The statement is true because a sentinel value is a specific value that is used to signal the end of a loop or a program.
In programming, a loop often reads input from the user or from a file until a specific condition is met. The sentinel value is used to signal the end of the input and cause the loop to terminate.
For example, consider a program that reads a list of integers from the user until the user enters a sentinel value of -1 to indicate the end of the input. The program would use a loop to read the input values and check if each value is equal to the sentinel value. If the value is equal to the sentinel value, the loop would terminate, and the program would move on to the next step.
Sentinel values are often used in input validation and error handling to ensure that a program does not continue to run indefinitely or produce incorrect results due to unexpected input. By using a specific sentinel value to signal the end of input, a program can ensure that it processes only the intended input values and avoids errors or unexpected behavior.
Learn more about sentinel value https://brainly.com/question/28541937
#SPJ11
K-means algorithm with l¡ norm Note: For K- means algorithm with lı norm, you need to use median instead of mean when calculating the centroid. For details, you can check out this Wiki page. Cluster 1 Center: Cluster 1 Members: Cluster 2 Center: Cluster 2 Members
K-means is an unsupervised clustering algorithm that partitions a dataset into K clusters based on the similarity of their data points.
What is the K-means algorithm and how does it work?K-means is an unsupervised clustering algorithm that partitions a dataset into K clusters based on the similarity of their data points. It works by first randomly initializing K centroids, and then assigning each data point to the nearest centroid.
The centroids are then recalculated based on the mean (or median, in the case of l1 norm) of the points assigned to each cluster, and the process repeats until the centroids no longer move significantly or a maximum number of iterations is reached.
The algorithm aims to minimize the sum of squared distances between data points and their assigned centroid, known as the within-cluster sum of squares (WCSS).
Learn more about K-means algorithm
brainly.com/question/30461929
#SPJ11
a network engineer installs a new virtual private network set up dynamically according to traffic requirements and demand. what is the type of vpn installed?
As a virtual private network (VPN) is a secure and encrypted connection between two networks or devices over the internet, there are various types of VPNs that can be installed by a network engineer.
However, based on the given scenario, where a VPN is set up dynamically according to traffic requirements and demand, it seems like the type of VPN installed could be a Dynamic Multipoint VPN (DMVPN).
DMVPN is a type of VPN that allows for the creation of a dynamic, mesh VPN network without the need for preconfigured tunnels or static routes. This type of VPN is ideal for environments with changing traffic patterns, as it can adapt to changes in network topology and traffic demands in real-time.
In a DMVPN setup, multiple branch offices can connect to a central hub, which acts as a VPN concentrator. The hub dynamically creates and manages tunnels to the branch offices, based on traffic requirements and demand. This makes DMVPN a scalable and cost-effective solution for organizations that have a large number of remote sites or employees who need to access the corporate network securely.
Overall, a network engineer may choose to install a DMVPN setup to provide a secure, flexible, and scalable solution for remote access and site-to-site connectivity.
To know more about virtual private network (VPN) visit:
https://brainly.com/question/31608093
#SPJ11
Which two commands should you run to free up disk space?
The two commands that can be run to free up disk space are:
"rm" command to remove files or directories."du" command to identify large files or directories.To free up disk space, the "rm" command can be used to delete unwanted files or directories. By specifying the path to the file or directory, the "rm" command will permanently remove them from the system.
The "du" command, which stands for "disk usage," is used to analyze disk usage and identify large files or directories that are taking up significant space. By running the "du" command with appropriate options, such as "-h" to display sizes in a human-readable format, administrators can determine which files or directories are consuming the most disk space.
You can learn more about disk space at
https://brainly.com/question/30807004
#SPJ11
what is the output if x = 0, y = 1 and z = 1?A) 0B) 0.0C) 0.66666666666D) 0.67
Without any specific equation or context provided, it is not possible to or determine the output.
Why will be is the output when x = 0, y = 1, and z = 1?The values of x, y, and z alone do not provide sufficient information to perform any calculations or derive a specific result.
it is essential to have a mathematical expression, formula, or context in which x, y, and z are used.
Once you provide the necessary information, I'll be able to help you understand the calculations involved and provide a valid explanation of the output.
Learn more about determine
brainly.com/question/29898039
#SPJ11
Each user on the system has a subdirectory here for storage. What is it called?
The subdirectory for storage that is assigned to each user on the system is called a home directory.
A home directory is a dedicated directory on a computer system that is assigned to a specific user. It serves as the central location for storing and organizing the user's files, documents, and personal data. Each user on the system is assigned a unique home directory, which is typically identified by the username. The home directory provides a private space for the user to store and manage their files, and it allows for easy access and organization of personal data.
You can learn more about home directory at
https://brainly.com/question/31259178
#SPJ11
What type of texture is used to create faux texture on models?
A normal map is a type of texture used to create the illusion of fine surface details on 3D models without adding additional geometry.
It achieves this by encoding surface normal information into a texture, which simulates variations in surface angles and creates the appearance of bumps, grooves, or other intricate details on the model's surface. Normal maps are commonly used in real-time rendering to enhance the visual quality of models while maintaining performance.
By applying a normal map to a model, the surface can appear more realistic and detailed, even though the underlying geometry remains relatively simple. This technique is particularly useful for creating faux texture on models, as it can mimic the appearance of intricate details without the need for additional geometry or high-resolution textures.
You can learn more about 3D models at
https://brainly.com/question/27512139
#SPJ11
write a program that inputs an integer (0 - 9999) and outputs the number of digits. ex: if the input is: 7493 the output is: 4 digits ex: if the input is: 7 the output is: 1 digit
The first step is to get the input from the user using the input() function. We then need to convert the input from string to integer using the int() function.
Once we have the integer value, we can count the number of digits using a loop. We start by initializing a counter variable to zero and then divide the integer by 10 until it becomes zero. Each time we divide by 10, we increment the counter variable.
After the loop is done, we can output the number of digits using the print() function. We can format the output string using f-strings to include the input value and the number of digits.
Here's the code:
```
number = int(input("Enter an integer (0-9999): "))
count = 0
while number > 0:
number //= 10
count += 1
print(f"The number {number} has {count} digits.")
```
To know more about string visit:
brainly.com/question/30099412
#SPJ11
What has happened to the audience in the digital era of third and fourth screens?
The audience in the digital era of third and fourth screens has become more fragmented and harder to reach.
With the rise of smartphones and tablets, people are no longer just consuming content on traditional TV screens or computers. This has led to a fragmentation of the audience across multiple platforms and devices, making it harder for content creators and advertisers to reach them. Additionally, the ability to personalize and target content has made it more difficult to capture the attention of the audience, who now have an abundance of choices and the ability to quickly switch to other content.
As a result, the audience has become more elusive and harder to engage, and content creators and
must adapt to this new reality.
Learn more about audience here:
https://brainly.com/question/30435704
#SPJ11
Deprecated gradle features were used in this build, making it incompatible with gradle 8. 0.
The build is incompatible with gradle 8.0 because it used deprecated gradle features.
The term "deprecated" means that the feature is no longer recommended for use and may be removed in future versions of gradle. Therefore, using such features in your build can lead to compatibility issues with newer versions of gradle. To avoid this, it is best to update your build to use the latest recommended features and follow the guidelines provided by gradle.
Deprecated Gradle features are older methods, syntax, or functionality that are no longer recommended and will be removed in future Gradle versions.
To know more about Deprecated visit:-
https://brainly.com/question/30168668
#SPJ11
What character is the last one entered in every user response in C, C++ and Java when reading from standard input:
In C, C++, and Java, the last character entered in every user response when reading from standard input is the newline character ("\n").
The user presses the "Enter" key after typing their response, the newline character is added to the end of the input buffer.
This newline character indicates the end of the current line of input and is included in the input stream when it is read by the program using functions such as fgets() or getline() in C and C++, or Scanner.nextLine() in Java.
The newline character may not be the only character in the input buffer. Depending on the specific implementation of the program and the input method being used, there may be additional whitespace or control characters in the buffer before or after the newline character.
Programmers should take care to handle these characters appropriately when reading input from standard input.
When a user enters their response by pressing the "Enter" key, the input buffer is extended by a newline character.
When the input stream is read by the programme using methods like fgets() or getline() in C and C++, or Scanner, this newline character, which denotes the end of the current line of input, is included.Java's nextLine() method.
There can be other characters in the input buffer than the newline character. There may be extra whitespace or control characters in the buffer before or after the newline character, depending on the program's implementation and the input method being used.
For similar questions on standard input
https://brainly.com/question/28387387
#SPJ11
Virtual private networks are quick and easy to set up, but they are less secure than extranets.
The statement given "Virtual private networks are quick and easy to set up, but they are less secure than extranets." is false because virtual private networks (VPNs) are commonly used to establish secure connections over public networks, such as the internet.
VPNs utilize encryption and authentication protocols to ensure the confidentiality, integrity, and authenticity of data transmitted between network endpoints. They create a secure tunnel that allows remote users or networks to access resources in a private network securely. On the other hand, an extranet is a controlled network extension that allows authorized external entities, such as customers or partners, to access specific resources of an organization's internal network. While both VPNs and extranets serve different purposes, VPNs are designed with a strong emphasis on security and are considered a secure method for remote access and communication.
""
Complete question
Virtual private networks are quick and easy to set up, but they are less secure than extranets.
True
False
""
You can learn more about Virtual private networks at
https://brainly.com/question/14122821
#SPJ11
How many user cookies does an audience list require to be eligible for AdWords Search Ad remarketing?100100020005000
To be eligible for AdWords Search Ad remarketing, an audience list requires at least 100 user cookies.
So, the correct answer is A.
This means that your website must receive 100 unique visitors who accept cookies in order to create an audience list for remarketing.
However, it is important to note that while 100 user cookies is the minimum requirement, it is recommended to have at least 1,000 cookies to achieve optimal results.
This is because the larger the audience list, the more data AdWords has to work with to show your ads to the right people at the right time.
Larger audience lists also provide better statistical significance for testing and optimizing your remarketing campaigns.
Hence the answer of the question is A. 100
Learn more about user cookies at
https://brainly.com/question/30265305
#SPJ11
Micro-level skills include:
a. basic relationship-building and interviewing skills used with individual clients
b. skills for changing agency policies
c. group process skills
Micro-level skills are the foundation of social work practice and involve the basic relationship-building and interviewing skills used with individual clients. The correct option is a.
These skills enable social workers to build a trusting and supportive relationship with their clients, which is essential for effective intervention. Social workers also need to be skilled in conducting interviews with clients in a way that is respectful, non-judgmental, and sensitive to their needs. In addition to individual skills, social workers also need to have skills for changing agency policies.
This involves understanding the policies and procedures of the organization and advocating for changes that will benefit clients. This requires good communication skills, the ability to negotiate, and a good understanding of the political and social context in which the organization operates.
Finally, social workers need to have group process skills. These skills are essential for working with groups of clients, as well as for working with other professionals and stakeholders. Social workers need to be able to facilitate group discussions, manage conflict, and promote teamwork and collaboration.
Overall, micro-level skills are critical for social workers to be effective in their work and to make a positive impact on the lives of their clients. Hence, a is the correct option.
You can learn more about communication skills at: brainly.com/question/29468743
#SPJ11
which attack types is being carried out where a target is being sent unsolicited messages via bluetooth
An attack type is being carried out where a target is being sent unsolicited messages via bluetooth is called Bluejacking.
Bluejacking is a method where an attacker sends unsolicited messages or files via Bluetooth to a target device.
This type of attack exploits the Bluetooth connection and takes advantage of its relatively short range. The main purpose of Bluejacking is usually to prank or annoy the target, rather than causing serious harm.
However, it can potentially be used for more malicious purposes, such as sending malware or stealing sensitive information. To protect against Bluejacking, it is essential to keep your
Bluetooth turned off when not in use, enable security features, and avoid accepting unknown or suspicious file transfers. bluejacking is an attack in which wireless traffic is sniffed between bluetooth devices.
Learn more about bluejacking at
https://brainly.com/question/29222181
#SPJ11
Clusters of documents can be summarized by finding the top terms (words) for the documents in the cluster, e.g., by taking the most frequent k terms, where k is a constant, say 10, or by taking all terms that occur more frequently than a specified threshold. Suppose that K-means is used to find clusters of both documents and words for a document data set (a) How might a set of term clusters defined by the top terms in a document cluster differ from the word clusters found by clustering the terms with K-means? (b) How could term clustering be used to define clusters of documents?
(a) A set of term clusters defined means due to differences in the underlying data and clustering algorithms. (b) Term clustering can be used to define clusters of documents by grouping together documents that share common top terms.
How might a set of term clusters defined, and how could term clustering be used to define clusters of documents?(a) A set of term clusters defined by the top terms in a document cluster may not necessarily match the word clusters found by clustering the terms with K-means.
The top terms in a document cluster may be specific to the topic of the documents in that cluster, while the word clusters found by K-means may be based on co-occurrence patterns across all documents in the dataset. Therefore, the top terms in a document cluster may not align with the clusters found by K-means.
(b) Term clustering can be used to define clusters of documents by first clustering terms based on their co-occurrence patterns and then assigning each document to the cluster that contains the most similar set of terms.
This approach can help identify topics within a document dataset and group together documents that share similar themes.
Learn more about clusters
brainly.com/question/17288824
#SPJ11
What comes after the Service Type Field in an IP datagram? The ___ ___ field.
After the Service Type field in an IP datagram header, the next field is the Total Length field.
This field specifies the total length of the IP datagram, including both the header and the data payload, in bytes. It indicates the length of the entire packet, starting from the IP header to the end of the data. The Total Length field is a 16-bit field, allowing it to represent values ranging from 0 to 65535. It plays a crucial role in the proper fragmentation and reassembly of IP packets.
Thus, the field that comes after the Service Type Field in an IP datagram is the "Total Length" field.
You can learn more about IP datagram at
https://brainly.com/question/22238625
#SPJ11
Assume the workbook has five worksheets named Mon, Tues, Wed, Thu, and Fri. A sixth worksheet is added with the name summary. Which command sheet should be placed in cell A1 of the summary sheet to add the values from cells A1 of each of the five sheets?
The formula "=SUM(Mon:Fri!A1)" should be placed in cell A1 of the summary sheet.
The formula "=SUM(Mon:Fri!A1)" uses the SUM function to add the values in cell A1 of the Mon, Tues, Wed, Thu, and Fri worksheets. The range Mon:Fri specifies the worksheets to include in the calculation, and the exclamation point (!) separates the worksheet name from the cell reference.
By placing this formula in cell A1 of the summary sheet, the sum of the values in cell A1 of each of the five sheets will be displayed. This formula can be adjusted to include different ranges or cells as needed, depending on the specific data to be summarized.
For more questions like Formula click the link below:
https://brainly.com/question/30154189
#SPJ11
TRUE/FALSE. host based firewalls are used to permit/deny connections to selective services on a give host from specific network or ip ranges
The statement is true because that is one of the main functions of a host-based firewall.
A host-based firewall is a software-based security system that is installed on individual hosts or servers to protect them from unauthorized access and network-based attacks. Host-based firewalls are designed to filter incoming and outgoing network traffic based on various criteria, such as source and destination IP addresses, ports, protocols, and applications.
By using a host-based firewall, an administrator can define rules that specify which services, applications, or ports are allowed or denied access from specific network or IP ranges. For example, an administrator can configure a host-based firewall to allow incoming SSH connections only from a specific IP range, or to deny all incoming traffic except for HTTP and HTTPS traffic.
Learn more about host-based firewall https://brainly.com/question/30006064
#SPJ11
___________ is an alternative to apt and is a high-level interface to the package manager.
Dpkg is an alternative to apt and is a high-level interface to the package manager.
Dpkg is a command-line tool and package manager used in Debian-based operating systems. It provides a higher-level interface to manage packages compared to the lower-level package manager apt. Dpkg is responsible for installing, building, removing, and managing Debian packages on the system. It handles operations such as package installation, removal, and configuration.
Dpkg works in conjunction with other tools like dpkg-deb for package creation and dpkg-query for querying package information. It offers more control and flexibility in managing packages and is commonly used in Debian-based distributions.
You can learn more about Dpkg at
https://brainly.com/question/31088014
#SPJ11
74. The purpose of Data Control Language is:
a. Define which users are able to view and manipulate data in a database
b. Define data structures in a relational database
c. Define data structures in an object-oriented database
d. Retrieve, insert, delete and update data in a relational database
A. The purpose of Data Control Language (DCL) is to define which users are able to view and manipulate data in a database.
DCL is a subset of SQL (Structured Query Language) that is used to define access privileges and permissions for database objects such as tables, views, and procedures. DCL commands such as GRANT and REVOKE allow database administrators to specify which users or groups are authorized to access, modify, or delete data in the database. By controlling access to sensitive data, DCL helps to ensure the security and integrity of the database and protect against unauthorized access and data breaches.
To learn more about database click on the link below:
brainly.com/question/30407588
#SPJ11
What MuleSoft product enables publishing, sharing, and searching of APIs?
- API Designer
- API MUnit
- API Exchange
- API Notebook
The MuleSoft product that enables publishing, sharing, and searching of APIs is the API Exchange.
This platform provides a centralized location for API providers and consumers to collaborate and explore available APIs, promoting seamless integration and reuse.
The MuleSoft product that enables publishing, sharing, and searching of APIs is API Exchange.
API Exchange is a platform where API providers can publish their APIs and make them available for discovery and consumption by other developers.
It allows API providers to create a listing for their APIs, including documentation, testing, and other resources.
It also provides API consumers with a marketplace to discover and access APIs, along with tools for testing and trying out those APIs.
API Designer is a tool for designing and documenting APIs, API MUnit is a unit testing framework for APIs, and API Notebook is a web-based tool for exploring and testing APIs.
For similar question on MuleSoft.
https://brainly.com/question/30458344
#SPJ11
You should always paint model textures at the minimum resolution required (T/F):
The given statement "You should always paint model textures at the minimum resolution required" is false because higher resolution textures can improve the quality and detail of the model.
The resolution of a texture determines how much detail it can display. Painting textures at the minimum resolution required may save memory and reduce processing time, but it can also limit the quality and realism of the model. If the texture resolution is too low, it may appear blurry or pixelated when viewed up close.
To achieve a high level of detail and realism, it is often necessary to use higher resolution textures. However, using excessively high resolutions can also lead to performance issues, so it is important to find a balance between detail and efficiency.
Ultimately, the texture resolution should be chosen based on the specific requirements of the project and the limitations of the target platform.
For more questions like Painting click the link below:
https://brainly.com/question/16906282
#SPJ11
You can create a _____ to define what data values are allowed in a cell. Custom error macro conditional formatting rule validation rule
You can create a validation rule to define what data values are allowed in a cell.
What is the data value?A validation rule is a feature usually found in computer program programs like Microsoft Excel and Sheets that allows you to designate certain tests that must be met before a dossier entry is customary.
For example, you can create a confirmation rule that requires a container to contain any between 1 and 100, or a rule that requires a container to contain a date in the format. If a consumer attempts to enter data that does not meet the particularized criteria, a warning meaning will be displayed, and the consumer will be prompted to correct the entrance before it can be acknowledged.
Learn more about data value from
https://brainly.com/question/19243813
#SPJ4
data mining requires specialized data analysts to ask ad hoc questions and obtain answers quickly from the system.T/F
The given statement "data mining requires specialized data analysts to ask ad hoc questions and obtain answers quickly from the system" is TRUE, Data mining involves analyzing large amounts of data to extract useful information.
This process requires specialized data analysts who have expertise in working with different data mining tools and techniques.
These analysts are responsible for asking ad hoc questions and obtaining answers quickly from the system.
They also need to be skilled in data preprocessing, data modeling, and data visualization to uncover hidden patterns and insights from the data.
Without skilled data analysts, the data mining process can be challenging and time-consuming, which can delay decision-making and affect business outcomes.
Therefore, having specialized data analysts is crucial for successful data mining initiatives.
Learn more about data mining at
https://brainly.com/question/2596411
#SPJ11
How many bits long is the TTL field in an IP datagram? ___ bits
The TTL (Time-to-Live) field in an IP datagram is 8 bits long.
This field is crucial in controlling the maximum number of hops a packet can traverse before being discarded.
The initial value is set by the sender, and at each hop, the value is decreased by one.
When the TTL reaches zero, the packet is discarded, preventing it from circulating indefinitely within the network.
The 8-bit length of the TTL field allows for a range of 0 to 255, providing sufficient control over the packet's lifespan.
Learn more about TTL at
https://brainly.com/question/31845876
#SPJ11
A view that involves statistics calculated from one or more base tables is the easiest view when attempting to update data. T/F
False. Views that involve statistics calculated from one or more base tables are known as materialized views.
Materialized views store the results of a query as a physical table, which can improve performance for frequently executed queries by avoiding the need to re-run the query each time it is executed. However, materialized views can be more difficult to update than regular views because they are physically stored in the database and require additional maintenance to keep them in sync with the base tables. When the base tables are updated, the materialized view must also be updated to reflect the changes. In contrast, regular views do not store data physically, but rather define a virtual table that is based on one or more tables in the database. They are generally easier to update because they do not require additional maintenance to keep them in sync with the base tables. However, not all views can be updated depending on the query structure and complexity.
Learn more about base tables here:
https://brainly.com/question/30169143
#SPJ11
Where is the default Tool Center Point?
A. Intersection of J1 and J2
B. Center of faceplate
C. Tip of the default tool
D. FANUC robots do not use Tool Center Points
The default Tool Center Point (TCP) in FANUC robots is located at the center of the faceplate. Option B is answer.
The default Tool Center Point (TCP) in FANUC robots is located at the center of the faceplate. The faceplate refers to the front surface of the robot arm where the end effector or tool is attached. It is the reference point for positioning and movement calculations during robot programming. The TCP represents the specific point on the tool that is considered the effective center for performing tasks and interacting with objects in the robot's workspace.
By default, FANUC robots assume that the TCP is located at the center of the faceplate. This allows for consistent and predictable positioning of the tool during robot operations. Option B is the correct answer.
You can learn more about FANUC robots at
https://brainly.com/question/12101437
#SPJ11
To qualify a column name, precede the name of the column with the name of the table, followed by a(n) ____.
a. asterisk (*)
b. period (.)
c. comma (,)
d. percent sign (%)
To qualify a column name, precede the name of the column with the name of the table, followed by a(n) period (.). Correct Option: b. period (.)
When referring to a column name in SQL, it is important to include the name of the table to avoid ambiguity or confusion when multiple tables are involved in a query.
The table name is followed by a period (.) and then the name of the column. For example, if we have a table called "employees" and a column called "salary", we would refer to it as "employees.salary".
It is also important to note that if the column name contains spaces or special characters, it should be enclosed in square brackets. For example, if we have a column called "employee name" in our "employees" table, we would refer to it as "employees.[employee name]".
Using proper syntax when writing SQL queries is crucial to ensure accurate results and prevent errors. Remember to always include the table name before the column name, separated by a period.
This will help to ensure that your queries are clear and unambiguous, making it easier to understand and maintain your database.
Visit here to learn more about Column:
brainly.com/question/22085941
#SPJ11
a valid ph is in the range . write a function called phfunction that receives a real number corresponding to a ph and returns a string scalar variable message.
The function first checks if the pH value is within the valid range of 0 to 14. If the pH is outside this range, it returns an error message indicating that the pH value is invalid. If the pH is within the valid range, the function then checks if the pH is acidic, neutral, or basic, and returns an appropriate message.
Here is an example function called "phfunction" in MATLAB that receives a real number corresponding to a pH and returns a string scalar variable message:
function message = phfunction(ph)
% Check if pH value is valid
if ph < 0 || ph > 14
message = 'Invalid pH value. pH must be between 0 and 14.';
% Check if pH is acidic
elseif ph > 0 && ph < 7
message = 'The pH is acidic.';
% Check if pH is neutral
elseif ph == 7
message = 'The pH is neutral.';
% Check if pH is basic
elseif ph > 7 && ph <= 14
message = 'The pH is basic.';
end
For example, if we call the function with a pH value of 4.5, it will return the message "The pH is acidic." If we call the function with a pH value of 7, it will return the message "The pH is neutral." If we call the function with a pH value of 10, it will return the message "The pH is basic."
To know more about function,
https://brainly.com/question/12976929
#SPJ11
On error propagate inside of a private flow uses what error message? explain.
On error propagate inside of a private flow uses a generic error message, such as "An error has occurred".
When an error occurs within a private flow, the flow will typically propagate the error back to the calling process using an "on error propagate" construct.
If the error message is not explicitly defined within the flow, then a generic error message, such as "An error has occurred," will be used.
This is because the flow is considered to be a black box to the calling process, and it is assumed that the calling process does not have visibility into the details of the error.
It is generally good practice to provide a descriptive error message within the flow whenever possible, so that the calling process can better understand the nature of the error and take appropriate action.
This can help to improve the overall reliability and maintainability of the integration solution.
For more such questions on Error propagate:
https://brainly.com/question/16034758
#SPJ11
