A person who owns a 2/3 of a land sells 1/4 of it express the land sold as a fraction of the whole land

If the saving rate is 1, it means that an individual or an economy saves their entire income and spends nothing. This implies that the consumption rate is 0, and all income is being saved.

In this scenario, the investment rate is equal to the saving rate, as there is no consumption spending. Therefore, the economy is investing all of its income in capital goods and not in consumption goods. This approach may result in high economic growth in the future due to the increased production capacity of the economy. However, in the short term, it may lead to a decrease in consumer demand and a decrease in output and employment in sectors producing consumer goods.

To learn more about investment : brainly.com/question/15105766

#SPJ11

156.25cm

Step-by-step explanation:

The area of a square is L×L

12.5×12.5=156.25cm

To use Lagrange multipliers, we first need to set up our objective function and constraint equation. Constructing a box with dimensions 12x12x6 feet will minimize the cost of construction.

Our objective is to minimize the cost of constructing the box, which is equal to:

C = 5xy + 2(3xy + 3xz + 3yz)

where x, y, and z are the dimensions of the box, and we have broken up the cost into the bottom and sides/top respectively. Our constraint is that the volume of the box must be 480 cubic feet, so:

xyz = 480

To use Lagrange multipliers, we set up the following equation:

∇C = λ∇(xyz)

where ∇C is the gradient of our objective function, ∇(xyz) is the gradient of our constraint equation, and λ is our Lagrange multiplier.

Taking the partial derivatives of our objective and constraint functions, we get:

∇C = (5y, 5x, 6x + 6y)
∇(xyz) = (yz, xz, xy)

Setting these equal and solving for λ, we get:

5y / yz = 5x / xz = (6x + 6y) / xy = λ

Simplifying, we get:

x = y = 2z

Substituting this into our constraint equation, we get:

4z^3 = 480

z = 6

Substituting this back into our dimensions, we get:

x = y = 12

So the minimum cost of constructing the box is:

C = 5(12)(12) + 2(3(12)(12) + 3(12)(6) + 3(12)(6)) = $1,296

Therefore, constructing a box with dimensions 12x12x6 feet will minimize the cost of construction.

To find the minimum cost for constructing a 480 cubic feet box with the bottom costing $5 per square foot and the top and sides costing $3 per square foot, we can use Lagrange multipliers. Let the dimensions of the box be length (x), width (y), and height (z).

First, we need to define the constraint function:
G(x, y, z) = xyz - 480 (the volume constraint)

Next, define the cost function:
C(x, y, z) = 5xy + 3(xz + yz + xy) (cost of bottom + cost of top and sides)

Now, we use the Lagrange multiplier λ and set the gradient of the cost function equal to the gradient of the constraint function multiplied by λ:
∇C(x, y, z) = λ∇G(x, y, z)

This results in a system of equations:

5y + 3z + 3y = λy
5x + 3z + 3x = λx
3x + 3y = λz

We also have the constraint equation:
xyz = 480

Solve this system of equations to find the optimal dimensions x, y, and z. Then, plug these dimensions into the cost function C(x, y, z) to find the minimum cost for constructing the 480 cubic feet box.

Learn more about Lagrange multipliers at: brainly.com/question/30776684

#SPJ11

Based on the information provided, the type of sample used in the research study would be a convenience sample.

A convenience sample is a non-probability sampling technique where participants are selected based on their availability and willingness to participate. In this case, the professor selected the first 55 students who arrived in class, which means the sample was not selected randomly or systematically. It is important to note that convenience samples may not represent the entire population accurately, and therefore, the results obtained from such samples may not be generalizable to the larger population. As such, caution should be taken when interpreting the findings of this research study.

To know more about patterns visit:

https://brainly.com/question/27880002

#SPJ11

Answer: 60

Step-by-step explanation:

Lowest common multiple is the smallest number that 5 10 and 12 can all multiply too

Multiples of 10 are easy, any number ending in 0

So you need to find a number that 5 and 12 go into that ends in 0

We can do this by doing 5*12 which gives us 60 which is divisible by 10

The Diagonal distance between point A and point B is approximately 8.2 units.

1. To find the diagonal distance between point A (2Y, 1X) and point B (9Y, 9X), we can use the distance formula:

distance = √((y2 - y1)^2 + (x2 - x1)^2)

distance = √((9 - 2)^2 + (9 - 1)^2)

distance = √(49 + 64)

distance = √113

distance ≈ 10.6

Therefore, the diagonal distance between point A and point B is approximately 10.6 units.

2. To find the diagonal distance between point A (4Y, -1X) and point B (-15Y, 3X), we can use the distance formula:

distance = √((y2 - y1)^2 + (x2 - x1)^2)

distance = √((-15 - 4)^2 + (3 - (-1))^2)

distance = √(361 + 16)

distance = √377

distance ≈ 19.4

Therefore, the diagonal distance between point A and point B is approximately 19.4 units.

3. To find the diagonal distance between point A (7Y, 1X) and point B (5Y, 9X), we can use the distance formula:

distance = √((y2 - y1)^2 + (x2 - x1)^2)

distance = √((5 - 7)^2 + (9 - 1)^2)

distance = √4 + 64

distance = √68

distance ≈ 8.2

Therefore, the diagonal distance between point A and point B is approximately 8.2 units.

To know more about Diagonal distance.

https://brainly.com/question/31654603

#SPJ11

The type of indeterminate form obtained by direct substitution in the given limit is 1^∞, where 1^∞ is not a determinate form and its value is not always predictable.

Applying L'Hôpital's Rule to the limit, we get:

lim_(xâ0^+) [cos(Ï/2 - x)]^x = lim_(xâ0^+) e^[x ln(cos(Ï/2 - x))]

Now, applying L'Hôpital's Rule to the exponent, we get:

= lim_(xâ0^+) e^[x (-tan(Ï/2 - x))]

= e^0 = 1

Therefore, the limit is equal to 1.

Using a graphing utility to graph the function, we can see that the limit approaches 1 as x approaches 0 from the right side. Therefore, the result obtained using L'Hôpital's Rule is verified by the graph.

To learn more about indeterminate : brainly.com/question/30633788

#SPJ11

Answer:

8+17+5=30

Step-by-step explanation:

Kevin spends mixing, baking, and cooling the muffins. If you add 7 and 8 you get 15 and add another 5 you get 20+10 = 30

The volume of the cone is 57.44 cubic cm

The volume of the cone and sphere is 229.88 cubic cm

The height of the square pyramid will be 115.03 cm

The volume of a cone can be calculated using the formula:

V = (1/3)πr²h

where

V = volume of the cone

π = pi, approximately 3.14

r = radius of the base of the cone

h = height of the cone

2 x V = 2 * (1/3) * 3.14 * 2.8² * 3.5

The volume of the cone is 57.44 cubic cm

2.

Volume = volume of cone + volume of sphere

= (4/3)πr³ +  (1/3)πr²h

= (4/3) * 3.14 * 3.4³ +  (1/3) * 3.14 * 3.4² * 5.4

= 229.88 cubic cm

3. Volume of square pyramid

= base area * h/3

when base is 230

= 230² * 147/3 = 2592100

when base is 260

260² * h/3 = 2592100

h/3 = 2592100 / 260²

h = 115.03 cm

Learn more about Volume of square pyramid at

https://brainly.com/question/18994842

#SPJ1

Answer:

Kiera will use 15 yellow charms

Step-by-step explanation:

The pattern would look like this:

BBYYYBBYYYBBYYYBBYYYBBYYY

B = Blue Charms

Y = Yellow Charms

False. The number of steps involved in each type of hypothesis test depends on the specific details of the problem and the statistical method used.

what is statistics?

Statistics is a branch of mathematics that deals with the collection, analysis, interpretation, presentation, and organization of numerical data.

False. The steps in a two-sample hypothesis test are not necessarily twice the number of steps in a one-sample hypothesis test.

Both one-sample and two-sample hypothesis tests involve similar basic steps such as stating the null and alternative hypotheses, selecting a significance level, calculating a test statistic, and making a decision to reject or fail to reject the null hypothesis based on the calculated p-value.

However, in a two-sample hypothesis test, there are additional steps required to compare the means or proportions of two different groups or samples. These additional steps involve checking the assumptions of equal variances and independence, calculating a pooled standard error or degrees of freedom, and performing a two-sample t-test or z-test depending on the sample size and distribution.

Therefore, False.  the number of steps involved in each type of hypothesis test depends on the specific details of the problem and the statistical method used.

To learn more about statistics from the given link:

https://brainly.com/question/28053564

#SPJ4

Answer:

a. The population distribution of the duration of your phone calls is likely to be bell shaped. This is because the mean, median, and mode are all equal to 2.4 minutes. This means that the data is evenly distributed around the mean.

b. The distribution of the 45 calls is likely to be bell shaped as well. This is because the sample size is large enough to be representative of the population. Additionally, the sample was randomly selected, so it is unlikely to be biased.

c. The sampling distribution of the sample mean is also likely to be bell shaped. This is because the central limit theorem states that the sampling distribution of the sample mean will be approximately normal, regardless of the shape of the population distribution, as long as the sample size is large enough. In this case, the sample size is 45, which is large enough to satisfy the requirements of the central limit theorem.

It is important to note that the sampling distribution of the sample mean will only be exactly normal if the population distribution is normal. However, in most cases, the sampling distribution will be approximately normal, even if the population distribution is not.

Step-by-step explanation:

Answer: 8575/2

Step-by-step explanation:

The value of x in the circle is 3.

We have,

In geometry, a secant is a line that intersects a circle at two distinct points.

The formula for two secant segments on a circle states that the product of the lengths of one secant segment and its external segment is equal to the product of the lengths of the other secant segment and its external segment.

We will use the formula for two secants on a circle.

So,

There are two secant segments on the circle.

This means,

5 x (5 + 3x + 1) = 6 x (6 + 2x)

Now,

Solve for x.

5 x (5 + 3x + 1) = 6 x (6 + 2x)

Distributive property.

5 x (6 + 3x) = 6 x (6 + 2x)

Adding like terms

30 + 15x = 36 + 12x

15x - 12x = 36 - 30

2x = 6

Divide 2 on both sides.

x = 3

Thus,

The value of x in the circle is 3.

Learn more about Circle here:

https://brainly.com/question/11833983

#SPJ1

The expression (×) = 2× - 5ײ + 3 is a quadratic function. It represents a parabola that opens downward with a vertex at (0,3). The x-intercepts are (-1,0) and (3/5,0), and the y-intercept is (0,3).

The given expression (×) = 2× - 5ײ + 3 is a quadratic function in standard form, where the coefficient of the x² term is negative, indicating that the parabola opens downward. The standard form of a quadratic function is f(x) = ax² + bx + c, where a, b, and c are constants.

To find the vertex of the parabola, we can use the formula x = -b/2a, which gives the x-coordinate of the vertex. In this case, a = -5 and b = 2, so x = -2/(2*(-5)) = 0. The y-coordinate of the vertex can be found by substituting x = 0 into the expression, which gives f(0) = 2(0) - 5(0)² + 3 = 3. Therefore, the vertex of the parabola is at (0,3).

To find the x-intercepts of the parabola, we can set the expression equal to zero and solve for x. This gives the quadratic equation 5x² - 2x - 3 = 0. Factoring this equation, we get (5x + 3)(x - 1) = 0, so the x-intercepts are -3/5 and 1. However, we can discard the negative value because it is not within the domain of the problem. Therefore, the x-intercept is (3/5,0).

To find the y-intercept of the parabola, we can set x = 0 in the expression, which gives f(0) = 3. Therefore, the y-intercept is (0,3).

In conclusion, the expression (×) = 2× - 5ײ + 3 represents a downward-opening parabola with a vertex at (0,3), x-intercept at (3/5,0), and y-intercept at (0,3).

To learn more about parabola click here, brainly.com/question/29267743

#SPJ11

Therefore, the minimum amount of rubber needed to manufacture a set of four basketballs is 1130.96 square inches.

To determine the minimum amount of rubber needed to manufacture a set of four basketballs, we need to calculate the total surface area of one basketball. The formula to calculate the surface area of a sphere is 4πr², where r is the radius of the sphere. The diameter of a standard basketball is 9.5 inches, so the radius is half of that, which is 4.75 inches.
Using the formula, we can calculate the surface area of one basketball as 4π(4.75)² = 282.74 square inches. To manufacture a set of four basketballs, we need to multiply the surface area of one basketball by four, which gives us 1130.96 square inches.
To know more about inches visit:

https://brainly.com/question/9264277

#SPJ11

The linear combination of u and v that gives us the vector ⟨−10,−6⟩ is (−22,−6)

To find a linear combination of the vectors u and v that results in the vector ⟨−10,−6⟩, solve the system of linear equations:

a u + b v = ⟨−10,−6⟩

where a and b are scalars.

Expanding the left-hand side using the given vectors:

a ⟨−2,−3⟩ + b ⟨−1,3⟩ = ⟨−10,−6⟩

Simplify:

⟨−2a − b, −3a + 3b⟩ = ⟨−10,−6⟩

The following system of equations is derived:

-2a - b = -10

-3a + 3b = -6

Solve for a and b by substitution. Rearrange the first equation to solve for b:

b = -10 + 2a

Substitute this expression for b into the second equation:

-3a + 3(-10 + 2a) = -6

Simplify:

-3a - 30 + 6a = -6

3a = 24

a = 8

Substitute the value for a into the expression for b:

b = -10 + 2a = -10 + 2(8) = 6

Therefore, the linear combination of u and v that gives us the vector ⟨−10,−6⟩ is:

8u + 6v = 8⟨−2,−3⟩ + 6⟨−1,3⟩ = ⟨−16,−24⟩ + ⟨−6,18⟩ = ⟨−22,−6⟩

So, 8u + 6v = ⟨−22,−6⟩ which is the desired linear combination of the vectors u and v.

learn more about linear combination: https://brainly.com/question/29393965

#SPJ1

The complete question in ideal form is given as thus:

Given vector u = (-2,-3 and v (-1,3) , find a linear combination of the vectors U and v of the form au + bv that would result in the - vector (-10, -6).

If Andrea ate the same amount of calories both days, Each cookie has 100 calories.

To find out how many calories are in each cookie, we need to determine the total number of calories consumed and divide it by the total number of cookies.

On Friday, Andrea ate 4 cookies and 1700 calories with her meals, resulting in a total of 1700 + (4 * C) calories, where C represents the calories per cookie.

On Saturday, Andrea ate 5 cookies and 1650 calories with her meals, resulting in a total of 1650 + (5 * C) calories.

Since Andrea ate the same amount of calories both days, we can set up an equation:

1700 + (4 * C) = 1650 + (5 * C)

Simplifying the equation, we get:

50 = C

Therefore, each cookie has 50 calories.

It's worth noting that the solution assumes that the calorie content of the meals on both days is the same and only the calorie content from the cookies varies.

To learn more about total number click here

brainly.com/question/28850076

#SPJ11

Answer:

The slope is 0

Step-by-step explanation:

The slope-intercept form is y = mx + b, where m is the slope and b is the y-intercept.

y = mx + b

Using the slope-intercept form, the slope is 0.

m = 0

(See the attachment below)

Hope this helps :)

Pls brainliest...

The domain of the function is all non-negative real numbers.

In this situation, the function F(n) is used to estimate the amount of adhesive needed to tile a floor with an area of n square feet. The expression F(n) = n√+1 represents the formula used for the estimation.

To determine the domain of the function, we need to consider the restrictions or limitations on the variable n. In this case, since we are dealing with the area of a floor, the area cannot be negative. Therefore, the domain of the function consists of all non-negative real numbers.

In other words, any non-negative value of n, including zero and all positive real numbers, can be used as input for the function. However, negative values are not applicable in this context since the area of a floor cannot be negative.

Hence, the domain of the function F(n) in this situation is all non-negative real numbers.

To learn more about real numbers click here

brainly.com/question/31715634

#SPJ11

Answer: #4

Step-by-step explanation:

I haven't done anything like this in years but I think it is the 4th answer :)

Sorry if I'm wrong. I am a year ahead in math and in an honors class so i would think I'm pretty smart

Answer: 0

Step-by-step explanation:

Range = Highest number - lowest number

range = 6 - 6

range = 0

The solution to the system of equations is

x = 3

y = 2

z = 2

Here, we have,

To solve for x, y, and z, we can use the elimination method or substitution method. Here, we will use the elimination method.

First, we will eliminate y from the equations by multiplying the first equation by 3 and the second equation by 1, and then adding them:

(3) (2x – y + 3z = 10)

6x – 3y + 9z = 30

(1) (x + 3y – 2z = 5)

x + 3y – 2z = 5

Adding the two equations gives:

7x + 7z = 35

Simplifying, we get

x + z = 5 (Equation 1)

Next, we will eliminate y again by multiplying the second equation by 2 and the third equation by 3, and then adding them:

(2) (x + 3y – 2z = 5)

2x + 6y – 4z = 10

(3) (3x – 2y + 4z = 12)

9x – 6y + 12z = 36

Adding the two equations gives:

11x + 8z = 46

Substituting x + z = 5 from Equation 1 into the above equation, we get:

11(x + z) + 8z = 46

11x + 19z = 46

Solving for z, we get:

z = 2

Substituting z = 2 into x + z = 5 from Equation 1, we get:

x + 2 = 5

x = 3

Finally, substituting x = 3 and z = 2 into any of the original equations, we can solve for y:

2x – y + 3z = 10

2(3) – y + 3(2) = 10

6 – y + 6 = 10

y = 2

Therefore, the solution to the system of equations is:

x = 3

y = 2

z = 2

Read more about Simultaneous equations at: brainly.com/question/148035

#SPJ1

complete question:

Solve for x, y and z

2x – y + 3z = 10

x + 3y – 2z = 5

3x – 2y + 4z = 12

The missing values from the ratio table are underlined:

Peppermints: 14, 2, 2/7.

Chocolates: 21, 21, 189.

To fill in the missing values in the ratio table, we need to find the common ratio between the given values.

For the Peppermints row:

Common ratio = (2nd value) / (1st value) = 2 / 14 = 1/7

So, the missing value can be found by multiplying the 2nd value (2) by the common ratio:

Missing value = (2nd value) * (common ratio) = 2 * (1/7) = 2/7

Therefore, the missing value in the Peppermints row is 2/7.

For the Chocolates row:

Common ratio = (3rd value) / (2nd value) = 189 / 21 = 9

The missing value in the Chocolates row can be found by dividing the 3rd value (189) by the common ratio:

Missing value = (3rd value) / (common ratio) = 189 / 9 = 21

Therefore, the missing value in the Chocolates row is 21.

The completed ratio table is as follows:

Peppermints - 14, 2, 2/7

Chocolates - 21, 21, 189

Learn more about ratio at brainly.com/question/29774220

#SPJ1

The best estimate of the random sample in the survey that support the proposal is the option; 4.1

A random sample is a collection of data selected from a population such that each member of the population have the same chance of being selected.

The best estimate can be obtained from the mean value of the result from the poll, which can be obtained as follows;

The mean response = The sum of the response ÷ The count or the number of responses

The responses are; 7, 2, 6, 7, 3, 5, 5, 3, 2, 1

The sum of the response = 7 + 2 + 6 + 7 + 3 + 5 + 5  + 3 + 2 + 1 = 41

The number of response = 10

The mean of the response = (7 + 2 + 6 + 7 + 3 + 5 + 5  + 3 + 2 + 1)/10 = 4.1

The best estimate of the state citizens that support the proposal, therefore is; 4.1, which indicates that the citizens in the sample are slightly in support of the proposal.

Learn more on the best estimate in statistics here: https://brainly.com/question/13119591

#SPJ1

Answer:

To solve the inequality 3 ≤ (x - 4)/2 + x/3 < 2, we can start by simplifying the expression on the right-hand side:

(x - 4)/2 + x/3 = (3(x - 4) + 2x)/6 = (5x - 12)/6

Substituting this back into the inequality, we have:

3 ≤ (5x - 12)/6 < 2

Multiplying both sides by 6, we get:

18 ≤ 5x - 12 < 12

Adding 12 to all sides, we get:

30 ≤ 5x < 24

Dividing all sides by 5, we get:

6 ≤ x < 4.8

Since x is an integer, the only integer that satisfies this inequality is x = 6. Therefore, the solution set for the inequality 3 ≤ (x - 4)/2 + x/3 < 2, where x belongs to an integer, is {6}.

Learn more about Inequalities here:

https://brainly.com/question/30228778

#SPJ3

Step-by-step explanation:

a probability is airways the ratio

number of desired cases / number of totally possible cases

so, we have 7 nickels and 6 dimes. together that means we have 7+6 = 13 coins in total in the pocket.

since we return the coin from the first pull, we have the exact same probabilities for the second pull.

the 2 pulls are to be considered one combined event, so we need to combine the individual probabilities for the overall event probability.

the probabilty to pull a nickel in a pull is

7/13

7 desired possible outcomes over 13 total possible outcomes.

the combination of the probabilities of both pulls is simply their product.

so, the probability to pull 2 nickels is

7/13 × 7/13 = 49/169 = 0.289940828...

The graph of the logaritmic function is on the image at the end.

So here we want to graph the function:

y = 3log₂(-x) - 9

To graph this, we can evaluate it in some values and then find some points. We can graph these points and then connect them.

if x = -1 then:

y = 3*log₂(1) - 9   = -9

So we have the point (-1, 9)

if x = -2 then:

y = 3*log₂(2) - 9   = -6

We have the point (-2, -6)

And so on, when you have enough points, you can graph them and connect them, you should get something like the graph in the image at the end.

Learn more about logarithms at:

https://brainly.com/question/13473114  

#SPJ1                                                                  

The shape that has reflectional symmetry but not rotational symmetry is the water bottle and

bulb

A shape or object that exhibits reflectional symmetry but not rotational symmetry is one that can be reflected acros a line or axis to create a mirror image  but it cannot be rotated by any angle and still maintain the same appearance. In other words, it does not possess any rotational symmetry

Along the vertical axis, the water bottle has reflectional symmetry. Th bulb can possess reflectional symmetry when kept symmetrical to a particular axis.

Both lacks rotational symmetry

Learn more about reflectional symmetry at

https://brainly.com/question/24230697

#SPJ1