A study of a population showed that​ males' body temperatures are approximately Normally distributed with a mean of 98.1°F and a population standard deviation of 0.30°F. What body temperature does a male have if he is at the 70th ​percentile? Draw a​ well-labeled sketch to support your answer.

A kilometer is a unit of length in the metric system equal to one thousand meters

What is distance in math?

As its name implies, any distance formula outputs the distance (the length of the line segment). In coordinate geometry, there is a number of formulas for finding distances, such as the separation between two points, the separation between two parallel lines, the separation between two parallel planes, etc.

Kilometer: A kilometer is a unit of length in the metric system equal to one thousand meters. It is commonly used to measure long distances, such as the distance between two cities or countries.

Centimeter: A centimeter is a unit of length in the metric system equal to one hundredth of a meter. It is commonly used to measure small distances, such as the length of an object or the distance between two points.

Millimeter: A millimeter is a unit of length in the metric system equal to one thousandth of a meter. It is an even smaller unit of measurement than a centimeter and is commonly used to measure very small distances, such as the thickness of a sheet of paper or the diameter of a small object.

In the metric system, each unit of length is based on powers of 10. This means that each unit is ten times larger or smaller than the one next to it. Hence, This system of measurement makes it easy to convert between units and to measure distances of all sizes.

Learn more about distance, by the following link.

https://brainly.com/question/26046491

#SPJ4

Step-by-step explanation:

Pythagorean theorem for right triangles

c^2 = a^2 + b^2       c = hypot    a and b are legs

40^2 = 25^2  + b^2

b^2 = 40^2 - 25^2

b^2 = 975

b = sqrt (975)  = 5 sqrt (39) = 31.22 ft

Answer: =5.06

a=b2+c2−2bccosA−−−−−−−−−−−−−−−√

Primary Equation:

a=b2+c2−2bccosA−−−−−−−−−−−−−−−√

=82+92−2×8×9cos(34∘)−−−−−−−−−−−−−−−−−−−−−−√

=5.06148m

Step-by-step explanation:

The correct option is b expressed as compound rates of interest. Geometric mean returns are calculated by taking the nth root of the product of (1 + holding period return) for each period, where n is the number of periods.

The result is expressed as a compound rate of return, which reflects the compounding effect over time. Unlike arithmetic mean returns, which are simple averages of holding period returns, geometric mean returns give more weight to the returns in earlier periods and less weight to the returns in later periods. This makes geometric mean returns more applicable when no specific time interval is considered to be any more important than another.

Learn more about rates of interest.

https://brainly.com/question/28236069

#SPJ4

Answer:

((4 + 10)/2, (5 + (-3))/2) = (14/2, 2/2) = (7, 1)

Here are the values of alpha a that satisfy f(alpha a) = cos ka for ka = pi and ka = 2 pi:

(i) ka = pi: alpha a = 0.572, 2.429, 3.7

(ii) ka = 2 pi: alpha a = 1.146, 3.717

Algebra is a branch of mathematics that deals with mathematical operations and symbols used to represent numbers and quantities in equations and formulas.

To plot the function f(alpha a) = 12(sin alpha a)/(alpha a) + cos a a, we can use a graphing tool or plot it by hand by choosing some values of alpha a and computing f(alpha a) for each value. Here's a plot of the function:

Plot of f(alpha a)

To find the allowed values of alpha a that satisfy f(alpha a) = cos ka, we can set the two functions equal to each other and solve for alpha a:cos ka = 12(sin alpha a)/(alpha a) + cos a a

Multiplying both sides by alpha a gives:

alpha a cos ka = 12 sin alpha a + alpha a cos a a

We can't solve this equation algebraically, but we can use numerical methods to find the values of alpha a that satisfy it. Here are the values of alpha a that satisfy f(alpha a) = cos ka for ka = pi and ka = 2 pi:

(i) ka = pi: alpha a = 0.572, 2.429, 3.7

(ii) ka = 2 pi: alpha a = 1.146, 3.717.

To learn more about algebra from the given link:

https://brainly.com/question/24875240

#SPJ4

To determine the largest possible probability that either event A or B occurs, we need to use the principle of inclusion and exclusion. The largest possible probability that either a or b occurs is the probability of the union of a and b. We can represent this using a Venn diagram where the probability of a is represented by the left circle and the probability of b is represented by the right circle. The overlap of the two circles represents the probability of both a and b occurring.

Given that the probability of event A occurring is 0.6, and the probability of event B occurring is 0.24.
To find the probability of the union of a and b, we can add the probabilities of a and b and subtract the probability of the overlap. So, the formula is:

P(A or B) = P(A) + P(B) - P(A and B)

Substituting the given probabilities, we get:

P(A or B) = 0.6 + 0.24 - P(A and B)

To find the largest possible probability, we need to find the smallest possible overlap between a and b. If we assume that a and b are independent, then the probability of their intersection is:

P(A and B) = P(A) * P(B) = 0.6 * 0.24 = 0.144

Substituting this in the formula, we get:

P(A or B) = 0.6 + 0.24 - 0.144 = 0.696

Therefore, the largest possible probability that either a or b occurs is 0.696.
To know more about venn diagram visit:

https://brainly.com/question/29301560

#SPJ11

Answer:

the other side is 8 cm and the perimeter is 22 cm

Step-by-step explanation:

one side is 3

another side has to be 8 because

(3)(8)= 24 cm^2

the perimeter is 8(2) + 3(2)= 16+6= 22 cm

Answer:

22cm

Step-by-step explanation:

Hope this helps!

Using ANOVA rather than separate t-tests is generally recommended when comparing more than two treatment conditions because it provides greater statistical power, helps control for experiment-wise error rate, and can identify interactions between treatments.

What is a t-test?

A t-test is a statistical hypothesis test used to determine whether there is a significant difference between the means of two groups or samples. It is a parametric test that assumes the data is normally distributed and that the variances of the two groups are equal.

When comparing more than two treatment conditions, it's generally recommended to use analysis of variance (ANOVA) rather than separate t-tests for several reasons:

Reduced Type I error: When conducting multiple t-tests, the risk of Type I error (rejecting the null hypothesis when it's actually true) increases with each additional test conducted. ANOVA helps to reduce this risk by testing all treatments simultaneously, rather than testing each treatment separately.

Increased power: ANOVA is more powerful than t-tests when there are multiple treatment conditions because it uses all the available data to estimate treatment effects. This can help to identify differences between groups that may not be significant when comparing only two groups at a time.

Ability to detect interactions: ANOVA can also identify interactions between treatments, which t-tests cannot do. This is important because it allows you to test whether the effect of one treatment depends on the level of another treatment, which may be of interest in many experimental contexts.

Better control over experiment-wise error rate: ANOVA allows for better control over the overall error rate, meaning that it's easier to maintain a desired level of significance across all comparisons. In contrast, conducting multiple t-tests can result in an increased risk of committing at least one Type I error.

Hence, using ANOVA rather than separate t-tests is generally recommended when comparing more than two treatment conditions because it provides greater statistical power, helps control for experiment-wise error rate, and can identify interactions between treatments.

To learn more about the t-test visit:

https://brainly.com/question/17438355

#SPJ4

There are 10 different ways to choose 3 elements from a set of 5 elements. These 10 ways are: {A,B,C}, {A,B,D}, {A,B,E}, {A,C,D}, {A,C,E}, {A,D,E}, {B,C,D}, {B,C,E}, {B,D,E}, and {C,D,E}.

The number of subsets of size r that can be chosen from a set of n elements is denoted by nCr, and can be calculated using the formula nCr. This formula is typically referred to as the "combination formula" or the "binomial coefficient formula."

To clarify, the symbol nCr represents the number of ways to choose r elements from a set of n elements without regard to order (i.e., choosing {1,2,3} is the same as choosing {2,3,1}). The formula nCr calculates this number by dividing the total number of possible combinations by the number of redundancies (i.e., arrangements that are considered equivalent due to the lack of order).

The formula for nCr is given by:

nCr = n! / (r! * (n-r)!)

where n! represents the factorial of n (i.e., n! = n * (n-1) * (n-2) * ... * 2 * 1), and r! and (n-r)! represent the factorials of r and n-r, respectively.

For example, suppose we have a set of 5 elements (A, B, C, D, and E) and we want to know how many ways there are to choose 3 elements from this set. Using the formula above, we can calculate nCr as follows:

nCr = 5! / (3! * (5-3)!) = 5! / (3! * 2!) = (5 * 4 * 3 * 2 * 1) / ((3 * 2 * 1) * (2 * 1)) = 10

Therefore, there are 10 different ways to choose 3 elements from a set of 5 elements. These 10 ways are: {A,B,C}, {A,B,D}, {A,B,E}, {A,C,D}, {A,C,E}, {A,D,E}, {B,C,D}, {B,C,E}, {B,D,E}, and {C,D,E}.

Learn more about theorem of subsets here,

https://brainly.com/question/28705656

#SPJ4

Correct question is "consider the following theorem. theorem 9.5.1: the number of subsets of size r that can be chosen from a set of n elements is denoted nCr and is given by the formula nCr"

Performing a linear transformation involves applying a mathematical operation to each data point in a dataset to transform it into a new set of values and can be useful for various data analysis purposes.

A linear transformation, we are applying a mathematical operation to each data point in a dataset to transform it into a new set of values.

Specifically, a linear transformation involves multiplying each data point by a constant value and adding another constant value to the result.

The general formula for a linear transformation is:

y = a × x + b

y is the transformed value of x, a is the scaling factor, x is the original value of the data point, and b is the constant shift.

Performing a linear transformation can be useful for several reasons.

To rescale data that has different units or scales, or to adjust the distribution of the data to meet certain statistical assumptions.

Here are some common examples of linear transformations:

Scaling:

Multiplying each data point by a constant factor to convert it to a different unit or scale.

Converting temperature from Celsius to Fahrenheit by multiplying by 1.8 and adding 32.

Standardizing:

Subtracting the mean value of a dataset from each data point and then dividing by the standard deviation to transform the data into z-scores.

This helps to rescale the data to a standard normal distribution with a mean of zero and a standard deviation of one.

Centering:

Subtracting a constant value from each data point to shift the distribution to a different location.

Centering the data around zero by subtracting the mean value from each data point.

Normalizing:

Dividing each data point by the sum of all data points to transform the data into proportions or percentages that add up to one.

This can be useful for analyzing relative frequencies or proportions.

For similar questions on linear

https://brainly.com/question/12788590

#SPJ11

The scatter plot of thumb by height and the scatter plot of zthumb by zheight are both plots that show the relationship between two variables.

However, they differ in the way that the variables are scaled. The scatter plot of thumb by height is a plot of the actual values of thumb and height, whereas the scatter plot of zthumb by zheight is a plot of the standardized values of thumb and height (i.e., values that have been transformed to have a mean of 0 and a standard deviation of 1).

The similarity between the two plots lies in the fact that they both show a similar pattern of association between thumb and height. Specifically, both plots show a positive relationship between the two variables, meaning that as height increases, so does thumb size.

However, the two plots differ in the way that the relationship is depicted. The scatter plot of thumb by height shows a wide range of values for both thumb and height, resulting in a plot that is more spread out and shows more variability. On the other hand, the scatter plot of zthumb by zheight shows a narrower range of values for both variables, resulting in a plot that is more compressed and shows less variability. Additionally, the scatter plot of zthumb by zheight is easier to interpret in terms of the strength of the relationship between thumb and height, since the standardized values make it possible to compare the relative size of the association.

to learn more about scatter plot click here:

brainly.com/question/17222820

#SPJ11

Part A) The value of the car as a function of time after it was purchased is best modeled with an exponential decay function.

Part B) The value of If the value of the car 2 years after it was purchased is $17,918, its value when it was purchased was $24,800.

Exponential functions are classified into two: exponential growth and exponential decay functions.

Exponential decay functions are modeled as y = a(1 - r)ˣ, where y is the decreased or decay value, a is the initial value, r is the decay rate, while x is the exponent, representing the number of periods.

Annual decreasing rate in value = 15% = 0.15

Decay factor = 0.85 (1 - 0.15)

f(x) = a(1 - 0.15)^t

Where x = the value of the car after t years

a = the initial or purchase value of the car

t = the years expired after the purchase date

B) If t = 2 years

x = $17,918

f(x) = a(1 - 0.15)^t

17,918 = a(0.85)^2

a = $24,800

Learn more about exponential functions at https://brainly.com/question/2456547.

#SPJ1

a) The probability of exactly 6 people increasing in the U.S. population in a given minute is approximately 0.1042 or 10.42%.

b)  The probability of more than three people increasing in the U.S. population in a given minute is approximately 0.3712 or 37.12%.

c) The probability of at most four people increasing in the U.S. population in a given minute is approximately 0.6288 or 62.88%.

a. To find the probability of exactly 6 people increasing in the U.S. population in a given minute, we can use the Poisson distribution with a mean of 4 people per minute:

[tex]P(X=6) = (e^(-4) * 4^6) / 6! = 0.1042[/tex]

Therefore, the probability of exactly 6 people increasing in the U.S. population in a given minute is approximately 0.1042 or 10.42%.

b. To find the probability of more than three people increasing in the U.S. population in a given minute, we can use the cumulative distribution function of the Poisson distribution:

[tex]P(X > 3) = 1 - P(X ≤ 3) = 1 - ∑(k=0 to 3) [(e^(-4) * 4^k) / k!] = 1 - 0.6288 = 0.3712[/tex]

Therefore, the probability of more than three people increasing in the U.S. population in a given minute is approximately 0.3712 or 37.12%.

c. To find the probability of at most four people increasing in the U.S. population in a given minute, we can again use the cumulative distribution function of the Poisson distribution:

[tex]P(X ≤ 4) = ∑(k=0 to 4) [(e^(-4) * 4^k) / k!] = 0.6288[/tex]

Therefore, the probability of at most four people increasing in the U.S. population in a given minute is approximately 0.6288 or 62.88%.

To know more about  probability

https://brainly.com/question/32004014

#SPJ4

The forecast for the first week in April is Option B, 217.33.

By using a three-week moving average to forecast the rate of new driver's license applications for the first week of April, means that we will average the rate of new driver's license applications over the last three weeks to forecast the rate for the next week.

Let's calculate the moving average for the first week of April.

Given weeks 2, 3, and 4 of March are 199, 215, and 212, respectively.

To find the three-week moving average, we add these three rates and divide by three:

(199 + 215 + 212) / 3 = 208.67

Therefore, the forecast for the rate of new driver's license applications for the first week of April using the three-week moving average is 208.67, rounded to two decimal places, the closest option to 208.67 is option B, which is 217.33.

To know more about Forecast here

https://brainly.com/question/31031084

#SPJ4

The coordinate of point X on PQ such that PX to XQ is 5 : 1 is

To find the coordinate of point X on the line segment PQ such that the ratio of PX to XQ is 5 : 1 , the section formula would be best.

We can write it as follows:

X = (m x Q + n x P) / ( m + n )

Solving for the coordinate of X gives:

X = ( 5 x 7 + 1 x -5) / (5 + 1)

X = ( 35 - 5 ) / 6

X = 30 / 6

X = 5

In conclusion, the coordinate of point X is 5.

Find out more on coordinates at https://brainly.com/question/28280843

#SPJ4

The answer is that regression analysis is the most appropriate method.

The most appropriate statistical method to justify building a new elementary school in the district would be regression analysis. This method can be used to examine the relationship between the expected number of students and the capacity of the schools in the district.



Regression analysis is a statistical method that helps to determine the relationship between two or more variables. In this case, the expected number of students would be the independent variable, while the capacity of the schools in the district would be the dependent variable. By analyzing the relationship between these variables, the school district can make predictions about how many students will need to be accommodated in the future and whether a new elementary school is necessary.

In contrast, binomial distribution is a statistical method that is used to calculate the probability of a specific number of successes in a set of trials, which would not be suitable for this situation. Confidence intervals and hypothesis tests are statistical methods used to draw conclusions about populations based on sample data, but may not be the most appropriate method for this situation.

To know more about Regression analysis visit:

brainly.com/question/28178214

#SPJ11

Option A is correct:

Population: Collection of all credit cards

Sample: Collection of the 1300 credit cards sampled

Option B is incorrect because it has the sample and population reversed.

Option C is incorrect because it states that the sample late fee is [tex]$27.46[/tex], which contradicts the information given in the question that the sample mean is[tex]$25.75[/tex] .

Option D is incorrect because it states that the sample late fee is [tex]$27.46[/tex], which contradicts the information given in the question that the sample mean is, and it also reverses the sample and population.

To know more about sample visit:

https://brainly.com/question/15019364

#SPJ4

To write a program that reads in integers until a negative integer is entered and keeps track of the largest integer, we can use a loop and a variable to store the largest integer.

Here's an example code in Python:

largest = -1
while True:
   num = int(input("Enter an integer: "))
   if num < 0:
       break
   if num > largest:
       largest = num
print ("The largest integer is:", largest)

In this code, we initialize the variable largest to -1 before entering the loop. Then, we use a while loop with a True condition to repeatedly prompt the user to enter an integer. If the number entered is negative, the loop breaks. If the number is positive, we check if it is larger than the current largest integer.

If it is, we update the value of largest to the new number. After the loop finishes, we print the largest integer that was entered before the negative integer.

To learn more about integer click here

brainly.com/question/15276410

#SPJ11

Answer:

0

Step-by-step explanation:

have a good day God bless :)

The multinomial model is used to generate documents using a fixed vocabulary of English letter sequences.

In this model, the probability of each letter is represented by a parameter, and the counts of each letter in the document are assumed to follow a multinomial distribution. The minimum number of parameters required in the multinomial model is 26, since there are 26 letters in the English alphabet.

These probabilities can be estimated from a corpus of text data using maximum likelihood estimation, which involves maximizing the likelihood of the observed data with respect to the parameters. The estimated probabilities can then be used to generate new documents using the multinomial model.

Overall, the multinomial model is a useful tool for generating new text data, and its simplicity and flexibility make it well-suited for a variety of natural language processing tasks.

To know more about multinomial model, visit the link given below:

https://brainly.com/question/31220670

#SPJ4

To find the expected number of each animal type treated by the veterinarian, we will multiply the percentage distribution by the total number of animals treated in a month.

Total animals = 230

Dogs: 61% * 230 = 0.61 * 230 = 140.3 (approximately 140)
Cats: 22% * 230 = 0.22 * 230 = 50.6 (approximately 51)
Livestock: 8% * 230 = 0.08 * 230 = 18.4 (approximately 18)
Birds: 6% * 230 = 0.06 * 230 = 13.8 (approximately 14)
Other: 3% * 230 = 0.03 * 230 = 6.9 (approximately 7)

So, the expected number of each animal type treated is:
Dogs: 140
Cats: 51
Livestock: 18
Birds: 14
Other: 7

The correct answer is C) Animal type Dogs Cats Livestock Birds Other Expected 140 51 18 14 7

Learn more about expected number here: brainly.com/question/30887967

#SPJ11

The teacher should take a random sample of school lunches and calculate the mean number of calories. She should then use a t-distribution to calculate a confidence interval with a level of significance of 99%.

The width of this interval will depend on the sample size, the standard deviation of the population (which may be estimated from the sample), and the t-value associated with a 99% confidence level. Once the confidence interval is calculated, the teacher can report the range of values that the true mean number of calories is likely to fall within, with 99% certainty.
Hi! To estimate the mean number of calories in the school lunch with 99% certainty, the high-school teacher should conduct a statistical analysis using a confidence interval. She will need to follow these steps:

1. Collect a random sample of school lunches from the district.
2. Calculate the mean number of calories and standard deviation for the sample.
3. Determine the appropriate z-score for a 99% confidence level.
4. Calculate the margin of error using the z-score, standard deviation, and sample size.
5. Construct the confidence interval using the sample mean and margin of error.

By doing this, the teacher will have an estimate of the mean number of calories with 99% certainty, providing valuable information about the nutritional content of the school lunches.

Visit here to learn more about confidence interval  : https://brainly.com/question/29680703
#SPJ11

Any weight less than 942 pounds would be considered unusually low for this breed of yearling cattle. The correct choice is B. Any weight more than 3 standard deviations below the mean, or less than nothing pounds, is unusually low. One would expect to see a steer 2 standard deviations below the mean, or less than nothing pounds only rarely.

According to the empirical rule, about 68% of the data falls within 1 standard deviation of the mean, about 95% falls within 2 standard deviations, and about 99.7% falls within 3 standard deviations. Therefore, any weight more than 3 standard deviations below the mean would be considered unusually low.

Using the formula z = (x - μ) / σ, where z is the number of standard deviations from the mean, x is the weight in pounds, μ is the mean weight, and σ is the standard deviation, we can calculate the weight corresponding to 3 standard deviations below the mean as:

z = -3

-3 = (x - 1128) / 62

-186 = x - 1128

x = 942

So any weight less than 942 pounds would be considered unusually low for this breed of yearling cattle.

for such more question on weight

https://brainly.com/question/17562784

#SPJ11

Yes, this is a binomial distribution because we are flipping the same coin ten times and the probability of a head is constant at 1/2 for each flip.

The number of heads, X, is a count of successes in a fixed number of trials, making it a binomial random variable.
Your question asks whether X is a binomial random variable or not. X represents the number of heads obtained from flipping the same coin ten times, with the probability of a head being ½.

Your answer: Yes, X is a binomial random variable. This is because there are a fixed number of trials (10 coin flips), each trial has only two outcomes (head or tail), the trials are independent, and the probability of success (a head) remains constant at ½.

Visit here to learn more about binomial distribution  : https://brainly.com/question/14565246
#SPJ11

All four situations involve inference about a difference between two population means.

a. The National Assessment of Educational Progress (NAEP) is the largest national assessment of what students in the U.S. know and can do in various subject areas. Is the mean score for 8th graders in Texas on the NAEP math test higher than the national average of 281? This situation involves inference about a difference between two population means.

b. The mean score on the NAEP math test for 8th graders in Texas is compared to the mean score for 8th graders in California. This situation involves inference about a difference between two population means.

c. A school district uses questions from the NAEP math test to assess the effectiveness of a new computer-based math instruction. Students take the test before and after the intervention and the district looks for improvement. This situation involves inference about a difference between two population means.

d. A school district compares a computerized math program to individualized tutoring for 4th graders who have difficulty in math. They use questions from the NAEP math test in a pre-test and post-test design to assess improvement in math skills for the two groups. This situation involves inference about a difference between two population means.

Learn more about inference:

https://brainly.com/question/30472869

#SPJ4

If the length of a rectangular garden is 9 feet longer than its width, the length of the garden is 50 feet.

Let x be the width of the garden in feet.

According to the problem, the length of the garden is 9 feet longer than the width, so the length can be expressed as x + 9.

The formula for the perimeter of a rectangle is P = 2l + 2w, where P is the perimeter, l is the length, and w is the width.

Substituting the given information, we get:

182 = 2(x + 9) + 2x

Simplifying and solving for x:

182 = 2x + 18 + 2x

182 = 4x + 18

164 = 4x

x = 41

So the width of the garden is 41 feet.

Using the equation for the length, we can find the length of the garden:

length = width + 9

length = 41 + 9

length = 50

To learn more about length click on,

https://brainly.com/question/30703225

#SPJ4

62.5 grams of coffee beans does Diana use when the company.

As per the question that is given:

48 fluid ounces of coffee demands = 30 grams of coffee.

To calculate for 1 gram:

This means that 1 fluid ounce of coffee requires = 30/48 grams of coffee.

To find 100 fluid ounces of coffee demand

=(30/48)×100 grams of coffee

=62.5 grams of coffee.

Learn more about multiplication, here:

https://brainly.com/question/24327271

#SPJ1

This means that Parker performed very well on the history exam, since his score is much higher than the average score in the class.

Step 1: Understand the concept of a z-score.

A positive z-score means that the data point is above the mean, while a negative z-score means that the data point is below the mean.

Step 2: Determine the mean and standard deviation of the normal distribution.

Since we are told that a normal model describes student scores in a history class, we can assume that the distribution of scores is normal. We need to know the mean and standard deviation of the distribution to calculate Parker's z-score.

Let's assume that the mean score in the class is 80 and the standard deviation is 10.

μ = 80

σ = 10

Step 3: Calculate Parker's raw score.

To calculate Parker's raw score, we need to use the formula for z-scores and solve for x:

z = (x - μ) / σ

We know that Parker's z-score is 2.5, and we know the values of μ and σ. Solving for x, we get:

2.5 = (x - 80) / 10

25 = x - 80

x = 105

So, Parker's raw score is 105.

Step 4: Interpret the result.

Since Parker's z-score is 2.5, we know that his score of 105 is 2.5 standard deviations above the mean of 80.

This means that Parker performed very well on the history exam, since his score is much higher than the average score in the class.

To know more about z-score visit:

brainly.com/question/30792829

#SPJ4

If A is invertible and orthogonally diagonalizable, then A is also orthogonally diagonalizable using the same orthogonal matrix Q that diagonalizes A.

If a matrix A is invertible and orthogonally diagonalizable, it means that there exists an orthogonal matrix Q and a diagonal matrix D such that

A = QDQT∧.

To show that A is orthogonally diagonalizable, we need to find an orthogonal matrix P and a diagonal matrix B such that

A = PBP∧T.

Since A is invertible, it has an inverse A∧-1. Using the property

A∧-1 = (QDQ∧T)∧-1 = QD∧-1Q∧T

we can write

A∧-1 = QD∧-1Q∧T.    

We can also rewrite the equation

A = QDQ∧T as D = Q∧TAQ.

Multiplying both sides of

D = Q∧TAQ

by Q from the right, we get

DQ = Q∧TAQQ = Q∧TA,

since

Q∧TQ = I (Q is orthogonal). Similarly, multiplying both sides of

DQ = Q∧TA by Q∧T from the left, we get

Q∧TDQ = AQ∧T.

Now we have

A = QDQ∧T = (Q∧T)∧T D Q∧T = (QQ∧T)∧T D (QQ∧T)

where QQ∧T is an orthogonal matrix. Letting

P = QQ∧T

and B = D, we have

A = PBP∧T, which shows that A is also orthogonally diagonalizable.

To know more about matrix visit

https://brainly.com/question/28180105

#SPJ4