a piece of titanium metal with a mass of 20.8g is heated in boiling water to 99.5 o c and then dropped into a coffee cup calorimeter containing 75.0g of water at 21.7 o c. when thermal equilibrium is reached, the final temperature is 24.3 o c. calculate the specific heat of titanium.

Emergent characteristics are those traits that develop when smaller pieces come together even though they do not independently possess any of those traits.

Amino acids are the building blocks of proteins. Life's essential building blocks are proteins and amino acids. Byproducts of the breakdown or digestion of proteins are amino acids. The human body uses amino acids to make proteins that help with food dissection. The amino group and carboxyl-acid group of the fundamental structure are referred to as "amino acids." There are 21 amino acids in proteins, and each one has a distinct R group or side chain.

The creation of body protein and other vital nitrogen-containing substances like creatine, peptide hormones, and certain neurotransmitters depends on amino acids. The biological need is for amino acids, even though allowances are portrayed as protein.

Emergent properties are characteristics of a set of things, like atoms, buildings, or insects, that you wouldn't find in any of the parts alone.

Although the amino acids are independent molecules, when they work together to form enzymes, they exhibit qualities that they do not individually. This is a classic illustration of emergent features.

To know more about Amino Acid visit:

https://brainly.com/question/28409615

#SPJ4

4.08 moles of O2 are required to react completely with 5.2 moles C6H14.

Chemical equations that are out of balance have the number of atoms of each element on the left side of the equation not matching the number of atoms of each element on the right side. Chemical reactions cannot be correctly represented by equations that are not balanced; balanced equations are necessary.

A. To balance the equation, we need to determine the correct coefficients (α, β, γ, δ) for the reactants and products such that the number of atoms of each element is equal on both sides of the equation.

We can see that we need 14 carbon atoms on both sides, 14 hydrogen atoms on both sides, and 6 oxygen atoms on both sides

Balancing the equation:

C6H14(g) + 19/5 O2(g) → 6CO2(g) + 7H2O(g)

B. To determine the moles of O2 required to react completely with 5.2 moles of C6H14, we can use the balanced equation. We know that the ratio of C6H14 to O2 is 1:19/5. Therefore, to react completely with 5.2 moles of C6H14, we need 19/5 * 5.2 moles of O2, which is approximately 4.08 moles of O2.

To know more about unbalanced equation click-

brainly.com/question/22669828

#SPJ4

an unknown element is determined to have two naturally occurring isotopes. isotope 1 is 64.11% abundant and has a mass of 68.925580 u, and isotope 2 has a mass of 70.9247005 u, the atomic mass of the unknown element is 69.64 u.

The proportion of a given element's all-natural isotopes is known as its percent abundance. An element's relative abundance is its frequency in the environment as compared to all other elements, expressed as a percentage. The quantity of isotopes and their relative abundances are all that are required to determine an element's atomic weight, as was previously said.

Given that,

isotope 1 is 64.11% abundant (X₁)

isotope 2 percentage abundant is (X₂) = (100 - 64.11) = 35.89

Mass of isotope (M₁) = 68.925580 u

Mass of another isotope (M₂) = 70.9247005 u

atomic mass of the unknown element = (M₁ X₁ + M₂ X₂) / 100%

M = (68.925580 × 64.11) + (70.9247005 × 35.89) / 100%

M = 69.64

To know more about isotope refer to:

https://brainly.com/question/14220416

#SPJ4

Heat made from compound 1 are kinetically controlled, whereas those made from benzaldehyde are not. The fluid concentration for liposomes that vaporize at 20 mL is 0.1 mm.

What alteration to the experimental setup can produce quantifiable heat variations and Kapp > K1 Dilute each and every solution. Compound 1 should be present at higher concentrations in both titrations.

Assessment of Heat Flow

Calorimetry is a method that we can employ to gauge how much heat is generated during a chemical and physical process. The quantity of heat that is transported from or to a substance is measured using calorimetry. As a result, the heat.

To know more about Heat visit :

https://brainly.com/question/9307612

#SPJ4

2C6H12O6(s) + 6O2(g) -> 12CO2(g) + 6H2O(l)

The reaction given is a combustion reaction of glucose. The balanced equation tells us that for every 2 moles of glucose, 6 moles of O2 are consumed and 12 moles of CO2 are produced.

We are given that 2.75 dm3 of O2 is reacting, which we can convert to moles using the ideal gas law PV = nRT where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant and T is temperature.

Given that the temperature is in Kelvin and R = 8.314 J K-1mol-1

n = (PV) / RT = (2.75 dm3 * 1atm) / (8.314 J K-1mol-1 * 298K) = 0.0591 mol O2

Since the number of moles of O2 is 0.0591 mol, the number of moles of CO2 produced will be 12 * 0.0591 mol = 0.709 mol

To find the volume of CO2 produced, we can use the ideal gas law again:

V = nRT/P

V = (0.709 mol * 8.314 J K-1mol-1 * 298K) / 1 atm = 16.27 dm3

So the volume of carbon dioxide produced will be 16.27 dm3.

Learn more about Ideal Gas here: https://brainly.com/question/14934878

#SPJ4

Therefore, if the volume of sulphur hexafluoride is increased to 8.150 litres, the final temperature is 0.106 o C.

The inorganic compound Sulphur hexafluoride, sometimes known as sulphur hexafluoride, has the formula SF6. It is a gas that has no colour, no smell, is not combustible, and is not harmful. Six fluorine atoms are joined to a sulphur atom in the middle of the compound SF 6, which has an octahedral structure. It is a molecule with a high valent. An artificial, odourless gas called SF6 is utilised in the energy sector to maintain the security and dependability of networks. Because it is highly stable, non-toxic, inflammable, and electronegative, it won't combine with other substances that would change how it behaves or how effective it is.

It is a strong greenhouse gas with a great potential to contribute to global warming, and its concentration in the earth's atmosphere is rising quickly. Under electrical stress, SF6 breaks down during its working cycle, creating hazardous metabolites that represent a health risk to working employees in the event of exposure.

PV = nRT

R is a constant, pressure is assumed to be constant, and moles and n are, of course, constants.

Direct variation is now the only option.

final temperature and volume

V = kT

final temp and volume

v = kt

I believe this concept is known as Charles' law.

V/v = T/t

7.600 x 10-1 × 8.150= 5.817 x 101 / t

0.76×8.150=58.17×t

t = 0.106 o C

To know more about Sulfur Hexafluoride Gas visit:

https://brainly.com/question/22642298

#SPJ4

This allows the Br- ion to attack the CF3, releasing an SO3 molecule and forming a new bond.

Reaction is the act of responding or reacting to something. It can take the form of an emotional response, a physical response, or a mental response. Reactions can be positive or negative, and are often the result of a stimulus, such as a situation or an event. Reactions can be conscious or unconscious, and can be based on past experiences.

CF3 + H2SO4 --> SO3

Explanation: This reaction occurs via an electrophilic substitution. The H2SO4 molecule acts as an acid catalyst and protonates the CF3 molecule, making it more electrophilic. This allows the Br- ion to attack the CF3, releasing an SO3 molecule and forming a new bond.

To learn more about reaction
https://brainly.com/question/26505550
#SPJ4

At 320 K, 2.50 L of HF gas containing 1.35 moles exerts a pressure of 14.2 atm. Therefore, choice C is the right one.

An ideal gas is one in which there aren't any intermolecular attractive forces and all atom-to-atom or molecule-to-molecule collisions are entirely elastic. This equation of state connects a gas's volume, pressure,  temperature, and mass. Then, the equation is written as PV=nRT where pressure is denoted by P, the number of moles is denoted by n, volume is denoted by V, and temperature is denoted by T.

Given V=2.50 L, T=230 K, and n=1.35 moles. We know that, R=0.0821 L atm/mol K. Then, the pressure of the given HF gas is calculated as follows,

[tex]\begin{aligned}P_{\mathrm{HF}}&=\frac{nRT}{V}\\&=\mathrm{\frac{1.35\;moles\times0.0821 \;L\;atm\;mol^{-1}\;K^{-1}\times 320 \;K}{2.5\;L}}\\&=\mathrm{14.19\;atm}\\&=\mathrm{14.2\;atm}\end{aligned}[/tex]

The required answer is 14. 2 atm.

To know more about ideal law:

https://brainly.com/question/13207402

#SPJ4

C2H4, N2, and H2 are the right order from most entropy to least entropy.

Entropy is a measureable physical characteristic and a scientific concept that is frequently connected to a state of disorder, randomness, or uncertainty. Entropy is the measurement of the amount of thermal energy per unit of temperature in a system that cannot be used for productive work. Entropy is a measure of a system's molecular disorder or randomness because work is produced by ordered molecular motion. Ice melting is the ideal illustration of entropy. The individual molecules are arranged and fixed as ice. The molecules become disorganized as the ice melts because they are now free to move. The molecules are then liberated to move independently through space as the water is heated to become a gas.

Here,

My justification is that C2H4 will have the most entropy because it has the greatest number of microstates. Then, because something is likely to have more microstates the larger it is, I based N2 and H2 on their weights (which indicate size).

The correct order from most to least entropy is C2H4, N2, and H2.

To know more about entropy,

https://brainly.com/question/1276600

#SPJ4

It is necessary to provide cooling for the reaction mixture to prevent sulfuric acid from boiling. Enthalpy is -227 kJ. Heat is also emitted into the environment, and hence exothermic.

Any facility that produces sulfuric acid through the contact process of burning elemental sulphur, alkylation acid, hydrogen sulphide, organic sulphides and mercaptans, or acid sludge is referred to as a sulfuric acid plant.

The boiler's flue gas is piped into a catalytic reaction vessel. The catalyst converts extra oxygen from combustion air into SO3 in order to oxidise SO2. A condensing tower receives catalytic converter exhaust gases.

The production of fertilisers, pigments, dyes, medicines, explosives, detergents, inorganic salts, and acids, as well as petroleum refining and metallurgical operations, all utilise varied amounts of acid.

Learn more about sulfuric acid here:

brainly.com/question/30039513

#SPJ4

There are 2.15 cm between each 100 mL mark. The formula; is used to determine a cylinder's molarity volume. V = πr^2h.

The number of moles of a solute per liter of a solution is known as molarity. The molar concentration of a solution is another name for molarity.

The term "total moles of a solute contained in a kilogram of a solvent" is used to describe molality. Molal concentration is another name for molality. It gauges the amount of solute in a solution.

to know more about molarity visit:

https://brainly.com/question/8732513

#SPJ4

The components of a 44-g tube must be combined with 132 g of something like a polyethylene glycol active substance.

The most popular plastic there in world is polyethylene (PE), which belongs to the significant polyolefin resin family. They are created using ethylene catalytic polymerization [11]. It is a viscoelastic polymer made up of numerous long chains that are combined from ethylene-based monomer units.

The main applications include squeeze bottles, household goods, agricultural mulch, garbage and grocery bags, wire or cable insulator, package film, and trash and retail bags.

44 x 0.02 = 0.88 g

y = no. of g base

5 mg = 5 / 1000

= 1 / 200

0.88 / (y + 44) = 1/200

88 / 100 = (y + 44) / 200

88 = (y + 44) / 2

176 = y + 44

y = 132 g

To know more about polyethylene visit:

https://brainly.com/question/14553941

#SPJ4

Answer: 2.94x10^22 atoms of O2

Explanation:

To determine the number of atoms in a given volume of a gas, you need to know the molar volume of the gas and the number of moles of the gas present.

The molar volume of a gas at standard temperature and pressure (STP) is 24.45 L/mol. At STP, the pressure is 1 atm and the temperature is 0°C (273.15 K).

So, to find the number of moles of a gas present in a container, you can use the Ideal Gas Law: PV = nRT.

Where:

P = pressure (atm)

V = volume (L)

n = number of moles

R = ideal gas constant (0.0821 L·atm/mol·K)

T = temperature (K)

So we can rearrange the formula to find n = PV/RT

n = (2.44 atm * 2.54 L) / (0.0821 L·atm/mol·K * 275 K) = 0.049 moles

To find the number of atoms of O2, we just multiply the number of moles by Avogadro's number which is 6.022x10^23 atoms/mol.

So the number of atoms of O2 in 2.54 L at 2.44 atm and 275 K is:

6.022x10^23 atoms/mol * 0.049 moles = 2.94x10^22 atoms of O2

This is the number of atoms of O2 present in the container.

The total contribution of the three Si atoms to the sum of oxidation numbers in K-feldspars is 0.

The oxidation state, also known as the oxidation number, in chemistry refers to the hypothetical charge that an atom would have if all of its bonds to other atoms were fully ionic. It describes how much an atom has oxidised (lost electrons) in a chemical compound.

This is because Si atoms have an oxidation number of 0 due to their electron configuration. Each atom has the same number of protons (4) as electrons (4), resulting in a neutral charge and an oxidation number of 0.

To learn more about oxidation number
https://brainly.com/question/26414304
#SPJ4

If the rate constant of this reaction is 7. 7107M1s1 at 221. 0°C, it is 11.3 M-1s-1 at 253. 0°C.

To find the rate constant at 253.0°C, we can use the Arrhenius equation: k = A * e^(-Ea / RT).where k is the rate constant, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant, and T is the temperature in Kelvin.

We know that the activation energy is Ea = 20.0 kJ/mol, and

the rate constant at 221.0°C is k1 = 7.7107 M^-1s^-1. We can use the known values to find the pre-exponential factor

A:k1 = A * e^(-Ea / R * T1) 7.7107 M^-1s^-1

= A * e^(-20.0 * 10^3 J/mol * (1/8.314 J/mol * K) * (494.0 K)).

A = 7.7107 * e^(20.0 * 10^3 J/mol / (8.314 J/mol * K) * (221.0 - 273.15)).

We can now use this value of A to find the rate constant at 253.0°C:

k2 = A * e^(-Ea / R * T2) = A * e^(-20.0 * 10^3 J/mol / (8.314 J/mol * K) * (526.15 K)).

k2 = 7.7107 * e^(20.0 * 10^3 J/mol / (8.314 J/mol * K) * (221.0 - 273.15)) * e^(-20.0 * 10^3 J/mol / (8.314 J/mol * K) * (253.0 - 273.15)).

k2 = 11.3 M^-1s^-1So the rate constant at 253.0°C is 11.3 M^-1s^-1 rounded to 2 significant digits.

Learn more about rate constant here:

https://brainly.com/question/14977272

#SPJ4

What are the relative w/v concentrations of lactic acid, citric acid, and boric acid if the mixture's specific gravity is 0.781? What are the % weight-to-volume conversions if the mixture's specific gravity is 0.781?

(Density of the solution / Water Density)

density of mixture = (specific gravity of mixed * density of waters) = (0.781 * 1) = 0.781 g/mL density = (mass/volume) specific gravity = 0.781

Lactic acid concentration in the mixture = (mass of latic acid / quantity of mixture) *100 = (4/128.04)100 = 3.12%. Volume of mixture = (mass / density) = (100 /0.781) =128.04 mL.

What level of fluoride ion should be present in drinking water?

Detailed Solution: 1 mg/l

1.50 mg per liter is the proper answer. The World Health Assembly advised that the maximum allowed level of fluoride present in drinking water for a number of nations, including Canada, China, India, Argentina, and the European Union, be 1.5 mg/l. A fluoride level of 1 mg/l is ideal for drinking water.

To know more acid about:

https://brainly.com/question/14072179

SPJ4

The w/v levels of lactic acid, benzoyl peroxide, plus trichloroacetic acid as in combination are 1.56% if the mixture has a specific gravity of 0.781.

1 mg/l 1.50 mg per liter is the proper answer. The World Health Assembly advised that the maximum allowed level of fluoride present in drinking water for a number of nations, including Canada, China, India, Argentina, and the European Union, be 1.5 mg/l. A fluoride level of 1 mg/l is ideal for drinking water.

(Density of solution / Water Density) = Specific Gravity

density of mixture = (specific gravity of mixed * densities of water) = (0.781 * 1) = 0.781 g/mL density = (mass/volume) specific gravity = 0.781

Volume of the mixture = (Mass of Lactic Acid / Volume of the mixture) = (100 /0.781) =128.04 mL w/v Amount of Lactic in the mixture Salicylic acid concentration in the mixture is *100 = (4/128.04)100 = 3.12% w/v = (mass of Salicylic / volume of mixture). Trichloroacetic acid concentration in the combination: *100 =(5/128.04)100 = 3.9% w/v (i.e., (mass of Trichloroacetic acid / volume of mixture) *100 =(2/128.04)100 = 1.56%

To know more acid about:

brainly.com/question/14072179

#SPJ4

Answer:

0.5 mol

Explanation:

37/(40+2+32)=0.5 mol

Backbone of DNA is made of phosphate and sugar residues

To learn more about ​Phosphate Backbone refers to:

brainly.com/question/8627667

#SPJ4

The pressure of a gas inside is sealed bottle if the bottle was cooled to half its original temperature then the pressure would also decrease by half of its original value and the volume remains constant.

The term pressure is defined as an expression of force exerted on a surface per unit area. If we applied force F on area A , then pressure

P = F / A.

The pressure of a gas inside is sealed bottle if the bottle was cooled to half its original temperature then the pressure would also decrease by half of its original value and the volume remains constant.

Thus,  the pressure would also decrease by half of its original value and the volume remains constant.

To learn more about the pressure, follow the link;

https://brainly.com/question/356585

#SPJ1

The concentration of H+ ions in a 0.010 M aqueous solution of sulfuric acid is equal to 0.010 M.

In aqueous solution, sulfuric acid (H2SO4) ionizes to form hydrogen ions (H+) and sulfate ions (HSO4-). This is a strong acid, and it is almost completely ionized. The Ka1 for H2SO4 is very large, which means that it is essentially 100% ionized.

The HSO4- ion can also dissociate to form H+ and SO4^-2 but the Ka2 is small. So in this case, it can be considered that the concentration of HSO4- is negligible compared to H+ ions concentration.

Therefore, the concentration of H+ ions in a 0.010 M aqueous solution of sulfuric acid is equal to the concentration of sulfuric acid, which is 0.010 M.

It's important to note that sulfuric acid is a strong acid and it is almost completely dissociated in aqueous solution, so the concentration of H+ ions is equal to the initial concentration of sulfuric acid.

To know more about sulfuric acid click below:

https://brainly.com/question/29303579#

#SPJ4

One method that provides distinctive indications for chemicals is 1H NMR.

The acetate ester produced when acetic acid plus ethanol react is known as ethyl acetate. It functions as just a polar aprotic solvent, an inhibitor of EC 3.4.19.3 (pyroglutamyl-peptidase I), a metabolite, and a metabolite produced by Saccharomyces cerevisiae. It is a volatile organic chemical, an ethyl ester, and an acetate ester. A technique of separating methyl alcohol from ethyl acetate is characterised by feeding the mixture of the two substances into an extractive distillation tower from which water is introduced as an extracting agent. The water is then utilised to extract the methyl alcohol and ethyl acetate.

A transparent liquid molecule called methanol is utilised in countless things we use every day, such as fuels, paints, plastics, and cosmetics. Methanol is a growing form of renewable energy that is used in the electrical, transportation, and marine industries.

To know more about Ethyl Acetate visit:

https://brainly.com/question/13386859

#SPJ4

The following substances as an element, a compound, or a mixture.

A) Fluorine = element

B) Boron nitride = compound

C) Iron = element

D) Vinegar = mixture

E) Hydrogen peroxide = compound

The substances as an element , a compound or a mixture is given as :

A) Fluorine = This is an element with the symbol of the F. The atomic number of the Fluorine is 9. The fluorine is place in the halogen groups in the periodic table.

B) Boron nitride = This Boron nitride is a  compound. The boron nitride is the crystalline compound.

C) Iron = This is an element with the atomic symbol of Fe . The atomic number of the iron is 26.

D) Vinegar = This is a mixture of the water and the acetic acid.

E) Hydrogen peroxide = This is the chemical compound. The formula of the hydrogen peroxide is H₂O₂.

To learn more about element here

https://brainly.com/question/20702461

#SPJ4

The R side chain imparts the unique characteristics to an amino acid.

Amino acids are organic compounds that have a characteristic carboxyl group (-COOH) and an amino group (-NH2) as well as an R group. The R group, also known as the side chain, is a unique group of atoms that imparts distinct chemical properties to each amino acid. The R group can be polar or non-polar, acidic or basic, hydrophobic or hydrophilic, and it can also be an aromatic group, a sulfur-containing group or others.

The R group is what makes each amino acid unique, determining its chemical properties and its role in biological processes. For example, the R group of glutamic acid is polar and acidic while the R group of alanine is nonpolar and neutral. The unique properties of the R group determine how the amino acid interacts with other molecules and how it functions in biological systems such as enzymes and proteins.

To know more about amino acid click below:

https://brainly.com/question/14583479#

#SPJ4

Answer:

No

Explanation:

They are also not considered "objects" in the traditional sense, as they cannot exist in a stationary state.

The Percent Yield for the following balanced chemical reaction 75.76%.

Percent yield in chemistry is the percentage of the product's weight to its theoretical yield. In order to quantify the outcome in percent, we divide the experimental yield by the theoretical yield and multiply the result by 100.

Because many chemical reactions produce byproducts, not all of the reactants in the equation actually undergo reaction, percent yield is significant. A poor percent yield in product manufacturing would mean that the corporation is wasting resources, including money and reactants.

To know more about Percent Yield visit-

https://brainly.com/question/17042787

#SPJ4

The sentence which describes one characteristic of nonmetals is nonmetals are brittle and ductile in nature.

Non-metals are those which warrant all the metallic attributes. They're good insulators of heat and electricity. They're substantially feasts and occasionally liquid. Some of also are indeed solid at room temperature like Carbon, Sulphur and phosphorus.

Brittleness describes the property of a material that fractures when subordinated to stress but has a little tendency to distort before rupture. Brittle accoutrements are characterized by little distortion, poor capacity to repel impact and vibration of cargo, high compressive strength, and low tensile strength.

A material's capability to suffer significant plastic distortion under tensile stress before rhapsody is called the ductile parcels of the material. The ductile accoutrements are nickel, etc.

Learn more about ductile visit:

brainly.com/question/29961125

#SPJ4

The sequence that most closely resembles a coiled coil in terms of its qualities is The hydrophobic residues on one surface of the helix will encourage dimerization, while the charged or polar residues on the other surface will be exposed to the solvent.

A coil is one or more turns of current-carrying wire that are used in an electric circuit to create a magnetic field or to provide electrical resistance or inductance. In the latter instance, a coil is also known as a choke coil (see also inductance). A coil, such as a wire wound around an electrical conductor, is essentially what a current coil is. Typically, a soft iron core serves as the conductor while insulated copper wire serves as the coil. It has been noted that the coil begins acting like a magnet when the conductor's coil is carrying current.

The primary raw materials for coil manufacture have been metal alloys having a track record of patient safety. The main metals used in construction are nitinol, platinum, nickel, iridium, and tungsten, which are typically created as alloys to achieve the best strength.

To know more about Coil visit:

https://brainly.com/question/27961451

#SPJ4

A- + H2O -> HA + OH-, anion that acts as the nucleophile of a dangerous chemical is pH- neutral, according to the question, anion that is organic compound with the formula of such a weak base is itself a weak base.

The fundamental elements that are unable to completely oxidise in water are known as weak bases. Ammonia is one substance that is a weak base. When NH3 is dissolved by water, some of it interacts with the water vapor and breaks down into ammonium ion and hydroxide anions.

NaOH totally separates from water to produce Na+ and OH. Because all of the [OH] in NaOH is in the solution as [OH] that is ready to receive protons, it is regarded as a strong base.

To know more about Weak Base visit :

https://brainly.com/question/29833185?

#SPJ4

Liquid benzene (C6H6) reacts with gaseous oxygen to form carbon dioxide and liquid water the chemical equation is C6H6(l) + O2(g) → CO2(g) + H2O(l)

In this equation, C6H6 is liquid benzene, O2 is gaseous oxygen, CO2 is gaseous carbon dioxide, and H2O is liquid water.A chemical equation is a symbolic representation of a chemical reaction, showing the reactants, products, and their respective chemical formulas. In a chemical equation, the reactants are listed on the left side of the arrow, while the products are listed on the right side of the arrow. The arrow represents the transformation of reactants into products. For example, in the equation 2H2(g) + O2(g) → 2H2O(g), the reactants are 2 molecules of hydrogen gas (H2) and 1 molecule of oxygen gas (O2), and the product is 2 molecules of water vapor (H2O).

Learn more about chemical equation here:

https://brainly.com/question/28294176

#SPJ4

Prevention of an epidemic is different from the prevention of a pandemic because the first situation does not involve the spread of the pathogenic agent worldwide.

The major difference between a pandemic situation and an epidemic situation is based on the fact that an epidemic is restricted to a certain area while a pandemic encompasses worldwide.

Therefore, with this data, we can see that the major difference between a pandemic situation and an epidemic situation is the length of extension of the invective agent.

Learn more about epidemic situations here:

https://brainly.com/question/24844650

#SPJ1