We can deduce about this solution is that this solution is harmful for our skin and health because contains certain chemicals that negatively affected our body.
What does corrosive symbol mean?
The corrosive symbol is used in order to warn against the chemicals that cause damage living tissue when our body physically contact with the chemical. The picture on the solution container which corrosive hazard symbol is present shows a chemical spill that causes the corrosion of a hand or a surface material. These corrosive materials may also cause severe skin and eye damage. So this solution is dangerous for our body and health so that's why it is labelled with corrosive hazard symbol.
So we can conclude that We can deduce about this solution is that this solution is harmful for our skin and health because contains certain chemicals that negatively affected our body.
Learn more about corrosive here: https://brainly.com/question/10801665
#SPJ1
An ice cube weighing 18 g is removed from a freezer where it has been at -20 C. How much heat is required to warm it to 0 c without melting it?
The amount of energy needed to raise the temperature from -20° to 0° is 730.8 J.
1) The specific heat capacity of a substance is the amount of heat needed to raise its temperature by one degree Celsius. Joules are commonly used to measure the amount of heat (J).
2) The capacity of a substance to produce heat per gram is determined by another attribute called specific heat.
By using the formulae of specific heat capacity
q = m x C x ΔT
q = mxc x (T2 - T1)
q = amount of heat energy
m = mass of sample
C = heat capacity of ice =2.03 (J/g C°)
T2 = final temperature
T = initial temperature
Mass of ice = 18 g
Initial temperature = -20 C
Final temperature = 0°
q = 18×2.03 × (0-(20))
q = 730.8 j
By using the heat capacity formulae we can find the heat energy to raise the temperature .
Learn more about Heat capacity here
https://brainly.com/question/27991746
#SPJ4
Calculate the fluoride ion concentration and ph of a solution containing 0.10 mol of hcl and 0.20 mol of hf in 1 l of solution. ka for hf equals 6.8 * 10-4.
The fluoride ion concentration is 1.4 x [tex]10^-^3[/tex], and the solution's pH is 1.
The main species in solution are [tex]H^+[/tex], [tex]Cl^-[/tex], HF, and the solvent [tex]H_2O[/tex] since HCl is a strong acid and HF is a weak acid. The question requests the fluoride ion concentration [[tex]F^-[/tex]], which are created when HF is ionized. Consequently, the crucial equation is:
[tex]HF (aq) \leftrightarrow H^+ (aq) + F^- (aq)[/tex]
Equilibrium 0.20 – x mol 0.10 + x mol 0 + x mol
Equilibrium constant = 6.8 x [tex]10^-^4[/tex]
[tex]Ka = \frac{[H^+][F^-]}{[HF]}[/tex]
6.8 x [tex]10^-^4[/tex] = [0.10] [x] / [0.20]
x = (0.20 / 0.10) x 6.8 x [tex]10^-^4[/tex]
x = 1.4 x [tex]10^-^3[/tex]
Fluoride ion concentration, [[tex]F^-[/tex]] = 1.4 x [tex]10^-^3[/tex]
[[tex]H^+[/tex]] = (0.10 +x) = 0.10M
Thus, pH = 1.00 since it is entirely from HCl and HF has negligible contribution.
Result:
The fluoride ion concentration is 1.4 x [tex]10^-^3[/tex] and the pH of the solution is 1.00.
Learn more about Fluoride ion concentration here:
https://brainly.com/question/3261237
#SPJ4
Please help me with questions 5 and 6
Explanation:
5) Uranium-234
Symbol- 234U
Names - uranium-234, U-234, Uranium II ( hist )
Protons (Z) - 92
Neutrons (N) - 142
Uranium-235
Symbol - 235U
Names - uranium-235, U-235
Protons (Z) - 92
Neutrons (N)- 143
Uranium-238
Symbol - 238U
Names - uranium-238, U-238
Protons (Z) - 92
Neutrons (N) - 146
Why don’t hydrogen ions appear in equation for half reaction occurring in basic solution
In a basic solution, the hydrogen ions do not appear in equation for half reaction.
What is a redox reaction?A redox reaction is one that involves the loss or gain of electrons. The electrons that are lost in one half equations are gained in the other half equation hence the process is synchronous. The electrons do not disappear in the process.
It is usual in some cases to use hydrogen or hydroxide ions to balance the atoms in the half equations. This occurs when the reaction is taking place in an acidic or a basic solution.
When the reaction takes place in a basic solution, there are no hydrogen ions present but only the hydroxide ions are present. Thus in a basic solution, the hydrogen ions do not appear in equation for half reaction.
Learn more about redox reaction:https://brainly.com/question/13293425
#SPJ1
A+14-karat+gold+ring+contains+58.3%+gold+and+weighs+12.41+g.+if+gold+sells+for+$308.00/ounce,+what+is+the+value+of+the+gold+in+the+ring?
The value of the gold in the ring is $78.50.
m(ring) = 12.41 g; mass of the ring
m(Au) = 0.583 × 12.41 g
m(Au) = 7.235 g; the mass of gold in the ring
m(Au) = 7.235 g × 0.0352 g/ounce
m(Au) = 0.255 ounce
value = 0.255 ounce × $308.00/ounce
value = $78.50; the value of the gold in the ring
Karat is a measure of the purity of gold. A gold karat is 1/24 part of the whole.
Gold is very ductile and can be drawn into a monoatomic wire or used in the production of rings.
More about karat: brainly.com/question/13808328
#SPJ4
What are anisotropic azobenzene materials? how is the structure of the compounds related to this phenomenon?
Anisotropic azobenzene materials are photoresponsive materials, very important in photochemistry.
The π-conjugated system and ring-substitution in azobenzene gives specific absorption in the UV-visible range of the spectrum.
Anisotropy is the property of a material which allows it to assume different properties in different directions.
Azobenzene is an aromatic molecule where two phenyl rings are connected with azo bond (–N=N–); see the picture below.
Azobenzene has the mesogenic property.
Anisotropic azobenzene materials have photoresponsive properties such as birefringence, phase transition, photoinduced colloidal deformation, surface-relief-gratings, bending, spontaneous surface pattern and dichroism.
The spectra of the cis- and trans-azobenzenes are distinct but overlapping.
More about isotropic: brainly.com/question/13045529
#SPJ4
How much 0.3 m h2so4 is needed to neutralize 34.0 ml of a 0.25 m solution of naoh?
14.1 mL H₂SO₄ is needed to neutralize solution of NaOH.
Balanced chemical equation for neutralization reaction of sulfuric acid and sodium hydroxide:
H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O
c(H₂SO₄) = 0.3 M = 0.3 mol/L; concentration of sulfuric acid
V(NaOH) = 34.0 mL = 0.034 L; volume of sodium hydroxide
c(NaOH) = 0.25 M = 0.25 mol/L; concentration of sodium hydroxide
n(NaOH) = c(NaOH) × V(NaOH)
n(NaOH) = 0.25 mol/L × 0.034 L.
n(NaOH) = 0.0085 mol; amount of sodium hydroxide
From chemical reaction: n(H₂SO₄) : n(NaOH) = 1 : 2.
n(H₂SO₄) = 0.0085 mol ÷ 2
n(H₂SO₄) = 0.00425 mol; amount of sulfuric acid
V(H₂SO₄) = n(H₂SO₄) ÷ c(H₂SO₄).
V(H₂SO₄) = 0.00425 mol ÷ 0.3 mol/L.
V(H₂SO₄) = 0.0141 L = 14.1 mL; volume of sulfuric acid
More about neutralization: brainly.com/question/23008798
#SPJ4
What is the charge on the central metal atom, the coordination number, and the overall charge for the complex ion in the compound, nh4[fe(nh3)2(cn)4]?
The charge on the central metal atom is +3.
The coordination number is 6.
The overall charge for the complex ion in the compound is -1.
Iron is the central atom in the complex ion.
The overall charge for the complex ion in the compound is -1, because it is connected to ammonium cation.
Ammonium cation (NH₄⁺) has charge +1.
The compound must have the neutral charge.
Iron is connected with six ligands.
Ligand NH₃ has no charge, while the ligand CN has charge -1.
Overall charge for the complex ion = z(Fe) + 4 × (-1) = -1
z(Fe) = +3; the charge on the central metal atom.
More about complex ion: brainly.com/question/24262383
#SPJ4
If it takes 1.25 min for 0.010 mol of he to effuse, how long will it take for the same amount of ethane (c2h6) to effuse?
It will take 3.43 minutes for the same amount of ethane to effuse.
t(He) = 1.25 min; time of helium to effuse
M(He) = 4 g/mol; molar mass of helium
M(C₂H₆) = 30 g/mol; molar mass of ethane
rate of effusion of helium = 1/√M(He)
rate of effusion of helium = 1/√4
rate of effusion of helium = 0.5
rate of effusion of ethane = 1/√M(C₂H₆)
rate of effusion of ethane = 1/√30
rate of effusion of ethane = 0.182
rate of effusion of helium : rate of effusion of ethane = 0.5 : 0.182
rate of effusion of helium : rate of effusion of ethane = 2.74
t(C₂H₆) = 1.25 min × 2.74
t(C₂H₆) = 3.43 min
More about effusion: brainly.com/question/2097955
#SPJ4
Two different compounds containing osmium and oxygen have the following mass of oxygen per grams of osmium 0.168 & 0.3369g. Show that these amounts are constituent with the law of multiple proportions
Yes, given compound's amount are constituent with the law of multiple proportions .
Briefing :mass of oxygen = 0.168g
mass of osmium = 0.3369g
So,
the proportion = (0.3369 / 0.168)
the proportion = 2.00
That is, multiple proportions.
The ratio of the masses of O combined with 1 g of Os in the compound must be a small whole number in order for the law of multiple proportions to hold.
Note that there are only two elements being discussed in the problem. Different compounds are being created by the two elements combining in various ways.
What is law multiple proportions?The law of multiple proportions states that when two elements combine to form more than one compound, the combined weights of each element are in a ratio of small whole numbers.
To know more about compound :
https://brainly.com/question/13516179
#SPJ9
A solution of cacl2 in water forms a mixture that is 28.0alcium chloride by mass. if the total mass of the mixture is 663.2 g, what masses of cacl2 and water were used?
Mass of CaCl2 = 663.2 g x 28% = 185.696g
So, Mass of water = Total mass - Mass of CaCl2 = 663.2 g - 185.696 g
⇒ Mass of water = 477.504g
What is Mass?Mass is a physical body's total amount of matter. It also serves as a gauge for the body's inertia, or resistance to acceleration (change in velocity) in the presence of a net force. The strength of an object's gravitational pull to other bodies is also influenced by its mass.The kilogram is the primary mass unit in the SI (kg).While weight has to do with how strongly a gravitational field is drawing matter in, mass is the quantity of matter. As a result, while the weight will fluctuate depending on the quantity of mass and how far away the body is from the center of gravity, the mass is a more or less absolute dimension.To learn more about Mass, refer to:
https://brainly.com/question/19694949
#SPJ4
An atom in its ground state contains 18 electrons. how many of these are in orbitals with ml = 0?
There are 6 electrons present in the orbital containing (ml=0).
Let the element be X. Now its electronic configuration will be
For 's' orbital the value of l = 0
X(18) = 1s^2, 2s^2, 2p^6, 3s^2, 3p^6
With this electronic configuration, three sublevels are present for the 's' orbital which are 1s^2, 2s^2, and 3s^2 respectively.
Now, let's calculate the electrons in the 's' orbital with l = 0
1s^2, 2s^2, 3s^2 = 2 + 2 + 2
1s^2, 2s^2, 3s^2 = 6
Thus, an atom containing 18 electrons in its ground state has 6 electrons.
If you need to learn more about orbitals click here:
https://brainly.com/question/26000020
#SPJ4
How many atoms of carbon are present in 8.06 grams of carbon tetrabromide ? atoms of carbon .
1.463×10²² atoms of carbon are present in carbon tetrabromide.
m(CBr₄) = 8.06 g; mass of carbon tetrabromide
M(CBr₄) = 331.63 g/mol; molar mass of carbon tetrabromide
n(CBr₄) = m(CBr₄) ÷ M(CBr₄)
n(CBr₄) = 8.06 g ÷ 331.63 g/mol
n(CBr₄) = 0.0243 mol; amount of carbon tetrabromide
There is one carbon atom in one molecule of carbon tetrabromide: n(CBr₄) : n(C) = 1 : 1
n(C) = 0.0243 mol; amount of carbon atom
N(C) = n(C) × Na.
N(C) = 0.0243 mol × 6.022·10²³ 1/mol.
N(C) = 1.463×10²² atoms of carbon in carbon tetrabromide
Na - Avogadro constant or Avogadro number.
More about atom: brainly.com/question/11935748
#SPJ4
The half-life of nickel-65 is 2.50 days. how much of a 100.-g sample remains after 7.50 days?
12.5g of a 100.-g sample remains after 7.50 days.
What is half-life?Half-life is the amount of time required for a substance's radioactivity to decrease to half its initial value, whereas mean life is the average lifetime of all the nuclei of a specific unstable atomic species.
Knowing about half-life is helpful for calculating steady-state concentrations and excretion rates for each particular drug.
Despite the fact that individual medications' half-lives vary, they always adhere to the same principle: 50% of the initial drug dose leaves the body after one half-life.
The half-life of xenon-124, or the typical amount of time needed for a collection of xenon-124 atoms to decay by half, is about 18 sextillion years (1.8 x 1022 years), or roughly 1 trillion times the universe's present age.
To learn more about half-life, refer
https://brainly.com/question/1160651
#SPJ4
Write an equation for the reaction that occurs when a few drops of hydrochloric acid are added to the buffer. (nac2h3co2) of a 0.150 m acetic acid (h c2h3co2, ka = 1.8 10-5)
The equation for the reaction occurs when a few drops of hydrochloric acid are added to the buffer is:
[tex]NaOH[/tex] + [tex]Na[/tex][tex]C_{2[/tex][tex]H_{3}[/tex][tex]O_{2}[/tex] → [tex]HC_{2} H_{3} O_{2}[/tex] + [tex]Na_{2}O[/tex]
The NH3 uses the extra H+ ions that were added to the system by the addition of HCl (strong acid) to produce [tex]NH_{4}[/tex]+. Since all extra H+ ions have been captured and changed. The pH of the system hasn't altered significantly; [tex]NH_{4}[/tex]+ is a weaker acid.
When a strong acid (H3O+) is given to the buffer solution, the conjugate base in the buffer eats the hydronium ion, converting it into the water and the conjugate base's weak acid. As a result, there are more weak acids present and fewer conjugate bases as well.
To know more about buffers refer to: https://brainly.com/question/16556401
#SPJ4
Janice measured the mass and the volume of an object. She then determined the density of the object by dividing the object’s mass by its volume (D = ).
Which value would most likely represent the density of the object?
–1 g/cm3
4 m/s
–3 m/s
6 g/cm
The value which is most likely represent the density of the object is option d. 1 g/cm³
Density is described as the ratio of mass to extent of an item. Density is immediately proportional to mass and inversely proportional to quantity, this is, density increases with boom in mass and reduces with growth quantity.
The unit of density is gram in line with cubic centimeter (g/cm³).
Density = [tex]\frac{mass}{volume}[/tex] = [tex]\frac{g}{cm³}[/tex]
unit of mass can be gram, kilogram etc.
unit of volume is, metre³ etc.
The key distinction among density and weight is that weight is a degree of the amount of depend in an object, whereas density measures the quantity of depend in a unit volume.
Density is an crucial concept because it permits us to decide what substances will flow and what materials will sink when placed in a liquid. commonly, substances waft so long as their density is less than the density of the liquid.
Learn more about density here:-https://brainly.com/question/1354972
#SPJ1
What+is+the+major+disadvantage+of+using+concentrated+sulfuric+acid+rather+than+85%+phosphoric+acid+for+the+dehydration+of+alcohols?
The major disadvantage of using concentrated sulfuric acid rather than 85% phosphoric acid for the dehydration of alcohols is that concentrated sulfuric acid produces messy results.
Concentrated sulfuric acid or concentrated phosphoric(V) acid (H₃PO₄) are used in alcohol dehydration.
Concentrated sulfuric acid eliminates a water molecule from the organic molecule in a dehydration reaction.
Sulfuric acid (H₂SO₄) is a strong acid and a strong oxidizing agent.
It oxidizes the alcohols to carbon dioxide, while it is reduced to sulfur dioxide. Reaction is very exothermic, release a lot of energy.
Sulfuric acid is strong diprotic acid. It dissociates on hydrogen cations (H⁺) and sulfate anion (SO₄²⁻).
More about alcohol: brainly.com/question/9867663
#SPJ4
When sodium oxide is added dropwise to a buffered solution the_____ component of the buffer consumes the added hydroxide ion
When sodium oxide is added dropwise to a buffered solution the weak acid component of the buffer consumes the added hydroxide ion.
What is a buffer?A weak acid and its conjugate base must be present in a buffer. A solution containing these two components can be made in several ways: buffers can be made from weak acids or bases and their salts.
When a buffer is present in the solution, the hydroxide (OH-) ions react with the weak acid in the buffer solution rather than with water, resulting in water and A- ions.
Thus, the weak acid of the buffer absorbs the excess hydroxide ions from the solution.
For more details regarding buffer, visit:
https://brainly.com/question/22821585
#SPJ4
Does a reaction occur when aqueous solutions of lead(ii) nitrate and aluminum sulfate are combined?
Yes, the reaction will occur .
Al2(SO4)3+3Pb(No3)2 →3PbSO4+2Al(NO3)3.
How can you tell whether a chemical equation has no reaction?We use the (aq) mark to indicate a substance dissolves if it is soluble. We employ the (s) label with a substance and anticipate that it will precipitate out of solution if it is not soluble. There won't be any expected reaction if everything is solvable.
When aqueous solution of lead (II) nitrate and aluminium chloride are combined, lead(II) chloride will precipitate.
To learn more about Reaction refer
https://brainly.com/question/17434463?
#SPJ4
For the amino acid alanine, the major species in solution at ph 7 is the zwitterionic form, which has a negatively charged carboxylic acid group and a positively charged amino group. There is a less common neutral form in which neither group is charged. The carboxylic acid group of alanine has a pka of 3. The amino group of alanine has a pka of 8. Estimate the ratio of the concentration of the neutral amino acid species to the zwitterionic species at ph 7.
The ratio between the neutral and the zwitterionic form of alanine at pH 7 is 1:100000.
Since the carboxylic group has a pKa of 3, that means that at pH 3 the ratio between its protonated and deprotonated (charged) form is 1:1. The difference between pH 7 and pH 3 is 7 - 3 = 4, which means that (because pH is a negative logarithm), pH 7 is 10000 times more basic than pH 3. This implies that the ratio between the protonated and the deprotonated form of the carboxylic group is 1:10000.
A similar calculation can be applied to the amino group. 8 - 7 = 1, so at pH 7, the ratio between its protonated (charged) and deprotonated form will be 10:1.
We then multiply these two ratios to get a ratio of neutral:zwitterionic = 1:100000.
You can find out more about alanine here:
brainly.com/question/28148042
#SPJ4
Which species has two more neutrons than electrons?
The species that has two more neutrons than electrons are ₂₀⁴⁰Ca²⁺ and ₁₁²³Na⁺ has two more neutrons than electrons; option C and D
What are the fundamental particle in an atom?The fundamental particles in an atom are the particles which make up the atom.
An atom is composed of three fundamental particles:
protonsneutrons, andelectronsThe number of protons in atom is the atomic number of the element.
The number of neutrons in atom is the difference between the mass number and atomic number of the atom.
For the given species;
₃⁶Li⁺:
number of protons = 3;
number of neutrons = 6 - 3 = 3
number of electrons = 3 -1 = 2
₄⁹Be²⁺:
number of protons = 4;
number of neutrons = 9 - 4 = 5
number of electrons = 4 -2 = 2
₁₁²³Na⁺:
number of protons = 11
number of neutrons = 23 - 11 = 12
number of electrons = 11 -1 = 10
₂₀⁴⁰Ca²⁺:
number of protons = 20
number of neutrons = 40 - 20 = 20
number of electrons = 20 -2 = 18
Therefore, ₂₀⁴⁰Ca²⁺ and ₁₁²³Na⁺ has two more neutrons than electrons.
Learn more about electrons and neutrons at: https://brainly.com/question/28476164
#SPJ1
You poured out a little (or a lot) too much of a chemical solution. it is ok to pour it back into the bottle.
a) true
b) false
(b) false
It is not ok to pour it back in the bottle
Once a chemical is taken outside its bottle or container , it reacts with various gases present in the natural environment and also with those chemical which are being released in that laboratory.This will become a source of possible contamination for the entire contents of the stock bottle.The disposal of entire chemicals should be done as per instructed on the reagent bottle to prevent any dangerYou should never put the used spatula inside the reagent bottle.Do not put the excess chemicals inside the sink also , dispose it as it was instructed on the reagent bottle.To know more about chemical safety please refer:
https://brainly.com/question/4430099
#SPJ4
Two difference between red blood cells and white blood cells:
Red blood cells
[•] More in numbers.
[•] No antibodies present in these cells.
White blood cells
[•] Less in numbers
[•] Antibodies are present in these cells.
151 grams of SO2 is equal to how meany moles
Answer:
151 g SO₂ × [1 mol SO₂/64.06 g SO₂] = 2.36 mol SO₂
Explanation:
Which molecule is more soluble in water?
ch3ch2och3 (g) ch3ch2och2ch3(l) ch3ch2och3 (g) ch3ch2och2ch3(l) both are the same solubility
Of the two ether molecules given, ethyl methyl ether is the smaller molecule and thus more soluble in water. Diethyl ether has a larger molecule compared to ethyl methyl ether. CH₃CH₂OCH₃ is more soluble in water
Methyl ether is slightly more polar than diethyl ether. Methyl ether is much more volatile
Chemical compounds are classified based on the groups that exist within the compound known as functional groups. Ether is one of the functional groups of the form ROR', where the two alkyl groups can be the same or the two alkyl groups can be different.
He is given two structures, CH3CH2OCH2CH3 and CH3CH2OCH3. One is diethyl ether and the other is ethyl methyl ether. The two structures contain oxygen atoms, thus participating in hydrogen bonding.
Therefore, the solubility of a compound depends on its molecular size. The smaller the molecular size, the greater the solubility of the compound in water.
Of the two ether molecules given, ethyl methyl ether is the smaller molecule and thus more soluble in water. Diethyl ether has a larger molecule compared to ethyl methyl ether.
CH3CH2OCH3 is more soluble in water than CH3CH2OCH2CH3.
Learn more about solubility here https://brainly.com/question/23946616
#SPJ4
When a carbonate reacts with an acid it produces carbon dioxide, a salt, and what other product? Give the name, not the formula
A salt, water, and carbon dioxide are produced when acids react with carbonates, such as calcium carbonate (found in chalk, limestone, and marble). Fizzing is the result of the reaction's bubbling, which is caused by the carbon dioxide.
What happen when a carbonate reacts with an acid ?Salt, carbon dioxide, and water are produced when an acid combines with metal carbonate.
An illustration of this reaction is the formation of sodium chloride, carbon dioxide, and water when diluted hydrochloric acid combines with sodium carbonate.
2NaCl (aq) + CO2 (g) + H2O = Na2CO3(s) + 2HCl (aq) (l)
Because the acid is neutralised in these reactions, they are known as neutralisation reactions. In other words, the pH of the mixture approaches 7, or the acid and base (carbonate) are neutralised.
Learn more about Neutralization reaction here:
https://brainly.com/question/2632201
#SPJ9
Ali notices that the electrical cord on his microscope is frayed near the plug. He takes the microscope to his teacher and asks for permission to use another one.
Yes, Ali did the correct job by taking the microscope to his teacher and asks for permission to use another one.
We should never use equipment with frayed or damaged electrical cord and should inform our teacher or lab assistant immediately. This situation comes under measure lab safety rules.These and all other electrical equipment used in lab settings provide a risk of electric shock injuries, fires from faulty installations or maintenance, and fires from sparks acting as an ignition source for flammable or combustible chemicals.Discover where your electrical panels and shut-off switches are so you can immediately turn off the power in an emergency. Always provide at least three feet of space around electrical panels so that people can easily access them.Working with damaged equipment or electric cord can lead to big accidents in the labs.It shows Ali followed lab safety rule properly.
Learn more about lab safety rules here:
https://brainly.in/question/13414900
#SPJ9
What is the maximum length of a stem used for pendant lighting before bracing is required?
With no additional bracing needed, the maximum length of the stem utilized for pendant lightning is 12 in. (300 mm) or less. Lateral braces or an explosive flexible coupling must be utilized within 12 inches of the lightning fixture if the length is greater than 12 inches.
If you're planning on installing pendant lighting in your home, you'll need to be aware of the maximum length of the stem that can be used. According to the National Electric Code, the maximum length of the stem for pendant lighting is 12 inches (300 mm) or less. If the length of the stem is greater than 12 inches, you'll need to use lateral braces or an explosive flexible coupling within 12 inches of the lightning fixture. This will help to ensure the safety of your home and prevent any damage from occurring.
Learn more on stem here:
https://brainly.com/question/28181080
#SPJ4
9)
Solve the question above:
A car with a 14-gallon gas tank gets 22 mpg gas mileage. How far can the car travel on a full tank of gas?
distance traveled on a full tank = ? miles
A car with a 14 gallon gas tank get 22 mpg gas mileage. The distance traveled by a car on full tank is 308 miles.
capacity of car tank = 14 gallon
mileage of car = 22 mpg ( miles per gallon )
distance traveled on a full tank = ?
to find out the distance traveled by a car on full tank of gas,
distance traveled on full tank = capacity of car tank × mile per gallon
= 14 gallon × 22 miles / gallon
= 308 miles.
Thus , A car with 14 gallon gas tank get 22 mpg gas mileage. the distance traveled by a car on a full tank of gas is 308 miles.
To learn more about car mileage here
https://brainly.com/question/17103969
#SPJ1
Calculate the volume in milliliters of a 0.875 m sodium sulfate solution containing 8.90 g of sodium sulfate?
The volume of the solution in milliliters is 60 mL.
Mass of sodium sulfate = 8.90 g
Molarity of solution of sodium sulfate = 0.875 M
Number of moles sodium sulfate is,
[tex]Number \: of \: moles = \frac{ Mass}{ Molar \: mass}[/tex]
[tex]n = \frac{m}{ M}[/tex]
[tex] = \frac{8.90}{142} [/tex]
= 0.06 moles
There are 0.06 moles of sodium sulfate.
The volume of the solution is,
[tex]Molarity = \frac{Number \: of \: moles \: of \: sodium \: sulphate}{ Volume \: of \: the \: solution }[/tex]
[tex]Volume \: of \: the \: solution = \frac{ Number \: of \: moles \: of \: sodium \: sulphate }{Molarity}[/tex]
[tex] = \frac{0.06} {0.875}[/tex]
= 0.06 L
The volume of the solution is 0.06 L.
The volume of the solution is milliliters is,
1 L = 1000 ml
0.06 L = 0.06 × 1000
= 60 mL.
Therefore, the volume of the solution in milliliters is 60 mL.
To know more about molarity, refer to the below link:
https://brainly.com/question/2817451
#SPJ4
