A proton moves across the Earth's equator in a northeasterly direction. At this point the earth's magnetic field has a direction due north and is parallel to the surface. What is the direction of the force acting on the proton at this instant?

Electricity is supplied to a school along a cable of total resistance 0.5 ohms with the maximum current drawn from the mains as 100A. the maximum energy dissipated as heat for 1hr is 18,000,000 Joules (J).

The following formula may be used to determine the maximum energy that was lost as heat during one hour:

Power x Time equals Energy

where authority is granted by

I2R = Power

where R denotes the overall resistance of the wire and I denotes the current flowing through it.

Given that the maximum current drawn from the mains is 100A and that the total resistance of the cable is 0.5 ohms, we may determine the power wasted as follows:

5000W is equal to (100A)2 times 0.5.

We must convert one hour to seconds in order to determine the amount of energy lost throughout that time. Since 3600 seconds make up 1 hour, we have:

Time = 3600s

Therefore, the amount of energy that was lost as heat in an hour is:

So the maximum energy dissipated as heat for 1 hour is 18,000,000 Joules (J).

To know more about Energy :

https://brainly.com/question/1932868

#SPJ1.

On two planets with the same size, mass, and direction of travel, your weight will be the same on both planets. Option A.

The weight of an object depends on its mass and the strength of the gravitational force acting on it.

Since planets A and B have the same size and mass, their gravitational forces will be the same. Therefore, an object placed on either planet will experience the same gravitational force and hence the same weight.

The speed of the planets has no effect on the weight of an object on them. Therefore, options (B), (C), and (D) are incorrect.

In other words, you would weigh the same on both planets because their masses and the distance to their centers of gravity are the same.

More on gravity can be found here: https://brainly.com/question/31321801

#SPJ1

The displacement is defined as the shortest distance between the starting and ending point along with the direction. Thus, option D is correct.

The displacement is defined as the shortest distance between the starting and ending point. The displacement is the vector quantity. It is also defined as the distance traveled by the object along with a particular direction. The distance is the scalar quantity and the displacement is the vector quantity. The SI unit of distance is a meter. The rate of change of displacement gives rise to velocity and the rate of distance gives rise to distance.

From, the given displacement is defined as the shortest length and direction from a starting and ending point. Thus, the correct option is D.

To learn more about Displacement:

https://brainly.com/question/11934397

#SPJ1

The example provided is most closely related to option C: Performance accomplishments.

Setting a mileage goal each week and becoming more confident about finishing the race indicates that Tina is actively working towards her goal of running a 5k race. By gradually increasing her mileage and gaining confidence, she is achieving performance accomplishments, which involve personal achievements and successful experiences.

Physiological states refer to the influence of one's physical and emotional condition on their confidence and motivation. Verbal persuasion involves receiving encouragement or positive feedback from others. Vicarious experience entails gaining confidence by observing and learning from others' successes.

Learn more about Performance accomplishments, here;

https://brainly.com/question/2065380

#SPJ1

Answer:

Explanation:

The following statements are true regarding the area of circles and sectors:

The area of a circle depends on the length of the radius.

The area of a sector depends on the ratio of the central angle to the entire circle.

The area of a sector can be used to find the area of a circle.

The amplitude of the oscillation is +0.10 m, as shown in snapshots A and E.

Oscillation refers to a repetitive back-and-forth or up-and-down motion of an object or system about an equilibrium position. This motion can be periodic or non-periodic.

The amplitude of an oscillation is the maximum displacement of the object or system from its equilibrium position during one cycle of motion. It is the distance between the equilibrium position and either the crest or trough of the wave. The amplitude determines the energy of the oscillation, with larger amplitudes corresponding to greater energy. In the context of waves, amplitude can also refer to the maximum displacement of the medium from its rest position.

Therefore, The amplitude of the oscillation is +0.10 m, as shown in snapshots A and E.

To learn more about Simple Harmonic Motion click:

https://brainly.com/question/30404816

#SPJ1

The 'feeling' function in one's personality can be effectively developed through empathy, primarily by imagining how others might feel in various situations. This enhances one's ability to connect with others emotionally.

One effective way to develop the 'feeling' function in your personality can be achieved through increased levels of empathy. The best choice among the provided options would be 'C. Imagine how other people might feel in a situation'. This behavior enables you to consider and understand circumstances from the perspectives of other people, thereby enhancing your capabilities to connect with them on an emotional level. It's important to note that this doesn't involve ignoring the consequences of your actions or spending more time alone. In contrast, it's about actively engaging in understanding and empathizing with others and their experiences.

https://brainly.com/question/34791309

#SPJ2

A) The height of the cliff is approximately 18.93 meters if it takes 2.37 s for a rock to hit the ground when it is thrown straight up from the cliff with an initial velocity of 8.03 m/s.

B) It would take approximately 1.63 seconds for the rock to hit the ground if it is thrown straight down with the same speed.

A) To calculate the height of the cliff, we can use the kinematic equation:

h = vi*t + (1/2)at^2

where h is the height of the cliff, vi is the initial velocity, t is the time taken, and a is the acceleration due to gravity (-9.8 m/s^2).

Substituting the given values, we get:

h = 8.032.37 + (1/2)(-9.8)*(2.37)^2

h = 18.93 meters

Therefore, the height of the cliff is approximately 18.93 meters.

B) To determine how long it would take for the rock to reach the ground if it is thrown straight down with the same speed, we can use the same kinematic equation, but with a negative initial velocity:

h = vi*t + (1/2)at^2

where vi is now -8.03 m/s.

Substituting the values, we get:

0 = -8.03t + (1/2)(-9.8)*t^2

Solving for t, we get:

t = 1.63 seconds

Therefore, it would take approximately 1.63 seconds for the rock to hit the ground if it is thrown straight down with the same speed.

for more such question on initial velocity

https://brainly.com/question/24493758

#SPJ11

Answer:

same power source

can have more than 1 light bulb in a circuit

requires a source of energy

Explanation:

The specific satirical element used by a writer would depend on the context and purpose of their writing.

As an AI language model, I do not have access to a specific excerpt. However, satire is a literary technique used to expose and criticize human vices, foolishness, or shortcomings through humor, irony, or exaggeration. It often employs irony, sarcasm, or ridicule to expose and critique societal issues or individual behavior. The most common satirical elements include hyperbole, parody, irony, and sarcasm.

For example, hyperbole is an exaggeration used to make a point, such as when a satirist might exaggerate the absurdity of a situation or person. Parody is the use of imitation to ridicule or criticize a particular style or individual. Irony is the use of language to convey a meaning opposite to its literal sense. Sarcasm is the use of words to convey contempt or ridicule, often by saying the opposite of what is meant.

For more such questions on satirical

https://brainly.com/question/30097283

#SPJ11

Answer:

a

Explanation:

I fact checked

The effective capacitance of the following combination with capacitors C₁, C₂, C₃, C₄, C₅ = 100μF is 350 μF.

Capacitors are the energy storage device in the form of electrical energy. The amount of charge (Q) stored in the capacitors is linearly proportional to the applied Voltage (V). Capacitance equals the ratio of charge and voltage. The unit of capacitance is Farad (F). Capacitors are connected in series and parallel connections. In series connections, the capacitance is 1/C(eff) = 1/C₁ + 1/C₂. In parallel connections, the effective capacitance C(eff) = C₁ + C₂.

From the figure,

The capacitances, C₁, C₄, C₂ are parallelly connected whereas C₃ and C₅ are in series connections.

C(eff) = C₁ + C₂ + C₄ = 100 + 100 + 100 = 300 μF

The capacitance C₅ and C₃ are in series connections, then

1/C(eff) = 1/C₅ + 1/C₃ = 1/100 + 1/100 = 2/100 = 1/50

C(eff) = 50  μF

The effective capacitance = 300 + 50 = 350  μF.

To learn more about capacitance:

https://brainly.com/question/31871398

#SPJ1

After considering all the given data we conclude that the the amount of energy needed to vaporize the water completely is 722.24 kJ.

The energy needed to vaporize water is reffered to as the heat of vaporization. The heat of vaporization of water is 2257 kJ/kg³.

Here we have to apply the principles of vaporization to derive a formula to evaluate the energy needed to vaporize 0.32 kg of water,

Then

Energy = Heat of vaporization x Mass of water

Energy = 2257 kJ/kg x 0.32 kg

Energy = 722.24 kJ

Then, the energy needed to totally vaporize the water being heated is 722.24 kJ.

To learn more about vaporization

https://brainly.com/question/26306578

#SPJ1

Refer to the attached images.

The force between two charged particles can be calculated using Coulomb's Law:

[tex]F = (k * |q1 * q2|) / r^2[/tex]

F is the force, k is Coulomb's constant (8.99 x 10^9 N m^2/C^2), q1 and q2 are the charges of the particles, and r is the separation distance between them.

For q1 and q2:

[tex]F1 = (k * |q1 * q2|) / r1^2\\= (8.99 x 10^9 N m^2/C^2) * (66.3 x 10^-{6} C) * (108 x 10^{-6 }C) / (0.550 m)^2[/tex]

For q2 and q3:

[tex]F2 = (k * |q2 * q3|) / r2^2\\= (8.99 x 10^9 N m^2/C^2) * (108 x 10^{-6} C) * (43.2 x 10^{-6} C) / (0.550 m)^2[/tex]

The net force on q2 is the vector sum of F1 and F2:

Net Force = F2 - F1

By calculating these values, we can determine the net force on particle q2.

Learn more about net force, here:

https://brainly.com/question/31822689

#SPJ1

1) Since each bulb has a resistance of 3.00 Ω, we can calculate the number of bulbs: n = R/R_bulb = 96 Ω/3.00 Ω = 32 bulbs. There are 32 light bulbs in the circuit.

2) The total resistance is equal to the sum of individual resistances: R_C = 120 Ω - 6 Ω - 18 Ω = 96 Ω. The resistance of bulb C is 96 Ω.

In a series circuit, the total resistance is equal to the sum of individual resistances. Using Ohm's Law, we can find the total resistance:

R = V/I = 120.0 V/1.25 A = 96 Ω

Since each bulb has a resistance of 3.00 Ω, we can calculate the number of bulbs:

n = R/R_bulb = 96 Ω/3.00 Ω = 32 bulbs

Therefore, there are 32 light bulbs in the circuit.

In a series circuit, the total resistance is equal to the sum of individual resistances:

R_eq = R_A + R_B + R_C

Substituting the given values:

120 Ω = 6 Ω + 18 Ω + R_C

Solving for R_C:

R_C = 120 Ω - 6 Ω - 18 Ω = 96 Ω

Therefore, the resistance of bulb C is 96 Ω.

For more question on resistances

https://brainly.com/question/17563681

#SPJ11

The force on each side of the loop is 5.1 × 10^-5 N in the direction perpendicular to the wire and the magnetic field, and the direction of the force is determined by the right-hand rule.

The force on each side of the loop can be calculated using the formula F = BIL, where F is the force, B is the magnetic field, I is the current, and L is the length of the wire.

First, we need to find the magnetic field inside the solenoid. The magnetic field inside a solenoid is given by B = μ₀nI, where μ₀ is the permeability of free space, n is the number of turns per unit length, and I is the current.

In this case, the magnetic field inside the solenoid is B = μ₀nI = (4π × 10^-7 T·m/A)(25 turns/cm)(17.0 A) = 0.017 T.

Since the loop is perpendicular to the magnetic field, the angle between the current and the magnetic field is 90 degrees, and the force on each side of the loop is given by F = BIL. The length of each side of the square loop is L = 8.0 cm/4 = 2.0 cm.

Therefore, the force on each side of the loop is F = (0.017 T)(0.15 A)(2.0 cm) = 5.1 × 10^-5 N.

For more such questions on magnetic

https://brainly.com/question/14411049

#SPJ11

The enthalpy change of the formation for solid iodine trichloride is -74 kJ/mol. This indicates that the formation of solid iodine trichloride is exothermic

The enthalpy change of the formation for solid iodine trichloride (ICl3) can be calculated using Hess's law, which states that the total enthalpy change of a chemical reaction is independent of the route by which the reaction occurs.

First, we need to write the balanced chemical equation for the formation of solid ICl3 from its elements:

I2(s) + 3Cl2(g) → 2ICl3(s)

According to Hess's law, the enthalpy change of this reaction is equal to the sum of the enthalpy changes of the following two reactions:

I2(s) + Cl2(g) → 2ICl(g) ΔH1

ICl(g) + Cl2(g) → ICl3(s) ΔH2

where ΔH1 is the enthalpy change for the reaction between iodine and chlorine to form gaseous iodine trichloride, and ΔH2 is the enthalpy change for the condensation of gaseous iodine trichloride to form solid iodine trichloride.

The enthalpy change for the first reaction is given as ΔH1 = +14 kJ/mol, and the enthalpy change for the second reaction is given as ΔH2 = -88 kJ/mol. Therefore, the enthalpy change of the formation for solid iodine trichloride can be calculated as:

ΔHf°(ICl3,s) = ΔH1 + ΔH2

= (+14 kJ/mol) + (-88 kJ/mol)

= -74 kJ/mol

For more question on enthalpy visit:

https://brainly.com/question/30654988

#SPJ11

The difference between the distance travelled by the t-shirt and the person's position is 3.07 m.

The time of motion of the t-shirt is calculated as follows;

t = √ ( 2h / g )

where;

t = √ ( 2 x 27.7 / 9.8 )

t = 2.4 s

The maximum horizontal distance travelled by the t-shirt is calculated as follows;

d = Vₓt

where;

d = (25.8 m/s x cos(63.6) ) x 2.4 s

d = 27.53 m

The difference between the distance travelled by the t-shirt and the person's position is calculated as;

= 27.53 m - 30.6 m

= -3.07 m

Learn more about horizontal distance here: https://brainly.com/question/16411732

#SPJ1

To draw a schematic diagram effectively, there are several key points to consider. First, it is important to understand the system or circuit you are trying to represent. Second, organize the diagram in a logical and readable manner. Third, maintain clarity and simplicity in the diagram. Lastly, follow standard practices and guidelines for drawing schematic diagrams. We should be aware of while drawing them because for understanding the system.

A schematic diagram is a graphical representation that depicts the electrical connections and components of a system. It is commonly used in various fields such as electronics, electrical engineering, and industrial automation. To draw a schematic diagram effectively, there are several key points to consider.

Firstly, it is important to understand the system or circuit you are trying to represent. Analyze the components and their relationships, and determine the appropriate symbols to represent each component accurately. Use standard symbols and conventions to ensure consistency and easy interpretation by others.

Secondly, organize the diagram in a logical and readable manner. Arrange components and connections in a way that reflects their physical arrangement or the flow of signals. Use clear and concise labeling to identify each component and connection point.

Thirdly, maintain clarity and simplicity in the diagram. Avoid cluttering the diagram with unnecessary details. Focus on the key elements and connections that are essential for understanding the system.

Lastly, follow standard practices and guidelines for drawing schematic diagrams. This includes using consistent wire and connection symbols, labeling voltage and current values, and providing necessary annotations or notes for clarification.

Drawing a schematic diagram requires a good understanding of the system, adherence to standard symbols and conventions, logical organization, and clarity. By following these guidelines, you can create schematic diagrams that effectively convey the desired information. Remember, practice and attention to detail are essential for improving your schematic diagram drawing skills.

For more such information on:  schematic diagram

https://brainly.com/question/27578538

#SPJ11

The work done is the amount of energy transferred by the force to move an object. Work done equals the product of force and displacement. It is the scalar quantity.

Work done, W = F.d, where F is the force and d is the displacement of the object. The unit of work done is N/m or joule. Hence, the unit of work done is the joule. Thus, the correct option is option D.

Energy is defined as the ability to do work. Energy is of two types and they are potential and kinetic energy. Potential energy is the energy possessed by the object when the object is at rest and the kinetic energy is the energy possessed by the object when it is in motion.

Thus, the kinetic energy is maximum at X and Z. Thus, the ideal solutions are options B and D. The potential energy is maximum at W. Hence, the correct option is A.

To learn more about potential and kinetic energy:

https://brainly.com/question/1413008

#SPJ1

Answer:

The speed of a wave is equal to the wavelength divided by the period. The wavelength is the distance between two consecutive nodes, and the period is the time it takes for one complete cycle of the wave.

In this case, the wavelength is 6 m and the period is 0.2 s. Therefore, the speed of the wave is 30 m/s.

The answer is 30 m/s.

Explanation:

India's employment situation can be improved by recasting the present educational system towards the implementation of scientific discoveries in daily life.

India's employment situation has been a concern for a long time now, and it is true that structural factors are responsible for the high unemployment rate.

However, the current slowdown has made things worse, and there is a need for urgent action to address the situation. One way to improve the employment situation in India is to recast the present educational system towards the implementation of scientific discoveries in daily life.

The implementation of scientific discoveries in daily life can help in the development of new industries and the growth of existing ones. This can create new jobs and lead to economic growth.

For example, the implementation of renewable energy technologies can create jobs in the manufacturing, installation, and maintenance of solar panels and wind turbines. Similarly, the implementation of biotechnology in agriculture can lead to the development of new crop varieties and the creation of jobs in the agricultural sector.

Furthermore, the implementation of scientific discoveries can also lead to the development of new products and services that can be exported. This can help in the growth of the economy and create new jobs in the process. For example, the development of new software products and services can create jobs in the IT sector.

In order to achieve this, there is a need to recast the present educational system in India. This can be done by emphasizing the teaching of science, technology, engineering, and mathematics (STEM) subjects.

Furthermore, there is a need to improve the quality of education in India by investing in research and development, and by promoting entrepreneurship and innovation. This can help in the creation of a knowledge-based economy that can create new jobs and lead to economic growth.

For more such questions on employment visit:

https://brainly.com/question/30872085

#SPJ11

In a case whereby Gia is creating an ad for her new workout studio. She wants to appeal to people in the area to give her studio a try an example of an emotional appeal is D.You deserve to feel good about yourself! Working out at my studio can do that for you!

An debate  an be won through thepeocess of emotional appeal,  beaue it is an emotional manipulation, as opposed to utilizing reason and logic.

An informal fallacyan be described a the argumentum ad passiones tht encopass the process of appealing to the recipient's emotions in attempt to win an argument, particularly in the absence of factual evidence.

Learn more about emotional appeal at:

https://brainly.com/question/1837090

#SPJ1

i) The slope of the line (m) would be ln(a), and the intercept (c) would be 0.

ii)  The slope and intercept obtained from the linearized equations provide valuable information about the relationship between the variables involved.

To linearize the given equations, we need to rewrite them in a linear form. Let's work through each equation:

(i) Y = aX¹

To linearize this equation, we can take the natural logarithm (ln) of both sides:

ln(Y) = ln(aX¹)

Using the logarithmic property, we can simplify it as:

ln(Y) = ln(a) + ln(X¹)

Now, we can introduce a new variable, let's say ln(Y), and rewrite the equation as:

ln(Y) = ln(a) + X¹ln(X)

Now, we have a linear equation in the form Y' = mX' + c, where Y' = ln(Y), X' = ln(X), m = ln(a), and c = 0. In this linearized form, Y' would be plotted on the y-axis, and X' would be plotted on the x-axis. The slope of the line (m) would be ln(a), and the intercept (c) would be 0.

(ii) C = aT + BT²

To linearize this equation, we can introduce a new variable, let's say Z, defined as Z = C/T. Now, we can rewrite the equation as:

Z = a + BT

Now, we have a linear equation in the form Z = mT + c, where Z = C/T, m = B, and c = a. In this linearized form, Z would be plotted on the y-axis, and T would be plotted on the x-axis. The slope of the line (m) would be B, and the intercept (c) would be a.

By linearizing the equations, we can transform the nonlinear relationships into linear relationships, which allows for easier analysis and interpretation of the data. The slope and intercept obtained from the linearized equations provide valuable information about the relationship between the variables involved.

For more such questions on slope

https://brainly.com/question/30481418

#SPJ11

Three facts I have learned this year in Physical Education are:

a) The importance of stretching before and after exercising.

b) The benefits of cardiovascular exercise.

c) The importance of staying hydrated during exercise.

Firstly, I have learned the importance of stretching before and after exercising. Stretching helps prevent injury and improves flexibility. I will make sure to incorporate stretching into my daily routine, whether it's through a short stretching session in the morning or by taking a few minutes to stretch before and after a workout.
Secondly, I have learned the benefits of cardiovascular exercise. Cardiovascular exercise, such as running or cycling, helps improve heart health and endurance. I will try to incorporate more cardiovascular exercise into my daily routine, such as going for a run or bike ride after work.
Lastly, I have learned the importance of staying hydrated during exercise. Dehydration can lead to fatigue and muscle cramps, so it's important to drink plenty of water before, during, and after exercise. I will make sure to carry a water bottle with me throughout the day and refill it regularly to ensure that I am staying hydrated.
In summary, by incorporating stretching, cardiovascular exercise, and staying hydrated into my daily routine, I hope to improve my overall physical health and well-being.

for more such question on Physical Education

https://brainly.com/question/31766247

#SPJ11

Answer:

unicellular

Explanation:

it's a archea so its unicellular

Quaynisha Perry's strategy was interesting: ask everyone in the room to be part of the decision-making process.

The statement has been corrected of the capitalization error.

Capitalization errors is said to take place when the writer capitalizes a word that does not require a capital letter or when the writer does not capitalize a word the requires one.

In all cases, Capitalization errors hinder the reader's experience with the writing and must  be avoided at all cost.

It is pertinent to note that you should always capitalize the first letter of the first word in a sentence, no matter what the word is.

Learn more about Capitalization errors  at:

https://brainly.com/question/25978421

#SPJ1

* **Step 1: Identify the relevant information.**

We are given the following information:

 * The initial velocity of the puck is 28.0 m/s horizontally.

 * The height of the platform above the ground is 2.00 m.

 * We can neglect air resistance.

* **Step 2: Set up the equations.**

We can use the following equations to solve for the direction of the velocity of the puck just before it hits the ground:

 * $v_y = v_0y + at$

 * $y = y_0 + v_0yt + \frac{1}{2}at^2$

Where:

 * $v_y$ is the final velocity in the vertical direction

 * $v_0y$ is the initial velocity in the vertical direction

 * $a$ is the acceleration due to gravity (9.8 m/s^2)

 * $t$ is the time

 * $y$ is the vertical position

 * $y_0$ is the initial vertical position

* **Step 3: Solve for the unknowns.**

We can solve for the final velocity in the vertical direction using the following equation:

```

v_y = v_0y + at

```

Plugging in the known values, we get:

```

v_y = 0 + (-9.8) t

```

```

v_y = -9.8t

```

We can solve for the time using the following equation:

```

y = y_0 + v_0yt + \frac{1}{2}at^2

```

Plugging in the known values, we get:

```

2 = 0 + (0) t + \frac{1}{2}(-9.8)t^2

```

```

4 = -4.9t^2

```

```

t^2 = -0.816

```

```

t = -0.90

```

We can now solve for the final velocity of the puck using the following equation:

```

v_y = -9.8t

```

Plugging in the known value for $t$, we get:

```

v_y = -9.8(-0.90)

```

```

v_y = 8.82 m/s

```

The final velocity of the puck in the vertical direction is 8.82 m/s downward.

* **Step 4: Find the angle.**

The angle of the velocity of the puck can be found using the following equation:

```

\theta = \tan^{-1} \left ( \frac{v_y}{v_x} \right )

```

Plugging in the known values for $v_y$ and $v_x$, we get:

```

\theta = \tan^{-1} \left ( \frac{8.82}{28.0} \right )

```

```

\theta = 12.6^\circ

```

Therefore, the direction of the velocity of the puck just before it hits the ground is 12.6 degrees below the horizontal.

Answer:

Two tuning forks with frequencies of 256 Hz and 512 Hz are struck. Which of the sounds will move faster through the air? Neither, the speed of sound is constant in air.

At the given instant, the radial acceleration of the particle moving clockwise in a circle of radius 2.5 m is 21.650 m/s², its speed is 11.625 m/s, and its tangential acceleration is 12.5 m/s².

In circular motion, there are three important quantities: radial acceleration, tangential acceleration, and speed.

At the given instant, the radial acceleration (ar) can be calculated as:

ar = a cosθ

ar = 25 m/s² × cos30°

ar = 25 × 2/3

ar = 21.650 m/s²

The speed of the particle (V) can be calculated as:

V = r ×θ'

θ' = sqrt(rar/r)

θ' = sqrt(2.5×21.650/2.5)

θ' = sqrt(21.65)

θ' = 4.65 rad/s

V = r × θ'

V = 2.5 × 4.65

V = 11.625 m/s

The tangential acceleration (aθ) can be calculated as:

aθ = a sinθ

aθ = 25 m/s² ×sin30°

aθ = 25 × 1/2

aθ = 12.5 m/s²

Therefore, The particle is traveling clockwise in a circle with a radius of 2.5 m, its tangential acceleration is 12.5 m/s², its speed is 11.625 m/s, and its radial acceleration is 21.650 m/s².

I think the actual question is,

The figure shows( find at the bottom of this answer) the total acceleration and velocity of a particle moving clockwise in a circle of radius 2.5 m at a given instant of time. At this instant, find:

(a) the radial acceleration,

(b) the speed of the particle and

(c) its tangential acceleration.

To learn more about angular acceleration click:

brainly.com/question/30238727

#SPJ1

Answer: 0.02 mm

Explanation: General equation for wave has amplitude as the number that is multiplied by the trig ratio sine or cosine. The number in this case is 0.02. Since the y-value is in mm, the amplitude is 0.02 mm.