Answer:
There was an improvement in accuracy. There was no change in precision.
Explanation:
The average mass after recalibration is closer to the mass of the standard, so the recalibration improved the accuracy (the measurement is closer to an accepted 'true' value).
The standard deviation did not change, so the precision (or how disperse the measurements are) was not affected.
383.2 K to degrees Celsius
Answer: 110.05
Explanation: i dont know i looked it up
What is a common effect of warm ocean currents on nearby coastlines?
A. Low wind speeds
B. Lower temperatures
C. Changing wind directions
D. Increased clouds and precipitation
When air cools, water molecules lose energy and
or change into liquid form.
which statement is true about both groundwater and surface water?
A. Rainwater forms both the groundwater and the surface water
B. The water levels of both the groundwater and the surface water stay stable
C. Both the groundwater and the surface water are purified as they soak through the soil layers
D. The groundwater and the surface water together form a drainage basin
The statement which is true about both groundwater and surface water is that the groundwater and the surface water together form a drainage basin.
What is ground water?
Ground water is the type of water which is present below the surface of rock and between spaces in soil pores .Thirty percent of the available fresh water is present in the form of groundwater.
Groundwater is discharged from the surface naturally in the form of springs and seeps and can also exist in the form of oases or wetlands.It is used for various purposes like for agriculture, municipal and industrial uses. They are used by constructing wells .
The study of movement and distribution of ground water is called hydrogeology or even groundwater hydrology.It is a cheaper source of water and is less prone to pollution as compared to surface water.
Learn more about ground water,here:
https://brainly.com/question/14869307
#SPJ2
Suppose of nickel(II) bromide is dissolved in of a aqueous solution of potassium carbonate. Calculate the final molarity of nickel(II) cation in the solution. You can assume the volume of the solution doesn't change when the nickel(II) bromide is dissolved in it. Round your answer to significant digits.
The question is incomplete, the complete question is;
Suppose 1.87g of nickel(II) bromide is dissolved in 200.mL of a 52.0mM aqueous solution of potassium carbonate. Calculate the final molarity of nickel(II) cation in the solution. You can assume the volume of the solution doesn't change when the nickel(II) bromide is dissolved in it. Be sure your answer has the correct number of significant digits. The answer is needed in M.
Answer:
0.0428 M
Explanation:
The equation of the reaction is;
NiBr2 + K2CO3 → NiCO3 + 2KBr
Number of moles of NiBr2 = mass/molar mass = 1.87 g/218.53 g/mol =
8.557 * 10^-3 moles
Now, we know that the Ni^2+ comes from the NiBr2. Also, the concentration of Ni^2+ in NiBr2 = concentration of Ni^2+ in NiCO3
So,
Concentration of Ni^2+ = 8.557 * 10^-3 moles/0.2 L = 0.0428 M
A student reacts 13 moles of iron with 21 moles of oxygen according to the following equation:
4Fe(s) + 3O2(g) +2Fe2O3(s)
How many moles of iron(III) oxide will the reaction produce?
a
34 moles
b
13 moles
c
6.5 moles
d
44 moles
Answer:
Explanation:
C
The limiting reactant in this reaction is Fe. 4 moles of Fe gives 2 moles of ferric oxide. Hence, 13 moles of Fe will give 6.5 moles of iron (iii)oxide.
What is limiting reactant ?The reactant which is not sufficient in amount determines the yield of the reaction and it is called the limiting reactant of the reaction.
In the given reaction, 4 moles of iron reacts with 3 moles of oxygen to give 2 moles of iron oxide.
given , no.of moles of oxygen gas present in the sample = 21 moles
no.of moles of Fe = 13 moles.
Here, 28 moles of Fe is needed to react with 21 moles of oxygen. Hence, Fe is the limiting reactant.
4 moles of Fe gives 2 moles of iron (III)oxide. Hence, number of moles of the product , formed from 13 moles of Fe is calculated as follows:
(13 moles ×2 moles)/4moles = 6.5m moles
Therefore, 6.5 moles of iron (III)oxide is formed from 13 moles of Fe.
Find more on limiting reactant :
https://brainly.com/question/2948214
#SPJ6
Which of the following forces would take the longest amount of time to change the surface of the Earth?
A. volcano
B. earthquake
C. tsunami
D. seafloor spreading
HELPP
Answer: D
Explanation:
Cause If you head to the middle of the ocean and dive down, down, down to where the Earth's plates meet, you might find an undersea mountain split by a deep trench. It's called a mid-ocean ridge. Up through such trenches, brand-new molten rock is bubbling. That's the newest rock on Earth! How does the ocean floor make room for all that new rock? Simply by pushing the old rock aside. In fact, the ocean floor is actually spreading right at this minute, out away from the deep trenches where new rock is being formed. The oldest rock can be found farthest away from the trenches, right up near the continents. It's all part of a process called seafloor spreading. It's been going on for millions of years (at the rate of a few centimeters per year), but scientists are just now getting to know more about it. In fact, because evidence of seafloor spreading was first discovered in the 1940s and 50s, your great-grandparents may have never heard of it!
g A and B are both non-volatile molecular compounds. Substance A has a greater molar mass than substance B. If 50 g of substance A are dissolved in 250 g of water in one beaker, and 50 g of substance B are dissolved in 250 g of water in another beaker, then which ONE statement below will be true? A) the vapor pressure of solution A will be lower than the vapor pressure of solution B. B) the solution of A will freeze at a lower temperature than the solution of B. C) the two solutions will have the same vapor pressure. D) the boiling point of solution A will be lower than the boiling point of solution B. E) the solution of A will have a higher osmotic pressure than the solution of B.
Answer:
The correct answer is - option D. the boiling point of solution A will be lower than the boiling point of solution B
Explanation:
Colligative properties such as a decrease in the freezing point of the solution, increase in the boiling point of substance, decrease in Lowering of vapor pressure, and other properties depend upon the number of molecules only.
In the given solution the equal amount of two solutions are mixed that is 50 grams however due to the difference in the molecular mass so the atoms present in both solution A and B will be different. It is known that the number of atoms of a substance is inversely proportional to the molecular mass of the particular substance.
As it is given that Solution B has a low molecular mass which means it has a high number of atoms that means its boiling point will be higher than solution A.
How many mols of NaOH are there in 10 grams of NaOH? *
Answer:
0.25 moles
Explanation:
The molar mass of NaOH is 40 g/mol.
[tex]\frac{10g}{40g/mol}[/tex] This equals 0.25 moles
David went shopping with his mom for house renovations supplies. They were looking for materials that would conduct electricity. Which material should they buy?
Copper
Glass
Plastic
Wood
Answer:
this will copper this is correct answer
Question asked: David went shopping with his mom for house renovations supplies. They were looking for materials that would conduct electricity. Which material should they buy?
Answer: Copper
Explanation: Copper would be the right answer because that's the only material that would conduct electricity.
--------------------------------------------------------------------------------------------
I hope this helps!
Select the BEST definition for entropy. Select one: a. stored energy in a substance that is exchanged as heat during a reaction (at constant pressure). b. tendency for a substance to achieve maximum disorder (i.e., randomly distribute). c. state of balance between a forward and a reverse reaction. d. ability of an atom to attract electrons for bonding.
Answer:
b. tendency for a substance to achieve maximum disorder (i.e., randomly distribute).
Explanation:
Entropy can be defined as the tendency for a substance to achieve maximum disorder (i.e., randomly distribute).
This ultimately implies that, entropy is a thermodynamic quantity that measures the degree of maximum order or randomness of a system.
The S.I unit used for the measurement of the degree of maximum order or randomness of a system is Joules per Kelvin (JK¯¹). An example of entropy is the mixing of ideal gases.
What are the different elements that make up a molecule of glucose?
Answer:
Glucose has a chemical formula of: C6H12O6 That means glucose is made of 6 carbon atoms, 12 hydrogen atoms and 6 oxygen atoms. You will be building one type of sugar called glucose.
Explanation:
How many grams are in 0.00321 mol NI
Solution
The mole is the number of particles contained in a substance
1 mol = 6.02.10²³
Moles can also be determined from the amount of substance mass and its molar mass
mol = mass : molar mass
mass = mol x molar mass
Molar mass = 58,6934 g/mol
Input the value :
mass = 0.0321 x 58,6934 g/mol
mass = 1.884 g
help me out pleaseeee
Answer:
Help with what?
Calculate the molality of an ethylene glycol (C2H6O2) soltuion, that has a molarity of 2.07 M. The density of the solution is 1.02 g/mL. Only enter the numerical value with 3 significant figures in the answer box below. Do NOT type in the unit (m).
Answer:
2.03
Explanation:
Let's assume we have 1 L of the solution:
There would be 2.07 ethylene glycol moles.The solution would weigh (1000 mL * 1.02 g/mL) = 1020 g.With that information we can calculate the molality:
molality = moles of solute / kg of solventmolality = 2.07 moles / (1020 ÷ 1000) = 2.03 mKeep in mind that this is only an estimate, as we used the kg of the solution and not of the solvent.
The molality of an ethylene glycol solution is 2.03 kg.
What is molality?The moles of solute divided by the mass of solvent in kilograms is known as the molality of a solution.
Calculation of molality:
Given that, molarity is 2.07 M
Density is 1.02 g/ml
Step 1: To convert the litre into grams, multiply the quantity by 1000
The weight of the solution is [tex]\bold{1.02 \;g/ml\; \times 1000 = 1020 g}[/tex]
Now, molality = moles of solute is divided by mass of solvent in kilograms.
[tex]\bold{Molality = 2.07 \times \dfrac{1020}{1000} = 2.03\; kg}[/tex]
Thus, the molality of the solution is 2.03 kg
Learn more about molality, here:
https://brainly.com/question/4580605
molality = moles of solute / kg of solvent
molality = 2.07 moles / (1020 ÷ 1000) = 2.03 m
Keep in mind that this is only an estimate, as we used the kg of the solution and not of the solvent.
What is the difference between a proton, neutron, and electron?
Answer:
proton :
a particale or atom containing a postive charge
nuutron
a particale or atom that contains a negative charge
electron :
a particale or atom with a negative chrage.
Explanation:
proton:
a stable subatomic particle occurring in all atomic nuclei, with a positive electric charge equal in magnitude to that of an electron, but of opposite sign.
nuetron:
a subatomic particle of about the same mass as a proton but without an electric charge, present in all atomic nuclei except those of ordinary hydrogen.
elcetron:
a stable subatomic particle with a charge of negative electricity, found in all atoms and acting as the primary carrier of electricity in solids.
6. Describe nuclear fusion reactions as they
occur in the sun.
Answer:
i wish i know
Explanation:
i wish i know
A 40.5 g sample of aluminum is cooled 7.5°C. The specific heat capacity of aluminum is
0.900 J/g°C. What is the energy change for this sample?
In chemical reactions, a product is
Select one:
any substance that is made from the least number of atoms
any substance to the right of the arrow
any substance that is made of the greatest number of atoms
ubstance that s to the left of the arrow
a certain kind of pea plant has an allele for tall and an allele for short but its overall phenotype is tall.
Answer:
Tt
Explanation:
T= Dominant tall
t= non-dominant short.
Dominant always shows over non-dominant.
Which color of light does a green object absorb?
Answer:
Magenta.
Explanation:
Color absorption is a process that occurs when a light wave strikes an object. When a light wave strikes an object it either absorbs color or transmits the color, or reflects the color. When a light wave strikes a green object, it absorbs a magenta color.
Magenta is a combination of red and blue light, therefore, the colors that the green object will absorb is red. blue, or magenta light.
After looking at the schematics of the bubble, he finds that it holds 0.750 moles of gas at Standard Temperature and Pressure. Unfortunately for Rooster, helium gas is not sold by the mole, only by the liter. He needs to know how many liters of gas 0.750 moles of helium is.
Answer:
16.8 L
Explanation:
From the question given above, the following data were obtained:
Number of mole of He = 0.750 mole
Volume of He =?
Recall:
1 mole of any gas occupy 22.4 L at STP. This also implies that 1 mole of He occupies 22.4 L at STP.
Finally, we shall determine the volume occupied by 0.750 mole of He. This can be obtained as follow:
1 mole of He occupied 22.4 L at STP.
Therefore, 0.750 mole of He will occupy = 0.750 × 22.4 = 16.8 L at STP.
Thus, 0.750 mole of He is equivalent to 16.8 L
Use the periodic table to select the element that best fits each of the following descriptions.
Noble gas:
O oxygen
O chlorine
Okrypton
Answer:
Krypton
Explanation:
A solution is prepared by dissolving 10.6 g sodium carbonate in enough water to produce
500.0 mL solution. What is the molarity of sodium carbonate in the solution?
Answer:
0.2mol/dm³
Explanation:
Given parameters:
Mass of Na₂CO₃ = 10.6g
Volume of solution = 500mL
Unknown:
Molarity of solution = ?
Solution:
The molarity of a solution can be determined using the expression below:
Molarity = [tex]\frac{number of moles }{volume}[/tex]
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Molar mass of Na₂CO₃ = 2(23) + 12 + 3(16) = 106g/mol
Number of moles = [tex]\frac{10.6}{106}[/tex] = 0.1mol
Convert mL to dm³;
500mL will give 500 x 10⁻³dm³or 0.5dm³
So;
Molarity = [tex]\frac{0.1}{0.5}[/tex] = 0.2mol/dm³
What are essential elements in plants?
Answer:
Chlorophyll is one. I can't quite remember other
Which of the following materials will conduct electricity well?
Cotton
Metal
Rubber
Wood
Answer:
Metal
Explanation:
Rubber and Wood are insulators. and Cotton is neither a insulator nor a conductor. But Metals are conductors
Question asked: Which of the following materials will conduct electricity well?
Answer: Metal
____________________________________________________
I hope this helps!
The proper dosage of a certain medication is 0.50 mg per kilogramof of patient weight. The medication is the Spence in a liquid that contains 350.0ug of medication per mL of liquid. What volume of liquid medication should be given to a 183 Ib patient. (1kg= 2.204 lb)
Answer:
118.61 mL.
Explanation:
Hello!
In this case, since we know the concentration in the medication:
[tex]\frac{350.0\mu g}{1mL}[/tex]
Now, since there are 0.50 mg of the medication per kilogram of patient, we can compute the volume as shown below for a 183-lb patient:
[tex]183lb*\frac{1kg}{2.204lb}* \frac{0.50mg}{1kg} *\frac{1000\mu g}{1mg} *\frac{1mL}{350.0\mu g} =118.61mL[/tex]
Best regards!
11) How many moles of CO2 can be produced from
5.0 moles of O2?
Answer:
3.6 moles
Explanation:
5.0moles produce 44g/x will produce 32g the answer is a3.6moles
Some bacteria cells make people sick by releasing large molecules called toxins that affect your bodies. What
process would a bacteria cell likely use to release such large molecules?
Answer: Exocytosis is the reverse of endocytosis. Quantities of material are expelled from the cell without ever passing through the membrane as individual molecules. By using the processes of endocytosis and exocytosis, some specialized types of cells move large amounts of bulk material into and out of themselves.
Explanation:
Answer: Toxins may function to establish productive colonization conditions and work by damaging host cell membranes, by inhibiting host cell protein synthesis, and by activating secondary messengers that adversely affect host cell function.
Explanation:
infectious bacteria can make you ill. They reproduce quickly in your body. Many give off chemicals called toxins, which can damage tissue and make you sick. Examples of bacteria that cause infections include Streptococcus, Staphylococcus, and E. coli.
WOW IM A NERD
For the reaction between aqueous solutions of acetic acid (CH3COOH) and barium hydroxide, Ba(OH)2, 1. Write the balanced molecular equation.
Answer:
[tex]2CH_3COOH(aq)+Ba(OH)_2(aq)\rightarrow Ba(CH_3COO)_2(aq)+2H_2O(l)[/tex]
Explanation:
When acetic acid solution and barium hydroxide solution react together to give an aqueous solution of barium acetate and water
The balanced chemical reaction will be given by
[tex]2CH_3COOH(aq)+Ba(OH)_2(aq)\rightarrow Ba(CH_3COO)_2(aq)+2H_2O(l)[/tex]
