Answer:
The correct answer is (c) ClO2-.
When KOH is added to the solution, it will react with the HCl to form KCl and H2O. This will decrease the concentration of H+ in the solution, which will cause the pH to increase.
The KOH will also react with the HClO2 to form KClO2 and H2O. However, the HClO2 is a weak acid, so the reaction will not go to completion. This means that some of the HClO2 will remain in solution.
As the pH of the solution increases, the equilibrium of the following reaction will shift to the right:
HClO2 + H2O ⇌ ClO2- + H3O+
This means that the concentration of ClO2- will increase as the pH of the solution increases.
Therefore, the amount of ClO2- increases as the KOH(aq) is added.
Explanation:
A 1M solution of NaCl (aq) is represented in the particle diagram. Which of the following diagrams best represents a 1M solution of CaCl2 (aq), assuming that the volumes of the solutions represented are equal?
The image that would show one mole of the calcium chloride is option A
What is an ionic solution?A solution called an ionic solution has ions as the solute particles. Ions are atoms or molecules that have either received or lost one or more electrons, leaving them with a net electrical charge.
The solute ions in an ionic solution are often salts, acids, or bases that have dissolved in a liquid, such water.
We know that in calcium chloride, there is one calcium ion and then two chloride ions making a total of three ions as we can see in the image in option A.
Learn more about ionic solution:https://brainly.com/question/16414422
#SPJ1
assign oxidation numbers to each of the atoms br and o in bro−3.
The oxidation number of bromine in bro−3 is +5, while the oxidation number of oxygen is -2 for each of the three oxygen atoms.
To assign oxidation numbers to each atom in bro−3, we first need to understand the rules for assigning oxidation numbers. The oxidation number of oxygen in most compounds is -2, and the sum of oxidation numbers of all the atoms in a compound must be equal to the overall charge of the compound.
In the case of bro−3, we know that the overall charge of the ion is -1, so the sum of the oxidation numbers of all the atoms must be equal to -1.
Since there are three oxygen atoms in bro−3, their combined oxidation number is -6. Therefore, the oxidation number of bromine must be +5 to balance out the negative charge and give a net oxidation number of -1.
1. Oxygen usually has an oxidation number of -2, except in peroxides (like H₂O₂) where it is -1. In BrO₃⁻, oxygen is not in a peroxide, so its oxidation number is -2.
2. There are three oxygen atoms in BrO₃⁻, each with an oxidation number of -2. The total contribution from the oxygen atoms is 3(-2) = -6.
3. The overall charge of the BrO₃⁻ ion is -1. To balance this charge, the oxidation number of Br must be +5 (since +5 - 6 = -1).
So, the oxidation numbers are +5 for Br and -2 for each O in the BrO₃⁻ ion.
To learn more about Oxidation, click here:
https://brainly.com/question/13182308
#SPJ11
if the nuclide has a half-life of 8.0 days , what mass of the nuclide remains in the patient at 8:00 p.m. the next day? (assume no excretion of the nuclide from the body.)
Half of the original mass of the nuclide will remain after 8 days. Therefore, after one day (24 hours), 3/4 (or 75%) of the original mass will remain.
The half-life of a nuclide is the time it takes for half of the original amount to decay. In this case, if the half-life is 8 days, after 8 days, half of the original mass will remain. Since we are looking at the mass remaining after 1 day (24 hours), we need to determine what fraction of the original mass would remain after half of the half-life (4 days or 96 hours). To do this, we can use the formula:
fraction remaining = (1/2)^(time elapsed / half-life)
Plugging in the values, we get:
fraction remaining = (1/2)^(96 / 192)
fraction remaining = (1/2)^0.5
fraction remaining = 0.707
This means that after 1 day, 70.7% of the original mass will remain. To calculate the actual mass, we need to multiply this fraction by the original mass. Therefore, if we assume that the original mass was 100 grams, then 75 grams (or 75% of 100 grams) will remain in the patient's body at 8:00 p.m. the next day.
Learn more about half-life here:
https://brainly.com/question/24710827
#SPJ11
Which of the following has potential energy?
OA. A car parked in the driveway
OB. A bird flying
OC. A person sitting on the ground
OD. A kite resting on the ground
OA. A car parked in the driveway has potential energy.
Potential energy is the energy possessed by an object due to its position or condition. In the case of a parked car, it has potential energy because it possesses the ability to do work or change its state. The car is elevated above the ground, which gives it gravitational potential energy. If released or allowed to roll down a hill, for example, this potential energy could be converted into kinetic energy as the car starts moving.
OB. A bird flying.
When a bird is flying, it possesses kinetic energy due to its movement. However, potential energy is not associated with the bird in this scenario.
OC. A person sitting on the ground.
A person sitting on the ground does not possess potential energy in the context of this question. They have gravitational potential energy when they are elevated or in a position where they can fall, but sitting on the ground eliminates this potential energy.
OD. A kite resting on the ground.
Similar to a person sitting on the ground, a kite resting on the ground does not possess potential energy in this context. It may have potential energy when it is elevated in the air, but when it is resting on the ground, the potential energy is not present.
In summary, the only option that has potential energy is OA, a car parked in the driveway.
for more such questions on energy
https://brainly.com/question/29339318
#SPJ11
the final step in lewin's three-step description of the change process is ________.
The final step in Lewin's three-step description of the change process is called "refreezing." Refreezing is the stage where the changes that have been implemented are reinforced, stabilized, and integrated into the organization's culture and practices.
It involves establishing new norms, values, and behaviors that support the desired change and prevent the organization from reverting to its previous state. In the refreezing stage, the focus is on solidifying the changes and making them the new "status quo." This step is essential to ensure that the changes become ingrained and sustainable within the organization. It involves reinforcing the new behaviors through ongoing training, communication, and support mechanisms. Additionally, organizational systems, structures, and processes may need to be adjusted to align with the changes and support their continuation. Refreezing helps to prevent individuals from relapsing into old habits and encourages the acceptance and internalization of the new ways of operating. It enables the organization to consolidate the change and create a sense of stability, which is crucial for the long-term success of the transformation. By reinforcing the desired behaviors and ensuring they become the new norm, refreezing helps organizations adapt and thrive in an ever-changing environment.
Learn more about lewin's three-step here: brainly.com/question/31760296
#SPJ11
how many grams of sulfur are involved in this reaction if 95 grams of iron are needed to react with sulfur?
To answer your question, we need to know the balanced chemical equation for the reaction between iron and sulfur. The equation is:
Fe + S -> FeS
This means that 1 mole of iron reacts with 1 mole of sulfur to form 1 mole of iron sulfide. The molar mass of iron is 55.845 g/mol, and the molar mass of sulfur is 32.06 g/mol.
To find out how many grams of sulfur are involved in the reaction, we can use the following calculation:
95 g Fe x (1 mol Fe/55.845 g) x (1 mol S/1 mol Fe) x (32.06 g S/1 mol S) = 54.4 g S
Therefore, 54.4 grams of sulfur are involved in the reaction if 95 grams of iron are needed to react with sulfur.
To know more about mole visit :-
https://brainly.com/question/29367909
#SPJ11
an aqueous methanol, ch3oh, solution has a mole fraction of 0.548 of methanol. what is the mass percentage of water in this solution?
The mass percentage of water in the solution is 24.8%. To find the mass percentage of water in the solution, we need to first calculate the mole fraction of water in the solution. The total mole fraction of the solution is 1, so the mole fraction of water can be found by subtracting the mole fraction of methanol from 1.
Mole fraction of water = 1 - 0.548 = 0.452
Now, we can use the mole fraction of water to calculate the mass percentage of water in the solution. We know that the total mass of the solution is made up of the mass of water and the mass of methanol. Therefore,
Mass fraction of water = (Mole fraction of water * Molar mass of water) / (Mole fraction of water * Molar mass of water + Mole fraction of methanol * Molar mass of methanol)
Plugging in the values, we get
Mass fraction of water = (0.452 * 18) / (0.452 * 18 + 0.548 * 32) = 0.248 or 24.8%
Therefore, the mass percentage of water in the solution is 24.8%.
To know about mass:
https://brainly.com/question/24611140
#SPJ11
a buffer is prepared by mixing 50.3 ml of 0.196 m naoh with 141.2 ml of 0.231 m acetic acid. what is the ph of this buffer? (the pka for acetic acid is 4.75.)
The pH of the buffer prepared by mixing 50.3 mL of 0.196 M NaOH with 141.2 mL of 0.231 M acetic acid is 4.74.
To calculate the pH of the buffer, we'll use the Henderson-Hasselbalch equation: pH = pKa + log([A⁻ ]/[HA]). First, determine the moles of NaOH and acetic acid (CH₃COOH):
Moles NaOH = (0.196 mol/L) x (0.0503 L) = 0.009858 mol
Moles CH₃COOH = (0.231 mol/L) x (0.1412 L) = 0.0325972 mol
Next, find the moles of acetic acid that react with NaOH to form the conjugate base (CH₃COO⁻ ):
Moles CH₃COO⁻ = 0.009858 mol
Moles CH₃COOH (after reaction) = 0.0325972 - 0.009858 = 0.0227392 mol
Now, calculate the concentrations of CH₃COOH and CH₃COO⁻ :
[CH₃COOH] = 0.0227392 mol / (0.0503 L + 0.1412 L) = 0.12086 M
[CH₃COO⁻] = 0.009858 mol / (0.0503 L + 0.1412 L) = 0.05219 M
Finally, apply the Henderson-Hasselbalch equation:
pH = 4.75 + log(0.05219 / 0.12086) = 4.74
Learn more about conjugate base here:
https://brainly.com/question/30086613
#SPJ11
a 0.150 mol sample of an ideal gas occupies 3.50l. what is the volume of 0.250 moles of this gas at the same temperature and pressure?
The molar volume of 0.250 moles of this gas at the same temperature and pressure is 5.83 L.
1. To solve this problem, we'll use the formula for the relationship between moles, volume, and molar volume, which is: [tex]\frac{n1}{V1}=\frac{n2}{V2}[/tex].
2. We are given the initial moles (n1) and volume (V1) of the gas as 0.150 mol and 3.50 L, respectively. We are also given the new amount of moles (n2) as 0.250 mol. Our goal is to find the new volume (V2).
3. Plug in the given values into the equation:
[tex]\frac{(0.150 mol) }{(3.50 L)} =\frac{ (0.250 mol)}{V2}[/tex]
4. Solve for [tex]V2 = \frac{(0.250 mol) * (3.50 L) }{(0.150 mol)}[/tex]
5. Calculate V2: V2 = 5.83 L.
The volume of 0.250 moles of this ideal gas at the same temperature and pressure is 5.83 L.
For more information on molar volume kindly visit to
https://brainly.com/question/29884686
#SPJ11
49. the half life of c0-60 is 5.2 years. how many mg of a 1000 mg sample will remain after 9.50 years? g
If the half life of C0-60 is 5.2 years; then approximately 273.38 mg of the 1000 mg sample will remain after 9.50 years.
The half-life of C0-60 is 5.2 years, meaning that after 5.2 years, half of the original sample will have decayed. After another 5.2 years, half of what remained will have decayed, and so on.
To calculate how much of the sample will remain after 9.50 years, we need to divide 9.50 by 5.2 to find out how many half-lives have passed.
This gives us a quotient of 1.83. We then raise 0.5 to the power of 1.83, which gives us a result of 0.274.
Multiplying this by the original sample size of 1000 mg gives us the answer: approximately 273.38 mg of the 1000 mg sample will remain after 9.50 years.
Learn more about half life here:
https://brainly.com/question/24710827
#SPJ11
Calculate the ratio of the effusion rates of N2 and N2O.
A)
0.637
B)
1.57
C)
1.25
D)
0.798
E)
1.61
Approximately 1.25 is the ratio of the effusion rates of N[tex]^{2}[/tex] and N[tex]^{2}[/tex]O. So, the answer is C) 1.25.
The effusion rate of a gas is inversely proportional to the square root of its molar mass. The molar masses of N[tex]^{2}[/tex] and N[tex]^{2}[/tex]O are 28 g/mol and 44 g/mol, respectively. To calculate the ratio of the effusion rates of N[tex]^{2}[/tex] and N[tex]^{2}[/tex]O, we can use Graham's Law of Effusion. The formula is:
Rate1 / Rate2 = √(Molar Mass2 / Molar Mass1)
For N[tex]^{2}[/tex] (Nitrogen), the molar mass is 28 g/mol, and for N[tex]^{2}[/tex]O (Nitrous oxide), the molar mass is 44 g/mol. Plugging these values into the formula:
Rate(N[tex]^{2}[/tex]) / Rate(N[tex]^{2}[/tex]O) = √(44 / 28) = √(1.57)
Thus, the ratio of the effusion rates of N[tex]^{2}[/tex] and N[tex]^{2}[/tex]O is approximately 1.25. So the correct answer is (C) 1.25.
More on effusion: https://brainly.com/question/9611592
#SPJ11
the compound which would not yield 2-propanone when treated with h2o/h3o :
Answer:
The compound which would not yield 2-propanone when treated with H2O/H3O is 2-methylpropane.
2-propanone is a ketone, which means that it has a carbonyl group (C=O) attached to a carbon atom that is also attached to two hydrogen atoms. 2-methylpropane, on the other hand, is an alkane, which means that it has only single bonds between its carbon atoms. When 2-propanone is treated with H2O/H3O, the carbonyl group is hydrolyzed to form 2-propanol. However, when 2-methylpropane is treated with H2O/H3O, no reaction occurs because there is no carbonyl group to be hydrolyzed.
Here are the chemical equations for the reactions of 2-propanone and 2-methylpropane with H2O/H3O:
2-propanone
CH3COCH3 + H2O/H3O -> CH3CH2CH2OH
2-methylpropane
CH3CH(CH3)2 + H2O/H3O -> no reaction
Explanation:
Which of the following reactions would you predict to have the largest orientation factor?
H(g) + F(g) â HF(g)
NH3(g) + BCl3(g) â H3N-BCl3(g)
NOCl(g) + NOCl(g) â 2NO(g) + Cl2(g)
Br2(g) + H2C=CH2(g) â H2BrC-CBrH2(g)
All of these reactions should have nearly identical orientation factors.
The reaction with the largest orientation factor is NH3(g) + BCl3(g) → H3N-BCl3(g).
The orientation factor in a reaction is a measure of the likelihood that two reactant molecules will collide in the correct orientation necessary for a reaction to occur. The larger the orientation factor, the more likely it is for the reaction to occur. In order to determine which of the reactions listed would have the largest orientation factor, we need to consider the shape and orientation of the molecules involved.
In the first reaction, H(g) and F(g) are both linear and can approach each other in any orientation. Similarly, in the third reaction, NOCl(g) and NOCl(g) are also linear and can approach each other in any orientation. In the fourth reaction, Br2(g) is linear, but H2C=CH2(g) is planar, which means there are only certain orientations in which they can approach each other for a reaction to occur.
The second reaction involves NH3(g) and BCl3(g), both of which are trigonal pyramidal in shape. This means that there is only one orientation in which the molecules can approach each other for a reaction to occur - the nitrogen atom of NH3(g) must approach the boron atom of BCl3(g) directly. This restricted orientation makes it more likely for a successful collision to occur, resulting in a larger orientation factor compared to the other reactions.
Therefore, the reaction with the largest orientation factor is NH3(g) + BCl3(g) → H3N-BCl3(g).
To know more about reactions visit:
https://brainly.com/question/32026939
#SPJ11
For a gas, which two variables are directly proportional to each other (if all other conditions remain constant)?
1. T and n
2. V and n
3. V and T
A)
1 only
B)
2 only
C)
3 only
D)
1 and 2 only
E)
2 and 3 only
For a gas C) 3 only two variables are directly proportional to each other.
According to the ideal gas law, PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature. Keeping all other conditions constant, the volume (V) and temperature (T) of an ideal gas are directly proportional to each other. This means that as the temperature increases, the volume of the gas will also increase proportionally. This relationship is known as Charles's Law. On the other hand, the number of moles (n) of gas in a container does not affect the volume-temperature relationship. Therefore, options 1 and 2 are incorrect, while option 3 is the correct answer. Answering in more than 100 words, understanding the relationship between variables in an ideal gas is important in many fields such as chemistry, physics, and engineering.
To know more about Ideal gas visit:
https://brainly.com/question/30236490
#SPJ11
you have a heat exchanger and air is passing through it. you definitely know there is no entropy generation as the air passes. however, you find that the entropy of the air coming out the exit has decreased. what has happened?
The decrease in entropy of the air passing through a heat exchanger while there is no entropy generation can be explained by the second law of thermodynamics, which states that in a closed system, the entropy can never decrease.
However, the system we are considering is not closed. The heat exchanger is connected to an external environment where heat is exchanged between the air passing through and the surroundings. As a result, the decrease in entropy of the air leaving the heat exchanger implies that the heat transfer from the air to the surroundings was irreversible, which resulted in an increase in the entropy of the surroundings. This principle is known as the entropy balance, which states that the total entropy of a closed system cannot decrease, but it can increase due to irreversible processes, such as heat transfer. Therefore, the decrease in entropy of the air passing through the heat exchanger is compensated by an increase in the entropy of the surroundings due to the irreversible heat transfer process.
The decrease in entropy at the exit suggests that the air has lost heat to the surroundings during its passage. Since entropy is related to heat transfer and temperature, this heat loss causes the air's entropy to decrease. In a reversible process, the system and its surroundings experience an equal and opposite change in entropy. Therefore, the entropy decrease in the air is compensated by an entropy increase in the surroundings. Overall, the total entropy remains constant, maintaining the principle of entropy balance.
To know more about thermodynamics visit:-
https://brainly.com/question/1368306
#SPJ11
The main component of s a product that is formed through the following series of intermediate chemical reactions.mc003-What is the overall chemical equation for smog after the above intermediate reactions are combined?Upper N subscript 2 (g) plus 3 upper O subscript 2 (g) plus 2 upper O subscript 3 (g) plus 2 upper O (g) right arrow 8 upper N upper O (g) plus 4 upper N upper 0 subscript 2 (g) plus 2 upper O subscript 3 (g).Upper N subscript 2 (g) plus 3 upper O subscript 2 (g) plus upper O subscript 3 (g) plus upper O (g) right arrow 9 upper N upper O (g) plus 3 upper N upper 0 subscript 2 (g) plus 2 upper O subscript 3 (g).Upper N subscript 2 (g) plus 3 upper O subscript 2 (g) right arrow 3 upper N upper O subscript 2 (g).Upper N subscript 2 (g) plus 2 upper O subscript 2 (g) right arrow 2 upper N upper O subscript 2 (g).
Explanation:
The given intermediate chemical reactions do not lead to a single overall chemical equation for smog. Instead, they represent a combination of various reactions that contribute to the formation of different components of smog, such as nitrogen oxides (NOx) and ozone (O3).
The first reaction given is:
N2 + 3O2 + 2O3 + 2O → 8NO + 4NO2 + 2O3
This reaction represents the formation of nitrogen oxides and ozone from the reaction of nitrogen and oxygen with ozone and oxygen radicals. Nitrogen oxides and ozone are major components of smog.
The second reaction given is:
N2 + 3O2 + O3 + O → 9NO + 3NO2 + 2O3
This reaction also represents the formation of nitrogen oxides and ozone, but with a different stoichiometry.
The third reaction given is:
N2 + 3O2 → 2NO + O2
This reaction represents the direct formation of nitrogen oxides from the reaction of nitrogen and oxygen.
The fourth reaction given is:
N2 + 2O2 → 2NO2
This reaction represents the direct formation of nitrogen dioxide from the reaction of nitrogen and oxygen.
Overall, the formation of smog is a complex process that involves the interaction of various chemical reactions and environmental factors. Therefore, there is no single overall chemical equation that describes the formation of smog.
What would you expect for the magnitude and direction of the bond dipoles in this series? a) BâH>CâH>NâH b) NâH>CâH>BâH c) NâH>BâH>CâH d) CâH>BâH>NâH
The electronegativity of an atom determines how strongly it attracts electrons in a bond. When atoms with different electronegativities are bonded together, the shared electrons are not equally shared, leading to the formation of a bond dipole.
The direction of the bond dipole is from the less electronegative atom towards the more electronegative atom.
In this series, the electronegativity of the central atom increases from B to C to N, while the electronegativity of the bonded hydrogen atom remains relatively constant. Therefore, the bond dipoles are expected to increase in magnitude from a) BâH > CâH > NâH, since the difference in electronegativity between the central atom and the hydrogen atom becomes larger as we move from N to C to B. The direction of the bond dipoles is from the hydrogen atom towards the central atom.
Therefore, the correct answer is a) BâH > CâH > NâH.
Learn more about bond here:
https://brainly.com/question/31994049
#SPJ11
Which state of matter is characterized by having molecules close together, but moving randomly? A) gas B) liquid C) solid D) all of these
Option (C) is correct, The state of matter that is characterized by having molecules close together, but moving randomly is the solid state.
In a solid, the molecules are tightly packed together in a fixed arrangement, which gives the solid its definite shape and volume. However, the molecules in a solid are not completely still; they vibrate in place due to thermal energy. This random movement is what distinguishes solids from liquids, where the molecules are close together but move more freely, and gases, where the molecules are widely spaced and move rapidly. Overall, the characteristics of a solid make it an important state of matter for various applications, such as construction materials, electronics, and medicine.
To know more about molecules visit :
https://brainly.com/question/16900319
#SPJ11
what is the molarity of a kcl solution made by diluting 75.0 ml of a 0.200 m solution to a final volume of 100.ml?
The molarity of the final KCl solution is 0.150 M.
We can use the dilution formula:
M1V1 = M2V2
where M1 is the initial molarity, V1 is the initial volume, M2 is the final molarity, and V2 is the final volume.
In this case, we are diluting 75.0 mL of a 0.200 M solution to a final volume of 100 mL, so:
M1 = 0.200 M
V1 = 75.0 mL = 0.075 L
M2 = ?
V2 = 100 mL = 0.100 L
Using the dilution formula:
M1V1 = M2V2
0.200 M x 0.075 L = M2 x 0.100 L
M2 = (0.200 M x 0.075 L) / 0.100 L
M2 = 0.150 M
Therefore, the molarity of the final KCl solution is 0.150 M.
Learn more about KCl solution here:
https://brainly.com/question/31615421
#SPJ11
which of the following is an example of positive regulation of gene expression in E. coli?
a. the role of the repressor of the trp operon
b. the role of the corepressor of the trp operon
c. the role of cyclic AMP in regulation of the lac operon
d. the role of the repressor of the lac operon
e. the effect of glucose on the lac operon
c. the role of cyclic AMP in regulation of the lac operon is an example of positive regulation of gene expression in E. coli.
The lac operon is a set of genes involved in lactose metabolism in E. coli. When lactose is present, it binds to the lac repressor protein and inactivates it. This allows RNA polymerase to transcribe the genes of the lac operon. However, in the absence of glucose, cAMP levels increase, which leads to the activation of the catabolite activator protein (CAP). CAP binds to a specific site upstream of the lac promoter, which enhances the binding of RNA polymerase to the promoter and increases transcription of the lac genes.
This is an example of positive regulation because the presence of cAMP and CAP enhances the expression of the lac operon.
Learn more about cyclic here:
https://brainly.com/question/30079055
#SPJ11
why can't grignard/organolithium compounds cannot be formed in the presence of o-h, n-h, s-h bonds or terminal alkyne
Grignard reagents and organolithium compounds are powerful nucleophiles that can react with a wide range of electrophiles, including carbonyl compounds and alkyl halides.
However, they are highly reactive and can react with a variety of functional groups, including O-H, N-H, and S-H bonds, as well as terminal alkynes.
The reason why Grignard/organolithium compounds cannot be formed in the presence of O-H, N-H, and S-H bonds is due to their acidic nature. The presence of an acidic proton in the same reaction vessel as the Grignard or organolithium reagent can lead to the protonation of the reagent, which would result in the loss of its nucleophilicity. This is because the acidic proton can react with the negatively charged carbon atom of the Grignard or organolithium reagent, leading to the formation of a less reactive alkane and a neutral magnesium or lithium compound.
In the case of terminal alkynes, the problem is different. Terminal alkynes are highly acidic and can easily deprotonate Grignard or organolithium reagents, resulting in the formation of a new carbon-carbon bond between the two compounds. This can lead to the formation of unwanted byproducts and decrease the yield of the desired product.
Therefore, to avoid these issues, it is important to use anhydrous conditions and to exclude any acidic protons or terminal alkynes from the reaction vessel when forming Grignard or organolithium compounds.
Learn more about alkyl here:
https://brainly.com/question/31973951
#SPJ11
Balance the following reaction, which occurs in basic solution.
MnO4-(aq) + Br-(aq) --> MnO2(s) + BrO3-(aq)
Please show your work.
The balanced equation in basic solution will be; MnO₄⁻(aq) + Br⁻(aq) + 2H₂O(l) → MnO₂(s) + BrO₃⁻(aq) + 6OH⁻(aq).
In basic solution, we need to balance the equation in two steps;
Step 1; Balance the equation in acidic solution.
MnO₄⁻(aq) + Br⁻-(aq) → MnO₂(s) +BrO₃⁻-(aq)
Balance the O by adding H₂O to the appropriate side;
MnO₄⁻(aq) + Br⁻(aq) → MnO₂(s) + BrO₃⁻(aq) + H₂O(l)
Balance the H by adding H⁺ to the appropriate side;
MnO₄⁻(aq) + Br⁻(aq) + 4H⁺(aq) → MnO₂(s) + BrO₃⁻(aq) + 2H₂O(l)
Balance the charges by adding electrons to the appropriate side:
MnO₄⁻(aq) + Br⁻(aq) + 4H⁺(aq) → MnO₂(s) + BrO₃⁻(aq) + 2H₂O(l) + 3e⁻
Step 2; Convert the equation to basic solution by adding OH⁻ to the appropriate side equal to the number of H⁺;
MnO₄⁻(aq) + Br⁻(aq) + 4H₂O(l) → MnO₂(s) + BrO₃⁻(aq) + 2H₂O(l) + 3e⁻
Add 4OH⁻ to the left side;
MnO₄⁻(aq) + Br⁻(aq) + 4H₂O(l) + 4OH⁻(aq) → MnO₂(s) + BrO₃⁻(aq) + 2H₂O(l) + 3e⁻ + 4OH⁻(aq)
Simplify;
MnO₄⁻(aq) + Br⁻(aq) + 2H₂O(l) + 4OH⁻(aq) → MnO₂(s) + BrO₃⁻(aq) + 6OH⁻(aq)
Finally, we cancel out the extra OH⁻ on both sides of the equation;
MnO₄⁻(aq) + Br⁻(aq) + 2H₂O(l) → MnO₂(s) + BrO₃⁻(aq) + 6OH⁻(aq)
Therefore, the balanced equation in basic solution is;
MnO₄⁻(aq) +Br⁻(aq) + 2H₂O(l) → MnO₂(s) + BrO₃⁻(aq) + 6OH⁻(aq)
To know more about basic solution here
https://brainly.com/question/3449428
#SPJ4
The Br ion has an electron structure that is identical to which inert gas? a Argon b Xenon c Neon d Krypton e Helium
The Br ion, which is the ion form of bromine, has an electron structure that is identical to the inert gas argon.
In its neutral state, bromine has the electron configuration [Ar] 3d10 4s2 4p5, with 35 electrons distributed among its various energy levels. When bromine loses one electron to form the Br ion, it attains a stable electron configuration similar to that of the noble gas argon. Argon's electron configuration is [Ne] 3s2 3p6, with a total of 18 electrons. By losing one electron, the bromine ion achieves a configuration of [Ar], which is identical to that of argon. This similarity in electron configuration allows the Br ion to attain stability, similar to the inert noble gas argon.
Learn more about noble gas here: brainly.com/question/32007931
#SPJ11
under what circumstances might it be easier to express solution concentrations in terms of molarity? in terms of parts per million instead?
Molarity is a common way to express solution concentrations and is defined as the number of moles of solute per liter of solution.
It is often easier to use molarity when working with solutions that have a well-defined chemical composition, as it allows for precise measurements of the concentration of the solute. Additionally, molarity can be used to calculate the amount of solute needed to prepare a solution of a certain concentration, which can be useful in laboratory settings.
However, when working with solutions that have complex or unknown chemical compositions, it may be more appropriate to express concentration in terms of parts per million (ppm). This is because ppm expresses the amount of solute per unit volume of solution, rather than per liter of solution. As such, ppm can be useful when dealing with solutions that have variable or unknown volumes, or when trying to express the concentration of a substance in a more understandable way for non-scientific audiences.
In summary, the choice of whether to use molarity or ppm to express solution concentrations depends on the specific circumstances of the solution and the needs of the user. Molarity is typically more precise and useful for solutions with known chemical compositions, while ppm is more flexible and may be easier to understand for non-experts or when dealing with complex or variable solutions.
To know more about Molarity visit:
https://brainly.com/question/31545539
#SPJ11
What are the safety hazards associated with glacial acetic acid? 1. Carcinogen 2. Health Hazard 3. Environmental hazard 4. Flammable 5. Corrosive
Glacial acetic acid is a hazardous chemical that is carcinogenic, flammable, corrosive, and poses health and environmental hazards.
Glacial acetic acid is a clear, colorless, corrosive liquid that can cause severe burns and eye damage upon contact. It is also highly flammable and can pose a fire hazard. Additionally, glacial acetic acid is a known carcinogen, meaning it can cause cancer, and it is harmful if ingested or inhaled. When released into the environment, it can contaminate water and soil, potentially causing harm to aquatic life and plants.
It is important to handle glacial acetic acid with extreme care, using appropriate protective equipment and following proper disposal protocols. In case of accidental exposure, seek immediate medical attention. Proper training and awareness of the risks associated with this chemical can help prevent accidents and ensure a safe workplace.
Learn more about carcinogen here:
https://brainly.com/question/29422741
#SPJ11
What does the slope of each line tell you about the warming of the can? - If there was a graph.
(Use science terminology)
(We did an experiment seeing whether a black can or a silver can would absorb more radiation, the black can did)
which functional group(s) would you confidently predict in a pure sample of an organic molecule that produces the following ir bands (cm-1): 2923, 1667, 1245, 1054?
The organic molecule would have a C-H stretching band at 2923 cm-1, a carbonyl stretching band at 1667 cm-1, and a C-O stretching band at 1245 cm-1.
Based on the IR bands given, we can predict the functional groups present in the organic molecule. The band at 2923 cm-1 indicates a C-H stretching vibration, which suggests the presence of alkyl or aromatic groups. The band at 1667 cm-1 indicates a carbonyl stretching vibration, which is characteristic of ketones and aldehydes.
The band at 1245 cm-1 indicates a C-O stretching vibration, which could suggest the presence of an alcohol or ether group. Finally, the band at 1054 cm-1 could indicate the presence of a C-O stretching vibration in a carboxylic acid or ester group. However, without additional information or further analysis, we cannot confidently predict the presence of this last functional group.
Learn more about stretching vibration here:
https://brainly.com/question/20630644
#SPJ11
Use the Text Submission box to answer the following question.
What are the major organic products are formed when the following compounds react with methylmagnesium bromide (CH₃MgBr), followed by the addition of dilute acid? a. propanal b. propanone
When propanal reacts with methylmagnesium bromide (CH₃MgBr) followed by the addition of dilute acid, the major organic product formed is 3-hydroxypropanal.
On the other hand, when propanone reacts with methylmagnesium bromide (CH₃MgBr) followed by the addition of dilute acid, the major organic product formed is 3-hydroxy-2-methylpropanal.
A dilute acid is a solution that contains a relatively small amount of acid dissolved in a solvent, usually water. Dilute acids are commonly used in various chemical and industrial processes, as well as in the laboratory.
In a dilute acid solution, the concentration of acid is low enough that it is not considered to be a concentrated or strong acid. The strength of an acid refers to its ability to donate protons (H+) to a solution, and is related to the concentration of the acid in the solution. Dilute acids typically have a lower pH value and are less reactive than concentrated acids.
Common examples of dilute acids include dilute hydrochloric acid (HCl), dilute sulfuric acid (H2SO4), and dilute nitric acid (HNO3). These acids are used in a variety of applications, such as cleaning and etching metals, producing fertilizers, and in the production of pharmaceuticals.
Visit here to learn more about dilute acid brainly.com/question/30906166
#SPJ11
the goal for the solver feature is to maximize the solution within the constraints set.
The solver feature is a mathematical tool that is designed to find the optimal solution to a problem within certain constraints. The goal of the solver feature is to maximize or minimize the objective function while satisfying the constraints set by the user. The solver can handle linear and nonlinear problems, and can be used in a variety of applications, including engineering, finance, and operations management.
The solver feature works by using an iterative process to find the best solution. It starts by evaluating the objective function and constraints at a set of initial values for the decision variables. The solver then adjusts the values of the decision variables and re-evaluates the objective function and constraints. This process is repeated until an optimal solution is found or a maximum number of iterations is reached. The solver can also be used to identify the sensitivity of the solution to changes in the constraints or objective function. Overall, the solver feature is a powerful tool for optimizing complex systems and processes.
To learn more about solution click here: brainly.com/question/1616939
#SPJ11
Gases generally have
A)low density
B) high density
C) closely packed particles
D) no increase in volume when temperature is increased
E) no decrease in volume when pressure is increased
Gases generally have low density because the particles in a gas are widely spaced. The answer is A) low density.
Unlike solids and liquids, the particles in a gas are widely spaced, which means that gases have low density. The low density of gases makes them highly compressible, and they can expand to fill any available space. When the temperature of a gas is increased, the particles gain kinetic energy and move more quickly, increasing the volume of the gas.
Similarly, when the pressure on a gas is increased, the particles are compressed, decreasing the volume of the gas. These properties of gases make them useful in many applications, including in air conditioning systems and in the production of various chemicals and materials.
Learn more about gases here:
https://brainly.com/question/1115149
#SPJ11
