A worker moves a table, sliding it across the level floor a distance of 3.0 m using a force of 45 N. Calculate the work done by the worker.

Newton's third law states that there is always an equal and opposite reaction for every force.

Newton's third law states that for every force there will be equal reaction in the opposite direction. This law is beautifully used to launch a rocket in space. Rocket exerts a force on the earth to get the enough reaction force from the earth to generate the orbital velocity. The action-reaction law also takes place when we fire a bullet from a gun.

There are other law of Newton. First law is known as the law of inertia, whereas second law states that time rate of change of momentum of an object equal to the force exerted on the object.

To know more about Newton's third law, here

https://brainly.com/question/29768600

#SPJ4

To safely cross a canyon 1.00 km wide with a starting point 0.750 km lower than the opposite side, the minimum constant acceleration in the x-direction that must be provided by the engine of the motorcycle is 9.8 m/s² (approximately the acceleration due to gravity).

The motorcycle must have a minimum constant acceleration in the x-direction of 9.8 m/s² in order to safely cross the canyon. This acceleration is necessary to counteract the force of gravity and ensure that the motorcycle and rider can clear the distance of the canyon and land on the opposite side at a point that is 0.750 km higher than the starting point. The motorcycle is assumed to be fired horizontally from the starting point, and the rider must be able to maintain balance throughout the crossing.

To safely cross a canyon 1.00 km wide with a starting point 0.750 km lower than the opposite side, the minimum constant acceleration in the x-direction that must be provided by the engine of the motorcycle is 9.8 m/s² (approximately the acceleration due to gravity). This is assuming that the motorcycle is fired horizontally from the starting point and that the rider is able to maintain balance throughout the crossing.

Learn more about Rocket Motorcycle Canyon Crossing here:

https://brainly.com/question/13016913

#SPJ4

Answer:

The mineral's hardness is greater than 4 but less than 5.5 on the Mohs hardness scale.

No, his potential and kinetic energy consumption will not be the same for both paths.

Kinetic energy is a form of energy associated with the movement of objects or particles. It is the energy of an object in motion, and is equal to the work done to accelerate the object from an initial state of rest. Kinetic energy is a scalar quantity, meaning it has magnitude but no direction.

No, his potential and kinetic energy consumption will not be the same for both paths. Climbing a mountain in a zigzag path will require more energy than climbing straight up the side, because he will have to change his direction and velocity, requiring more energy for acceleration and deceleration. Furthermore, it will take longer to reach his destination, resulting in more energy expended.

To learn more about kinetic energy

https://brainly.com/question/20658056

#SPJ4

The International System of Units (SI unit) is a scientific method of expressing the magnitudes or quantities of significant natural phenomena. SI units include the kilogram, second, ampere, and kelvin, among others.

The International System of Units, abbreviated SI in all languages and sometimes pleonastically as the SI system, is the modern version of the metric system and the world's most widely used measurement system. The SI is a coherent system of measurement that begins with seven base units: the second (symbol s, the unit of time), the metre (m, length), the kilogram (kg, mass), the ampere (A, electric current), the kelvin (K, thermodynamic temperature), the mole (mol, substance amount), and the candela (cd, luminous intensity).

Here,

The International System of Units (SI unit) is a scientific system for expressing the magnitudes or quantities of major natural phenomena. SI units include the kilogram, second, ampere, kelvin, and so on.

To know more about SI units,

https://brainly.com/question/12750330

#SPJ4

Three formulas of newton's law of motion are:- a) v = u + at, b) S = ut +0.5at² c) v² = u² + 2as

Newton's first law of motion defines the relation between final velocity(v) of an object after some time(t), if the initial velocity of the object is u and acceleration is a.

v = u + at

Newton's second law of motion is used to determine the distance(S) travelled by an object in accelerated motion for time(t), having an initial velocity u.

S = ut +0.5at²

Newton's third law gives the relationship between, final, initial velocities, acceleration(a), and the distance(s) travelled by the object.

v² = u² + 2as

To know more about acceleration, here

https://brainly.com/question/12550364

#SPJ4

Answer:Projectile motion is the motion of an object thrown (projected) into the air. After the initial force that launches the object, it only experiences the force of gravity. The object is called a projectile, and its path is called its trajectory. As an object travels through the air, it encounters a frictional force that slows its motion called air resistance. Air resistance does significantly alter trajectory motion, but due to the difficulty in calculation, it is ignored in introductory physics.

Explanation:

B)

The distance between the first crest (or trough) and the following crest is known as a wave's wavelength (or trough). In this instance, the distance between each crest is specified as 1 m. The wave's wavelength is therefore 1 m.

To learn more about wavelength refer:

brainly.com/question/10750459

#SPJ4

The efficiency of this light bulb is 25% .

Given data :

output = 30j

Input = 120j

Efficiency  = output / input x 100

  = 30 / 120 x 100

  = 25%

Learn more about efficiency of a light bulb refer to :

https://brainly.com/question/10300122

#SPJ1

B. The sun and the moon appear to be nearly the same size.

The Sun and the Moon appear to be nearly the same size from the Earth's perspective because the Moon is about 400 times closer to the Earth than the Sun, and the Sun is about 400 times larger than the Moon. This means that the Sun and the Moon appear to have the same size in the sky, which makes possible the phenomenon of a solar eclipse, where the Moon completely covers the Sun. Even though the sun is much larger than the Moon, but its distant location makes it appear small in the sky while the Moon is much smaller but it is much closer to us, that's why they appear to be the same size.

The gravitational force is altered more by an increase in the separation between the objects than by an equivalent increase in mass.

It is based on the mass and gravitational acceleration of the item. Mass is a fundamental, immutable feature. Weight depends on gravitational force, which is a force. The mass has a direct relationship with this force. The force of gravity will be stronger the more mass an item has. As a result, when we compare the distance traveled by objects of various masses, gravity is shown to be irrelevant. Air resistance, often known as drag, is a significant component of the force.

The slope tells us how much force, in newtons, is applied to each kilogram of mass. A thing's mass is a measure of how much matter there is in it. This is a physical trait that cannot be altered. Mass cannot be created or destroyed. The combination of mass and gravitational acceleration produces weight.

To know more about gravity on

https://brainly.com/question/28860845

#SPJ4

15 is the horizontal distance from the cliff did the projectile traveled.

In projectile motion, use the following formula to determine the horizontal distance:

Divide the gravity-induced acceleration (g) by the vertical height (h) multiplied by two.

You may calculate the horizontal distance by taking the square root of the step 1 result and multiplying it by the projection's initial velocity, u.

Using the Pythagorean Theorem, the slope length is determined by multiplying the rise and run distances, where the rise and run are the vertical and horizontal distances, respectively.

20/2 = 10 * 1.5 = 15.

To learn more about horizontal distance visit:

brainly.com/question/24784992

#SPJ1

They each pull equally hard, forcing the Sun to shift slightly. when the Sun's gravitational pull holds the planets in their orbits,

The average period of the solar cycles, including irradiance, sunspots, solar flares, radio flux, and polarity flip, is 11 Earth years. According to scientists, the Sun's internal processes and atmospheric interactions are what cause various solar activity. According to the authors, these behaviours and cycles also have an outside origin. Because planets need external constant loading to support their ongoing internal processes and dynamic systems. Here, the Sun's dynamical system and internal processes are activated by the planets' uneven gravitational fields, particularly by the biggest planet in the solar system, Jupiter, which has 67 moons and an orbital period of 11.856 years. As a result, distinct solar cycles are produced.

Learn more about Gravitational here:

https://brainly.com/question/3009841

#SPJ4

Two identical metal spheres a and b are in contact, both are initially neutral. When 1.0×1012 electrons are added to sphere a, then the two spheres are separated : false

The physical property of matter that causes it to experience a force when placed in an electromagnetic field is called as electric charge.

When 1.0x1012 electrons are added to sphere a, then that sphere becomes negatively charged. When two spheres are separated,  electrons will redistribute themselves to maintain equilibrium. This results in both spheres having net charge. Some of the electrons from sphere a will move to sphere b, making it negatively charged.

So, when 1.0×1012 electrons are added to sphere a, then the two spheres are separated is false.

To know more about charge, refer

https://brainly.com/question/25922783

#SPJ4

According to the International System of Units, the SI unit of distance is a metre. Surprisingly, by using this as the base unit and some equations, many other derived units or quantities such as volume, area, acceleration, and speed are formed.

The magnitude or size of displacement between two positions is defined as distance. It is important to note that the distance between two points is not the same as the distance traveled between them. The total length of the path traveled between two points is referred to as the distance traveled. The total length of an object's actual path is referred to as distance. The displacement of an object between two points is the straight line (shortest) distance between those points, directed from one position to the other. The SI unit for measuring distance and displacement is the meter (m).

Here,

According to the International System of Units, a metre is the SI unit of distance. Surprisingly, by using this as the base unit and some equations, many other derived units or quantities, such as volume, area, acceleration, and speed, can be formed.

To know more about distance,

https://brainly.com/question/11667907

#SPJ4

It will take 3/2 miles approximately to stop the train safely, if the deceleration of the train is 833.33 miles/h² and initial speed of the train 50 mph.

Initial velocity of the train, u = 50 mph

Deceleration of the train, a = - 833.33 m/h²

Let the final velocity of the train, = v

By the third equation of motion, which related the final velocity, with initial velocity, acceleration ( or deceleration), and the distance covered between two velocities.

v² = u² + 2aS

v² = 50² + 2 × (-833.33) × S

0 = 2500 - 1633.33 ×S

S = 2500/1633.33

S = 1.5 miles

Hence option C is correct.

__ The given question is incomplete, the complete question is

"If the safe deceleration to stop a train is 833.33 m/h², then it takes a train going at 50 mph approximately ___ to stop safely.

To know more about deceleration, here

https://brainly.com/question/4403243

#SPJ4

Some common examples of latency are while playing games, audio processing.

Latency is the delay or lag time between when a request is made and when a response is received. An example of latency can occur in network communications, where data packets are sent from one device to another and there is a delay between when a packet is sent and when it is received. Another example of latency can occur in computer systems, where there is a delay between when a command is given and when the computer completes the task. An example of latency can occur while playing online games, where there is a delay between when a player takes an action and when that action is reflected on other player's screens, this is known as "ping". Another example of latency can be seen in audio processing, where there is a delay between the time a sound is made and when it is heard by the listener.

To know more about Latency click here:

https://brainly.com/question/28234702#

#SPJ4

Conduction is the charging-by-contact method of charging where the uncharged object takes C: the same type of charge; while induction is the charging-without-contact method of charging where the uncharged object takes A: the opposite charge.

Charging by conduction means to charge an uncharged object by placing it in contact with a charged object. Charging by induction means charging an uncharged object by bringing it close to a charged object without allowing the two objects to come into contact. In conduction, any new currents produced follow the original currents. On contrary, in induction, the new currents induced opposing changes in the original currents.

"

Complete question:

the student explains how conduction is the charging by contact so the uncharged object takes select one type of charge; while induction is the charging without contact so the uncharged object takes select one type of charge.

A-  the opposite charge

B -  the neutral charge

C - the same type of charge

D - No charge

"

You can learn more about charging by conduction and induction at

https://brainly.com/question/16072774

#SPJ4

The tendency of moving objects is to continue moving. The simplest Newton's rule, known as inertia, governs motion. With inertia, an item starts going in one direction and needs an equal or stronger force to stop.

According to Newton's first law, unless compelled by an external force to change its state, an object will remain at rest or in uniform motion along a straight line.

A body's propensity to resist modifications to its state of motion is known as inertia. There is no net force applied on the object if all external forces cancel one another out.

The object will keep moving at a steady speed if there is no net force acting on it.

Learn more about Inertia:

brainly.com/question/2419201

#SPJ4

You will not need any mass to determine the mass of the stick to determine the mass of the meter stick itself.

A place at which the entire mass of the object or all of the masses of a system of particles appears to be concentrated is considered the center of mass of a body or system of particles.

Only Newton's second law, that also states that an item's mass is equal to its force divided by its mass, may be used to calculate its mass of the object, such as the stick. It is clear that we are unable to determine both force and acceleration values of the stick depicted in the question above. However, by adding more masses on the stick, it is also difficult to determine its mass.

To know more about meter stick refer to:

https://brainly.com/question/13563397

#SPJ4

Torque τ can be calculated using moment of inertia I and angular acceleration α.

Mathematically, τ = I α

Angular acceleration of a body is due to rotational motion. Moment of inertia is the tendency of the body to restrain the angular acceleration of that body. Torque is an analogous quantity to work and energy.

The steps to calculate torque from moment of inertia are given as, determine the known values such as the angular acceleration and the moment of inertia for the object in question, determine what unknown value we are trying to find, determine which equations we will need to solve for the unknown value and rearrange it if necessary, calculate the desired unknown value.

To know more about torque:

https://brainly.com/question/30187149

#SPJ4

Rest, motion and direction are the three different types of inertia.

Inertia is defined as the property of a material to remain in the same straight line at rest or in uniform motion unless acted upon by an external force. Rest Inertia is the inability of an object to change its rest state by itself is called rest inertia. Directional inertia is the inability of the body to change the direction of motion on its own. The inertia of movement is the inability of the body itself to change its state of motion is called motion inertia. These are the different types of inertia.

Learn more about the inertia in

https://brainly.com/question/3268780

#SPJ4

You need to follow some steps in order to reduce Network latency and improve your network performance.

Follow steps below to ensure Network latency reduction:

Identifying the source of latency: The first step in reducing network latency is to identify where the latency is coming from. This can be done by running a network analysis tool or by monitoring the network for bottlenecks.

Optimizing network infrastructure: Once the source of latency is identified, it is important to optimize the network infrastructure to reduce latency. This can include upgrading network devices, such as routers and switches, to improve performance, and optimizing network protocols to reduce overhead.

Minimizing distance: The distance data has to travel is a major contributor to latency. Reducing the physical distance between devices can greatly reduce latency.

Here are some other steps:

Optimizing routing: The routing of data is another important factor in reducing latency. By optimizing the routing of data, it is possible to reduce the number of hops it has to take, thereby reducing latency.

Caching and Content Delivery Network (CDN): Caching frequently accessed data can reduce the time it takes to access that data, thus reducing latency. Using a Content Delivery Network (CDN) can also help to reduce latency by replicating content to servers that are closer to the user.

Quality of Service (QoS) Policies: Implementing Quality of Service (QoS) policies can help to ensure that important data is prioritized, thus reducing latency.

TCP Optimization: By optimizing TCP settings like window size, it is possible to increase the amount of data that can be transferred at once, reducing the number of packets sent and received, thus reducing latency.

Learn more about Network latency here:

https://brainly.com/question/30122968

#SPJ4

A computer network with low latency is one that is built to quickly handle lots of data packets (latency).

These networks are intended to assist activities that require quick access to constantly changing data in close to real time. By moving processing work from the cloud to local devices, such laptops and smartphones, edge computing reduces latency for consumers. Consumers may increase the adaptability and affordability of their gadgets while still using them as dependable financial instruments by utilizing edge computing.

When compared to cloud services, which are concentrated on a single data center, data processing requires a more scattered network. It decreases latency and offers real-time response by removing the round-trip to the cloud. Edge computing, like an Internet of Things (IoT) device, controls compute and communication closer to where they will be utilized, which can speed up processing. Increased uniformity is a further advantage.

To know more about latency on

https://brainly.com/question/29781666

#SPJ4

The force on the object is 0.822 N.

Forces affect the motion of objects. They can cause movement. You can also slow down, stop, or change the direction of objects that are already moving. We say that a force changes its velocity because it changes the speed or direction of an object. Remember that acceleration is a change in velocity. F= mdv / dt

So m= 2.74 kg and dv= 16.49-16.19 = 0.30.

If time is 1 second,

F=2.74*0.3

= 0.822N

Therefore, the force on the object is 0.822 N.

Learn more about force

brainly.com/question/28875770

#SPJ4

The law of conservation of energy states that energy cannot be created or destroyed, only changed from one form to another.

Energy is the ability to do work. It is the capacity to cause change or to make things happen. Energy is present in many forms, such as thermal energy, radiant energy, electrical energy, chemical energy, mechanical energy, and nuclear energy. Energy is stored in different forms, such as potential energy, kinetic energy, and elastic energy.

The law of conservation of energy states that energy cannot be created or destroyed, only changed from one form to another. Therefore, the 600 joules of energy that were lost in the pulley system must have been converted into a different form of energy, such as heat or sound.

To learn more about energy

https://brainly.com/question/13881533

#SPJ4

The forces acting on the book as it is at rest on the table include gravity pushing down and the table pushing up, and these forces are balanced.

The book is under the influence of two forces. The downward force of the Earth's gravity and the upward force of the table's weight on the book are the two forces at play.

The table pulls on the book with an equal amount of force to that which the book pulls on the table, in accordance with Newton's third law. The book remains at rest on the table as a result of the net force being zero.

To know more about force visit:

https://brainly.com/question/13492374

#SPJ4

The normal stress is 2.92 psi and shear strength is 8.034 psi.

It is necessary to determine the normal stress and shear stress for plane a-a , which is in relation to the direction of the force at an angle 20°. We apply the conditions of equilibrium:

Using these equations we get :

∑[tex]F_{x} = 0[/tex] ⇒ V - 200. cos20° = 0

             ⇒ V = 187.938 lb

∑[tex]F_{y} = 0[/tex] ⇒ N - 200. sin20° = 0

             ⇒ N = 68.40 lb

We calculate the surface area of the cross section:

A = b.d/ sin20

   = 2*4/sin20

   = 23.39

The shear strength is calculated by formula:

Normal stress = N/A , where

N = Force acting on cross section

A = Surface area of the cross section

i.e. Normal stress = 68.40/23.39 = 2.92 psi

The shear strength is calculated by formula:

Shear strength = V/A, where

V = Shear force acting on cross section

A = Surface area of the cross section

i.e. Shear strength = 187.93/23.39 = 8.034 psi

So, the normal stress is 2.92 psi and shear strength is 8.034 psi.

To know more about stress visit:

https://brainly.com/question/13288741

#SPJ4

The application of Newton's 1st law is a) a cricket ball stops after going through some distance, for 2nd law is b) Force applied by the bullet on gun, for 3rd law is c) launching of a rocket from earth, respectively.

Newton's first law also known as the law of inertia. A balling rolling on the ground stops after some time due to the opposite force of friction working between the ball and the ground.

Newton's second law of force states that the rate of change of momentum of an object is equal to the force applied by the object. When a bullet is fired from a gun change in the momentum of the bullet generate the force that cause the bullet to be fired and to generate the recoil velocity in the gun.

Newton's 3rd law states the action-reaction relationship. When a rocket is launched from the earth, it applies a force on the ground that generate the enough reaction force that causes the rocket to generate  orbital velocity.

To know more about Force, here

https://brainly.com/question/13191643

#SPJ4