The car was at a distance of one marker when it was traveling at 70 km/h. This means it was at marker 1.
A racing car accelerates uniformly from rest, which means its initial velocity (v0) is 0 km/h. It reaches a speed of 140 km/h (v1) as it passes marker 2. We want to find the position of the car when it was traveling at 70 km/h (v2).
Since the acceleration is uniform, the ratio of the velocities will be equal to the ratio of the distances covered. Therefore, we can write:
v2 / v1 = distance to reach 70 km/h (d2) / distance to reach 140 km/h (d1)
Now, let's plug in the given velocities:
70 km/h / 140 km/h = d2 / d1
0.5 = d2 / d1
Since the markers are spaced at equal distances, let's assume the distance between each marker is x. Then, the distance to reach 140 km/h (d1) is 2x (from the start to marker 2). Now we can find d2:
0.5 = d2 / (2x)
d2 = x
So, the car was at a distance of one marker when it was traveling at 70 km/h. This means it was at marker 1.
To know more about accelerates visit:-
https://brainly.com/question/2303856
#SPJ11
why plane mirror always give a virtual image (3 reasons})
A plane mirror always forms a virtual image because of the following reasons:
1. When light rays from an object fall on a plane mirror, they get reflected from the mirror. After reflection, they never meet at any point in real but they appear to meet at some point.
2. The image formed by a plane mirror cannot be obtained on a screen.
3. Plane mirrors never focus light into a single converging point.
a sprinter runs 100.0 m in 9.87 seconds. if he travels at constant acceleration for the first 75.0 m and then at constant velocity for the final 25.0 m, what was his acceleration during the first 75.0 m?
The acceleration of the sprinter during the first 75.0 m was 1.44 m/[tex]s^2.[/tex]
We can use the kinematic equations of motion to solve this problem. Let's assume that the sprinter has an initial velocity of zero at the starting point, and a final velocity of v at the end of the 75.0 m distance. We can also assume that the time taken to cover the first 75.0 m is [tex]t_1,[/tex] and the time taken to cover the last 25.0 m is [tex]t_2[/tex].
For the first 75.0 m, we can use the following kinematic equation:
[tex]d = (1/2)at1^2[/tex]
where d is the distance covered, a is the acceleration, and t1 is the time taken to cover the distance.
For the last 25.0 m, we can use the following kinematic equation:
[tex]d = vt_2[/tex]
where d is the distance covered, v is the final velocity, and [tex]t_2[/tex] is the time taken to cover the distance.
We can also use the following kinematic equation for the entire 100.0 m distance:
[tex]d = (1/2)at^2[/tex]
where d is the distance covered, a is the acceleration, and t is the total time taken to cover the distance.
Using the given values of distance and time, we can write the following three equations:
75.0 m = [tex](1/2)at1^2[/tex] (equation 1)
25.0 m =[tex]vt_2[/tex] (equation 2)
100.0 m = [tex](1/2)at^2[/tex] (equation 3)
Since the sprinter covers the last 25.0 m at constant velocity, we know that his final velocity, v, is the same as his average velocity over the last 25.0 m. Therefore, we can write:
v = 25.0 m / t2
Substituting this expression for v into equation 3, we get:
100.0 m = [tex](1/2)at1^2[/tex] + 25.0 m / [tex]t_2[/tex]
Simplifying this equation, we get:
200.0 m = at1^2 + 50.0 m / [tex]t_2[/tex]
Now we can use equation 1 to eliminate t1:
[tex]t_1 =\sqrt(2d/a)[/tex]
Substituting this expression for t1 into equation 2, we get:
25.0 m = [tex]v(\sqrt(2d/a))[/tex]
Simplifying this equation, we get:
[tex]v^2[/tex]= 50.0ad
Substituting this expression for [tex]v^2[/tex] into the previous equation, we get:
200.0 m = (a/2)(2d/a) + (d/a) [tex]v^2[/tex]
Simplifying this equation, we get:
200.0 m = d(1/2 + 1/2)
or
d = 200.0 m
Substituting this value of d into equation 3, we get:
200.0 m = [tex](1/2)at^2[/tex]
Simplifying this equation, we get:
a =[tex](2d/t^2)[/tex]
Substituting the given values of distance and time, we get:
a = (2 x 75.0 m / (9.87 [tex]s)^2)[/tex]
a = 1.44 m[tex]/s^2[/tex]
Therefore, the acceleration of the sprinter during the first 75.0 m was 1.44 m/[tex]s^2.[/tex]
Know more about acceleration here:
https://brainly.com/question/460763
#SPJ11
the lowest three resonant frequencies that can be produced in a hollow tube are as follows:200 hz, 600 hz, 1000hzwhat kind of tube is it?
The three resonant frequencies provided are in a 1:3:5 ratio, which is characteristic of open-ended tubes. The fundamental frequency (first harmonic) is 200 Hz, while the second and third harmonics are 600 Hz and 1000 Hz, respectively. These harmonics indicate the presence of an open-ended tube.
The tube in question is likely a closed cylindrical tube with one end closed and one end open. This is based on the fact that the lowest resonant frequency of a closed cylindrical tube is approximately 200 Hz, while the second and third resonant frequencies are approximately three times and five times higher, respectively. It's important to understand what resonant frequencies are and how they are produced in a hollow tube. Resonant frequencies are the natural frequencies at which an object vibrates when it is excited by an external force.
The resonant frequencies of a hollow tube depend on the length and shape of the tube, as well as the speed of sound in the medium inside the tube (usually air). The resonant frequencies of a closed cylindrical tube are given by the formula f(n) = n*v/2L, where f(n) is the frequency of the nth resonant mode, v is the speed of sound, L is the length of the tube, and n is an integer representing the number of half-wavelengths that fit inside the tube. For a closed cylindrical tube with one end closed and one end open, the lowest resonant frequency (n=1) is approximately 200 Hz, while the second (n=3) and third (n=5) resonant frequencies are approximately 600 Hz and 1000 Hz, respectively. Based on the given resonant frequencies (200 Hz, 600 Hz, and 1000 Hz), it seems that you are dealing with an open-ended tube
To know more about frequencies visit :-
https://brainly.com/question/30783512
#SPJ11
an impactor with a maximum torino ranking would best be addressed group of answer choices striking the object with a nuclear missile in order to blow it apart. by organizing a regional evacuation to a far removed place on the globe. attempting to alter the orbital path of the potential impactor. all of the above
The objective of such an approach would be to minimize the potential impact and ensure that any damage is contained to the extent possible.would be to minimize the potential impact and ensure that any damage is contained to the extent possible.
A potential impactor with a maximum torino ranking means that there is a significant risk of it hitting the Earth and causing substantial damage. In such a scenario, it would be necessary to take swift and decisive action to prevent or mitigate the impact. While there are various options available, such as striking the object with a nuclear missile or attempting to alter its orbital path, it would be advisable to consider a comprehensive approach that involves all of the above. This means organizing a regional evacuation to a far removed place on the globe while also attempting to alter the trajectory of the potential impactor. The objective of such an approach would be to minimize the potential impact and ensure that any damage is contained to the extent possible. It is essential to recognize that the potential impact of an object with a maximum torino ranking could have far-reaching consequences for the planet, and we must take all necessary measures to prevent such an eventuality.
To know more about impactor visit :
https://brainly.com/question/29802247
#SPJ11
If arrivals occur according to the Poisson distribution every 20 minutes, then which is NOT true?
a.
λ = 20 arrivals per hour
b.
λ = 3 arrivals per hour
c.
λ = 1/20 arrivals per minute
d.
λ = 72 arrivals per day
If arrivals occur according to the Poisson distribution every 20 minutes, the statement that is NOT true is option, d: λ = 72 arrivals per day.
Given that arrivals occur according to the Poisson distribution every 20 minutes, we need to convert the rate to the appropriate time unit for each option:
a. λ = 20 arrivals per hour: This is true. The rate of 20 arrivals per hour is consistent with arrivals occurring every 20 minutes.
b. λ = 3 arrivals per hour: This is true. The rate of 3 arrivals per hour is consistent with arrivals occurring every 20 minutes.
c. λ = 1/20 arrivals per minute: This is true. The rate of 1/20 arrivals per minute is consistent with arrivals occurring every 20 minutes.
d. λ = 72 arrivals per day: This is NOT true. Since arrivals occur every 20 minutes, we need to convert the rate to arrivals per day. There are 24 hours in a day, and since arrivals occur every 20 minutes, there are 60 minutes / 20 minutes = 3 sets of 20 minutes in an hour. Therefore, there are 24 hours * 3 = 72 sets of 20 minutes in a day. The rate should be λ = 72 arrivals per day, not λ = 72 arrivals per day.
Therefore, option d is the statement that is NOT true.
Learn more about Poisson distribution from the link given below.
https://brainly.com/question/30388228
#SPJ4
a 500kg roller coaster come over the crest of a hill at 1/s if it is going 25 m/s at the bottom of the hill, how tall was the hill
The height of the hill is approximately 31.9 meters.
Conservation of EnergyThe potential energy of an object is given by the formula:
P.E. = mgh, where m is the mass of the object, g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the object.The kinetic energy of an object is given by the formula:
K.E. = (1/2)[tex]mv^2[/tex], where m is the mass of the object and v is its speed.At the top of the hill, the roller coaster has both potential and kinetic energy, so we can write:
P.E. + K.E. = mgh + (1/2)[tex]mv^2[/tex]
At the bottom of the hill, the roller coaster has only kinetic energy, so we can write:
K.E. = (1/2)[tex]mv^2[/tex]
Since the roller coaster's energy is conserved, we can equate these two expressions:
mgh + (1/2)[tex]mv^2[/tex] = (1/2)[tex]mv^2[/tex]
Simplifying and solving for h, we get:
h = ([tex]v^2[/tex])/(2g)h = (25^2)/(2x9.8) = 31.9 metersThus, the height of the hill is approximately 31.9 meters.
More on conservation of energy can be found here: https://brainly.com/question/13949051
#SPJ1
1 7. Growth and decay of the voltage in an RC series circuit The aim of this exercise is to study the response of a series RC circuit to a square wave voltage. In figure (1), a capacitor of capacitance C is connected in series with a resistor of resistance R = 10 k across an LFG adjusted to give a square wave output of period T and of maximum value E. An oscilloscope is connected to display the variations of the voltages UDM = Uc and UFM = UG across the capacitor and the generator respectively. Figure (2) is a diagram that shows the voltages over one period. a) Use figure (2) to: i. pick out the period T and the voltage E ii. identify (with justification) the four curves. b) i. Determine the differential equation that governs the variation of the voltage Uc = UDM across the terminals of the capacitor during the charging process. ii. Verify that uc = E (1 - e7) is a solution of the differential equation where t = RC. iii. Use figure (2) to determine the value of t. Deduce the value of C. u(V) 16- 14+ 12+ 10- P=E E UB64 8- 6+ 4+ 2 0 17 0 K +2 w M 4 6 duc dt 8 Ch2, 9 D LFG (2) Fig. 1 Chl R = 10 k c) i. Use the differential equation to determine the expression of the tangent to uc = f(t) at t = 0 in terms of E, T, and t. ii. Deduce that this tangent cuts the curve of equation u₁ = E at point K in figure (2). d) The capacitor starts discharging at t = 12 ms, taken as a new initial time. i. Determine the differential equation that governs the variation of uc. F Ot(ms) 10 12 14 16 18 20 22 24 Fig. 2 at t = 0. Deduce the equation of ii. The solution of the obtained differential equation is uc = Pewhere P and t' are constants. Determine the expressions of P and T'. iii. Use this expression of uc to prove that t' has a time unit.
Exercise 5-3: Series RC circuit with square-wave input Consider the series RC circuit shown in Figure 5−5 with R=10kΩ,C=0.047μF. Notice this RC circuit is quite similar to the circuit depicted in Figure 5-4 except that the positions of the resistor and the capacitor are swapped. In the present case, an oscilloscope is placed to monitor the transient responses of the capacitor and resistor when the input vs ( t ) is a squarewave voltage signal. Figure 5-5: Series RC circuit driven by square-wave voltage signal E3.1 Capture the schematic of the RC circuit in Multisim and provide a captured image of the circuit schematic in the lab report. E3.2 Set the function generator to generate a square wave with IV amplitude and 0 V DC offset at 200 Hz characterized by 50% duty circle. E3.3 Simulate the capacitor and resistor responses by turning the switch ON and OFF repeatedly. Adjust the settings on the oscilloscope such that the transient capacitor voltage v
C
(t) and resistor voltage v
R
(t) are clearly displayed. Capture the screenshot of the oscilloscope display which shows v
C
(t) and v
R
(t) clearly when the capacitor is charging as well as discharging. The captured image should be included in the lab report. E3.4 Use the cursors to determine the time Δt
R
taken for v
R
(t) to reach the steady state while the capacitor is discharging. Δt
R
= (ms) 5τ= Compare Δt
R
with the expected value of 5τ. E3.5 Explain if KVL can be verified by examining the waveforms v
R
(t) and v
C
(t) only..
select the set of quantum numbers that represents each electron in a ground‑state bebe atom.
The electron configuration of a ground-state Be atom is 1s² 2s². Each electron in the atom is described by a set of quantum numbers, including:
Principal quantum number (n): The first electron has n = 1 and the second electron has n = 2.
Azimuthal quantum number (l): For n = 1, the only possible value of l is 0 (s orbital), and for n = 2, the possible values of l are 0 (s orbital) and 1 (p orbital). Therefore, the first electron has l = 0 and the second electron has l = 0 or l = 1.
Magnetic quantum number (m): For l = 0, the only possible value of m is 0, and for l = 1, the possible values of m are -1, 0, and 1. Therefore, the first electron has m = 0, and the second electron has m = -1, 0, or 1.
Spin quantum number (s): Each electron has s = +1/2 or -1/2.
Thus, the set of quantum numbers for each electron in a ground-state Be atom is:
Electron 1: n = 1, l = 0, m = 0, s = +1/2 or -1/2
Electron 2: n = 2, l = 0 or 1, m = -1, 0, or 1, s = +1/2 or -1/2
To know more about electron configuration click this link -
brainly.com/question/29157546
#SPJ11
the current in a 100 watt lightbulb is 0.650 a . the filament inside the bulb is 0.240 mm in diam what is the electron current in the filament?
The electron current in the filament of a 100-watt lightbulb with 0.650 A current and a 0.240 mm diameter is 3.90 x 10^18 electrons per second.
To find the electron current in the filament, we first need to understand that current (I) is the flow of electric charge (Q) through a conductor over time (t). Mathematically, I = Q/t. In this case, we are given the current (I = 0.650 A) and we need to find the electron current, which represents the flow of electrons (number of electrons per second).
The elementary charge of an electron (e) is approximately 1.6 x 10^-19 coulombs. Therefore, we can rewrite the equation as I = (number of electrons * e) / t. Rearranging to solve for the number of electrons per second, we get:
Number of electrons per second = I * t / e = 0.650 A / (1.6 x 10^-19 C) = 3.90 x 10^18 electrons per second.
Learn more about electron current here:
https://brainly.com/question/31388971
#SPJ11
Item 4 The two circuits in (Figure 1) use identical batteries and wires of equal diameters. Figure 1 of 1 Part A Rank in order, from largest to smallest, the currents 11. 12. 13. and Iat points 1 to 4. Rank from largest to smallest. To rank items as equivalent, overlap them. Reset Help Largest Smallest
Based on the given circuit diagram, we can determine the order of currents l1, l2, l3, and l4 at points 1 to 4.
Here's the ranking from largest to smallest: I1 > I2 ≈ I3 ≈ I4
The reason for this ranking is as follows:
1. In the left circuit (points 1 and 2), the current splits into two branches at point 2.
Since the resistance in the left circuit is lower compared to the resistance in the right circuit, the current flowing through the left circuit (I1) will be larger than the current flowing through the right circuit (I2). Therefore, I1 is larger than I2.
2. At point 3, the currents from both circuits merge. Since the circuit configurations are identical and the wires have equal diameters, the current splits evenly between the two paths.
As a result, the current in each path will be the same, making I3 approximately equal to I4.
So, the ranking of the currents at points 1 to 4 is: I1 > I2 ≈ I3 ≈ I4.
Know more about circuit:
https://brainly.com/question/12608516
#SPJ12
three cars are driving along a road as seen below. the driver of the red car sounds a horn having a frequency of 1100 hz. the speed of sound on this day is 338 m/s. what tone does each driver hear?
The driver of the red car hears the horn at 1100 Hz, the driver of the blue car hears it at a slightly lower frequency, and the driver of the green car hears it at an even lower frequency.
When the red car driver sounds the horn, the sound wave travels through the air at a speed of 338 m/s. However, the blue car is moving towards the red car, so it intercepts the sound wave at a higher frequency, resulting in a slightly lower tone.
On the other hand, the green car is moving away from the red car, so it intercepts the sound wave at a lower frequency, resulting in an even lower tone. This phenomenon is known as the Doppler effect, which occurs when there is a relative motion between the observer and the source of the sound. The frequency heard by the observer depends on the relative motion and the speed of the sound wave.
Learn more about Doppler effect here:
https://brainly.com/question/15318474
#SPJ11
the knight from a chess set is placed to the left of a converging lens and an inverted image is formed at a distance 2f
In this scenario,
a chess knight is placed to the left of a converging lens, which means that light rays coming from the knight are refracted and converge to form an inverted image at a distance of 2f from the lens.
A converging lens, also known as a convex lens, has a thicker center and causes light rays to converge.
The distance between the lens and the image is twice the focal length (2f) because the light rays coming from the chess knight are parallel to the principal axis of the lens, and the converging lens bends these rays so that they meet at a point 2f away from the lens.
The inverted image that is formed is a result of the properties of the converging lens.
The image is real and inverted because the light rays converge to a point on the other side of the lens.
The size of the image depends on the distance between the object and the lens, as well as the focal length of the lens.
Overall, this scenario demonstrates the basic principles of optics and the behavior of light rays as they pass through a converging lens to form an image.
To know more about scenario refer here
brainly.com/question/30275614#
#SPJ11
Which of the following formulas would be used to directly calculate the kinetic energy of an object with mass m bouncing up and down on a spring with spring constant k? a. ke=1/2bkx2
b. ke=-1/2kx2
c. ke=1/2mv2
d. ke=-1/2mv2
The correct formula to directly calculate the kinetic energy (KE) of an object bouncing up and down on a spring with mass m and spring constant k is option c: [tex]KE = 1/2mv^2.[/tex]
In this scenario, the potential energy stored in the spring is converted into kinetic energy as the object oscillates. According to the law of conservation of energy, the total mechanical energy of the system remains constant. When the object is at its maximum displacement from the equilibrium position, it possesses maximum potential energy and zero kinetic energy.
As it passes through the equilibrium position, the potential energy becomes zero and is fully converted into kinetic energy. At the maximum displacement on the opposite side, the kinetic energy is at its maximum, and the potential energy is zero again. This cycle repeats as the object bounces up and down.
The formula [tex]KE = 1/2mv^2[/tex]relates kinetic energy (KE) to mass (m) and velocity (v). It demonstrates that kinetic energy is proportional to the square of the velocity and directly proportional to the mass of the object.
Therefore, option c is the correct choice for directly calculating the kinetic energy in this scenario.
To know more about Kinetic energy (KE) refer here
https://brainly.com/question/7850196#
#SPJ11
a 85-gram bouncy ball moving at 8.30 m/s to the right experiences an elastic collision with another ball, resulting in the 85-gram ball moving leftward at 16.0 m/s. the other ball has half the speed at the end as it had at the beginning, and is moving in the opposite direction it was at the beginning. find the mass and the initial speed of the other ball.
The mass of the other ball is 170 g, and its initial speed is 33.5 m/s. To solve this problem, we can use the conservation of momentum and the conservation of kinetic energy.
We know that the momentum before the collision is equal to the momentum after the collision, and that the total kinetic energy before the collision is equal to the total kinetic energy after the collision.
Let m be the mass of the other ball, and v be its initial velocity. Then we have:
Momentum before = Momentum after
85 g * 8.30 m/s = m * (v/2) + 85 g * (-16.0 m/s)
Solving for m, we get m = 170 g.
Next, we can use the conservation of kinetic energy to find v:
Kinetic energy before = Kinetic energy after
(1/2) * 85 g * (8.30 m/s)^2 = (1/2) * m * (v/2)^2 + (1/2) * 85 g * (16.0 m/s)^2
Solving for v, we get v = 33.5 m/s.
Therefore, the mass of the other ball is 170 g, and its initial speed is 33.5 m/s.
To know about energy:
https://brainly.com/question/1932868
#SPJ11
] Write the equation which links current, potential difference and resistance.
The equation that links current, potential difference, and resistance is known as Ohm's law, and it is given by V= IR
What is Ohm's law?The equation that links current (I), potential difference (V), and resistance (R) is known as Ohm's law, and it is given by:
V = I x R
where
V is the potential difference across the two ends of a conductorI is the current flowing through the conductorR is the resistance of the conductor.Ohm's law equation describes the relationship between these three fundamental electrical quantities, and it states that the potential difference across a conductor is directly proportional to the current flowing through it and inversely proportional to the resistance of the conductor.
More on Ohm's law can be found here: https://brainly.com/question/1247379
#SPJ1
Molecular spectra, like elemental one, involve only the vibration of the particles. ture or false?
False. While elemental spectra typically involve the emission or absorption of light due to electronic transitions within an atom, molecular spectra involve the vibration and rotation of the constituent atoms within a molecule.
Molecules have more degrees of freedom than atoms, which leads to more complex spectra. In addition to electronic transitions, the energy levels of molecules are also affected by their vibrational and rotational motion. When a molecule absorbs or emits light, it can undergo changes in both its electronic and vibrational/rotational states, leading to a more complex spectrum.
To know more about Molecular spectra click this link -
brainly.com/question/9520956
#SPJ11
A 0.6 kg piece of metal displaces 1 liter of water when submerged. What is its density?
The density of the metal can be calculated using the formula:
density = mass / volume
where mass is the mass of the metal and volume is the volume of water displaced by the metal.
Given that the mass of the metal is 0.6 kg and it displaces 1 liter (1000 cubic centimeters) of water, we can substitute these values into the formula:
density = 0.6 kg / 1000 cubic centimeters
Simplifying, we get:
density = 0.0006 kg/cubic centimeter
Therefore, the density of the metal is 0.0006 kg/cubic centimeter.
To know more about density of the metal click this link -
brainly.com/question/18836790
#SPJ11
a 28.0 kg solid cylinder is rolling without slipping across a horizontal surface at a speed of 8.4 m/s. how much work (in j) is required to stop it?
Answer:
Not enough information is given to determine the moment of inertia of the object, so the problem is not solvable as given
E = 1/2 M V^2 determines the lateral kinetic energy of the object but one must also consider the rotational energy E = 1/2 I ω^2
why does the interior of an evolved high-mass star have layers like an onion
The interior of an evolved high-mass star has layers like an onion due to the process of nuclear fusion.
As the star ages, it burns through its fuel, causing the core to contract and heat up. This increase in temperature triggers new fusion reactions that produce heavier elements and release even more energy. The resulting pressure and radiation push outwards, creating distinct layers of different elements and densities within the star. This process is known as nucleosynthesis and produces the layers within the high-mass star, similar to the layers within an onion. Each layer is formed by a different fusion reaction and contains a unique composition of elements, leading to the formation of complex structures within the star.
As nuclear fusion processes progress, the inside of an evolved high-mass star layers up like an onion, with each layer designating a location where a particular fusion reaction is occurring. This layering is a product of the star's core's shifting circumstances as it goes through several stages of nuclear burning.
To know more about nuclear fusion, click here;
https://brainly.com/question/14019172
#SPJ11
A stone of 600g is lowered into the water and the water level rises to 12cm. What is the volume of the stone
To find the volume of the stone, we can use the principle of displacement. When an object is placed in a liquid, it displaces a volume of liquid equal to its own volume.
First, we need to convert the weight of the stone from grams to kilograms. 600g is equal to 0.6kg.
Next, we need to determine the density of water. The density of water is 1 g/cm³.
Now, we can use the formula: Volume of stone = Volume of water displaced.
The water level rose by 12cm when the stone was lowered into it. Therefore, the volume of water displaced by the stone is 12cm³. Using the density of water, we can calculate the volume of the stone:
Volume of stone = Volume of water displaced
Volume of stone = 12cm³
Volume of stone = 0.012L
Therefore, the volume of the stone is 0.012L or 12mL. the volume of the stone is 0.012L (12mL).
The principle of displacement of the medium when two waves overlap is equal to the sum of the displacements of the two individual waves. This is the superposition principle. The displacement that results is the same as the total of each wave's individual displacements. As an illustration, the displacement induced by each wave is equivalent to the displacement of any component of a string.
Learn more about principle of displacement here
https://brainly.com/question/14093990
#SPJ11
The position of a small object is given by x = 34 + 10 − 2t2, where is in seconds and x in meters.
(a) Plot x as a function of t from t = 0 to t = 3.0 s. (b) Find the average velocity of the object between 0 and 3.0 s. (c) At what time between 0 and 3.0 s is the instantaneous velocity zero?
The instantaneous velocity is zero at t = 0 seconds.(a)
To plot x as a function of t, we can substitute values of t from 0 to 3.0 seconds into the equation x = 34 + 10 − 2t2. This gives us the following values of x: at t=0, x=34+10=44; at t=1.0, x=34+10−2(1.0)2=42; at t=2.0, x=34+10−2(2.0)2=30; at t=3.0, x=34+10−2(3.0)2=10. We can then plot these values on a graph to get the graph of x as a function of t.
(b) The average velocity of the object between 0 and 3.0 seconds can be found by dividing the change in position (x) by the change in time (t). The change in position is x(3.0) − x(0) = 10 − 44 = −34 meters, and the change in time is 3.0 − 0 = 3.0 seconds. Therefore, the average velocity is −34/3 = −11.3 m/s.
(c) The instantaneous velocity is given by the derivative of the position function, which is dx/dt = −4t. The instantaneous velocity is zero when −4t = 0, or when t = 0. Therefore, the instantaneous velocity is zero at t = 0 seconds.
To know about velocity :
https://brainly.com/question/18084516
#SPJ11
a ball of mass m falls vertically, hits the floor with a speed i u , and rebounds with a speed f u . what is the magnitude of the impulse exerted on the ball by the floor?
So, the magnitude of the impulse exerted on the ball by the floor is m(fu + iu).
To calculate the magnitude of the impulse exerted on the ball by the floor, we need to use the impulse-momentum theorem, which states that the impulse experienced by an object is equal to the change in momentum of that object.
The momentum of the ball just before it hits the floor can be calculated as p = m * i, where m is the mass of the ball and i is its initial velocity. Similarly, the momentum of the ball just after it rebounds can be calculated as p' = m * f, where f is its final velocity.
The change in momentum of the ball is then given by the equation Δp = p' - p, which can be simplified to Δp = m * (f - i). This represents the momentum that the ball gains or loses as a result of its collision with the floor.
According to the impulse-momentum theorem, the impulse experienced by the ball is equal to the change in momentum, so we can write:
J = Δp = m * (f - i)
Therefore, the magnitude of the impulse exerted on the ball by the floor is equal to m * |f - i|, where |f - i| represents the absolute value of the difference between the final and initial velocities.
In other words, the impulse exerted on the ball depends on the mass of the ball and the difference between its initial and final velocities. The magnitude of the impulse will be greater if the ball bounces back with a higher speed, and will be lower if it rebounds with a lower speed.
The magnitude of the impulse exerted on the ball by the floor can be calculated using the impulse-momentum theorem, which states that impulse equals the change in momentum.
Impulse = Δmomentum = m(final velocity) - m(initial velocity)
In this case, the initial velocity is -iu (downward direction) and the final velocity is +fu (upward direction). Therefore,
Impulse = m(fu) - m(-iu) = m(fu + iu)
To know more about momentum visit:-
https://brainly.com/question/24030570
#SPJ11
you are to throw a ball to the top of the leaning tower of pisa from the ground, by throwing it vertically upwards. what should be the initial velocity of the ball, so that it just reaches the top of the tower? take the vertical height of the tower as 154 m. ignore air resistance.
The initial velocity of the ball should be approximately 49.6 m/s to just reach the top of the leaning tower of Pisa when thrown vertically upwards from the ground, ignoring air resistance. To determine the initial velocity of the ball required to reach the top of the leaning tower of Pisa, we can use the formula for vertical motion:
v^2 = u^2 + 2as
Where v is the final velocity (zero, as the ball will reach its highest point and stop), u is the initial velocity, a is the acceleration due to gravity (-9.8 m/s^2), and s is the vertical distance traveled (154 m).
Substituting these values into the equation, we get:
0 = u^2 - 2(9.8)(154)
Simplifying, we get:
u = sqrt(2(9.8)(154))
u ≈ 49.6 m/s
Therefore, the initial velocity of the ball should be approximately 49.6 m/s to just reach the top of the leaning tower of Pisa when thrown vertically upwards from the ground, ignoring air resistance.
To know about velocity :
https://brainly.com/question/30559316
#SPJ11
100 POINTS NEED HELP ASSAP
What is the advantage of class 3 lever? (1 point)
O It decreases the distance over which force needs to be applied.
O It increases the mechanical advantage compared with other levers.
O It decreases the amount of work that needs to be done.
O It decreases the amount of force that needs to be applied.
Answer:
Explanation:
The advantage of a class 3 lever is that it can increase the distance over which an object can be moved with a relatively small amount of force. This means that the lever can be used to provide a mechanical advantage, allowing the user to exert a greater force on an object than would otherwise be possible. However, this comes at the expense of the lever's mechanical advantage compared to other types of levers, such as class 1 and class 2 levers. Therefore, the correct option is:O It increases the distance over which force needs to be applied.
The temperature of an example of CH4 gas (10.34g) in a 50.0L vessel at 1.33atm is___
A. 984
B. -195
C. 195
D. 1260
E. -1260
The temperature of the [tex]CH_4[/tex] gas is 195 K (Option C).
We can use the ideal gas law to solve this problem: PV = nRT
where P is the pressure in atm, V is the volume in L, n is the number of moles, R is the gas constant (0.0821 L·atm/mol·K), and T is the temperature in K.
First, we need to calculate the number of moles of [tex]CH_4[/tex] using its molar mass:
Molar mass of [tex]CH_4[/tex] = 12.01 g/mol (C) + 4(1.01 g/mol) = 16.05 g/mol
Number of moles of [tex]CH_4[/tex] = 10.34 g / 16.05 g/mol = 0.644 mol
Now, we can rearrange the ideal gas law to solve for T:
T = PV / (nR)
Substituting the given values, we get:
T = (1.33 atm) x (50.0 L) / (0.644 mol x 0.0821 L·atm/mol·K) = 195 K
Therefore, the temperature of the [tex]CH_4[/tex] gas is 195 K (Option C).
For more such questions on temperature, click on:
https://brainly.com/question/26866637
#SPJ11
in a double slit experiment, the spacing between the slits is exactly 5 times larger than the width of each slit. how many interference fringes are observed within the central diffraction maximum?
only one interference fringe is observed within the central diffraction maximum.
In a double-slit experiment, the interference pattern is created by the superposition of waves from two slits. The maxima and minima of the pattern occur when the waves from the two slits are either in phase or out of phase, respectively. The condition for constructive interference for two waves is given by:
d sin θ = mλ
where d is the distance between the slits, θ is the angle of diffraction, λ is the wavelength of light, and m is the order of the interference fringe.
In the central maximum, m = 0 and sin θ = 0. Therefore, d sin θ = 0, and there is no condition on the spacing between the slits and the width of each slit for the central maximum.
However, the number of interference fringes observed within the central diffraction maximum can be determined by considering the conditions for the first-order fringes on either side of the central maximum. For the first-order fringes, m = ±1, and sin θ = ±λ/d.
Given that the spacing between the slits is exactly 5 times larger than the width of each slit, we can assume that the slits are of equal width. Therefore, let the width of each slit be w and the spacing between the slits be 5w. Then, we have:
d = 6w
Substituting this value into the equation for the first-order fringes, we get:
sin θ = ±λ/6w
The condition for the fringes to be observed within the central maximum is that the angles of diffraction for the first-order fringes on either side of the central maximum must be less than the angle of the central maximum. Using the small angle approximation sin θ ≈ θ, we have:
θ ≈ λ/6w
Therefore, the number of interference fringes observed within the central diffraction maximum is:
N = 2θ/λ = 2(1/6) = 1/3
So, only one interference fringe is observed within the central diffraction maximum.
Learn more about diffraction here:
https://brainly.com/question/12290582
#SPJ11
a ball is kicked with an initial velocity of 10.3 m/s in the horizontal direction and 14.3 m/s in the vertical direction. at what speed does the ball hit the ground?
According to the statement the speed at which the ball hits the ground is v = 14.3 + 9.8 x 1.44 = 28.0 m/s.
To find the speed at which the ball hits the ground, we need to use the concept of projectile motion. When an object is thrown or kicked, it follows a curved path, and its velocity can be broken down into horizontal and vertical components. In this case, the initial velocity of the ball is 10.3 m/s in the horizontal direction and 14.3 m/s in the vertical direction.
The vertical velocity of the ball is affected by the force of gravity, which causes it to accelerate downwards at a rate of 9.8 m/s². Using the equation of motion, v² = u² + 2as, we can find the time it takes for the ball to hit the ground.
The initial vertical velocity is u = 14.3 m/s and the final velocity at impact is v = 0 m/s. The acceleration due to gravity is a = 9.8 m/s² and the distance traveled is s. Therefore, we can rearrange the equation to get s = (v² - u²)/2a.
Substituting the values, we get s = (0² - 14.3²)/2(-9.8) = 10.4 m. This means that the ball travels 10.4 meters in the vertical direction before hitting the ground.
To find the speed at which it hits the ground, we can use the formula, v = u + at, where u is the initial velocity, a is the acceleration due to gravity, and t is the time taken to hit the ground.
We have already calculated the time as t = √(2s/a) = √(2 x 10.4/9.8) = 1.44 seconds.
Therefore, the speed at which the ball hits the ground is v = 14.3 + 9.8 x 1.44 = 28.0 m/s.
In conclusion, the ball hits the ground with a speed of 28.0 m/s, which is the result of its initial velocity of 10.3 m/s in the horizontal direction and 14.3 m/s in the vertical direction, and the acceleration due to gravity in the vertical direction.
To know more about velocity visit :
https://brainly.com/question/30546049
#SPJ11
two parakeets sit on a swing with their combined center of mass 10.5 cm below the pivot. at what frequency do they swing?
According to the statement the frequency at which the two parakeets swing is approximately 1.35 Hz.
The frequency at which the two parakeets swing on the swing can be calculated using the formula:
f = 1/(2π) * sqrt(g/L)
Where f is the frequency, g is the acceleration due to gravity (9.8 m/s²), and L is the length of the swing.
In this case, we don't know the length of the swing, but we do know that the center of mass of the two parakeets is 10.5 cm below the pivot. This means that the distance from the pivot to the center of mass is half the length of the swing. So:
L = 2 * 10.5 cm = 21 cm = 0.21 m
Plugging this value into the formula, we get:
f = 1/(2π) * sqrt(9.8/0.21) ≈ 1.35 Hz
Therefore, the frequency at which the two parakeets swing is approximately 1.35 Hz.
To know more about frequency visit :
https://brainly.com/question/30783512
#SPJ11
Which state in the United States has the greatest tangential speed as Earth rotates around its axis?
The tangential speed of a point on the Earth's surface due to its rotation about its axis depends on its distance from the axis of rotation.
Points on the equator are farthest from the axis of rotation and therefore have the greatest tangential speed.
Therefore, the state in the United States that has the greatest tangential speed as Earth rotates around its axis is Hawaii. This is because Hawaii is the only state that lies entirely within the tropics, where the circumference of the Earth is greatest and the tangential speed due to rotation is highest. The tangential speed of a point on the equator is approximately 1670 kilometers per hour (1037 miles per hour).
Learn more about Earth here:
https://brainly.com/question/31064851
#SPJ11
Which of the following would DECREASE the grain size in an aluminum component that was cast from a molten metal melt?
A. Solidify at a different temperature that increases the nucleation rate.
B. Solidify at a different temperature that increases the growth rate for the solid nuclei.
C. Add MORE heterogeneous nucleating agents to the molten melt prior to solidification.
D. Add LESS heterogeneous nucleating agents to the molten melt prior to solidification.
Answer:
C
Explanation:
thats the right answer ksoemdk
Answer:
The correct answer is: A. Solidify at a different temperature that increases the nucleation rate.
Explanation:
The grain size of a metal is determined by the number of nuclei that form during solidification. The more nuclei that form, the smaller the grain size will be. The nucleation rate is increased by decreasing the temperature of the molten metal. This is because the lower temperature reduces the energy barrier for nucleation, making it more likely for nuclei to form.
The growth rate of the solid nuclei is also affected by the temperature. However, the effect of temperature on the growth rate is much smaller than the effect on the nucleation rate. Therefore, the best way to decrease the grain size is to solidify the metal at a lower temperature.
Adding more heterogeneous nucleating agents to the molten melt will also increase the nucleation rate and decrease the grain size. However, this is not as effective as decreasing the temperature. This is because the nucleating agents can only form nuclei at the surface of the molten metal. The lower temperature will cause nuclei to form throughout the molten metal, resulting in a smaller grain size.
Adding less heterogeneous nucleating agents to the molten melt will decrease the nucleation rate and increase the grain size. This is because the nucleating agents provide sites for nucleation to occur. Without the nucleating agents, it is more difficult for nuclei to form, resulting in a larger grain size.
