The bearing from the port to the ship is approximately North-28.17 degrees-East. This is calculated by finding the angle formed by the two legs of a right triangle, where the opposite side is 3 miles and the adjacent side is 9 miles.
Let's assume that the ship starts at point S, and the port is at the origin (0,0). Then, the ship's initial direction of North-25 degrees-West means that it's heading towards the point that is 25 degrees clockwise from the West direction, which is equivalent to the point (-cos(25),sin(25)) on the unit circle.
After traveling 3 miles in that direction, the ship ends up at point P1 (-3cos(25),3sin(25)).
Next, the ship turns right and travels 9 miles, which takes it to point
P2 (-3cos(25)+9sin(25),3sin(25)+9cos(25)).
To find the bearing from the port to the ship at this point, we need to find the angle that the line segment from the origin to P2 makes with the positive x-axis. Let θ be this angle. Then, we have
tan(θ) = (3sin(25)+9cos(25))/(-3cos(25)+9sin(25))
Using a calculator, we can find that tan(θ) is approximately -1.32. Therefore, we have
θ = arctan(-1.32) = -52.83 degrees
Since the bearing is measured clockwise from the North direction, the bearing from the port to the ship is
360 - (25 + 52.83) = 282.17 degrees
Rounding to the nearest hundredth, we get the final answer of 282.17 degrees. Therefore, the bearing from the port to the ship is approximately North-28.17 degrees-East.
To know more about direction of ship:
https://brainly.com/question/29713416
#SPJ4
What is the length of the unknown side of this right triangle? (DO NOT
ESTIMATE)
Step-by-step explanation:
Right triangles obey Pythagorean theorem :
?^2 = 2^2 + 9^2
?^2 = 85
? = sqrt 85 ft
Answer:
85ft
Step-by-step explanation:
5. Let's write the elements of the following well-defined collections as the member of sets. Express each set in diagramatic method. a) A collection of four gases found in the atmosphere. b) A collection of letters of the word 'LAPTOP'. c) A collection of natural numbers less than 10. d) A collection of composite numbers less than 10.
a) diagram: nitrogen - oxygen - argon - carbon dioxide
b) {L, A, P, T, O} represented as diagram: L - A - P - O - T
c) {1, 2, 3, 4, 5, 6, 7, 8, 9} represented as {1...9}
d) {4, 6, 8, 9} represented as diagram: 4 - 6 - 8 - 9
a) The collection of four gases found in the atmosphere can be represented as the set {nitrogen, oxygen, argon, carbon dioxide}. The set can be diagrammatically represented as:
nitrogen
/ \
oxygen argon
\ /
carbon dioxide
b) The collection of letters of the word 'LAPTOP' can be represented as the set {L, A, P, T, O}. The set can be diagrammatically represented as:
L
|
A
|
P--O--T
c) The collection of natural numbers less than 10 can be represented as the set {1, 2, 3, 4, 5, 6, 7, 8, 9}. The set can be diagrammatically represented as:
{1, 2, 3, 4, 5, 6, 7, 8, 9}
d) The collection of composite numbers less than 10 can be represented as the set {4, 6, 8, 9}. The set can be diagrammatically represented as:
4 -- 6 -- 8
|
9
Learn more about Composite numbers here
brainly.com/question/28199758
#SPJ1
For each scenario you will not complete the hypothesis test or confidence interval, but only select what kind of test statistic is described.
A. One sample z-test for a mean E. Two sample t-test for means independent
B. One sample t-test for a mean F. One sample z-test for a proportion
C. Matched pairs difference in means G. One sample t-test for a proportion
D. Two sample z-test for means independent I. None of the above
H. Two sample z-test for p1-p2
(choose the letter above)
1) A nutrician major separates 60 volunteers into the 55 who like Ovaltine and the 5 people who don't. IQ tests are given to the volunteers. She questions whether Ovaltine preference matters at all. Perhaps they have the same IQ on average with the same standard deviation. She wants to test if those who like Ovaltine have a higher IQ on average by assuming normality.
2) An engineering major wants to estimate the difference in tensile strength between oak wood beams and elm wood beams. She believes the standard deviations should be equivalent. She gathers 50 beams of each type and tests their tensile strength.
G. One sample t-test for a proportion.
The nutrition major wants to test if there is a difference in IQ between those who like Ovaltine and those who don't. Since she is comparing proportions, she should use a one-sample t-test for a proportion.E. Two sample t-test for means independent.
The engineering major wants to estimate the difference in tensile strength between two types of wood beams. Since she has two independent samples and wants to compare their means, she should use a two-sample t-test for means independent.A. In scenario 1, the nutrition major is interested in comparing the mean IQ scores of two groups: those who like Ovaltine and those who don't. Since the sample size of the group who don't like Ovaltine is small (n=5), it's not appropriate to use a z-test. Instead, a one-sample t-test for a mean can be used to compare the mean IQ scores of those who like Ovaltine to a hypothesized population mean (which could be the population mean IQ score, assuming that Ovaltine preference doesn't affect IQ).
B. In scenario 2, the engineering major is interested in comparing the means of two independent groups (oak wood beams and elm wood beams) with equivalent standard deviations. Since the sample sizes are both 50 and the standard deviation of the population is unknown, a two-sample t-test for means can be used to compare the means of the two groups.
C. In a matched pairs difference in means scenario, each subject in a sample is paired with another subject based on some characteristic that affects the outcome of the study (such as age, weight, or gender). In this scenario, the difference in scores between each pair of subjects is calculated, and a one-sample t-test can be used to determine whether the average difference between the two groups is statistically significant.
D. In a two-sample z-test for means scenario, the researcher is interested in comparing the means of two independent groups with known population variances. This type of test is rarely used in practice since population variances are usually unknown.
E. In a two-sample t-test for means independent scenario, the researcher is interested in comparing the means of two independent groups with unknown population variances. This is the most commonly used test for comparing the means of two independent groups.
F. In a one-sample z-test for a proportion scenario, the researcher is interested in testing whether a sample proportion is significantly different from a hypothesized population proportion.
G. In a one-sample t-test for a proportion scenario, the researcher is interested in testing whether a sample proportion is significantly different from a hypothesized population proportion when the sample size is small and/or the population variance is unknown.
H. In a two-sample z-test for the p1-p2 scenario, the researcher is interested in comparing two proportions in two independent groups with known population variances.
I. If none of the above tests are appropriate for a particular scenario, then another type of test (such as a chi-square test or ANOVA) may be needed.
Learn more about t-test
https://brainly.com/question/6501190
#SPJ4
Rearrange your equation from part A by setting it equal to 0 and substituting y for 0. Then write the equation in the form y=(x-h)^2-c
Rearrange the equation from part A, we get y = (x - 1)^2 - 8
Rearrange the equation from part AFrom the comlete question, the equation from part A
y = x^2 - 2x - 7
To rearrange the equation, we have the following
y = x^2 - 2x - 7
Set to 0
So, we have
x^2 - 2x - 7 = 0
This gives
x^2 - 2x = 7
Take the coefficient of x; divide it by 2 and then add the squared quotient to both sides
So, we have
x^2 - 2x + 1 = 7 + 1
Factorize
(x - 1)^2 = 8
So, we have
(x - 1)^2 - 8 = 0
Replace 0 with y
y = (x - 1)^2 - 8
Hence, the equation is y = (x - 1)^2 - 8
Read complete the square at
https://brainly.com/question/13981588
#SPJ1
1.1.3 Quiz: Induction: The Search for Rules and Patterns
Question 1 of 10
Which of the following is most likely the next step in the series?
D
OA.
OB.
О с.
O D.
O
The option that is next in the series will be option D. The Pentagon.
What is the next step in the series?The next step in the series will be option D. The first circle has a vertical line with two points while the second circle has a triangle with three points.
The third circle has a shape with four points, and given this series, we can predict that the fourth circle will have a shape with five points. Option D satisfies this condition as it has a pentagon with five sides. There are five dotted points that prove that the figure is a pentagon.
Learn more about series in math here:
https://brainly.com/question/26263191
#SPJ1
there are 12 red balls 10 yellow balls 15 green balls what is the probability of drawing two green balls without replacement
Answer: 7/74
Step-by-step explanation:
P(G)=15/37*14/36
= 1/37*7/2
= 7/74
More about probability :
https://brainly.com/question/27342429
the average weight of 19 year old women in america is 148.6 pounds with a standard deviation of 23.9 pounds. what is the minimum percentage of 19 year old women who weigh between 96.0 and 201.2 pounds? what is the maximum percentage of women who weigh more than 201.2 pounds?
the maximum percentage of women who weigh more than 201.2 pounds is 1.39%.
To find the minimum percentage of 19 year old women who weigh between 96.0 and 201.2 pounds, we need to standardize the values using the formula:
z = (x - μ) / σ
where:
x = weight value
μ = mean weight
σ = standard deviation
For x = 96.0 pounds:
z = (96.0 - 148.6) / 23.9
z = -2.21
For x = 201.2 pounds:
z = (201.2 - 148.6) / 23.9
z = 2.21
We can use a standard normal distribution table or calculator to find the area between -2.21 and 2.21. The area is approximately 0.9545 or 95.45%.
Therefore, the minimum percentage of 19 year old women who weigh between 96.0 and 201.2 pounds is 95.45%.
To find the maximum percentage of women who weigh more than 201.2 pounds, we need to standardize the value of 201.2 pounds using the same formula:
z = (x - μ) / σ
z = (201.2 - 148.6) / 23.9
z = 2.21
We can use a standard normal distribution table or calculator to find the area to the right of 2.21. The area is approximately 0.0139 or 1.39%.
To learn more about normal distribution visit:
brainly.com/question/29509087
#SPJ11
Vector u=(9,-2), v=(-1,7), and w=(-5,-8). Arrange the vector operations in ascending order of the magnitudes of their resultant vectors
The vector operations in ascending order of the magnitudes of their resultant vectors is 47 < √89 < √241
To do this, we need to perform various vector operations, such as addition and subtraction, and then calculate the magnitude of the resultant vector. The magnitude of a vector is a scalar quantity that represents the length or size of the vector and is calculated using the Pythagorean theorem.
Let's start by adding two vectors. The addition of vectors u and v can be calculated as follows:
u + v = (9,-2) + (-1,7) = (8,5)
To find the magnitude of the resultant vector, we can use the Pythagorean theorem:
|u + v| = √(8² + 5²) = √89
Next, let's subtract two vectors. The subtraction of vectors v and w can be calculated as follows:
v - w = (-1,7) - (-5,-8) = (4,15)
Again, to find the magnitude of the resultant vector, we can use the Pythagorean theorem:
|v - w| = √(4² + 15²) = √241
Finally, let's calculate the dot product of two vectors. The dot product of vectors u and w can be calculated as follows:
u · w = (9,-2) · (-5,-8) = -47
The magnitude of the dot product of two vectors is equal to the product of their magnitudes and the cosine of the angle between them. Since the angle between vectors u and w is obtuse (greater than 90 degrees), the cosine of the angle is negative. Therefore, the magnitude of the dot product is:
|u · w| = |-47| = 47
Now that we have calculated the magnitudes of the resultant vectors for each operation, we can arrange them in ascending order:
|u · w| < |u + v| < |v - w|
47 < √89 < √241
Therefore, the dot product of vectors u and w results in the smallest magnitude, followed by the addition of vectors u and v, and finally, the subtraction of vectors v and w results in the largest magnitude.
To know more about vector here
https://brainly.com/question/29740341
#SPJ4
a researcher wishes to determine whether the salaries of professional nurses employed by private hospitals are higher than those of nurses employed by government-owned hospitals. she selects a random sample of nurses from each type of hospital and calculates the means and standard deviations of their salaries. private hospital nurses had a mean salary of $26,800 (sample of 100 nurses), while the government-owned hospital nurses had a mean salary of $25,400 (sample of 800). at the 0.01 level, can she conclude that the private hospitals pay more than the government hospitals? it is known that salaries vary normally and and it is reasonable to assume there is no difference in variability of salary between the two groups.
the researcher can conclude that private hospitals pay more than government-owned hospitals based on the sample data.
To test whether private hospitals pay more than government-owned hospitals, we can use a two-sample t-test with equal variances.
The null hypothesis is that there is no difference in mean salary between the two groups:
H0: μprivate = μgovernment
The alternative hypothesis is that private hospitals pay more than government-owned hospitals:
Ha: μprivate > μgovernment
We can use a significance level of 0.01, which corresponds to a critical value of t = 2.364 (with degrees of freedom = 898).
First, we need to calculate the pooled standard deviation:
Sp = sqrt(((n private - 1)s^2private + (n government - 1)s^2government) / (n private + n government - 2))
where n private and n government are the sample sizes, s^2private and s^2government are the sample variances, and s^2pooled is the pooled variance.
Plugging in the values, we get:
Sp = sqrt(((100-1) * 186^2 + (800-1) * 176^2) / (100 + 800 - 2)) = 176.43
Next, we calculate the test statistic:
t = (x(bar)private - x(bar)government) / (Sp * sqrt(1/n private + 1/n government))
where x(bar)private and x(bar)government are the sample means.
Plugging in the values, we get:
t = (26,800 - 25,400) / (176.43 * sqrt(1/100 + 1/800)) = 3.14
Since our test statistic (3.14) is greater than the critical value (2.364), we reject the null hypothesis and conclude that private hospitals pay more than government-owned hospitals at a significance level of 0.01.
To learn more about sample visit:
brainly.com/question/13287171
#SPJ11
4. Which of the following statements is true? *
F. (x,y) → (x-7, y + 2) represents a translation 7 units down and 2 units to the right.
G. (x,y) → (-x, -y) represents a rotation 180° clockwise.
H. (x, y) (x + 3.5, y + 3.5) represents a dilation with a scale factor of 3.5.
J. (x,y) → (-x, y) represents a reflection over the x-axis.
(x, y) → (-x, -y) represents a rotation 180° clockwise.
What is transformation?Transformation is the movement of a point from its initial location to a new location. Types of transformation are reflection, rotation, translation and dilation.
Rotation is the flipping of a figure about a point. Translation is the movement of a point either up, down, left or right in the coordinate plane. Dilation is the increase or decrease in the size of a figure.
(x, y) → (x - 7, y + 2) represents a translation 7 units left and 2 units to the up.
(x, y) → (-x, -y) represents a rotation 180° clockwise.
(x, y) → (x + 3.5, y + 3.5) represents a translation 3.5 units right and 3.5 units to the up.
(x, y) → (-x, y) represents a reflection over the y-axis
Find out more on transformation at: https://brainly.com/question/4289712
#SPJ1
evaluate the expression above to find the probability that exactly 5 of the ten individuals in the sample have consumed alcohol. round your answer to three decimal places.
To evaluate the expression, we need to use the binomial distribution formula: P(X = k) = (n choose k) * p^k * (1-p)^(n-k) where:
- n is the sample size (10 individuals in this case)
- k is the number of individuals who have consumed alcohol (5 in this case)
- p is the probability of an individual consuming alcohol, which is 0.6 according to the problem
If you provide the value of p, I can help you calculate the probability.
Learn more about probability here : brainly.com/question/30034780
#SPJ11
3. Let z = x + yi where x and yare real numbers, be the cube root of a complex number w^20where w=1/2+3/2i. Find the arithmetic mean of real and imaginary parts of z ?
The arithmetic mean of the real and imaginary parts of z is approximately 0.8227 + 0.2643i.
How did we get the value?Find the value of w²⁰ and then raise it to the 10th power:
w² = (½ + 3/2i)² = ¼ + 3/2i + 9/4 = 5/2 + 3/2i
So, w²⁰ = (w²)¹⁰ = (5/2 + 3/2i)¹⁰
Now, let z equate w²⁰:
z³ = w²⁰
Substitute the expression for w²⁰:
z³ = (5/2 + 3/2i)¹⁰
Find z by taking the cube root from both sides:
z = (5/2 + 3/2i)¹⁰^(⅓)
Using 10^(⅓) = 2.1544 to calculate z:
z = (5/2 + 3/2i)^2.1544
z ≈ 1.6454 + 0.5287i
The arithmetic mean of the real and imaginary parts of z is:
(mean) = (1.6454 + 0.5287i)/2
(mean) ≈ 0.8227 + 0.2643i
Therefore, the arithmetic mean of the real and imaginary parts of z is approximately 0.8227 + 0.2643i.
learn more about arithmetic mean: https://brainly.com/question/1136789
#SPJ1
What does a negative exponent in scientific notation tell us about the number?.
A negative exponent in scientific notation tells us that the number is very small and requires a lot of zeroes before the first non-zero digit. For example, if a number is written in scientific notation as 3.0 x 10^-5, this means that the actual value of the number is 0.00003.
The negative exponent indicates that the decimal point needs to be moved to the left by five places in order to represent the value of the number.
A negative exponent in scientific notation tells us that the number is a decimal value less than 1. It indicates that the decimal point needs to be moved to the left by the number of places specified by the exponent. This represents a small number, where the magnitude decreases as the negative exponent increases.
Visit here to learn more about negative exponent brainly.com/question/29009712
#SPJ11
what is the surface area of the triangular prism
Answer:
2(1/2)(3)(4) + 2(4) + 2(5) + 2(3)
= 12 + 8 + 10 + 6 = 36 square feet
The price of a calculator is decreased by
31
%
and now is
$
189.06
.
Find the original price.
Answer:
Original price is $274
Step-by-step explanation:
Let
x = Original price of calculator ($)
Percentage decrease = [tex]\frac{Original Price - New Price}{Original Price}[/tex]× [tex]100[/tex]%
31% = [tex][\frac{x - 189.06}{x}][/tex] × [tex]100[/tex]%
[tex]\frac{31}{100}[/tex] = [tex]\frac{x - 189.06}{x}[/tex]
0.31 = [tex]\frac{x - 189.06}{x}[/tex]
Cross-multiplication is applied:
[tex](0.31)(x)[/tex] = [tex](1)(x - 189.06)[/tex]
Distributive Law is applied to expand the brackets or parentheses:
[tex]0.31x[/tex] = [tex]x - 189.06[/tex]
Like terms are brought together. At the same time, the unknown variable
x is isolated and made subject of the equation:
[tex]189.06[/tex] = [tex]x - 0.31x[/tex]
[tex]189.06[/tex] = [tex]0.69x[/tex]
[tex]x[/tex] = [tex]\frac{189.06}{0.69}[/tex]
∴ x = Original price of the calculator = $274
Serena is measuring the length of beetles for a science project 1 Beetle measures 4/5 cm and another measure 7/10 cm.what is the difference in the beatles length
The difference in the Beatles length is 1 / 10 centimeters.
We have,
The lengths of Beetles are 4/5 cm and 7/10 cm.
So, the difference in the beetles length can be calculated as
difference between the beetles length = 4 / 5 - 7 / 10
= 8 - 7 / 10
= 1/10 cm
Thus, the difference in beetles length is 1/10 cm.
learn more about difference here:
brainly.com/question/30449218
#SPJ1
When checking the conditions for regression inference, which of the following is evidence that the condition of equal standard deviation of y for each value of x has not been satisfied? (a) The residual plot has a distinctly curved shape. (b) The residual plot shows a group of randomly scattered points. (c) The histogram of residuals is skewed to the right (d) Small values of the explanatory variable are associated with small residuals, and large values of the explanatory variable are associated with large residuals. (e) The scatterplot has a distinctly curved shape.
Option A suggests that a distinctly curved pattern in the residual plot may indicate that the relationship between the explanatory and response variable is not linear, and a non-linear model may be more appropriate.
Hence option A is correct.
(a) The residual plot has a distinctly curved shape:
A curved pattern in the residual plot, resembling a parabola or a
U-shape, usually suggests that the relationship between the explanatory variable and response variable is not linear and that a non-linear model may be more appropriate.
(b) The residual plot shows a group of randomly scattered points:
A randomly scattered pattern in the residual plot indicates that the linear regression model is a good fit for the data, and that there are no obvious patterns or trends left in the residuals.
(c) The histogram of residuals is skewed to the right:
A skewed histogram of residuals suggests that the residuals are not normally distributed and may violate the assumption of normality. This can be problematic for inference and can impact the accuracy of hypothesis tests or confidence intervals.
(d) Small values of the explanatory variable are associated with small residuals and large values of the explanatory variable are associated with large residuals:
This pattern indicates that the model may be exhibiting heteroscedasticity, where the variability of the residuals changes as the explanatory variable changes. This can lead to biased and inconsistent estimates of the regression coefficients.
(e) The scatterplot has a distinctly curved shape:
Similar to option (a), a curved shape in the scatterplot indicates that a non-linear model may be more appropriate for the data.
To learn more about statistics visit:
https://brainly.com/question/30765535
#SPJ12
16) Which system involves the machinery and assembly lines used to create products?
Question 16 options:
packaging
production
supply chain
shipping
Production system involves the machinery and assembly lines used to create products.
The correct option is (b)
Mass Production:The mass production process constitutes assembly lines and automation technology to provide goods in bulk. The main features of mass production include division of labor as each production process requires a different machine, a smooth flow production with product flow clearly defined, standardization to achieve high quality, and high startup costs due to the many resources required before operations.
The manufacturing system is responsible for the production of goods and materials. It is a complex system that involves the coordination of resources, machines, and workers in order to produce finished products.
Learn more about Mass Production at:
https://brainly.com/question/30520737
#SPJ1
Arrange the following lines to make a program that determines when the number of people in a restaurant equals or exceeds 10 occupants. The program continually gets the number of people entering or leaving the restaurant. Ex: 2 means two people entered, and -3 means three people left. After each input, the program outputs the number of people in the restaurant. Once the number of people in the restaurant equals or exceeds 10, the program exits. If an InputMismatchException exception occurs, the program should get and discard a single string from input. Ex: The input "2 abc 8" should result in 10 occupants. Not all lines are used in the solution.
Here is a possible program that meets the requirements: import java.util.Scanne imporjava.util.InputMismatchException; public class RestaurantOccupancy {
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
int occupancy = 0;
The program starts by importing the Scanner and InputMismatchException classes from the java.util package.
In the main method, we declare a Scanner object named input and an integer variable named occupancy initialized to 0.
The program enters a while loop that continues as long as the occupancy is less than 10. Inside the loop, we prompt the user to enter the number of people entering or leaving the restaurant, read the input as an integer using input.nextInt(), and store it in a variable named delta.
We then add delta to the occupancy variable to update the current occupancy, and print it to the console using System.out.println(). If an InputMismatchException is thrown (i.e., the user enters a non-integer value), we catch the exception, read the next token as a string using input.next(), and print an error message to the console.
Once the occupancy reaches or exceeds 10, the while loop exits, and we print a message indicating that the occupancy limit has been reached and the program is exiting.
Here is a step-by-step explanation for a program that meets the described requirements:
1. Import the necessary libraries:
```java
import java.util.Scanner;
import java.util.InputMismatchException;
```
2. Create a class and the main method:
```java
public class RestaurantOccupancy {
public static void main(String[] args) {
```
3. Initialize the required variables and create a Scanner object for reading input:
```java
int occupants = 0;
int change;
Scanner input = new Scanner(System.in);
```
4. Create a loop that continues until the number of occupants equals or exceeds 10:
```java
while (occupants < 10) {
```
5. Use a try-catch block to handle the `InputMismatchException` exception:
```java
try {
change = input.nextInt();
occupants += change;
System.out.println("Number of people in the restaurant: " + occupants);
} catch (InputMismatchException e) {
input.next(); // Discard the invalid input
}
```
6. Close the while loop, Scanner object, and the main method:
```java
}
input.close();
}
}
```
while (occupants < 10) {
try {
Learn more about java here : brainly.com/question/29897053
#SPJ11
PLEASE HELP im literally down bad fr
a. The gaps to fill after factorizing the expression is: 2x² + 15x + 7 = (2x + 1)(x + 7).
b. The solution of the expression is: x = 1/2 or x = -7.
How to Factorize an Expression?a. Given the expression 2x² + 15x + 7, we can factorize this expression by first doing the following:
Apply the sum-product pattern:
2x² + 14x + x + 7
Create Pairs and take out common factor from them:
(2x² + 14x) + (x + 7)
2x(x + 7) +1(x + 7)
Rewrite the above in factor form:
2x² + 15x + 7 = (2x + 1)(x + 7)
b. Using the answer in part a, we would solve 2x² + 15x + 7 = 0 as shown below:
(2x + 1)(x + 7) = 0
2x + 1 = 0
2x = 1
x = 1/2
x + 7 = 0
x = -7
Therefore, the solution is: x = 1/2 or x = -7.
Learn more about factorizing an expression on:
https://brainly.com/question/29812775
#SPJ1
what is g’’(3)???????????
Answer:
-2
Step-by-step explanation:
This graph is a graph of f, that states it is equal to g'. We're graphing the first derivative, so that means g(3) is the integral of f, or the area under the curve. g'(3) is just asking for the y value that corresponds to the x value of f, because f and g' are equal.
g = ∫f
g' = f
And by extension,
g'' = f'
Because we're looking at a graph of f, finding f' is just finding the slope at f(3). Rise over run, -2 over 1, so g''(x) = f'(x) = -2
If you multiply (3.2 x 103)(1.8 x 105) you get 5.76 x 10___?? **what
power???
Answer:
8
Step-by-step explanation:
3.2 times 1.8 is 5.76. so you just add up their powers to get answer
The answer will be 5.76x 108
We are given,(3.2 x 103)(1.8 x 105)
Now, (3.2 x 1.8) (103 x 105)
5.76 x 108
Do the following values 12 20 and 23 create a right triangle
Since 23² is less than 12² + 20², we can conclude that the values 12, 20, and 23 do not create a right triangle.
To determine if the values 12, 20, and 23 create a right triangle, we can use the Pythagorean theorem, which states that for any right triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the lengths of the other two sides.
So, we can calculate:
12² + 20² = 144 + 400 = 544
23² = 529
To know more about right triangle here
https://brainly.com/question/6322314
#SPJ4
In ΔOPQ, o = 850 cm, q = 800 cm and ∠Q=25°. Find all possible values of ∠O, to the nearest degree
The measure of angle O is 27 degrees
How to determine the valueTo determine the value, we need to know the law of sines
The law of sines is represented as;
sin A/a = sin B/b = sin C/c
Such that the parameters are expressed as;
A and B and C are the angles in the trianglea and b and c are the sides of the triangleFrom the information given, we have that;
o = 850 cm, q = 800 cm and ∠Q=25°.
Substitute the values, we have;
sin O/850 = sin 25/800
cross multiply the values, we get;
sin O = sin 25 (850)/800
find the value and multiply
sin O = 359. 22/800s
sin O = 0.4490
find the inverse
O = 26. 7 degrees
Learn about law of sines at: https://brainly.com/question/27174058
#SPJ4
Answer the question please
Answer:
Step-by-step explanation:
This is S(oh)C(ah)T(oa)
Since X is on the adjacent leg of the triangle, you want to use COSINE
The Cos(18)=x/25
Multiply cos(18) by 25, and you get 23.7764129074.
Answer:
COS(18)=x/25
COS(19)*25= 23.776
(d) what is the probability that a vehicle will weigh more than 4,000 pounds? (round your answer to 2 decimal places.)
The probability that a vehicle will weigh more than 4,000 pounds is 0.20 or 20%.
(a) The mean weight of a randomly chosen vehicle can be calculated as the average of the minimum and maximum weights:
Mean = (2500 + 4500)/(2)
= 3500$ pounds
Therefore, the mean weight of a randomly chosen vehicle is 3500 pounds.
(b) The standard deviation of a uniformly distributed random variable is given by:
SD = (b-a)/√12
where a is the minimum value and b is the maximum value of the distribution. Substituting the given values, we get:
SD = 4500- 2500/ √12
= 433.01$ pounds
Therefore, the standard deviation of a randomly chosen vehicle is approximately 433.01 pounds.
(c) To find the probability that a vehicle will weigh less than 3,000 pounds, we need to calculate the proportion of the total area under the probability density function (PDF) that lies to the left of 3,000 pounds. Since the distribution is uniform, the PDF is a horizontal line with a height of (b-a) over the interval from a to b. Therefore, the probability can be calculated as:
P(X < 3000) = (3000-2500)(4500-2500)
= 1/4
= 0.25$
Therefore, the probability that a vehicle will weigh less than 3,000 pounds is 0.25 or 25%.
(d) To find the probability that a vehicle will weigh more than 4,000 pounds, we need to calculate the proportion of the total area under the PDF that lies to the right of 4,000 pounds. Again, since the distribution is uniform, the PDF is a horizontal line with a height of 1/(b-a) over the interval from a to b. Therefore, the probability can be calculated as:
P(X > 4000) = 1 - P(X >= 4000)
= 1 / (4000-2500)(4500-2500)
= 1/5
= 0.20$
Therefore, the probability that a vehicle will weigh more than 4,000 pounds is 0.20 or 20%.
To know more about probability check below link:
https://brainly.com/question/24756209
#SPJ4
Complete question:
Assume the weight of a randomly chosen American passenger car is a uniformly distributed random variable ranging from 2,500 pounds to 4,500 pounds.
(a) What is the mean weight of a randomly chosen vehicle?
(b) What is the standard deviation of a randomly chosen vehicle? (Round your answer to 4 decimal places.)
(c) What is the probability that a vehicle will weigh less than 3,000 pounds? (Round your answer to 2 decimal places.)
(d) What is the probability that a vehicle will weigh more than 4,000 pounds? (Round your answer to 2 decimal places.)
A computer is used to generate passwords made up of numbers 0 through 9 and uppercase letters. The computer generates 500 passwords one character at a time.
A uniform probability model is used to predict the first character in the password.
What is the prediction for the number of passwords in which the first character is a number?
Round your answer to the nearest whole number.
69 passwords
139 passwords
192 passwords
292 passwords
The prediction for the number of passwords in which the first character is a number is given as follows:
139 passwords.
How to calculate a probability?A probability is calculated as the division of the desired number of outcomes by the total number of outcomes in the context of a problem/experiment.
The passwords have the first character chosen as follows:
Letter: 26 outcomes.Number: 10 outcomes.Hence the probability of a number is given as follows:
p = 10/(10 + 26)
p = 10/36
p = 5/18.
Out of 500 passwords, the expected number is then given as follows:
E(X) = 500 x 5/18
E(X) = 139 passwords.
More can be learned about probability at https://brainly.com/question/24756209
#SPJ1
calculate the standard deviation for the following sample data: 10, 6, 14, 8, 10, 12. 1.12 2.58 2.83 8 more than 10
The standard deviation for the given sample data is 2.83.
To calculate the standard deviation, we first need to calculate the mean of the sample data:
Mean = (10 + 6 + 14 + 8 + 10 + 12) / 6 = 10Next, we calculate the deviation of each data point from the mean:
(10 - 10), (6 - 10), (14 - 10), (8 - 10), (10 - 10), (12 - 10)0, -4, 4, -2, 0, 2Then, we square each deviation:
0, 16, 16, 4, 0, 4Next, we calculate the sum of squared deviations:
0 + 16 + 16 + 4 + 0 + 4 = 40To calculate the variance, we divide the sum of squared deviations by the sample size minus one:
Variance = 40 / (6-1) = 8Finally, we calculate the standard deviation by taking the square root of the variance:
Standard Deviation = √(8) = 2.83Therefore, the standard deviation for the given sample data is 2.83. This tells us how spread out the data points are from the mean, with most data points being within 2.83 units of the mean.
Learn more about standard deviation:
https://brainly.com/question/24298037
#SPJ4
You have eight balls all of the same size. 7 of them weigh the same, and one of them weighs slightly more. How can you find the ball that is heavier by using a balance and only two weighings?
The heavy marble using a two-pan balance, the minimum number of weighings required is two.
Here's how you can do it:
Divide the eight marbles into two groups of four.
Weigh the two groups against each other.
If the two groups weigh the same, the heavy marble is one of the remaining four marbles. Proceed to step 3.
If one group weighs more, the heavy marble is in that group. Proceed to step 3.
Divide the four marbles from the heavier group into two groups of two.
Weigh the two groups of two against each other.
If the two groups weigh the same, the heavy marble is one of the remaining two marbles. Proceed to step 5.
If one group weighs more, the heavy marble is in that group. Proceed to step 5.
Weigh the remaining two marbles against each other.
The heavier marble is the heavy marble.
To know more about heavy marble visit:
https://brainly.com/question/29334705
#SPJ4
Is it true that Every square matrix is a product of elementary matrices.
It is true that every invertible square matrix can be written as a product of elementary matrices. because, it depends on whether you are talking about invertible square matrices or all square matrices.
An elementary matrix is a matrix that can be obtained from the identity matrix by performing a single elementary row operation (such as swapping two rows, multiplying a row by a scalar, or adding a multiple of one row to another).
Moreover, any matrix that can be expressed as a product of elementary matrices is invertible.
However, not every square matrix is invertible, and so not every square matrix can be written as a product of elementary matrices. For example, the zero matrix cannot be written as a product of elementary matrices since it is not invertible.
So, it depends on whether you are talking about invertible square matrices or all square matrices.
for such more question on square matrix
https://brainly.com/question/3617398
#SPJ11
