Answer:
energy
Explanation:
The First Law of Thermodynamics (Conservation) states that energy is conserved, it cannot be created nor destroyed.
A chemist dilutes a 1.0 ml sample of 2.0 m kno3 by adding water to it. if the concentration of the solution that is obtained is 0.0080 m, what is its volume? use m subscript i v subscript i equals m subscript f v subscript f.. 125 ml 250 ml 500 ml 2,000 ml
A chemist dilutes a 1.0 ml sample of 2.0M KNO₃ by adding water to it. If the concentration of the solution that is obtained is 0.0080 m, then its volume is 250mL.
How do we calculate volume?Volume for the given equation will be calculated by using the below equation as:
M₁V₁ = M₂V₂, where
M₁ = molarity of KNO₃ = 2M
V₁ = volume of KNO₃ = 1mL
M₂ = molarity of final solution = 0.0080M
V₂ = volume of final solution = ?
On putting these values on the above equation, we get
V₂ = (2)(1) / (0.0080) = 250mL
Hence option (2) is correct.
To know more about molarity, visit the below link:
https://brainly.com/question/24305514
Answer:
B. 250 mL
Explanation:
Correct on Edge 2022!!!
Good luck everyone, you got this! Have a great day!
(40) If a hypothesis is proven correct, a theory is formulated.
True or false
Answer: False, I believe.
Explanation: If a Hypothesis is proven correct, then another experiment to strengthen that Hypothesis is should be done.
What do the following organic chemicals have in common glyphosphate, lindane, 2,4-d, chlordane
Glyphosphate, lindane, 2,4-d, chlordane are organic compound that have chlorine in common.
What is Organic compound?Organic compound are group of chemical substance that have carbon and hydrogen atoms in which the bonds are covalently linked together.
Therefore, Glyphosphate, lindane, 2,4-d, chlordane are organic compound that have chlorine in common and these chemicals are use as herbicides that is kill weeds, or to kill insects or pests because of chlorine present in it.
Learn more about organic compounds here.
https://brainly.com/question/14102593
Check all reasons why a book was used.
it increased pressure on the gas.
it supported additional weights.
it balanced the syringe.
We can confirm that for the experiments regarding Boyle's law, the book was used to increase pressure on the gas and add additional weight.
Why is the book used in these experiments?The book is used for the reasons described in options 1 and 2 of the question. The book supports additional weights on the container, meaning that through these added weights we can increase the pressure being applied to the gas and see how said pressure affects the volume of a gas.
Therefore, we can confirm that the book was used to increase pressure on the gas and add additional weight.
To learn more about Boyle's law visit:
https://brainly.com/question/1437490?referrer=searchResults
Answer: A, B
Explanation: edge2023
Please help !!!!! I need this for Chemistry class
Answer: Silver has the highest temp. change and water has the lowest temp. change.
Explanation:
According to the specific heat capacity, water has lowest specific heat and greatest is that of silver owing to their temperature differences.
What is specific heat capacity?
Specific heat capacity is defined as the amount of energy required to raise the temperature of one gram of substance by one degree Celsius. It has units of calories or joules per gram per degree Celsius.
It varies with temperature and is different for each state of matter. Water in the liquid form has the highest specific heat capacity among all common substances .Specific heat capacity of a substance is infinite as it undergoes phase transition ,it is highest for gases and can rise if the gas is allowed to expand.It is different for different substances.
It is given by the formula ,
Q=mcΔT
Learn more about specific heat capacity,here:
https://brainly.com/question/29766819
#SPJ7
What is an ionic solid?
A. A crystalline solid held together by a shared electron pool
B. A crystalline solid held together by dipole-dipole forces
C. A crystalline olid held together by covalent bonds
D. A crystalline solid held together by charge attractions
Answer:
D
Explanation:
An ionic solid is a crystalline solid held together by charge attractionsAn example is a salt crystal (Na⁺ + Cl⁻ → NaCl)An ionic solid is a crystalline solid held together by charge attractions or an ionic bond.
What is an ionic bond?
Ionic bond or electrovalent bond is a type of bond which is formed between two elements when there is an exchange of electrons which takes place between the atoms resulting in the formation of ions.
When the atom looses an electron it develops a positive charge and forms an ion called the cation while the other atom gains the electron and develops a negative charge and forms an ion called the anion.
As the two atoms are oppositely charged they attract each other which results in the formation of a bond called the ionic bond.They are good conductors of heat and electricity. They have high melting points. These compounds are brittle.
Learn more about ionic bond,here:
https://brainly.com/question/11527546
#SPJ2
Can someone please help me?? :(
Answer:
A and B is the answer
Answer:
option b
Explanation:
giving brainliest please help!
Answer:
pretty sure it is
2
1
2
3
1
2
Explanation:
How much heat is absorbed when 70 grams of
water is completely vaporized at its boiling
point?
Answer:
Thus, the joules of heat absorbed when 70.0 grams of water is completely vaporised at its boiling point are 158,200.
What would be the mass of 9.76 x 1022 formula units of SrCla?
Answer:
25.7 g
Explanation:
I don't know what to put here hahaha, I hope my answer helps you ^^
In a redox reaction, which ion would you expect to be more easily reduced?.
Which scientist first applied DNA Analysis techniques to crime scene evidence?
a)Tommy Lee Andrews
b)Colin Pitchfork
c)Stephen Jones
d)Alec Jeffreys
A car is accelerating from rest at a rate of 2 (m/s)/ s. How fast will it be going after 4 seconds?
Answer:
8 m/s
Explanation:
The Formula
v = u + at⇒ v = final velocity
⇒ u = initial velocity
⇒ a = acceleration
⇒ t = time taken
Given
u = 0 [rest]a = 2 m/st = 4 sSolving
v = u + atv = 0 + 2(4)v = 8 m/sTo what volume should 0.0667 mol of KCl be diluted in order to prepare a 0.250 M solution?
To prepare 0.250 M solution, the 0.0667 mol of KCl should be diluted up to 266.8mL
StoichiometryFrom the question,
We are to determine to what volume the KCl should be diluted, in order to prepare 0.250 M solution
From the formula,
Numer of moles = Concentration × Volume
Then, we can write that
[tex]Volume= \frac{Number\ of\ moles}{Concentration }[/tex]
From the given information,
Number of moles = 0.0667 mole
Concentration = 0.250 M
Then,
[tex]Volume = \frac{0.0667}{0.250}[/tex]
Volume = 0.2668 L
Volume = 266.8 mL
Hence, to prepare 0.250 M solution, the 0.0667 mol of KCl should be diluted up to 266.8mL
Learn more on Stoichiometry here: https://brainly.com/question/16632398
giving brainliest please help!
Answer:
the reaction will shift right towards products
Explanation:
Which of the following is a structure of a cow?
O Possessing sharp teeth.
O Having hooved feet.
O Coming when called.
O None of the above.
Answer:
None of the above.
Explanation:
None of thesse things are part of the structure of a cow, cows have dished forhead 4 stomachs and angular body not sharp teeth comin when called or hooved feet.
How may using sorbents to clean an oil spill be helpful to the ecosystem?
Answer:
Are sorbents good for the environment?
Natural Inorganic Sorbents
Second, sorbents that sink should not be used as they could be harmful to the environment. Sinking is a problem with many sorbents, such as untreated peat moss, most inorganic sorbents, and many wood products.
Its major result is to clean out some surface contaminants, which makes it simpler for oil to absorb. On the other hand, pyrolysis, a high-temperature thermal treatment, causes the sorbent to carbonise. In turn, this greatly improves the oil sorption capacity and oil to water selectivity.
What are the advantages of using sorbents?When recovering adsorbent materials that cause secondary contamination, lighter, less viscous oil is lost through the pores more readily than heavier, more viscous oils. Application is simple because sorbents can be applied automatically or manually to spills using blowers or fans.
The best sorbents for recovering oil are typically synthetic ones. In some circumstances, a weight ratio of 40:1 for oil to sorbent can be reached, as opposed to 10:1 for organic compounds and only 2:1 for inorganic materials.
A substance used to absorb or adsorb liquids or gases is known as a sorbent. Examples comprise: a substance that works via adsorption and is comparable to molecular sieve material (attracting molecules to its surface). It has strong thermal conductivity and a big interior surface area.
Thus, On the other hand, pyrolysis, a high-temperature thermal treatment, causes the sorbent to carbonise.
To learn more about sorbents, follow the link;
https://brainly.com/question/10506730
#SPJ2
A liquid has an empirical formula CCl2, and a boiling point of 1 21 oC. When vapourised, the gaseous compound has a density of 4.93 g/L at 785torr and 1 50oC. What is the molar mass of the compound and what is its molecular weight?
Based on the data given, the molar mass of the gas is 165.5 g/mol while the molecular weight of the gas is 165.5 amu
How can molar mass of a gas be obtained from density, temperature and pressure?The molar mass of a gas can be obtained from density, temperature and pressure using the formula below:
molar mass = density × molar gas constant × temperature/pressureMolar gas constant, R = R = 0.082 L.atm/mol/K.
Temperature = 150 °C = 423 K
Pressure = 785 torr = 1.033 atm
density = 4.93 g/L
molar mass of gas = 4.93 × 0.082 × 423/1.033
molar mass of gas = 165.5 g/mol
Then, molecular weight of the gas = 165.5 amu
Therefore, the molar mass of the gas is 165.5 g/mol while the molecular weight of the gas is 165.5 amu
Learn more about molar mass of a gas at: https://brainly.com/question/26215522
What is the mode of action of sulfonamides?
inhibition of protein synthesis
inhibition of cell wall synthesis
disruption of folic acid synthesis
disruption of membrane structure
Answer:
b is the correct answer inhibition of cell wall
Hey there!
Sulfanilamide is the classification of the antibiotics that can target the bacteria that’s causing infections.
But the action of the mode of sulfanilamide is: binding of a specific enzyme which simply translates to inhibition of the cell wall
Thus, your answer is: inhibition of cell wall synthesis (Option B.)
Good luck on your assignment & enjoy your day!
~Amphitrite1040:)
Is iron conducting electricity a physical, or chemical change?
Answer:
Its a chemical conducting electricity
What are the five major lines of latitude?
Answer: Arctic Circle, Tropic of Cancer, Equator, Tropic of Capricorn, and the Antarctic Circle. Hope this helps.
what are difference between graphite and diamond
Answer:
[tex]Diffrence \: between \: graphite \: and \: diamond [/tex]
[tex]\qquad \huge{\sf{point \: 1}} ➫[/tex]
⇛Graphite is soft in nature
⇛Diamond is hardest substance
[tex]\qquad \huge{\sf{point \: 2}} ➫[/tex]
⇛Graphite is a good conductor
⇛Diamond is not a conductor
[tex]\qquad \huge{\sf{point \: 3}} ➫[/tex]
⇛Graphite is grey in colour
⇛Diamond have transperant look
[tex]\qquad \huge{\sf{point \: 4}} ➫[/tex]
⇛Graphite have SP² hybridization
⇛Diamond have SP³ hybridization
[tex]\qquad \huge{\sf{point \: 5}} ➫[/tex]
⇛Graphite have layered structure
⇛Diamond have crystalline structure
Which is the goal of technology?
to expand comprehension
to make life easier
to apply knowledge
to improve communication
Answer:
B. To make life easier.
Explanation:
Although all of the above makes sense, the answer should be B. because it is to help improve how we live.
I hope it helps! Have a great day!
Muffin~
The goal of technology is to make life easier.
What is goal?A goal is "an idea of the future or desired result that a person or a group of people envision, plan and commit to achieve".
What is technology?
Technology is "the use of scientific knowledge for practical purposes or applications, whether in industry or in our everyday lives".
Hence, the goal of technology is to make our life better.
To learn more about technology here
https://brainly.com/question/27354061
#SPJ2
Describe what happens to the light ray when it travels through air then into water
Answer:
when light travels into the water from the air, it slows down (because water is a more dense substance) which causes it to change direction and makes it seem to bend. this is called refraction. mediums that are more dense have a higher refraction index. for example, air has a ri of 1, but water is about 1.33.
PLEASE HELP!!!!
What are examples of pollution that can result from mining operations?
Answer:
Acid mine drainage
metal contamination,
increased sediment levels in streams
Explanation:
ACID MINE DRAINAGE
Mine waste, heavy metals and acidic water often end up in streams and rivers.
METAL CONTAMINATION
Heavy metals also affect the biodegradability of organic pollutants, making them less degradable and thus causing double the effect of polluting the environment.
Answer: salt and petroleum
Explanation:
Just took this today and im pretty sure this is the right one
I need a mnemonic for the reactivity server of metals please
Potassium
Sodium
Lithium
Calcium
Magnesium
Aluminium
Carbon
Zinc
Iron
Nickel
Tin
Lead
Hydrogen
Copper
Mercury
Silver
Gold
Platinum
Explanation:
Lithium Sodium Potassium group 1
Hydrogen proton +1
Iron Fe2+
What component of the human epidermis functions to make the skin's surface extremely tough and resistant to bacterial enzymes?
keratin
proteases
dermis
hypodermis
Answer:
Keratin :)
Explanation:
Heres a link to learn more about this question: https://brainly.com/question/13022311 :)
Have an amaazing day!!
Please rate and mark brainliest!!
What is a technique for gene therapy?
Answer:
For gene therapy, stem cells can be trained in a lab to become cells that can help fight disease. Liposomes. These fatty particles have the ability to carry the new, therapeutic genes to the target cells and pass the genes into your cells' DNA.
Mark me as brainlest please!
Mass number is the number of?
Answer:
mass is the amount of matter in an object
Explanation:
Hi can someone please help me find the average for these temperatures? I need them asap
Answer:
55 degrees F - cold water
120 degrees F
the last on I don't know
