a student performed a recrystallization of phthalic acid and used 15 ml of water as the solvent. assuming no loss of solvent to evaporation, calculate the loss of product in the filtrate based on the solubility of phthalic acid.

The concentration of KCl in the solution made by mixing 40.0 mL of 0.100 M KCl with 50.0 mL of 0.100 M KCl is [tex]0.0444 M.[/tex].

The solution can be calculated by using the formula for dilution of a solution.

Dilution formula: C1V1 = C2V2

Where:

C1 = Initial concentration

C2 = Final concentration

V1 = Initial volume

V2 = Final volume

For this problem:

[tex]C1 = 0.100 M \\V1 = 40.0 mL \\V2 = 90.0 mL (40.0 mL + 50.0 mL)[/tex]

Now we can solve for C2:

C2 = [tex]\frac{(C1V1) }{ V2}[/tex]

C2 = [tex]\frac{(0.100 M * 40.0 mL) }{90.0 mL}[/tex]

C2 = [tex]0.0444 M[/tex]

Therefore, the concentration of KCl in the solution made by mixing 40.0 mL of 0.100 M KCl with 50.0 mL of 0.100 M KCl is [tex]0.0444 M.[/tex]

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ4

Covalently linked chains of carbon atoms with hydrogen atoms attached form the basis of many organic molecules (a hydrocarbon backbone). This indicates that the presence of carbon and hydrogen atoms is a property shared by all organic molecules. Thus, option A is correct.

The majority of organic matter is made of living organisms in the soil ("the living"), new residue ("the dead"), and well-decomposed (or burned) material ("the very dead") that is chemically or physically resistant to decomposition.

Because organic molecules are formed of carbon atoms connected to other elements like hydrogen, nitrogen, sulphur, and others, organic compounds contain carbon and hydrogen alone is not a feature of an organic compound.

Therefore, One characteristic shared by all organic molecules is they all have a carbon skeleton.

Learn more about organic molecules here:

https://brainly.com/question/10504103

#SPJ1

Answer:

Explanation:

The balanced equation for the reaction between lead (Pb) and copper (II) sulfate (CuSO4) is:

Pb + CuSO4 -> PbSO4 + Cu

In this equation, one mole of lead reacts with one mole of copper (II) sulfate to produce one mole of lead sulfate and one mole of copper. This equation represents a redox reaction, where lead acts as the reducing agent and copper (II) sulfate acts as the oxidizing agent. The transfer of electrons from lead to copper (II) sulfate results in the formation of lead sulfate and copper.

Cooler materials are more dense than warmer materials because density increases as temperature decreases.

This is due to the fact that molecules slow down as the temperature drops, causing them to move closer together and increase the density of a material. This is known as the Law of Charles and Gay-Lussac, which states that the pressure of a gas is directly proportional to its temperature. As the temperature decreases, the pressure also decreases, causing the molecules to come closer together and increase the density of the material.This is due to the fact that thermal energy, which causes particles to move farther apart, is reduced when temperature decreases. As the particles become more tightly packed, the material becomes denser.

learn more about Gay-Lussac Refer:brainly.com/question/1358307

#SPJ4

When temperature of a reaction mixture rises as the energy is released during an exothermic process. Inside an endothermic reaction, its temperature drops as energy is absorbed.

Enthesogenic responses Heat is taken in. 1) Photosynthesis: In order to transform carbon water and carbon dioxide and oxygen, plants must absorb heat sunlight energy. 2) Heating an egg: The egg is cooked by absorbing heat energy from the pan.

Endothermic relates to any chemical reaction that absorbs heat from the environment. This energy that has been absorbed provides the activation energy for the process. This type of reaction is distinguished by its frigid feeling.

To know more about endothermic visit:

brainly.com/question/1371775

#SPJ1

A net ionic equation describing the total reaction between sodium hydroxide and phosphoric acid (h3po4) in aqueous solutions.

H3PO4(aq) → Na3PO4(aq) + 3H2O(l)

To write the net ionic equation, we need to first write the balanced ionic equation, which shows all the ions in solution that participate in the reaction. The ionic equation for the reaction is:

3Na+(aq) + 3OH-(aq) + H3PO4(aq) → Na3PO4(aq) + 3H2O(l)

Next, we cancel out the spectator ions, which are the ions that appear on both sides of the equation and do not participate in the reaction. In this case, the spectator ions are the sodium ions (Na+) and the hydroxide ions (OH-). The net ionic equation is then:

H3PO4(aq) → Na3PO4(aq) + 3H2O(l)

This equation shows the actual chemical change that occurs in the reaction, which is the transfer of a proton (H+) from the phosphoric acid to the hydroxide ion, forming water and the phosphate ion.

Learn more about ionic equation here:

https://brainly.com/question/29299745

#SPJ4

A substance's "optical characteristics," or capacity to reflect light, vary depending on the substance. Due to the fact that a substance's chemical and physical characteristics affect how light interacts with it.

Some light that strikes a surface may be absorbed by it, while the rest may be reflected back. The optical characteristics of a material, which are influenced by its chemical and physical structure, govern how well it can reflect light. Varied materials have varying reflectivity and absorbance spectra, which describe how much light is reflected or absorbed at various wavelengths, as well as different indices of refraction, which explain how much light is bent when it travels through the material. These characteristics are crucial for a variety of applications, including the development of optical coatings and lenses as well as spectroscopy-based material composition analysis.

Learn more about "reflect light." here:

https://brainly.com/question/22015933

#SPJ4

The effects of a catalyst on a chemical reaction are to react with the product, effectively removing it and shifting the equilibrium to the right. The given statement is False.

Catalysts are substances that can increase the rate of a chemical reaction without being consumed in the process. They work by providing an alternative pathway for the reaction to occur, with lower activation energy. This allows more reactant molecules to overcome the energy barrier and form products in a shorter amount of time. Catalysts do not change the thermodynamics of the reaction, which means that they do not affect the equilibrium position of the reaction. Therefore, they cannot shift their reaction to the right or the left, and they do not consume any of the products. Catalysts can be used in a wide range of chemical reactions, from industrial processes such as the Haber-Bosch process for ammonia synthesis to biological reactions such as enzyme-catalyzed reactions in the human body. By providing a more efficient and selective way to carry out chemical transformations, catalysts play a critical role in modern chemistry and are essential to many industrial processes.

To know more about the effects of catalysts, visit:https://brainly.com/question/29138717

#SPJ4

The 4% accuracy mentioned in the question was not specific to any particular measurement. It is a general assumption about the maximum amount of error that could be present in the measured ion-ion distances.

To predict the cation-anion distance using the values of ionic radii given in Figure 7.7, we can simply add the ionic radii of the cation and anion. The ionic radii for Li+, Na+, K+, and Rb+ are given in the figure as 0.76 Å, 1.02 Å, 1.38 Å, and 1.52 Å, respectively. The ionic radii for F-, Cl-, Br-, and I- are given as 1.19 Å, 1.81 Å, 1.96 Å, and 2.20 Å, respectively. Adding the appropriate cation and anion radii gives the following predicted cation-anion distances:

LiF: 0.76 Å + 1.19 Å = 1.95 Å

NaCl: 1.02 Å + 1.81 Å = 2.83 Å

KBr: 1.38 Å + 1.96 Å = 3.34 Å

RbI: 1.52 Å + 2.20 Å = 3.72 Å

To calculate the difference between the experimentally measured ion-ion distances and the ones predicted, we can subtract the predicted distance from the measured distance. The differences are:

LiF: 2.01 Å - 1.95 Å = 0.06 Å

NaCl: 2.82 Å - 2.83 Å = -0.01 Å

KBr: 3.30 Å - 3.34 Å = -0.04 Å

RbI: 3.67 Å - 3.72 Å = -0.05 Å

Assuming an accuracy of 0.04 Å in the measurement, we can say that the LiF and KBr values are within the margin of error, while the NaCl and RbI values are outside the margin of error. However, it is important to note that these differences are relatively small and may be attributed to experimental error.

Bonding atomic radii are typically used to estimate the size of the atom that forms a covalent bond. To estimate the cation-anion distance using bonding atomic radii, we can add the bonding atomic radii of the cation and anion. The bonding atomic radii for Li, Na, K, and Rb are 1.28 Å, 1.54 Å, 1.96 Å, and 2.11 Å, respectively. The bonding atomic radii for F, Cl, Br, and I are 0.71 Å, 0.99 Å, 1.14 Å, and 1.33 Å, respectively. Adding the appropriate cation and anion radii gives the following estimated cation-anion distances:

LiF: 1.28 Å + 0.71 Å = 1.99 Å

NaCl: 1.54 Å + 0.99 Å = 2.53 Å

KBr: 1.96 Å + 1.14 Å = 3.10 Å

RbI: 2.11 Å + 1.33 Å = 3.44 Å

Learn more about ionic compounds here: brainly.com/question/2687188

#SPJ4

The concentration of sulfuric acid remaining after neutralization is 0 M.

First, we need to determine the number of moles of [tex]H_{2} SO_{4}[/tex] and KOH that are present in the solution.

The number of moles of [tex]H_{2} SO_{4}[/tex] in 0.450 L of 0.450 M solution can be calculated as follows:

moles [tex]H_{2} SO_{4}[/tex] = volume of solution (L) x molarity

moles [tex]H_{2} SO_{4}[/tex] = 0.450 L x 0.450 mol/L

moles [tex]H_{2} SO_{4}[/tex] = 0.2025 mol

Similarly, the number of moles of KOH in 0.400 L of 0.270 M solution can be calculated as follows:

moles KOH = volume of solution (L) x molarity

moles KOH = 0.400 L x 0.270 mol/L

moles KOH = 0.108 mol

The balanced chemical equation for the reaction between [tex]H_{2} SO_{4}[/tex] and KOH is:

[tex]H_{2} SO_{4}[/tex] + 2KOH → [tex]K_{2} SO_{4}[/tex] + [tex]2H_{2} O[/tex]

From the equation, we can see that 1 mole of [tex]H_{2} SO_{4}[/tex] reacts with 2 moles of KOH. Since the number of moles of KOH (0.108 mol) is less than half the number of moles of [tex]H_{2} SO_{4}[/tex] (0.2025 mol), KOH is the limiting reactant.

The reaction between [tex]H_{2} SO_{4}[/tex] and KOH consumes all of the KOH and produces [tex]K_{2} SO_{4}[/tex] and [tex]H_{2} O[/tex].

The number of moles of [tex]H_{2} SO_{4}[/tex] that reacts with KOH is:

moles [tex]H_{2} SO_{4}[/tex] consumed = 2 x moles KOH

moles [tex]H_{2} SO_{4}[/tex] consumed = 2 x 0.108 mol

moles [tex]H_{2} SO_{4}[/tex] consumed = 0.216 mol

The number of moles of [tex]H_{2} SO_{4}[/tex]that remain after neutralization is:

moles [tex]H_{2} SO_{4}[/tex] remaining = initial moles [tex]H_{2} SO_{4}[/tex] - moles [tex]H_{2} SO_{4}[/tex] consumed

moles [tex]H_{2} SO_{4}[/tex] remaining = 0.2025 mol - 0.216 mol

moles [tex]H_{2} SO_{4}[/tex] remaining = -0.0135 mol

Since we cannot have a negative number of moles, this means that all of them [tex]H_{2} SO_{4}[/tex] has been consumed and there is an excess of KOH remaining.

Therefore, the concentration of sulfuric acid remaining after neutralization is 0 M.

For similar question concentration,

https://brainly.com/question/26255204

#SPJ4

If the temperature of the gas is underestimated, the value of the ideal gas constant (R) will be overestimated because R is inversely proportional to the temperature.

The ideal gas law describes the behavior of gases under certain conditions, assuming that they behave as an ideal gas. The equation relates the pressure, volume, temperature, and number of moles of a gas, and is written as PV = nRT, where P is the pressure of the gas, V is its volume, n is the number of moles of gas, T is the temperature, and R is the ideal gas constant.

The ideal gas constant, R, is a proportionality constant that relates the physical properties of the gas to its behavior as an ideal gas. The value of R depends on the units used for pressure, volume, and temperature, and it can be calculated using the equation R = PV/nT.

The value of R is inversely proportional to the temperature of the gas. This means that as the temperature of the gas decreases, the value of R increases, and vice versa. Therefore, if the temperature of the gas is underestimated, the calculated value of R will be higher than it should be. This can lead to errors in other variables that are calculated using the ideal gas law, such as the pressure, volume, or number of moles of gas.

It's important to note that the ideal gas law is only an approximation, and it may not accurately describe the behavior of real gases under all conditions. However, the ideal gas law is a useful tool for understanding the behavior of gases, and it can be used to make predictions about the behavior of gases in various situations, as long as the conditions are close enough to those of an ideal gas.

To learn more about ideal gas law Click here:

brainly.com/question/28257995

#SPJ4

According to the question, Copper (II) nitrate, Cu(NO3)2 is the limiting reactant.

What is limiting reactant?

A limiting reactant, also known as a limiting reagent, is a reactant that limits the amount of product that can be produced in a chemical reaction. It is typically the reactant that is used up first in the reaction, preventing any further reaction from occurring. The limiting reactant is also referred to as the “rate-determining” reagent, because its depletion determines the rate at which the chemical reaction proceeds. In a chemical reaction, the amount of product formed is determined by the amount of limiting reactant that is available. When the limiting reactant is used up, the reaction stops, regardless of whether other reactants are present or not. In order to determine the limiting reactant, one must calculate the moles of each reactant and compare the values to determine which one is used up first. Once the limiting reactant is known, the theoretical yield of the reaction can be determined.

To learn more about limiting reactant
https://brainly.com/question/14222359

#SPJ1

A water molecule consists of one oxygen atom joined to each of two hydrogen atoms by a(n) covalent bond, a type of bond in which the electrons do not spend equal time with the two atoms involved.

Because oxygen is more electronegative than hydrogen, the electrons in a water molecule spend more time closer to the oxygen atom.
The unequal distribution of electrons means that each of the three atoms in a water molecule has a partial charge. This makes water a polar molecule.
The oxygen of a water molecule has a partial negative charge.
Each hydrogen in a water molecule has a partial positive charge.
A weak bond called a(n) hydrogen bond forms as a result of the attraction between the slightly positive hydrogen of one water molecule and the slightly negative oxygen of a nearby water molecule.
A covalent bond is a chemical bond in which atoms share electrons. Electronegativity is the measure of an atom's ability to attract shared electrons to itself. Polar molecules have a net dipole moment, which arises from an uneven distribution of electron density. A hydrogen bond is a type of weak intermolecular bond that occurs between a hydrogen atom in a molecule and an electronegative atom in a nearby molecule.

Learn more about covalent bonds here:

https://brainly.com/question/10777799

#SPJ4

Saturated fats have all of the following characteristics except that they tend to dissolve in water fluently.

Saturated fats are a type of salutary fat that are generally attained from beast sources(e.g., meat, dairy products) and some factory sources(e.g., coconut oil painting, win oil painting). They're called" impregnated" because they've a high proportion of impregnated adipose acids, which have single bonds within the carbon chain and are" impregnated" with hydrogen tittles. As a result, they're solid at room temperature and have a fairly high melting point. impregnated fats are generally considered to be less healthy than unsaturated fats because they can increase situations of LDL( low- viscosity lipoprotein) cholesterol, which is a threat factor for cardiovascular complaint. thus, it's recommended that people limit their input of impregnated fats and replace them with unsaturated fats, similar as those set up in nuts, seeds, and vegetable canvases . still, impregnated fats don't tend to dissolve in water fluently, which is the characteristic that sets them piecemeal from other types of salutary fats. rather, they're hydrophobic and tend to dissolve in nonpolar detergents, similar as chloroform or ether.

learn more about saturated here:

https://brainly.com/question/30550270

#SPJ4

Answer:

14.594% Iron and 85.406% Sulfur

Explanation:

103g (S) + 17.6g (Fe) = 120.6g total mass

103/120.6 × 100 = 85.406% Sulfur

17.6/120.6 × 100 = 14.594% Iron

the actual volume of water measured out is 10.02 ml, which is slightly higher than the intended volume of 10 ml. This could be due to various factors, such as the presence of air bubbles or human error in reading the pipet

To determine the actual volume of water measured out, we need to use the given information about the mass and density of water.

First, we can use the density formula to calculate the mass of 10 ml of water:

density = mass / volume

Rearranging the formula, we get:

mass = density x volume

Substituting the given values, we get:

mass = 0.9978 g/ml x 10 ml = 9.978 g

This means that the mass of the water measured out is 9.978 g.

However, the question states that the mass of the measured water is 9.990 g. This means that there is an additional mass of water that was inadvertently added or that there is an error in the measurement.

To find the actual volume of water measured out, we can use the following formula:

actual volume = measured mass / density

Substituting the given values, we get:

actual volume = 9.990 g / 0.9978 g/ml = 10.02 ml

Therefore, the actual volume of water measured out is 10.02 ml, which is slightly higher than the intended volume of 10 ml. This could be due to various factors, such as the presence of air bubbles or human error in reading the pipet

To know more aboutactual volume   click here:

brainly.com/question/24179676

#SPJ4

⁹⁴Pu₃₃ [tex]\rightarrow[/tex] ³³⁵U  +  ₂⁴He is an example of a spontaneous. Therefore, the correct option is option A among all the given options.

A spontaneous process in thermodynamics is one that happens without even any outside input to the network. A more precise meaning is a system's time-evolution in which it releases free energy and goes to a lower, higher entropically stable energy level (closer to thermodynamic equilibrium).

The sign method for free energy follows the standard practice for thermodynamics measurements, in which the system releases free energy. ⁹⁴Pu₃₃ [tex]\rightarrow[/tex] ³³⁵U  +  ₂⁴He is an example of a spontaneous.

Therefore, the correct option is option A.

To know more about spontaneous, here:

https://brainly.com/question/8039477

#SPJ9

The theoretical yield of CO2 in moles when there is 63.2 moles of O2 present is 63.2 moles.

A chemical reaction is a process in which one or more substances, called reactants, are converted into one or more different substances, called products. This process involves the breaking and forming of chemical bonds between atoms and/or molecules, resulting in a change in the chemical composition of the substances involved.

Chemical reactions can be classified into several different types based on the changes that occur during the reaction, including:

Synthesis or combination reactions: where two or more reactants combine to form a single product.

Decomposition reactions: where a single reactant breaks down into two or more products.

Single replacement or displacement reactions: where one element replaces another element in a compound, resulting in the formation of a new compound.

Double replacement or displacement reactions: where two compounds exchange ions or atoms to form two new compounds.

Acid-base reactions: where an acid and a base react to form a salt and water.

Assuming that the balanced chemical equation is:

C + O2 → CO2

We can see that the stoichiometric ratio between O2 and CO2 is 1:1. This means that for every 1 mole of O2 consumed, 1 mole of CO2 is produced. Therefore, if there are 63.2 moles of O2 present, the theoretical yield of CO2 would also be 63.2 moles.

So, the theoretical yield of CO2 in moles when there is 63.2 moles of O2 present is 63.2 moles.

To know more about moles visit:

https://brainly.com/question/15209553

#SPJ1

In a compound reaction, 80 grams of the product are created when 20 grams of one substance completely react with 30 grams of another.

Assuming we have the balanced chemical equation for the reaction, we can use stoichiometry to determine the amount of product formed.

let's say the balanced chemical equation for the reaction between the two compounds is: A + B -> C

where A and B are the two compounds and C is the product.

We can use the coefficients in the balanced equation to determine the mole ratio of A to B to C.

Let's assume that the mole ratio of A to B to C is 1:2:3.

Let's assume that the molar mass of compound A is 40 g/mol and the molar mass of compound B is 60 g/mol. Using these values, we can calculate the number of moles of each compound as:

moles of A = 20.00 g / 40 g/mol = 0.50 mol

moles of B = 30.00 g / 60 g/mol = 0.50 mol

Since the mole ratio of A to B to C is 1:2:3, we can see that 0.50 moles of A react with 1.00 mole of B to produce 1.50 moles of C.

To convert the moles of C to grams, we can use the molar mass of C. Let's assume that the molar mass of C is 80 g/mol. Using this value, we can calculate the mass of C formed as:

mass of C = 1.50 mol x 80 g/mol = 120 g

Learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ4

From largest to smallest atomic radius:

Francium>Cesium>Rubidium>Potassium>Sodium>Lithium>Calcium> Strontium>Barium>Aluminum>Praseodymium>Neon>Helium>Argon> Krypton>Xenon>Radon>Nitrogen.

The trend of atomic radii in a period (horizontal row) of the periodic table is generally a decrease from left to right. This is due to an increase in the effective nuclear charge, which is the positive charge felt by the outermost electrons in the atom. As the atomic number increases across a period, the number of protons in the nucleus increases, which increases the effective nuclear charge. This stronger attraction between the positively charged nucleus and the negatively charged electrons causes the atomic radius to decrease.

To know more about atomic radius, visit:

https://brainly.com/question/13607061

#SPJ1

None of the aforementioned choices are appropriate since moles per litre (mol/L) and moles per millilitre (mol/mL) are measures of concentration while metres (m) is a unit of length or distance.

The unit of concentration known as moles per litre (mol/L or M) is frequently used in chemistry. It expresses the quantity of a substance in moles that has dissolved in a litre of solution. The concentration of chemical solutions, including acids, bases, salts, and organic molecules, is frequently described using this unit. Because it offers a means of standardising a solution's concentration, the idea of moles per litre is crucial for enabling precise and repeatable measurements of reactants and products in chemical processes. By dividing the number of moles of solute by the volume of the solution in litres, one can determine the molar concentration of a solution.

Learn more about moles per litre here:

https://brainly.com/question/30169960

#SPJ4

At 100°C and 1 atm, an electrolyzed sample of water containing 0.75 mol would yield 11.2 L of oxygen gas.

A chemical reaction is triggered by an electric current being passed through a substance, typically an electrolyte, in the process known as electrolysis.

The water electrolysis chemical equation is as follows:

2H20(1)-> 2H2(g)+O2(g)

This demonstrates that we produce 1 mole of oxygen gas for every 2 moles of electrolyzed water. As a result, we can determine the amount of oxygen gas generated by dividing the number of moles of electrolyzed water by two:

moles of O2 = 0.75 mol H2O/moles of 2 = 0.375 mole of O2.

Now we can compute the volume of oxygen gas created at 100 °C and 1 atm using the ideal gas law. The ideal gas law is :

PV = nRT

where R is the ideal gas constant (0.08206 Latm/molK), P is the pressure, V is the volume, n is the number of moles of gas, T is the temperature in Kelvin, and n is the number of moles of gas.

The temperature must first be converted to Kelvin by adding 273.15:

T = 100°C + 273.15 = 373.15 K

The ideal gas law can now be rearranged to account for V:

V = nRT/P

When we enter the values, we have:

V is equal to 0.375 mol, 0.08206 Latm/molK, and 373.15 K. (1 atm)

When we solve for V, we get:

V = 11.2 L

Therefore, 11.2 L of oxygen gas at 100°C and 1 atm would be produced from a 0.75 mol water sample electrolyzed till all the liquid water is gone.

To know more about electrolysis, visit:

https://brainly.com/question/12054569

#SPJ1

In one mole of sodium carbonate, there are 2 moles of sodium , 6 moles of oxygen and 1 mole of C. Hence, in 1.25 moles of the compound, 2.5 moles of Na, 7.5 moles of O and 1.25 moles of C.

The molar mass of a compound  is the mass of one mole of the compound. One mole of any compound contains 6.02 × 10²³ atoms. This number is called Avogadro number.

2.  Convert 2.50 mol of Na2CO3 to mass in g.

Molar mass of sodium carbonate  = 106 g/mol

then, mass of 2.50 mol = 265 g.

3. Convert 5.50 g of Na2CO3 to mol.

Number of moles in 5.50 g of sodium carbonate = 5.50 g/ 106 = 0.051 moles.

4.Covert 5.50 g of Na2CO3 to number of particles

Now, one mole of sodium carbonate contains Avogadro number of atoms or molecules . Then number of particles in 5.50 g that is 0.051 moles is:

0.051 × 6.022 × 10²³ = 3.072 × 10²² particles.

Find more on Avogadro number:

https://brainly.com/question/24175158

#SPJ9

Answer:

Weak electrolyte

Explanation:

weak bases are ammonia (NH3), methylamine (CH3NH2), and ethylamine (C2H5NH2)

The term that describes the electrolyte capacity of methylamine (CH₃NH₂) which partially dissociates in water is Weak electrolyte.

Because it dissolves in water only partially into ions, methylamine (CH₃NH₂)  is a weak electrolyte. A small amount of electrical current can conduct when certain methylamine molecules split apart into ions CH₃NH₃⁺ and OH⁻ in a solution. Weak electrolytes have a moderate level of electrical conductivity compared to strong electrolytes which almost entirely dissociate into ions and non-electrolytes which do not dissociate.

This is because weak electrolytes exhibit intermediate conductivity due to their partial ionization. Understanding this behavior is crucial for understanding how solutions behave and how weak acids and bases like methylamine, affect chemical reactions.

To know more about electrolyte here

brainly.com/question/33930290

#SPJ2

Theoretical yield is the maximum amount of product that can be obtained from a given amount of reactant, assuming complete conversion of the reactant.

What do you mean by reactants?

Reactants are the substances that are involved in a chemical reaction. Reactants are typically made up of two or more elements or compounds that are combined to create a new substance, the product. Reactants are consumed in a reaction, and the product is what is left over after the reaction has taken place.

The theoretical yield of CO2 in grams is calculated using the following equation:

Mass (g) = Moles (mol) x Molar Mass (g/mol)

Mass (g) = 6.4 mol x 44.01 g/mol

Mass (g) = 281.264 g

Hence, the theoretical yield of CO2 in grams would be 281.264 g.

To know more about reactants,

https://brainly.com/question/26283409

#SPJ1

Yes, you can determine if the temperature inside a freezer is below 0°C by using a glass of liquid water. Here's how:

However, it is not possible to determine the exact temperature of the freezer by just using a glass of water. The temperature can only be estimated by observing the state of the water and making a rough guess based on the extent of the freezing.

For example, if the water is just starting to freeze, then the temperature could be close to 0°C. If the water has mostly frozen, then the temperature could be closer to -10°C. However, without a thermometer, the exact temperature cannot be determined.

To learn more about temperature refer this link

https://brainly.com/question/11384928

#SPJ4

Parts of the population were liberated from the need on food collecting and hunting as a result of the rivers' provision of an abundance of drinkable water and fertile land to start cultivating food crops.

For more information on local river and community development kindly visit to

https://brainly.com/question/886777

#SPJ1

The total mass of the concentration obtained (1.3012 g of NaCl + 0.5809 g of SiO2 + 0.4503 g of CaCO3) is 2.3324 g.

The mass of SiO2 recovered is 0.5809 g.
To calculate the percentage of SiO2 in the starting mixture, we divide the mass of SiO2 by the total mass of the mixture and multiply by 100:

(0.5809 g / 2.3816 g) x 100% = 24.4%

Therefore, the starting mixture was approximately 24.4% SiO2.
this assumes that the separation process was complete and all the SiO2 was recovered. In practice, there may be some loss of material during the separation process.the student started with a mixture of sand containing different components, and after separation, the mass of each component was determined. The percentage of SiO2 in the starting mixture can be calculated using the mass of SiO2 recovered and the initial mass of the mixture.

Learn more about concentration here:
https://brainly.com/question/27893112

#SPJ4