a potato contains 20 g of carbohydrates. if carbohydrate has a caloric value of 4 kcal/g, how many kcal are obtained from the carbohydrate in the potato? a. 5 kcal b. 20 kcal c. 40 kcal d. 60 kcal e. 80 kcal

The elements fluorine, F, and sulfur, S, are both found in three different compounds. The concepts outlined there in law of many proportions are supported by these examples.

A material created through the chemical bonding of two or more distinct components. Examples of compounds are potassium salts (NaCl), which is generated from the chemicals both sodium and chloride, as well as freshwater (H2O), which is created from the components both hydrogen and oxygen.

In general, bases are substances that could neutralized a small amount of acid. Chlorine and sodium citrate are both bases even though neither of them includes OH groups.

When a specific mass of S and several quantities of F are combined,

ratio = Compound B and Compound A

= 2,

= 2.375 g/1.188 g

= 2

ratio between the fluorine masses = 3,

= 3.563 g/1.188g

= 3

To know more about compounds visit:

https://brainly.com/question/23846967

#SPJ1

Two common methods to inhibit sugar crystallization in non-crystalline candy making are:

1. adding a small amount of an inverted sugar, such as glucose or corn syrup, to the recipe

2. adding a substance known as a "seed crystal," such as a small amount of already-formed sugar crystals, to the candy mixture during the cooking process.

There was a water loss of 0.33 g (2.815 g - 2.485 g).

The mass of the water lost is now divided by the quantity of hydrate consumed, giving the proportion of water in the compound. After that, doubling this percentage by 100 yields the hydrate's water content in percent.

(0.33 g / 2.815 g)(100) = 11.72 or 12%

The restoration of body fluids lost by sweating, breathing out, and getting rid of waste is known as hydration. Every day, the body loses and replaces roughly 2-3 quarts of water.

According to research, milk is among the finest drinks for hydration, even better than water and sports drinks. Researchers compare milk's benefits to its unique electrolytes, carbohydrate, or cholesterol.

To know more about Hydration visit:

https://brainly.com/question/11202174

#SPJ4

Eliminate the polish. The present product's ledge should be rounded off. Rework and improve enhancement. Buff. Smooth. Clean. Apply primer and nail dehydrator. Put on some liquid and powder.

The right way to apply one-color monomer liquid and polymer powder nail enhancements to natural nails and their tips, Reverse the eponychium. buffed a nail Utilize a nail dehydrator. Put nail primer on. In serrated dapper dishes, add monomer and polymer powder. Brush into monomer liquid and blot excess with paper towel. Brush into powder and coat. Put a pink product in the nail's middle. Form the improvement. Put the second bead on top of the previous one. Free edge may be shaped with mild abrasive. Buffed a nail hand cream and polish from applu.

To learn more about polymer, click here: -

https://brainly.com/question/17354715

#SPJ4

The reason why lead (ii) fluoride has a much higher melting point than tetrafluoromethane is that the number of intermolecular forces that exist between lead (ii) fluoride molecules is greater than those in tetrafluoromethane. Also, the strength of the intermolecular forces that exist between lead (ii) fluoride molecules is greater than those in tetrafluoromethane.

The attracting and repellent forces that develop between the molecules of a substance are referred to as intermolecular forces.

The intermolecular forces that exist in molecules include:

The strongest intermolecular forces are those of the Ion-Dipole Interactions present in lead (ii) fluoride molecules.

Learn more about intermolecular forces at: https://brainly.com/question/2193457

#SPJ1

According to the question: At equilibrium, the concentration of CO3 2- will be 0.16 moles/L.

Equilibrium is a state of balance between two opposing forces. It is a state of rest or balance caused by the equal action of opposing forces. This can be found in many areas of daily life, from the economy to chemical reactions. In economics, equilibrium occurs when supply and demand are equal and in balance, resulting in a market price that does not change.

This is because the reaction of HCO- and CO2 can be described as a simple one-to-one reaction:
HCO- + CO2 <---> H2CO3 <---> H+ + CO3 2-
Since the amount of HCO- and CO2 are equal, the amount of CO3 2- produced will also be equal. Therefore, the equilibrium concentration of CO3 2- will be 0.16 moles/L.

To learn more about equilibrium
https://brainly.com/question/28158922
#SPJ4

ΔS°rxn for the given set of reactions is -146.8 J/K.

A chemical reaction is the chemical conversion of one group of chemical constituents into another. The reaction's standard entropy change (S°rxn) equals the product standard entropies times their stoichiometric coefficients minus the reactant standard entropies times their stoichiometric coefficients. A chemical reaction is a process that changes one or more reactants into one or more products, which are different substances. Substances include, for instance, chemical components or elements.

Here,

Let's consider the following reaction.

2 NO(g) + O₂(g) → 2 NO₂(g)

The reaction's standard entropy change (S°rxn) is equal to the products' standard entropies times their stoichiometric coefficients minus the reactants' standard entropies times their stoichiometric coefficients.

2 mol S°(NO2(g)) = S°rxn +2 mol S°(NO(g)) -1 mol S°(O2(g))

S°rxn = 2 mol 240.0 J/mol.

210.8 J/mol for K - 2 mol.

205.2 J/mol.K - 1 mol

ΔS°rxn = -146.8 J/K

ΔS°rxn for the given set of reactions is -146.8 J/K.

To know more about reaction,

https://brainly.com/question/1619539

#SPJ4

Among the given molecules NO, and SO₂ are polar molecules.

In the field of chemistry, polarity refers to the separation of electric charge that occurs when a molecule or one of its chemical groups has an electric dipole moment. This results in the molecule or group having one end that is negatively charged and the other end that is positively charged.

Because of the disparity in electronegativity between the atoms that are linked together, polar molecules are required to have one or more polar bonds. Molecules that have polar bonds can be devoid of molecular polarity if the bond dipoles are symmetrical and can cancel one other out.

Polar molecules communicate with one another via intermolecular forces known as dipole–dipole interactions and hydrogen bonding. Polarity is the fundamental concept that underpins a variety of different physical properties, such as surface tension, solubility, melting, and boiling temperatures.

Want to know more about polar molecules visit the link which is given below;

https://brainly.com/question/15173422

#SPJ4

Part A: N2(g) + 3H2(g) --> 2NH3(g)

Part C: C(s) + O2(g) --> CO2(g)

Part B: ΔH∘f for NH3(g) is -46.19 kJ/mol.

Part D: ΔH∘f for CO2(g) is -393.51 kJ/mol.

In order to find the standard enthalpy of formation for a substance, we need to determine the enthalpy change that occurs when that substance is formed from its elements in their standard states.

In Part A, we see that the formation of NH3(g) from its elements, nitrogen and hydrogen, results in the reaction N2(g) + 3H2(g) --> 2NH3(g). In Part B, we can use the standard enthalpy of formation value for NH3(g) found in Appendix IIB of the textbook, which is -46.19 kJ/mol.

Similarly, in Part C, we see that the formation of CO2(g) from its elements, carbon and oxygen, results in the reaction C(s) + O2(g) --> CO2(g). In Part D, we can use the standard enthalpy of formation value for CO2(g) found in Appendix IIB of the textbook, which is -393.51 kJ/mol.

For more questions like Standard enthalpy  click the link below:

https://brainly.com/question/29556033

#SPJ4

It is not possible to answer this question without additional information. The amount of chlorine gas in the container depends on the size of the container, the pressure of the air inside it, and the temperature of the gas.

Chlorine gas is a toxic, yellowish-green gas that has a strong, pungent odor. It is extremely reactive and is used in a wide range of industrial applications, from water purification to bleaching and disinfecting. Chlorine gas is a hazardous material and can cause serious health effects if inhaled or ingested. At low levels, it can cause irritation of the eyes, nose and throat. At higher levels, it can cause lung damage, difficulty breathing and even death. Chlorine gas can be produced by burning organic materials such as wood or coal, as well as by chemical reactions such as the reaction of hydrochloric acid with calcium hypochlorite. It is also produced naturally through the breakdown of saltwater in the ocean.

To learn more about chlorine gas
https://brainly.com/question/4607123
#SPJ4

A basketball is left outside in winter when the temperature is -2.00°C, has a volume of 6.88L and the pressure inside the basketball is 0.795atm. 182 moles of gas are in the basketball The partial pressure of oxygen in the basketball is 0.998 atm.

The term partial pressure is defined as the pressure exerted by an individual gas in a mixture.

By an ideal gas equation,

PV = nRT

Where,

P = pressure

V = volume

R = gas constant its value is 8.314

T = temperature

n = number of moles

By putting this value in given equation, we get

0.795 × 6.88 = n × 8.314 × 271.15

n = 5.46 / 0.03

= 182

Thus,182 moles of gas are in the basketball The partial pressure of oxygen in the basketball is 0.998 atm.

To learn more about the partial pressure, follow the link;

https://brainly.com/question/15075781

#SPJ1

The process of "hot filtration" involves heating both the mixture and all of the glassware used in the filtering. When you are separating a slightly soluble solid from an insoluble solid.

A type of filtration called hot filtration involves heating both the sample and the filter apparatus while it is being used. When there are contaminants in the solution, hot filtering is required for recrystallization. Recrystallization requires a hot solution because crystals must form upon cooling in a supersaturated solution. Because most solids are more soluble at higher temperatures, hot solutions can hold more solute in suspension than cold ones. This indicates that a saturated solution created at a higher temperature than at a cold temperature will have more dissolved solute. The heated solution will be supersaturated when it cools because it will hold more dissolved solute than its cold counterpart would.

To know more about hot filtration click here

https://brainly.com/question/26391720

#SPJ4

The molecular formula of the compound which contains 18.7% lithium, 16.3% carbon, and 65.0% oxygen by mass is calculated to be as  Li₂CO₃.

We have the given details in the question as:

Percentage of oxygen given as= 65.0%

Percentage of lithium given as= 18.7%

Percentage of carbon given as= 16.3%

The gram atoms for the above can be calculated as :

Given Number of gram atoms of C = 16.3/12 = 1.4

Given Number of gram atoms of Li = 18.7/6.94 = 2.7

Given Number of gram atoms of O = 65.0/ 16 = 4.1

The atomic ratio can be formulated as:

Li              :            C          :    O

2.7/1.4      :       1.4/1.4         :   4.1/1.4

    2          :            1           :     3  

Li : C : O = 2 : 1 : 3

The molecular formula can be calculated as Li₂CO₃.

Learn more about molecular formula:

brainly.com/question/14425592

#SPJ4

Answer: it is b i got it right on the test

Explanation:

The balanced equation for the reaction (e) MnO4-1aq2 + Br -1aq2 ¡ MnO21s2 + BrO3-1aq2 is: MnO4- (aq) + 5Br- (aq) + 6H+ (aq) -> MnO2 (s) + 8H2O (l) + 5BrO3- (aq)

The oxidizing agent in this reaction is MnO4- (aq) and the reducing agent is Br- (aq). An oxidizing agent is a substance that causes another substance to lose electrons and become more oxidized. In this case, the MnO4- (aq) oxidizes Br- (aq) to BrO3- (aq) by accepting electrons from Br-.A reducing agent is a substance that causes another substance to gain electrons and become more reduced. In this case, the Br- (aq) reduces MnO4- (aq) to MnO2 (s) by donating electrons to MnO4-. It's worth noting that the equation is balanced in an acidic solution, but in a basic solution the equation is different, and the oxidizing agent would be the same but the reducing agent would be H2O instead of Br-.

Learn more about oxidizing agent here:

https://brainly.com/question/10547418

#SPJ4

The eyes, nose, and throat may get irritated after being exposed to sulfur dioxide. Nasal mucus, coughing, reflex bronchi constriction, choking, and when liquid: frostbite Workers who are exposed to sulfur dioxide may suffer injury.

What is food-borne sulfur dioxide?

Various foods and beverages, such as dried fruits, pickled vegetables, sausages, fruit and vegetable juices, cider, vinegar, wine, etc., frequently employ sulphur dioxide as a preservative. Sulfur residues in food are regarded as having a minimal hazardous potential.

Is dried fruit's sulfur dioxide harmful?

If you're sensitive to it, even a small amount of sulfite might cause serious health problems. Eating dried fruits could seriously harm your health if you have asthma, sulfite sensitivity, or a sulfite allergy. These issues could include breathing difficulties and potentially fatal allergy-like symptoms.

To know more about sulfur dioxide visit:

brainly.com/question/21406084

#SPJ4

Sorry this question is incomplete.

Given hard water is equivalent to mg of CaCO3 in 1L (1000ml).Water's overall hardness is 1000 V2/V1 mg/l, or 1000 V2/V1 ppm.

30% of the CaCO3 remained unreacted in equilibrium when 20g of CaCO3 were added to a 10-liter flask and heated to 800.

Because calcium carbonate has a molecular weight of 100 g/mol and is easier to compute when the value is expressed in terms of 100, the water's hardness is typically reported in parts per million (ppm) and evaluated in terms or calcium carbonate.

To know more about carbonate visit:

https://brainly.com/question/22530423

#SPJ4

The gas thermal energy changed by the value of plus 60 joules at constant 400 kpa pressure a gas is compressed from 600 cm3 to 200 cm3.

Calculate the work done as follows: W =-PAV

=-(400×10³ Pa)(200×10m³ - 600×10m³)

= +160 J

Here, positive sign indicates work is done on the gas.

Calculate the thermal energy as follows:

AU=Q+W

=-100+160 J

= +60 J

Here, the sign of Q is negative because heat is removed from the gas.

The system and environment can exchange energy with each other. One of the ways to exchange energy is doing work that can be understood in mechanical terms.

According to the Newton’s third law, the work done on the system by the environment and the work done by the system on the environment differ by the sign. In the general formulation of thermodynamics, we consider the former.

To know more about thermal energy here

https://brainly.com/question/19666326

#SPJ4

The pkb of the conjugate base of x⁻281 is 9.69.

Conjugate base is termed as the base member x⁻ of a pair of compounds which transform into each other by gaining or losing a proton. The conjugate base is able to gain or absorb a proton in the chemical reaction. It is formed when a proton is removed from an acid. It depends upon which substance is involved.  conjugate base is the solvated electron whose conjugate acid is the atomic hydrogen.

Its calculation is based on the relation between pKa and pKb with pKw

pKa + pKb = pKw = pKa + pKb = 14.00

pKb = 14.00 - pKa = 14.00 - 4.31 = 9.69

To know more about conjugate base here

https://brainly.com/question/30225100

#SPJ4

To predict whether creatine kinase will operate in the direction of ATP synthesis or phosphocreatine synthesis, we need to consider the equilibrium constant for the reaction and the concentrations of the reactants and products.

The reaction catalyzed by creatine kinase is:

ATP + creatine <-> ADP + phosphocreatine

The equilibrium constant for this reaction is defined as:

Kc = [ADP][phosphocreatine] / [ATP][creatine]

We are given the concentrations of the reactants and products at 25°C:

[ATP] = 4 mM

[ADP] = 0.15 mM

[phosphocreatine] = 2.5 mM

[creatine] = 1 mM

We can use these concentrations to calculate the value of the equilibrium constant:

Kc = [ADP][phosphocreatine] / [ATP][creatine] = (0.15 mM)(2.5 mM) / (4 mM)(1 mM)

Kc = 0.09375

If the value of the equilibrium constant is less than 1, the reaction will favour the reactants, meaning it will operate in the direction of ATP synthesis. If the value of the equilibrium constant is greater than 1, the reaction will favour the products, meaning it will operate in the direction of phosphocreatine synthesis.

Since the value of the equilibrium constant is less than 1, the reaction will favour the reactants, meaning that creatine kinase will operate in the direction of ATP synthesis.

In summary, the reaction catalyzed by creatine kinase at 25°C when, [ATP] = 4 mM, [ADP] = 0.15 mM, [phosphocreatine] = 2.5 mM and [creatine] = 1 mM will operate in the direction of ATP synthesis.

Learn more about ATP Synthesis here: https://brainly.com/question/30051393

#SPJ4

The distance in meters that would be covered by lining up 57.01 grams of hydrogen atoms side by side will be 4.1197 x [tex]10^{17[/tex] m.

According to Avogadro, 1 mole of a substance will contain 6.022 x [tex]10^{23[/tex] atoms. Thus, the first step would be to find the total number of hydrogen atoms that is present in the 57.01 grams sample.

Mole = mass/molar mass

Mole of 57.01 grams of hydrogen = 57.01/1

                                                        = 57.01 moles

1 mole = 6.022 x [tex]10^{23[/tex] atoms

57.01 moles = 6.022 x [tex]10^{23[/tex] x 57.01

                   = 3.4331 x [tex]10^{25[/tex] atoms

Now, each atom of hydrogen has a diameter of 1.2 x [tex]10^{-10[/tex] m.

The total distance that would be covered, in meters, when 3.4331 x [tex]10^{25[/tex] atoms of hydrogen are lined side by side would be:

1.2 x [tex]10^{-10[/tex] x 3.4331 x [tex]10^{25[/tex] = 4.1197 x [tex]10^{17[/tex] m

In other words, the distance in meters that would be covered by lining up 57.01 grams of hydrogen atoms side by side will be 4.1197 x [tex]10^{17[/tex] m.

More on Avogadro atoms can be found here: https://brainly.com/question/28834341

#SPJ1

They move at various speeds and bounce off one another. Being slower than air, though. Although they stop moving, the water molecules remain in motion. Slowing down, the Air. Water molecules—both those in the liquid and the vapor state—are travelling quickly.

a substance's tiniest particle possesses all of its physical and chemical characteristics. A single atom or more make up a molecule.

The tiniest particle in such a chemical compound or element that possesses the chemical characteristics of that compound or an element is known as a molecule. Atoms are the building blocks of molecules, and chemical bonds are what hold them together. Two different types of molecules exist: An element's molecules An element is composed up of molecules.

To know more about molecules visit:

https://brainly.com/question/19556990

#SPJ4

The redox reaction is not balanced. The balanced equation for the first reaction is: Ni(s) + Cd2+(aq) → Ni2+(aq) + Cd(s)

What is redox reaction?

A redox reaction, also known as an oxidation-reduction reaction, is a type of chemical reaction in which the oxidation states of atoms are changed. Oxidation is the process of losing electrons, and reduction is the process of gaining electrons. Transfer of electrons through one reactant to some other occurs during redox reactions. These reactions can involve substances in all three states of matter: gases, liquids, and solids. Examples of redox reactions include combustion, rusting of iron, photosynthesis, respiration, and electrolysis. Redox reactions are essential for life, as they are involved in many energy-producing processes, such as cellular respiration.

The balanced equation for the second reaction is: Mg(s) + Cr3+(aq) → Mg2+(aq) + Cr2+(aq)
The balanced equation for the third reaction is: Cl-(aq) + 2NO3-(aq) → NO(g) + Cl2(g)

To learn more about redox reaction
https://brainly.com/question/21851295
#SPJ4

That solubility of NaCl will decline as the temperature rises; this is also true of the solubility of CH4 and NaCl(s) in water.

The biggest concentration of a solvent that may disintegrate in a liquid at a specific temperature is known as solubility. The water is deemed saturated when the solute concentration reaches its maximum. Mol/L or g/L quantities of immersion can be given.

The maximum quantity of an ingredient that should dissolve in a solvent at a particular temperature is known as its solubility. Temperature and pressure are the two direct variables that impact solubility. Pressure solely influences the concentration of dissolved oxygen, but temperatures affects the dissolution both of solids and gases.

To know more about solubility visit:

https://brainly.com/question/28170449

#SPJ4

The Haber process is an industrial process that converts nitrogen gas (N2) and hydrogen gas (H2) into ammonia (NH3) under high temperature and pressure conditions. The process is named after its inventor, Fritz Haber.

An increase in temperature in the Haber process will generally increase the rate of the reaction, as the kinetic energy of the reactant molecules increases, allowing them to collide more frequently and with more energy, increasing the chances of successful collisions and formation of products.

However, as the temperature increases, the equilibrium position of the reaction will shift towards the reactants side. This will decrease the yield of the desired product, ammonia.

Additionally, the high temperatures used in the Haber process can cause thermal decomposition of the ammonia, further reducing the yield of the desired product.

It's worth noting that, the Haber process is usually run at about 400-450°C and 200-250 atmospheres pressure, to reach an optimal yield and efficiency. Operating the process at a higher temperature than this range would decrease the efficiency and yield of the process.

First ordering in O2 and second tier in NO are involved in the process 2NO(g) + O2(g) 2NO2(g). The observed speed of the reaction at [NO] = 0.8 M & [O2] = 3.7 M is 0.00022022 M/s.

As a result, if we were to create one molecule of gaseous oxygen, we would do so using elemental oxygen, which is also a gas. Therefore, since there won't be any change when one mole of gaseous oxygen is formed through one gram of oxygen gas, the sample in the formation's free energy is identical to zero.

Because it is readily accessible at all times, Gibb's unlimited energy is known as free energy. The reaction can obtain this if necessary.energy that is available without effort. Enthalpy and the system's sum of heat and entropy are added to determine the change of Gibb's free energy.

To know more about molecule visit

https://brainly.com/question/19556990

#SPJ4

The repeated experiment using 2 mole of HCl results in a heat release of 57.1 kJ.

A scientific experiment is any technique where data is collected and tests are conducted to confirm or refute a hypothesis. The hypothesis is indeed a claim that appears to be accurate but hasn't been independently proven. It can be the starting point for additional study. Variables are manipulated in the experimental technique to establish relationships between cause and effect. The primary criteria include the use of controlled procedures and the random assignment of individuals to control or experimental groups. A research where a theory is objectively tested by an experiment.

We can make better decisions about our ideas and projects by experimenting. People frequently make the error of taking an idea and running with it without first evaluating the underlying premises. Although we frequently don't know, we only presume when we think we do.

The given reaction,

HCL(aq)+NaOH(aq)→NaCl(aq)+H_2 O(I)

∆H=-57.1kJ/mol

Two moles of HCl are present.

As a result, 2 moles of HCl and 2 moles of NaOH react, yet there is only 1 mole of NaOH available.

As a result, HCl is an excessive factor while NaOH is a limiting element in the process.

Only 1 mole of HCl will react with the 1 mole of NaOH that is available, hence 57.1 kJ of heat are released during the second experiment with 2 moles of HCl.

To know more about Experiment visit:

https://brainly.com/question/30055326

#SPJ4

The conformation with the axial methyl and chlorine substituents is more stable.

Chlorine substituents are chemical groups or molecules that are attached to other molecules or substances, typically through a covalent bond.

Since the axial methyl and chlorine substituents are more stable, the compound would spend more than 95% of its time in this conformation. To calculate this, we can use the Boltzmann equation.
ΔG = -RTlnK
Where K is the equilibrium constant.
K = e-ΔG/RT
For a temperature of 25°C, R=8.314 J/K⋅mol.
ΔG = -8.314⋅25⋅lnK
If we assume that K is greater than 95%, then lnK must be a positive number.
lnK = ΔG/8.314⋅25
ΔG = 8.314⋅25⋅ln95
ΔG = 44.2 kJ/mol
Therefore, the compound will spend more than 95% of its time in the more stable conformation if the energy difference between the two conformations is greater than 44.2 kJ/mol.

To learn more about chlorine substituents
https://brainly.com/question/13016475
#SPJ4

Steroids are the structures made up of four fused carbon atom rings with one or more polar hydroxyl groups affixed to the ring structure. The two main biological roles of steroids are as signaling molecules and as critical elements of cell membranes that affect membrane fluidity.

What do you mean by hydroxyl groups?

A functional group is one that contains the hydroxyl group (-OH). Alcohols are the compounds that are created when hydroxyl groups are the main functional group attached to carbon backbones. This group is located on the far right in the structural formula of the chemical molecule ethanol, which is a kind of alcohol.

Additional examples include propanol, methanol, and isopropyl alcohol.

To learn more about functional groups, click here: -

https://brainly.com/question/29263610

#SPJ4