A physical property can be _________. A. altered with a physical change. B. used to change the identity of a substance. C. observed using the 5 senses. D. a chemical property as well.

Answers

Answer 1

Answer:

It is C. observed using the 5 senses.

Explanation:

you can observe a substance without changing its identity.

Answer 2

A physical property can be a chemical property as well.

A physical property refers to a characteristic or behavior of a substance that can be observed or measured without changing the substance's chemical composition. Physical properties include characteristics such as color, density, melting point, boiling point, solubility, conductivity, and so on.

Option A, "altered with a physical change," is true for physical properties. Physical changes, such as changes in state (solid to liquid to gas), changes in shape, or changes in phase, can alter certain physical properties of a substance without changing its chemical composition.

Option B, "used to change the identity of a substance," is not accurate for physical properties. Physical properties alone do not change the identity or chemical composition of a substance.

Option C, "observed using the 5 senses," is partially true. Some physical properties, such as color, odor, and texture, can be observed directly using the senses. However, many physical properties require specific measurement techniques or instruments to be accurately determined.

Option D, "a chemical property as well," is true. Some physical properties can also provide information about the chemical behavior or reactivity of a substance. For example, flammability, reactivity with acids or bases, or oxidation resistance are both physical and chemical properties, as they involve the behavior of a substance during a chemical reaction or interaction.

Therefore, the correct answer is D. a chemical property as well.

Learn more about physical property from the link given below.

https://brainly.com/question/24632287

#SPJ2


Related Questions

High-frequency sound waves have a shorter_____ and a higher ______ than low frequency sound waves.​

Answers

Answer:

High-frequency sound waves have a shorter wavelength and a higher amplitude than low frequency sound waves.

How does inclusions represent the principles




Will give 15 points

Answers

Inclusions represent the principles because inclusion is the counting and quantity principle that refers to the understanding all numbers preceding a number can be or are systematically included in the value of another number.

fountain experiment is related to......... gas.
1.Oxygen. 2.nitrogen
3.carbondioxide. 4.ammonia​

Answers

Answer:

4. ammonia

fountain experiment is related to ammonia gas.

The density of aluminum is 2.7 g.ml. what is the volume of 16.2 grams? HELP

Answers

Answer:

The answer is

6.0 mL

Explanation:

The volume of a substance when given the density and mass can be found by using the formula

[tex]volume = \frac{mass}{density} [/tex]

From the question

density = 2.7 g/mL

mass of aluminum = 16.2 g

The volume is

[tex]volume = \frac{16.2}{2.7} [/tex]

We have the final answer as

6.0 mL

Hope this helps you

Choose the best description of a covalent bond from the choices below.
A. Two water molecules interact due to partial charges on the oxygen and hydrogen atoms.
B. A magnesium donates electrons and forms bonds with two chloride ions.
C. A bond forms between a hydrogen from one molecule and a nitrogen from another molecule.
D. A positive potassium ion forms a bond with a negative chloride ion.
E. A nitrogen atom shares electrons with three hydrogen atoms

Answers

Answer:

A. Two water molecules interact due to partial charges on the oxygen and hydrogen atoms

Explanation:

A covalent bond is formed when the sharing of the two electron pairs and creates a stable balance of attractive and repulsive forces. The sharing allows the atoms to attain the equivalent of the outer shell. Sharing corresponds to the stable electronic configuration.

Need help with this

Answers

Answer:

Environmentalism

Explanation:

Environmental Science is the pursuit of knowledge about the environment, while Environmentalism as you know, "a social movement dedicated to protecting the natural world and people from undesirable changes".

Which element is malleable and ductile?
○Flourine O Gallium
O Silicon O Phosphorous​

Answers

Answer:

Gallium

Explanation:

The element that is malleable and ductile is gallium.

Gallium is a metal that exhibits the properties of malleability and ductility.

The ability of a material to be hammered or rolled into thin sheets without breaking or shattering is referred to as malleability. This characteristic of gallium makes it simple to shape or flatten it under pressure without shattering.

Contrarily, ductility describes a material's capacity to be pulled into thin wires without cracking. Gallium is ductile, which means it can be bent into the shape of thin wires without breaking.

Therefore, the correct option is gallium.

Learn more about gallium here:

https://brainly.com/question/29456292

#SPJ 2

write down the importance of nitrogen cycle​

Answers

Answer:Nitrogen is a crucially important component for all life. ... It is an important part of many cells and processes such as amino acids, proteins and even our DNA. It is also needed to make chlorophyll in plants, which is used in photosynthesis to make their food.

An atom has a mass number of 9 and 5 neutrons. What is its atomic number?
O A. 19
B. 14
C. 11
D. 4

Answers

Answer:

D.4

Explanation:

Number of neutron= mass number - atomic number

where; d no of neutron is 5

d mass no is 9

atomic number be x

5=9-x

x=9-5

x=4

Answer: B 4

Explanation:approved

When thermal energy is added to an object, what happens to the motion of the particles?

Answers

The atoms start vibrating faster

identify and describe one common electrostatic phenomenon

Answers

Answer:

There are many examples of electrostatic phenomena, from those as simple as the attraction of the plastic wrap to one's hand after it is removed from a package to the apparently spontaneous explosion of grain silos, the damage of electronic components during manufacturing, and photocopier & laser printer operation

Which of the following is the most stable?
A.Hydrogen
B.Lithium
C.Helium
D. Sodium
E.None of the above

Answers

The correct option is C.

Helium is a noble gas and these do not react at all. All noble gases are the most stable elements and can be found in the last column of the periodic table

Every other element here is in column 1. The element in group 1 and 7 are the least stable because they are only 1 electron away from having a full outer shell

The closer an element is to almost having a full outer shell, the more reactive it is

Once it has a full shell (group 8/noble gases) it is stable

is ripping paper a chemical or physical app​

Answers

Answer:

physical change

Explanation:

it doesnt change it chemically

Answer:

Ripping paper is physical

Explanation:

The way you know if it is physical or not is does it change physically, any physical change

No chemical changes occurred because the chemical matter didn't change nor did the actual object, it's not like the paper turned into a hotdog so it would be physical (if that makes any sense ;))

graphite conducts electricity but dimond does not .why?​

Answers

Graphite can conduct electricity because of the delocalised (free) electrons in its structure. These arise because each carbon atom is only bonded to 3 other carbon atoms. ... However, in diamond, all 4 outer electrons on each carbon atom are used in covalent bonding, so there are no delocalised electrons.

What is the percent abundance of Pt-198, if the average atomic mass of platinum is 195.16 and platinum has four naturally occurring isotopes? A) 6% B) 8% C) 25% D) 50%

Answers

Answer:

Explanation:

8%

What is the pressure, in atm, of 1.0 moles of neon gas in a 5.0 L steel container at a temperature of 291 K?

Answers

Answer:

4.78atm

Explanation:

given: v=5L R=0.0821LatmK^-1*291K

n=1mol T=291K

PV=nRT

P= 1mol*0.0821LatmK^-1*291K / 5.0L

=4.78atm

Solubility of CO2 in g/100 g water
Solubility of Oz in g/100 g water
Temperature in °C
Independent Variable
Dependent Variable



pls helppp asap

Answers

Answer:

Temperature - Independent variable

The solubility of CO2 and Solubility of O2 - Dependent variable

Explanation:

There are always two variables in an experiment: Independent and dependent variables.

Independent variables are defined as the variables that can be controlled or changed to measure its effect on the dependent variable and the dependent variable is influenced by the change in Independent variables.

In the given example, the temperature is the Independent variable and the solubility of CO2 and Solubility of O2 is the dependent variable because the solubility of CO2 and O2 decreases as temperature increases.

Hence, the correct answer is:

Temperature - Independent variable

The solubility of CO2 and Solubility of O2 - Dependent variable

The space shuttle heats up during reentry. Which term best describes what is causing
this?
O friction
O gravity
O acceleration
o velocity

Answers

The answer is Velocity .


ANALYZE Define a system you interact with every day. Is the system
open, closed, or isolated? How do matter and energy flow into, out
of, or within the system?

Answers

Answer:

 A system that we use daily or almost every day is, for example, when boiling water for cooking.

Explanation:

This is the case of an open system.

Boiling water in a pot without a lid, exchanges heat energy and mixes with its surroundings when it enters a gaseous state.

The energy introduced into the system by the fire transforms the water into gas, which is released back into the environment. Without that constant heat injection, the water will stop boiling; and without room to get out, the steam (matter) will increase the pressure until the pot burst.

You can find examples like these anywhere, knowing the definition of each system:

Open systems. The most predominant of all, are characterized by exchanging energy and / or matter with the environment that surrounds them, either taking from it, expelling towards it or both. Closed systems. Unlike the previous ones, they exchange energy (heat, work) with the outside, but never matter (their mass remains intact). Isolated systems. They are so called because they do not exchange energy or matter of any kind with their environment, they are considered a system disconnected from the dynamics around them. Completely isolated systems do not really exist in the universe, so they are considered cases of abstraction in determined periods of time. They are assumed in thermodynamic equilibrium.

recall what you have learned about continental drift and tectonics. sort the information into the correct categories

Answers

Answer: Continental Drift - Pangea broke and spread apart, Continents were once landmass

Plate Tectonics - Lithosphere is made of large pieces, Plates move and interact, Landforms result from moving plates.

Explanation: Your welcome.

Answer:

Just for the persons that want to be sure.

How many orbital shells does period 4 contain?

Answers

Answer:

it contains 30 orbitals

Hey is plasma a state of matter
Yes or no
I will mark you brainliest

Answers

Answer:

no

Explanation:

Convert 34.5ml to L It has to be done in dimensional analysis with correct significant digits.

Answers

Answer:

0.0345L

Explanation:

:)

Write 750,000 in scientific notation

Answers

Answer:

Explanation:

scientific notation of 750000 is

7.5*10^5

A sample of platinum has a mass of 16.1 g and a volume of 0.75 cm^3. What is the density of platinum?

Answers

Answer:
21.4666666667 g/cm^3

Explanation:
The density of a substance can be found by dividing the mass by the volume.
d=m/v
The mass of the sample is 16.1 grams and the volume is 0.75 cubic centimeters.
m= 16.1 g
v=0.75 cm^3
Substitute the values into the formula.
d=16.1 g / 0.75 cm^3
Divide
d= 21.4666666667 g/cm^3

The density of platinum is 21.4666666667 grams per cubic centimeter.

What does the word homogenous mean?

Answers

Answer:

Homogeneous means composed of parts of different kinds; having widely different elements or components.

Explanation:

under the same conditions of temperature and pressure, three different samples of the same uniform
a. shape
b. density
c. mass
d. volume

Answers

Answer: B

Explanation: Have to be careful here.Clearly, the samples could have different mass, and COULD have different volume and they could be either solid, liquid or gas.

Strawberry Hope: "Hey Strawberry Cow here! Hope this helps! Hope you have a great afternoon!"

~Strawberry Cow~

Under the same conditions of temperature and pressure, three different samples of the same uniform shape.

The density of a substance is in intrinsic property. Irrespective of the temperature and pressure or any other condition, the density of a substance will not change.

Mass is the quantity of matter in a substance and it is not affected by the temperature or pressure of the object.

The volume of the a substance changes with change in temperature and pressure but we have been told that these conditions are the same so the volume of the object does not change.

However, if the objects are exactly uniform, at the same temperature and pressure, the objects will have the same shape.

Learn more: https://brainly.com/question/9196460

An earthquake on the ocean floor produced a giant wave called a tsunami. The tsunami traveled through the ocean and hit a remote island, causing a lot of damage. Is the water that hit the island the same water that was above the earthquake on the ocean floor?

Answers

Answer:

Yes

Explanation:

What cause an earthquake is when the earth plates shift and if theirs a drop in the tentonic plates a ripple effect like when you drop something in water will occur. The plates shift down the water in which the plate shift down the water will go in that direction due to gravity, but instead of equalizing the water will pick up some speed and velocity and begin to form a wave now. When an tsunami happens you know it coming cause the water moves back cause the water is picking up to much speed and due to cohesion its moves along with the move water and builds up. Creating a massive tidal wave known as tsunamis.

The water that hit the island is not the same water that was above the earthquake on the ocean floor. Waves transfer energy not matter.

It should be noted that the earthquake on the ocean floor that produces a giant wave referred to as a tsunami is quite different from the water that hits a remote island, causing a lot of damage.

It should be noted that waves transfer energy but not matter. While waves are able to transfer energy over a particular distance, it doesn't move the matter along the same distance.

For example, it should be noted that an ocean wave is able to travel for several kilometers while the water itself doesn't move.

In conclusion, waves transfer energy not matter.

Read related link on:

https://brainly.com/question/24673995

Of these non-metals which one is likely to be least reactive

Answers

Answer:

the answer is the swecond option

Explanation:

Its b ur well come

Which of these has the lowest first-ionization energy?

A) Cs
B) Ag
C) Pb
D) Br
E) Se

Answers

Answer:

Francium is the answer

The answer is A) Cs because the Ionization for Cs is 3,8939
Other Questions
77 meter=_____dm ? Can someone help ? Solve for LP = 2L + 2W breakdown -3r+9= -4r+5 Please help, What (x+y)(x-y) Which of the following scenarios is avelocity?A. A car drives 20 kph southwest.B. An airplane flies at 200 mph.C. A boat moves through the water at 20 mph.D. A bike moves at 7 m/s. i need help!!what is the slope of the line shown below Points are identified in pictures by Please help.. thanks if you do :) *) Which of the following numbers is 90 divisible by? Which is NOT characteristic of addictive behavior?forelapse and remissionO cravingignoring the risk of the behaviorO impulse control when was sermon written and where? Find and fix each mistake in the following equilibrium constant expressions.Part A2H2S(g)?2H2(g)+S2(g)Keq=[H2][S2][H2S]a. Keq=[H2S]^2/[H2]2[S2]b. Keq=[H2S]/[H2][S2]c. Keq=[H2]^2[S2]/[H2S]^2Part BCO(g)+Cl2(g)?COCl2(g)Keq=[CO][Cl2][COCl2]a. Keq=[CO][Cl2]^2/[COCl2]^2b. Keq=[COCl2]/[CO][Cl2]c. Keq=[COCl2]^2/[CO][Cl2]^2 4 x (50 1)4 x 5050 - 4 x 1- what does soil come from Please help!! I need this Explain why the decision to allow barbarians to enlist in the Roman military might have contributed to the fall of the Roman Empire Which is the closest synonym for the word reform? ITS ALMOST DUEE Ill brainlist According to the systems perspective, transformational processes are responsible for turning:_____. What is the difference between mass and weight?A)Mass measures the force of gravity and weight measures volume.B)Mass is measured in metric units and weight is measured in US Standard System.C)Mass measures amount of matter in an object and weight measures the force of gravity.D)Mass measures volume and weight measures the force of gravity.