Answer:
lower, lower
Explanation:
When atmospheric pressure is lower, such as at a higher altitude, it takes less energy to bring water to the boiling point. Less energy means less heat, which means water will boil at a lower temperature at a higher altitude.
a galaxy that is a featureless spherical ball of stars would be called a type
Answer:
E0
Explanation:
Yes. The "0" indicates that it is spherical
When traveling north from the United States into Canada, you'll see the North Star (Polaris) getting _________. lower in the sky higher in the sky dimmer brighter
When traveling north from the United States into Canada, you'll see the
North Star (Polaris) getting higher in the sky .
This is because the polaris which is also known as North Star is located
very close to the north celestial pole. When an objects moves towards the
north , the polaris gets higher due to its upward northern location.
This is the major reason why when traveling north from the United States
into Canada, you'll see the North Star (Polaris) getting higher.
Read more about Polaris on https://brainly.com/question/1130377
Answer:
Higher
Explanation:
As you go further north, the Star Polaris rises in the sky. This is due to it being circumpolar meaning that the star doesn't move in the night sky (Often)
explain how the spray painting process makes use of static electricity
Answer:
The spray paint gun is charged positively, which causes every paint particle to become positively charged. Since the paint particles all have the same charge, they repel each other and produce a fine mist of paint which is sprayed towards the wall/car.
Answer:
xerography can i get brainliest
Explanation:
a 1.0 kg ball falls from rest a distance of 15 m. what was its change in potential energy?
Answer:
147 J
Explanation:
PE = mgh
PE = (1.0)(9.8)(15)
PE = 147 joules
Your friend has a rubber band stretched between two fingers. When you pluck the rubber band, it vibrates and makes sound. What would you have to do to make the sound a higher pitch?
To make a higher pitch, stretch the rubber band more.
To make a higher pitch, pluck the rubber band less hard.
To make a higher pitch, stretch the rubber band less.
To make a higher pitch, pluck the rubber band harder.
Answer:
I think it is To make a higher pitch, stretch the rubber band more
Explanation:
I'm not too sure. Sry if u got it wrong
Answer:
To make a higher pitch ,pluck the rubber band more
2 questions, 100 points
Gravitational force between objects ____________ as objects move farther apart, and it is ___________ between objects that are closer together.
increases, weaker
increases, stronger
decreases, weaker
decreases, stronger
In science, weight is measure in
Pounds
Kelvin
Newtons
Liters
Answer:
decreases, stronger
newtons
Explanation:
use these terms in to show they are related, radiant energy, solar collector, active solar heating system
Answer:
The term "solar collector" commonly refers to a device for solar hot water heating, but may refer to large power generating installations such as solar parabolic troughs and solar towers or non water heating devices such as solar air heaters. radiant energy is the energy of electromagnetic and gravitational radiation.Active solar heating systems use solar energy to heat a fluid;either liquid or air; and then transfer the solar heat directly to the interior space or to a storage system for later use. If the solar system cannot provide adequate space heating, an auxiliary or back-up system provides the additional heat.
What important role does each play in an exercise regiment?
Answer: There are five principles of fitness out of which two are overload principle and rest and recovery principle. Overload principle is one of the most important principle which tell that to gain and improve the fitness one should do the hard work.
Slowly and gradually the intensity and time of exercise are increased so that our body can adapt to the hard work. Overload principle plays an important role in improving the skills and improving performance during exercise and sports.
Rest and recovery principle is important to relax the body and release the stress that happens due to intense training like in case of weight lifting one day rest should be taken to repair and rebuild the muscles. This allows the body to encounter the fatigue and improve performance.
Explanation:
please help me please please, i will brainliest the right answer
Read this statement: Biotechnology uses primary clarifiers for biological nutrient removal.
Which part of the statement is not true?
Biological nutrients are found in wastewater.
Primary clarifiers remove biological nutrients.
Biological nutrients are part of biotechnology processes.
Biological nutrient removal is part of wastewater management.
Primary clarifiers removing biological nutrients is not true. Primary clarifiers
involves the use of processes such as sedimentation in order to remove
particles floating or other inorganic solids from the waste water.
Biological nutrients such as nitrogen and phosphorus are found in waste
water and removal of these important nutrients for other uses is a part of
waste water management.
The secondary clarifiers are the ones responsible for the removal of
biological nutrients in the waste water through biofiltration etc.
Read more on https://brainly.com/question/25085634
a measure of change in velocity in a measure of time is
[tex]\\ \sf\Rrightarrow Acceleration=\dfrac{\Delta V}{t}[)tex]
In simplified form
[tex]\\ \sf\Rrightarrow Acceleration=\dfrac{dv}{dt}[/tex]
The rate of change of velocity with respect to time period is called acceleration.SI units-m/s^2If your friend was on a skateboard and you pushed them with forward (away from your) with a force of 15N, would you feel a force? If so, how much and what direction? *
Yes. you would feel a force 20 N towards backward direction due to this.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity.
An external force is an agent that has the power to alter the resting or moving condition of a body. A spring balance can be used to calculate the Force. The Newton is the SI unit of force.
"When one body exerts a force on the other body, the first body experiences a force that is equal in size in the opposite direction of the force which is exerted," according to Newton's third law of motion.
Hence, according to Newton's third law of motion, when you pushed them with forward (away from your) with a force of 15N, you would feel a force of equal magnitude (20 N) in opposite direction (backward direction).
Learn more about force here:
https://brainly.com/question/13191643
#SPJ2
Can any1 tell if my answer is right
Answer:
The correct answer would be C. 5.0kg
Explanation:
The mass of an object never changes unless parts of the object are taken away. In other words, although the gravitational force is different on the moon then on the earth the mass of the object would remain the same.
A rectangular room twice as long as it is wide would contain 145 square feet more if each side were one foA rectangular room twice as long as it is wide would contain 145 square feet more if each side were one foot longer. What is the length of the room
The length of the room is 96 ft.
Let L be the length of the room and W be the width of the room.
Since the length is twice its width, L = 2W.
Its area A = LW
= 2W × W
= 2W²
If each side were increased by 1 foot, then its new area is A' = (L + 1)(W + 1)
= (2W + 1)(W + 1)
= 2W² + 3W + 1
Since the room would contain 145 ft more if each side were increased by 1 foot, then its new area is A' = A + 145 = 2W² + 3W + 1
2W² + 145 = 2W² + 3W + 1
145 = 3W + 1
3W = 145 - 1
3W = 144
W = 144/3
W = 48 ft.
Since its length L = 2W, substituting W = 48 into the equation, we have
L = 2(48)
L = 96 ft
So, the length of the room is 96 ft.
Learn more about length of a room here:
https://brainly.com/question/24375989
write down 4 situations where magnets are used in our daily life
Answer:
Magnets are used to make a tight seal on the doors to refrigerators and freezers
They power speakers in stereos, earphones, and televisions
Magnets are used to store data in computer's
magnets are used in the compass
Which of these ALL require direction? Force, Time, Acceleration Displacement, Velocity, Force Mass, Time, Speed Speed, Velocity, Distance
PLS ANSWER QUICK!!!!
Answer:
force, acceleration, displacement, velocity requires direction
What is the current in a 120V circuit if the resistance is 20Ω?
We have: [tex]I=\frac{U}{R}=\frac{120}{20}=6A[/tex]
ok done. Thank to me :>
Answer:
The Current is 6 Ampere.
Step-by-step explanation:
Given :
[tex]\small\red\bull[/tex] Voltage = 120V[tex]\small\red\bull[/tex] Resistance = 20ΩTo Find :
[tex]\small\red\bull[/tex] CurrentUsing Formula :
[tex] \star{\small{\underline{\boxed{\sf{ I = \dfrac{V}{R}}}}}}[/tex]
[tex]\small\blue\star[/tex] I = Current[tex]\small\blue\star[/tex] V = Voltage[tex]\small\blue\star[/tex] R = ResistanceSolution :
Substituting all the given values in the formula to find Current :
[tex]{\dashrightarrow{\pmb{\sf{ I = \dfrac{V}{R}}}}}[/tex]
[tex]{\dashrightarrow{\sf{ Current = \dfrac{Voltage}{Resistance}}}}[/tex]
[tex]{\dashrightarrow{\sf{ Current = \dfrac{120}{20}}}}[/tex]
[tex]{\dashrightarrow{\sf{ Current = \cancel{\dfrac{120}{20}}}}}[/tex]
[tex]{\dashrightarrow{\sf{ Current = 6A}}}[/tex]
[tex]{\star{\underline{\boxed{\sf{\red{ Current = 6A}}}}}}[/tex]
Hence, the Current is 6 Ampere.
[tex]\rule{300}{1.5}[/tex]
A(n) 1700 kg car is moving along a level road at 21 m/s. The driver accelerates, and in the next 10 s the engine provides 22000 J of additional energy. If 3666.67 J of this energy must be used to overcome friction, what is the final speed of the car
The final speed of the car at the given conditions is 30.1 m/s.
The given parameters:
Mass of the car, m = 1700 kgVelocity of the car, v = 21 m/sTime of motion, t = 10 sAdditional energy provided by the engine, E₁ = 22,000 JEnergy used in overcoming friction, E₂ = 3,666.67 JThe change in the energy applied to the car is calculated as;
[tex]\Delta E = E_1 - E_2\\\\\Delta E = 22,000 \ J \ - \ 3,666.67 \ J\\\\\Delta E = 18,333.33 \ J[/tex]
The final speed of the car is calculated as follows;
[tex]\Delta E = \frac{1}{2} m(v_f^2 - v_0^2)\\\\v_f^2 - v_0^2 = \frac{2\Delta E}{m} \\\\v_f^2 = \frac{2\Delta E}{m} + v_0^2\\\\v_f = \sqrt{ \frac{2\Delta E}{m} + v_0^2} \\\\v_f = \sqrt{ \frac{2\times 18,333.4}{1700} + (21)^2} \\\\v_f = 30.1 \ m/s[/tex]
Thus, the final speed of the car at the given conditions is 30.1 m/s.
Learn more about change in kinetic energy here: https://brainly.com/question/6480366
Using techniques similar to the aluminum foil lab, how could you do an experiment to determine the volume of the filled soda bottle? What factors might limit the accuracy of your experiment?
Answer:
applications of density measurements. The densities of brass and aluminum will be calculated from mass and volume measurements.
Explanation:
Calculate the Work done if the force is 2000 Newtons
and the distance is 5 km.
Answer:
10 million joules or 10,000 KJ
Explanation:
Work= Force x Displacement
convert 5km into meters -5km=5000m
W= 2000N x 5000m
w=10,000,000 Joules
or 10,000KJ
What’s 5.1 cm in Newton’s?
Need
Help answering the questions
batman recharges his bat taser with 2500 joules of energy in 15 minutes. how much power does it draw from the mains
Over a period of 2.50 seconds, a speedboat accelerates uniformly from 18.5 m/s to 46.5 m/s. What is the acceleration of the speedboat relative to the shore?
According to the question, the acceleration of the speedboat relative to the shore is found to be 11.2 [tex]m/sec^2.[/tex]
What is Acceleration?Acceleration may be characterized as the rate of change of the velocity of an object with respect to time. It is a vector quantity, as it defined both magnitude and direction. This allows you to measure how fast velocity changes in meters per second squared (m/s^2).
According to the question,
The initial velocity of the boat = 18.5 m/s.
The final velocity of the boat = 46.5 m/s.
Difference in velocity = Final velocity - Initial velocity = 46.5-18.5 = 28 m/s.
The formula for calculating the acceleration of the boat is as follows:
a = Difference in velocity/time taken.= 28/2.50 = 11.2 [tex]m/sec^2[/tex].
Therefore, the acceleration of the speedboat relative to the shore is found to be 11.2 [tex]m/sec^2.[/tex]
To learn more about Acceleration, refer to the link:
https://brainly.com/question/460763
#SPJ6
. What material does sound move quicker through?
Water
Air
Steel
Answer:
steel
Explanation:
the close molecules in solids allows sound to travel at a faster speed
Sound will move quicker through Steel than in water and air.
Sound: This can be defined as an audible form of energy, that is radiated outward from a source.
⇒ Generally,
Sound wave travels fastest in solid, more than in liquid or gas. This is because the molecules of solid are more closely together.
⇒ From the question above,
Water is a liquid materialAir is a gaseous materialSteel is a solid materialTherefore, sound will move quicker through Steel than in water and air.
Hence: sound will move quicker through Steel than in water and air.
Learn more about sound here: https://brainly.com/question/1199084
This is not meant to be a long, mathematically-intensive problem. If you find yourself going down that road, you might want to rethink your approach.
Answer:
rethink your approach to what?
Explanation:
Write a paragraph explaining how a pressurized garden sprayer works. Make sure todescribe what happens to the air pressure insidethe sprayer as it is pumped by hand.
The principle of operation of a pressurized garden sprayer is as follows;
A pressurized garden sprayer is a chamber which is filled with a liquid which can be a lubricant, paint or chemical, then filled with compressed air to allow the liquid to be sprayed at high pressure.
As it is pumped by hand, the compressed air with which it is filled serves the primary purpose of allowing the liquid to be sprayed at high pressure - an important requirement for performance characteristics of the sprayer.
Flammable liquids must not be used with such equipment.
Read more on pressurized sprayers:
https://brainly.com/question/8842747
effect of looping the loop
Answer:
What does this mean? please provide more explanation when asking for help
PLZZZ HELPPP ASAP
I really need help as soon as possible
Answer:
Friction
Explanation:
As the toy cars rolls away, more friction is created. The more friction there is, the more friction on surface rubs against another which creates friction which in-term slows it down. Hope this helps.
A car travels 120 miles in 12 hours. What is
the car's speed?
Select one:
O a. 10 m/s
b. 10 mph
c. 1200 mph
O d. 0.1 m/s
Answer:
I hope it will help you...
#CARRYONLERANING
