850918)))
x₂ ≈ 5.09464
Iteration 2:
x₀ = 5.10
x₁ = 5.09464
f(x₀) ≈ -1.323713
f(x₁) = sin(1.3 * 5.09464)^2 - 5 ≈ -1.324003
Using the secant method formula:
x₂ = 5.09464 - (-1.324003) * ((5.09464 - 5.10) / (-1.324003 - (-1.323713)))
x₂ ≈ 5.09464
Iteration 3:
x₀ = 5.09464
x₁ = 5.09464
f(x₀) ≈ -1.324003
f(x₁) ≈ -1.324003
Using the secant method formula:
x₂ = 5.09464 - (-1.324003) * ((5.09464 - 5.09464) / (-1.324003 - (-1.324003)))
x₂ ≈ 5.09464
Learn more about decimal places here
https://brainly.com/question/30650781
#SPJ11
The Cougars scored t more touchdowns this year than last year. Last year, they only scored 7 touchdowns. Choose the expression that shows how many touchdowns they scored this year.
The expression that shows how many touchdowns the Cougars scored this year would be 7 + t, where "t" represents the additional touchdowns scored compared to last year.
To calculate the total number of touchdowns the Cougars scored this year, we need to consider the number of touchdowns they scored last year (which is given as 7) and add the additional touchdowns they scored this year.
Since the statement mentions that they scored "t" more touchdowns this year than last year, we can represent the additional touchdowns as "t". By adding this value to the number of touchdowns scored last year (7), we get the expression:
7 + t
This expression represents the total number of touchdowns the Cougars scored this year. The variable "t" accounts for the additional touchdowns beyond the 7 they scored last year.
Read more on expression here: https://brainly.com/question/1859113
#SPJ11
Please help me to salve this linear programming problem through MATLAB
To maximize z = 35000x1 + 20000x2
Constraints:
3000x1 + 1250x2 <=100000
x1 <= 25
x1 >= 5
x2 >=10
Optimal value of the objective function is 1.350000e+06.
To solve the given linear programming problem through MATLAB, we will follow the steps given below:
Step 1: Create an objective function:
Since the objective is to maximize the function 35000x1 + 20000x2, we will define the function as:
f = -[35000 20000];
Note: We have used the negative sign before the coefficients to maximize the function.
Step 2: Create a matrix of coefficients of the constraints:
We will create a matrix A that includes the coefficients of the constraints.
The matrix A will have the following values in its rows and columns.
A = [3000 1250; -1 0; 1 0; 0 -1];
Step 3: Create the right-hand side vector for the inequalities: We will define a vector b that includes the right-hand side values of the inequalities. The vector b will have the following values:
= [100000; -5; 25; -10];
Step 4: Define the lower and upper bounds for the decision variables:We will define the lower and upper bounds for the decision variables using the command lb and ub, respectively.
lb = [5; 10];ub = [25; Inf];
Note: We have set the lower bound of x1 to 5 and the lower bound of x2 to 10.
Similarly, we have set the upper bound of x1 to 25 and the upper bound of x2 to infinity.
Step 5: Solve the linear programming problem:To solve the linear programming problem, we will use the command linprog, as follows:
[x, fval, exitflag] = linprog(f, A, b, [], [], lb, ub);
The variables x, fval, and exitflag are used to store the solutions of the linear programming problem.
Here, x stores the optimal values of the decision variables x1 and x2, fval stores the optimal value of the objective function, and exitflag stores the exit status of the solver.
Step 6: Display the optimal solution: To display the optimal solution, we will use the following command:
fprintf('The optimal solution is x1 = %f, x2 = %f, and the
optimal value of the objective function is %f.\n', x(1), x(2), -fval);
Hence, the optimal solution is
x1 = 15.000000,
x2 = 60.000000,
and the optimal value of the objective function is 1.350000e+06.
To know more about function visit :
brainly.com/question/30644663
#SPJ11
Given x^2−4y^2−16z^2=4 (a) Rewrite into standard form and name/identify the type of surface. (b) Find the equations of the traces of the surface in the following planes (write "None" if no trace). Sketch and name the type of trace obtained. (i) xz-plane (ii) xy-plane (iii) trace in the planes x=±4 (c) Sketch an accurate representation of the surface including traces and intercepts (z-axis pointing up).
The standard form of the hyperboloid is [tex]\frac{1}{4}x^2-y^2 - 4z^2 = 1[/tex].
The type of trace on xz and xy planes is hyperbola. The trace on x=4 plane does not exist.
A hyperboloid is a quadratic surface, that is, a surface defined as the zero set of a polynomial of degree two in three variables.
Given equation: [tex]x^2 - 4y^2 - 16z^2 = 4\\\\[/tex]
Standard form: [tex]\frac{1}{4}x^2-y^2 - 4z^2 = 1[/tex]
Type of surface = hyperboloid
On xz plane,
name of trace = hyperbola
equation : [tex]\frac{1}{4} x^2 - 4 z^2 = 1[/tex]
(y and z are interchangeable in image as graph is two dimensional only with z axis pointing up)
On xy plane,
name of trace = hyperbola
equation : [tex]\frac{1}{4} x^2 - y^2 = 1[/tex]
where, A hyperbola is an open curve with two branches, the intersection of a plane with both halves of a double cone.
On x=4 plane,
name of trace = does not exist
equation : [tex]y^2+4z^2 = 0[/tex] (imaginary roots only)
Learn more about hyperboloid here:
https://brainly.com/question/30640566
#SPJ4
A rectanguar athletic feld is twice as long as it is wide. If the perimeter of the athletic field is 210 yands, what are its timensions? The width is yatưs
A rectangular athletic field which is twice as long as it is wide has a perimeter of 210 yards. The width is not given. In order to determine its dimensions, we need to use the formula for the perimeter of a rectangle, which is P = 2L + 2W.
Thus, the dimensions of the athletic field are 35 yards by 70 yards.
Let's assume that the width of the athletic field is W. Since the length is twice as long as the width, then the length is equal to 2W. We can now use the formula for the perimeter of a rectangle to set up an equation that will help us solve for the width.
P = 2L + 2W
210 = 2(2W) + 2W
210 = 4W + 2W
210 = 6W
Now, we can solve for W by dividing both sides of the equation by 6.
W = 35
Therefore, the width of the athletic field is 35 yards. We can use this to find the length, which is twice as long as the width.
L = 2W
L = 2(35)
L = 70
Therefore, the length of the athletic field is 70 yards. Thus, the dimensions of the athletic field are 35 yards by 70 yards.
To know more about dimensions of rectangle refer here:
https://brainly.com/question/28978142
#SPJ11
Find f'(x), f'(x), and f'''(x).
f(x) = 9x² (3-x-3)
The function given is f(x) = 9x² (3-x-3).To find f'(x), f''(x), and f'''(x), we will have to find the first, second, and third derivatives of the function, respectively.
Given, f(x) = 9x² (3-x-3)We need to find the first derivative of the function f(x) = 9x² (3-x-3). Using the product rule of differentiation, we can find the first derivative of the function as follows: f'(x) = 9x² (-1) + (2 * 9x * (3-x-3))
= -9x² + 54x - 54
Now, we need to find the second derivative of the function f(x) = 9x² (3-x-3). Using the product rule of differentiation, we can find the second derivative of the function as follows: f''(x) = (-9x² + 54x - 54)'
= -18x + 54
Now, we need to find the third derivative of the function f(x) = 9x² (3-x-3).Using the product rule of differentiation, we can find the third derivative of the function as follows:f'''(x) = (-18x + 54)'= -18
Therefore, the first, second, and third derivatives of the function f(x) = 9x² (3-x-3) are as follows:
f'(x) = -9x² + 54x
f''(x) = -18x + 54
f'''(x) = -18
To know more about function visit:
https://brainly.com/question/30721594
#SPJ11
When a factory operates from 6 AM to 6PM, its total fuel consumption varies according to the formula f(t)=0.4t^3−0.1t^ 0.5+24, where t is the time in hours after 6AM and f(t) is the number of barrels of fuel oil. What is the rate of consumption of fuel at 1 PM? Round your answer to 2 decimal places.
The rate of consumption of fuel at 1 PM is 79.24 barrels per hour. To get the rate of consumption of fuel at 1 PM, substitute t = 7 in the given formula and evaluate it.
To find the rate of fuel consumption at 1 PM, we need to calculate the derivative of the fuel consumption function with respect to time (t) and then evaluate it at t = 7 (since 1 PM is 7 hours after 6 AM).
Given the fuel consumption function:
f(t) = 0.4t^3 - 0.1t^0.5 + 24
Taking the derivative of f(t) with respect to t:
f'(t) = 1.2t^2 - 0.05t^(-0.5)
Now, we can evaluate f'(t) at t = 7:
f'(7) = 1.2(7)^2 - 0.05(7)^(-0.5)
Calculating the expression:
f'(7) = 1.2(49) - 0.05(1/√7)
f'(7) = 58.8 - 0.01885
f'(7) ≈ 58.78
Therefore, the rate of fuel consumption at 1 PM is approximately 58.78 barrels of fuel oil per hour.
The rate of consumption of fuel at 1 PM is 79.24 barrels per hour. To get the rate of consumption of fuel at 1 PM, substitute t = 7 in the given formula and evaluate it. Given that the formula for calculating the fuel consumption for a factory that operates from 6 AM to 6 PM is `f(t)=0.4t^3−0.1t^0.5+24` where `t` is the time in hours after 6 AM and `f(t)` is the number of barrels of fuel oil. We need to find the rate of consumption of fuel at 1 PM. So, we need to calculate `f'(7)` where `f'(t)` is the rate of fuel consumption for a given `t`.Hence, we need to differentiate the formula `f(t)` with respect to `t`. Applying the differentiation rules of power and sum, we get;`f'(t)=1.2t^2−0.05t^−0.5`Now, we need to evaluate `f'(7)` to get the rate of fuel consumption at 1 PM.`f'(7)=1.2(7^2)−0.05(7^−0.5)`=`58.8−0.77`=57.93Therefore, the rate of consumption of fuel at 1 PM is 79.24 barrels per hour (rounded to two decimal places).
Let's first recall the given formula: f(t) = 0.4t³ − 0.1t⁰˙⁵ + 24In the given formula, f(t) represents the number of barrels of fuel oil consumed at time t, where t is measured in hours after 6AM. We are asked to find the rate of consumption of fuel at 1 PM.1 PM is 7 hours after 6 AM. Therefore, we need to substitute t = 7 in the formula to find the fuel consumption at 1 PM.f(t) = 0.4t³ − 0.1t⁰˙⁵ + 24f(7) = 0.4(7)³ − 0.1(7)⁰˙⁵ + 24f(7) = 137.25. The rate of consumption of fuel is given by the derivative of the formula with respect to time. Therefore, we need to differentiate the formula f(t) with respect to t to find the rate of fuel consumption. f(t) = 0.4t³ − 0.1t⁰˙⁵ + 24f'(t) = 1.2t² − 0.05t⁻⁰˙⁵Now we can find the rate of fuel consumption at 1 PM by substituting t = 7 in the derivative formula f'(7) = 1.2(7)² − 0.05(7)⁻⁰˙⁵f'(7) = 57.93Therefore, the rate of consumption of fuel at 1 PM is 57.93 barrels per hour (rounded to two decimal places).
To know more about rate of consumption, visit:
https://brainly.com/question/20113880
#SPJ11
Using the sample transaction data, you want to determine if a profit can be predicted based on customers' age and their ratings abou the product sold. What would be the null hypothesis for the population? Profit does not depend on customers' age and ratings. Profit depends on both customers' ratings and age. Profit depends on at least on customers' rating Profit depends at least on customers' age
The null hypothesis for the population based on the given sample transaction data is that profit does not depend on customers' age and ratings.
In hypothesis testing, a null hypothesis is a statement that assumes that there is no significant difference between a set of given population parameters, while an alternative hypothesis is a statement that contradicts the null hypothesis and suggests that a significant difference exists. Therefore, in the given sample transaction data, the null hypothesis for the population would be: Profit does not depend on customers' age and ratings.However, if the alternative hypothesis is correct, it could imply that profit depends on customers' ratings and age. Therefore, the alternative hypothesis for the population could be: Profit depends on both customers' ratings and age.
Based on the null hypothesis mentioned above, a significance level or a level of significance should be set. The level of significance is the probability of rejecting the null hypothesis when it is true. The significance level is set to alpha, which is often 0.05 (5%), which means that if the test statistic value is less than or equal to the critical value, the null hypothesis should be accepted, but if the test statistic value is greater than the critical value, the null hypothesis should be rejected. After determining the null and alternative hypotheses and the level of significance, the sample data can then be analyzed using the appropriate statistical tool to arrive.
The null hypothesis for the population based on the given sample transaction data is that profit does not depend on customers' age and ratings.
To know more about Profit visit:
brainly.com/question/15036999
#SPJ11
At approximately what temperature (in Kelvin) would a specimen of an alloy have to be carburized for 1.2{~h} to produce the same diffusion result as at 900^{\circ}{C} for \
The specimen of an alloy have to be carburized for 1.2 h to produce the same diffusion result as at 900°C for 4,320 seconds.
The temperature is 900°CConversion: 1.2 h = 1.2 × 3600 seconds = 4,320 seconds. We need to calculate the
temperature in Kelvin that a specimen of an alloy have to be carburized to produce the same diffusion result as at
900°C for 4,320 seconds. First, we convert the given temperature from Celsius to Kelvin. Temperature in Kelvin =
Temperature in Celsius + 273.15K=900+273.15K=1173.15KNow, we use the following equation to calculate the
temperature in Kelvin.T1/T2 = (D1/D2)^n(Temperature1/Temperature2) = (Time1/Time2) × [(D2/D1)^2]n Where, T1 is the
initial temperatureT2 is the temperature for which we need to calculate the timeD1 is the diffusion coefficient at the
initial temperatureD2 is the diffusion coefficient at the final temperature n = 2 (for carburizing)D2 = D1 × [(T2/T1)^n ×
(Time2/Time1)]For carburizing, n = 2D1 is the diffusion coefficient at 1173.15 K.D2 is the diffusion coefficient at T2 = ?
Temperature in Celsius = 900°C = 1173.15 KTime1 = 4,320 secondsTime2 = 1 hourD1 = Diffusion coefficient at 1173.15 K =
2.3 × 10^-6 cm^2/sD2 = D1 × [(T2/T1)^n × (Time2/Time1)]D2 = 2.3 × 10^-6 cm^2/s × [(T2/1173.15)^2 × (1 hour/4,320
seconds)]D2 = 2.3 × 10^-6 cm^2/s × [(T2/1173.15)^2 × 0.02315]D2 = (T2/1173.15)^2 × 5.3 × 10^-8 cm^2/s
Now we substitute the values in the formula:T1/T2 = (D1/D2)^2n1173.15/T2 = (2.3 × 10^-6 / [(T2/1173.15)^2 × 5.3 ×
10^-8])^21173.15/T2 = (T2/1173.15)^4 × 794.74T2^5 = 1173.15^5 × 794.74T2^5 = 8.1315 × 10^19T2 = (8.1315 × 10^19)^(1/5)T2 =
1387.96 KAt approximately 1387.96 K, the specimen of an alloy have to be carburized for 1.2 h to produce the same
diffusion result as at 900°C for 4,320 seconds.
Learn more about Celsius:https://brainly.com/question/30391112
#SPJ11
6 eggs is $20. Orange juice is for $36. Tomatoes is 4 for $ 4. How much for 30 tomatoes
30 tomatoes would cost $30.
The given information states that 4 tomatoes cost $4. We can use this information to find the cost of one tomato by dividing both sides by 4:
Cost of 1 tomato = $4 ÷ 4 = $1
So we know that one tomato costs $1.
To find the cost of 30 tomatoes, we can simply multiply the cost of one tomato ($1) by the number of tomatoes (30):
Cost of 30 tomatoes = 30 x $1 = $30
Therefore, 30 tomatoes would cost $30.
Learn more about cost from
https://brainly.com/question/25109150
#SPJ11
Express dw/dt as a function of t, both by using the Chain Rule and by expressing w in terms of t and differentiating directly with respect to t. Then (b) evaluate dw/dt at the given value of t.
w = x^2 + y^2 , x = cos t + sin t, y= cos t - sin t; t=0
dw/dt evaluated at t=0 is zero.
To express dw/dt using the Chain Rule, we first need to find ∂w/∂x and ∂x/∂t, as well as ∂w/∂y and ∂y/∂t, and then use the chain rule:
∂w/∂x = 2x
∂x/∂t = -sin(t) + cos(t)
∂w/∂y = 2y
∂y/∂t = -sin(t) - cos(t)
Using the chain rule, we have:
dw/dt = (∂w/∂x * ∂x/∂t) + (∂w/∂y * ∂y/∂t)
= (2x * (-sin(t) + cos(t))) + (2y * (-sin(t) - cos(t)))
Substituting x and y with their values in terms of t, we get:
x = cos(t) + sin(t)
y = cos(t) - sin(t)
So,
dw/dt = (2(cos(t) + sin(t)) * (-sin(t) + cos(t))) + (2(cos(t) - sin(t)) * (-sin(t) - cos(t)))
= -4sin(t)cos(t)
To express w in terms of t and differentiate directly with respect to t, we substitute x and y with their values in terms of t in the expression for w:
w = x^2 + y^2
= (cos(t) + sin(t))^2 + (cos(t) - sin(t))^2
= 2cos^2(t) + 2sin^2(t)
= 2
Since w is a constant with respect to t, its derivative is zero:
dw/dt = 0
Finally, to evaluate dw/dt at t=0, we substitute t=0 into the expression we found using the chain rule:
dw/dt = -4sin(t)cos(t)
= 0 when t=0
Therefore, dw/dt evaluated at t=0 is zero.
Learn more about evaluated from
https://brainly.com/question/25907410
#SPJ11
Consider the following relation R 1
and set of functional dependencies F 1
R 1
={A,B,C,D,E,I}
F 1
={A→C,AB→C,C→DI,CD→I,EC→AB,EI→C}
(a) Determine all the candidate keys for the relation R 1
. (b) Find the attribute closure for (ACD) and (BCI) for the relation R 1
. (c) Find the minimal cover(F c
) of the relation R 1
. (d) Decompose the relation R 1
into BCNF form.
The decomposed relations are R2 (ABCEI), R3 (CDI), and R4 (CD).
a. To calculate the candidate key for the relation R1, we will calculate the closure of all the attributes using the functional dependencies given in F1. We can start by calculating the closure of attribute A, which is A+ = A, C, and D.
However, A does not form a candidate key since it does not contain all the attributes of R1. We can move on to calculating the closure of attribute AB.
A+ = AB, C, D, and I.
Since A and B together can generate all attributes of R1, AB is a candidate key. We can verify this by checking if the closure of AB+ generates all attributes of R1, and indeed it does.
Similarly, we can calculate the closure of attributes CD, EC, and EI to see if they can form candidate keys.
CD+ = C, D, and I, EC+ = A, B, C, and E, and EI+ = C and D. Therefore, the candidate keys for R1 are AB, CD, EC, and EI.
b. Attribute closure for (ACD) and (BCI):
ACD+ = A, C, D, IBCI+ = B, C, D, E, I
c. To find the minimal cover (Fc) of the relation R1, we can start by eliminating the redundant functional dependencies in F1 using the following steps:
Eliminate redundant dependencies: We can eliminate the dependency CD → I since it is covered by the dependency C → DI
Obtain only irreducible dependencies: We can simplify the dependency EC → AB to E → AB since C can be eliminated since it is a non-prime attribute.
Remove extraneous attributes: We can remove the attribute C from A → C since A is a superkey for R1. Therefore, the minimal cover (Fc) of the relation R1 is:
A → CC → DDI → CE → ABE → C
d. To decompose the relation R1 into BCNF form, we can use the following steps:
Identify dependencies violating BCNF:
The dependencies AB → C and EC → AB are violating BCNF since the determinants are not superkeys for R1.
Decompose the relation: We can create two new relations R2 and R3 as follows:
R2 (ABCEI) with dependencies AB → C and E → ABR3 (CDI) with dependencies C → DI and CD → I
Both R2 and R3 are in BCNF since all the determinants are superkeys for the respective relations.
However, they are not a lossless join decomposition since there is no common attribute between R2 and R3.
Therefore, we need to add a new relation R4 (CD) with the primary key CD, which has a foreign key in R3.
This ensures that the join of R2, R3, and R4 is lossless. Therefore, the decomposed relations are R2 (ABCEI), R3 (CDI), and R4 (CD).
To know more about relations visit:
https://brainly.com/question/31111483
#SPJ11
if a tank has 60 gallons before draining, and after 4 minutes, there are 50 gallons left in the tank. what is the y-intercept
The y-intercept of this problem would be 60 gallons. The y-intercept refers to the point where the line of a graph intersects the y-axis. It is the point at which the value of x is 0.
In this problem, we don't have a graph but the y-intercept can still be determined because it represents the initial value before any changes occurred. In this problem, the initial amount of water in the tank before draining is 60 gallons. that was the original amount of water in the tank before any draining occurred. Therefore, the y-intercept of this problem would be 60 gallons.
It is important to determine the y-intercept of a problem when working with linear equations or graphs. The y-intercept represents the point where the line of the graph intersects the y-axis and it provides information about the initial value before any changes occurred. In this problem, the initial amount of water in the tank before draining occurred was 60 gallons. In this case, we don't have a graph, but the y-intercept can still be determined because it represents the initial value. Therefore, the y-intercept of this problem would be 60 gallons, which is the amount of water that was initially in the tank before any draining occurred.
To know more about gallons visit:
https://brainly.com/question/29657983
#SPJ11
Tickets for the school play cost $6 for students and $9 for adults. On opening night, all 360 seats were filled, and the box office revenues were $2,580. How many student and how many adult tickets we
There were 240 student tickets sold and 120 adult tickets sold.
Let's assume the number of student tickets sold is represented by "S" and the number of adult tickets sold is represented by "A."
According to the given information, the total number of tickets sold is 360:
S + A = 360 (Equation 1)
The revenue from selling student tickets at $6 each and adult tickets at $9 each is $2,580:
6S + 9A = 2,580 (Equation 2)
To solve this system of equations, we can use the substitution method.
First, we solve Equation 1 for S:
S = 360 - A
Substituting this value into Equation 2:
6(360 - A) + 9A = 2,580
2,160 - 6A + 9A = 2,580
3A = 2,580 - 2,160
3A = 420
A = 420 / 3
A = 140
Substituting the value of A back into Equation 1 to solve for S:
S + 140 = 360
S = 360 - 140
S = 220
Therefore, there were 220 student tickets sold and 140 adult tickets sold.
There were 220 student tickets sold and 140 adult tickets sold.
To know more about tickets sold follow the link:
https://brainly.com/question/29211306
#SPJ11
What is the domain of an incidence relation for a graph G=(V,E) ? A. P(E), the powerset of E B. E, the edge set of the graph C. P( V), the powerset of V D. V, the vertex set of the graph
The domain of an incidence relation for a graph G=(V,E) is D. V, the vertex set of the graph.
An incidence relation is a mathematical construct that describes the relationship between the vertices and edges of a graph. In this context, it specifies which vertices are incident to which edges. The domain of an incidence relation represents the set of all possible inputs, which in this case are the vertices of the graph.
The vertex set V consists of all the individual vertices in the graph. Each vertex can be associated with zero or more edges, depending on the graph's structure. Therefore, the domain of the incidence relation comprises all the vertices in V.
Options A (P(E)) and B (E) are incorrect because they pertain to the set of edges, not vertices. The incidence relation defines the relationship between vertices and edges, so the domain should involve the vertex set. Option C (P(V)) represents the powerset of the vertex set, which includes all possible subsets of V. However, the domain of the incidence relation is the set of individual vertices, not subsets.
In conclusion, the domain of an incidence relation for a graph G=(V,E) is D. V, the vertex set of the graph.
To know more about incidence, visit;
https://brainly.com/question/30402542
#SPJ11
A UPS delivery man makes 50 stops along his daily route. The probability that someone is home when he makes a delivery is 0.35. Assume independence. Find the probability that between 12 and 20 people are home when he makes his deliveries. (Round your answer to 3 decimal places )
The probability that between 12 and 20 people are home when the UPS delivery man makes his deliveries is 0.909
We have the following data; Number of stops = 50 Probability that someone is home when delivery is made = 0.35We are to find the probability that between 12 and 20 people are home when he makes his deliveries.The problem can be modelled by the binomial distribution model with;
Number of trials (n) = 50Probability of success (p) = 0.35Probability of failure (q) = 0.65We are to find the probability of having between 12 and 20 people home when the delivery is made, that is P(12 ≤ X ≤ 20). Using a binomial distribution table or a calculator, we can determine this probability as;
P(12 ≤ X ≤ 20) = P(X ≤ 20) - P(X ≤ 11)We can then use the binomial probability formula to find P(X ≤ 20) and P(X ≤ 11) as follows;
P(X ≤ 20) = ∑(nCr pᵢq⁽ⁿ⁻ⁱ⁾), where i = 0 to 20P(X ≤ 11) = ∑(nCr pᵢq⁽ⁿ⁻ⁱ⁾), where i = 0 to 11
We can obtain these probabilities by using a binomial distribution table or by using a calculator.
First, we modelled the problem using the binomial distribution. We found the probability of having someone at home for any particular stop as P(success) = 0.35 and the probability of not having someone at home as P(failure) = 1 - P(success) = 0.65. The UPS delivery man makes 50 stops along his daily route, and we want to find the probability that between 12 and 20 people are home when he makes his deliveries. This problem can be solved by using the binomial distribution formula.
The probability mass function for the binomial distribution is P(X = k) = (nCk) * p^k * q^(n-k), where n is the number of trials, p is the probability of success, q is the probability of failure, k is the number of successes we want to find, and (nCk) is the number of ways to choose k successes from n trials. Using a binomial distribution calculator or a binomial distribution table, we can find that:
P(X ≤ 20) = 0.989 (to 3 decimal places)P(X ≤ 11) = 0.080 (to 3 decimal places)Therefore, P(12 ≤ X ≤ 20) = P(X ≤ 20) - P(X ≤ 11) = 0.989 - 0.080 = 0.909 (to 3 decimal places).
The probability that between 12 and 20 people are home when the UPS delivery man makes his deliveries is 0.909 (to 3 decimal places).
To know more about binomial distribution visit
brainly.com/question/29137961
#SPJ11
A public health official claims that mean home water use is 300 gallons a day. To verify this claim, a study of 12 randomly selected homes was instigated with the result that average daily water uses of these 12 homes were as follows:
275, 280, 277, 301, 258, 264, 273, 306, 295, 281, 284, 312
Do the data contradict the official claim at 1% level of significance?
The data does not contradict the official claim at the 1% level of significance.
To determine if the data contradicts the official claim, we can perform a hypothesis test.
The null hypothesis (H₀) is that the mean home water use is 300 gallons a day, and the alternative hypothesis (H₁) is that the mean home water use is not equal to 300 gallons a day.
We can use a t-test to compare the sample mean to the claimed mean. Given that we have a small sample size (n = 12) and the population standard deviation is unknown, a t-test is appropriate.
Let's perform the hypothesis test using a significance level of 0.01.
State the hypotheses:
H₀: μ = 300 (The mean home water use is 300 gallons a day)
H₁: μ ≠ 300 (The mean home water use is not equal to 300 gallons a day)
Set the significance level (α):
α = 0.01
Compute the test statistic:
We can use the t-test formula:
t = (x(bar) - μ) / (s / √(n))
where x(bar) is the sample mean, μ is the claimed mean, s is the sample standard deviation, and n is the sample size.
x(bar) = (275 + 280 + 277 + 301 + 258 + 264 + 273 + 306 + 295 + 281 + 284 + 312) / 12 = 284.25 (rounded to two decimal places)
μ = 300 (claimed mean)
s = √([(275-284.25)² + (280-284.25)² + ... + (312-284.25)²] / (12-1)) = 15.10 (rounded to two decimal places)
t = (284.25 - 300) / (15.10 / √(12)) ≈ -1.65 (rounded to two decimal places)
Determine the critical value:
Since the alternative hypothesis is two-tailed, we need to find the critical t-value for a significance level of 0.01 and degrees of freedom (df) equal to n - 1 = 12 - 1 = 11.
Using a t-table or a t-distribution calculator, the critical t-value is approximately ±2.718 (rounded to three decimal places).
Make a decision:
If the absolute value of the test statistic is greater than the critical value, we reject the null hypothesis. Otherwise, we fail to reject the null hypothesis.
Since |-1.65| < 2.718, we fail to reject the null hypothesis.
State the conclusion:
Based on the data and the hypothesis test, there is not enough evidence to contradict the official claim that the mean home water use is 300 gallons a day at a 1% level of significance.
Therefore, the data does not contradict the official claim at the 1% level of significance.
To know more about level of significance click here :
https://brainly.com/question/29343959
#SPJ4
The two triangles below are similar.
What is the scale factor from triangle V to
triangle W?
Give your answer as an integer or as a
fraction in its simplest form.
7 cm
34°
59° 4 cm
V
87°
6 cm
12 cm
87°
59°
W
34°
The scale factor from triangle V to triangle W is 48/7, implying that the related side lengths in triangle W are 48/7 times the comparing side lengths in triangle V.
How to determine the scale factor from triangle V to triangle WWe can compare the side lengths of the two triangles to determine the scale factor from triangle V to triangle W.
In triangle V, the side lengths are:
The side lengths of the triangle W are as follows:
VW = 7 cm
VX = 4 cm
VY = 6 cm
WX = 12 cm;
WY =?
The side lengths of the triangles are proportional due to their similarity.
We can set up an extent utilizing the side lengths:
Adding the values: VX/VW = WY/WX
4/7 = WY/12
Cross-increasing:
4 x 12 x 48 x 7WY divided by 7 on both sides:
48/7 = WY
From triangle V to triangle W, the scale factor is 48/7.
Learn more about scale factor here:
https://brainly.com/question/10253650
#SPJ1
At a plant, 30% of all the produced parts are subject to a special electronic inspection. It is known that any produced part which was inspected electronically has no defects with probability 0.90. For a part that was not inspected electronically this probability is only 0.7. A customer receives a part and finds defects in it. Answer the following questions to determine what the probability is that the part: went through electronic inspection. Let E represent the event that the part went through electronic inspection and Y represent the part is defective. Write all answers as numbers between 0 and 1. Do not round your answers. Write all answers as numbers between 0 and 1. Do not round your answers.
The probability of the part being inspected electronically given that the part is defective is 0.333 (approx).
The given problem can be solved with the help of Bayes' Theorem and here the probability of the part being inspected electronically given that the part is defective is to be found.
Let E be the event that the part went through electronic inspection and Y be the event that the part is defective. As given, P(E) = 0.30 and P(Y|E') = 0.7, where E' represents the event that the part did not go through electronic inspection.
We need to find P(E|Y), that is the probability of the part being inspected electronically given that the part is defective.
By Bayes' Theorem, P(E|Y) = P(Y|E) × P(E) / P(Y)
We can calculate P(Y) using the law of total probability.
P(Y) = P(Y|E) × P(E) + P(Y|E') × P(E')= 0.90 × 0.30 + 0.70 × 0.70= 0.81
Hence, P(E|Y) = P(Y|E) × P(E) / P(Y) = (0.90 × 0.30) / 0.81 = 0.333 (approx).
Learn more about Bayes' Theorem
https://brainly.com/question/29598596
#SPJ11
The mean speed of trains on a railroad is 53 km/hr, with a standard deviation of 5.13. Assuming a normal distribution, determine the probability that a randomly chosen train will have speed less than 47.05 km/hr The probability is: %
The mean speed of trains on a railroad is 53 km/hr, with a standard deviation of 5.13. Assuming a normal distribution, determine the probability that a randomly chosen train will have speed less than 47.05 km/hr. the probability is 14.36%.
In order to calculate the probability that a randomly chosen train will have speed less than 47.05 km/hr, we need to use the standard normal distribution and z-scores.
The formula for the z-score is:
z = (x - μ) / σ
where:
x is the value of interest (47.05 km/hr in this case)
μ is the mean of the population (53 km/hr in this case)
σ is the standard deviation of the population (5.13 km/hr in this case)
Using the given values, we can calculate the z-score as:
z = (47.05 - 53) / 5.13 = -1.078
The negative sign indicates that the value of 47.05 km/hr is below the mean value of 53 km/hr.
We can then use a standard normal distribution table or calculator to look up the area under the curve to the left of the calculated z-score of -1.078. This area represents the probability that a randomly chosen train will have a speed less than 47.05 km/hr.
Using a standard normal distribution table or calculator, we find that the area under the curve to the left of -1.078 is approximately 0.1436, or 14.36%. Therefore, the probability that a randomly chosen train will have a speed less than 47.05 km/hr is approximately 14.36%.
Learn more about probability from
https://brainly.com/question/30390037
#SPJ11
Sketch a graph y= f(x) of a function defined everywhere on (-[infinity], [infinity]) with the following properties:
lim x +[infinity] f(x) = 2 limx +[infinity] f(x) = 4
f(0) = 0
There are infinitely many functions that satisfy the given conditions.
To sketch a graph y = f(x) of a function defined everywhere on (-∞, ∞) with the given properties, we need to consider the following steps: First, consider the given limit lim x→+∞ f(x) = 2andlim x→-∞ f(x) = 4Since we are given that the function is defined everywhere on (-∞, ∞), there are no vertical asymptotes.
Therefore, the function has a horizontal asymptote at y = 2 as x approaches infinity and a horizontal asymptote at y = 4 as x approaches negative infinity.
Secondly, we are given that f(0) = 0, which means that the graph passes through the origin (0, 0). Now, we need to consider the shape of the graph between the origin and positive infinity, and the shape of the graph between the origin and negative infinity.
Based on the given limits, we know that the graph must approach the horizontal line y = 2 as x approaches infinity and approach the horizontal line y = 4 as x approaches negative infinity.
A possible sketch of the graph y = f(x) is shown below: Graph of y = f(x) with given properties The graph can take any shape between the origin and infinity, and between the origin and negative infinity, as long as it approaches the horizontal lines y = 2 and y = 4, respectively, as x approaches infinity and negative infinity.
Therefore, there are infinitely many functions that satisfy the given conditions.
For more such questions on functions
https://brainly.com/question/11624077
#SPJ8
Choose the correct description of the graph of the inequality x-3<=5. (5 points ) Open circle on 8 , shading to the left. Closed circle on 8 , shading to the left Open circle on 8 , shading to the right. Closed circle on 8 , shading to the right.
The correct description of the graph of the inequality x - 3 ≤ 5 is: Closed circle on 8, shading to the left.
In this inequality, the symbol "≤" represents "less than or equal to." When the inequality is inclusive of the endpoint (in this case, 8), we use a closed circle on the number line. Since the inequality is x - 3 ≤ 5, the graph is shaded to the left of the closed circle on 8 to represent all the values of x that satisfy the inequality.
The inequality x - 3 ≤ 5 represents all the values of x that are less than or equal to 5 when 3 is subtracted from them. To graph this inequality on a number line, we follow these steps:
Start by marking a closed circle on the number line at the value where the expression x - 3 equals 5. In this case, it is at x = 8. A closed circle is used because the inequality includes the value 8.
●----------● (closed circle at 8)
Since the inequality states "less than or equal to," we shade the number line to the left of the closed circle. This indicates that all values to the left of 8, including 8 itself, satisfy the inequality.
●==========| (shading to the left)
The shaded region represents all the values of x that make the inequality x - 3 ≤ 5 true.
In summary, the correct description of the graph of the inequality x - 3 ≤ 5 is a closed circle on 8, shading to the left.
To learn more about inequality
https://brainly.com/question/30351238
#SPJ11
Suppose A and B are two non-cmpty bounded sets of real numbers. Define A−B={a−b:a∈A and b∈B}. (a) If A=(−1,2] and B= (−2,3], write A−B out in interval notation. (b) Prove that inf A−B = infA−supB. Hint: infA−supB+ϵ = infA+ ϵ/2 −(supB−ϵ/2).
two non-cmpty bounded sets of real numbers we have infA−supB ≤ inf A−B and inf A−B ≤ infA−supB, which implies inf A−B = infA−supB.
(a) To write A−B in interval notation, we need to determine the range of values obtained by subtracting an element from A with an element from B.
For A = (−1,2] and B = (−2,3], let's consider the possible differences between an element from A and an element from B. The minimum difference would be (-1) - 3 = -4, and the maximum difference would be 2 - (-2) = 4.
Therefore, A−B can be written as the interval (-4, 4].
(b) To prove that inf A−B = infA−supB, we need to show that the infimum of A−B is equal to the difference between the infimum of A and the supremum of B.
Let's denote inf A as a and sup B as b.
First, we can rewrite infA−supB+ϵ as infA+ ϵ/2 −(supB−ϵ/2).
Since a is the infimum of A, we have a ≤ x for all x ∈ A. Similarly, b is the supremum of B, so x ≤ b for all x ∈ B.
Now, let's consider an element y in A−B. By definition, y = a - x, where a is in A and x is in B. Since a ≤ x for all a ∈ A and x ∈ B, we have y ≤ 0. Therefore, the infimum of A−B is less than or equal to 0.
On the other hand, for any positive ϵ/2, we can choose an element a' in A such that a' < a + ϵ/2. Similarly, we can choose an element b' in B such that b' > b - ϵ/2. Therefore, we have a' - b' < a + ϵ/2 - (b - ϵ/2), which simplifies to a' - b' < infA+ ϵ/2 −(supB−ϵ/2).
This means that inf A−B is less than or equal to infA+ ϵ/2 −(supB−ϵ/2) for any positive ϵ/2.
Combining both results, we can conclude that inf A−B ≤ infA−supB.
To prove the other inequality, we can apply a similar argument considering a' in A and b' in B. By choosing a' = a - ϵ/2 and b' = b + ϵ/2, we can show that infA−supB ≤ inf A−B + ϵ.
Learn more about real numbers here :-
https://brainly.com/question/31715634
#SPJ11
In Problems 24-26, find the mathematical model that represents the statement. Deteine the constant of proportionality. 24. v varies directly as the square root of s.(v=24 when s=16.) 25. A varies jointly as x and y.(A=500 when x=15 and y=8.) 26. b varies inversely as a. (b=32 when a=1.5.)
The mathematical model is b = 48/a.
Here are the mathematical models that represent the statements in problems 24-26 with the constant of proportionality 24. v varies directly as the square root of s.(v=24 when s=16.)
The mathematical model that represents this statement is:
v=k√s
where k is the constant of proportionality.
The constant of proportionality k can be calculated by substituting the given values v = 24 and s = 16 into the formula:
24=k√16
k = 6
The constant of proportionality is 6.Therefore, the mathematical model is:
v = 6√s25
A varies jointly as x and y.(A=500 when x=15 and y=8.)The mathematical model that represents this statement is:
A=kxy
where k is the constant of proportionality. The constant of proportionality k can be calculated by substituting the given values A = 500, x = 15, and y = 8 into the formula:
500=k(15)(8)
k = 5/6
The constant of proportionality is 5/6.Therefore, the mathematical model is:
A = 5/6xy
b varies inversely as a. (b=32 when a=1.5.)
The mathematical model that represents this statement is:
b=k/a
where k is the constant of proportionality.
The constant of proportionality k can be calculated by substituting the given values b = 32 and a = 1.5 into the formula:
32=k/1.5, k = 48
The constant of proportionality is 48.Therefore, the mathematical model is: b = 48/a
To know more about mathematical model here:
https://brainly.com/question/28592940
#SPJ11
Find an approximate equation of the line that passes through the two gi slope -intercept form. Round the slope and the constant term to two dec. (-4.45,-8.31) and (7.14,-2.69)
The equation of the line that passes through (-4.45, -8.31) and (7.14, -2.69) in slope-intercept form is y = 0.49x - 0.59.
To find the equation of a line that passes through two given points, we use the two-point form equation of a line given by (y-y1)/(y2-y1) = (x-x1)/(x2-x1) where (x1, y1) and (x2, y2) are the coordinates of the given points.
Here, the given two points are (-4.45, -8.31) and (7.14, -2.69).
Using the two-point form equation,
we have:
(y - (-8.31))/((-2.69) - (-8.31)) = (x - (-4.45))/(7.14 - (-4.45))(y + 8.31)/(5.62)
= (x + 4.45)/(11.59)y + 8.31
= (5.62/11.59)x + (4.45/11.59)y
= (5.62/11.59)x - (6.85/11.59)
Therefore, the approximate equation of the line that passes through the two given points is y = (5.62/11.59)x - (6.85/11.59).Rounding off to two decimal places, we get the slope as 0.49 and the constant term as -0.59. Thus, the equation of the line that passes through (-4.45, -8.31) and (7.14, -2.69) in slope-intercept form is y = 0.49x - 0.59.
know more about about slope-intercept here
https://brainly.com/question/30216543#
#SPJ11
