(a) Why the maximum tidal range (spring tide) occurs during a new moon and full moon phases?(b) Why the minimum tidal range (neap tide) occurs at first-quarter and third-quarter moons?

Answers

Answer 1

(a) The maximum tidal range (spring tide) occurs during a new moon and full moon phases because the sun and moon's gravitational pulls are aligned and amplified.

(b) The minimum tidal range (neap tide) occurs at first-quarter and third-quarter moons because the sun and moon's gravitational pulls are at right angles.

(a) As the sun and moon's gravitational pulls are aligned and amplified during the new moon and full moon phases, the maximum tidal range, or spring tide, occurs during these periods. With the moon and sun on opposing sides of the Earth, the sun, moon, and Earth are all in a straight line during a new moon. Due to the moon's proximity to Earth, its gravitational pull on the planet is at its greatest. Due to its alignment with the moon and Earth, the sun's gravitational pull also contributes to this. A broader tidal range results from the seas bulging due to this alignment, which also generates higher peak tides and lower low tides.

(b) As the sun and moon's gravitational pulls are at right angles during the first and third quarters of the moon, the shortest tidal range, or neap tide, occurs at these periods. With the sun and moon on opposing sides of the Earth, the sun, Earth, and moon make a straight angle during a first-quarter moon. The gravitational pull of the sun partially cancels out the gravitational pull of the moon on Earth, reducing the tidal range. When the moon is quartered, the same thing takes place. There is a narrower tidal range at these periods because the high tides are lower and the low tides are higher.

For a similar question on Maximum tidal range,

https://brainly.com/question/2855316

#SPJ4


Related Questions

a golfer hits an iron shot with a new club as she approaches the green. she is pretty sure, based on past experience, that she hit the ball with a speed of 50 m/s , but she is not sure at what angle the golf ball took flight. she observed that the ball traveled 100 m before hitting the ground. what angle did she hit the ball?

Answers

θ = 49.3° at this angle she hit the ball.

The initial velocity of the ball can be broken down into its x and y components:

Vₓ = 50 * cos(θ)

Vy = 50 * sin(θ)

The ball's position can be found using the kinematic equations for constant acceleration due to gravity:

[tex]X = V_{x} * t\\Y = V_{y}* t - (\frac{1}{2}) * 9.81 * t^{2}[/tex]

Since we know the ball's final position is 100 m, we can set these equations equal to 100 and solve for t:

[tex]100 = V_{x} * t\\100 = V_{y} * t - (\frac{1}{2}) * 9.81 * t^{2}[/tex]

From here, we can solve for the angle θ. Rearranging the initial velocity equation:

Vy = 50 * sin(θ)

We can substitute this into the equation for Y, and solve for θ:

θ = [tex]arcsin\frac{(2*(100 + (\frac{1}{2})*9.81*t^{2}))}{(50*t)}[/tex]

After solving the equations for t, we can plug that value into this equation for θ and get the angle at which the ball was hit.

The answer is θ = 49.3°

learn more about initial velocity Refer:brainly.com/question/9163788

#SPJ4

what is the range of distance before and behind the main focus distance? the character or object remains in focus if they remain in this range

Answers

The range of distance before and behind the main focus distance is referred to as the depth of field.

The depth of field is determined by several factors, including aperture size, focal length, and distance to the subject. Generally, the depth of field is greater behind the main focus distance than in front of it. The distance before the main focus distance is referred to as the near focus limit, and the distance behind it is referred to as the far focus limit. The depth of field is an important consideration in photography and videography as it affects the sharpness and clarity of the final image or video. It can be adjusted by changing the aperture size, focal length, or distance to the subject. The range of distance before and behind the main focus distance is referred to as the depth of field.

Learn more about focal length :

https://brainly.com/question/29870264

#SPJ4

(ii) One possible path of the spacecraft as it approaches the planet is shown in fig.1.1 The spacecraft enters the orbit at point A with speed 3.7x10^3 ms^-1.At point B, a distance of 5.00x10^7 from the centre of the planet, the spacecraft has a speed of 4.1x10^3ms^-1. The mass of the spacecraft is 650kg. For the spacecraft moving from point B to point A, show that the change in gravitational potential energy of the spacecraft is8.3x10^9

Answers

The change in gravitational potential energy of the spacecraft as it moves from point B to point A is 8.3x10^9 J.

The change in gravitational potential energy of the spacecraft as it moves from point B to point A can be calculated using the formula:

                    [tex]ΔPE = -GMm(1/rA - 1/rB)[/tex] , where

ΔPE is the change in gravitational potential energy,

G is the gravitational constant,

M is the mass of the planet,

m is the mass of the spacecraft,

rA is the distance from the planet's center at point A, and

rB is the distance from the planet's center at point B.

Using the given values, we have:

[tex]ΔPE = -(6.67x10^-11 Nm^2/kg^2)(1.50x10^24 kg)(650 kg)(1/5.00x10^7 m - 1/0)[/tex][tex]ΔPE = -(6.67x10^-11 Nm^2/kg^2)(1.50x10^24 kg)(650 kg)(1/5.00x10^7 m - 1/0)[/tex]

Simplifying the expression, we get:

[tex]ΔPE = -8.3x10^9 J[/tex]

Therefore, the change in gravitational potential energy of the spacecraft as it moves from point B to point A is [tex]8.3x10^9[/tex]J, which is a negative value because the spacecraft is moving closer to the planet and its gravitational potential energy is decreasing.

To know more about gravity visit:

brainly.com/question/2497387

#SPJ1

a bicycle wheel has a diameter of 74.6 cm and a mass of 0.758 kg. the bicycle is placed on a stationary stand on rollers and a resistive force of 95.7 n is applied to the rim of the tire. assume all the mass of the wheel is concentrated on the outside radius. in order to give the wheel an acceleration of 2.6 rad/s 2 , what force must be applied by a chain passing over a sprocket with diameter 8.38 cm? answer in units of n.

Answers

Force applied by a chain passing over a) is 854 N and force is required if the chain shifts to a 8.38 cm is 869N.

A) The expression for force is product of force and distance of force from the axis of rotation,

τ = r x F

Here sum of clock wise moments are negative and sum of anticlockwise moments are positive,

τ = r x Fa

τnet = r x Fa - R x F

Torque is product of inertia and angular acceleration,

I∝ = r x Fa - R x F

[tex]F_a = \frac{I\alpha + R*F_r_e_s}{r}[/tex]

Moment of inertia of wheel is,

I = MR²

= (0.758)(0.746)

= 0.565 kg.m³

Fa = 854 N

B) using the equation,

[tex]F_a = \frac{I\alpha + R*F_r_e_s}{r}[/tex]

= [tex]\frac{(0.565) (2.6) + (95.7)(0.746) }{0.0838}[/tex]

= 869N

Newton's alternate law establishes that the net necklace acting on a body equals the product of the body's moment of indolence and its angular acceleration,

The moment of indolence serves as a measure of the body's resistance to a change in its rotational state of stir.

Learn more about Force applied:

https://brainly.com/question/15721542

#SPJ4

Can someone help me with this

Answers

(a) For graph A the object is moving at a zero constant speed.

(b) For graph B the object is moving at a constant speed greater than zero.

(c) For graph C the object is moving a uniform speed.

What is constant and uniform velocity?

Constant velocity refers to a situation in which an object moves at a constant speed in a straight line. This means that the magnitude of the velocity (i.e. the speed) of the object remains the same over time, while its direction may or may not change.

Uniform velocity refers to a situation in which an object moves with a constant speed, but also changes its direction. In other words, the object has a constant magnitude of velocity (i.e. speed), but its direction is constantly changing. An object moving in a circular path at a constant speed is an example of an object with uniform velocity.

Learn more about constant and uniform velocity here: https://brainly.com/question/17487511

#SPJ1

This is an AP physics problem on the subject of Conservation of Momentum

Answers

The Momentum is the product of mass and velocity.

What is the momentum?

Momentum is a measure of an object's motion. It is defined as the product of an object's mass and its velocity. In physics, momentum is a conserved quantity, which means that the total momentum of a closed system remains constant unless acted upon by an external force.

Final momentum of Ax = 1 * 2 * cos 30 = 1.73 Kgm/s

Final momentum of Ay =  1 * 2 * sin 30 =1 Kg m/s

Final momentum of Bx = 1 * Vs * cos 30

Final momentum of By = 1 * Vy * sin 30

The velocity is then;

1 * 5 + 0 = (1 * 2) + (1 * vs)

5 = 2 + vs

Vs = 3 m/s

Learn more about momentum:https://brainly.com/question/30487676

#SPJ1

a 0.20 kg mass on a horizontal spring is pulled back 2.0 cm and released. if, instead, a 0.40 kg mass were used in this same experiment, the total energy of the system would

Answers

By the help of potential energy of the spring, so option A) 0.21 m/s is the correct answer.

There is no energy in the spring in its normal state, which is when it is not stretched. However, the spring can store energy when it is in a position that is different from its normal position because of the position. Potential energy is the name for this accumulated energy. The accumulated potential energy as a result of a specific elastic item, such as a spring, deforming is known as the potential energy of the spring. It reflects the labor involved in stretching the spring and is dependent on both the length of the stretch and the spring constant, k.

the energy of the spring = [tex]\frac{1}{2} kx^2[/tex]

so it depends on spring's constant

and change  in length

so it is independent of mass

so, A) remains the same is the correct answer

B) total energy =[tex]0.5mv^2= 0.5\times0.2\times0.3^2[/tex]

total energy =  [tex]9\times10^-3 J[/tex]

v = 0.21 m/s

so 0.21 m/s is the correct answer

Learn more about potential energy

brainly.com/question/29510087

#SPJ4

An 420 kg car accelerates from 0 to 50 m/s^2 in 4.3 s.
What is the acceleration of the car and what is the force produced by the
car?

Answers

The acceleration of the car is [tex]11.63 m/s^2.[/tex] The force produced by the car is 4,876.4 Newtons.

How to calculate the force and acceleration?

To find the acceleration of the car, we can use the formula:

acceleration = (final velocity - initial velocity) / time

In this case, the initial velocity is 0 m/s, the final velocity is 50 m/s, and the time is 4.3 s. Substituting these values into the formula, we get:

acceleration = (50 m/s - 0 m/s) / 4.3 s =[tex]11.63 m/s^2[/tex]

Therefore, the acceleration of the car is[tex]11.63 m/s^2.[/tex]

To find the force produced by the car, we can use Newton's second law of motion, which states that force is equal to mass times acceleration:

force = mass x acceleration

In this case, the mass of the car is 420 kg, and the acceleration is 11.63 m/s^2. Substituting these values into the formula, we get:

[tex]force = 420 kg \times 11.63 m/s^2 = 4,876.4 N[/tex]

Therefore, the force produced by the car is 4,876.4 Newtons.

To learn more about acceleration and force:

brainly.com/question/20005124

#SPJ1

How do we define work as the product of force and distance in the direction of force?

Answers

Answer:

Work is defined as the product of force and distance in the direction of force because it represents the amount of energy that is transferred from one object to another as a result of a force being applied over a certain distance.

The definition of work as the product of force and distance (W = Fd) is based on the concept of energy transfer. Energy is defined as the ability to do work, and work is defined as the transfer of energy from one object to another. When a force is applied to an object over a certain distance, the energy that is transferred is equal to the amount of work done.

a solid sphere of silver, which is a good conductor, has a spherical cavity at its center. there is a point charge at the center of the cavity. the silver sphere has a charge of 9.00 nc on its outer surface and a charge of -2.00 nc on the surface of the cavity. what is the value of the point charge?

Answers

The value of the point charge is zero.

What do you mean by charge?

Charge, also known as electric charge, electrical charge, or electrostatic charge and denoted by the symbol q, is a property of a unit of matter that indicates how many more or fewer electrons than protons it contains.

When a subatomic particle is exposed to an electric and magnetic field, its electric charge causes it to feel a force. There are two sorts of electric charges: positive and negative. The electric field outside the sphere is the same as the field from a point charge with a net charge of Q, according to Gauss' law, whereas the electric field inside the sphere is zero. For a solid or hollow sphere, this conclusion holds valid.

To learn more about charge use:

https://brainly.com/question/25922783

#SPJ1

how many ( ) capacitors can be charged from a new - , - battery before the battery is likely exhausted of its stored energy? assume the charging operation has a 50% efficiency. (within three significant digits)

Answers

The capacitor is used to store charge.

What is a capacitor?

We have to know that the capacitor is the kind of device that can be used to store the electrical charges. As such, the capacitor can be able to be charged from a battery.

This question is incomplete and the mathematical details of the problem are missing. However, we should know that the efficiency of the charging would depend on the kind of battery that has been used and the nature of the capacitor as we have in the question above here.

Learn more about capacitor:https://brainly.com/question/17176550

#SPJ1

Question 1 (1 point)
A massive asteroid in our solar system's asteroid belt, having an estimated mass of 2.6 x
1021 kg and an orbital speed of 14900 m/s. Determine the amount of kinetic energy
possessed by the asteroid.

Answers

Answer:

17.8 x 10^29 J

Explanation:

The kinetic energy (KE) of an object can be calculated using the formula:

KE = 0.5 * m * v^2

where m is the mass of the object and v is its velocity.

In this case, the mass of the asteroid is 2.6 x 10^21 kg, and its velocity is 14900 m/s. Plugging these values into the formula:

KE = 0.5 * 2.6 x 10^21 kg * (14900 m/s)^2

KE = 0.5 * 2.6 x 10^21 kg * 22.11 x 10^7 m^2/s^2

KE = 0.5 * 2.6 x 10^21 kg * 22.11 x 10^7 m^2/s^2

KE = 17.8 x 10^29 J

The asteroid possesses 17.8 x 10^29 J of kinetic energy.

Aɳʂɯҽɾҽԃ Ⴆყ ɠσԃKEY ꦿ

consider a 20 mm x 20 mm x 1 mm silicon die that dissipates 50 w. the electrical circuitry is on the back side of the die and all the heat is transferred from the front side and is dissipated from there. if the thermal conductivity of silicon is 125 w/moc, what is the temperature difference across the die?

Answers

A temperature difference (T) is the result of subtracting two independent isolated temperature measurements or measuring the amount of temperature rise or decline.

The two layers are the same thickness, but the materials are not. A's thermal conductivity is double that of B's. The temperature difference between the two ends of the wall in thermal equilibrium is 36o C. Determine the beginning and end temperatures, as well as the sample mass and energy provided. Subtract the end and starting temperatures to get the temperature change (T). Multiply the temperature difference by the mass of the sample. Distribute the heat/energy supplied by the product.

To calculate the temperature difference, just subtract the smaller figure from the bigger one, in this example 19 degrees Celsius from 25 degrees Celsius. This results in a six-degree Celsius temperature differential.

Learn more about heat/energy  from here;

https://brainly.com/question/25384702

#SPJ4

advantages and disadvantages of being firstborn​

Answers

Answer:

Advantages of being firstborn:

Increased attention and nurturing from parents, as they are often more invested in the success of their first child.Higher levels of academic and intellectual stimulation, as parents may provide more resources and opportunities for learning.Greater responsibility and maturity, as the firstborn often has to help care for younger siblings and take on leadership roles in the family.

Disadvantages of being firstborn:

Increased pressure to set a good example, both academically and behaviorally, for younger siblings.Less individual attention from parents as more children are born and added to the family.More conflict with younger siblings as the firstborn may feel resentment about having to share resources and attention.A lack of opportunities for leadership and responsibility later in life, as younger siblings may fill these roles.

Explanation:

Answer:

Advantages and disadvantages of being firstborn

Explanation:

Advantages of being a firstborn include having higher self-esteem and academic achievements, being seen as more responsible, and receiving extra attention from parents.

Disadvantages of being a firstborn include the pressure to live up to high expectations and the possibility of feeling resentful that their younger siblings get more freedom.


The soil sample was contaminated with equal amounts of caesium-137 and
iodine-131
Explain how the risk linked to each isotope has changed between 1986 and 2018
Both isotopes emit the same type of radiation.

Answers

Both caesium-137 and iodine-131 emit ionizing radiation, which can damage living tissue and increase the risk of cancer.

What are isotopes?

Isotopes are members of the same element's family but have variable numbers of neutrons despite having the same number of protons.

Iodine-131 and caesium-137 both produce ionizing radiation, which can harm living things and raise the risk of cancer.

Due to their varied half-lives and processes of decay, each isotope's danger has changed between 1986 and 2018 despite this.

Caesium-137 degrades gradually over time since it has a longer half-life of roughly 30 years. Iodine-131, on the other hand, degrades swiftly because of its significantly lower half-life of only around 8 days.

Thus, the risk has diminished over time as a result of radioactive decay.

For more details regarding isotopes, visit:

https://brainly.com/question/11680817

#SPJ9

what is the magnitude of the acceleration experienced by an electron in an electric field of 750n/c? how does the direction of the acceleration depends on the direction of the field at that point?

Answers

The magnitude of the acceleration experienced by an electron in an electric field of 750 N/C is approximately 1.318 × 10¹⁴ m/s².  

If the electric field is in the direction of positive x-axis, the electron will be accelerated in the negative x-axis direction. If the electric field is in the direction of positive y-axis, the electron will be accelerated in the negative y-axis direction, and so on.

The magnitude of the acceleration experienced by an electron in an electric field can be calculated using the formula:

a = F/m

where F is the force experienced by the electron in the electric field, and m is the mass of the electron.

The force experienced by an electron in an electric field is given by:

F = qE

where q is the charge of the electron, and E is the electric field strength.

The mass of an electron is approximately 9.11 × 10⁻³¹ kg, and the charge of an electron is -1.602 × 10⁻¹⁹ C.

Substituting these values, we get:

F = (-1.602 × 10⁻¹⁹ C) × (750 N/C) = -1.2015 × 10⁻¹⁶ N

a = F/m = (-1.2015 × 10⁻¹⁶ N) / (9.11 × 10⁻³¹ kg) ≈ -1.318 × 10¹⁴ m/s²

Therefore, the magnitude of the acceleration experienced by an electron in an electric field of 750 N/C is approximately 1.318 × 10¹⁴m/s².

The direction of the acceleration of the electron depends on the direction of the electric field at that point. By convention, the direction of the electric field is the direction in which a positive charge would experience a force. Since the charge of an electron is negative, the force experienced by an electron in an electric field is opposite in direction to the electric field.

Learn more about electric field here :

brainly.com/question/15800304

#SPJ4

Can someone answer please

Answers

Addition work required to move spring by extra 10cm is 12J.

Define sprint constant.

A restoring force that is proportional to the spring's displacement is stored in a spring when it is compressed or relaxed. The force needed to extend or compress a spring by a unit length is specified by the spring constant. The stiffness constant is another name for it.

According to Hooke's Law, the force required to compress or lengthen a spring is inversely related to the length of the spring. By deducting the initial work from the overall job or the completed work, additional work can be computed.

Work done = 1/2 kx^2

x1 = 10cm = 0.1m

x2 = 10+10 = 20cm = 0.2m

W1 = 4J

W1 = 4 = 1/2 k *0.1*0.1

k = 4*2 /0.01 = 800N/m

W2 = 1/2 *800*0.2*'0.2

W2 = 400*0.04 = 16J

So required work is W = W2-W1

W 16-4 = 12J

To learn more about sprint constant use link below:

https://brainly.com/question/22712638

#SPJ1

how large a cargo can it lift, assuming that the skin and structure of the balloon have a mass of 950 kg ? neglect the buoyant force on the cargo volume itself.

Answers

The total lift capacity of a balloon is determined by the amount of lift generated by the hot air or other lighter-than-air gas inside it.

The buoyancy force of a spherical balloon filled with helium is equal to the weight of the helium (Fb = mhg), where mh is the mass of helium, and g is the acceleration due to gravity. The total lifting force (Ft) of the balloon is equal to the buoyancy force of the helium plus the weight of the balloon structure (Ft = Fb + mb g), where mb is the mass of the balloon structure. Therefore, the total lifting force of the balloon is:

[tex]Ft = mhg + mb g[/tex]

The maximum cargo mass (mc) that can be lifted by the balloon is equal to the total lifting force divided by the acceleration due to gravity:

[tex]mc = \frac{Ft}{g} =\frac{ (mhg + mb g)}{g} \\ = mh + mb[/tex]

For a balloon with a radius of 7.15 m, filled with helium and a structure mass of 950 kg, the maximum cargo mass that can be lifted is:

[tex]mc = mh + mb = 0 + 950 kg = 950 kg[/tex]

Threrefore, the total lifting force of the balloon is:950kg

learn more about acceleration Refer:brainly.com/question/30660316

#SPJ4

complete question:A spherical balloon has a radius of 7.15 m and is filled with helium. How large a cargo can it lift, assuming that the skin and structure of the balloon have a mass of 950 kg? Neglect the buoyant force on the cargo volume itself.

The time needed for a water wave to change from the equilibrium level to the crest is 0.5731 s.
1. What is the period of the wave? Answer in units of s.
2. What is the frequency of the wave? Answer in units of Hz.

Answers

The period of wave is 2.2924s and the wavelength of the wave 0.436Hz.

Time and wavelength

A wavelength's worth of space separates the equilibrium and the crest.

As a result, the amount of time needed to get there would be

t=T/4

0.5731=T/4

T= 2.2924s,

where T is the time period.

The frequency is now determined by f=1/T

f=1/2.2924

f =0.436Hz.

The distance covered by a wave during one revolution is referred to as its wavelength. To put it another way, we can say that the wavelength is the distance between two consecutive crests and troughs.

The following formulas, f = v, make it simple to determine the frequency if we are aware of the wave's velocity and wavelength beforehand. After calculating the frequency, we can use T = 2 = 1 f to calculate the time period.

For more information on wavelength kindly visit to

https://brainly.com/question/4112024

#SPJ1

suppose a 59.5 kg gymnast climbs a rope. (a) what is the tension (in n) in the rope if he climbs at a constant speed?

Answers

The required tension in the rope if he climbs at constant speed is said to be 583.7 N.

The mass of the gymnast is given as 59.5 kg.

It is said that he climbs a rope at constant speed. This speed is to be calculated.

An object is said to be moving at a constant pace when it covers the same distance in the same amount of time. When moving at a constant pace, an object covers a fixed distance in a fixed amount of time.

The action-reaction pair of forces operating at either end of the aforementioned elements can also be thought of as tension. A string, rope, chain, or other similar object, or both ends of a rod, truss member, or other equivalent three-dimensional object, transmits tension when they pull in the same direction.

Drawing a free-body diagram has allowed us to:

T - m g = 0

T = m g = 59.5(9.81) = 583.7 N

Thus, the tension in the rope if he climbs at constant speed is said to be 583.7 N.

To know more about tension:

https://brainly.com/question/29526581

#SPJ4

a 1000-kg car is moving at 15 km/h. if a 2000-kg truck has 23 times the kinetic energy of the car, how fast is the truck moving? 51 km/h 72 km/h 61 km/h 41 km/h

Answers

Answer:

51 km/hr

Explanation:

car:  KE = 1/2mv² = 1/2(1000 kg)(15 km/hr)² = 112500

truck:  KE = 23(112500) = 2587500

KE = 1/2mv²  →   v² = 2(KE)/m  →   v = √2(KE)/m

v = √2(2587500)/(2000 kg) = 50.9 ≈ 51 km/hr

the largest object in the asteroid belt is ceres with a radius of 470 km and a mass of 9.384*10^20 kg. what is the weight, in newtons, of a 160. kg astronaut standing on ceres

Answers

The largest object in the asteroid belt is ceres with a radius of 470 km and a mass of [tex]9.384*10^2^0 kg[/tex]. The weight of a 160. kg astronaut standing on ceres is 43.2 N.

The weight of the astronaut on Ceres can be calculated using the formula:

w = m * g

here,

w is weight of the astronaut,

m is mass of the astronaut, and

g is gravitational acceleration on Ceres.

The gravitational acceleration on Ceres:-

[tex]F = G * (m1 * m2) / r^2[/tex]

here,

F is gravitational force between two objects,

G is gravitational constant,

m₁ & m₂ are masses of the two objects, and

r is distance between them.

For an object of mass m near the surface of a spherical object of mass M and radius R, the distance r can be approximated as (R + h).

For Ceres, the gravitational acceleration:-

[tex]g = G * M / R^2[/tex]

here,

G is gravitational constant,

M is mass of Ceres, and

R is radius of Ceres.

Reserving values given:-

[tex]g = (6.67430 × 10^-^1^1^ ^m^3/(kg s^2)) * (9.384 × 10^20 kg) / (470000 m)^2[/tex]

[tex]g = 0.27 m/s^2[/tex]

Now, weight of the astronaut as:

w = m * g

[tex]w = 160 kg * 0.27 m/s^2[/tex]

w = 43.2 N

Therefore, the weight of a 160 kg astronaut standing on Ceres is approximately 43.2 newtons.

To know more about mass please refer: https://brainly.com/question/22159613

#SPJ4

consider a circuit in which two light bulbs with equal resistance values are connected in parallel. if one of the light bulbs burns out, by what factor is the brightness of the other bulb multiplied?

Answers

A circuit in which two light bulbs with equal resistance values are connected in parallel. if one of the light bulbs burns out, By factor (2) is the brightness of the other bulb multiplied.

When two identical light bulbs are connected in parallel, the total resistance of the circuit is half of the resistance of each individual bulb. If one of the bulbs burns out, the total resistance of the circuit doubles, which means that the current through the remaining bulb is halved. The brightness of a light bulb is directly proportional to the current passing through it, so the brightness of the remaining bulb will be reduced by a factor of 2.

I = V/R

If both bulbs have the same resistance R and the same voltage V is applied to each, then the current passing through each bulb is:

I = V/R

When both bulbs are connected in parallel, the total current in the circuit is the sum of the currents through each bulb:

[tex]I_t_o_t_a_l = I_1 + I_2[/tex]

here,

[tex]I_1[/tex] & [tex]I_2[/tex] are currents passing by each bulb.

Reserving Ohm's law:-

[tex]I_t_o_t_a_l = V/R + V/R[/tex]

Simplifying:-

[tex]I_t_o_t_a_l = 2V/R[/tex]

The power P dissipated by each bulb is given by:

[tex]P = IV = V^2/R[/tex]

So the brightness of each bulb is proportional to [tex]V^2[/tex]. If one bulb burns out, the voltage across the remaining bulb remains the same, but the resistance of the circuit doubles, so the current passing through the remaining bulb is halved. This means that the power dissipated by the remaining bulb is reduced by a factor of 2, which corresponds to a reduction in brightness by the same factor. Therefore, the brightness of the remaining bulb is reduced by a factor of 2.

To know more about resistance please refer: https://brainly.com/question/11431009

#SPJ4

4) based on your data, compare the superposition principle for the electric fields and electric potential?

Answers

The electric field follows vector superposition while the voltage follows scalar superposition, which is the difference between the two superpositions (i.e., The net electric field at any point is the vector sum of the electric field due to the individual charges).

What is Electric field?

The term "electric field" refers to the physical field that surrounds electrically charged particles and acts to either attract or repel all other charged particles in the field (or E-field). One of the four fundamental interactions, or forces, of nature is the electromagnetic field, which manifests in both electric and magnetic fields. Electric fields, which are significant in many parts of physics, are used in electrical technology.

For instance, in atomic physics and chemistry, the electric field serves as the attractive force that holds the atomic nucleus and electrons of an atom together.

Moreover, it is the force that causes molecules to form when atoms bind chemically.

To learn more about Electric field visit;

https://brainly.com/question/15800304

#SPJ4

For both waves on strings and sound waves in tubes,
A. The mode number is independent of the wavelength.
B. A higher mode number means a shorter wavelength.
C. A higher mode number means a longer wavelength.

Answers

The correct statement is B.

A higher mode number means a shorter wavelength.

What is Wavelength?

Wavelength is an important characteristic of all types of waves, including electromagnetic waves (such as light and radio waves) and mechanical waves (such as sound waves and water waves). In general, the wavelength of a wave is determined by the source of the wave, the medium through which it travels, and the frequency of the wave.

The correct statement is B. A higher mode number means a shorter wavelength.

In both cases, the mode number refers to the number of segments, or nodes, into which the wave can be divided. The wavelength, on the other hand, refers to the distance between two adjacent peaks or troughs of the wave.

When the mode number increases, the number of segments or nodes in the wave increases, which means that the wavelength must decrease in order to maintain the same frequency of the wave. This is because the total length of the string or tube remains the same, and so the length of each segment must decrease as the number of segments increases. Therefore, a higher mode number corresponds to a shorter wavelength.

Learn more about Wavelength from given link

https://brainly.com/question/10750459

#SPJ1

1. find the distance between a 0.300 kg billiard ball and a 0.400 kg billiard ball if the magnitude of the gravitational force between them is 8.92 x 10-11 n.

Answers

The distance between two pool balls are separated by 0.0424 m.

By gravitational force, what do you mean?

The gravitational pull draws any two mass-containing things together. It mentions the gravitational force. The force will always be applied along the line joining the two masses in the direction of the other mass, according to the formula F=Gm1m2r2.

The following formula can be used to determine the gravitational force between two objects:

F = G * (m1 * m2) / r²

where F is the gravitational force's strength, G is the gravitational constant (6.67 x 10-11 N×m2/kg), m1 and m2 are the objects' masses, and r is the separation between them.

To determine the separation between the two pool cues To account for r, we can rearrange this expression as follows:

Represents the objects' masses, while r denotes the separation between their mass centres.

Rearranging this formula to solve for r will allow us to get the distance between the two pool balls:

r = √(G × m1 × m2 / F)

Substituting the given values, we get:

r = √(6.67 x 10⁻¹¹ N*m²/kg² × 0.300 kg × 0.400 kg / 8.92 x 10⁻¹¹ N)

r = 0.0424 m

To know more about gravitational force visit:-

https://brainly.com/question/12528243

#SPJ1

An object has 10 J of GPR.What would be its GPE if its mass was halved?

Answers

If the mass of the object is halved, its new GPE would be 5 J. The gravitational potential energy (GPE) of an object near the surface of the Earth is given by the formula:

GPE = mgh

where:

m is the mass of the object

g is the acceleration due to gravity (9.81 m/s² near the surface of the Earth)

h is the height of the object above some reference level (usually taken to be the ground level)

The given information of the object having 10 J of gravitational potential energy (GPE) is insufficient to calculate its mass or height. As a result, we cannot use the above formula to calculate the object's GPE if its mass is halved.

However, we can take advantage of the fact that an object's GPE is directly proportional to its mass. That is, if we cut the object's mass in half, its GPE will be cut in half as well. This is mathematically expressed as:

GPE2 = (1/2) GPE1

where:

GPE1 is the object's first GPE.

GPE2 is the object's new GPE after its mass has been halved.

As a result, if the object's GPR is considered its initial GPE and its mass is halved, its new GPE is:

GPE2 = (1/2) GPR

Substituting the given value of GPR = 10 J, we get:

GPE2 = (1/2) x 10 J = 5 J

So, if the mass of the object is halved, its new GPE would be 5 J.

To Learn More About acceleration click

https://brainly.com/question/12550364

#SPJ4

A 0.112-kg billiard ball moving at 154 cm/s strikes a second billiard ball of the same mass moving in
the opposite direction at 46 cm/s. The second billiard ball rebounds and travels at 72 cm/s after the
head-on collision.

Determine the post-collision velocity of the first billiard ball.

Answers

The post-collision velocity of the first billiard ball is 272 cm/s.

Define Velocity

Velocity is a vector quantity that describes an object's speed and direction of motion.

We can solve this problem by using the law of conservation of momentum, which states that the total momentum of an isolated system remains constant.

The momentum of an object is defined as the product of its mass and velocity:

p = m * v

The total initial momentum of the system is the sum of the momenta of the two billiard balls before the collision:

p_initial = m * v1 + m * v2

where m is the mass of each billiard ball, v1 is the initial velocity of the first billiard ball, and v2 is the initial velocity of the second billiard ball.

After the collision, the first billiard ball will rebound with a velocity v1', and the second billiard ball will rebound with a velocity v2'. The total final momentum of the system is the sum of the momenta of the two billiard balls after the collision: p_final = m * v1' + m * v2'

Since the law of conservation of momentum applies, we can set the initial momentum equal to the final momentum

p_initial = p_final

Substituting the given values, we get:

m * v1 + m * v2 = m * v1' + m * v2'

Simplifying, we get:

v1' = (m * v1 + m * v2 - m * v2') / m

v1' = v1 + (v2' - v2)

Plugging in the given values, we get:

v1' = 154 cm/s + (72 cm/s - (-46 cm/s))

v1' = 272 cm/s

Learn more about velocity here:

https://brainly.com/question/17127206

#SPJ1

Sarah rides her horse with a constant speed of 8 km/h. How far can she travel in 1 1/2 hours?

Answers

Answer:

12 Kilometers

Explanation:

To find the distance Sarah travels in a given time, we can use the formula:

distance = speed * time

In this case, the speed of the horse is 8 km/h and the time Sarah travels is 1 1/2 hours.

distance = 8 km/h * 1 1/2 hours = 12 km

So, Sarah can travel 12 kilometers in 1 1/2 hours.

What is the sum of kinetic and potential energy?

Answers

Answer:

 Kinetic energy plus potential energy equals total mechanical energy. The equation for this is KE + PE = Total Mechanical Energy, where KE is kinetic energy, PE is potential energy, and Total Mechanical Energy is the total amount of energy present.

Other Questions
How would you cope with changes in a family relationship during lockdown? In EACH answer, also indicate the improving these coping skills could help you to accept the changes. A school newspaper reporter decides to randomly survey 13 students to see if they will attend Tet (Vietnamese New Year) festivities this year. Based on past years, she knows that 23% of students attend Tet festivities. We are interested in the number of students who will attend the festivities. Part (a) Part (b) List the values that X may take on. O X =0, 1, 2..... 23 x = 1, 2, 3....23 x = 1, 2, 3....13 OX0.1.2..... 13 OO Part (c) Give the distribution of X. X-OX (0:0) Part (d) How many of the 13 students do we expect to attend the festivities? (Round your answer to the nearest whole number.) student(s) O Part (e) Find the probability that at most 3 students will attend. (Round your answer to four decimal places.) Part (0) Find the probability that more than 2 students will attend. (Round your answer to four decimal places.) A load is applied to a rigid bar that is symmetrically supported by three steel rods, as shown. The cross-sectional area of each of the rods is 1.2 in2. Calculate the maximum load P that may be applied (a) using an elastic approach with an allowable stress of 22, 000 psi and (b) using an ultimate strength approach (inelastic) with a factor of safety of 1.85. Assume a ductile material with a yield stress of 36,000 psi. on september 30, the manager reports that call center hold times for the summer construction season averaged 42 seconds, with 30 percent of all calls not being put on hold at all but 2 percent of calls exceeding 90 seconds of hold time. the plan is rated mostly successful. developing an action plan b. on april 1, the manager sees that nine contingent call center workers have been hired and completed training. on june 30, call center data show 5 percent of calls are on hold for more than 90 seconds. reviewing progress c. based on data on how long people wait before hanging up, the manager decides the maximum time on hold should be 90 seconds. appraising performance d. a pool of twelve contingent call center workers who work at home will be hired and trained before april 15. these employees can be activated anytime hold times threaten to exceed 90 seconds. ) Joe bought six bunches of seedless blackgrapes for $15. How many bunches canAnjali buy if she has $7.50? From the list of words lettered A to D, choose the word that is most nearly opposite in meaning to the underlined word and that will at the same time, correctly fill the gap in the sentence. Obi's family is known for their audacity, so one is surprised at his A.cowardice B.moodiness C.insolence D.irritabilty What happens if the animals are not our pets but we are theyres??? The depth of a certain part of the Earth's seabed is 36,078 feet. How deep is it in (a) fathoms ? (b) leagues (marine)? One cubic foot holds 7.48 gallons of water, and 1 gallon of water weighs 8.33 pounds. How much does 2.2 cubic feet of water weigh in pounds? In tons? Which setting would best develop the theme in a play that shows the downfallof a tragic hero whose weakness is laziness?OA. A beach resortOB. A working farmOC. A universityD. A circus compare and contrast educational reform in the "1900s" and education reform of the 1800s. compare the goals of the goals of the reforms being done and impact thoes reforms had on public education what does it mean that no single set of actual institutions practices or values embodies democracy the real estate manager of a commercial building needs to fill three empty spaces. the options for each store are: In 4 or more complete sentences, describe the process of protein synthesis and explain how transcription and translation creates protein in a train yard there are tank cars, boxcars, and flatcars. how many ways can a train be made up consisting of tank cars, boxcars, and flatcars? (in this case, order is not important.) Name and describe four trade barriers. which of the following statements concerning operations and supply chain management is true? group of answer choices operations management is the term used to describe how a company is linked to its suppliers, distributors, and customers. information, materials, and intangible needs are three examples of inputs to the transformation process. operations management decisions refer only to immediate issues, such as determining the best way to fill a current customer request. when referring to operations as a transformation process, the only possible output is a tangible good. Which noun is plural?A pack of dogs is eating avocadoes in the road. Find EF, please!!!!!!!!!! verbes pronominaux (se)