Based on the Ksp and the concentration of Ag+ ions in the solution, the concentration of chloride ions in the solution is not sufficient to reach equilibrium, meaning AgCl is not in a saturated state.
The reaction is the equilibrium of AgCl (s) dissolving in water to form Ag+ (aq) and Cl- (aq) ions:
AgCl (s) → Ag+ (aq) + Cl- (aq)
The equilibrium constant for this reaction is known as the solubility product constant (Ksp). The Ksp for AgCl is 1.8 x 10⁻¹⁰, which means that at equilibrium, the product of the concentrations of Ag+ and Cl- ions is 1.8 x 10⁻¹⁰.
Given that the [Ag+] in the solution is 0.01 M, we can use the Ksp and the [Ag+] to calculate the [Cl-]:
Ksp = [Ag+] [Cl-] = 1.8 x 10⁻¹⁰
[Cl-] = Ksp / [Ag+] = 1.8 x 10⁻¹⁰ / 0.01 = 1.8 x 10⁻⁹ M
This is much higher than the concentration of chloride ions in the solution, which is 1 x 10⁻⁵ M. Therefore, the solution is not at equilibrium and AgCl is not in a saturated state.
Learn more about equilibrium at
brainly.com/question/29031056
#SPJ4
The salt NaHSO3 (Ka1(H2SO3) = 1.4×10-2; Ka2(HSO3-) = 6.5×10-8) undergoes hydrolysis upon dissolution in water. The complete (i.e. without any approximation made) proton balance for the system is:
This equation implies that there are two protons on the left side and two protons on the right side.
The proton balance for the systemNaHSO3 + H2O → Na+ + HSO3- + OH-
H2SO3 + 2 H2O → H3O+ + HSO3- + OH-
1.4 x 10-2 H3O+ + 6.5 x 10-8 HSO3- → 1.4 x 10-2 OH- + 6.5 x 10-8 H3O+
NaHSO3 -> Na+ + HSO3- (Ka1 = 1.4 x 10-2)
HSO3- -> H+ + SO32- (Ka2 = 6.5 x 10-8)
The complete proton balance for the system is:
NaHSO3 + H2O <=> Na+ + H3O+ + HSO3-
HSO3- + H2O <=> H+ + SO32- + H2O
NaHSO3 + H2O <=> Na+ + H3O+ + H+ + SO32-
So the proton balance is:
NaHSO3 + H2O <=> Na+ + 2 H3O+ + SO32-
The two acid dissociation constants (Ka1 and Ka2) determine the relative concentrations of the three species.At equilibrium, the concentrations of Na+, HSO3-, and SO32- will be determined by the equilibrium constants Ka1 and Ka2. The overall reaction equation for the hydrolysis of NaHSO3 can be written as:NaHSO3 + H2O <=> Na+ + 2 H3O+ + SO32-
This equation implies that the hydrolysis of NaHSO3 is a neutralization reaction, where the hydrogen ions from the acid (NaHSO3) are neutralized by the hydroxide ions in water.The two acid dissociation constants (Ka1 and Ka2) determine the relative concentrations of the three species and the pH of the solution.To learn more about The proton balance for the system refer to:
https://brainly.com/question/12449324
#SPJ1
which of the following solutions are acidic? select all that apply. multiple select question. O caco3 (aq)O ch3ch2cooh (aq) O h3po4 (aq) O hbr (aq) O naoh (aq)
Acidic solutions include those with HBr, H3PO4, and CH3CH2COOH.Any liquid that has more hydrogen ions per volume than water is considered acidic.
An acidic solution is what, exactly?Any liquid that has more hydrogen ions per volume than water is considered acidic; liquids with less hydrogen ions per volume are not. Acidic solution. One who or which has a pH greater than 7.0 is said to be an alkaline.An aqueous solution that has been exposed to an acid has hydrogen ions released into it. A base is something that liberates hydroxide ions. In terms of how they react with organic materials, bases are caustic and acids are corrosive.Acidic solutions include those with HBr, H3PO4, and CH3CH2COOH.Any liquid that has more hydrogen ions per volume than water is considered acidic.To learn more about Acidic solutions refer to:
https://brainly.com/question/24255408
#SPJ4
A certain substance has a fixed composition of S and Cl atoms regardless of its source. Which of the following statements about the substance is true?A.) The substance is a homogenous mixtureB.) The substance contains atoms of silicon and chlorineC.) The substance is a heterogenous mixtureD.) The substance is a compound that contains two elementsE.) The substance must contain equal numbers of S and Cl atoms
The answer was the substance is a compound that contains two elements.
What is meant by elements ?
A fundamental object that is difficult to divide into smaller bits is known as an element.An element is a substance that cannot be broken down by non-nuclear reactions in chemistry and physics.A discrete component of a larger system or collection is referred to as an element in computers and mathematics.The names nihonium, moscovium, tennessine, and oganesson are the official names for elements 113, 115, 117, and 118, respectively.A pure element is one that is made up of atoms of the same kind. Since sodium exclusively contains sodium atoms, it is a pure element. While various atom types make up cement and glass, respectively.To learn more about elements refer to
https://brainly.com/question/20096027
#SPJ4
Consider the following pair of nucleophiles in CH3OH. Which, a: F- or b: N3- is the better nucleophile? Answer typing a or b. Consider the following pair of nucleophiles in CH3OH. Which, a: CH3S- or b: H2O is the better nucleophile? Answer typing a or b.
According to the problem,Consider the following pair of nucleophiles in CH3OH. H2O is the better nucleophile.
What is the nucleophile ?
Nucleophiles are atoms or molecules that carry a negative charge and have the ability to form an electron-pair bond with a positive or partially positive atom. Common nucleophiles include hydroxide ions (OH–), amines (H2N–), and carboxylates (RCOO–). Nucleophiles are important in many organic reactions, such as substitution, elimination, and addition reactions. They are also important in biochemistry, where they facilitate enzyme-catalyzed reactions such as hydrolysis, oxidation, and reduction. In biochemistry, nucleophiles can attack the carbonaly carbon of an organic molecule, resulting in a covalent bond known as an ester or amide bond.
To learn more about nucleophile
https://brainly.com/question/14052597
#SPJ4
2Na + Cl2 → 2NaCl
1 mol Na = 22.990 g Na
1 mol Cl2 = 70.906 g Cl2
1 mol NaCl = 58.443 g NaCl
How many grams of NaCl could you make with 1.5 moles of Na?
a
112.45 g
b
87.665 g
c
23.125 g
d
38.962 g
What do you mean by 1 3 dipolar addition reaction?
The 1,3-dipolar addition, a chemical reaction between a 1,3-dipole and a dipolarophile, results in a five-membered ring. The first 1,3-dipolar cycloadditions weren't discovered until the latter part of 19th century.
The early 20th century, following the discovery of 1, 3-dipoles. From the food our bodies digest to the way the sunlight we receive is created, chemical reaction occur all around us. Understanding physical and chemical changes is essential before beginning chemical processes. A molecule is defined as a collection of two or more atoms held together by the attractive forces known as chemical bonds; depending on the context, the term may or may not include ions that fit this criteria.
Learn more about chemical reaction here
https://brainly.com/question/29039149
#SPJ4
What is the mass, in grams, of 9.56 x 10 molecules of methanol (CH, OH) ?
The mass of given no. of molecules of methanol will be 508 grams.
First , we have to calculate the no. of moles. So, No of moles = No. of molecules / avagadros no. Therefore :
⇒9.56 x [tex]10^{23}[/tex] / 6.02 x [tex]10^{23}[/tex]
⇒15.875 moles
Now, We know that the molecular mass of methanol is 32 grams. So, we can calculate the mass by simply multiplying the molecular mass with moles.
Therefore,
⇒15.875 x 32
⇒508.00 grams
Learn more about mole concept here,
https://brainly.com/question/22540912
The complete question should be ,
What is the mass, in grams, of 9.56 x [tex]10^{23}[/tex] molecules of methanol (CH, OH) ?
Why is the CH3OH polar and not non polar? Also why is the structure tetrahedral and not octahedral? It has 6 sides.
I am so confused
Calculate how many grams of Aluminum are needed to produce 21.6 grams of Aluminum oxide (Al2O3).
4Al + 3O2 → 2Al2O3
a
5.71 g Al
b
132 g Al
c
11.43 g Al
d
26.982 g Al
chemistry slay bslay slay slay
The third term of the sequence is 19. The term to term rule when we reverse the order of the sequence is subtract 13 then divide by 6.
How to find terms in a sequence?The sequence has three terms. Its term to term rule is as follows:
multiply by 6 and then add 13.
The first term of the sequence is -2.
By using the rule the third term can be found as follows:
Second term:
-2 × 6 + 13 = - 12 + 13 = 1
Third term
1 × 6 + 13 = 6 + 13 = 19
Therefore, the first three terms are as follows:
-2, 1, 19
Now, let's reverse the three terms of the sequence,
19, 1, -2
Therefore, the term to term rule of the sequence is as follows:
subtract 13 then divide by 6
Learn more on sequence here:
brainly.com/question/26151197
#SPJ1
The gas chromatograph, in combination with the _________________, can separate the components of a drug mixture and then unequivocally identify each substance present in the mixture.
- Mass Spectrometer
The gas chromatograph, in combination with the mass Spectrometer, can separate the components of a drug mixture and then unequivocally identify each substance present in the mixture.
A mass spectrometer can only determine a molecule's mass after it has changed into a gas-phase ion. To do this, it charges molecules electrically and converts the resulting flow of electrically charged ions into a proportionate electrical current that a data device can then read. The components of a drug mixture are separated by the gas chromatograph and mass spectrometer, which then positively identify each component. By electrically charging molecules, which results in a flow of electrically charged ions, it does this.
learn more about chromatograph here:
brainly.com/question/29442779
#SPJ4
A sample of sodium sulfate (MM = 142.04 AMU/molecule) was found to contain 5.4 x 1018 oxygen atoms. What was the mass of the sample in AMUs?
The mass of the sodium sulfate sample is 0.00126grams.
How to calculate mass?The mass of a substance can be calculated by multiplying the number of moles in the substance by its molar mass as follows:
mass = no of moles × molar mass
According to this question, a sample of sodium sulfate (MM = 142.04 amu/molecule) was found to contain 5.4 x 10¹⁸ oxygen atoms. The number of moles can be calculated as follows:
no of moles = 5.4 × 10¹⁸ ÷ 6.02 × 10²³ = 0.89 × 10-⁵ moles = 0.0000089moles
mass = 0.0000089moles × 142.04 amu/molecule
mass = 0.00126grams.
Learn more about mass at: https://brainly.com/question/16386473
#SPJ1
match each soluble ionic compound with the number of moles of ions formed when 1 mole of each compound is dissolved into water. cacl2 cacl2 drop zone empty. nabr nabr drop zone empty. fe(no3)3 fe(no3)3 drop zone empty. 3 moles of ions 4 moles of ions 2 moles of ions need help? review these concept resources.
3 moles, 2 moles, 4 moles. soluble ionic compound with the number of moles of ions formed when 1 mole of each compound is dissolved into water. cacl2 cacl2 drop zone empty.
nabr nabr drop zone empty. fe(no3)3 fe(no3)3 drop zone empty. 3 moles of ions 4 moles of ions 2 moles of ions need help review these concept resources.Moles (nevi) are a form of skin growth that is rather frequent. Clusters of pigment-forming cells lead them to look as tiny, dark brown dots (melanocytes). The majority of people have 10 to 40 moles that form during childhood and adolescence and may alter or vanish over time. A non-cancerous condition of pigment-producing skin cells that is generally known as birth markings or moles.This form of mole is frequently big and is caused by a disease involving melanocytes, or pigment-producing cells (melanin). Melanocytic nevi can be rough, flat, or elevated in appearance. They might be present at birth or appear later in life. Melanocytic nevi can develop malignant in rare cases.
learn more about moles here:
https://brainly.com/question/26416088
#SPJ4
three, two, and four moles An ideal gas combination is made up of 4 moles of hydrogen, 2 moles of helium, and 1 mole of water vapour. What is the mixture's molar specific heat at a constant
Why are you asking this I wonder. Are you uncertain as to whether the term "hydrogen" refers to hydrogen molecules or hydrogen atoms (H)? (H2)
The query contains a hint: molar mass
We are dealing with the macro world which is the one in which we reside, and in this world, "hydrogen exists as H2 molecules. There has a 2 g/mol molar mass.
If a question reads "You are dealing with atoms while dealing with hydrogen atoms
You are working with molecules if an inquiry asks about "hydrogen molecules
Since hydrogen occurs as molecules in the larger universe, you are dealing with molecules if an inquiry asks, "hydrogen
Learn more about moles of hydrogen here:
https://brainly.in/question/25363072
#SPJ4
Select the type of chemical bond that most commonly forms between each combination of elements as indicated.
Metallic bond → _____
Covalent bond → _____
Ionic bond → _____
Two or more metal atoms
Metal to nonmetal
Nonmetal to nonmetal
The type of chemical bond that most commonly forms between each combination of elements is Metallic bond → metallic, Covalent bond → covalent, Ionic bond → ionic.
A metallic bond is a type of chemical bond that forms between two or more metal atoms. The metallic bond is characterized by the sharing of electrons between the atoms, creating a metallic lattice structure. This type of bonding results in a strong bond that gives metals their characteristic properties such as high melting points, ductility, and conductivity.
A covalent bond is a chemical bond in which atoms share electrons. Covalent bonds typically form between nonmetal atoms and are characterized by the sharing of electrons between atoms. Covalent bonds are typically strong and result in stable compounds. They are commonly found in compounds such as water, methane and carbon dioxide.
An ionic bond is a chemical bond in which one atom loses an electron to another atom. Ionic bonds typically form between metal atoms and nonmetal atoms. Ionic bonds are characterized by the transfer of electrons, resulting in the formation of ions. Ionic bonds are typically strong and result in stable compounds, They are commonly found in compounds such as sodium chloride (NaCl) and calcium chloride (CaCl2).
To know more about covalent bond
https://brainly.com/question/10777799
#SPJ4
metals are excellent conductors of electricity. nonmetals are poor conductors of electricity and are called insulators. some elements have the ability to conduct electricity roughly between that of metals and nonmetals. give some examples of these elements, and name the class they belong to
Examples of elements that conduct electricity between that of metals and nonmetals are carbon, silicon, and germanium.
What is electricity?Electricity is a form of energy that is created when electrons move from one atom to another. It is a form of energy that can be used to power a variety of appliances, from lights to computers to refrigerators. Electricity is created when electrical charges move through a conductor, such as a wire. It can also be stored in batteries for later use. Electricity can be very dangerous and should always be handled with care.
These elements belong to a class called semi-conductors. Semi-conductors are materials that can be manipulated to allow them to either conduct or insulate electricity depending on their application. They are an integral part of many electronic circuits, whether it be for computers, phones, or other electronic devices. Semi-conductors are also used in photovoltaic cells, which are used to convert solar energy into electricity.
To know more about electricity click-
https://brainly.com/question/24154868
#SPJ4
The density of grain alcohol is 0.789 g/mL. Given that the density of water at 4 C° is 1.00 g/mL, what is the specific gravity of grain alcohol? Enter your answer in provided box.
Density and specific gravity are related but not the same, Specific gravity is defined as the ratio of the density of a substance to the density of a reference substance. In this case, the reference substance is water, and it is commonly assumed to be water at 4°C (39.2°F) and is generally given as 1.000 g/cm3 (or 1.000 g/ml).
So, the specific gravity of grain alcohol = Density of grain alcohol / Density of water at 4°C = 0.789 g/mL / 1.00 g/mL = 0.789.
This value is dimensionless and it is used to compare the density of different substances with water.
Write a balanced chemical equation describing the dissolution (dissolving) of strontium fluoride. Determine the molar solubility of SrF2 in a 0.5 mol/L solution of Sr(NO3)2. (Strontium nitrate is a highly soluble salt)
The balanced chemical equation for the dissolution of strontium fluoride in water is: SrF2 (s) + H2O (l) --> Sr(NO3)2 (aq) + 2F- (aq) and The molar solubility of SrF2 in a 0.5 mol/L solution of Sr(NO3)2 is approximately 3.8 x 10^-7 mol/L.
How to calculate molar solubility of SrF2?
The molar solubility of SrF2 in a 0.5 mol/L solution of Sr(NO3)2 can be determined using the solubility product constant (Ksp) of SrF2. The Ksp of SrF2 is 2.9 x 10^-11.
The solubility of SrF2 in a 0.5 mol/L solution of Sr(NO3)2 can be calculated by using the expression:
Ksp = [Sr2+] [F-]^2
where [Sr2+] is the molarity of the Sr2+ ions and [F-] is the molarity of the F- ions.
The solubility of SrF2 in a 0.5 mol/L solution of Sr(NO3)2 can be calculated by using the expression:
[Sr2+] = Ksp / [F-]^2
The molar solubility of SrF2 in a 0.5 mol/L solution of Sr(NO3)2 is approximately 3.8 x 10^-7 mol/L
To learn more about molar solubility, visit: https://brainly.com/question/30265969
#SPJ1
which of the following correctly represents an oxidation or reduction reaction? choose all that are correctly matched? A.oxidation of pyruvate to CO 2B.oxidation of NAD +to NADH C.reduction of pyruvate to CO 2D. reduction of NAD + to NADH
Oxidation of pyruvate to CO2, oxidation of NAD+ to NADH, reduction of NAD+ to NADH correctly represents an oxidation or reduction reaction. Thus, option A, B, D is the answer.
An oxidation reaction is a chemical reaction in which a molecule loses one or more electrons. A reduction reaction is a chemical reaction in which a molecule gains one or more electrons.
Oxidation of pyruvate to CO2 represents an oxidation reaction because pyruvate loses electrons and becomes CO2 in this reaction.
Oxidation of NAD+ to NADH represents an oxidation reaction because NAD+ loses electrons and becomes NADH in this reaction.
Reduction of pyruvate to CO2 is not a correct statement because pyruvate is a molecule that loses electrons in the process of oxidation, not reduction.
Reduction of NAD+ to NADH represents a reduction reaction because NAD+ gains electrons and becomes NADH in this reaction.
Learn more about oxidation:
https://brainly.com/question/25798412
#SPJ4
The mass of a mole of carbon atoms is 12.011 grams. What is the mass of a single atom of carbon? 1.9 x 10-23 g atom 1.995 x 10-23 2 x (6.022 x 10²3) 2.0 x 10²3 atom atomn
The mass of a single atom of carbon is 1.9 x 10-²³ g/atom (option A).
How to calculate mass of single atom?An atom is the smallest possible amount of matter which still retains its identity as a chemical element, now known to consist of a nucleus surrounded by electrons.
According to this question, the mass of a mole of carbon atoms is 12.011 grams.
1 mole of carbon atom = 12g
1 mole of a carbon atoms = 6.022 × 10²³ atoms
Hence, mass of 6.022 × 10²³ atoms of carbon = 12g
Mass of 1 atom of carbon = 12 ÷ 6.022 ×10²³ = 1.9 × 10-²³ g/atom.
Therefore, 1.9 × 10-²³ g/atom is the mass of a single atom of carbon.
Learn more about atom at: https://brainly.com/question/29695801
#SPJ1
Given the reactions: Mg(s) + 2H2O(l) → Mg(OH)2(s) + H2(g) For the reaction to occur at the greatest rate, 1 gram of Mg(s) should be added in the forms of
a. large chunks
c.small chunks
b. a ribbon (a thin, long piece)
d. a powder
How do I even answer and draw this? Can someone answer this for me please
ewhat grade is this
Explanation:
Two forms of butane known as n-butane and iso-butane form an equilibrium according to the reaction n-butane (g) iso-butane (g) If the equilibrium constant for this reaction is 23,which set of concentrations listed below represents an equilibrium of these two compounds? 3) (n-butane] 0.04 M [iso-butane] = 0.27 M In-butane] 0.45 M liso-butane] 0.22 M In-butane] 0.23 M liso-butane] 0,01 M In-butane] 0.02 M fiso-butane] 0.46 M
If the equilibrium constant for this reaction is 23, set (3) (n-butane] 0.04 M [iso-butane] = 0.27 M, of concentrations represents an equilibrium of these two compounds.
The equilibrium constant for a reaction is the ratio of the product concentrations to the reactant concentrations at equilibrium, raised to their stoichiometric coefficients. In this case, the reaction is:
n-butane (g) <==> iso-butane (g)
The equilibrium constant for this reaction, Kc, is defined as:
Kc = [iso-butane]/[n-butane]
Therefore, if the equilibrium constant is given as 23, then at equilibrium:
[iso-butane]/[n-butane] = 23
Out of the given sets of concentrations, only set 3) represents an equilibrium of these two compounds:
[n-butane] = 0.04 M
[iso-butane] = 0.27 M
Because:
[iso-butane]/[n-butane] = 0.27/0.04 = 6.75 which is close to the equilibrium constant of 23. The other sets of concentrations represent different ratios of [iso-butane]/[n-butane] which is not equal to 23 and thus not in equilibrium.
To know more about equilibrium please refer: https://brainly.com/question/15118952
#SPJ4
The amount of emitted photons detected by a PMT is directly proportional to the amount of time the detector is allowed to acquire light. Herb is making fluorescence measurements when his Xe source explodes. He is able to scrounge up an old Xe source he can use put it only has 42 percent of the power output of his original source. If his original scan time was 1.25 seconds, what will his scan time be with the new source?
If his original scan time was 1.25 seconds, 3 seconds will be his scan time be with the new source.
What is photon?The discrete packet (or quantum) containing electromagnetic (as well as light) energy known as a photon is referred to as a photon. In a vacuum, which is a region that is entirely empty, photons are always moving at the same speed as light to everyone observers.
Number of photons detected = (Power output of source) x (Scan time)
Power output of new source = 0.42 x Power output of original source
Number of photons detected = (Power output of new source) x (New scan time)
Number of photons detected = (0.42 x Power output of original source) x (New scan time)
Number of photons detected = (Power output of original source) x (1.25 seconds)
dividing both side by Power output of original source to get:
(New scan time) = (Number of photons detected) / (0.42 x Power output of original source)
(New scan time) = (1.25 seconds) / (0.42)
(New scan time) = 3 seconds
Therefore, 3 seconds will be his scan time be with the new source, if his original scan time was 1.25 seconds.
To know more about photon, here:
https://brainly.com/question/12015967
#SPJ1
elect all that apply which of the accompanying depictions show the electron distribution in the h2o molecule correctly? select all that apply. multiple select question. a b c d
Tetrahedral H2O has an electrical geometry, Water is classified as tetrahedral in terms of electron-group geometry since it has four electron groups.
Which statement most accurately characterizes a covalent species with four electron groups revolving around the primary atom?Two bonded pairs and two lone pairs result in a bent shape being visible. - A tetrahedral system has all four electron pairs acting as bonding partners.Tetrahedral H2O has an electrical geometry.A quantitative way to express binding polarity is the dipole moment. When the electron density is unevenly distributed within a bond or molecule, a dipole moment results.Water is classified as tetrahedral in terms of electron-group geometry since it has four electron groups.To learn more about Water refer to:
https://brainly.com/question/1313076
#SPJ4
If light travels exactly 1 meter in 1/299,772,458 of a second, how many kilometers does it travel in 4.00 years? for this question, 1 year = 365.25 days.
To solve this problem, we need to convert the time in years to seconds, and then multiply it by the speed of light to find the distance traveled.
First, we'll convert the time in years to days: 4.00 years * 365.25 days/year = 1461 days
Now we'll convert days to seconds: 1461 days * 24 hours/day * 60 minutes/hour * 60 seconds/minute = 31,557,600 sec
Now we can multiply the time in seconds by the speed of light to find the distance traveled: 31,557,600 sec * (1 meter / (1/299,772,458)) = 9.461*10^16 meters
To express the distance in kilometers we need to divide the distance in meters by 1000
9.46110^16 meters / 1000 = 9.46110^13 kilometers.
So, light travels 9.461*10^13 kilometers in 4.00 years.
To know more about Light
https://brainly.com/question/10728818
with reference to their rf values, rank the four amino acids in terms of their solubility in the solvent used
The four amino acids that are ranked in terms of their solubility in the solvent used, according to the Rf values, are Leucine, Arginine, Alanine, and Glycine.
What is Rf value?The retention factor (Rf value) is important in chromatography because it can be used to predict where a specific substance will be located on the chromatogram. This is due to the fact that the Rf value measures how far a specific substance has traveled relative to the solvent front.The presence of a high retention factor indicates a strong interaction between the compound of interest and the surface. This also implies that the compound of interest is highly soluble in the mobile phase.Moving molecules with a small Rf are less soluble in the hydrophobic (non-polar) solvent they are larger and also have a greater affinity towards the hydrophilic paper than molecules with a larger Rf.To learn more about Rf value refer to :
https://brainly.com/question/17796724
#SPJ4
reaction 1: reaction 2: reaction 3: the chemical equations and equilibrium expressions for two reactions at the same temperature are given above. based on the information, which of the following expressions can be used to calculate the value of for reaction 3 at the same temperature? (a) (b) (c) (d)
The expression for K3 = 1K1×1K2 when the chemical equations and equilibrium expressions for two reactions at the same temperature are given.
A rate law illustrates how a chemical reaction's rate is influenced by the reactant's concentration. For a reaction like aA -> A, the rate law frequently takes the form rate = k[A]n, where k is the proportionality constant known as the rate constant and n is the order of the reaction.
Given the reactions as:
CO(g)+3H2(g)⇄CH4(g)+H2O(g)
the rate law for the above equation is (K1) = [CH4][H2O]/[CO][H2]^3
Then [H2]^3 = [CH4][H2O]/K1[CO]
CO2(g)+H2(g)⇄CO(g)+H2O(g)
the rate law for the above equation is (K2) = [CO][H2O]/[CO2][H2]
[CO2] = [CO][H2O]/K2[H2]
CH4(g)+2H2O(g)⇄CO2(g)+4H2(g)
Similarly the rate law for the above equation is (K3) = [CO2][H2]^4/[CH4][H2O]^2
Then K3 = [CO][H2][CH4][H2O][H2O]/K2[H2]K1[CO]
Then K3 = 1K1×1K2
To learn more about equilibrium click here https://brainly.com/question/29359391
#SPJ4
complete question: Reaction 1:CO(g)+3H2(g)⇄CH4(g)+H2O(g), K1=[CH4][H2O][CO][H2]3 . Reaction 2:CO2(g)+H2(g)⇄CO(g)+H2O(g), K2=[CO][H2O][CO2][H2]. Reaction 3:CH4(g)+2H2O(g)⇄CO2(g)+4H2(g)then K3=?
The chemical equations and equilibrium expressions for two reactions at the same temperature are given above. Based on the information, which of the following expressions can be used to calculate the value of K3 for reaction 3 at the same temperature?
Calculate the volume in liters of a 0.12 mol/L potassium dichromate solution that contains 175. g of potassium dichromate (K,Cr₂O₂). Round your answer to 2 significant digits. OL S
The volume of the potassium dichromate solution is 15.58 liters.
What is the molar mass of potassium dichromate?The molar mass of potassium dichromate, also known as potassium bichromate, is 294.19 g/mol. Molar mass is the mass of one mole of a substance, which is defined as Avogadro's number of atoms or molecules. The molar mass of a substance can be calculated by adding up the atomic masses of all the atoms in its chemical formula. In the case of potassium dichromate, its chemical formula is K2Cr2O7. The molar mass is calculated by adding up the atomic masses of 2 atoms of potassium (K), 2 atoms of Chromium (Cr) and 7 atoms of Oxygen (O) (2* 39.0983 + 252.00 + 716.00 = 294.19 g/mol).
To know more about Molar Mass visit: https://brainly.com/question/22997914
#SPJ1
: identify the structures of each amino acid and classify each amino acid. the structures of each amino acid are shown.
Aliphatic, aromatic, acidic, basic, acid amide, sulfur and cyclic amino acids. Based on characteristic of functional group amino acids are classified as: polar and non-polar amino acids.
What is meant by functional?
Functional refers to an object's operation or usefulness. It also denotes that it relates to how it performs or operates.A mathematical machine known as a function accepts one or more numbers as inputs and outputs another number.One or more functions may be inputs to a functional, which outputs a number. A Functional is a function of Functions, then.All biological activities, including digestion, elimination, respiration, and others, can be performed by a cell. The functional unit of life is referred to be such for this reason. Each and every living thing is made up of cells, which are the smallest unit of life.To learn more about functional refer to
https://brainly.com/question/22340031
#SPJ4
Osmosis may be defined as the movement of a solvent through a semipermeable membrane from a region of higher solute concentration to one of lower solute concentration True False
False. Osmosis may be defined as the movement of a solvent through a semipermeable membrane from a region of lower solute concentration to one of higher concentration.
Osmosis can be defined as the movement of solvent particles or water from lower solute concentration to higher solute concentration through the semipermeable membrane. This process does not require any energy. This requires only a concentration gradient. Semipermeable membranes are very thin layers of material which allows some things to pass through them. The movement of a solvent through a semipermeable membrane from a region of higher solute concentration to one of lower solute concentration is called diffusion.
To learn more about Osmosis please visit:
https://brainly.com/question/2811191
#SPJ4
