A sample of an ideal gas is slowly compressed to one-half its original volume with no change in temperature. What happens to the average speed of the molecules in the sample

Answer:

5.20 grams of Br₂

Explanation:

From our previous knowledge;

We understand that:

The number of moles of a given element = mass of the element divided by its molar mass.

Mathematically:

[tex]\mathbf{no \ of \ moles =\dfrac{ mass}{ molar \ mass}}[/tex]

From the given information, let's assume that the 0.065 moles of liquid -bromine partake in the reaction.

From the periodic table, the molar mass of Bromine is = 79.9 g/mol

As such, the mass of liquid that partakes is calculated as:

0.065 mol  = mass/ 79.9 g/mol

mass = 0.065 mol × 79.9 g/mol

mass of liquid that partakes in the reaction = 5.20 grams of Br₂

Answer:

an alcohol is a Hydroxyl group due to the OH~ that is associated with it's molecules

The functional group found in an alcohol is Hydroxyl . Therefore, the correct option is option D.

A functional group in organic chemistry is a substituent and moiety inside a molecule that triggers the molecule's distinctive chemical processes. No matter how the rest of a molecule is made up, the very same functional group would experience the same or a similar set of chemical events.

This permits the design of synthetic chemistry as well as the methodical forecasting of chemical reactions as well as the behaviour of chemical molecules. Other functional groups close by can affect a functional group's reactivity. Retrosynthetic analysis can be used to design organic synthesis by using functional group interconversion. The functional group found in an alcohol is Hydroxyl .

Therefore, the correct option is option D.

To know more about functional group, here:

https://brainly.com/question/29263610

#SPJ7

Explanation:

Because molarity is mol/L, we'll have to convert 17g to mol.

After obtaining the mol, we'll divide that by the volume to obtain Molarity.

[tex]\\ \sf\longmapsto NH_3[/tex]

[tex]\\ \sf\longmapsto 14u+3(1u)[/tex]

[tex]\\ \sf\longmapsto 14u+3u[/tex]

[tex]\\ \sf\longmapsto 17u[/tex]

[tex]\\ \sf\longmapsto 17g/mol[/tex]

Moles of Ammonia:-

[tex]\boxed{\sf No\:of\:moles =\dfrac{Given\:mass}{Molar\:mass}}[/tex]

[tex]\\ \sf\longmapsto No\:of\:moles=\dfrac{17}{17}[/tex]

[tex]\\ \sf\longmapsto No\;of\:moles=1mol[/tex]

We know

[tex]\boxed{\sf Molarity=\dfrac{Moles\:of\:solute}{Volume\:of\: Solution\:in\:L}}[/tex]

[tex]\\ \sf\longmapsto Molarity=\dfrac{1}{0.50}[/tex]

[tex]\\ \sf\longmapsto Molarity=2M[/tex]

Answer:

5g/cm3

Explanation:

firstly convert the litres and kilograms to grams and centimeters.

1l is equivalent to 1000cm3

0.58×1000

580cm3

and 1kg is equivalent to 1000g

2.9×1000

2900

then find the density by using the formula

density=mass/volume

=2900g/580cm3

=5g/cm3

I hope this helps

Answer:

HClO₃(aq) + NaOH(aq) ⇒ NaClO₃(aq) + H₂O(l)

Explanation:

We have the products of a reaction and we have to predict the reactants. Since the products are salt and water, this must be a neutralization reaction. In a neutralization reaction, an acid reacts with a base. To form NaClO₃, the acid must be HClO₃(aq) and the base NaOH(aq). The balanced chemical equation is:

HClO₃(aq) + NaOH(aq) ⇒ NaClO₃(aq) + H₂O(l)

Answer:

N2 but i really didn't know

The compound that would be expected to be an electrolyte is : ( A ) N₂

An electrolyte is any subsatnce which conducts electircity when dissolved in a solvent such as water. From the question the compound that can conduct electricty when dissolved in water is N₂

Hence we can conclude that The compound that would be expected to be an electrolyte is : ( A ) N₂

Learn more about electrolyte : https://brainly.com/question/14308411

#SPJ2

Answer:

XCH₄ = 0.461

XCO₂ = 0.539

Explanation:

Step 1: Given data

Step 2: Calculate the total pressure in the container

We will sum both partial pressures.

P = pCH₄ + pCO₂

P = 431 mmHg + 504 mmHg = 935 mmHg

Step 3: Calculate the mole fraction of each gas

We will use the following expression.

Xi = pi / P

XCH₄ = pCH₄/P = 431 mmHg/935 mmHg = 0.461

XCO₂ = pCO₂/P = 504 mmHg/935 mmHg = 0.539

Answer:

Nutrients arw compounds in foods essential to life and heath

Answer: In simple terms nutrients are the energy that you get from food certain foods give more nutrients and others give close to none. That is what nutrients in your food is

Explanation:

Answer:

It is 1.25 moles

Explanation:

Molar mass of sulphur = 32 g

[tex]{ \bf{moles = \frac{given \: mass}{molar \: mass} }} [/tex]

Substitute:

[tex]{ \sf{moles = \frac{40}{32} }} \\ { \sf{ = 1.25 \: moles}}[/tex]

Answer:

The number of moles of strontium sulfide produced is:

= 1.663.

Explanation:

Chemical formula for strontium sulfide = SrS

Production of strontium sulfide = 199g

1 mole = 1 moles Strontium Sulfide, which is equal to 119.685 grams

The number of moles of strontium sulfide produced = 1.663 (199/119.685)

The number of moles of strontium sulfide produced is the dividend of the amount of strontium sulfide produced during the experiment divided by the mass of 1 mole.

Answer:

Al + MnO4- + 2H2O → Al(OH)4- + MnO2

Explanation:

First of all, we out down the skeleton equation;

Al + MnO4- → MnO2 + Al(OH)4-

Secondly, we write the oxidation and reduction equation in basic medium;

Oxidation half equation:Al + 4H2O + 4OH- → Al(OH)4- + 4H2O + 3e-

Reduction half equation:MnO4- + 4H2O + 3e- → MnO2 + 2H2O + 4OH-

Thirdly, we add the two half reactions together to obtain:

Al + MnO4- + 8H2O + 4OH- + 3e- → Al(OH)4- + MnO2 + 6H2O + 3e- + 4OH-

Lastly, cancel out species that occur on both sides of the reaction equation;

Al + MnO4- + 8H2O→ Al(OH)4- + MnO2 + 6H2O

The simplified equation now becomes;

Al + MnO4- + 2H2O → Al(OH)4- + MnO2

Answer:

6.2g of NaBr are produced

Explanation:

The reaction of HBr with NaOH occurs as follows:

HBr + NaOH → NaBr + H2O

Where 1 mole of each reactant produce 1 mole of NaBr

To solve this question we need to find the moles of each reactant using their molar mass. With moles we can find limiting reactant and the moles (And mass) of NaBr produced, as follows:

Moles HBr -Molar mass: 80.9119g/mol)-

4.9g * (1mol/80.9119g) = 0.0606 moles HBr

Moles NaOH -Molar mass: 40g/mol-

3.86g * (1mol/40g) = 0.0965 moles NaOH

As the reaction is 1:1 and the moles of HBr < Moles NaOH, the limiting reactant is HBr and moles of NaBr produced are 0.0606 moles.

The mass of NaBr (Molar mass: 102.894g/mol) is:

0.0606 moles * (102.894g/mol) =

Answer:

[tex]r=215pm[/tex]

[tex]N_{Mn}=20[/tex]

Explanation:

From the question we are told that:

Edge length of the unit cell [tex]l=608pm[/tex]

a)

Generally the equation for The relationship between edge length and radius is mathematically given by

[tex]4r=\sqrt{2a}[/tex]

Therefore

[tex]4r=\sqrt{2*608}[/tex]

[tex]r=\frac{\sqrt{2*608}}{4}[/tex]

[tex]r=215pm[/tex]

b)

From the question we are told that:

Density [tex]\rho=7.297[/tex]

Edge length of [tex]l=630.0 pm=>630*10^-{10}[/tex]

Therefore Volume  is given as

[tex]V=l^3[/tex]

[tex]V=630*10^-{10}^3[/tex]

[tex]V=2.50047*10^{−22}[/tex]

Generally the equation for Mass is mathematically given by

[tex]m=Volume*density[/tex]

[tex]m=V*\rho[/tex]

[tex]m=2.50047*10^{−22}*7.297[/tex]

[tex]m=1.83*10^{-21}g[/tex]

Therefore Molarity is given as

[tex]n=\frac{M}{Molar M}[/tex]

[tex]n=\frac{1.83*10^{-21}g}{55}[/tex]

[tex]n=3.32*10^{-23}[/tex]

Finally The atoms in a unit cell is

[tex]N_{Mn}=Moles*Avogadro\ constant[/tex]

[tex]N_{Mn}=3.32*10^{-23}*6.023*10^{23}[/tex]

[tex]N_{Mn}=20[/tex]

Answer:

The correct answer is "1.0100".

Explanation:

Let the volume of mixture be 100 ml.

then,

The volume of DMSO will be 10 mL as well as that of water will be 90 mL.

DMSO will be:

= [tex]10\times 1.1004[/tex]

= [tex]11.004 \ g[/tex]

The total mass of mixture will be:

= [tex]90+11.004[/tex]

= [tex]101.004 \ g[/tex]

Density of mixture will be:

= [tex]\frac{Mass}{Volume}[/tex]

= [tex]\frac{101.004}{100}[/tex]

= [tex]1.01004 \ g/mL[/tex]

hence,

Specific gravity of mixture will be:

= [tex]\frac{Density \ of \ mixture}{Density \ of \ water}[/tex]

= [tex]\frac{1.01004}{1}[/tex]

= [tex]1.0100[/tex]

Explanation:

here's the answer to your question about

Answer:

56%

Explanation:

If I use 25 grams of iron (III) phosphate and obtain 18.5 g of iron (III) sulfate, what is my percent yield?

Step 1: Write the balanced equation

2 FePO₄ + 3 Na₂SO₄ ⇒ Fe₂(SO₄)₃ + 2 Na₃PO₄

Step 2: Calculate the theoretical yield of Fe₂(SO₄)₃

The mass ratio of FePO₄ to Fe₂(SO₄)₃ is 301.64:399.88.

25 g FePO₄ × 399.88 g Fe₂(SO₄)₃/301.64 g FePO₄ = 33 g Fe₂(SO₄)₃

Step 3: Calculate the percent yield of Fe₂(SO₄)₃

We will use the following expression.

%yield = (experimental yield/theoretical yield) × 100%

%yield = (18.5 g/33 g) × 100% = 56%

Explanation:

Lanthanide series= E4

Boron=Si

Chalogen=O

Alkaline Earth metal =M9

Answer:

In 36 minutes, 100 grams of Chemical C is formed.

Explanation:

Combination of chemicals A and B = chemical C

Chemical A available = 100 grams

Chemical B available = 50 grams

Proportion of A mixed with C = A2

Proportion of B mixed with C = B1

Therefore, Chemical C = A2 + B1

If 25 grams of C is formed in 9 minutes

In one minute 25/9 grams of C will be formed

Therefore, in 36 minutes, 25/9 * 36 = 100 grams

The  structure of a compound C₆H₁₄ with a base peak at m/z 43 is none of these .

Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.

Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:

1)Molecular compounds where in atoms are joined by covalent bonds.

2) ionic compounds where atoms are joined by ionic bond.

3)Inter-metallic compounds where atoms are held by metallic bonds

4) co-ordination complexes where atoms are held by co-ordinate bonds.

They have a unique chemical structure held together by chemical bonds Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.

Learn more about compounds,here:

https://brainly.com/question/13516179

#SPJ6

The equilibrium constant K₁ = Equilbrium constant K₂.

The equilibrium constant, K, of a reaction, is defined as:

"The ratio between concentration of products powered to their reaction quotient and concentration of reactants powered to thier reaction quotient".

For the reaction:

aA + bB ⇄ cC + dD

The equilibrium constant, K, is:

[tex]K = \frac{[C]^c[D]^d}{[A]^a[B]^b}[/tex]

Now, assuming the reaction of the problem is 1:1:

A + B ⇄ C + D

[tex]K = \frac{[C][D]}{[A][B]}[/tex]

The concentrations of the reactants are directly proportional to the volume added. Thus, we can assume that concentration = Volume. Replacing for K₁ and K₂:

[tex]K_1 = \frac{[C][D]}{[10mL][10mL]} = K_1 = \frac{[C][D]}{100mL^2}[/tex]

In the same way:

[tex]K_2 = \frac{[C][D]}{[1mL][100mL]} = K_2 = \frac{[C][D]}{100mL^2}[/tex]

Thus, we can say:

Learn more about chemical equilibrium in:

https://brainly.com/question/4289021?referrer=searchResults

it's helpful

you can try this answer

Answer: A buffer solution reacts with basic solutions.

A buffer solution resists small changes in pH.

A buffer solution reacts with acidic solutions.

Explanation:

A buffer solution simply refers to an aqueous solution that consist of a mixture of a weak acid and the conjugate. From the options given, the ones application to a buffer solution include:

• A buffer solution reacts with basic solutions.

• A buffer solution resists small changes in pH.

• A buffer solution reacts with acidic solutions.

Answer:

When ionic compounds dissolve, they break apart into ions which are then able to conduct a current ( conductivity ). ... Many molecular compounds, such as sugar or ethanol, are nonelectrolytes. When these compounds dissolve in water, they do not produce ions.

Explanation:

Ethanol is an organic compound with an alcoholic functional group and is nonelectrolytes. Ethanol (CH₃CH₂OH) does not form ions in an aqueous solution. Thus, option B is correct.

Nonelectrolytes are substances that do not dissociate readily to yield ions and also are poor conductors of electricity and heat due to a lack of charged ions.

Ethanol is a nonelectrolyte that does not show conductivity and can be dissolved in water without producing ions. They cannot forms ions upon dissociation as covalent bonds are present.

Instead of ions that have covalent compounds that lack the ability to transfer the electron to conduct the electrical charge. Glucose, ethanol, etc. are some examples of a nonelectrolyte.

Therefore, option B. ethanol does not form ions is the correct blank.

Learn more about nonelectrolytes here:

https://brainly.com/question/14633704

#SPJ2

Answer:

Line graphs are used to track changes over short and long periods of time. When smaller changes exist, line graphs are better to use than bar graphs. Line graphs can also be used to compare changes over the same period of time for more than one group.

Answer:

a. 100.0 mL of 0.10 M NH₃ with 100.0 mL of 0.15 M NH₄Cl.

c. 50.0 mL of 0.15 M HF with 20.0 mL of 0.15 M NaOH.

Explanation:

A buffer system is formed in 1 of 2 ways:

Determine whether mixing each pair of the following results in a buffer.

a. 100.0 mL of 0.10 M NH₃ with 100.0 mL of 0.15 M NH₄Cl.

YES. NH₃ is a weak base and NH₄⁺ (from NH₄Cl ) is its conjugate base.

b. 50.0 mL of 0.10 M HCl with 35.0 mL of 0.150 M NaOH.

NO. HCl is a strong acid and NaOH is a strong base.

c. 50.0 mL of 0.15 M HF with 20.0 mL of 0.15 M NaOH.

YES. HF is a weak acid and it reacts with NaOH to form NaF, which contains F⁻ (its conjugate base).

d. 175.0 mL of 0.10 M NH₃ with 150.0 mL of 0.12 M NaOH.

NO. Both are bases.

385 x 42.13 x 0.079 = 1281.38395

Answer:

The answer is "[tex]32819.9 \ \frac{J}{mol}\\\\[/tex]"

Explanation:

[tex]Boron: 5^{B}\to 1s^2 2s^2 2p^1[/tex]

[tex]\Delta E=-2.18\times 10^{-18}\ \frac{J}{atom}\ (\frac{1}{\infity^2}-\frac{1}{n^2_{initial}})(z^2) (6.022\times 10^{23}\ \frac{atom}{mol})\\\\[/tex]

      [tex]=-2.18\times 10^{-18}\ \frac{J}{atom}\ (0-\frac{1}{1})(5^2) (6.022\times 10^{23}\ \frac{atom}{mol})\\\\ =2.18\times 10^{-18}\times 25 \times 6.022\times 10^{23}\ (\frac{J}{mol})\\\\ =328.199 \times 10^{5}\ (\frac{J}{mol})\\\\ =32819 \times 10^{3}\ (\frac{J}{mol})\\\\ =32819.9 \ (\frac{J}{mol})\\\\[/tex]

Answer:

A

Explanation:

it increase the rate of reaction when necessary

The chemical change that is  responsible for producing the heat that maintains the temperature of your body is metabolism.

Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.

There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

There are three types of chemical changes:

1) inorganic changes

2)organic changes

3) biochemical changes

During chemical changes atoms are rearranged and changes are accompanied by an energy change as new substances are formed.

Learn more about chemical changes,here:

https://brainly.com/question/23693316

#SPJ7