a solution of hydrochloric acid contains 1.5 moles of the solute in 2.0 liters of solution. calculate the molarity of this solution

Answer:

49 g/L is the concentration of the acid

Explanation:

Firstly, we proceed to write the equation of reaction.

2NaOH + H2SO4 ——-> Na2SO4 + 2H2O

We can see that 1 mole of the base reacted with two moles of the acid.

kindly note that dm^3 is same as liter

Firstly, we need to get the concentration of the reacted sulphuric acid in g/L

we use the simple titration equation below;

CaVa/CbVb = Na/Nb

From the question;

Ca = ?

Va = 25 cm^3

Cb = 20 g/L

we convert this to concentration in mol/L

Mathematically, that is concentration in g/L divided by molar mass in g/mole

molar mass of NaOH = 40 g/mol

so we have; 20g/L / 40 = 0.5 mol/L

Vb = 50 cm^3

Na = 1

Nb = 2

Where C represents concentrations, V volumes and N , number of moles

Now, substitute the values;

Ca * 25/0.5 * 50 = 1/2

25Ca/25 = 0.5

So Ca = 0.5 mol/L

Now to get the concentration of H2SO4 in g/L

What we do is to multiply the concentration in mol/L by molar mass in g/mol

That would be 0.5 * 98 = 49 g/L

The concentration of the acid in grams per litre is 49g/L

From the question,

We are to determine concentration of the sodium hydroxide solution.

First, we will write a balanced chemical equation for the reaction.

The balanced chemical equation for the reaction is

2NaOH + H₂SO₄ → Na₂SO₄ + 2H₂O

This means,

2 moles of NaOH is required to completely neutralize 1 mole of H₂SO₄

From the formula

[tex]\frac{C_{A}V_{A} }{C_{B}V_{B} }=\frac{n_{A} }{n_{B} }[/tex]

Where

[tex]C_{A}[/tex] is the concentration of acid

[tex]C_{B}[/tex] is the concentration of base

[tex]V_{A}[/tex] is the volume of acid

[tex]V_{B}[/tex] is the volume of base

[tex]n_{A}[/tex] is the mole ratio of acid

[tex]n_{B}[/tex] is the mole ratio of base

From the question

[tex]V_{A}= 25 \ cm^{3}[/tex]

[tex]C_{B} = 20 \ g/dm^{3}[/tex]

Convert this to mol/dm³

Molar mass of NaOH = 40 g/mol

Using the formula

[tex]Concentration\ in \ mol/dm^{3} =\frac{Concentration\ in \ g/dm^{3}}{Molar\ mass}[/tex]

∴ Concentration of the NaOH in mol/dm³ = [tex]\frac{20}{40}[/tex]

Concentration of the NaOH in mol/dm³ = 0.5 mol/dm³

∴ [tex]C_{B} = 0.5 \ mol/dm^{3}[/tex]

and

[tex]V_{B} = 50 \ cm^{3}[/tex]

From the balanced chemical equation

[tex]n_{A} = 1[/tex]

[tex]n_{B} = 2[/tex]

Putting the parameters into the formula, we get

[tex]\frac{C_{A} \times 25}{0.5 \times 50}= \frac{1}{2}[/tex]

Now, this becomes

[tex]2 \times 25 \times C_{A}=0.5 \times 50 \times 1[/tex]

Then, we get

[tex]50 C_{A} = 25[/tex]

∴ [tex]C_{A} = \frac{25}{50}[/tex]

[tex]C_{A} = 0.5 \ mol/dm^{3} = 0.5 \ mol/L[/tex]

Now, we will determine the concentration in g/L

From the formula,

Concentration in g/L = Concentration in mol/L × Molar mass

From the question,

Molar mass of sulfuric acid = 98

∴ Concentration of the acid in g/L = 0.5 × 98

Concentration of the acid in g/L = 49 g/L

Hence, the concentration of the acid in grams per litre is 49g/L

Learn more here: https://brainly.com/question/25290615

Answer:

wavelength = 6 cm .

Explanation:

frequency given = 5 x 10⁹ .

wavelength = velocity of light / frequency

= 3 x 10⁸ / 5 x 10⁹

= .06 m

= 6 cm

Answer:

  presents longitude lines as parallel

Explanation:

The Mercator projection shows longitude lines as  parallel, hence greatly distorts sizes and distances near the poles. A useful feature is that a course of constant bearing shows as a straight line.

Answer:

C.) presents longitude lines as parallel

Explanation:

Took it on E2020

Answer: orbitals supernumerary

Explanation:

Answer:

both S orbital and p orbitals

Explanation:

took the exam got the question right.

Answer:

people are mostly exposed to chemicals through their nose, mouth, eyes, and ears

Explanation:

they are the easiest way for anything, bad or good, to enter the body because  people touch their face alot.

This might not answer what you were looking for but the other answer covered it pretty well so I thought I'd give you another angle to the question!

Hope this helps!!

Answer:

Milk of Magnesia would consume the most stomach acid at almost 3 times the amount as baking soda.

Explanation:

Baking Soda = NaHCO3(s)+HCl(aq)=H20(l)+CO2(g)

NaHCO3 Molar mass of 84.007 g/mol

0.012 Moles of NaHCO3 and since an equal ratio of HCl is required

we therefore neutralize 0.012 Moles of HCl

Milk of magnesia = Mg(OH)2(s)+2HCl(aq)=2H20(l)+MgCl2(aq)

Mg(OH)2(s) Molar mass: 58.3197 g/mol

0.017 Moles of Mg(OH)2 and the ratio is 2:1, so 2 moles for each 1 mole of Mg(OH)2, so we need 0.034 Moles of HCl

Answer:

255.5cm³

Explanation:

A solution that is 38.08 % by weight has 38.08g of sulfuric acid per 100g of total solution. Thus, mass of solution you need to obtain 125g is:

125g H₂SO₄ × (100g solution / 38.08g H₂SO₄) = 328.3g of solution

As density of the solution is 1.285g / cm³, the volume of 328.3g is:

328.3g × (1cm³ / 1.285g) = 255.5cm³

Answer:

One of the most common ways of producing UV light is passing an electric current through vaporized mercury or some other gas. This type of lamp is commonly used in tanning booths and for disinfecting surfaces. The lamps are also used in black lights that cause fluorescent paints and dyes to glow.Explanation:

Some Energy is released into the environment as heat

Explanation:

Answer:

The answer is Observation 1 is a result of copper atoms losing two electrons.

Explanation:

The electrons result in the color change of the copper strip, causing the gray particles to join onto the metal.

Answer:

C

Explanation:

Observation 1 is a result of the copper atoms losing two electrons. It came out as the right answer.

Answer:

The final temperature of the mixture is 44.9°C

Explanation:

Mass of the substance (gold) = 2.575g

Specific heat capacity of gold = 0.129J/g°C

Initial temperature (T1) = 75°C

Final temperature (T2) = ?

Energy lost = 10J

Heat energy(Q) = MC∇T

Q = heat energy (in this case lost)

M = mass of the substance

C = specific heat capacity of the substance

∇T = change in temperature of the substance = (T2 - T1)

Q = MC∇T

Q = MC(T2 - T1)

-10 = 2.575 × 0.129 × (T2 - 75) energy is -ve because it was energy lost.

-10 = 0.3321 × (T2 - 75)

-10 = 0.3321T2 - 24.9075

Collect like terms

0.3321T2 = 24.9075 - 10

0.3321T2 = 14.9075

T2 = 14.9075 / 0.3321

T2 = 44.88

T2 = 44.9°C

The final temperature of the mixture is 44.9°C

Answer: H2 + MgCl2

Explanation: As they are on the right side of the equation/ are the products being made as a result of the reaction, they are the products.

Answer:

The new volume is 1,000ml

Explanation:

Mathematically, we know that the number of moles per ml(volume) should be constant irrespective of the increase.

Initially, we have a volume of 500 ml and number of moles of 2.5 moles

The ratio of the number of moles to the volume is 2.5/500 = 0.005 mole/ml

Now, this is expected to remain the same even if we have an increment.

let’s call the new volume x

0.005 mol/ml = 5 moles/x ml

x = 5/0.005 = 1,000 ml

Answer:

The correct answer to the following question will be Option C.

Explanation:

So that Option C will be the right answer.

Answer: Quartz

Explanation: I looked it up ;)

Answer:

1) Conditions necessary for rusting are:

a) Presence of atmospheric oxygen or air

b)Presence of water or moisture

2) For protecting the iron gate, we can paint it because the paint will coat it and protect it from atmospheric oxygen and water.

3) Magnesium, Carbon and Oxygen (MgCO₃)

Answer:

the second one I think...

Answer:

The answer is the first one.

Acceleration is the change of velocity

Velocity is another term for speed with direction.

Answer:

A. 35Cl1-

Explanation:

Chlorine needs 1 more electron to have full octet thus will take 1 electron and possess a -1 charge.

Answer:

If you look at yourself in the front of the spoon, you see that the mirror forms an inverted real image.

Explanation:

The word 'concave' means to bend inwards.

A curved mirror is a mirror that has a curved reflecting surface.

The front side of the spoon is just like a concave mirror. If you look at yourself in the front of the spoon, you see that the mirror forms an inverted real image.

Concave mirrors produce real inverted image of an object only if it is placed further away from the mirror than the focal point.

Answer:

It shows me upside down like a ghost. OoooOooh

Explanation:

Boo

Answer:

[tex]\large \boxed{\text{-92 $^{\circ}$C}}[/tex]

Explanation:

We can use the Ideal Gas Law and solve for T.

pV = nRT

Data  

p = 1.25 atm

V = 25.0 L

n = 2.10 mol

R = 0.082 06 L·atm·K⁻¹mol⁻¹

Calculations

1. Temperature in kelvins

[tex]\begin{array} {rcl}pV & = & nRT\\\text{1.25 atm} \times \text{25.0 L} & = & \rm\text{2.10 mol} \times 0.08206 \text{ L}\cdot\text{atm}\cdot\text{K}^{-1}\text{mol}^{-1} \times T\\31.25&=&0.09847T\text{ K}^{-1}\\T& = &\dfrac{31.25}{\text{0.098 47 K}^{-1}}\\\\& = &\text{181 K}\end{array}[/tex]

2. Temperature in degrees Celsius

[tex]\begin{array} {rcl}T & = & (181 - 273.15) \, ^{\circ}\text{C}\\& = & -92 \, ^{\circ}\text{C}\\\end{array}\\\text{The temperature of the gas is $\large \boxed{\mathbf{-92 \, ^{\circ}}\textbf{C}}$}[/tex]

Answer:

Sulfur?

Explanation:

Sulfur has 6 valence electrons and does not have luster.

Answer:

5.449 x 10¹⁸ Hz

Explanation:

Energy (E) =Frequency (F) x Plancks constant (h)

F= 3.611x10⁻¹⁵J / 6.626 x 10⁻³⁴ Js⁻¹

F =5.449 x10¹⁸ s⁻¹ or 5.449 x 10¹⁸ Hz

Answer:

A lower pH of the mouth creates bad bacteria that eventually lead to decay of the tooth.  

It can be prevented by avoiding food that causes acidity.

Explanation:

Tooth decay is caused by the pH level in the mouth dropping below 5.5, meaning it is acidic. It can be prevented by brushing your teeth as toothpaste is an alkali which will neutralise the pH level in your mouth.

Hope this helps

Answer:

Explanation:

Since Lithium gives away one electron, I believe it goes to Sulfur.

Hope this helps! :)

Answer:

Li*2S

Explanation:

ed tell chem

Answer:

A.) -5448 kJ/mol

Explanation:

I got it correct on founders edtell

Answer:

a) 64.27%

b) 58%

c) ethanol is the limiting reactant

d) ethanol is the limiting reactant

Explanation:

We have to note that the expected yield is the theoretical yield while the actual mass or amount of product formed is the actual yield.

a) theoretical yield=68.3g

Actual yield= 43.9 g

Percentage yield= 43.9/68.3 ×100

Percentage yield= 64.27%

b) theoretical yield= 0.0722 moles

Actual yield = 0.0419

Percentage yield= 0.0419/0.0722 × 100

Percentage yield= 58%

c) note that the limiting reactant yields the least number of moles of product

Ethanol will be the limiting reactant since it is not present in excess.

d) from the reaction equation;

1 mole of acetic acid produces 1 mole of ethyl acetate

0.58 moles of ethanol produces 0.58 moles of ethyl acetate

1 mole of acetic acid yields 1 mole of ethyl acetate

Hence 0.82 moles of acetic acid yields 0.82 moles of ethyl acetate

Hence ethanol is the limiting reactant.

Answer:

The answer is protons and nuetrons

Explanation:

Answer:

The total number of molecules in each phase stays constant

Explanation:

i just took the test and got it right.

In the dynamic equilibrium between 2 phases, the total number of molecules in each phase stays constant (Option D).

Dynamic equilibrium occurs when the direct and reverse rates are equal and the concentrations remain constant over time.

Which describes two phases in dynamic equilibrium?

In the dynamic equilibrium between 2 phases, the total number of molecules in each phase stays constant (Option D).

Learn more about dynamic equilibrium here: https://brainly.com/question/12920261

#SPJ4

Answer:

Explanation:es porque las especies con nichos idénticos tienen las mismas necesidades, lo que significa que competirían exactamente por los mismos recursos.

Answer:

Explanation:

V1/T1 =V2/T2    at constnant pressure

Answer:

c

Explanation: