A.
B.
C.
D.

Help me please?

Answer:

2 degrees celcius

Explanation:

Answer:

114

Explanation:

plz make me brainiest

Answer: The IUPAC name of [tex]CH_3C\equiv CCH_2CH_2Cl[/tex] is 5-chloro-2-pentyne

Explanation:

1. First select the longest possible carbon chain.  For the number of carbon atom, we add prefix as 'meth' for 1, 'eth' for 2, 'prop' for 3, 'but' for 4, 'pent' for 5, 'hex' for 6, 'sept' for 7, 'oct' for 8, 'nona' for 9 and 'deca' for 10.

2. The longest possible carbon chain should contain all the bonds and functional groups.

3. The numbering is done in such a way that the carbon containing the functional group or substituent gets the lowest number.

4. The naming of alkane is done by adding the suffix -ane, alkene by adding the suffix -ene, alkyne.

Thus the IUPAC name of [tex]CH_3C\equiv CCH_2CH_2Cl[/tex] is 5-chloro-2-pentyne

Answer:

your answer will be photosynthesis

Explanation:

explanation

the chemical formula of water is H²O.

Hydrogen+Oxygen=water

answer

Hydrogen-Water-Hydrogen

Answer:

For evaporation you need a warm, preferably humid temperature. The rate of evaporation increases with an increase in temperature. A windy climate is best, as wind helps to remove the evaporated water vapour, and therefore creating a better scope for evaporation to continue. The speed of wind is important for evaporation because the wind pulls in dry air, increasing the rate of evaporation.

Short Answer- Hot and humid temperature, lots of wind speed.

Answer:

Explanation:

1 Evaporation is the phase change of a liquid to a gas. There are three very important requirements for evaporation to take place, 1) available energy, 2) available water, and 3) a vertical moisture gradient. Approximately 600 calories of heat must be added to a gram of water for it to evaporate into the air.

2. Evaporation is the process of a substance in a liquid state changing to a gaseous state due to an increase in temperature and/or pressure. It is a fundamental part of the water cycle and is constantly occurring throughout nature.

3.Water evaporates faster if the temperature is higher, the air is dry, and if there's wind. The same is true outside in the natural environment. Evaporation rates are generally higher in hot, dry and windy climates.

                                thank u

Answer:

the carbon monoxide will release blue fumes

Answer:

Two design criteria for the design of the ammonia making process are;

1) Sustainable hydrogen production by renewable energy

2)  Sustainable use of the ammonia-water thermal absorption cycle to retrieve the ammonia present in the waster water

Explanation:

Ammonia is produced from natural gas in the following process;

H₂ + RSH → RH + H₂S

H₂S + ZnO → ZnS + H₂O (Waste water)

CH₄ + H₂O → CO + 3H₂

CO + H₂O → CO₂ + H₂

Ammonia is then produced by reacting the produced hydrogen with nitrogen in the presence of a catalyst in a process known as the Haber-Bosch process as follows;

3H₂ + N₂ → 2NH₃

The

The design criteria for the design of the ammonia making process therefore as follows;

1) Sustainable use of renewable energy to produce hydrogen gas from the electrolysis of water

2)  Use of the ammonia-water thermal absorption cycle to retrieve the ammonia present in the waster water.

The branch of science which deals with chemicals and their bond is called chemistry.

The two ways by which we can design ammonia making process is as follows:-

Two design criteria for the design of the ammonia making process are:-

The usage of ammonia is important in these ways:-

Hence, these are the design for the ammonia-making process.

For more information, refer to the link:-

https://brainly.com/question/19524691

Answer:

According to the numbers 1-5;Aluminium,Mercury,Oxygen,Stainless Steel,Hydrogen gas.

Explanation:

Answer:

Scientists consider human to be" carbon creatures" because carbon atoms form the backbone or foundation of pretty much the essential biological molecules floating around in our bodies (except water, of course.) All in all, scientists can consider humans to be " carbon creatures" because our skin, hair and cells are all made out of molecules that contain huge amounts of carbon.

Hope this helps! God bless!

Answer:

The answer is A. Unlike other maps, topographic maps indicate man-made and natural landforms.

Explanation: Took the test and got 100% Edg. 2020

Answer:

A)Unlike other maps, topographic maps indicate man-made and natural landforms.

Explanation:

Answer:

dry ice

Explanation:

hope this helps

:)

Answer:

Dry Ice is the common name for solid carbon dioxide (CO2). It gets this name because it does not melt into a liquid when heated; instead, it changes directly into a gas (a process known as sublimation).

Explanation:

Answer:

Correct Option is Option A

A.)It became prey to certain organisms in the river.

Explanation:

CHECK COMPLETE QUESTION BELOW;

An invasive fish species was accidentally introduced into a river. At first, it experienced a sudden surge in its population. Then it experienced a steady decline. Which statements give plausible reasons for this trend?

A.It became prey to certain organisms in the river.

B.It lacked adaptations suitable for that particular ecosystem.

C.It had no predators in its new environment.

D.It had few organisms to compete with for resources.

Aquatic invasive species are species such as fish or invertebrate that is absorbed by new aquatic environment that are differ from their own natural environment.

When Aquatic invasive species found themselves in a new environment, at first they will experience a rapid increase in the number of their population this is because of the lack of natural predators in the new aquatic environment. As a result of this they bring about the alteration of food web structure, they take in charge of available food for the native species and compete with them. As a result of this competition involved there is a decrease in the population.

Therefore, the statements that gives plausible reasons for this trend is that became prey to certain organisms in the river.

Answer:

It became prey to certain organisms in the river.

It lacked adaptations suitable for that particular ecosystem.

Explanation:

Took the test on Edmentum

Answer:

A. 40 kPa

Explanation:

P(total) = P(O2) + P(N2) + P(CO2)

300kPa = 160 kPa + 100kPa + P(CO2)

P(CO2) = 300-160-100= 40 kPa

Answer: true

Explanation: hope this helpes

Answer:

TRUE

Explanation:

power derived from the utilization of physical or chemical resources, especially to provide light and heat or to work machines.

Answer:

the correct answers is "neutralize"

Explanation:

When an acid is related to a base or also called an alkali and they reach a pH of 7, this acid will be neutralized or it will be canceled as the question says.

This happens so it reaches an equilibrium between both compounds, where the solution medium where these two compounds are is NEITHER ACID NOR BASIC, that is why it is called NEUTRAL medium.

Whenever you read that the pH of a solution is balanced, a neutralized acid, or a ph7 it means that the solution is NEUTRAL.

Answer:The elements hydrogen, nitrogen, oxygen, fluorine, chlorine, bromine and iodine are diatomic elements

Definition of diatomic elements:Diatomic elements are special as the atoms that form it do not like to be alone. That is, you will never find a nitrogen or fluorine atom, for example, hanging out solo. Rather, these atoms will always be paired together because they need to pool resources to have enough electrons.

Answer:

H2, O2, N2, F2, Cl2, Br2, I2

Explanation:

These occur naturally has molecules of 2 atoms.

They are all gases except Br2, liquid and iodine which is solid.

Answer:

Basis and basic​ are two different words.

In English, Basis is used as a noun while basic is used as an adjective. Basis term refers as the base or starting point of any discussion.

For example: Bread is a basic ingredient of cake.

                      On the basis of Mendel's hypothesis.

In chemistry, Basis set is used as a set of functions that represent the electronic wave function in the density-functional theory which forms an  algebraic equations that can be easily implemented on a computer.

While Basic term is used for substances that can accept a hydrogen ion (H+) from another substance and have pH above 7. such as sodium.

So, It is not important that both the terms, basis and basic change their English meaning if used in chemistry, they both can be used with English meaning in chemistry as well. Bases and basic,​ both the terms can be used as either English or Chemistry without affecting the meaning.

Answer:

Read below

Explanation:

Melanoma -- the most virulent form of skin cancer -- is caused by harmful ultraviolet light from the sun. Australia's proximity to Antarctica, where there is a hole in the ozone layer that filters out UV rays, also increases the risk.

Answer:

In Austrailia there is the hieghest rate of skin cancer because there is so much sunlight in Austrailia and there some people that have sensitive skin and they get skin cancer easily/ fast.

Explanation: This answer is correct because my teacher gave me this answer.

Hope this was helpful if not plz don't report my answer plz.

Answer:

2.67761514 moles

Explanation:

0.075kg equates to 75g.

This means that the car emits 75g of CO per km.

dividing 75g by the molar mass of CO (28.01g/mol) we get 2.67761514 moles

Answer:

2

Explanation:

The compound H2CCH2 has the condensed formula C2H4. The name of the compound is ethene. The compound is unsaturated, that is, it contains multiple bonds. The compound has a formula which fits into the general molecular formulae of alkenes (olefins) which his CnH2n.

Olefins have a double bonds between the carbon atoms. That is , the two carbon atoms in Olefins are connected via a double covalent bond. This now implies that the two carbon atoms in ethene (C2H4) are connected by two covalent bonds in the lewis structure of the molecule as is common for Olefins.

In the Lewis dot structure for [tex]\rm H_2CCH_2[/tex], there is one covalent bond present between the carbon atoms. The correct answer is option c.

A dot structure is a method of depicting an atom's valence electrons by placing dots around the atomic symbol. One valence electron is represented by each dot.

In the Lewis dot structure of [tex]\rm H_2CCH_2[/tex], there is one bond between the carbon atoms. This is because each carbon atom has two electrons in its valence shell, and each hydrogen atom has one electron in its valence shell.

The two carbon atoms share two electrons to form one covalent bond, and each carbon atom also shares one electron with a hydrogen atom to form two additional covalent bonds.

Therefore, the correct answer is option c. There is one bond (covalent bond) between the carbon atoms in the Lewis dot structure for [tex]\rm H_2CCH_2[/tex].

Learn more about dot structure here:

https://brainly.com/question/28652824

#SPJ6

Answer: Yes

Explanation:

Answer:

trueeeeee

Explanation:

Answer:

Final volume of the gas is 4.837mL

Explanation:

Initial volume (V1) = 350mL = 0.35L

Initial temperature (T1) = 0°C = (0 + 273.15)k = 273.15k

Initial pressure (P1) = 1.0atm

Final volume (V2) = ?

Final temperature (T2) = 10°C = (10 + 273.15)k = 283.15K

Final pressure (P2) = 75atm

To solve this question, we'll have to use combined gas equation which is the combination of all gas law I.e Charle's laws, Boyle's law, Pressure law etc.

According to combined gas equation,

(P1 × V1) / T1 = (P2 × V2) / T2

Make V2 the subject of formula,

V2 = (P1 × V1 × T2) / (P2 × T1)

V2 = (1.0 × 0.35 × 283.15) / (75 × 273.15)

V2 = 99.1025 / 20,486.25

V2 = 0.004837L

V2 = 4.837mL

The final volume of the gas is 4.837mL

Answer:

4.84mL

Explanation:

Step 1:

Data obtained from the question. This include the following:

Initial volume (V1) = 350mL

Initial temperature (T1) = 0°C

Initial pressure (P1) = 1atm

Final temperature (T2) = 10°C

Final pressure (P2) = 75atm

Final volume (V2) =...?

Step 2:

Conversion of celsius temperature to Kelvin temperature.

This can be achieved by using the formula below:

T(K) = T (°C) + 273

Initial temperature (T1) = 0°C

Initial temperature (T1) = 0°C + 273 = 273K

Final temperature (T2) = 10°C

Final temperature (T2) = 10°C + 273 = 283K

Step 3:

Determination of the new volume.

The new volume can be obtained by using the general gas equation as follow:

P1V1/T1 = P2V2/T2

1 x 350/273 = 75 x V2/283

Cross multiply

273 x 75 x V2 = 1 x 350 x 283

Divide both side by 273 x 75

V2 = (1 x 350 x 283) / (273 x 75)

V2 = 4.84mL

Therefore, the new volume is 4.84mL

Answer:

NO most of the time

Explanation:

I hope this is for school and not personal reasons. Bleach will kill you if drank plain, if it's diluted a little it may not be fatal but can still greatly harm your organs. If it is diluted extremely it is used for cleaning tap water and is perfectly fine.

Just to be on the safe side, I want you to know there is always help, and if you need someone to talk or text this is the number for the National Su1c1de Hotline and it is free and available if you are ever feeling like self harm is the only way out:

800 273 8255

Answer:

endoplasmic reticulum:

✔ helps in the production and movement of materials

Golgi body:

✔ packages and distributes materials in and out of cell

mitochondrion:

✔ supplies energy that the cell uses

ribosome:

✔ produces proteins for the cell

Explanation:

I did it on Edge

The function of endoplasmic reticulum is it helps in production and movement of a material.

Endoplasmic reticulum is defined as a network of membranous tubules present within the cytoplasm of a eukaryotic cell.

It is one of the important organ of human body system which helps us in production and movement of material from one body part to another.  

Golgi body helps in packaging and distribution of material in and out of cells.

Mitochondrion supply the energy to the cell. It is called as a power house of cell.

Ribosome helps to produce protein for the cell. It is called as protein factory.

Thus, the function of endoplasmic reticulum is it helps in production and movement of a material.

To learn more about endoplasmic reticulum, refer to the link below:

https://brainly.com/question/1311891

#SPJ2

Answer:

I know the answer to 5, i think

Explanation:

Answer:

All the pure substances are made up of atoms and group of atoms known as molecules. They also have weight, volume and colour white solids also have the shape and hardness or texture. Pure substances also have points at which they boil and solidify.

Answer:

Pure substances are defined as substances that are made of only one type of atom or molecule. The purity of a substance is the measure of the extent to which a given substance is pure.

Explanation: