A trough is 7 meters long, 2 meters wide, and 1 meters deep. The vertical cross-section of the trough parallel to an end is shaped like an isoceles triangle (with height 1 meters, and base, on top, of length 2 meters). The trough is full of water (density 1000 kg m 3 ). Find the amount of work in joules required to empty the trough by pumping the water over the top. (Note: Use g

Answer:

(a) The negative charge on one of the charges is -8.79630245 × 10⁻⁷C

(b) The positive charge on one of the other charges is 8.79630245 × 10⁻⁷C

Explanation:

The given parameters are;

The force of attraction between the two spheres = 0.0988 N

The distance between their centers = 44.5 cm = 0.445 m

Therefore, we have;

[tex]F = \dfrac{k \cdot q_1 \cdot q_2}{d^2}[/tex]

Therefore, we have;

[tex]0.0988 \ N = -\dfrac{8.99 \times 10^9 N\cdot m^2 \cdot C^{-2}\cdot q_1 \cdot q_2}{(0.445 \ m)^2}[/tex]

Therefore, we have;

q₁·q₂ = -0.0988 N × (0.445 m)²/(8.99 × 10⁹ N·m²·C⁻²) = -2.17629255 × 10⁻¹² C²

q₁·q₂ = -2.17629255 × 10⁻¹² C²...(1)

When the two charges are connected, we get;

[tex]F_2 = \dfrac{k \cdot \left (\dfrac{q_1 + q_2}{2} \right) ^2}{d^2}[/tex]

Therefore, we have;

[tex]q_1 + q_2 = \sqrt{\dfrac{4 \cdot F_2 \cdot d^2}{k} }[/tex]

[tex]q_1 + q_2 = \sqrt{\dfrac{4 \times 0.0276 \ N \times(0.445 \ m)^2}{8.99 \times 10^9 N\cdot m^2 \cdot C^{-2}} } = 1.59446902743 \times 10^{-6} \ C[/tex]

q₁ + q₂ = 1.59446902743 × 10⁻⁶ C...(2)

From, equation (2), we have;

q₁ = 1.59446902743 × 10⁻⁶ C -  q₂

Plugging in the value of q₁ in equation (1) givens;

q₁·q₂ = -2.17629255 × 10⁻¹²

Therefore, we have;

(1.59446902743 × 10⁻⁶ -  q₂) × q₂ = -2.17629255 × 10⁻¹²

Which gives;

-q₂² + 1.59446902743 × 10⁻⁶·q₂+2.17629255 × 10⁻¹² = 0

Solving, with a graphing calculator, we get;

q₂ = 2.4741×10⁻⁶ C, or -8.79630245 × 10⁻⁷C

q₁ = 8.79630245 × 10⁻⁷C or -2.4741×10⁻⁶ C

Therefore, we have;

(a) The negative charge on one of the charges = -8.79630245 × 10⁻⁷C

(b) The positive charge on one of the other charges = 8.79630245 × 10⁻⁷C

Answer:

t = 12.6 seconds

Explanation:

Given that,

Initial velocity, u = 0

Acceleration of an electric vehicle, a = 2.3 m/s²

Final velocity, v = 29 m/s

We need to find the time elapses from start to stop. The acceleration of an object is given by the relation as follows :

[tex]a=\dfrac{v-u}{t}\\\\t=\dfrac{v-u}{a}\\\\t=\dfrac{29-0}{2.3}\\\\t=12.6\ s[/tex]

So, 12.6 seconds is elapsed from start to stop.

Answer:

Postural deviations can cause poor balance, muscle pain and skeletal stress.

Explanation:

The mass percent of hydrogen in CH₄O is 12.5%.

Mass percent is the mass of the element divided by the mass of the compound or solute.

Step 1: Calculate the mass of the compound.

mCH₄O = 1 mC + 4 mH + 1 mO = 1 (12.01 amu) + 4 (1.00 amu) + 1 (16.00 amu) = 32.01 amu

Step 2: Calculate the mass of hydrogen in the compound.

mH in mCH₄O = 4 mH = 4 (1.00 amu) = 4.00 amu

Step 3: Calculate the mass percent of hydrogen in the compound.

%H = (mH in mCH₄O / mCH₄O) × 100%

%H = 4.00 amu / 32.01 amu × 100% = 12.5%

The mass percent of hydrogen in CH₄O is 12.5%.

CO2 = 1.580 grams H2O = 0.592 grams Lookup the molar mass of each element in the compound Carbon = 12.0107 Hydrogen = 1.00794 Oxygen = 15.999 Calculate the molar mass of CH4O by adding the total masses of each element used. 12.0107 + 4 * 1.00794 + 15.999 = 32.04146 Now calculate how many moles of CH4O you have by dividing by the molar mass. m = 1.15 g / 32.04146 g/mole = 0.035891 mole Now figure out how many moles of carbon and hydrogen you have. Carbon = 0.035891 moles Hydrogen = 0.035891 moles *

Therefore, The mass percent of hydrogen in CH₄O is 12.5%.

Learn more about mass percent here:

https://brainly.com/question/5295222

#SPJ6

Answer:

Their bodies don't conduct electricity like we do.

Explanation:

Answer:

birds dont get shocked because they sit on their talons and their talons are a different type of skin then the rest of their body

Explanation:

Answer:

Gravitational

Explanation:

gravitational

Answer:

Gravitational

Explanation:

In order from strongest to weakest.

Strong nuclear

Electromagnetic

Weak nuclear

Gravitational

Answer:

* displacement from equilibrium position

* The spring constant,

Explanation:

The work done by a spring is two times the expressions

         W = ∫ F. dx

in a spring the force is given by hooke's law

          F = - k Δx

we substitute

         W = - k ∫ x dx cos θ

In the case of the spring, the displacement is in the same direction of work, therefore the angle is zero and the cosine is equal to 1

we integrate

           W = ½ k Δx²

we can see that we need two parts to calculate the work

* displacement from equilibrium position

          Δx = 12 -8 = 4 cm

* The spring constant, this constant can be found from the displacement measurements as a function of the applied force.

Answer:

t = 2.01 s

Vf = 19.7 m/s

Explanation:

It's know through the International System that the earth's gravity is 9.8 m/s², then we have;

Data:

==================================================================

Time

Use formula:

Replace:

Everything inside the root is solved first. So, we solve the multiplication of the numerator:

It divides:

The square root is performed:

==================================================================

Final Velocity

use formula:

Replace:

Multiply:

==================================================================

How long does it take to reach the ground?

Takes time to reach the ground in 2.01 seconds.

How fast does it hit the ground?

Hits the ground with a speed of 19.7 meters per seconds.

Answer:

4

2

1

3

Explanation:

Be safe, lovelies <3

Answer:

Explanation:

Impulse = change in momentum

Initial momentum = mass x initial velocity = 100 x 5 = 500 kg m/s

final momentum = mass x final velocity = 100 x - 4 = -400 ( - ve sign due to reversal of direction )

change in momentum = final momentum - initial momentum

= - 400 - 500 = - 900 kg m/s .

As it is - ve , it acts upwards .

So magnitude of  impulse on Perter = 900 kg m/s

Answer:

1.52 × 10⁻²⁰ J

Explanation:

The electrical potential difference is defined as the amount of work done in carrying a unit charge from one point to another point in an electric field. Electric potential difference is measured in volts. It is given by the formula:

ΔV = ΔU / q

ΔV is electric potential difference between the two points, ΔU is the work done and q is the unit charge.

Given that ΔV = 0.095 V, q = 1.6 × 10⁻¹⁹ C. Hence:

ΔU = ΔV.q

ΔU = 0.095 V * 1.6 × 10⁻¹⁹ C

ΔU = 1.52 × 10⁻²⁰ J

The electric potential difference is the amount of effort done in an electrical field to shift a unit charge from one spot to another.The electric potential difference will be 1.52×10⁻²⁰J.

What is the electric potential difference ?

The electrical potential difference is the amount of effort done in an electrical field to shift a unit charge from one spot to another.

Traditional current flows from positive to negative terminals, signifying positive charge transfer in that direction.

The given data in the problem is

[tex]\triangle V[/tex] is the electric potential difference between the inner and the outer cell wall = 0.095 V

[tex]\triangle U[/tex] is the amount of work done

q is the charge on the electron =1.6×10⁻¹⁹C

Electric potential difference is given by the formula

[tex]\triangle V=\frac{\triangle U}{q} \\\\ \triangle U=\triangle Vq\\\\\triangle U=0.095 V\times1.6\times10^{-19}\\\\ \triangle U=1.52\times10^{-20}J[/tex]

Hence the electric potential difference will be 1.52×10⁻²⁰J.

To learn more about the electric potential difference refer to the link;

https://brainly.com/question/9383604

Answer:

Acceleration

Explanation:

Answer: Acceleration

Explanation:

Answer:

Vf = 29.4 m/s

h = 44.1 m

Explanation:

Data:

==================================================================

Final Velocity

Use formula:

Replace:

Multiply:

==================================================================

Height

Use formula:

Replace:

Multiply time squared:

Simplify the s², and multiply in the numerator:

It divides:

What is the velocity when falling to the ground?

The final velocity is 29.4 meters per seconds.

How high is the building?

The height of the building is 44.1 meters.

Answer:

t = 5.88 10⁻² s

Explanation:

The speed of the sound wave after it is emitted by the bat is constant, so we can use the uniform motion relationships

          v = [tex]\frac{x}{t}[/tex]

          t = [tex]\frac{x}{v}[/tex]

in this case the distance is that of the sound in going from the bat to the insect and back

         x = 2d

         x = 2 10

         x = 20 m

let's calculate

        t = 20/340

        t = 5.88 10⁻² s

We can see that the time is very short, so the distance traveled by the two animals has little influence on the result.

Answer:

A) 1268 MeV

B)  299MeV/c

C) 1268 MeV

Explanation:

Given :

π meson rest energy = 139.6 MeV

Speed = 0.921c

proton at rest energy = 938.3 MeV

a) Find the total relativistic energy of resulting composite particle

E = E(meson) + E(proton)

  = [tex]\frac{(mc^2)_{meson} }{\sqrt{1-\frac{v^2}{c^2} } } + (mc^2)_{proton}[/tex]

  = [tex]\frac{139.6MeV}{\sqrt{1-\frac{(0.906c)^2}{c^2} } } + 938.3[/tex]

E = 1268 MeV

B) determine the total linear momentum of the composite particle

= 299MeV/c

attached below is the detailed solution

C) Determine the rest energy of the composite particle

E = 1268 MeV

Answer:lever

Explanation:

Answer:

A

Explanation:

Answer:

Well, you said the answer is A, so it’s A!

Answer:

i think its ancestor

Explanation:

sry if im wrong

Answer:

scientists compare organisms DNA to support the theory that all species share a common Ancestor.

Answer:

a) V = 0.24 m/s

b) v = 1.53 m/s

Explanation:

In this case, we are asked to find two values that are pretty similar and use the same units, however, there are differences between them.

The average velocity is often referred to a vector quantity, therefore, if time is a scalar magnitude, we need to find the vector quantity of distance. In this case, is the displacement, which is also referred as a vector.

So, to calculate the average velocity we need to determine first the displacement of the person. As the person heads east and then west, his total displacement (D) is:

D = 55 - 40 = 15 m

Now the total time would be the time taken to go to the windmill and then, to a bench:

t = 25 + 37 = 62 s

Finally, the average speed is:

V = D/t

V = 15 / 62

The average speed is a scalar magnitude, so we use the covered distance by the person (d) and the total time:

d = 40 + 55 = 95 m

Then, the speed:

v = 95/62

Hope this helps

Answer:

Do you still need help??

Explanation:

Answer:

Hello the diagram related to your question is attached below

answer: a) 851 m/s

             b)  8506.1 secs

Explanation:

calculate the periodic time of the satellite using the equation below

t = [tex]\frac{2\pi }{R} \sqrt{\frac{(R+h)^{3} }{g} }[/tex]  --  ( 1 )

where ; R = 6370 km

h = 500 km

g = 9.81 m/s^2

input given values into equation 1

t = 5670.75 secs

next calculate the periodic time taken by the space craft  

a) determine the increase in speed

V = v - [tex]\sqrt{\frac{gR^2}{R + h} }[/tex]  

where ; v = 8463 m/s , R = 6370 km, h = 500 km

V = 851 m/s

b) Determine the periodic time for the elliptic orbit

τ = [tex]\frac{3t}{2}[/tex]

 = [tex]\frac{3*5670.76}{2}[/tex]  =  8506.1 secs

attached below is the remaining part of the detailed solution

Answer:

ionized particles from the sun.

* interactions in radiation belts.

* the friction of the planet in the solar wind

q = +9 10⁵ C

Explanation:

Due to being made up of matter, the planet Earth has a series of positive and negative charges, in general these charges should be balanced and the net charge of the planet should be zero, but there are several phenomena that introduce unbalanced charges, for example:

* ionized particles from the sun.

* interactions in radiation belts.

* the friction of the planet in the solar wind

This creates that the planet has a net electrical load

We can roughly calculate the charge of the planet

             E = k q / r²

             q = E r² / k

let's calculate

             q = 200 (6.37 10⁶)²/9 10⁹

              q = +9 10⁵ C

Answer:

the average kinetic energy of the 10 molecules is 10 J.

Explanation:

Given;

energy on one molecule in motion, E = 100 J

number of molecules, n = 10

(A) The average kinetic energy of the 10 molecules

since the remaining 9 molecules are at rest, their kinetic energy = 0

[tex]E_{Avg} = \frac{E_1 + E_9}{10} \\\\E_{Avg} = \frac{100J+ 0}{10} \\\\E_{Avg} = \frac{100J}{10} \\\\E_{Avg} = 10J[/tex]

Therefore, the average kinetic energy of the 10 molecules is 10 J.

Answer:

B

Explanation:

Friction is a force that opposes motion between any surfaces that are touching. Friction occurs because no surface is perfectly smooth Friction produces heat because it causes the molecules on rubbing surfaces to move faster and have more energy.

Answer:

PRECAUTIONS

-The refracting faces of the glass prism should be smooth, transparent and without any air bubble or broken edge. ...

-Use a sharp pencil to draw boundary of the prism and rays of light.

-The alpins should have sharp tip and should be fixed exactly vertical to the plane of the paper.

Explanation:

Please give thanks to all my answers and please mark as brilliant and please follow me