A tank contains 2.5 moles of gas A, 1.2 moles of gas B and 1.0 moles of gas C. If the total pressure is 0.90 atm, what is the partial pressure of gas B?

The concentration of Cd^2+ when Fe^2+ begins to precipitate is 1.50x10^-2 M.

Concentration is the ability to focus intently on a task or activity in order to achieve a desired result. It is a mental skill that requires the ability to ignore distractions, remain focused and motivated, and use all of one's mental resources to complete a task. By developing and strengthening this skill, one can increase their productivity and learn to better manage their time. Concentration also involves the ability to organize and prioritize tasks, as well as to remember and recall information. Concentration is an important skill in many fields, including academics, sports, and the workplace.

The concentration of Cd^2+ when Fe^2+ begins to precipitate will be equal to the original concentration of Cd^2+ in the solution, which was 1.50x10^-2 M.
Therefore, the concentration of Cd^2+ when Fe^2+ begins to precipitate is 1.50x10^-2 M.

To learn more about concentration
https://brainly.com/question/28564792
#SPJ4

Answer:

Explanation: it's right

Answer: Answer: If the amount of reactants is halved, the amount of H2O(l) produced in the reaction will also be halved.

Explanation: The balanced equation for the reaction between HCl(aq) and NaOH(aq) is:

HCl(aq) + NaOH(aq) --> NaCl(aq) + H2O(l)

From this equation, it is clear that for every 1 mole of HCl(aq) and 1 mole of NaOH(aq) that react, 1 mole of H2O(l) is produced.

If the amount of reactants is halved, the amount of H2O(l) produced will also be halved, because the ratio of reactants to products is 1:1.

So, in the case of 20.mL of 0.10MHCl(aq) + 0.10MNaOH(aq) , the amount of H2O(l) produced is 20.mL x 0.10M = 2.00x10^-3mol.

If the amount of reactants is halved, the amount of H2O(l) produced in the reaction will be 1.00x10^-3mol.

The statement defines a field force is b) a force that acts through toucha force that acts through touch.

Field force is a term to express a force that has an influence on its surroundings. Examples are gravitational forces, electric forces, magnetic forces. The three styles have a strong influence on the surrounding area.

In general, the notion of force is an interaction that can cause an object with mass to experience a change in motion, both in terms of direction and geometry. While the definition of force in a nutshell is a push or pull that is able to move objects freely (not bound).

The concept of force is often juxtaposed with motion. Because, the motion of an object occurs because of the force. Although often equated, in fact force and motion are two different things.

Learn more about field force at

https://brainly.com/question/13488023

#SPJ4

A carbon footprint is made up of the sum of two parts, the primary footprint (measure of direct emissions of co2) and the secondary footprint (measure of the indirect CO2 emissions). [TRUE]

Carbon footprint is the amount of carbon or greenhouse gases produced from various human activities in a certain period of time. The carbon footprint is an important instrument for measuring the contribution of individuals, communities, industries, products and others to climate change. By calculating the carbon footprint, an industry can find out the source of its emissions and can minimize its use from an early age.

Here are some sources that can create a carbon footprint:

Vehicle activity is known to cause a carbon footprint. This is due to the process of burning fuel in vehicles. The more use of fossil fuel vehicles, the more carbon emissions will be released into the air.

Production processes that occur in the agricultural, livestock and plantation sectors up to consumers are known to contribute 25% of greenhouse gas emissions to the world's total greenhouse gas emissions.

The use of electricity for daily life is also known to be a cause of gas emissions. This is because there are still many power plants that still use fossil fuels. So if you are not wise in using electricity, more gas emissions will be produced.

Learn more about Carbon footprint at https://brainly.com/question/1270740.

#SPJ4

No, These two samples of NaCl and CoCl₂ will not have the same mass but they do have the same number of particles

One mole of a substance is equal to 6.022 × 10²³ units of that substance (such as atoms, molecules, or ions). The number 6.022 × 10²³ is known as Avogadro's number or Avogadro's constant. The concept of the mole can be used to convert between mass and number of particles.

The molecules can be expressed in units of grams, milligrams or even moles. Example,O2,SO42−,CH4 etc. Hence, the difference between moles and molecules is that a mole is a quantity of 6.022×1023 particles, while a molecule contains various atoms of elements bonded chemically.

Learn more about Moles here:

https://brainly.com/question/15356425

#SPJ1

An epoxide will produce a product in which the epoxide were formed below a double bond and another product in which the ways . one way was formed below the doubled bond at the same time.

An epoxide functional group: what is it?

An epoxide is what? Many chemical compounds include the distinctive functional group known as an epoxide. The group has a 3 ring structure made up of two carbons and oxygen. Epoxides often have a low degree of stability because of the structure of three-membered ring structures.

What does the chemical term "epoxide" mean?

A cyclic ether known as an epoxide has a three-atom ring that closely resembles an equilateral triangle. When comparison to other ethers, these have a high level of reactivity. Two hydrocarbon carbon atoms joined to an oxygen atom make up the basic structure of an epoxide.

To knw more about epoxide visit:

https://brainly.com/question/26718813

#SPJ4

The hypothesis is that the increase in concentration of sucrose results in increased amount of osmosis.

A hypothesis refers to a proposed explanation for a phenomenon. It is a testable statement regarding the relationship between two or more variables or a proposed explanation for some observed phenomenon. It is an assumption made based on some evidence as presented in the table. In the table it is seen that as sucrose concentration increases, the net displacement decreases. Hence, based on the evidence it can be hypothesized that “the increase in concentration of sucrose results in increased amount of osmosis”.

The reasoning is based on the initial volume (which is same for all) and final volume (which decreases with the increasing concentration of sucrose) and net displacement. Osmosis refers to the movement of water molecules from a solution with a high concentration of water molecules to a solution with a lower concentration of water molecules, through a partially permeable membrane. Net displacement refers to the number of molecules in the direction of the forces minus the number of molecules moving in other direction. Hence, as the net displacement decreases with concentration of sucrose it can be inferred that the increase in concentration of sucrose results in increased amount of osmosis.

Note: The question is incomplete. The complete question is attached.

Learn more about Hypothesis:

https://brainly.com/question/11555274

#SPJ4

The formulae of compounds 2 and 3 is XY₂ and XY₃.

A chemical compound is a substance made of numerous identical molecules joined by chemical bonds and containing atoms from various chemical elements. Therefore, a molecule composed entirely of one element's atoms is not a compound. a material made up of two or more different elements joined chemically. Compounds include things like water (H2O), which is created from the elements hydrogen and oxygen, and table salt (NaCl), which is created from the elements sodium and chloride. A substance made up of two or more constituents is called a compound. Water, carbon dioxide, and table salt are examples of compounds.

Here,

The formulae of compounds 2 and 3:

Compound 1: XY6 (2.82g)

Compound 2: XY? (1.41g)

Compound 3: XY? (0.94g)

Compound 1: 2.82/6 = 0.47

Compound 2: 1.41/0.47 = 2

Compound 3: 0.94/0.47 = 3

Compounds 2 and 3 have the following formulas as XY₂ and XY₃.

To know more about compound,

https://brainly.com/question/13516179

#SPJ4

In order to reduce the risk while working with concentrated acids and bases, they need to be neutralized. Thus, for this question option B: "Neutralize it" is the correct answer.

Concentrated acids are the type of acids that contain a very large amount of acid in comparison to water in the solution. Concentrated acids have high numbers of available ions and a higher mass percentage in the solution. While a concentrated base is an aqueous solution that has a relatively high percentage of the base.

In order to reduce risks while handling concentrated acids and bases, they need to be neutralized with solid sodium bicarbonate.

You can learn more about concentrated acids at

brainly.com/question/28389583

#SPJ4

The empirical formula of a substance would be transformed into a molecular formula using Molar Mass.

The empirical formula of a chemical compound in chemistry is the simplest whole number ratio of atoms in a compound. A chemical formula identifies each component element by its chemical symbol and the proportion of atoms that make up each element. Calculate the compound's molar mass by deducting the empirical formula mass. The result must be a whole number or very close to one. You need to know a compound's molar mass or molecular mass in order to convert its empirical formula into a molecular formula.

Learn more about Empirical Formula

brainly.com/question/11588623

#SPJ4

A pure titanium cube has an edge length of 2.81 inches. The  titanium atoms does it contain with titanium has a density of 4.50g/cm3 is 2.0 × 10²⁵  atoms.

Given that :

The edge length = 2.81 inches = 7.1 cm

V = (7.1)³ = 357.9 cm³

m = V ×d

m = 357.9 × 4.50

m = 1610.55 g

The moles = mass / molar mass

                  = 1610.55 / 47.87

                 = 33.6 mol

The titanium atoms = 33.6 × 6.022 × 10²³

                                 = 2.0 × 10²⁵  atoms

Thus, the number of the titanium atoms with edge length of the 2.81 inches is 2.0 × 10²⁵  atoms.

To learn more about atoms here

https://brainly.com/question/5290571

#SPJ4

1. A gas is emitted when the mixture begins to fizz.

2. As the ingredients are combined, the test tube gets cooler

3. The combination turns a strong blue tint

The notion of emission gases is outlined above The objective of this example is to resolve the OPF problem in such a way that both FC and emission are concurrently reduced As the seas warm, they release gases, which is how the desired function is described Sunday TimesThe researchers determined the gass pressure and translated it to volumeThe ResearcherIt continued to release gasSunday Times, Times It has a large number of reddish galaxies that are encircled by gas that emits xrays taken from Wikipedia with a CC BYSA 3.0 license, available Flames that are higher up in the material heat it and release gases that selfignite proving the flashover idea

Learn more about A gas is emitted here:

https://brainly.com/question/12737906

#SPJ4

Answer:

It's not entirely clear whether your question is asking for the percent composition of phosphorus in the substance or the percent composition of all the elements in the substance that contains phosphorus. In either case, the percent composition of phosphorus in this substance is 16.9%.

The percent composition of all the elements in the substance is 48.1% nickel, 16.9% phosphorus, and 35.0% oxygen.

Explanation:

The percent composition of a substance in a sample can be found by dividing the mass of each element present in the sample by the total mass of the sample, and then multiplying by 100%.

To find the percent composition of the substance, we compute the total mass of the sample by adding the masses of all the elements present:

7.22 g + 2.53 g + 5.25 g = 15 g

Next, we divide the mass of each element by the total mass of the sample (15 g) and multiply by 100%.

Nickel: (7.22 g / 15 g) * 100% = 48.13%

Phosphorus: (2.53 g / 15 g) * 100% = 16.87%

Oxygen: (5.25 g / 15 g) * 100% = 35.00%

Given to three significant figures, the percent composition of the substance is: 48.1% nickel, 16.9% phosphorus and 35.0% oxygen.

propane amount. The molar mass of an inert gas is 22.4 E n at standard conditions, or 273.15 K и 1 atom.

The most common cooking propane canister size in India is a 14.2 kg LPG container with a capacity of around 27.8 litres. To account for ullage, an LPG cylinder's contents in litres is deemed full at 80%. Ullage seems to be the empty space in the cap of the LPG cylinder that allows room for the gas vapour to expand. The basic formula measuring volume is length, breadth, and height, as opposed to length, width, and height for the rectangle of a rectangular shape.

standard pressure and temperature (STP) At STP, the 8 moles of Hydrogen will have their largest volume. As a result, choice (A), 8 moles of H, is the right one. Note: As a result, standard molar volume is defined as the pressure created by 1 mole of every gas at STP.

To know more about propane visit :

https://brainly.com/question/11697104

#SPJ4

70 grams of NaCl (salt) were discovered by the police in the room. There is sufficient salt to demonstrate that Albert used acid to kill the butler.

From the given reaction we have as:

HCl + NaOH → NaCl + H2O

Here by comparing the moles of reactants and products we have 1 mole of HCl reacting with 1 mole of NaOH to give 1 mole of NaCl and H2O.

So, we can say that  the mole ratio of NaOH: NaCl: HCl = 1 : 1 : 1

The molecular weight of HCl is 37g

The molecular weight of NaOH is 40g

The molecular weight of NaCl is 59g

In 70g of NaCl there are = 70 / 59 = 1.186 moles of NaCl

If we consider 60g of HCl there are = 60/37 = 1.62 moles of HCl

Here we can see that NaCl acts as limiting reagent and only 1.18 moles of HCl reacts with NaOH.

So, to find the mass of 1.18 moles of HCl = 1.18 x 37 = 43.66g

So, the required amount of HCl to kill the butler is 43.66g. So, there is  enough salt to prove that Albert killed the butler with acid.

To learn more about HCl click here https://brainly.com/question/29204122

#SPJ4

The balanced equation will be K₂CrO₄ + Na₂SO₃ + 2HCl → 2KCl + Na₂SO₄ + CrCl₃ + H₂O.

A balanced chemical equation is a chemical reaction that has equal numbers of moles of chemical substances both in the reactant and the product side.

K₂CrO₄ + Na₂SO₃ + HCl → KCl + Na₂SO₄ + CrCl₃ + H₂O.

Notice that there are two K atoms on the left and one on the right, two Cr atoms on the left and one on the right, four O atoms on the left and one on the right, two Na atoms on the left and two on the right, three S atoms on the left and one on the right, and one H atom on the left and one on the right.

Balance the K atoms, by adding a coefficient of 2 in front of the KCl on the right side of the equation. To balance the Cr atoms, we can add a coefficient of 2 in front of the CrCl3 on the right side of the equation. To balance the O atoms, we can add a coefficient of 3 in front of the H2O on the right side of the equation. To balance the Na atoms, we don't need to add any coefficient. To balance the S atoms, we don't need to add any coefficient. To balance the H atoms, we can add a coefficient of 2 in front of the HCl on the left side of the equation.

The coefficients are now in the smallest whole-number ratio possible.

Check if the equation is now balanced.

So, the balanced equation is: K₂CrO₄ + Na₂SO₃ + 2HCl → 2KCl + Na₂SO₄ + CrCl₃ + H₂O.

Learn more about balanced equation here: https://brainly.com/question/26694427

#SPJ4

The following nuclear equation needs a particle to be complete: 23893np =56/26 Fe.

The sign is accompanied by two numbers. The mass number, commonly referred to as the "A" number, is the number in the upper right. The "A" number identifies the number of protons and neutrons in the nucleus as well as the atomic weight of the given atom.

there is a mass shift, m, as a result of nuclear fusion and nuclear fission. Energy E = mc2, where c is the speed of light, is created when mass is lost.

To know more about nuclear equation visit:

https://brainly.com/question/19752321

#SPJ4

The products for the following synthesis reaction: Al + Cl2 is AlCl₃ (option C).

A chemical reaction is a process involving the breaking or making of interatomic bonds, in which one or more substances are changed into others.

A synthesis reaction is a specific type of chemical reaction that involves the combination of two chemical elements bonded together to produce a compound.

According to this question, aluminium and chlorine gas are combined to form aluminium chloride as follows:

2Al + 3Cl₂ → 2AlCl₃

Therefore, AlCl₃ is the product of the synthesis reaction.

Learn more about synthesis reaction at: https://brainly.com/question/16987748

#SPJ1

The carbon mass percent in pure glucose, c6h12o6, is 40.0 percent. A chemist analyses an impure specimen of carbohydrates and defines that the carbon mass percent is 38.2 percent.. Option B - H20 ,water impurities could account for the low mass percent of carbon .

Impurities refer to unwanted substances present in a sample of a pure substance. They can be present in trace amounts or in larger quantities and can affect the properties or performance of the pure substance. Mass percent, also known as weight percent, is a way to express the concentration of a component in a mixture. It is calculated by dividing the mass of the component of interest by the total mass of the mixture, and then multiplying by 100. The resulting number represents the percentage of the total mass that is made up of the component of interest. For example, in the case of glucose, the mass percent of carbon is 40.0% because 40 grams of carbon are present in every 100 grams of glucose.

Learn more about mass percent here:

https://brainly.com/question/15461083

#SPJ4

Evaporation was the process used to separate the copper sulfate and water.

Anything that remains after a substance has already been removed is called a residue, such as the fat on a frying pan. Additionally, it can simply mean "remainder." Remaining liquid in a bottle, pot, or container after rest has been drained out is referred to as residue.

Chromatography is a separation technique used in labs. The mobile phase or the stationary phase are the two phases of this method.

Mobile phases include both the phase within which the mixture dissolves and the phase that acts as either a carrier through system, such as a sheet or capillary is termed as mobile phase.

The process of evaporation involves using heat to remove dissolved particles from liquid. Heat causes liquid to evaporate, leaving behind the solid. Insoluble particles are removed from the liquid through the process of filtration, which involves permitting it to pass through some kind of porous material like filter paper A method for separating a mixture of liquids having various boiling points is distillation. From this, we might infer that evaporation was the process utilized to separate the salt solution and water mixture.

To know more about Residue visit :

https://brainly.com/question/16794270

#SPJ4

The Complete Question :

A mixture of copper sulfate and water is heated, leaving a residue of copper sulfate in the container. Which method was used to separate the mixture?

A. chromatography

B. evaporation

C. filtration

D. distillation

The use of the continuity equation is justified by the following assumptions:

A continuity equation, also known as a transport equation, is an equation that explains the transfer of a substance. It is especially easy and effective when used to a conserved amount, but it may be extended to apply to any vast quantity. Because mass, energy, momentum, electric charge, as well as other natural quantities remain conserved under their respective proper circumstances, a wide range of physical processes may be explained using continuity equations.

Continuity equations represent a more powerful, localised variant of conservation rules. For example, a weakened form of the law of conservation of energy asserts that energy cannot be generated or destroyed, implying that the total quantity of energy in the cosmos is fixed. This statement does not exclude the possibility of an amount of energy disappearing from one spot while arriving at another.

To know more about the Continuity equation, here

https://brainly.com/question/29103113

#SPJ4

If 0.120 m HCl is slowly added to the NaOH sample, then if the acidic solution increase greater than basic solution, the pH range indicator will change its color between 4.4 and 6.2 indicating red color.

Methyl red has a pKa value of 5. Consequently, between its pKa values of 4 and 6, it displays a colour change range of +/-1 pH unit. In acidic conditions, methyl red, an indicator dye, turns red. It serves as a pH indicator, turning yellow above pH 6.4 and orange between pH 4.4 and 6.2. An azo dye called methyl red is created from benzoic acid and a 2-positional 4-[(dimethylamino)phenyl]diazenyl group. It serves as a dye. It is a monocarboxylic acid, a tertiary amino compound, and a member of the azobenzene family.

To learn more about pH click here      https://brainly.com/question/491373

#SPJ4

Answer:

Claim: The round cast iron container filled with ice water and sealed with a lid will maintain its temperature for a certain period of time.

Evidence: The container is made of 1/8 inch thick cast iron and the lid is tightened to prevent heat loss. The container is placed in a metal dish that contains dry ice and acetone which will help to decrease the temperature inside the container.

Reasoning: The cast iron container is a good insulator which means it will slow down the transfer of heat from the inside to the outside. The lid will help to prevent heat loss through convection. The dry ice and acetone in the metal dish will provide a cooling effect to the container, which will help to keep the temperature inside the container low for a longer period of time. The combination of insulation and cooling will help to maintain the low temperature inside the container for a certain period of time.

The bronsted-Lowry reactions is HSO, +HBrO= H,$O,+BrO,acid:H donor (H,SO,HBIO),base:H' receiver fHSO, where each product is positioned according to its appropriate label. BrO)

What in chemistry is Brnsted-Lowry?

According to the Brnsted-Lowry theory of bases and acids a Brnsted-Lowry base needs at least one single electron pair to take a proton and create a new connection with a proton. A proton is exchanged from such an acid to a base in an acid-base reaction, according to the Brnsted-Lowry definition.

What is a Lewis base versus a Brnsted-Lowry base?

A Brønsted - lowry bases is a chemical that can take a hydrogen ion, whereas a Brønsted - lowry acid can donate one. A Hamilton base is a chemical that can give up two electrons, whereas a Lewis acid can take in two electrons.

To know more about Bronsted-Lowry visit:

https://brainly.com/question/14407412

#SPJ4

Bond order, as we know, is inversely related to bond length. Bond length decreases when bond order increases and vice versa. Increasing order of bond length will be SO2<SO42-<SO32-. 

Sulphur dioxide has the lowest bond length, whereas sulphite ion does have the longest. Bond order is really the number of electron bonding pairs that exist between two atoms. A single bond has a bond order of one in a covalent bond between two atoms, a double bond does have a bond order of two, a triple bond does have a bond order of three, and on and on. Bond length and bond order are connected; when more electrons engage in bond formation, the bond is shorter. Bond length is often inversely linked to bond strength and bond dissociation energy, thus a stronger bond would be shorter if all other conditions are equal. Half the bond distance between two similar atoms equals the covalent radius.

Bond lengths typically measured inside the solid phase using X-ray diffraction, and in the gas phase using microwave spectroscopy. A bond between a particular pair of atoms might differ amongst molecules. Methane, for example, has different carbon-hydrogen bonds than methyl chloride. However, generalizations are conceivable when the overall structure remains the same.

To know more about the Bond order, here

https://brainly.com/question/29853110

#SPJ4

MgCl2 + KOH will yield a precipitate because Since Mg(OH) is considered to be "insoluble" based on the solubility chart, it will precipitate where the other reactions listed above are unstable and quickly decompose into water and carbon dioxide.

In chemistry, a solid is created when a solution changes, frequently as a result of a chemical reaction or a shift in temperature that makes a solid less soluble. A solid that emerges from a solution is called a precipitate. The mixing of two transparent solutions, such as sodium chloride (NaCl) and silver nitrate (AgNO3), is a typical example. The response is. Because the solid (AgCl) is insoluble in water, a precipitate forms. The term "supernate" or "supernatant" also refers to the clear liquid that remains on top of the precipitated or centrifuged solid phase.

Here,

Since Mg(OH) is regarded as being "insoluble" according to the solubility chart, MgCl2 + KOH will result in a precipitate where the other reactions mentioned above are unstable and quickly decompose into water and carbon dioxide.

To know more about precipitate,

https://brainly.com/question/15769904

#SPJ4

The chemical formula of the two elements X whose charge is 2 and Y whose charge 3 is X3Y2.

These steps are used to respond to this type of assignment question:

Remember that every substance has a neutral pH level. In other words, a similar number of positive charges are used to offset any negative charges.

In this scenario, multiplying 2 by a unit of Y will get the total charge for the products.

Determine how much total counter-charge you'll require.

The required charge distribution can be calculated using the formula. Here, X is divided into three equal units for each unit.

Anion valency = number of cations

A cation's valency is equal to the number of anions.

Thus, X3Y2 will be the proper formula.

For more information on chemical formula kindly visit to

https://brainly.com/question/14301583

#SPJ4

The warm air in Earth’s atmosphere and the warm water in Earth’s oceans sink instead of rise.

The heat energy can be transported by convection by the temperature differential between the two portions of the fluid. Hot fluids tend to ascend due to the temperature differential, but cold fluids prefer to sink. This causes a convection current to form inside the fluid.

Differential heating causes convection currents. Warmer (less dense) stuff rises, whereas cooler (more dense) material sinks. This movement is responsible for the formation of circulation patterns known as convection currents in the Earth’s atmosphere, ocean, and mantle.

To learn more about convection to refer:

https://brainly.com/question/4138428

#SPJ4

I2(g)+Cl2(g)2ICl(g),Kp=81.9 equals 1.091 x 104 J/mol. A system's energy-like property of state function when it is in thermodynamic equilibrium. Free energy shares the same dimensions as other forms of energy, yet unlike other forms of energy, its worth depends on the current condition of the system rather than its past.

Free and Gibbs free energy G, which differs from the overall energy change in a chemical reaction, is the amount of energy in a system that can be used to carry out useful work.

Due of its simplicity and accessibility at all times, Gibb free energy is also known as free energy. If necessary, this energy can be provided to the reaction without any effort on its part. The product of the system's temperature and entropy, added together with the system's enthalpy, determines the change of Gibb's free energy.

To know more about free energy visit:

https://brainly.com/question/15319033

#SPJ4