A roller coaster car may be approximated by a block of mass m. Thecar, which starts from rest, is released at a height h above the ground and slides along a frictionless track. The car encounters a loop of radius R. Assume that the initial height h is great enough so that the car never losses contact with the track.

Required:
a. Find an expression for the kinetic energy of the car at the top of the loop. Express the kinetic energy in terms of m, g, h, and R.
b. Find the minimum initial height h at which the car can be released that still allows the car to stay in contact with the track at the top of the loop.

Answer:

Explanation:

1 ) Since it is a isochoric process , heat energy passed into gas

= n Cv dT , n is no of moles of gas , Cv is specific heat at constant volume and dT is rise in temperature .

= 7.4 x 12.47 x ( 500 - 300 )

= 18455.6 J.

2 ) Since there is no change in volume , work done by the gas is constant.

3 ) from  , gas law equation

PV = nRT

P = nRT / V

= 7.4 x 8.3 x 500 / .74

= .415 x 10⁵ Pa.

4 ) Average kinetic energy  of gas molecules after attainment of final temperature

= 3/2 x R/ N x T

= 1.5 x 1.38  x 10⁻²³ x 500

= 1.035 x 10⁻²⁰ J

1/2 m v² = 1.035 x 10⁻²⁰

v² = 2 x 1.035 x 10⁻²⁰ / 1.39 x 10⁻²⁶

= 1.49 x 10⁶

v = 1.22 x 10³ m /s

5 )  In this process , pressure remains constant

gas is cooled from 500 to 300 K

heat will be withdrawn .

heat withdrawn

= n Cp dT

= 7.4 x 20.79 x 200

= 30769.2 J .

6 )

gas will have reduced volume due to cooling

reduced volume = .74 x 300 / 500

= .444 m³

change in volume

= .74 - .444

= .296 m³

work done on the gas

= P x dV

pressure x change in volume

= .415 x 10⁵ x .296

= 12284 J.

Answer:

1. 25 Km

2. zero

3. 27.7 m/s

Explanation:

Data provided in the question:

Circumference of the track = 12.5 km

Speed of the car = 100 Km/h

Time for which car travels = 15 minutes = [tex]\frac {15}{60}[/tex] hr

Now,

1. Distance traveled = Speed × Time

= 100 × [tex]\frac{15}{60}[/tex]

= 25 Km

2. The distance traveled is 2 times the circumference of the track (i.e 2 × 12.5 = 25 Km)

Which means that the car is again at the initial position

Therefore, The displacement is zero.

3. Speed of car in Km/hr = 100 Km/h

now,

1 Km = 1000 m

1 hr = 3600 seconds

therefore,

100 Km/h = [tex]100\times\frac{1000}{3600}[/tex] m/s

= 27.7 m/s

Hence, the speed of car in m/s = 27.7

Answer:

The power is  [tex]P_p = 4.6 \ W[/tex]

Explanation:

From the question we are told that

   The power delivered is  [tex]P_{s} = 1.15 \ W[/tex]

   Let it resistance be denoted as R

    The resistors are connected in series so the equivalent resistance is  

     [tex]R_{eqv} = R+ R = 2 R[/tex]

Considering when it is connected in series    

Generally power is mathematically represented as

     [tex]P_s = V * I[/tex]

Here I is the current which is mathematically represented as

       [tex]I = \frac{V}{2R}[/tex]

The power becomes

     [tex]P_s = V * \frac{V}{2R}[/tex]

     [tex]P_s = \frac{V^2}{2R}[/tex]

substituting value

    [tex]1.15 = \frac{V^2}{2R}[/tex]

Considering when resistance is connected in parallel

  The equivalent resistance becomes

    [tex]R_{eqv} = \frac{R}{2}[/tex]

So The current  becomes

       [tex]I = \frac{V}{\frac{R}{2} } = \frac{2V}{R}[/tex]

And the power becomes

     [tex]P_p = V * \frac{2V}{R} = \frac{2V^2}{R} = \frac{4 V^2}{2 R} = 4 * P_s[/tex]

 substituting values

     [tex]P_p = 4 * 1.15[/tex]

     [tex]P_p = 4.6 \ W[/tex]

Answer:

The length of organ pipe A is [tex]L = 0.3611 \ m[/tex]

The length of organ pipe B is  [tex]L_b = 0.2708 \ m[/tex]

Explanation:

From the question we are told that

    The fundamental frequency is  [tex]f = 475 Hz[/tex]

     The speed of sound is  [tex]v_s = 343 \ m/s[/tex]

The fundamental frequency of the organ pipe A  is mathematically represented as

        [tex]f= \frac{v_s}{2 L}[/tex]

Where L is the length of  organ pipe

   Now  making L the subject

        [tex]L = \frac{v_s}{2f}[/tex]

substituting values

        [tex]L = \frac{343}{2 *475}[/tex]

        [tex]L = 0.3611 \ m[/tex]

The second harmonic frequency of the  organ pipe A is mathematically represented as

       [tex]f_2 = \frac{v_2}{L}[/tex]

The third harmonic frequency of the  organ pipe B is mathematically represented as      

      [tex]f_3 = \frac{3 v_s}{4 L_b }[/tex]

So from the question

       [tex]f_2 = f_3[/tex]

So

    [tex]\frac{v_2}{L} = \frac{3 v_s}{4 L_b }[/tex]

Making  [tex]L_b[/tex] the subject

     [tex]L_b = \frac{3}{4} L[/tex]

substituting values

    [tex]L_b = \frac{3}{4} (0.3611)[/tex]

    [tex]L_b = 0.2708 \ m[/tex]

Answer:

32N

Explanation:

The Left force exerts an opposite horizontal force of 32N on the middle object

Answer:

D

Explanation:

Insoluble impurities would not change the constituent of the substance. Soluble would for example salt water takes longer time for the water to become vapour when subjected to the same temperature that normal water.

Wind would affect, the more windy the tendency for particles of the liquid to be moved into the atmosphere.

With an increase in surface area, the evaporation rate increase . Take a clue from water placed on the ground and exposed to the atmosphere and that same quantity of water is placed in a cup. That on the floor would evaporate faster.

Similarly the higher the temperature a substance is subjected to the easier is it's rate of evaporation. Take for instance water in a cup placed in the sun and that same placed in a room with mild temperatures than that of the sun.With time that in the sun decreases in volume faster than that in the room.

Answer:

6 gallons

Explanation:

At 30 mph, the fuel mileage is 25 mpg.

After 5 hours, the distance traveled is:

30 mi/hr × 5 hr = 150 mi

The amount of gas used is:

150 mi × (1 gal / 25 mi) = 6 gal

Answer: B, Companies passed on production and transportation costs to consumers

Explanation:

A higher oil price occurred when companies passed on production and transportation costs to consumers.

The oil producing companies spend so much money in producing crude oil from the reservoirs to the surface. They also spend money in processing and transporting the crude oil to the end users or consumers.

The final price of the oil depends on the total amount spent by these companies in producing the hydrocarbons.

Thus, a higher oil price occurred when companies passed on production and transportation costs to consumers.

Learn more about inflations here: https://brainly.com/question/1082634

Answer:

6.4 m/s

Explanation:

From the question, we are given that

Speed of the river, v(r) = 5 m/s

velocity relative to the water, v(w) = 4 m/s

Width of the river, d = 780 m

The magnitude of his velocity relative to the earth is v(m)

v(m) can be gotten by using the relation

[v(m)]² = [v(w)]² + [v(r)]²

[v(m)]² = 4² + 5²

[v(m)]² = 16 + 25

[v(m)]² = 41

v(m) = √41

v(m) = 6.4 m/s

thus, the magnitude of the velocity relative to earth is 6.4 m/s

Answer:

The average velocity of Jackson is 18.056 m/s South

The average velocity of Hunter is 10.65 m/s East

Explanation:

initial velocity of Jackson, u = 25 km/h east = 6.944 m/s east

time for this motion, [tex]t_i[/tex] = 20 minutes = 1200 seconds

⇒initial displacement of Jackson, [tex]x_i[/tex] = (6.944 m/s) x (1200 s) = 8332.8 m

Final velocity of Jackson, v =  45 km/h South = 12.5 m/s South

time at Jackson's final position, [tex]t_f[/tex] = 20 minutes + [tex]t_i[/tex] = 20 minutes + 20 minutes

time at Jackson's final position, [tex]t_f[/tex] = 40 minutes = 2400 s

⇒Final displacement of Jackson,[tex]x_f[/tex] = (12.5 m/s) x (2400 s) = 30,000m

Average velocity of Jackson;

[tex]= \frac{x_f-x_i}{t_f-t_i} \\\\= \frac{30,000-8332.8}{2400-1200} \\\\= 18.056 \ m/s \ South[/tex]

initial velocity of Hunter, u = 45 km/h South = 12.5 m/s South

time for this motion, [tex]t_i[/tex] = 10 minutes = 600 seconds

⇒initial displacement of Hunter, [tex]x_i[/tex] = (12.5 m/s) x (600 s) = 7500 m

Final velocity of Hunter, v =  40 km/h east = 11.11 m/s east

time at Hunter's final position, [tex]t_f[/tex] = 30 minutes + [tex]t_i[/tex] = 30 minutes + 10 minutes

time at Hunter's final position, [tex]t_f[/tex] = 40 minutes = 2400 s

⇒Final displacement of Hunter,[tex]x_f[/tex] = (11.11 m/s) x (2400 s) = 26,664m

Average velocity of Hunter;

[tex]= \frac{x_f-x_i}{t_f-t_o} \\\\= \frac{26,664-7500}{2400-600} \\\\= 10.65 \ m/s \ east[/tex]

Answer:

Explanation:

Givens

vi = 20 m/s

vf = 28 m/s

t = 2 seconds

Formula

a = (vf - vi) / t

Solution

a = (28 - 20)/2

a = 8/2

a = 4 m/s^2

Answer:

6,650 newtons

Explanation:

The computation of the force exerted on it by static friction is shown below:

Data provided in the question

Mass of car = m = 1,900 kg

speed = v = 14 m/s

radius = r = 56 m

Let us assume friction force be f

And, the Coefficient of friction = [tex]\mu[/tex]= 0.88

As we know that

[tex]f = \frac{mv^2}{r}[/tex]

[tex]= \frac{1,900 \times 14^2}{56}[/tex]

= 6,650 newtons

We simply applied the above formula so that the force exerted could come

Answer:

-2.24 m/s²

Explanation:

Given:

v₀ = 20 mi/hr = 8.94 m/s

v = 0 m/s

t = 4.0 s

Find: a

v = v₀ + at

0 m/s = 8.94 m/s + a (4.0 s)

a = -2.24 m/s²

Answer:

Approximately [tex]0.608[/tex] (assuming that [tex]g = 9.81\; \rm N\cdot kg^{-1}[/tex].)

Explanation:

The question provided very little information about this motion. Therefore, replace these quantities with letters. These unknown quantities should not appear in the conclusion if this question is actually solvable.

This answer will approach this question in two steps:

For simplicity, let [tex]a_{T}[/tex] represent the tangential acceleration ([tex]1.90\; \rm m \cdot s^{-2}[/tex]) of this car.

The question gave no information about the distance that the car has travelled before it skidded. However, information about the angular displacement is indeed available: the car travelled (without skidding) one-quarter of a circle, which corresponds to [tex]90^\circ[/tex] or [tex]\displaystyle \frac{\pi}{2}[/tex] radians.

The angular acceleration of this car can be found as [tex]\displaystyle \alpha = \frac{a_{T}}{r}[/tex]. ([tex]a_T[/tex] is the tangential acceleration of the car, and [tex]r[/tex] is the radius of this circular track.)

Consider the SUVAT equation that relates initial and final (tangential) velocity ([tex]u[/tex] and [tex]v[/tex]) to (tangential) acceleration [tex]a_{T}[/tex] and displacement [tex]x[/tex]:

[tex]v^2 - u^2 = 2\, a_{T}\cdot x[/tex].

The idea is to solve for the final angular velocity using the angular analogy of that equation:

[tex]\left(\omega(\text{final})\right)^2 - \left(\omega(\text{initial})\right)^2 = 2\, \alpha\, \theta[/tex].

In this equation, [tex]\theta[/tex] represents angular displacement. For this motion in particular:

Solve this equation for [tex]\omega(\text{final})[/tex] in terms of [tex]a_T[/tex] and [tex]r[/tex]:

[tex]\begin{aligned}\omega(\text{final}) &= \sqrt{2\cdot \frac{a_T}{r} \cdot \frac{\pi}{2}} = \sqrt{\frac{\pi\, a_T}{r}}\end{aligned}[/tex].

Let [tex]m[/tex] represent the mass of this car. The centripetal force at this moment would be:

[tex]\begin{aligned}F_C &= m\, \omega^2\, r \\ &=m\cdot \left(\frac{\pi\, a_T}{r}\right)\cdot r = \pi\, m\, a_T\end{aligned}[/tex].

Since the track is flat (not banked,) the only force on the car in the horizontal direction would be the static friction between the tires and the track. Also, the size of the normal force on the car should be equal to its weight, [tex]m\, g[/tex].

Note that even if the size of the normal force does not change, the size of the static friction between the surfaces can vary. However, when the car is just about to skid, the centripetal force at that very moment should be equal to the maximum static friction between these surfaces. It is the largest-possible static friction that depends on the coefficient of static friction.

Let [tex]\mu_s[/tex] denote the coefficient of static friction. The size of the largest-possible static friction between the car and the track would be:

[tex]F(\text{static, max}) = \mu_s\, N = \mu_s\, m\, g[/tex].

The size of this force should be equal to that of the centripetal force when the car is about to skid:

[tex]\mu_s\, m\, g = \pi\, m\, a_{T}[/tex].

Solve this equation for [tex]\mu_s[/tex]:

[tex]\mu_s = \displaystyle \frac{\pi\, a_T}{g}[/tex].

Indeed, the expression for [tex]\mu_s[/tex] does not include any unknown letter. Let [tex]g = 9.81\; \rm N\cdot kg^{-1}[/tex]. Evaluate this expression for [tex]a_T = 1.90\;\rm m \cdot s^{-2}[/tex]:

[tex]\mu_s = \displaystyle \frac{\pi\, a_T}{g} \approx 0.608[/tex].

(Three significant figures.)

Answer:

Explanation:

Given that:

width b=100mm

depth h=150 mm

length L=2 m =200mm

point load P =500 N

Calculate moment of inertia

[tex]I=\frac{bh^3}{12} \\\\=\frac{100 \times 150^3}{12} \\\\=28125000\ m m^4[/tex]

Point C is subjected to bending moment

Calculate the bending moment of point C

M = P x 1.5

= 500 x 1.5

= 750 N.m

M = 750 × 10³ N.mm

Calculate bending stress at point C

[tex]\sigma=\frac{M.y}{I} \\\\=\frac{(750\times10^3)(25)}{28125000} \\\\=0.0667 \ MPa\\\\ \sigma =666.67\ kPa[/tex]

Calculate the first moment of area below point C

[tex]Q=A \bar y\\\\=(50 \times 100)(25 +\frac{50}{2} )\\\\Q=250000\ mm[/tex]

Now calculate shear stress at point C

[tex]=\frac{FQ}{It}[/tex]

[tex]=\frac{500*250000}{28125000*100} \\\\=0.0444\ MPa\\\\=44.4\ KPa[/tex]

Calculate the principal stress at point C

[tex]\sigma_{1,2}=\frac{\sigma_x+\sigma_y}{2} \pm\sqrt{(\frac{\sigma_x-\sigma_y}{2} ) + (\tau)^2} \\\\=\frac{666.67+0}{2} \pm\sqrt{(\frac{666.67-0}{2} )^2 \pm(44.44)^2} \ [ \sigma_y=0]\\\\=333.33\pm336.28\\\\ \sigma_1=333.33+336.28\\=669.61KPa\\\\\sigma_2=333.33-336.28\\=-2.95KPa[/tex]

Calculate the maximum shear stress at piont C

[tex]\tau=\frac{\sigma_1-\sigma_2}{2}\\\\=\frac{669.61-(-2.95)}{2} \\\\=336.28KPa[/tex]

Answer:

F = 0.314 N

Explanation:

In order to calculate the applied force to the ball by the ground, you first calculate the speed of the ball just before it hits the ground. You use the following formula:

[tex]v^2=v_o^2+2gy[/tex]        (1)

y: height from the ball starts its motion = 1.8 m

vo: initial velocity = 0 m/s

g: gravitational acceleration =  9.8 m/s^2

v: final velocity of the ball = ?

You replace the values of the parameters in the equation (1):

[tex]v=\sqrt{2gy}=\sqrt{2(9.8m/s^2)(1.8m)}=5.93\frac{m}{s}[/tex]

Next, you take into account that the force exerted by the ground on the ball is given by the change, on time, of the linear momentum of the ball, that is:

[tex]F=\frac{\Delta p}{\Delta t}=m\frac{\Delta v}{\Delta t}=m\frac{v_2-v_1}{\Delta t}[/tex]      (2)

m: mass of the ball = 20g = 20*10^-3 kg

v1: velocity of the ball just before it hits the ground = 5.93m/s

v2: velocity of the ball after it impacts the ground (80% of v1):

0.8(5.93m/s) = 4.75 m/s

Δt: time interval o which the ground applies the force on the ball = 75*10^-3 s

You replace the values of the parameters in the equation (2):

[tex]F=(20*10^{-3}kg)\frac{4.75m/s-5.93m/s}{75*10^{-3}s}=-0.314N[/tex]

The minus sign means that the force is applied against the initial direction of the motion of the ball.

The applied force by the ground on the bouncy ball is 0.314 N

Answer:

To determine wavelength of a wave on a string.

Explanation:

The Standing Waves lab study the parameters that affect standing waves in various strings. The effects of string tension and density on wavelength and frequency will be studied.

Answer:

the statements the B is not true

Explanation:

In the stars the force of gravity tends to collapse them, by joining the atoms nuclear reactions that create an outward force until the two forces reach an equilibrium

The temperature of a star is a reflection of the energy within it and it is related to the intensity of the nuclear rations and not to the size of the stars

In examining the statements the B is not true

Answer:

Explanation:

  a )

from lens makers formula

[tex]\frac{1}{f} =(\mu-1)(\frac{1}{r_1} -\frac{1}{r_2})[/tex]

f is focal length , r₁ is radius of curvature of one face and r₂ is radius of curvature of second face

putting the values

[tex]\frac{1}{1.8} =(1.38-1)(\frac{1}{.5} -\frac{1}{r_2})[/tex]

1.462 = 2 - 1 / r₂

1 / r₂ = .538

r₂ = 1.86 cm .

= 18.6 mm .

b )

object distance u = 25 cm

focal length of convex lens  f  = 1.8 cm

image distance  v   = ?

lens formula

[tex]\frac{1}{v} - \frac{1}{u} = \frac{1}{f}[/tex]

[tex]\frac{1}{v} - \frac{1}{-25} = \frac{1}{1.8}[/tex]

[tex]\frac{1}{v} = \frac{1}{1.8} -\frac{1}{25}[/tex]

.5555 - .04

= .515

v = 1.94 cm

c )

magnification = v / u

= 1.94 / 25

= .0776

size of image = .0776 x size of object

= .0776 x 10 mm

= .776 mm

It will be a real image and it will be inverted.

Answer: A and D

a. Many objects move in arcs of circles or complete circles at times, and polar coordinates allowthe motion of such objects to be comprehended more easily. Some of Newton's laws in certaincases, such as calculation ofg from first principles, are much easier to calculate using polar coordinates.

b. "These coordinates are just used to confuse students.

c. ""Physics teachers are helping math teachers by getting students to practice theirtrigonometry.

d. ""In some cases, such as addition of forces, where a force magnitude is specified, it is simpler todescribe the forces in polar coordinates and be able to convert to the xy representation.

Explanation:

(A). Any force possessing a fixed magnitude and direction, it's always important to describe the for exactly as it is and also be able to convert it from one coordinate representation to another.

(D). Anything which involves radial motion(this is a motion along a radius) or motion along an arc of a circle or ellipse, this kind of motion is best explained and easily understood when in polar coordinates.

Answer:

a. 0.16240664737515434 moles

b. 67.5 degrees Celcius

Explanation:

a. Use Ideal Gas Equation

PV=nRT

Where P = pressure in pascals, V=Volume in cubic meters, n=number of moles, R is a constant=8.314 J/mol.K and T is temperature in Kelvin.

27C = 273+27=300Kelvin

volume 4L = 0.004m^3

Pressure = 1atm = 101325 Pascal

PV=nRT

101325Pa*0.004m^3=n*8.314J/mol.K*300K

Solving for n from the above you get n=0.16240664737515434 moles

b.Use combined gas law equation

P1*V1/T1=P2*V2/T2

P1= 1atm

V1=4L

T1=27C

P2= 4/16 L =0.25L

P=1*40 atm = 40atm

We do not know T2

USING THE FORMULA

(1atm*4L)/27C = (40atm*0.25L)/T2

(1*4)/27=(40*0.25)/T2

IF you simplify for T2, you get 67.5

Hence final temperature = 67.5 degrees Celcius

Answer:

12.0 V

Explanation:

Data :

Potential difference due to a single charge (+Q), E = 3.0 V

The Electric potential for the system of charges is given as:

[tex]E=\frac{1}{4\pi \epsilon_o}[\Sigma\frac{Q}{r}][/tex]

for single charge, E = 3.0 V = [tex]\frac{1}{4\pi \epsilon_o}[\frac{Q}{r}][/tex]  ->eq(1)

And for 4 charges:

[tex]E=\frac{1}{4\pi \epsilon_o}[4\frac{Q}{r}][/tex] -eq(2)

from eq(1) and (2) we have

E = 4 × 3.0 V = 12 V

Answer:

a) [tex]\Delta S_{in} = 2.791\,\frac{J}{K}[/tex], b) [tex]\Delta S_{out} = 6.897\,\frac{J}{K}[/tex], c) [tex]S_{gen} = 4.106\,\frac{J}{K}[/tex], d) Due to irreversibilities due to temperature differences.

Explanation:

a) The change in entropy of the hot reservoir is:

[tex]\Delta S_{in} = \frac{2400\,J}{860\,K}[/tex]

[tex]\Delta S_{in} = 2.791\,\frac{J}{K}[/tex]

b) The change in entropy of the cold reservoir is:

[tex]\Delta S_{out} = \frac{2400\,J}{348\,K}[/tex]

[tex]\Delta S_{out} = 6.897\,\frac{J}{K}[/tex]

c) The total change in entropy of the Universe is modelled after the Second Law of Thermodynamics. Let assume that process is steady:

[tex]\Delta S_{in} - \Delta S_{out} + S_{gen} = 0[/tex]

[tex]S_{gen} = \Delta S_{out} - \Delta S_{in}[/tex]

[tex]S_{gen} = 6.897\,\frac{J}{K} - 2.791\,\frac{J}{K}[/tex]

[tex]S_{gen} = 4.106\,\frac{J}{K}[/tex]

d) Since irreversibilities create entropy as process goes by. The main source of irreversibilities is the existence of temperature differences.

Answer:

0

Explanation:

if the volume remains constans, the works is 0 because the equation

W = P . ∆V

P = pressure

∆V = change in volume

Answer:

ma = 48.48kg

Explanation:

To find the mass of the astronaut, you first calculate the mass of the chair by using the information about the period of oscillation of the empty chair and the spring constant. You use the following formula:

[tex]T=2\pi\sqrt{\frac{m_c}{k}}[/tex]     (1)

mc: mass of the chair

k: spring constant = 600N/m

T: period of oscillation of the chair = 0.9s

You solve the equation (1) for mc, and then you replace the values of the other parameters:

[tex]m_c=\frac{T^2k}{4\pi^2}=\frac{(0.9s)^2(600N/m)}{4\pi^2}=12.31kg[/tex]    (2)

Next, you calculate the mass of the chair and astronaut by using the information about the period of the chair when the astronaut is sitting on the chair:

T': period of chair when the astronaut is sitting = 2.0s

M: mass of the astronaut plus mass of the chair = ?

[tex]T'=2\pi\sqrt{\frac{M}{k}}\\\\M=\frac{T'^2k}{4\pi^2}=\frac{(2.0s)^2(600N/m)}{4\pi^2}\\\\M=60.79kg[/tex] (3)

Finally, the mass of the astronaut is the difference between M and mc (results from (2) and (3)) :

[tex]m_a=M-m_c=60.79kg-12.31kg=48.48kg[/tex]

The mass of the astronaut is 48.48 kg

Complete Question

A small car and an SUV are at a stoplight. The car has amass equal to half that of the SUV, and the SUV's engine can produce a maximum force equal to twice that of the car. When the light turns green, both drivers floor it at the same time. Which vehicle pulls ahead of the other vehicle after a few seconds?

a) It is a tie.

b) The SUV

c) The car

Answer:

The correct option is  a

Explanation:

From the question we are told that

     The mass of the car is [tex]m_c[/tex]

     The force of the car is  F

       The mass of the SUV is  [tex]m_s = 2 m_c[/tex]

       The force of the SUV is [tex]F_s = 2 F[/tex]

Generally force  of the car is mathematically represented as

        [tex]F= m_ca_c[/tex]

[tex]a_c[/tex] is acceleration of the car

Generally force  of the car is mathematically represented as

       [tex]F_s = m_s * a_s[/tex]

[tex]a_s[/tex] is acceleration of the SUV

=>   [tex]2 F = 2 m_c a_s[/tex]

       [tex]F = m_c a_s[/tex]

=>    [tex]m_c a_s = m_ca_c[/tex]

So  [tex]a_s = a_c[/tex]

  This means that the acceleration of both the car and the SUV are the same

Answer: Short Answer: NO ( In Most Cases)

Explanation:

If that were true then planes couldn't get off the ground to fly. The front of the wing is cutting/pushing the air. On the top of the wing the air moves faster and on the bottom it moves slower making a upward draft giving the object the ability to fly or glide.

Answer:

The highest electric field is experienced by a 2 C charge acted on by a 6 N electric force. Its magnitude is 3 N.

Explanation:

The formula for electric field is given as:

E = F/q

where,

E = Electric field

F = Electric Force

q = Charge Experiencing Force

Now, we apply this formula to all the cases given in question.

A) A 2C charge acted on by a 4 N electric force

F = 4 N

q = 2 C

Therefore,

E = 4 N/2 C = 2 N/C

B) A 3 C charge acted on by a 5 N electric force

F = 5 N

q = 3 C

Therefore,

E = 5 N/3 C = 1.67 N/C

C) A 4 C charge acted on by a 6 N electric force

F = 6 N

q = 4 C

Therefore,

E = 6 N/4 C = 1.5 N/C

D) A 2 C charge acted on by a 6 N electric force

F = 6 N

q = 2 C

Therefore,

E = 6 N/2 C = 3 N/C

E) A 3 C charge acted on by a 3 N electric force

F = 3 N

q = 3 C

Therefore,

E = 3 N/3 C = 1 N/C

F) A 4 C charge acted on by a 2 N electric force

F = 2 N

q = 4 C

Therefore,

E = 2 N/4 C = 0.5 N/C

The highest field is 3 N, which is found in part D.

A 2 C charge acted on by a 6 N electric force

Answer:

Plutonium–238

Explanation:

The stability of isotopes is largely dependent on their half-life.

Half life of an isotope is the time taken for the initial mass of the isotope to be halfed or we can say that the half-life of an isotope is the time taken for the mass of the isotope to become half the initial mass.

From the above definition, we discovered that if the time taken for the mass of the isotope to become half its initial mass is long, then the isotope must be very stable. On the other hand, if the time taken to become half its initial mass is short, then the isotope is unstable because.

We can thus say that, the longer the half-life the more stable the isotope and the shorter the half-life, the less stable the isotope will be.

Considering the table given in the question above and with the ideas we have obtained from the explanation above, we can see that Plutonium–238 has the longest half-life. Therefore Plutonium–238 will be more stable.

Answer:

a) 98 m/s

b) 19.6 s

c)  1449.8 m

d)  29.6 s

e)  168.6 m/s

f)  46.8 s

Explanation:

Given that

Acceleration of the rocket, a = 5 m/s²

Altitude of the rocket, s = 960 m

a)

Using the equation of motion

v² = u² + 2as, considering that the initial velocity, u is 0. Then

v² = 2as

v = √2as

v = √(2 * 5 * 960)

v = √9600

v = 98 m/s

b)

Using the equation of motion

S = ut + ½at², considering that initial velocity, u = 0. So that

S = ½at²

t² = 2s/a

t² = (2 * 960) / 5

t² = 1920 / 5

t² = 384

t = √384 = 19.6 s

c)

Using the equation of motion

v² = u² + 2as, where u = 98 m/s, a = -9.8 m/s², so that

0 = 98² + 2(-9.8) * s

9600 = 19.6s

s = 9600/19.6

s = 489.8 m

The maximum altitude now is

960 m + 489.8 m = 1449.8 m

d)

Using the equation of motion

v = u + at, where initial velocity, u = 98 m, a = -9.8 m/s. So that

0 = 98 +(-9.8 * t)

98 = 9.8t

t = 98/9.8

t = 10 s

Total time then is, 10 + 19.6 = 29.6 s

e) using the equation of motion

v² = u² + 2as, where initial velocity, u = o, acceleration a = 9.8 m/s, and s = 1449.8 m. So that,

v² = 0 + 2 * 9.8 * 1449.8

v² = 28416.08

v = √28416.08

v = 168.6 m/s

f) using the equation of motion

S = ut + ½at², where s = 1449.8 m and a = 9.8 m/s

1449.8 = 0 + ½ * 9.8 * t²

2899.6 = 9.8t²

t² = 2899.6/9.8

t² = 295.88

t = √295.88

t = 17.2 s

total time in air then is, 17.2 + 29.6 = 46.8 s