Anything made in the lab requires natural resources to produce it is the main problem with this idea.
The correct option is B.
What are some examples and resources?Anything that helps you live better and is practical is a resource. A "Resource" is any part of the natural world that is beneficial to humans, including things like oxygen, water, foods, plants, creatures, minerals, and metals.
What are the top ten natural resources?Stone, sand, metals, oil, coal, and natural gas are examples of natural resources. Other natural resources include things like air, sunlight, soil, and water. Natural resources include things like plants, fish, birds, and animals. The production of food, energy, and raw materials for the manufacture of commodities all depends on natural resources.
To know more about Resources visit:
https://brainly.com/question/28605667
#SPJ1
The complete question is -
A student states that natural resources could be saved if people made everything they need in labs. What is the main problem with this idea?(1 point)
a-The materials made in labs will still pollute the environment and destroy natural resources.
b-Anything made in the lab requires natural resources to produce it.
c-There are not enough synthetic resources yet to make what people need.
d-People might think it is fine to waste a lot of the materials since they just came from a lab.
7. Apply Scientific Reasoning
Hooke
and Van Leeuwenhoek made their discoveries
around the same time. More than 150 years
later, Schleiden, Schwann, and Virchow all
made breakthroughs within a few years of each
other. What are some possible reasons for the
sudden development of the cell theory after
such a long break?
The 150-year gap in the scientific discovery could be because many individuals believed the theory of spontaneous generation.
What is the theory of spontaneous generation?The theory of Spontaneous generation is a superseded scientific theory that held that living creatures could arise from nonliving matter and that such processes were commonplace and regular.
The theory of Spontaneous generation is incorrect and also obsolete. This theory was formulated by Aristotle.
The theory of Spontaneous generation aims to explain the seemingly sudden emergence of organisms such as rats, flies and maggots within rotting meat and other decomposable items by suggesting that organisms do not descend from other organisms or from a parent, and that only require that certain conditions in their environment be fulfilled in order for creation to occur.
Many scientist disapproved the theory of Spontaneous generation and made studies and experiments to that effect. Such scientist's includes persons like Francesco Redi, John Needham, Lazzaro Spallanzani and many more people.
Learn more about theory of Spontaneous generation at: https://brainly.com/question/15387713
#SPJ1
A patient is in the dental office to begin a preparation for veneers on teeth #6,#7,#8,#9, and #10. the dental assistant has set up the operatory for the procedure and has all the correct armamentarium ready to start the preparation. After reviewing the patients medical history, the dental assistant notices that the patient has had four heart surgeries. what changes should be made in the setup of this procedure and why
The changes which should be made in the setup of this procedure is the reduced lacing of the gingival retraction cords with racemic epinephrine.
Who is a Dentist?These are healthcare professionals who are trained and specialize in the care of the oral health of individuals.
In the Veneer preparations , a dental impression which has to be made which is the reason why gingival retraction cords with racemic epinephrine has to be used for effective results. Ina scenario where the patient has had four heart surgeries the the epinephrine should be reduced or other options used because it could increase heart pressure and lead to complications.
Read more about Dentist here https://brainly.com/question/18064460
#SPJ1
What is Conduction & Convection?
Answer:
Explanation:
conduction:he process by which heat or electricity is directly transmitted through a substance when there is a difference of temperature or of electrical potential between adjoining regions, without movement of the material.
convection:movement in a gas or liquid in which the warmer parts move up and the cooler parts move down
When writing a lab report where do your data tables belong
A. Conclusion
B. Materials
C. Purpose
D. Results
Answer:
Results or D.
Explanation:
I think it’s d. or results because normally that’s were I would put my information once I have my experiment done.
A chemist determines by measurements that 0.065 moles of nitrogen gas participate in a chemical reaction. Calculate the mass of nitrogen
gas that participates.
Round your answer to 2 significant digits.
X
5
The mass of nitrogen gas that participates is 0.00464.
What is mass?
"Mass is the quantity of matter of a physical body." The mole is a SI unit of measurement that is used to calculate the quantity of any substance.
The molar mass of many compounds can be calculated by dividing the mass of the compound by the number of moles of the compound.
The formula to calculate the mass
mass = moles / molar mass
Given, that the moles of nitrogen gas are 0.065 moles
The molar mass of nitrogen is 14
The mass of nitrogen is to be calculated.
Putting the values in the formula
0.065 / 14 = 0.00464
Therefore, the mass of nitrogen gas is 0.00464.
To learn more about mass, refer to the link:
https://brainly.com/question/20813336
#SPJ1
Explain why you think the IndoorAtlas is more accurate when there is more metal nearby.
The correct answer is :
The "signal" of the building is enhanced with more steel, which allows the technology to more precisely detect users. The technique used by IndoorAtlas is only effective inside.
Steel and concrete contribute to the distinctive magnetic fingerprints or signatures of structures, as the business notes on its website:
In a manner similar to how animals use the Earth's magnetic field, although on a smaller spatial scale, modern buildings with reinforced concrete and steel constructions contain distinct spatially variable ambient magnetic fields that can be used for locating. According to the path that is passed through a non-uniform ambient magnetic field, different magnetic field observations result.
To learn more about magnetic fingerprints refer the link:
https://brainly.com/question/24765445
#SPJ1
Six swordfish were swimming in the sea.
Alliteration
Allusion
Assonance
Hyperbole
Metaphor
Onomatopoeia
Oxymoron
Personification
Simil
Answer:
Alliteration
Hope this helps :)
Hope this helps :)Explanation below.
Explanation:
The word S is repeated many times in the sentence, so alliteration would be the correct answer.
If a car has an EPA mileage rating of 30 miles per gallon, what is this rating in
kilometers per liter? (1 L = 1.06 qt)
The rating in kilometers per liter is 12.75 kilometer per liter
How to convert 30 miles per gallon to kilometer per gallon1 mile per gallon = 1.60934 Kilometer per gallon
Therefore,
30 miles per gallon = 30 × 1.60934
30 miles per gallon = 48.2802 kilometer per gallon
How to convert 48.2802 kilometer per gallon to kilometer per liter1 kilometer per gallon = 0.264172 kilometer per liter
Therefore,
48.2802 kilometer per gallon = 48.2802 × 0.264172
48.2802 kilometer per gallon = 12.75 kilometer per liter
Thus, the rating in kilometer per liter is 12.75 kilometer per liter
Learn more about conversion:
https://brainly.com/question/1624880
#SPJ1
Diagram the energy changes that can take placA flask has a mass of 100.00 g when empty and 600.00 g when filled with water. When the same flask is filled with concentrated sulfuric acid, H2SO4, its mass is 1100.00 g. What is the density of concentrated sulfuric acid? (Assume water has a density of 1.00 g/cm3 at the temperature of the measurement.)
The density of sulfuric acid is 2 g/mL.
What is the density of the sulfuric acid?The density of the sulfuric acid is calculated as follows:
mass of empty flask = 100.0 g
mass of flask + water = 600.0 g
mass of water = 600 - 100
mass of water = 500.0 g
density of water = 1 g/mL
volume of water = mass/densityvolume of water = 500 g/1g/mL
Volume of water = 500 mL
Volume of water = volume of flaskVolume of flask = 500 mL
mass of flask + sulfuric acid = 1100. g
mass of sulfuric acid = 1100 - 100
mass of sulfuric acid = 1000 g
volume of sulfuric acid = 500 mL
Density of sulfuric acid = mass/volumedensity of sulfuric acid = 1000 g/ 500ml
Density of sulfuric acid = 2 g/mL
Learn more about density and volume at: https://brainly.com/question/952755
#SPJ1
What are the products of sodium bicarbonate and citric acid reacting? Write the balanced equation for the reaction.
Answer:
Equation - citric acid & sodium bicarbonate ACID + CARBONATE --> SALT + WATER + CARBON DIOXIDE CITRIC ACID + SODIUM BICARBONATE ----> SODIUM CITRATE + WATER + CARBON DIOXIDE In this reaction, the sodium BICARBONATE is mixed with citric acid.
Explanation:
Determine the mass in each of the following
1) 54 molecules of CO2 (MM = 44.0 g/mol)
2) 3.65 x 1024 molecules of water (MM = 18.0 g/mol)
The mass of a substance with given number of molecules can be calculated by first finding the number of moles in the substance as follows:
No. of moles = no of molecules ÷ Avogadro's number
Moles of carbon dioxide = 54 ÷ 6.02 × 10²³ = 8.97 × 10²³ molesMoles of water = 3.65 x 10²⁴ ÷ 6.02 × 10²³ = 0.61 molesMass of these substances can be calculated by multiplying the number of moles by their molar mass as follows:
Mass of carbon dioxide = 8.97 × 10²³ moles × 44 g/mol = 3.95 × 10²⁵ grams. Mass of water = 0.61 moles × 18 g/mol = 10.98 gramsLearn more about mass at: https://brainly.com/question/21042927
#SPJ1
Help me out with this chem problem please
Answer:
6.36 x 10²⁰ atoms
Explanation:
To find the number of atoms in the P₂O₅ sample, you need to (1) convert grams to moles (using the molar mass of P₂O₅) and then (2) convert moles to atoms (using Avogadro's number). It is important to arrange the conversions in a way that allows for the cancellation of units. The final answer should have 3 sig figs like the given value (0.150 g = 3 sig figs).
Atomic Mass (P) = 30.97 g/mol
Atomic Mass (O) = 16.00 g/mol
Molar Mass (P₂O₅): 2(30.97 g/mol) + 5(16.00 g/mol)
Molar Mass (P₂O₅): 141.94 g/mol
Avogadro's Number:
6.022 x 10²³ atoms = 1 mole
0.150 g P₂O₅ 1 mole 6.022 x 10²³ atoms
----------------------- x ---------------- x ------------------------------- = 6.36 x 10²⁰ atoms
141.94 g 1 mole
What is the electron configuration for 1s22s22p63s2
Answer:
its atomic no is 12
Explanation:
name = MAGNESIUM
a 175 lb patient is to under go surgery and will be given an anesthetic intravenously. The safe dosage is 12 mg/kg of body weight. Determine the maximum dose of anesthetic that should be used
Taking into account the rule of three, the maximum dose of anesthetic that should be used is 952.5444 mg.
Rule of threeThe rule of three is a way of solving problems of proportionality between three known values and an unknown value, establishing a relationship of proportionality between all of them.
If the relationship between the magnitudes is direct, the direct rule of three must be applied using the following formula, being a, b and c known data and x the variable to be calculated:
a ⇒ b
c ⇒ x
So: x=(c×b)÷a
Maximum dose of anesthetic
In this case, you know:
Body weight= 175 lb= 79.3787 kg (being 1 lb= 0.453592 kg)Safe dosage= 12 mg/kg of body weightYou can apply the following rule of three: if for 1 kg of body weight 12 mg should be supplied, for 79.3787 kg of body weight, how much anesthetic should be supplied?
1 kg ⇒ 12 mg
79.3787 kg ⇒ x
So: x=(79.3787 kg× 12 mg)÷ 1 kg
Solving:
x= 952.5444 mg
In summary, the maximum dose of anesthetic that should be used is 952.5444 mg.
Learn more with this example:
brainly.com/question/12482948
#SPJ1
Suppose a popular FM radio station broadcasts radio waves with a frequency of 90. MHz. Calculate the wavelength of these radio waves.
The wavelength of the radio waves is 3.33 m
What is wavelength?This is simply defined as the distance between two successive crests or trough
Relationships between frequency, wavelength and velocityThe velocity, frequency and wavelength of a wave are related according to the following equation
Velocity (v) = wavelength (λ) × frequency (f)
v = λf
How to determine the wavelengthThe wavelength of the radio wave can be obtained as illustrated below:
Frequency of radio wave (f) = 90 MHz = 90×10⁶ Hz Velocity of radio wave (v) = 3×10⁸ m/sWavelength of radio wave (λ) =?λ = v /f
λ = 3×10⁸ / 90×10⁶
λ = 3.33 m
Learn more about wave:
https://brainly.com/question/14630790
#SPJ1
Pls help its urgent?What is the relationship between KMT and Sea Level Rise?
CER format
3-4 sentences
The relationship between KMT and sea level rise is 760 nm as the sea level rises because the gas level is increasing.
KMT is described as the behavior of gases and also it is used to explain the macroscopic properties of a gas such as pressure and temperature.
Sea level rise is an increase in the level of the world oceans due to the effects of global warming and burning fossil fuels is one of the causes of global warming because it releases carbon dioxide and other heat-trapped gasses into the atmosphere.
So, the relationship between kinetic molecular theory (KMT) and sea level rise is the distance between sea level and KMT which is 760nm as the sea level is rising because the gas level is increasing.
To learn more about KMT and sea level rise, visit: https://brainly.com/question/507944
#SPJ1
Naphthalene (mothballs) is a substance that is not soluble in water and
Is easily sublimed. Potassium bromide is a substance that is soluble in water and does not sublime. Describe two methods by which we can separate these two components of a mixture.
Potassium bromide is a substance that is soluble in the water and does not sublime. We can separate these two components of a mixture by heat.
What is sublimation?Sublimation is a phase change process where solid material directly changes into a gas material. In this kind of phase change, solid material does not undergo a liquid state. At normal pressures, we usually do not observe sublimation unless the pressure is low enough that liquid states of substance cannot exist at these pressures.
In order to separate naphthalene from the mixture, we can heat up the mixture gently in order to boil away the naphthalene. Since we will be dealing with vapor product here, we will need a special enclosed container that can capture the naphthalene vapors. Once captured, these vapors can become solid again but now separated from initial mixture.
Another way is, put it in a beaker. Use a smaller beaker filled half way with ice and water and place in larger one. It should be about an inch or two above mixture. Heat over a Bunsen burner and naphthalene will deposit on the bottom of smaller beaker. And in this way, naphthalene be separated from mixture of KBr and sand.
To know more about naphthalene visit: https://brainly.com/question/23779998
#SPJ9
5) What is the temperature (in Kelvin) and pressure (in kPa) at STP?
An absolute pressure of precisely 105 Pa and a temperature of 273.15 K (0 °C, 32 °F) are considered to be STP (100 kPa, 1 bar).
Relation between temperature and pressure :The temperature at a given volume is directly proportional to the pressure of given quantity of that gas. A system's pressure increases as its temperature rises and vice versa. The Gay-law Lussac's establishes the relationship between pressure and temperature of a gas.
How does temperature affect pressure?The average kinetic energy of the gas's molecules directly relates to its temperature. Faster moving particles will more frequently and violently collide with the container walls. Because of this, the force acting on the container's walls increases, increasing the pressure.
To know more about kinetic energy :
https://brainly.com/question/12669551
#SPJ9
< Question 17 of 35 >
Macmillan Learning
Name the alkene. Be sure to indicate stereochemistry and use hyphens (-) not endashes (-).
H3C-CH₂
CH3
H
c=c
H
The alkene is named:
The name of the given chemical in IUPAC is 3-5-ethyl5-3-methylheptane.
What is a cyclic alkene?A cycloalkene, also known as a cycloolefin, is a form of alkene hydrocarbon that lacks the aromatic quality and possesses a closed ring of carbon atoms as well as one or more double bonds.
a functional group with a carbon-carbon double bond as its defining feature. When the carbon-carbon double bond is completely enclosed by another functional group, such as a benzene ring, we do not refer to the more intricate functional group as an alkene. basic alkene structure
Alkenes are a popular class of hydrocarbons that are present in crude oil. At least one carbon-carbon double bond exists in this family. The chemistry of the family's compounds is significantly altered by this double bond.
learn more about cyclic alkene refer
https://brainly.com/question/23847406
#SPJ4
at lunch mr kaufman measured the volume of his 12 oz. soda before he drink it to be 14 oz
An atom of an element contains 20 protons and 21 neutrons. Which of these is true of the element?
it is a noble gas
it is a transition element
it is a nonmetal
it is an alkaline earth metal
Answer:
It is an Alkaline earth metal
Explanation:
20 protons meaning the element is 20 on the periodic table-Calcium.
The number of neutrons does not matter
Calcium is not a noble gas, transition metal, and nonmetal.
Calcium is in the 2nd group meaning it is an alkaline earth metal.
Which of the following structures can differentiate between plant and animal cells
Calculate the volume of concentrated aqueous HCI, having a density of 1.188 g/ml
and containing 38% HCI by weight, needed to prepare 2 liters of a 0.20 N hydrochloric acid solution.
According to the given statement the volume of concentrated aqueous HCI is V (ml) = 32.3 ml
What use do hydrochloric acids ?In the food, textile, metal, and rubber sectors, Hydrochloric acid (HCl) is frequently employed as a bleaching agent to neutralize alkaline substances. It is neutralized when released into the environment, and it immediately hydrolyzes when it comes into contact with water.
Briefing:The molecular weight of HCl = 36.461
The valence (n) of hydrogen = 1
Equation 1:
Weight of HCl needed = 0.20 eq/L * 2.0 L * 36.461 g/eq
Rewriting the equation:
Weight of HCl needed
= 0.20 eq /1000ml * 2000 ml * 36.461 grams/eq
Weight = 14.5844 grams
The weight of HCl is related its current diluted volume by the equation:
Equation 2:
Weight =V(ml) * 1.188grams * 0.38/ml
Combining eq 1 and eq 2 us eq 3
Equation 3:
14.5844 grams
=V (ml) * 1.188 grams * 0.38/millilitres
Solving for V (ml):
V (ml)
= 14.5844 grams * ml/1.188 grams * 0.38
Rounding off and Cancelling out units,
V (ml) = 32.3 ml
To know more about Hydrochloric acid visit:
https://brainly.com/question/15231576
#SPJ9
A 50.00mL sample of solution containing Fe^2+ ions is titrated with a 0.0216 M KMnO4 solution. It required 20.62mL of KMnO4 solution to oxidize all the Fe^2+ ions to Fe^3+ ions by reaction.
MnO4- (aq) + Fe^2+ (aq) ------> Mn^2+ (aq) + Fe^3+ (aq) (unbalanced)
acidic
a.) What was the concentration of Fe^2+ ions in the sample solution?
b.) What volume of 0.0150 M K2Cr2O7 solution would it take to do the same titration? The reaction is
Cr2O7^2- (aq) + Fe^2+ (aq) ---------> Cr^3+ (aq) + Fe^3+ (aq) (unbalanced)
acidic
The concentration of Fe[tex]^+2[/tex] ions is 0.0088 M, and 29.33 L of K₂Cr₂O₇ is required for the titration.
How to calculate concentration of solution?Concentration of a titrand when volume is given can be calculated as,
M₁V₁=M₂V₂
Likewise volume of titrand can also be calculated by the same formula.
In the given problem, concentration of KMnO₄ =0.0216 M and it's volume=20.62 ml or 0.0206 L, volume of Fe[tex]^+2[/tex] ions=50 ml or 0.05 L
substituting the values in the formula,
M₁=0.0216×0.0206/0.05=0.0088 M.
For calculating the volume of potassium dichromate using the same formula ,
V₂=0.0088×0.05/0.015=0.02933 ml or 29.33 L.
Thus, the concentration of iron(II) ions in sample is 0.0088 M and 29.33 L of 0.015 M potassium dichromate is used for doing the same titration.
To know more about molar concentrations click here:
https://brainly.com/question/21841645
#SPJ1
The grams of fat in one avocado that has 375 kcal, 17g of carbohydrates, and 3g of protein?
Answer: Six grams
Explanation: The avocado has a high-fat content, but it is only half the fat content of other fruits and vegetables. One avocado has about six grams of fat.
A student is creating an art design using a right triangle. What transformation would describe the relationship between Triangle A and Triangle B?
A transformation which would describe the relationship between Triangle A and Triangle B is: C. reflection.
The types of transformation.Generally, there are different types of transformation and these include the following:
RotationTranslationDilationReflectionWhat is a reflection?A reflection can be defined as a type of transformation which moves every point of the object by producing a flipped but mirror image of the geometric figure.
In this context, we can reasonably infer and logically deduce that a transformation which would describe the relationship between Triangle A and Triangle B is reflection because they are both mirror image of one another.
Read more on reflection here: brainly.com/question/17419359
#SPJ1
Complete Question:
What transformation would describe the relationship between Triangle A and Triangle B?
a. rotation
b. dilation
c. reflection
d. slide
What mass in grams of tin would be required to completely react with
1.50 L of 0.750 M HBr in the following chemical reaction?
Sn(s) + 4 HBr(aq) - SnBr (aq) + 2 H₂ (g)
Mass in grams of tin would be required to completely react with 1.50 L of 0.750 M HBr in the following chemical reaction is 36.19g
Mass in gram is the amount of that compound that has the same mass in grams as the formula mass in atomic mass unit
Here given reaction is
Sn + 4HBr → SnBr + 2H₂
Mole of HBr = 1.50L × 0.750 M
= 1.125 mol
From balanced equation 4 mole of HBr react completely with one mole of tin to form the said product
Therefore, 1.125mole of HBr react completely with 1/4×1.125= 0.2812 mole of tin to form the said product
Molar mass of ton is 118.71g/mol
Mass of tin required = 0.2812×118.71
36.19g
Know more about gram
https://brainly.com/question/15701108
#SPJ1
You have 30.33 g of limestone that decomposes by heat to give 25.53 g of solid calcium oxide and some amount of carbon dioxide gas. Predict the mass of carbon dioxide gas that must be produced.
The mass of carbon dioxide gas that must be produced is 1.6 grams.
What is carbon dioxide?Carbon dioxide is a gas that is made up of carbon and oxygen.
Given, that the mass of limestone is 30.33 g
The mass of solid calcium oxide is 25.53 g
The molar mass of 56.0774 g/MOL
The number of moles = 25.53 / 56.0774 = 0.4552 mol
The mass of carbon dioxide will be
Say you have 1 mole of CO2.
The molar mass of CO2 is the mass of 1 mole of carbon atoms, i.e. 12 grams plus the mass of 2 moles of oxygen atoms,
16 × 2 = 32 grams.
Thus, the mass of carbon dioxide is 1.6 grams.
To learn more about carbon dioxide, refer to the link:
https://brainly.com/question/22630757
#SPJ1
this model represents an atom and it parts. label the parts of an atom
Answer:
Pls attach the picture for labelling.
Generally parts of an atom are:
1) Protons (+)
2) Neutrons (neutral)
Protons and neutrons are present in the nucleus
3) Electrons (-)
Explain the relationship between heat and thermal energy.
Answer:
Thermal energy gives the total kinetic energy the system possesses. It is used to determine the internal energy of a system.
Heat is the flow of thermal energy between two objects of different temperature.
Explanation:
Lots of good info out there on this - search, read, and enjoy :)
