A point charge of 5.0 x 10^-7 C moves to the right at 2.6 x 10^5 m/s in a magnetic field that is directed into the screen and has a field strength of 1.8 x 10^-2 T.
What is the magnitude of the magnetic force acting on the charge?

A. The final temperature of the system is 0°C.

B. The amount of ice (if any) remaining is  0.0331 g

C. The initial temperature of the water that would be enough to just barely melt all of the ice is 20.57 °C.

The specific heat is the amount of heat required to change the temperature by 1°C. It is denoted by C.

Heat lost or gained is represented as

Q = m C ΔT

Given, Mass of ice, mice = 9x10⁻² kg, Mass of water, mw =0.35 kg, T = 13 °C

A. If ice is in excess, final water temperature will be 0°C.

B. Specific heat of water Cp = 1000 cal/kg°C

Latent heat of ice L = 80 kcal/kg

In that case, heat lost by water =Heat gain by ice

Q = mCp x dT = mL

0.35 x 1000 x 13 = m x 80 x 1000

m = 0.0569 kg of ice.

The gram of ice remaining = 0.09 - 0.0569

                                             = 0.0331 gram of ice.

Thus,  the amount of ice remaining is 0.0331 g

C. Heat required to melt 90 gram of ice,  Q  mL

Q = 90 x 80 = 7200 cal.

If the initial temperature of water needed = T,

mCp x dT = mL

350 x T = 7200

T = 20.57 °C

Thus,  the initial temperature of the water that would be enough to just barely melt all of the ice is  20.57 °C.

Learn more about specific heat.

https://brainly.com/question/11297584

#SPJ1

The formula that can be used to obtain a convergent series is given by;

a/1 – r.

In mathematics, we define a series as sum of numbers which could be convergent or divergent. In a convergent series, the summation of the numbers approaches a given value.

The formula that can be used to obtain a convergent series is given by;

a/1 – r.

Learn more about a convergent series:https://brainly.com/question/15415793?

#SPJ11

The degree measure of angle ∠ bac will be 70°. Option C is correct.

The angle is the distance between the intersecting lines or surfaces. In addition, the angle is expressed in degrees. The angle is 360 degrees for a full revolution.

Given expression;

[tex]\rm cos^{-1}(\frac{3.4}{10})=x \\\\ x = cos^{-1}(0.34) \\\\ x = 70.12^0[/tex]

The degree measure of angle ∠bac will be 70°.

Hence option C is correct.

To learn more about the angle, refer to

https://brainly.com/question/15767203.

#SPJ1

Answer:

70 Degrees

Explanation:

Geometry B E2020!! :3

Answer:

The change in time for the first quarter is  seconds.  = 2.07

The change in time for the second quarter is  seconds.

=1.09

The change in time for the third quarter is  seconds.

=0.95

The change in time for the fourth quarter is  seconds.=0.81

Explanation:

Hope this helped.

Answer

100% - double

200% - triple

300% - 4X

For a 300% increase the KE must be 4 time as large

KE2 / KE1 = M V2^2 / M V1^2 = (V1 / V2)^2 = 4

So V2 = 2 V1 for the requested increase

M V2 / M V1 = V2 / V1 = 2

So the momentum would double for a 100% increase

The specific heat capacity of iron is greater than that of lead hence the iron will melt the ice more than the lead.

The specific heat capacity refers to the amount of heat that is required to raise the temperature of 1Kg of a body by 1 K.

We know that the specific heat capacity of iron is greater than that of lead hence the iron will melt the ice more than the lead.

Learn more about heat capacity:https://brainly.com/question/13499849

#SPJ1

Answer:

15.29 kg

Explanation:

F = k * d                  5cm = .05 m

 = 3 x 10^3  n/m     *   .05 m  = 150 N

                                                =  150 kg -m / s^2

150 kg- m / s^2   / 9.81 m/s^2 =15.29kg

Answer:

D

Explanation:

PCN was discovered in mold

Answer:

This process is CONDENSATION

Explanation:

Condensation occurs when water vapour loses some of its kinetic energy to a colder body and changes into liquid state.

Answer:

a single closed path of electrical components including a voltage source

Answer:

natural is the answer

Friction is a natural force which exist

Momentum is the rate of increase in speed or decrease in speed after application of force

The formula is given by

p is momentum

m is mass

v is velocity

The statement which best describes Deena's error is: B. Include the area of the rectangle under the line to find displacement for constant acceleration.

A velocity vs. time graph can be defined as a type of graph that is used to graphically represent the rate of change of velocity of an object with respect to time.

Based on the information provided in the table shown (see attachment), the statement which best describes Deena's error is her not including of the area of the rectangle under the line, so as to enable her find displacement for constant acceleration.

Read more on acceleration here: brainly.com/question/24728358

#SPJ1

Complete Question:

Deena made a chart to summarize features of a velocity vs. time graph for objects with constant acceleration and objects with constant velocity.

Which best describes Deena's error?

A. The line for constant velocity is not horizontal; it is diagonal and slopes downward.

B. Include the area of the rectangle under the line to find displacement for constant acceleration.

C. Find acceleration by finding the area of the rectangle above the line.

D. Find velocity by calculating the slope of the line.

The energy input would it take to climb a ladder will be 20000 J.

Mechanical advantage is a measure of the ratio of output force to input force in a system, it is used to obtain the efficiency of the given mechanical machine.

Mechanical advantage is a measure of how much a machine multiplies the input force.

The complete question is;

"if we assume a typical efficiency of 25% for the human body how much energy input would it take to climb a ladder increasing body potential energy by 5000J"

The formula for the efficiency is;

[tex]\rm E = \frac{P}{\eta} \\\\ E = \frac{5000}{0.25} \\\\ E = 20000 \ J[/tex]

Hence, the energy input would it take to climb a ladder will be 20000 J.

To learn more about the mechanical advantage, refer to the link;

https://brainly.com/question/7638820

#SPJ1

Answer:2140 watts x 6 hours =12.84 kWh. Are you looking for specific type units such as Jules?

Answer:

convex lense

Explanation:

people with hyperopia or hypermetropia are long sighted or farsighted, so what happens here is that light doesn't focus on the surface of the retina but behind it so the picture is moved forward by positioning a convex lense in front of a hypermetropic eye and is correctly centered in the retina.

Answer:

Actually, the correct answer is D. The system releases 75 J of heat, and its volume doubles.

Explanation:

I took this computer-scored test, and while I was stuck on this answer for a while, I was able to get 100%. This was my thought process:

We know that molecular motion increases with an increase in temperature, because collisions increase. For that reason, for molecular motion to decrease in a system, as the question states, the system must RELEASE heat and decrease in temperature.  Additionally, when a system's volume is smaller, its molecular motion increases. This is because the molecules hit the container more easily and more often. If the volume is halved then, the molecules would have MORE motion, which we aren't looking for in this question! Therefore, the volume must DOUBLE so that less molecular motion takes place. The answer is D! :)

Answer:

[tex]\fbox {3.6kW}[/tex]

Explanation:

Formula used :

[tex]\boxed {P = F \times v} \leftarrow \rightarrow \boxed {P = \frac{F \times S}{t}}[/tex]

Given :

⇒ F = 6 × 10³ N

⇒ S = 18 m

⇒ t = 30 s

Solving :

⇒ P = 6 × 10³ × 18 / 30

⇒ P = 2 × 100 × 18

⇒ P = 3600 W

⇒ P = 3.6kW

Answer:

designing a solution

Explanation:

after knowing & identifying a problem we start putting a solution

Velocity, acceleration, force, and displacement, have magnitude and direction (ie vector quantity) in common

This is a which have both magnitude and direction. Example include:

This is a quantity which has magnitude but no direction. Example include:

From the above, we can see that velocity, acceleration, force, and displacement, have magnitude and direction (ie vector quantity) in common

Learn more about scalar and vector quantity:

https://brainly.com/question/774036

#SPJ12

An example of an object moving in projectile motion is; A basketball being thrown into a net.

Projectile motion is the motion of an object thrown or projected into the air, subject to only the acceleration of gravity.

Now, an example of an object moving in a projectile motion is throwing a basketball into a basketball net in a game. This is because the ball is thrown into the air at an angle towards the net and as such is subject to only acceleration of gravity.

Read more about Projectile Motion at; https://brainly.com/question/24216590

#SPJ12

[tex]\huge\color{Basic}{\boxed{\tt{answer}}}[/tex]

Answer: yes it cannot be 100% efficient

Explanation:

only an ideal machine with 0 friction can have 100 percent efficiency

Given that a ball is thrown into the air and its height in feet after t seconds is given by y = 45t - 15t²,  the instantaneous velocity when t=4 is -75ft/s.

Given that;

First, we determine the derivative of y = 45t - 15t²

y' = (1)45 - (2)15t

y' = 45 - 30t

We substitute in t = 4

y' = 45 - 30t

y' = 45 - 30(4)

y' = 45 - 120

y' = -75ft/s

Given that a ball is thrown into the air and its height in feet after t seconds is given by y = 45t - 15t²,  the instantaneous velocity when t=4 is -75ft/s.

Learn more about velocity here: https://brainly.com/question/2263547

#SPJ12

Answer:

Explanation:

Comment

The main points are that

Solution

               40 miles west

<==========================   0

=====================================================>

                                                  Displacement (30 km east)

Answer

30 km east                

A virtual and erect image is formed by concave mirror.

The focal length of the mirror is the distance between the lens and the image sensor.

It is also defined as the distance from a lens or mirror to the focal point.

It is also stated by the formula

[tex]\frac{1}{y} +\frac{1}{u} = \frac{1}{f}[/tex]

u = -50 cm and f = 0.50 m (50cm)

[tex]\frac{1}{v} +\frac{1}{-50} =\frac{1}{50}[/tex]

v= -50 cm

where - sign shows that image is virtual.

Magnification  m= [tex]\frac{v}{u}[/tex]

m = -50/50

m = 0

hence, virtual and erect image will be formed.

For more Focal length question visit

https://brainly.com/question/16188698

#SPJ1

The total length of the wire required is 63 m.

The current is the stream of charges which flow inside the conductors when connected across the end of voltage.

Given is a solenoid is configured to produce a magnetic field of 0.027T at its center. it has radius 1.4 cm and length 40cm and the wire can carry a maximum current of 12.0 A.

Radius, r = 1.4cm = 0.014 m

Length l = 40 cm = 0.4 m

If the current is I, then the magnetic field in solenoid is given by

B =  μ₀ n I

By substituting the values, we get

0.027 = 4π x 10⁻⁷ x n x 0.4

n = 1792 turns/unit length

Total length of wire = circumference x Turns

L = 2πr x N

where N = nl

Plug the values, we get

L = 2π x 0.014 x1792 x 0.4

L = 63 m

Thus, the total length of the wire is 63 m.

Learn more about current.

brainly.com/question/10677063

#SPJ1

The acceleration of the plane will be −8 m/s²

How to find the acceleration of a plane?

Acceleration is the rate of change in velocity over time (Δv/t).

Given, that the initial velocity of the plane u=480 m/s

The final velocity of the plane is zero after landing, v= 0 m/s

t= 1 minute= 60 seconds

we know, v=u + at

0= 480 + 60a

a=[tex]\frac{-480}{60}[/tex]  = -8m/s²

Thus, the acceleration of the plane is -8 m/s²

(negative acceleration implies that the object is slowing down)

To learn more about acceleration refer to:

https://brainly.com/question/460763

#SPJ10

Taking into account the definition of pH and pOH, the concentration of H⁺ ions at pH=8 is 1×10⁻⁸ M and the concentration of OH⁻ ions at pH=8 is 1×10⁻⁶ M.

pH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.

The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:

pH= - log [H⁺]= - log [H₃O⁺]

Similarly, pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:

pOH= - log [OH⁻]

The following relationship can be established between pH and pOH:

pOH + pH= 14

In this case, pH=8. Replacing in the definition of pH:

8= - log [H⁺]

Solving:

[H⁺]= 10⁻⁸= 1×10⁻⁸ M

Finally, the concentration of H⁺ ions at pH=8 is 1×10⁻⁸ M.

Being pH= 8, pOH is calculated as:

pOH + 8= 14

pOH= 14 - 8

pOH= 6

Replacing in the definition of pOH the concentration of OH⁻ ions is obtained:

- log [OH⁻]= 6

Solving

[OH⁻]= 10⁻⁶= 1×10⁻⁶ M

Finally, the concentration of OH⁻ ions at pH=8 is 1×10⁻⁶ M.

Learn more about pH and pOH:

brainly.com/question/16032912

brainly.com/question/13557815

#SPJ1