A spaceship hovering over the surface of Venus drops an object from a height of 33 m. How much longer does it take to reach the surface than if dropped from the same height on Earth? Neglect air resistance in both cases. [The acceleration due to gravity on Venus is 90.7% of that on Earth,
gVenus = (0.907)g.]

The gravitational force between any two bodies is inversely proportional to the square of the distance between them. The distance from Earth at which the force of gravity exerted by Earth on the spacecraft cancels the force exerted by the Moon on the spacecraft is 384,400 km.

Gravitational force is a natural phenomenon by which all objects with mass attract each other. This force is one of the four fundamental forces of nature, and is the weakest of the four. It is the force that binds us to the Earth and keeps our feet firmly planted on the ground.

Part A: The gravitational force between any two bodies is inversely proportional to the square of the distance between them. Therefore, the force of gravity exerted by Earth on the spacecraft will be equal to the force of gravity exerted by the Moon on the spacecraft when the distance between them is equal to the Moon's orbit semimajor axis.

Part B: The Moon's orbit semimajor axis is 384,400 km. Therefore, the distance from Earth at which the force of gravity exerted by Earth on the spacecraft cancels the force of gravity exerted by the Moon on the spacecraft is 384,400 km.

To two significant digits, the answer is 384,400 km.

To know more about gravitational force, visit

brainly.com/question/12528243

#SPJ4

Minimum, First Quarter, Median, Third Quarter, Maximum 1.700 2.500 2.700 2.752 2.950 4.200,the length (x) [1] 27 boxplot(x,main="Data boxplot")

We may create the boxplot by doing the following:

Data provided

These procedures can be used to create the necessary boxplot.

Order the data set first.

1.7 2.0 2.2 2.2 2.4 2.5 2.5 2.5 2.6

2.6 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.9

2.9 2.9 3.0 3.0 3.1 3.1 3.3 3.6 4.2

2) Determine the median.

Since there are 27 variables, position 14 would be the median in this situation.

Average = 2.7

3) Determine Q1.

Below 2.7 are the following data values: 1.7 2.0 2.2 2.4 2.5 2.5 2.5 2.6 2.6. Their median falls in the centre: Q1 = 2.5

4) Determine Q3.

The following data values are found above 2.7: 2.8 2.8 2.8 2.9 2.9 3.0 3.0 3.1 3.3 3.6 4.2.

Their median is in the centre: Q3 = 2.95

5) Determine the maximum and minimum.

Min = 1.7, Max = 4.2

6) Determine IQR

IQR= Q3-Q1= 2.95-2.5=0.45

7) The boxplot's minimum and maximum values

IQR = 2.5-1.5*0.45=1.825; MWB = Q1-1.5

IQR = 2.5 + 1.5 * 0.45 = 3.17 UWB = Q3 + 1.5

8) Recognize outliers

Potential outlier values include those that exceed UWB and fall below MWB.

And using the R code below, we can create the boxplot:

> x<-c(1.7, 2.0, 2.2, 2.2, 2.4, 2.5, 2.5, 2.5, 2.6,

+ 2.6, 2.6, 2.7, 2.7, 2.7, 2.8, 2.8, 2.8, 2.9,

+ 2.9, 2.9, 3.0, 3.0, 3.1, 3.1, 3.3, 3.6, 4.2)

To recap: (x)

Minimum, First Quarter, Median, Third Quarter, Maximum

1.700 2.500 2.700 2.752 2.950 4.200

the length (x)

[1] 27

boxplot(x,main="Data boxplot")

And as you can see, the image below is also connected.

To learn more about boxplot refer to:

https://brainly.com/question/14746483

#SPJ4

Average power Pavg created by the force F is 48 watts, instantaneous power P at t = 10s is 480 watts.

To find the average power created by the force F, we can use the formula:

Pavg = (Work done by the force) / (time interval)

The work done by the force F can be found using the formula:

Work = force x distance

The distance is the displacement of the sled, which can be found using the formula:

distance = (initial velocity + final velocity) / 2 * time

The sled starts from rest, so its initial velocity is 0 m/s.

We know that the acceleration of the sled is 0.08 m/s^2 and the time is 1 minute, which is 60 seconds.

So the final velocity is:

final velocity = 0 + 0.08 m/s^2 x 60s = 4.8 m/s

We know that the force F is 600 N, so the work done by the force is:

Work = F x distance = 600 N x (4.8 m/s) = 2880 J

We know that the time interval is 1 minute, which is 60 seconds.

So the average power created by the force F is:

Pavg = Work / time interval = 2880 J / 60s = 48 watts (to 3 significant figures)

To find the instantaneous power P at t = 10s, we can use the formula:

P = F x v

where v is the velocity of the sled at time t.

We can find the velocity of the sled at time t using the formula:

v = v0 + a*t

where v0 is the initial velocity (0 m/s), a is the acceleration (0.08 m/s^2) and t is the time (10s)

so we can substitute v = v0 + a*t

v = 0 + 0.08 m/s^2 x 10s = 0.8 m/s

We know that the force F is 600 N, so the instantaneous power P created by the force F at t=10s is:

P = F x v = 600 N x 0.8 m/s = 480 watts (to 3 significant figures)

To know more about average power please refer: https://brainly.com/question/14831024

#SPJ4

Answer: Depends

Explanation:

It completely depends on your religion and beliefs. This is not a question you can truly answer since it's opiniative.

The height of the fountain is 9.6 m.

The radius of the pool is calculated by applying the formula for circumference of a circle.

P = 2πr

where;

r = ( P ) / ( 2π )

r = ( 34.8 ) / ( 2π )

r = 5.54 m

The height of the fountain is calculated as follows;

the angle of elevation, radius of the pool and the height of the fountain forms a right triangle.

let the height of the fountain = h

tan 60 = h / r

h = r x tan 60

h = ( 5.54 m ) x tan 60

h = 9.6 m

Learn more about height here: https://brainly.com/question/974651

#SPJ1

One way to provide gravity in space is to spin a cylinder. The centripetal acceleration is provided by the normal force of the outside wall .

However, in the broader sense, gravity is indeed a force because it describes the resulting interaction between two masses. Gravitational effects are fundamentally caused by the warping of spacetime and the motion of objects through the warped spacetime. However, the end result is as if a force was applied.

The numerical value for the acceleration of gravity is most accurately known as 9.8 m/s/s. There are slight variations in this numerical value (to the second decimal place) that are dependent primarily upon on altitude.

To know more about gravity visit

https://brainly.com/question/12008506

#SPJ1

The spinning of a cylinder is one method of creating gravity in space. The outer wall's normal force produces the centripetal acceleration.

But in a larger sense, gravity is a force because it represents the interaction that happens when two masses are in close proximity to one another. Fundamentally, the curvature of geometry and the passage of things through the stretched spacetime are what produce gravitational effects. However, the outcome appears to be the consequence of applying force.

The most precise measurement of the gravitational acceleration is 9.8 m/s/s. This number has small fluctuations (to the first significant digit) that are mostly determined by altitude.

To know more about gravity visit:

https://brainly.com/question/940770

#SPJ1

The answer to the question is Option A i.e. the forces form an action-reaction pair, and the child velocity is five times the velocity of the adult and in the opposite direction.

According to Newton’s third law of motion (every force has an equal and opposite reaction force), when two bodies interact, both of them apply forces on one another that are equal in magnitude but opposite in direction. This third law of motion by Newton is also known as the law of action and reaction and the forces form a action-reaction force.

Thus, when the adult pushes the child with a force of any magnitude, the child pushes the adult with the same magnitude force but in opposite direction thus the forces are a form of action-reaction pair.

as, F = ma and the forces are equal in magnitude for both, the velocity of the adult and that of the child have an inverse relation as that of masses of both, thus the velocity of child is five times that of the adult.

Thus, the answer to the question is Option A.

ALSO, the conditions follow the law only because the man and the child are standing on a frictionless floor i.e. ice so there is no static friction in play holding the heavier mass back for force to be nullified.

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ4

When the melting point, liquid density, and gas density are specified, 1.360 L of liquid nitrogen is created.

We presume that the specified volume of gas is fully liquefied because no other requirements are provided (no equilibrium gas phase).

Determine the mass of nitrogen as follows:

241.0L * 4.566 g/L = 1100.406g.

Determine the amount of liquid nitrogen based on the mass determined in step 2:

Volume = mass/liquid density = 1100.406g/L = 1.360 L.

A liquid's density is a measurement of how heavy it is for the amount measured. When two liquids of identical weight or volume are weighed, the heavier liquid is more dense. A liquid that is less dense than water will float on the surface of the water if it is gently added to the surface.

The correct question is:

At the boiling point, the density of liquid nitrogen is 809 g/L and that of the gas is 4.566 g/L. How many liters of liquid nitrogen are produced when 241.0 L of nitrogen gas is liquefied at 77.36 K?

Learn more about Density here:

https://brainly.com/question/6329108

#SPJ4

The electric potential moving along the central axis of the ring from a distance of 3r away to the center of the ring is decreasing. Thus, Option b is correct.

Radius is a term used in geometry to describe the length of a line extending from the center of a circle to the edge of the circle. This line is also referred to as the radius of the circle. The radius is half the distance of the diameter, which is the line that goes from one side of the circle to the other. The radius is also used in other shapes such as ellipses, rectangles, and polygons.

This is because the electric field lines radiate outward from the circumference of the ring, and as a result, the electric potential is lower near the circumference and higher further away from the circumference. As one moves closer to the center of the ring, the electric potential decreases.

To know more about radius click-

brainly.com/question/24375372

#SPJ4

Full question:

A circular thin ring of radius r has a negative charge uniformly distributed around its circumference. which of the following is the best qualitative description of the electric potential moving along the central axis of the ring from a distance of 3r away to the center of the ring?

a. Increasing

b. Decreasing

c. Accelerating

d. Retαrding

Heat will flow from hotter region to the colder region. When a cold piece of  metal is placed in hot water heat will flow from water to the metal.

Heat energy will transfer between regions over a temperature gradient. Heat flows from hotter regions to colder regions to balance the total heat energy.

In solids, heat transfer takes place by conduction mechanism where one hotter molecules transfers the energy to nearest molecules in the closely packed chain. In liquids and gases, heat transfers through convection.

When a cold piece of metal is paced in hot water, the heat energy from the water will flow to the colder metal. Hence, the temperature of water will reduce.

Find more on heat transfer;

https://brainly.com/question/13433948

#SPJ1

The patterns would you observe if you started at sea level and traveled upward through the earth's atmosphere to an elevation of 100 km are-

In this case, Option B and F are correct.

The atmosphere is what?

To know more about atmosphere click-

brainly.com/question/30157320

#SPJ4

Which of the following patterns would you observe if you started at sea level and traveled upward through the Earth's atmosphere to an elevation of 100 km? Choose one or more:

A. a progressive decrease in temperature

B. decreasing pressure

C. changes from warming trends to cooling trends at distinct boundaries D. increasing pressure

E. increasing density

F. decreasing density

O-ring seal failure caused the fatal magnitude the of the An O-ring, a spherical gasket used to seal the right rocket booster, was found to be the primary culprit in the mishap.

On the Challenger, the O-ring had a circumference of 12 feet. As the igniters ignite the fuel upon launch, there seems to be high pressure on the inside of the solid rocket boosters. The parts holding the O-ring flexed slightly as a result of the pressure.

He was required to appear before an executive panel, and when he did, he informed the commission's chairman, William Rogers, that Morton Thiokol had been so worried about the Aaaaa that they had advised NASA not to launch the spacecraft in conditions that were cooler than 53 degrees.

To know more about magnitude visit :

https://brainly.com/question/28173919

#SPJ4

The average force applied to the skull by the fist is 5.9 kg x 498 m/s2, or 2,945 N.

Force is an action that can cause an object to change its motion and/or shape. It can be an external force, such as gravity, or an internal force, such as friction. Forces can be applied by a single object, such as pushing on a wall, or they can be the result of two objects interacting, such as when two objects collide. Newtons are used to measure force, which is a vector quantity both with magnitude and direction.

F = m x a

formula a = (Vf - Vi) / t

Therefore, the average force that the fist exerts on the head is 5.9 kg x 498 m/s2, which equals 2,945 N.

To learn more about force

https://brainly.com/question/13191643

#SPJ4

Answer:

About 4.4 seconds

Explanation:

[tex]h=1/2(gt^{2} )[/tex]

[tex]t^{2} =\frac{2h}{g}[/tex]

[tex]t=\sqrt{\frac{2h}{g} }[/tex]

[tex]t=\sqrt{\frac{2(93)}{9.8} } =\sqrt{18.98} =4.36[/tex]

Hope this helps

Erikson believed that the adverse effect of early childhood was an excessively rigid superego that led to children feeling excessive guilt as a result of adults' excessive threats, criticisms, and punishments.

A body that does not deform or change shape is idealized as a rigid body. Formally, it is described as a group of particles with the property that their distance from one another does not change as the body moves. A solid body that neglects deformation is referred to as a rigid body. In other words, regardless of the forces acting on a rigid body, the distance between any two points remains constant over time. A metal rod serves as an illustration of a rigid body.

Here,

Erikson thought that an excessively rigid superego, brought on by adults' excessive threats, criticisms, and punishments, was the negative effect of early childhood, which caused children to experience excessive guilt.

To know more about rigid,

https://brainly.com/question/17156004

#SPJ4

The magnitude οf the impulse is  −1120 Ns.

In its simplest form, an impulse is a fοrce that has been gradually integrated. By dividing the force's magnitude by the length of time it is applied, we can calculate the impulse's size for a force with a constant magnitude.

From the infοrmation given, the fοllowing can be deduced:

Height = 10m

Mass = 64kg

The kinetic energy is calculated as 1/2mv² while pοtential energy is calculated as mgh. Frοm the law of conversation:

[tex]\mathrm{ \dfrac{1}{2} mv^2 = mgh}[/tex]

[tex]\mathrm{v = \sqrt{2gh} }[/tex]

[tex]= \sqrt{2} \times \sqrt{9.8 } \times\sqrt{9}[/tex]

= 13.28 m/s

The change in velocity will be;

= 80(0 - 14)

= 80 × (-14)

= −1120 Ns

In cοnclusion, the magnitude οf the impulse is −1120 Ns.

Learn mοre about impulse on:

brainly.com/question/229647

#SPJ4

When two forces are applied in the same direction, we can use the vector addition to find the net force. The net force is found by adding the magnitudes of both forces.

In this case, the two forces are 225 N and 165 N, and they are applied in the same direction.

Therefore, the net horizontal force on the box is:

Net force = force 1 + force 2 = 225 N + 165 N = 390 N

This means that the net force acting on the box is 390 N when two horizontal forces, 225 N and 165 N, are exerted on the box in the same direction.

Speed is the rate at which an object moves, while velocity is the speed of an object in a given direction, and acceleration is affected by both speed and velocity, as an increase in either can cause an increase in acceleration.

To learn more about speed and velocity refer to:

https://brainly.com/question/21729272

#SPJ4

The gravitational field strength on the surface of Ganymede is equal to 1.75 × 10^11 m/s^2. This is approximately 200 times the gravitational field strength of Earth.

Gravitational field is a region of space that is affected by the gravitational force of a massive object, such as a planet or star. It is the region in which any mass inside it experiences the force of gravity, and any mass outside of it does not. Gravitational fields can be measured in units called Newtons per kilogram (N/kg). The strength of the gravitational field is proportional to the mass of the object, with more massive objects creating stronger fields. In general, gravity is the weakest of the four fundamental forces, but it still has a profound effect on the behavior of matter and energy.

The gravitational field strength on the surface of Ganymede can be determined using Newton's law of gravity. According to this law, the force of gravity between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. Therefore, the gravitational field strength on the surface of Ganymede is equal to the gravitational force of Jupiter divided by the square of the distance between them.

The mass of Jupiter is 1.898 × 10^27 kg and the distance between Jupiter and Ganymede is 1.07 × 10^9 meters. Therefore, the gravitational field strength on the surface of Ganymede is equal to 1.75 × 10^11 m/s^2. This is approximately 200 times the gravitational field strength of Earth.

To know more about gravitatonal field click-
https://brainly.com/question/28437652
#SPJ4

Time=0.9/2.998*10^8 is the equation for how long it takes light to travel 90 cm.

Velocity is the rate and direction of an object's movement, whereas speed is the time rate at which an object is moving along a path. In other words, velocity is a vector, whereas speed is a scalar value. the speed at which an object's position changes in any direction. The distance traveled in relation to the time it took to travel that distance is how speed is defined. The direction of a body or object's movement is defined by its velocity. In its basic form, speed is a scalar quantity. In essence, velocity is a vector quantity. It is the speed at which distance changes. It is the displacement change rate.

Here,

distance=90 cm=0.9 m

speed=2.998*10^8 m/s

thus time taken will be:

=distance/speed

time=0.9/2.998*10^8=0.10006 seconds

thus the expression is:

time=0.9/2.998*10^8

The expression for how long does it take light to travel 90 cm is time=0.9/2.998*10^8.

To know more about speed,

https://brainly.com/question/9998060

#SPJ4

It is illegal to follow an emergency vehicle at a distance of less than 500 feet or to stop within 300 feet of where an emergency vehicle is responding to an alarm.

Maintaining a safe distance from an emergency vehicle enhances the safety of both the emergency vehicle's crew and other drivers on the road by providing the emergency vehicle with the necessary space to maneuver and respond quickly to an alarm. When an emergency vehicle is responding to an alarm, it may need to make sudden stops, turns or change speed quickly, and if the vehicle behind is too close, it may not be able to react in time and cause an accident. By maintaining a safe distance, other drivers can react in a timely manner to the emergency vehicle's movements, reducing the risk of collisions and accidents. Additionally, maintaining a safe distance can also help to increase visibility for the emergency vehicle's crew, which can help them to navigate through traffic more safely and quickly. This ultimately contributes to the safety of all parties involved.

This statement is referring to laws and regulations regarding the distance that a driver must maintain from an emergency vehicle that is responding to an emergency call or alarm. Following an emergency vehicle too closely, or stopping too close to where an emergency vehicle is responding to an alarm, can impede the emergency vehicle's ability to respond quickly and safely.

It is illegal to follow an emergency vehicle at a distance of less than 500 feet because this distance is considered to be too close and can pose a safety hazard to the emergency vehicle and its crew. When an emergency vehicle is responding to an alarm, it may need to make sudden stops, turns or change speed quickly and if the vehicle behind is too close, it may not be able to react in time and cause an accident.

It is also illegal to stop within 300 feet of where an emergency vehicle is responding to an alarm. Stopping too close to the emergency vehicle can block the view of other drivers and make it difficult for the emergency vehicle to maneuver. Additionally, it can impede the flow of traffic and make it difficult for other vehicles to pass, which can cause a backup and delay the emergency vehicle's response time.

In summary, these regulations are put in place to ensure the safety of emergency vehicle's crews and other people on the road, and to make sure that emergency vehicles can respond to an alarm quickly and safely.

To know more about safety hazard, visit: https://brainly.com/question/30275814

#SPJ4

The spring's elastic potential energy decreases and the gravitational potential energy increases.

What do you mean by potential energy?

Potential energy is the energy an object possesses because of its position or state. It is the energy an object has due to its height, position, or chemical composition. The unit of measurement for potential energy is usually Joules (J).

There are different types of potential energy, such as gravitational potential energy (GPE), elastic potential energy (EPE), and chemical potential energy.

When a mass is attached to a vertical spring, it causes the spring to stretch. As the spring stretches, it stores potential energy in the form of elastic potential energy (EPE). As the spring stretches, the potential energy stored in it increases.

At the same time, as the mass is attached to the spring and moves downward, it loses gravitational potential energy (GPE) due to the work done by gravity on the mass. Since the mass is moving downward, the gravitational force is acting in the opposite direction of the displacement, resulting in a decrease in GPE. Therefore, as the mass moves downward, the EPE of the spring increases and the GPE of the mass decreases.

Therefore, the spring's elastic potential energy decreases and the gravitational potential energy increases.

To learn more about potential energy from the given link:

https://brainly.com/question/24933254

#SPJ1

A projectile moves both vertically and horizontally independently of one another. Therefore, regardless of their horizontal velocities, two objects falling under the influence of gravity from the same height will hit the ground at the same time.

The vertical force acts perpendicular to the horizontal motion and has no effect on it because perpendicular components of motion are independent of one another. The projectile as a result moves with a decreasing vertical acceleration and a constant horizontal speed. The principle that horizontal and vertical motions are independent, or that they have no bearing on one another, is the most crucial one in projectile motion. The amount of time needed for an object to move initially horizontally is equal to the amount of time needed for the object to reach its final height. As a result, a ball dropped from the same height and thrown horizontally will both arrive at the ground simultaneously.

Here,

A projectile moves independently in both the vertical and horizontal axes. Therefore, two objects falling under the influence of gravity from the same height will hit the ground at the same time regardless of their horizontal velocities.

To know more about motion,

https://brainly.com/question/13966796

#SPJ4

The force responsible for the bouncing of the ball is the gravitational force.

According to Newton's law of universal gravitation, the gravitational force between any two bodies is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. Gravity is the force with which objects are attracted to the earth. Example - Leaves and fruit fall from a tree to the ground due to gravity. Gravitational energy is the energy stored in an object due to its height above the Earth (for example, when the object is far from the ground or near it). It is a form of potential energy. An object's height above the ground gives it its gravitational energy. This force is responsible for the bouncing of the ball when it hits the ground.

Learn more about the fundamental forces in

https://brainly.com/question/14110395

#SPJ4

The magnitude of the force exerted on the man by the lawn mower is equal in magnitude to the force exerted by the man on the lawn mower, thus the answer is the third option i.e. the same.

Following are the three Newton's Law of Motion:

First Law - Newton’s first law of motion states that if a body or a object is at rest or moving at any constant speed in a straight line, it will remain at rest or keep moving in that straight line at that constant speed unless it is acted upon by a force. This law is known as Law of Inertia.

Second Law - Newton’s second law of motion is a quantitative description of the changes that any force can produce/insert on the motion of a body. It states that the timely rate of change of the linear momentum of a body is equal in both the magnitude and the direction to the force imposed on it.

Third Law - Newton’s third law of motion states that when two bodies interact, they both apply forces to one another that are equal in magnitude and opposite in direction. This third law of motion is also known as the law of action and reaction.

Using principles of third law of motion, we can make that the man pushing the lawn mower applies the same amount of force (in magnitude) as the lawn mower applies on him, thus the answer to the question is the third option i.e. the same.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ4

When you park on a hill, the direction your front wheel are pointed determines which direction your car will roll if the brakes fail

Option D is correct.

Adjust your front tires so that, in the event of a brake failure, all front wheels are always pushed away from or lightly contact the curb if there is no curb.

When going uphill and coming close to a curb, turn the front tires against the curb. and make use of the curb as a barrier by letting your car slowly drift backward until the left rear wheel is resting there.

Turn the wheels to the curb.

Turn your vehicle away from the curb when parking uphill. Turn them so that they are facing the curb if you are parking downhill. Step on the brake while the vehicle is in neutral, then fully rotate the steering wheel in the desired direction.

Question incomplete:

When you park on a hill, the direction your ____ are pointed determines which direction your car will roll if the brakes fail.

A. Side mirror

B. doors

C.rear wheels

D.front wheels

Learn more about front wheel:

brainly.com/question/14040365

#SPJ4

Thee tilt of earth's axis causes the northern hemisphere to be closer to the sun than the southern hemisphere in summer, and vice versa in winter.

In this case, option A is correct.

Describe the seasons: Each season is a distinct time of year that can be recognized by special climatic characteristics. Every year, the seasons of spring, summer, fall, and winter follow one another. Each experiences cyclical patterns of light, climate, and weather every year.

Why are the seasons so important?

Soil saturation, precipitation patterns, river flows, lake concentrations, and snow cover are all impacted by seasonal variations in temperature and precipitation. Plants deteriorate and leaves fall as the wet and cold seasons approach. These alterations in the flora have an impact on the type and availability of food for humans and other animals.

To know more about seasons visit:

brainly.com/question/21698090

#SPJ4

You should use the thin cooking twine to have the fastest wave speed in  telephone.

The wave speed in string is determined by tension in the string and the mass per unit length (linear density) of the string.

The speed of a wave in a string is given by ; v = sqrt(T/μ)

T -- tension and μ-- linear density.

When comparing the two types of string, thin cooking twine has smaller mass per unit length (linear density) than the heavy rope, so it would have  faster wave speed.

The thinner the string, the less the density of the string and the faster the wave speed will be. Therefore, you should use the thin cooking twine to have the fastest wave speed in your telephone.

To know more about wave speed, refer

https://brainly.com/question/29798763

#SPJ4

A field study is more appropriate that a laboratory experiment when we need to know the real mining of unknown variables in a given outcome such as for example dark matter in space.

Unknown variables in science can be defined as variables that have yet to be identified or studied, either due to a lack of data or unknown factors.

Therefore, with this data, we can see that unknown variables in science such as the amount of  Dark matter in the Universe are able to be shown by field (observational) studies.

Learn more about variables in science here:

https://brainly.com/question/28362817

#SPJ1

Answer:

A stone is thrown up wards with an initial velocity of 25 m/s at an angle of 30 to the ground.