Q1(A) Velocity of wind is 32.6 m/s. Q2(A) Drag force on the model car is 1828 N. Q3(A) the correct answer is Increased by a factor of 3^4.
Question 1A square section rubbish bin of height 1.25 m × 0.2 m × 0.2 m filled uniformly with rubbish tipped over in the wind. It has no wheels, has a total weight of 100 kg, and rests flat on the floor.
Assuming that there is no lift, the drag coefficient is 1.0, and the drag force acts halfway up, what was the wind speed in m/s?
Solution: Given, Height of square section rubbish bin, h = 1.25 m
Width of square section rubbish bin, w = 0.2 m
Depth of square section rubbish bin, d = 0.2 m
Density of air, ρ = 1.225 kg/m3
Total weight of rubbish bin, W = 100 kg
Drag coefficient, CD = 1.0
The drag force acts halfway up the height of the rubbish bin.
The velocity of wind = v.
To find v,We need to find the drag force first.
Force due to gravity, W = m*g100 = m*9.81m = 10.19 kg
Volume of rubbish bin = height*width*depth
V = h * w * d
V = 0.05 m3
Density of rubbish in bin, ρb = W/Vρb
= 100/0.05ρb
= 2000 kg/m3
Frontal area,
A = w*h
A = 0.25 m2
Therefore,
Velocity of wind,
v = √(2*W / (ρ * CD * A * H))
v = √(2*100*9.81 / (1.225 * 1 * 1 * 1.25 * 0.2))
v = 32.6 m/s
Question 2A large family car has a projected frontal area of 2.0 m2 and a drag coefficient of 0.30.
Ignoring Reynolds number effects, what will the drag force be on a 1/4 scale model, tested at 30 m/s in air?
Solution: Given,
Projected frontal area, A = 2.0 m2
Drag coefficient, CD = 0.30
Velocity, V = 30 m/s
Let FD be the drag force acting on the original car and f be the scale factor.
Drag force on the original car,
FD = 1/2 * ρ * V2 * A * CD;
FD = 1/2 * 1.225 * 30 * 30 * 2 * 0.3;
FD = 1317.75 N
The frontal area of the model car is reduced by the square of the scale factor.
f = 1/4
So, frontal area of the model,
A’ = A/f2
A’ = 2.0/0.16A’
= 12.5 m2
The velocity is same for both scale model and the original car.
Velocity of scale model, V’ = V
Therefore, Drag force on the model car,
F’ = 1/2 * ρ * V’2 * A’ * CD;
F’ = 1/2 * 1.225 * 30 * 30 * 12.5 * 0.3;
F’ = 1828 N
Question 3 The volume flow rate is kept the same in a laminar flow pipe but the pipe diameter is reduced by a factor of 3, the pressure drop will be:
Solution: Given, The volume flow rate is kept the same in a laminar flow pipe but the pipe diameter is reduced by a factor of 3.
According to the Poiseuille's law, the pressure drop ΔP is proportional to the length of the pipe L, the viscosity of the fluid η, and the volumetric flow rate Q, and inversely proportional to the fourth power of the radius of the pipe r.
So, ΔP = 8 η LQ / π r4
The radius is reduced by a factor of 3.
Therefore, r' = r/3
Pressure drop,
ΔP' = 8 η LQ / π r'4
ΔP' = 8 η LQ / π (r/3)4
ΔP' = 8 η LQ / π (r4/3*4)
ΔP' = 3^4 * 8 η LQ / π r4
ΔP' = 81ΔP / 64
ΔP' = 1.266 * ΔP
Therefore, the pressure drop is increased by a factor of 3^4.
Increased by a factor of 3^4
To know more about square visit:
https://brainly.com/question/30556035
#SPJ11
Consider the integral 2∫8 (3x2+2x+5)dx (a) Find the Riemann sum for this integral using left endpoints and n=3. L3 (b) Find the Riemann sum for this same integral, using right endpoints and n=3. R3=___
(a) The Riemann sum for the given integral using left endpoints and n=3 is L3= 180.
(b) The Riemann sum for the given integral using right endpoints and n=3 is R3= 222.
To find the Riemann sum, we need to divide the interval [2, 8] into n subintervals of equal width and evaluate the function at either the left or right endpoint of each subinterval.
(a) For the left endpoints Riemann sum, we divide the interval [2, 8] into three subintervals of width Δx = (8-2)/3 = 2. The left endpoints of the subintervals are x0 = 2, x1 = 4, and x2 = 6.
The Riemann sum using left endpoints is given by:
L3 = Δx * [f(x0) + f(x1) + f(x2)]
= [tex]2 * [(3(2^2) + 2(2) + 5) + (3(4^2) + 2(4) + 5) + (3(6^2) + 2(6) + 5)][/tex]
= 180
(b) For the right endpoints Riemann sum, we use the same subintervals but evaluate the function at the right endpoints of each subinterval.
The Riemann sum using right endpoints is given by:
R3 = Δx *[tex][f(x1) + f(x2) + f(x3)][/tex]
= [tex]2 * [(3(4^2) + 2(4) + 5) + (3(6^2) + 2(6) + 5) + (3(8^2) + 2(8) + 5)][/tex]
= 222
Therefore, the Riemann sum for the given integral using left endpoints and n=3 is L3= 180, and the Riemann sum using right endpoints and n=3 is R3= 222.
To learn more about Riemann sum, click here: brainly.com/question/29012686
#SPJ11
Analyze and sketch a graph of the function. Find any intercepts, relative extrema, points of inflection, and asymptotes.
y = x / x^2 + 49
Intercept (x,y) = (_____)
relative minimum (x,y) = (_______)
relative maximum (x, y) = (______)
points of inflection (x, y) = (______)
(x, y) = (______)
(x,y) = (_______)
Find the equations of the asymptotes. (Enter your answers as a comma-separated list of equations.)
___________
Intercept (x,y) = (0, 0); No relative extrema or points of inflection; Asymptotes: Vertical: x = 0, Horizontal: y = 0.
To analyze the function y = x / (x^2 + 49), let's first identify the intercepts. The y-intercept occurs when x = 0:
y = 0 / (0^2 + 49) = 0 / 49 = 0
So the y-intercept is (0, 0). To find the x-intercept, we set y = 0 and solve for x:0 = x / (x^2 + 49)
Since the numerator is zero, we have x = 0 as the x-intercept as well.
Next, let's look for any relative extrema and points of inflection. We can take the derivative of the function to find the critical points. Differentiating y = x / (x^2 + 49) using the quotient rule, we get:
dy/dx = (x^2 + 49 - x(2x)) / (x^2 + 49)^2= (49 - x^2) / (x^2 + 49)^2
Setting the derivative equal to zero, we find the critical points:
49 - x^2 = 0
x^2 = 49
x = ±7
However, these points are not critical points since the denominator (x^2 + 49)^2 is always positive and the derivative does not change sign.
Therefore, there are no relative extrema or points of inflection in this function.Moving on to asymptotes, we can find them by analyzing the behavior of the function as x approaches positive or negative infinity. As x approaches infinity or negative infinity, the term x^2 + 49 dominates the function. Thus, we can approximate the function as:
y ≈ x / (x^2)
≈ 1 / x
From this approximation, we can see that as x approaches positive or negative infinity, y approaches 0. Hence, we have a horizontal asymptote at y = 0.
Additionally, since the function has a denominator of x^2 + 49, there are no vertical asymptotes.
Therefore, the equations of the asymptotes are: y = 0 (horizontal asymptote). There are no vertical asymptotes in this function.
Learn more about Asymptotes here:
brainly.com/question/32038756
#SPJ11
Find the lateral (side) surface area of the cone generated by revolving the line segment y=7/x, 0≤x≤5, about the x-axis. Check your answer with the following geometry formula.
Lateral surface area =1/2× base circumference × slant height
The lateral surface area of the cone generated by revolving the line segment y = 7/x, 0 ≤ x ≤ 5, about the x-axis can be calculated using the formula: Lateral surface area = 1/2 × base circumference × slant height.
To find the lateral surface area, we first need to determine the base circumference and the slant height of the cone. The base circumference is the same as the circumference of the circle formed by revolving the line segment about the x-axis. The slant height is the length of the curved surface of the cone.
The base circumference can be found by considering the circle formed when x = 5. At this point, the y-coordinate is 7/5, so the radius of the circle is 7/5. The circumference of the circle is given by 2πr, where r is the radius.
The slant height can be found by considering the length of the line segment y = 7/x from x = 1 to x = 5. We can use the arc length formula to calculate the length of the curved surface.
Once we have the base circumference and the slant height, we can substitute these values into the formula for lateral surface area to find the answer.
learn more about lateral surface area here
https://brainly.com/question/15476307
#SPJ11
The complete question is:
Find the lateral (side) surface area of the cone generated by revolving the line segment y=2/3x, 0≤x≤4, about the x-axis. Check your answer with the following geometry formula. Lateral surface area=1/2 x base circumference x slant height
. Let X be the 6-point DFT of x = [1, 2, 3, 4, 5, 6]. Determine the sequence y whose DFT Y[k] X-k)6], for k = 0,1,...,5.
To obtain sequence y, we compute the inverse DFT of X, extend it to a length of 12, perform the DFT on the extended sequence, and subtract X_ext[k-6] from X_ext[k] to get Y_ext. The first 6 elements of Y_ext represent y.
To determine the sequence y whose DFT Y[k] = X[k] - X[k-6], where X is the 6-point DFT of x = [1, 2, 3, 4, 5, 6], we can follow these steps:
1. Compute the 6-point inverse DFT of X to obtain the time-domain sequence x. Since X is already the DFT of x, this step involves taking the conjugate of each element in X and dividing by 6 (the length of x).
2. Append six zeros to the end of x to ensure it has a length of 12.
3. Compute the 12-point DFT of the extended x sequence to obtain X_ext.
4. Calculate Y_ext[k] = X_ext[k] - X_ext[k-6] for k = 0,1,...,11.
5. Extract the first 6 elements of Y_ext to obtain the desired sequence y.
In summary, to find y, we compute the inverse DFT of X, extend it to a length of 12, perform the DFT on the extended sequence, and finally, subtract X_ext[k-6] from X_ext[k] to obtain Y_ext. The first 6 elements of Y_ext correspond to the sequence y.
Learn more About sequence from the given link
https://brainly.com/question/7882626
#SPJ11
(help asap?)
The Sisyphus monastery is on a hill, and every day donkeys climb the hill
carrying water from the well in the valley. There are many donkeys, and they leave the well (at the bottom of the hill) every 15 minutes. They take one hour to climb the hill, 10 minutes to unload their water, and then half an hour to return to the well.
When a donkey goes uphill carrying water, in the middle of the day, how many does it pass coming down?
A container ship is overtaking an oil tanker on the way out of Harwich
Harbor, and the first mate notices that if he starts walking from the front of the container ship when the two ships start overlapping, he reaches the back as the two ship separate. He walks at 3 km/hour.
If the container ship is 100 m long, and travelling at 12 km/hour, how long is the oil tanker?
Since it takes one hour for a donkey to climb the hill, 10 minutes to unload, and half an hour to return to the well, the total time for a round trip is 1 hour + 10 minutes + 30 minutes = 1 hour and 40 minutes.
Since the donkeys leave the well every 15 minutes, in one hour and 40 minutes, there are 100 minutes. Therefore, the number of donkeys passing the middle point during this time is 100 minutes / 15 minutes = 6.67.
Since we cannot have a fraction of a donkey, we round down to the nearest whole number. Thus, the donkey going uphill carrying water passes 6 donkeys coming down.
Learn more about round here;
https://brainly.com/question/29022222
#SPJ11
02) a) Find the period of ze given by S LT 137 FindH) for hin] =8) +26m-1)+28-2+6n-3) and show that the ter has a linear phase term Determine and plot the result in of convolution between xin) and hin] given below n = ẩn + I20 + số - 48 – 2) -[n+2)+50[n+1+30[m] zin) = cos (1.1rn) + sin (0.7mm)
The convolution of the given signals is defined as:
[tex]y_n = x_n * h_n = ∑[k=-∞ to +∞] (x_k * h_(n-k))[/tex] .
The term S LT 137 stands for the signal, and the given function H_n has a degree of 3, making it a third-order filter. We need to find the period of the signal S LT 137.
The period of the signal is given by the formula below:
T = (2π / ω)
The value of ω can be obtained from the given signal, which is:
S LT 137 = cos(1.1n) + sin(0.7n)
The value of ω can be determined as:
ω = 1.1
Since the value of ω is given in radians/sec, we need to convert it into radians/sample. We know that 1 sec = F_s samples. So, the above equation can be written as:
ω_samp = (ω / 2πF_s) = (1.1 / 2π)
Now, substituting the values in the formula to find the period, we get:
T = (2π / ω_samp) = (2π / (1.1 / 2π)) = 11.44 samples
Next, we need to determine if the given function H_n has a linear phase term.
The phase term of the given function H_n can be obtained as follows:
[tex]ϕ(ω) = tan^(-1)[(ω - ω_o) / β][/tex]
Where ω_o is the phase shift in radians, and β is the rate of phase change with frequency.
In the given equation, we have:
[tex]H_n = (8 + 26m^(-1) + 28n^(-2) + 6n^(-3))[/tex]
Thus, the phase shift is 0 radians, and the rate of phase change with frequency β is also 0.
Therefore, the given function H_n does not have any linear phase term.
Now, we need to determine and plot the result of convolution between x_n and h_n.
The given values of x_n and h_n are:
x_n = cos(1.1n) + sin(0.7n)
[tex]h_n = (8 + 26m^(-1) + 28n^(-2) + 6n^(-3))[/tex]
The convolution of the given signals is defined as:
[tex]y_n = x_n * h_n = ∑[k=-∞ to +∞] (x_k * h_(n-k))[/tex]
To know more about convolution visit :
https://brainly.com/question/31056064
#SPJ11
Which statement is true?
A. All rectangles are squares.
B. All quadrilaterals are squares.
C. All rhombuses are parallelograms.
D. All triangles are quadrilaterals.
(04.03 MC) Find an equivalent system of equations for the following system:
2x + 4y = 4
−5x + 5y = 5
A) 2x + 4y = 4
−3x + y = −1
B) 2x + 4y = 4
7x + 5y = −1
C)2x + 4y = 4
7x − y = −1
D)2x + 4y = 4
7x − y = 5
Option B, C, and D do not match the equivalent system of equations we derived. Hence, the correct answer is A) 2x + 4y = 4, -x + y = 1.
To find an equivalent system of equations for the given system:
2x + 4y = 4
−5x + 5y = 5
We can start by manipulating the second equation to make the coefficients of x in both equations the same. Let's multiply the second equation by 2:
2(−5x + 5y) = 2(5)
This simplifies to:
-10x + 10y = 10
Now we have:
2x + 4y = 4
-10x + 10y = 10
Next, we can simplify the equations by dividing both sides of the second equation by 10:
-10x/10 + 10y/10 = 10/10
This simplifies to:
-x + y = 1
Now we have:
2x + 4y = 4
-x + y = 1
We have obtained an equivalent system of equations where the coefficients of x in both equations are the same. Therefore, the correct answer is:
A) 2x + 4y = 4
-x + y = 1
Option B, C, and D do not match the equivalent system of equations we derived. Hence, the correct answer is A) 2x + 4y = 4, -x + y = 1.
for more such question on equations visit
https://brainly.com/question/17145398
#SPJ8
Find the x-intercepts for the equation. Write as ordered pair(s). Write DNE if it does not exist. y=x^2−x−30
The x-intercepts of the equation y=x^2−x−30 are (-5, 0) and (6, 0).
To find the x-intercepts, we set y to zero and solve for x. Setting y=0 in the equation x^2−x−30=0, we have the quadratic equation x^2−x−30=0. We can factor this equation as (x−6)(x+5)=0. To find the x-intercepts, we set each factor equal to zero: x−6=0 and x+5=0. Solving these equations, we find x=6 and x=−5.
Therefore, the x-intercepts of the equation y=x^2−x−30 are (-5, 0) and (6, 0). This means that the graph of the equation intersects the x-axis at these points. The ordered pairs (-5, 0) and (6, 0) represent the values of x where the graph crosses the x-axis and y is equal to zero.
Learn more about intercept here
https://brainly.com/question/14180189
#SPJ11
Relational models view data as part of a table or collection of tables in which all key values must be identified. a. True b. False.
The statement is True. Relational models view data as part of a table or collection of tables in which all key values must be identified is True. Relational models define data as a collection of tables where all key values are identified.
A table comprises of rows and columns. Each column has a distinct heading, and each row corresponds to a single record. In this type of model, each table is identified using a unique key, which is a set of columns that define a unique identity for each record. Relational databases are classified into multiple tables.
These tables relate to one another with the aid of foreign keys, which are unique identifiers for records in a table. The relational model is a simple, simple, and extremely scalable data model. It is also widely employed and supported by most database management systems.
As a result, the relational model is commonly used for online transaction processing (OLTP) systems that involve frequent data modification and retrieval.
Learn more about Relational models from the given link
https://brainly.com/question/28258035
#SPJ11
1. Why does the distance formula contain both x and y
coordinates? 2. Can you use the distance formula for horizontal and
vertical segments? 3. If you had horizontal/vertical segments,
which formula w
Explanation of why the distance formula contains both x and y coordinates:The distance formula is a formula used to calculate the distance between two points, given their coordinates on a Cartesian plane. It contains both x and y coordinates because the distance between two points is the length of the straight line connecting them, and this length can be determined by using the Pythagorean theorem. In order to use the Pythagorean theorem, we need to know the lengths of the sides of a right triangle, which are represented by the x and y coordinates of the two points. Therefore, the distance formula contains both x and y coordinates.
Can you use the distance formula for horizontal and vertical segments?Yes, you can use the distance formula for horizontal and vertical segments. In fact, the distance formula is commonly used to find the distance between two points on a horizontal or vertical line. When the two points have the same y-coordinate, they are on a horizontal line, and when they have the same x-coordinate, they are on a vertical line. In these cases, the distance between the two points is simply the absolute value of the difference between their x-coordinates or y-coordinates, respectively.
If you had horizontal/vertical segments, you would not need to use the distance formula. Instead, you could simply calculate the distance between the two points by finding the absolute value of the difference between their x-coordinates or y-coordinates, depending on whether they are on a horizontal or vertical line. However, if the two points are not on a horizontal or vertical line, you would need to use the distance formula to calculate the distance between them.
To know more about coordinates visit
https://brainly.com/question/32836021
#SPJ11
"
Evaluate the following definite integral using either Gamma or Beta
Functions only:
" (a) √√z e-√z dz (b) (ex)² (e²x + 1)¯³dx
The definite integral in part (a) cannot be evaluated using only Gamma or Beta functions.
To evaluate the integral ∫√√z e^(-√z) dz using only Gamma or Beta functions, we need to express the integrand in terms of such functions. However, the integrand in this case does not have a direct representation in terms of Gamma or Beta functions. Therefore, we cannot evaluate the integral using only those functions.
Part (b):
To evaluate the integral ∫(e^x)^2 (e^(2x) + 1)^(-3) dx using only Gamma or Beta functions, we can make a substitution: let u = e^x. Then, du = e^x dx, and the integral becomes ∫u^2 (u^2 + 1)^(-3) du. This can be rewritten as ∫u^2 (1 + u^(-2))^(-3) du.
Now, we can rewrite the integrand using the Beta function as (1/u^2)^(-3/2) * (1 + u^(-2))^(-3) = Beta(-3/2, -3) = Γ(-3/2)Γ(-3)/Γ(-6/2).
Using the properties of the Gamma function, we have Γ(-3/2) = -4√π/3, Γ(-3) = 2, and Γ(-6/2) = -4√π/15. Substituting these values back into the expression, we get (-4√π/3)(2)/(-4√π/15) = 10/3.
Therefore, the value of the integral ∫(e^x)^2 (e^(2x) + 1)^(-3) dx is 10/3.
For more questions like Integral click the link below:
https://brainly.com/question/22008756
#SPJ11
Suppose it is "All You Can Eat" Night at your favorite restaurant. Once you've paid \( \$ 69.95 \) for your meal, how do you determine how many helpings to consume?
The decision on how many helpings to consume during an "All You Can Eat" night is a personal one that depends on individual factors and preferences.
Determining how many helpings to consume during an "All You Can Eat" night at your favorite restaurant after paying $69.95 for your meal depends on several factors, including your appetite, preferences, and considerations of value. Here's how you can approach deciding the number of helpings to have:
1. Consider your appetite and capacity: Assess how hungry you are and how much food you can comfortably consume. Listen to your body and gauge your hunger level to determine a reasonable amount of food you can comfortably eat without overeating or feeling uncomfortable.
2. Pace yourself: Instead of devouring large portions in one go, pace yourself throughout the meal. Take breaks between servings, allowing your body time to process and gauge its level of satisfaction. Eating slowly and mindfully can help you better gauge your satiety levels and prevent overeating.
3. Explore variety: Take advantage of the "All You Can Eat" option to sample different dishes and flavors offered by the restaurant. Instead of focusing on consuming large quantities of a single item, try a variety of dishes to enjoy a diverse dining experience.
4. Prioritize your favorites: If there are specific dishes that you particularly enjoy or have been looking forward to, make sure to include them in your servings. Allocate a portion of your meal to savor your favorite items and balance it with trying other options.
5. Consider value for money: Since you've already paid a fixed amount for the "All You Can Eat" night, you may want to factor in the value you expect to receive from your payment. While you want to enjoy the food, be mindful of not overindulging simply for the sake of maximizing your perceived value. Strike a balance between savoring the offerings and ensuring you're satisfied with the overall dining experience.
6. Mindful self-awareness: Throughout your meal, stay attuned to your body's signals of fullness and satisfaction. Practice mindful eating by paying attention to how each serving makes you feel. Stop eating when you're comfortably satiated, even if there's still more food available.
Ultimately, the decision on how many helpings to consume during an "All You Can Eat" night is a personal one that depends on individual factors and preferences. Remember to prioritize enjoyment, listen to your body, and make conscious choices that align with your appetite and overall dining experience.
Learn more about factors here
https://brainly.com/question/25829061
#SPJ11
Evaluate. Be sure to check by differentiating. ∫e9x+8dx ∫e9x+8dx= (Type an exact answer. Use parentheses to clearly denote the argument of each function).
The anti-derivative of [tex]e^(9x + 8)[/tex] is found as: [tex](1/9) * e^(9x + 8) + C.[/tex]
To evaluate the integral and to check it by differentiating, we have;
[tex]∫e^(9x+8)dx[/tex]
Let the value of
u = (9x + 8),
then;
du/dx = 9dx,
and
dx = du/9∫[tex]e^(u) * (du/9)[/tex]
The integral becomes;
(1/9) ∫ [tex]e^(u) du = (1/9) * e^(u) + C[/tex]
Where C is the constant of integration, now replace back u and obtain;
[tex](1/9) * e^(9x + 8) + C[/tex]
Thus,
∫[tex]e^(9x+8)dx = (1/9) * e^(9x + 8) + C[/tex]
We have found that the anti-derivative of [tex]e^(9x + 8)[/tex] with respect to x is [tex](1/9) * e^(9x + 8) + C.[/tex]
Know more about the anti-derivative
https://brainly.com/question/21627352
#SPJ11
What is the perimeter of \( \triangle L M N \) ? Round to the nearest tenth. A. \( 19.4 \) units B. \( 22.4 \) units C. \( 25.4 \) units D. \( 30.0 \) units
The coordinates of the vertices of triangle L M N are given by L(1, 4), M(7, 4), and N(4, 1). The correct option is A. 19.4 units.
The perimeter of a triangle is the total distance around its exterior, given by the sum of the lengths of its sides. So, the perimeter of triangle L M N can be found by adding the lengths of the sides together.Perimeter of triangle L M N:LM + MN + NL = [(7 − 1)2 + (4 − 4)2]1/2 + [(4 − 7)2 + (1 − 4)2]1/2 + [(1 − 4)2 + (4 − 1)2]1/2= [36]1/2 + [18]1/2 + [18]1/2≈ 19.4 units.The correct option is A. 19.4 units.
Learn more about triangle
https://brainly.com/question/2773823
#SPJ11
The price-demand equation for hamburgers at Yaster's Burgers is
x+406 p = 2,950,
where p is the price of a hamburger in dollars and is the number of hamburgers demanded at that price. Use this information to answer questions below.
If the current price of a hamburger at Yaster's Burgers is $3.33, will a 2% price increase cause revenue to
1. increase
2. decrease?
If the current price of a hamburger at Yaster's Burgers is $4.94, will a 4% price increase cause revenue to
1. increase
2. decrease?
1. a 2% price increase will cause revenue to decrease. Hence the correct option is 2.
2. a 4% price increase will cause revenue to increase. Hence the correct option is 1.
1.The price-demand equation for hamburgers at Yaster's Burgers is x + 406p = 2950, where p is the price of a hamburger in dollars and x is the number of hamburgers demanded at that price.
We need to find out if a 2% price increase will cause revenue to increase or decrease when the current price of a hamburger is $3.33.
Let us substitute p = 3.33 in the above equation,
x + 406(3.33) = 2950x + 1340.98 = 2950x = 2950 - 1340.98x = 1609.02 / x = 1609.02
We know that the current price of a hamburger is $3.33, thus x = 1609.02/3.33 ≈ 483.07
Let us increase the price by 2%, then new price = 3.33 + (2/100) × 3.33 = 3.40
New value of x = 1609.02/3.40 ≈ 473.24
Revenue = Price × Quantity demanded at that price (p * x)
Revenue before increase = 3.33 * 483.07 ≈ $1610.89
Revenue after 2% increase in price = 3.40 * 473.24 ≈ $1609.82
Therefore, a 2% price increase will cause revenue to decrease.
Hence the correct option is 2.
2. Let us again use the price-demand equation for hamburgers at Yaster's Burgers, x + 406p = 2950.
Let us substitute p = 4.94 in the above equation,
x + 406(4.94) = 2950
x + 1992.64 = 2950
x = 2950 - 1992.64
x = 957.36
We know that the current price of a hamburger is $4.94, thus x = 957.36/4.94 ≈ 193.91
Let us increase the price by 4%, then new price = 4.94 + (4/100) × 4.94 = 5.13
New value of x = 957.36/5.13 ≈ 186.71
Revenue before increase = 4.94 * 193.91 ≈ $954.96
Revenue after 4% increase in price = 5.13 * 186.71 ≈ $958.46
Therefore, a 4% price increase will cause revenue to increase.
Hence the correct option is 1.
To know more about price-demand equation, visit:
https://brainly.com/question/32089845
#SPJ11
a)Use the Product Rule to find the derivative of f.
f(x)=x^3csc(x)
f′(x)=______________
b)Find an equation of the tangent line to y=cos(x)+4sin(x) at x=π/3
y= ____________
To find an equation of the tangent line to the given function y = cos(x) + 4sin(x) at x = π/3, we can first find the slope of the tangent line using the derivative of the function.
a) Using the Product Rule to find the derivative of f(x) = x³ csc(x):
f'(x) = (x³)'(csc(x)) + (x³)(csc(x))'
Simplifying the expression:
f'(x) = 3x²csc(x) - x³csc(x)cot(x)
b) Finding an equation of the tangent line to y = cos(x) + 4sin(x) at x = π/3:
y' = -sin(x) + 4cos(x)
At x = π/3, we have:
y' = -sin(π/3) + 4cos(π/3) = -√3/2 + 4/2 = 1/2
Using the point-slope form of a line, we can write the equation of the tangent line:
y - (1/2 + 2√3) = (1/2)(x - π/3)
Simplifying the above equation, we can get the equation of the tangent line in slope-intercept form:
y = (1/2)x + (√3 - 1)/2
To know more about tangent line visit :
https://brainly.com/question/23416900
#SPJ11
Given an acceleration vector, initial velocity ⟨u0,v0,w0⟩, and initial position ⟨x0,y0z0⟩, find the velocity and position vectors for t≥0
a(t)=⟨7t,e−t,11⟩,⟨u0,v0,w0⟩=⟨0,0,2⟩,⟨x0,y0z0⟩=⟨3,0,0⟩
What is the velocity vector?
v(t)=
What is the position vector?
r(t)=
The velocity vector is given by v(t)=⟨7/2t² + C1, -e⁻ᵗ + C2, 11t + C3⟩ and the position vector is given by r(t) = ⟨7/6t³ + C1t + C4, e⁻ᵗ + C2t + C5, 11/2t² + C3t + C6⟩
The given information is: a(t)=⟨7t,e−t,11⟩⟨u0,v0,w0⟩=⟨0,0,2⟩⟨x0,y0z0⟩=⟨3,0,0⟩From the given acceleration vector a(t), we need to find the velocity vector and position vector for t ≥ 0. The velocity vector is the integral of acceleration, and the position vector is the integral of the velocity vector. We can get the velocity vector v(t) by integrating a(t) as follows: v(t) = ∫a(t)dt = ⟨(7/2)t² + C1, -e⁻ᵗ + C2, (11)t + C3⟩, where C1, C2 and C3 are constants of integration that we need to find by using the initial conditions. Using the given initial velocity ⟨u0,v0,w0⟩=⟨0,0,2⟩, we get: C1 = u0 = 0C2 = v0 = 0C3 = w0 = 2Therefore, the velocity vector is:v(t) = ⟨(7/2)t², -e⁻ᵗ, (11)t + 2⟩The position vector r(t) can be obtained by integrating the velocity vector v(t) as follows: r(t) = ∫v(t)dt = ⟨(7/6)t³ + C1t + C4, e⁻ᵗ + C2t + C5, (11/2)t² + C3t + C6⟩, where C4, C5 and C6 are constants of integration that we need to find by using the initial conditions. Using the given initial position ⟨x0,y0z0⟩=⟨3,0,0⟩, we get:C4 = x0 = 3C5 = y0 = 0C6 = z0 = 0Therefore, the position vector is:r(t) = ⟨(7/6)t³ + C1t + 3, e⁻ᵗ + C2t, (11/2)t² + 2t⟩Hence, the velocity vector is given by v(t) = ⟨7/2t², -e⁻ᵗ, 11t + 2⟩ and the position vector is given by r(t) = ⟨7/6t³ + C1t + 3, e⁻ᵗ + C2t, 11/2t² + 2t⟩, where C1, C2 are constants of integration.
Learn more about acceleration vector here:
https://brainly.com/question/33322786
#SPJ11
Consider the function f(x) = 12x^5 + 60x^4 - 100x^3 + 4.
f(x) has inflection points at (reading from left to right) x = D, E, and F
where D is _____
and E is ___
and F is ____
For each of the following intervals, tell whether f(x) is concave up or concave down.
(− [infinity], D): ______
(D, E): ______
(E, F): ______
(F, [infinity]): ______
D is the left inflection point E is the middle inflection pointF is the right inflection point(− [infinity], D): Concave down(D, E): Concave up(E, F): Concave down(F, [infinity]): Concave up
Consider the function f(x) = 12x^5 + 60x^4 - 100x^3 + 4.
f(x) has inflection points at (reading from left to right) x = D, E, and F, where D is ____ and E is ____ and F is ____.The given function is f(x) = 12x5 + 60x4 - 100x3 + 4.
The first derivative of the given function can be found as below:
f(x) = 12x5 + 60x4 - 100x3 + 4f'(x) = 60x4 + 240x3 - 300x2
The second derivative of the given function can be found as below:
f(x) = 12x5 + 60x4 - 100x3 + 4f''(x) = 240x3 + 720x2 - 600x
We can set f''(x) = 0 to find the inflection points.
x = D : f''(D) = 240D3 + 720D2 - 600D = 0x =
E : f''(E) = 240E3 + 720E2 - 600E = 0x = F :
f''(F) = 240F3 + 720F2 - 600F = 0For each of the following intervals, tell whether f(x) is concave up or concave down.
(− [infinity], D): f''(x) < 0 hence f(x) is concave down(D, E):
f''(x) > 0 hence f(x) is concave up(E, F):
f''(x) < 0 hence f(x) is concave down(F, [infinity]):
f''(x) > 0 hence f(x) is concave up.
To know more about inflection point visit:-
https://brainly.com/question/30767426
#SPJ11
For a geometric sequence with first term =2, common ratio =−2, find the 9 th term. A. −512 B. 512 C. −1024 D. 1024 A B C D
The first term of the geometric sequence is 2.
The common ratio of the geometric sequence is -2.
Therefore, the nth term of the geometric sequence is given by the formula: an = [tex]a1(r)n-1[/tex]
Where, an is the nth term of the geometric sequence, a1 is the first term of the geometric sequence, r is the common ratio of the geometric sequence, and n is the position of the term to be found in the sequence.
Given that the first term (a1) = 2 and common ratio (r) = -2.
The 9th term (a9) of the geometric sequence is given by:[tex]a9 = a1(r)9-1 = 2(-2)8 = -512[/tex]
Therefore, the answer is option A. -512.
To know more about the word position visits :
https://brainly.com/question/31742970
#SPJ11
The first term is 2 and the common ratio is −2. This implies that the terms in this geometric sequence will alternate between negative and positive values. The ratio of any two consecutive terms is −2 (as it is a geometric sequence), which means that to get from one term to the next, you must multiply the previous term by −2. We need to find the ninth term in this geometric sequence.
We will employ the formula to calculate any term in a geometric sequence: an = a1 × rn-1 where an is the nth term in the sequence a1 is the first termr is the common ratio We have, a1 = 2 and r = −2. We need to find the 9th term, i.e., a9. an = a1 × rn-1= 2 × (−2)9−1= 2 × (−2)8= 2 × 256= 512 Therefore, the 9th term of this geometric sequence is 512. Hence, the answer is option B) 512.
To know more about ratio, visit:
https://brainly.com/question/12024093
#SPJ11
A. A pentagon, \( A B C D E \), represents a plot of land and has the following vertices: \( A(-1,0), B(3,1), C(3,4), D(0,5) \) and \( E(-3,3) \). If pentagon \( A B C D E \) is reflected in the \( x
When the pentagon ABCDE is reflected in the x-axis, its vertices change their positions. The reflected vertices can be obtained by negating the y-coordinates of the original vertices. The new coordinates of the reflected pentagon are A'(-1,0), B'(3,-1), C'(3,-4), D'(0,-5), and E'(-3,-3).
To reflect a figure in the x-axis, we need to invert the y-coordinates of its vertices while keeping the x-coordinates unchanged. In this case, the original coordinates of the pentagon ABCDE are given as follows: A(-1,0), B(3,1), C(3,4), D(0,5), and E(-3,3).
To find the reflected coordinates, we simply negate the y-coordinates of each vertex. Thus, the reflected coordinates of the pentagon are: A'(-1,0), B'(3,-1), C'(3,-4), D'(0,-5), and E'(-3,-3).
For example, the y-coordinate of vertex A is 0, and when reflected, it becomes -0, which is still 0. Similarly, the y-coordinate of vertex B is 1, and when reflected, it becomes -1. This process is repeated for all the vertices of the pentagon to obtain the reflected coordinates.
Therefore, after reflecting the pentagon ABCDE in the x-axis, its new vertices are A'(-1,0), B'(3,-1), C'(3,-4), D'(0,-5), and E'(-3,-3).
Learn more vertices about click here: brainly.com/question/29154919
#SPJ11
- Mi tía Juana tiene 3/5 de una bolsa de dulces que le sobró de una fiesta y los quiere regalar a mi prima y a mí, ¿qué parte del total de la bolsa nos toca a cada una?
Si tu tía Juana tiene 3/5 de una bolsa de dulces y los quiere repartir entre tú y tu prima, podemos dividir equitativamente la bolsa en partes iguales para cada una.
Para calcular la parte que les corresponde a cada una, dividimos 3/5 entre 2, ya que son dos personas.
3/5 ÷ 2 = 3/5 x 1/2 = 3/10
Entonces, a cada una les corresponde 3/10 de la bolsa de dulces.
Learn more about equitativamente here;
https://brainly.com/question/18045886
#SPJ11
help solve
Q5-) Assume you have Structuring element with the original at the center and input image as shown. Find the erosion of the image and then find the dilation of the eroded image, what this process calle
The process of finding the erosion of an image and then finding the dilation of the eroded image is called opening. The erosion process removes pixels from the image's boundary that match the structuring element.
The opening process can help in removing small bright spots in the image and closing small holes while preserving the object's shape. The given image is shown below: Structuring element with original at center and input image. Find the erosion of the image by sliding the structuring element over the image and keeping only the pixels in the original image where all the ones in the structuring element match.
The process of finding the erosion of an image and then finding the dilation of the eroded image is called opening. The erosion process removes pixels from the image's boundary that match the structuring element, whereas dilation adds pixels to the image's boundary that match the structuring element. The opening process can help in removing small bright spots in the image and closing small holes while preserving the object's shape.
To know more about erosion visit:
https://brainly.com/question/30587260
#SPJ11
Use the given information to find the left- and right-hand Riemann sums for the following function. If necessary,
round your answers to five decimal places. f(z) = + + 18 5 a = - 4, b - 5, and n - 11
The function f(z) contains square roots and fractional terms, the exact numerical values may be more complicated to calculate without a calculator.
To find the left- and right-hand Riemann sums for the given function f(z) = √z + z^2 + 18/5 with the interval [a, b] = [-4, 5] and the number of subintervals n = 11, we need to calculate the width of each subinterval (∆x) and evaluate the function at the left and right endpoints of each subinterval.
The width of each subinterval is given by:
∆x = (b - a) / n
∆x = (5 - (-4)) / 11
∆x = 9 / 11
Now, we can calculate the left and right Riemann sums using the given function and subintervals:
Left-hand Riemann sum:
For each subinterval, we evaluate the function at the left endpoint and multiply it by the width (∆x).
LHS = ∆x * (f(a) + f(a + ∆x) + f(a + 2∆x) + ... + f(b - ∆x))
LHS = (9 / 11) * (√(-4) + (-4)^2 + 18/5 + √(-4 + 9/11) + (-4 + 9/11)^2 + 18/5 + ... + √(5 - 9/11) + (5 - 9/11)^2 + 18/5)
Calculate the values inside the square roots and perform the arithmetic to obtain the numerical value.
Right-hand Riemann sum:
For each subinterval, we evaluate the function at the right endpoint and multiply it by the width (∆x).
RHS = ∆x * (f(a + ∆x) + f(a + 2∆x) + f(a + 3∆x) + ... + f(b))
RHS = (9 / 11) * (√(-4 + 9/11) + (-4 + 9/11)^2 + 18/5 + √(-4 + 2(9/11)) + (-4 + 2(9/11))^2 + 18/5 + ... + √(5) + (5)^2 + 18/5)
Again, calculate the values inside the square roots and perform the arithmetic to obtain the numerical value.
Learn more about numerical values here
https://brainly.com/question/31533758
#SPJ11
Problem 2. Let x(t) and y(t) be jointly WSS random processes. (a) Show that the cross-correlation function satisfies Ray(T) = R(-7). (b) Is the cross-power spectral density guaranteed to be real-valued? Explain your reasoning. (c) Let r(t) be a WSS process at the input of an LTI filter, with the impulse response h(t), whose output is denoted as y(t). What is the condition on h(t) for the cross-power spectral density of r(t) and y(t) to be real-valued?
The cross-correlation function satisfies Ray(T) = R(-7). (b) The cross-power spectral density may or may not be guaranteed to be real-valued, depending on the properties of the jointly WSS random processes. (c) The condition on h(t) for the cross-power spectral density of r(t) and y(t) to be real-valued is that the impulse response h(t) must be a real-valued function.
What condition must be satisfied for the cross-power spectral density of jointly WSS random processes to be real-valued?(a) The cross-correlation function between two jointly wide-sense stationary (WSS) random processes, x(t) and y(t), is denoted as Ray(T), where T represents the time lag. In this case, it is stated that Ray(T) is equal to R(-7), indicating that the cross-correlation function is symmetric around a time lag of -7.
(b) The cross-power spectral density (CPSD) is the Fourier transform of the cross-correlation function. Whether the CPSD is guaranteed to be real-valued depends on the properties of the jointly WSS random processes x(t) and y(t). In general, if the processes are real-valued, the CPSD will also be real-valued. However, if the processes have complex-valued components, the CPSD may have imaginary parts.
(c) Consider a WSS process r(t) at the input of a linear time-invariant (LTI) filter with impulse response h(t), and let the output be denoted as y(t). The condition for the cross-power spectral density of r(t) and y(t) to be real-valued is that the impulse response h(t) must be a real-valued function. This condition ensures that the LTI system preserves the symmetry properties of the input processes, leading to a real-valued cross-power spectral density.
In summary, the cross-correlation function between jointly WSS random processes satisfies the symmetry property Ray(T) = R(-7). The cross-power spectral density may or may not be real-valued, depending on the nature of the input processes. To ensure a real-valued cross-power spectral density between a WSS input process and the output of an LTI filter, the impulse response of the filter must be real-valued.
Learn more about Cross-Correlation
brainly.com/question/21426493
#SPJ11
For this differential equation + 4x = 8 dt dx and x(0)=0. Solve for solution x and answer the following questions. a. What is the steady state (xf) value? b. The natural response xn of the equation is? c. What is the value of x(t) at t=0? d. What is the value of x(t) at t=infinity?
Given differential equation is `dx/dt + 4x = 8` with `x(0) = 0`.a) Steady-state (xf) value:Steady-state value is the value of x as t tends to infinity.`dx/dt + 4x = 8`Separating variables: `dx/4x - dt = -2dt`Integrating both sides: `1/4 ln|x| - 2t = C`where C is the constant of integration.
At steady-state, `dx/dt = 0`. Therefore, `x = 2`.So, `ln|x| = 8` and `x = ±e^8/4` ≈ `18.2`b) Natural response (xn) of the equation:The natural response is the response of the differential equation when the input (forcing function) is zero. In other words, the input of the system is only the initial conditions. Here, the input is zero; therefore, the differential equation reduces to: `dx/dt + 4x = 0`.
The solution of this differential equation is:`x(t) = Ae^(-4t)`where A is the constant of integration. The initial condition `x(0) = 0` gives `A = 0`. Therefore, `x(t) = 0` and `xn(t) = 0`.c) Value of x(t) at `t = 0`:Given, `x(0) = 0`. Therefore, the value of `x(t)` at `t = 0` is `0`.d) Value of x(t) at `t = infinity`:At steady-state, `x = 18.2`. Therefore, as `t` tends to infinity, `x(t)` tends to `18.2`.
To know more about equation visit:
https://brainly.com/question/29657988
#SPJ11
A gas, oil and gasoline product company. I know knows that to produce a unit of gas requires 1/5 of the same 2/5 of oil and 1/5 of gasoline for producing a unit of oil requires 2/5 gas and 1/5 oil. To produce a unit of gasoline use a gas unit and an oil unit finally if you have a market demand of 100 units of each product, determine a gross production of each industry to meet your market.
solve it by the Gauss-Jordan method
To determine the gross production of each industry to meet the market demand, we can set up a system of linear equations based on the given information and solve it using the Gauss-Jordan method.
Let's represent the gas production, oil production, and gasoline production as variables G, O, and A, respectively.
From the information provided, we can write the following equations:
1/5G + 2/5O + 1/5A = 100 (equation 1)
2/5G + 1/5O = 100 (equation 2)
1/5G + 1/5O = 100 (equation 3)
We can rearrange equation 2 to get G in terms of O: G = 250 - O/5. Then substitute this expression into equations 1 and 3. This will eliminate G, leaving only O and A in the equations.
After performing the necessary operations using the Gauss-Jordan method, we can find the values of O and A. The resulting values will represent the gross production of oil and gasoline, respectively, needed to meet the market demand.
To know more about Gauss-Jordan click here: brainly.com/question/30767485
#SPJ11
Is the following decay allowed? Explain all your reasoning and consider all conservation laws and rules to receive full credit. \[ \Sigma^{+} \rightarrow \Lambda^{0}+\pi^{+} \]
The decay Σ+→Λ0+�+Σ+→Λ0+π+is allowed based on conservation laws and rules.
Here's the reasoning:
Conservation of charge: The total charge on the left-hand side (Σ+Σ+) is +1, and on the right-hand side (Λ0+�+Λ0+π+) is also +1. Therefore, the decay is consistent with the conservation of charge.
Conservation of baryon number: The total baryon number on the left-hand side is +1 (since Σ+Σ+has baryon number +1), and on the right-hand side, the sum of the baryon numbers ofΛ0Λ0and�+π+is also +1.
Hence, baryon number is conserved in this decay.
Conservation of strangeness: The strangeness quantum number is conserved separately for each particle in the decay. The strangeness of
Σ+Σ+is 0, whileΛ0Λ0has strangeness -1 and�+π+has strangeness 0. The sum of the strangeness values on the right-hand side is -1 + 0 = -1, which matches the strangeness of the Σ+Σ+on the left-hand side. Therefore, strangeness is also conserved.
Based on the conservation laws of charge, baryon number, and strangeness, we can conclude that the decay
Σ+→Λ0+�+Σ+→Λ0+π+is allowed.
To know more about decay, visit
https://brainly.com/question/33268082
#SPJ11
When a wing stalls: O Flow separates from the top and bottom surfaces of the wing O Aircraft wings are designed never to stall O The lift is reduced as the air density over the top surface is less than the lower surface O Flow separates from the top surface of the wing O The lift stops acting upwards and the plane descends
When a wing stalls, the lift is reduced as the air density over the top surface is less than the lower surface. The flow separates from the top surface of the wing.
The lift stops acting upwards and the plane descends. This is due to the fact that the angle of attack (AOA) is too high and the wing is no longer able to generate enough lift. The wing's airflow separates from the upper surface, causing the wing to lose lift and drag to increase. This condition is known as a stall.
Aircraft wings are designed to avoid stalling, but pilots must be aware of the conditions that can lead to a stall. The wings' AOA is regulated by adjusting the control surfaces, such as flaps, to keep the wing's AOA within a safe range. Pilots are trained to keep their speed high enough to prevent stalling during takeoff and landing.
In conclusion, when a wing stalls, the lift is reduced as the air density over the top surface is less than the lower surface. The flow separates from the top surface of the wing, causing the lift to stop acting upwards and the plane to descend. This is why it is important for pilots to be trained in stall prevention techniques and to avoid situations that can lead to a stall.
To know more about plane visit:
https://brainly.com/question/18681619
#SPJ11
b) 8% of the light bulbs manufactured on an assembly line are defective.
(i) Calculate the probability that the second defective light bulb will be found on the tenth inspection if the light bulbs are inspected one by one.
(Ii) In a random sample of n light bulbs, the probability to get at least one defective light bulb is greater than 0.9. Calculate the smallest possible value of n.
(iii) A random sample of 1800 light bulbs is taken. Calculate the probability that there are at least 152 are defective.
The probability that at least 152 out of 1800 light bulbs are defective is approximately 0.7664 or 76.64%.
(i) To calculate the probability that the second defective light bulb will be found on the tenth inspection, we need to consider the binomial distribution.
The probability of finding a defective light bulb on any given inspection is 8%, which means the probability of not finding a defective bulb is 92% (1 - 0.08).
To find the probability of finding the second defective bulb on the tenth inspection, we need to have 9 successful (non-defective) inspections followed by a successful (defective) inspection on the tenth attempt.
Using the binomial distribution formula, the probability is given by:
P(X = 9) * P(X = 1) = C(10, 9) * (0.92)^9 * (0.08)^1 = 10 * 0.92^9 * 0.08
Calculating this expression, we find:
P(second defective on tenth inspection) ≈ 0.1959 or 19.59%
(ii) In a random sample of n light bulbs, the probability of at least one defective light bulb is given by the complement of the probability of having all non-defective light bulbs.
The probability of a single light bulb being non-defective is 92% (1 - 0.08). Therefore, the probability of all n light bulbs being non-defective is [tex](0.92)^n.[/tex]
We want the probability of at least one defective light bulb, which is the complement of all non-defective light bulbs:
P(at least one defective) = 1 - P(all non-defective)
P(at least one defective) = [tex]1 - (0.92)^n[/tex]
Given that the probability of at least one defective light bulb is greater than 0.9, we have:
[tex]1 - (0.92)^n[/tex]> 0.9
To solve this inequality, we can take the logarithm of both sides:
[tex]log(1 - (0.92)^n) > log(0.9)[/tex]
Rearranging the inequality and solving for n, we find:
n > log(0.1) / log(0.92)
n > 21.854
Therefore, the smallest possible value of n is 22.
(iii) To calculate the probability that at least 152 out of 1800 light bulbs are defective, we can use the binomial distribution.
The probability of a single light bulb being defective is 8% (0.08). Therefore, the probability of a single light bulb being non-defective is 92% (1 - 0.08).
Using the binomial distribution formula, the probability of having at least 152 defective bulbs out of 1800 is given by:
P(X ≥ 152) = P(X = 152) + P(X = 153) + ... + P(X = 1800)
Calculating this probability involves summing the probabilities for each individual value of X from 152 to 1800. However, this calculation is computationally intensive.
Alternatively, we can use a normal approximation to the binomial distribution for large sample sizes. In this case, both the number of trials (n = 1800) and the probability of success (p = 0.08) are sufficiently large.
Using the normal approximation, we can calculate the mean and standard deviation of the binomial distribution:
mean = n * p = 1800 * 0.08 = 144
standard deviation = sqrt(n * p * (1 - p)) = sqrt(1800 * 0.08 * 0.92) ≈ 10.439
To find the probability of having at least 152 defective bulbs, we can calculate the z-score corresponding to X = 151.5 (using continuity correction):
z = (151.5 - mean) / standard deviation = (151.5 - 144) / 10.439 ≈ 0.721
Using a standard normal distribution table or calculator, we find that the probability corresponding to a z-score of 0.721 is approximately 0.7664.
Therefore, the probability that at least 152 out of 1800 light bulbs are defective is approximately 0.7664 or 76.64%.
Learn more about statistics here:
https://brainly.com/question/30915447
#SPJ11
